This is UNOFFICIAL TWRP for the Pixel C. That said, the TeamWin team greatly helped me in getting this working. But at the same time, neither TeamWin nor me take any responsibility whatsoever for any undesired outcome resulting from any kind of use of this project and project files! If you don't exactly know what you're doing then just walk away and do something good. Don't touch any options of which you don't exactly know what they're for!
What works:
* So far, everything; encryption support should work, but some feedback on this would be welcome
Problems:
* The GUI will be sometimes slow, sometimes super slow. This is probably due to the high screen resolution of the Pixel C.
How to install:
- Unlock bootloader
- In the bootloader, run "fastboot flash recovery <.img file>"
- Reboot into Pixel C bootloader
- Boot into recovery (or later on/from Android through "adb reboot recovery")
If the recovery doesn't stick after booting into Android:
- Do the install procedure as above
- Do NOT reboot into Android
- Press Vol-Down + Power until you see the bootloader menu
- Select "Boot into Android Recovery"
- When in TWRP, mount system
- Using TWRP's File Manager, or using adb, delete the file "/system/bin/install-recovery.sh"
- Reboot
After doing this, OTAs won't work any longer, but they wouldn't work anyway after installing TWRP. Just so you know
DOWNLOAD
twrp-3.0.0-0-dragon-ryu-02-11-2016-1.img
SHA1 hash: 3e97aae6cc18975683eda2bd3732faaecec14166
Changelog
:: 01-19-2016-1
- Removed screen timeout by default, since the GUI is very slow and the screen unlock slider is very hard to use
- Added an option to fix the Fastboot Full Cap flag directly from TWRP; you find the option in "Advanced". If the Pixel C should ever not let you flash in fastboot, boot into TWRP, select Advanced -> Fix Fastboot, swipe to confirm, and you're set.
:: 02-11-2016-1
- Rebased on twrp/android-6.0 branch (i.e. upgraded to TWRP 3.0.0-0)
The recovery is based on the Pixel C stock kernel.
Awesome! I can survive without root for the time being but being able to enable multiwindow would be amazing!
Thanks!
Edit: I am getting a FAILED (remote: unsupported command) error and cant flash this. Anyone know a work around?
Worked fine for me with "fastboot flash recovery [image name]" did you unlock your bootloader? Also root works just fine, you just have to boot from your PC.
Sent from my Pixel C using Tapatalk
brando56894 said:
Worked fine for me with "fastboot flash recovery [image name]" did you unlock your bootloader? Also root works just fine, you just have to boot from your PC.
Sent from my Pixel C using Tapatalk
Click to expand...
Click to collapse
I did unlock my bootloader but can't get anywhere. Tried updating my sdk, drivers everything. I guess I will have to keep playing with it.
Edit: I relocked my bootloader, and then unlocked it again and now it is working. If anyone else runs into this give it a try.
it successfully installed on my pixel c. is reachable as the Android Recovery option. and boots to bootloader to allow boot of boot.img
this is a good thing. thanks to all involved.
it's been 1 month since release and good way to celebrate.
Good work. Thanks you
hooray thanks! just to clarify: I need encryption disabled to use twrp or just to flash SuperSU?
I'm currently using phhusson's noverity boot-img to boot and with a modified vendor img root is working fine while encryption is enabled ... just having to boot via fastboot every time is a bit awkward. And since I don't know what happens if the device got stuck and reboots itselfe without the modfied boot it would be awesome to have at least a nandroid backup
doumer said:
hooray thanks! just to clarify: I need encryption disabled to use twrp or just to flash SuperSU?
I'm currently using phhusson's noverity boot-img to boot and with a modified vendor img root is working fine while encryption is enabled ... just having to boot via fastboot every time is a bit awkward. And since I don't know what happens if the device got stuck and reboots itselfe without the modfied boot it would be awesome to have at least a nandroid backup
Click to expand...
Click to collapse
Hey... You can use TWRP even with encryption enabled, you just can't write anything to /data.
However for the next build I'm going to enable TWRP's decryption option and see if it works with the Pixel C. If it does I'll post a new build this evening (European Time).
I tried the systemless SuperSU on a decrypted /data partition but it wouldn't work (bootloop), clearly there's a lot of ground to cover here, but like I said maybe the decryption functionality will help us here.
EDIT: I'm also working on a boot.img with disabled forced encryption. Looks like we're going to get proper root very soon.
cheep5k8 said:
This is UNOFFICIAL TWRP for the Pixel C. That said, the TeamWin team greatly helped me in getting this working. But at the same time, neither TeamWin nor me take any responsibility whatsoever for any undesired outcome resulting from any kind of use of this project and project files! If you don't exactly know what you're doing then just walk away and do something good. Don't touch any options of which you don't exactly know what they're for!
What works:
* Well, basically everything IN TWRP works, it's just that without a kernel that disables forced encryption this is not of very much use. I tried flashing SuperSU, but it wouldn't work properly.
Problems:
* The GUI will be sometimes slow, sometimes super slow. This is apparently still a problem with how TWRP uses the graphics mode that is used on the Pixel C. Best is if you immediately disable the screen lock once you boot into TWRP because the unlock slider is abysmally sluggish.
How to install:
- Unlock bootloader
- In the bootloader, run "fastboot flash recovery <.img file>"
- Reboot into Pixel C coreboot bootloader
- Boot into recovery (or later on/from Android through "adb reboot recovery")
DOWNLOAD
2.8.7.0-01082016-1
Click to expand...
Click to collapse
Hello thank you for this. Yesterday I tried to build as well twrp but it wasn't fully working.
I just imported this config with TW_INCLUDE_L_CRYPTO := true && TW_INCLUDE_CRYPTO := true
I didnt copy paste the twrp.fstab I added but added its path to BOAR_smthing.
Also I used omnirom's android-6.0 revision with dragon's device tree.
The recovery seems to boot, as
Code:
adb devices
returns XXXXXx recovery.
Also I can reach the device's shell with adb shell. Just the screen stays black.
I was wondering if I missed something. Is your device tree available online ?
Khaon said:
Hello thank you for this. Yesterday I tried to build as well twrp but it wasn't fully working.
I just imported this config with TW_INCLUDE_L_CRYPTO := true && TW_INCLUDE_CRYPTO := true
I didnt copy paste the twrp.fstab I added but added its path to BOAR_smthing.
Also I used omnirom's android-6.0 revision with dragon's device tree.
The recovery seems to boot, as
Code:
adb devices
returns XXXXXx recovery.
Also I can reach the device's shell with adb shell. Just the screen stays black.
I was wondering if I missed something. Is your device tree available online ?
Click to expand...
Click to collapse
Not yet. I'm going to upload it later on to the TWRP devs for official inclusion.
You need to merge the minui patch so TWRP can use DRM for video on the Pixel C; there is no fb0 device.
there were some new boot images out today. i flashed one of them. when i boot to recovery the sdcard is not able to be mounted. do you have any suggestions on what i need to do or look at in order to get it fixed?
dkryder said:
there were some new boot images out today. i flashed one of them. when i boot to recovery the sdcard is not able to be mounted. do you have any suggestions on what i need to do or look at in order to get it fixed?
Click to expand...
Click to collapse
Because /data is (force-)encrypted. I uploaded a new TWRP build with various fixes but decryption doesn't work.
What I also found out is that the boot image for the Pixel C is NOT an Android boot image (!), but a ChromeOS one. This puts a lot of things in doubt, for example I am not sure if systemless SuperSU can handle this.
But, I'm working on all that (working on boot img without forced encryption right now, but so far it doesn't want to boot completely)
OK, so, I'm running the device unencrypted now, but there are many issues still to resolve.
OK guys, if you really want actual SuperSU, and other root stuff, and decrypted /data, here's how it works but it's complicated and will only work tethered as far as I can tell.
First, download this boot image: dragon-boot-encryptable-01092016-1.img
Now here are the steps:
- make sure you have a stock boot.img handy in case something goes wrong (as usual I can not take responsibility but chances of bricking are extremely slim if you know what you're doing)
- boot into fastboot
- flash the above boot image to boot ("fastboot flash boot dragon-boot....")
- flash the TWRP recovery (latest version) ("fastboot flash recovery twrp-dragon-...")
- hold power+vol down pressed.. the device will turn off, keep it pressed even as it turns off, it will turn on again and you are in the coreboot menu
- select "Android Recovery" which will start TWRP
- in TWRP, select system as read only when it asks ("never write onto the system partition").. my boot image does not disable dm-verity which seems to be still in effect, so if you change /system, the Pixel will refuse to boot (even though it's unlocked... no idea)
- once in TWRP, go to "Wipe" and then choose at the bottom "Format Data" (just wiping will not work)
- when that's done stay in the recovery
- get SuperSU 2.66 from somewhere and flash it through TWRP (using sideload for example)
- when it's done, go to "Backup" in TWRP and only backup boot (the kernel) - no password - no compression
- somehow copy the backed up kernel from the device to your computer ("adb pull" for example), but in no case let the Pixel boot into Android
- when that's done, tell TWRP to boot back into the bootloader
Now get ready to be real quick...
- boot (just boot, not flash) the TWRP backed up boot image (it's 32MB large and called boot.emmc.win, but it's all good): "fastboot boot boot.emmc.win" (and now you have to be rather quick)
- It will boot up for a second and then go back to the "The OS will boot in 30 seconds screen"
- Again press power+vol down and hold it, even as the device turns off, until you're in the coreboot bootloader
- There, choose fastboot again
- And once again boot the boot.emmc.win image ("fastboot boot boot.emmc.win")
- Now let it boot up
- If everything went OK you should be in Android, with decrypted /data, and SuperSU should be installed and working
If you want to avoid being encrypted again (although SuperSU should survive that) you will have to boot tethered everytime using that boot.emmc.win image.
Known Issues: Somehow because /data is decrypted, "Security" settings in Android will crash. Hopefully you don't need anything in there. You might also want to skip setting a lock pattern or pin when doing the initial setup, it might crash too.
So far, I tried installing AdAway using root which worked just fine.
If someone figures out how make this untethered: you da real MVP!
Thank you sir!! I will report back if I encounter any undocumented issues.
OK so I've managed to install Xposed, was pretty straightforward except for the tethered boot. Still looking into making it untethered.
since your modified boot and no encryption it seems to be smoother in graphics. in any event, the thing worked in format of data and install of the supersu zip. so, well done.
cheep5k8 said:
How to install:
- Unlock bootloader
- In the bootloader, run "fastboot flash recovery <.img file>"
- Reboot into Pixel C coreboot bootloader
- Boot into recovery (or later on/from Android through "adb reboot recovery")
DOWNLOAD
2.8.7.0-01082016-2 UPDATE: Includes various fixes from first build; decryption of data does NOT yet work
Click to expand...
Click to collapse
So, followed these instructions and whenever I try to reboot into recovery I get the no command screen. Am I missing something? lol
Edit: So figured thats the stock recovery stuff. Got to the stock recovery but can't get into twrp
2nd Edit: I redownloaded the file and didnt rename it shorter this time and now it works...weird
cheep5k8 said:
Not yet. I'm going to upload it later on to the TWRP devs for official inclusion.
You need to merge the minui patch so TWRP can use DRM for video on the Pixel C; there is no fb0 device.
Click to expand...
Click to collapse
Thank you for those informations .
Thank you so much for this! Aside from the laggy UI, which isn't an issue since we got TWRP (f yes!!!), this is amazing. Do you foresee any issues flashing fonts? I am not familiar with ChromeOS and Android structure combination as it seems there is a lot of talk about. Flashing a file that replaces the stock fonts with the ones of my choosing hypothetically should not pose a problem to /system/fonts/, correct? Thank you for your work
Related
LAST PERSONALLY Verified as working and "stable"*: GAPPS, 8/19 GAPPS
First and foremost, I'm simply compiling this for the OnePlus 6 and am making some small tweaks to include Opengapps and not only Go Apps in the builds.
The parent for this by phhusson can be found at [Resurrection Remix] [Unofficial] [2018-05-19] Phh-Treble
Next the most important information where to get the most current build of the ROM: Google Drive
For now I suggest the version ending in -go such as: 'rr_6_1_180616_system-arm64-ab-go.img.xz' as the '-gapp' is in development, I expect a number of builds over the next few days as I finally the build scripts and then the rate to tapper off to every two weeks or as there are changes that seem to warrant it, I'm not building nightly for no reason, as RR 6.1 is reasonable stable at this time.
Note: Attached (build.sh) is the build script currently being used, it is a work in progress. and will be updated in case you more regular builds. You will need 12GB of Ram Ubuntu 16.04+ (I'm using 18.04 now, but I started with 16.04) and at least 360GB (SSD recommended) to build, and upto 6 hours for the initial run and then 2 for ever additional run.
Many thanks to phhusson for allowing me to post this based off of his work.
Changes, when I have something to report. Not all build will:
The 7/7 build includes a number of patches recommended by DocRambone.
Overlay support to force Apps fullscreen, Under Display->Advanced
Some cleanups to the UI for the round corners
Better LED support
The 7/8 build is the same as 7/7, but includes July security patches, I built it in order to match the official release.
The 7/24 build is again to match the official release
The 8/19 build is again to match the official release, note regression in status bar height I'm looking into.
Second post: will have details on what is working and not
Third Post: will have full instructions on installation, backup restore based on my experiences
* Stable is relative, for me if I consider it usable from day to day it is stable.
As of 8/11/2018
In the GAPPS version
Working:
Fingerprint
Camera (Front and Back) + Flash (Also got the OnePlus Camera working*)
Speaker
Wifi (Some cut outs seen, this is not unique to this ROM and is dependent on the access port some are worse than others, no clue why)
Bluetooth
GPS
Brightness
Slider for Notifications as of 6/18 build
Mobile Data/Voice (tested dual SIMM is working)
Google Apps
Root (using magisk 16.3), told but have not personally tested that 16.4 without changes works as well
Ambient (works serious effect on battery see next post)
Full Screen Aspect Ratio Display->Advanced 7/07/2018 build+
More fully functional LED Improved for at least mounting USB sticks in 7/7 build
USB Host - Fixed for at least mounting USB sticks in 7/24 build
Bluetooth Phone audio is on the local headset. - Fixed in 7/24 build
Seems working NFC working 5.1.11 Vendor and Boot, not working with previous to 5.1.9 Vendor and Boot I have nothing to connect to to fully test
Not Working:
The Notch hides content (need to wait for P)
Unknown:
Camera Quality: I do little with the camera and am no photographer, so I can say nothing about quality, only it installed and took pictures
VaSU# said:
volte kinda works you can receive messages and calls and can send messages but cant call "out"
Click to expand...
Click to collapse
Please let me know if anything is missing, or needs to be added
Instructions to flash, backup ...
WARNING: With 5.1.8 I had no WIFI, so I suggest sticking to 5.1.6 to 5.1.7 FOR THE MOMENT
Instructions to flash, backup ...
Total time required about 90 minutes
Pre-Reqs:
First and foremost:
Start with at least 5.1.6 (or greater, as of writing 5.1.7 was the lastest), there are Treble fixes in 5.1.6 we need.
Second
verify you have a good USB cable (the Red one shipped with the phone is best)
Three
download the oneplus drivers and abd
- USB Drivers: OnePlus 6 USB Drivers for Windows
- ADB/Fastboot: ADB/Fastboot latest mini
Install both to your local system
Four
Download the latest TWRP (get both the img and zip files)
TWRP for OnePlus 6
Five
Download the files(Treble OP6 Files 5.1.6) from:
GUIDE] How to flash Treble roms on OnePlus 6
Extract and keep: vbmeta.img (if you are on 5.1.X where is the boot version you can keep the boot.img as well, if not discard).
Six
Download the lastest Oxygen OS ZIP and bootloader from:
[OnePlus 6][ROM][OTA][Oxygen OS] Mirrors for official Oxygen OS ROMs and OTA updates
As of writing this is:
5.1.6 full image: OnePlus6Oxygen_22_OTA_010_all_1806070151_ad8b19ed516e78.zip
5.1.6 boot: OnePlus6Oxygen_22_OTA_010_all_1806070151_boot.img
Seven
Download Device ID:
Device+ID APK
Eight
Download Magisk for Treble:
Magisk modified for treble
Since as of 6/2018 the default magisk does not support Treble we need a special version I suggest: Magisk-v16.3-factory-faizauthar12-20180406.zip as teh latest I could find with support.
Nine
Recommended download fastboot installable 5.1.6 (or latest build):
[ROM][STOCK][FASTBOOT][OP6] Stock Fastboot ROMs for OnePlus 6
Ten
Include Overlay/Ambient Display.
Download APK at: [Overlay] Enable Night Light, Auto-Brightness, Ambient Display & more on Treble ROM
Eleven
OnePlus Camera:
OnePlus Camera APK's
Finally
Download RR 6.0 for Treble compiled after 7/08/2018:
Either download the gapps or go version (gapps is still a work in progress when I wrote this)
ROMs Google Drive
Getting Ready:
WARNING: you will loss all data on your phone, backup anything you want or need, first.
Make sure you can get to fastboot (enable "Advanced Reboot" in developers options and make sure that you can enter on a reboot by pressing volume-down and power at the same time)
Make sure you are on 5.1.6+ (5.1.6 was the latest firmware upon writing this)
Remove Any security you have set (just to be safe)
Reboot to fastboot (bootloader)
run:
Code:
fastboot oem unlock
"You will be greeted with a Unlock Bootloader Warning page, Hit the Vol button to select Yes and turn it Blue and Hit the Power Button to Execute the selection, allow your device to reboot"
Backup EFS
If you have not already I'd recommend backing up EFS (to do so you need to be rooted, or else use TWRP):
Preferred, if rooted simply open a terminal and run:
Code:
su
dd if=/dev/block/sdf2 of=/sdcard/modemst1.bin bs=2048
dd if=/dev/block/sdf3 of=/sdcard/modemst2.bin bs=2048
Copy these files someplace safe!
If not rooted reboot to fastboot (bootloader):
Ensure that the latest twrp is in the same directory as fastboot (C:\Program Files (x86)\Minimal ADB and Fastboot) and run (3.2.1 was the lastest as of writing this):
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
This will boot the phone into twrp
Allow modification
Select backup
select only EFS and Modem
enter a meaningful name
swipe to backup
click "Reboot System" -> "Do not Install" for TWRP if asked.
You can now locate the backup under /storage/TWRP/BACKUPS and move it to a safe location off the phone.
Backup the Phone
Recommended if you care: Backup your entire phone using TWRP as well:
Ensure that the latest twrp is in the same directory as fastboot (C:\Program Files (x86)\Minimal ADB and Fastboot) and run (3.2.1 was the lastest as of writing this):
- fastboot.exe boot twrp-3.2.1-0-enchilada.img
This will boot the phone into twrp
Allow modification
Select backup
Select Everything except EFS and Modem
enter a meaningful name
swipe to backup
click "Reboot System" -> "Do not Install" for TWRP if asked.
You can now locate the backup under /storage/TWRP/BACKUPS and move it to a safe location off the phone.
Installing RR:
Finally we are ready to install RR (or any other Treble ROM), on the OnePlus 6. You will need a build from 6/7/2018 or later to have the required Vender-Hal to be present.
You will need to locate and install the AB version for the OnePlus 6.
Note: I'm using RR from 6/13 as the base for the guide: system-arm64-ab-gapps.img
SEE FIRST POST FOR CURRENT DOWNLOAD LOCATION I compiled this using phhusson's (Orginial Build Scripts)
instructions and a bit of setup on Linux. However most Treble base ROM's should work so long as they are from after 6/7/2018 in a similar manor.
* Remember this will wipe your device and you will loss all data *
First
boot in to fastboot (bootloader):
We need to go back to TRWRP and wipe internal storage and data to be safe, as the -w option to do so when flashing is not working for me.
- fastboot.exe boot twrp-3.2.1-0-enchilada.img
This will boot the phone into twrp
Allow modification
Select Wipe
Advanced Wipe
Select Cache, Data and "Internal Storage"
Swipe to Wipe
Click back until you are at the main menu
Click on Reboot
Click on Bootloader -> "Do not Install" for TWRP if asked.
Second
Flash the new ROM:
Flash vbmeta.img to remove validation
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
To be safe flash a default boot image (5.1.6 in this case)
Code:
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
Next reboot into recovery (you need to do this with volume down +Power, or selecting from bootload):
In stock recovery select English
Select Wipe Data and Cache
Reset system settings->yes->done
Wipe Cache->Yes->done
Erase everything->Thiscan not be undone, continue->done
back
Advanced
Reboot to fastboot->Reboot to fastboot
Now flash a the new ROM:
- fastboot flash system_a system-arm64-ab-gapps.img
- fastboot flash system_b system-arm64-ab-gapps.img
Three
reboot:
Code:
fastboot reboot
You will see the "andorid" boot screen (this is different that the Oxygen one) and being the first boot it could take a while. If you see no boot screen or it does not boot (give 10 minutes), then you likely need to repeat these steps again. If you boot into RR then continue.
You may get a Vender image mistake error ignore it it only appewars on boot.
Skip the Setup by clicking all four corners top left->top right->bottom right->bottom left (it my take more than one try), at this point you have no networking, that is what we want.
Suggestion make backup here as you have a working OS! -- Instructions to follow
Four
Move over required files: You now have RR installed and working:
Enable developer mode and then enable Advanced Reboot
Then copy over gapps-nano, Device+ ID.apk, magisk-manager apk and magisk installer zip to the phone
To get the magisk manager you need to extract it from the zip as I cloud not get the normal one to install. Extract the zip: Magisk-v16.3-factory-faizauthar12-20180406.zip copy common\magisk.apk to the phone
Five
Deal with: "Play Services not Certified by Google":
Install Device+ID (APK downloaed above) and Open
Once done open the second line shows the GSF ID for this device
Android Register GSF
Login using a gmail account (I suggest the one you use for the playstore)
Enter the GSF in the field, now we wait about 5 to 10 minutes for it to propigate
Reboot the phone as we want paly services to start fresh
First add a wIFI network.
Critical do not let any apps update until you have registered playstore, so if you see a notification saying downloading, select and click pause. Doing so with the updated 6/17 paystore resulted in a black screen where you would enter your password, no know work around other than reset if this happens.
click on playstore it should now start
Now login to your account and you should be go (it may take more than one attempt no idea why).
Now enable the update if previously paused
Update all Apps from the playstore before continuing, this may take a while give it 10 minutes
Optional: If you want remove Device+ID now (but I leave it as it is an easy way to get information).
You now have a working Playstore, if you have hung downloads then you may need to clear the cache for play services and the playstore I assume the unregistered might be the cause of them getting messed up.
Five
Install magisk:
Ensure you copied magisk zip and also the magisk manager apk to your phone, do not open, but click Done
Install the magisk manager, by locating the file in filemanager and selecting it.Reboot into fastbboot (bootloader) mode
Load TWRP:
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Install
Select the magisk zip from the filesystem and flash
clear cache
Reboot->System (If asked about installing TWRP swipe to install)
Allow the phone to fully boot
Suggested: Reboot the phone
Suggested: disable checks for updates as 5.7 does not work with this build.
Root is now setup.
Six
Installer th onPlus camera:
Many people want the one plus camera, copy the apk downloaed above to the phone.
Open and install via a file manager
Seven
resize Data (as it will be only 11GB), the partitioon will be larger, depending on your devide se we will use TWRP and resize2fs to grow it.
Reboot into fastbboot (bootloader) mode
Load TWRP:
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Advanced->Terminal
Code:
resize2fs /dev/block/sda17
Reboot System
Eight
Recommended, make a backup of your hard work:
Reboot into fastbboot (bootloader) mode
Load TWRP:
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Select backup
Select Everything except EFS and Modem (as I'm unsure exactly which you need)
enter a meaningful name
swipe to backup
click "Reboot System" -> Swipe to reboot
Once back in RR copy the backup off the phone
Eight
Start using your OnePlus 6 with RR 6.0, rooted and with GAPPS
Nine
Upgrading:
Upgrading is simply replacing the system partitions and only these paritions (tested going from 6/13->6/16->6/17 builds)
Boot into fastboot (advanced reboot options)
Now flash the new system files:
- fastboot flash system_a new_system-arm64-ab-gapps.img
- fastboot flash system_b new_system-arm64-ab-gapps.img
Load TWRP:
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Select Wipe
Advanced Wipe
Select Cache (and only Cache)
Swipe to Wipe
Reboot System
Ten
Restoring a Backup from TWRP
*This is a work in progress I can not work out how to do so safely*
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Select Restore
Select the backup
Select Everything (other than EFS and Modem!)
Got to the main menu
Select Wipe
Advanced Wipe
Select Cache (and only Cache)
Swipe to Wipe
Reboot Fastboot
Eleven
Night Light, Ambient Display, requires Root:
My suggestion is not to do this if you care abut battery as I've seen major drain (even with Ambient display disabled, testing this).
Copy the apk downloaded framework-res__auto_generated_rro.apk to /vendor/overlays
Code:
mount -o rw,remount -t ext4 /vendor
cp <location of file> /vendor/overlay
chcon u:object_r:vendor_overlay_file:s0 /vendor/overlay;chcon u:object_r:vendor_overlay_file:s0 /vendor/overlay/framework-res__auto_generated_rro.apk
Reboot
Comments:
TWRP does not boot if flashed onto RR (the TWRP logo appears but it will not boot), this is currently only go to protect you from using the OnePlus Recovery and messing up RR. Flashing TWRP does not affect booting into RR.
TWRP DOES handle encryption without an issue, even a wrong first pin is not an issue
TWRP making a backup of Treble ROM, backup everything for now: Data, Boot, System, System Image, Vendor, Vendor Image.
If you have problems with hung downloads from the Playstore: Pending hung PlayStore
Wifi can be flaky (appearently this is a more general issue as even stock had some issues, I fixed them by only using either 2.4 or 5Mhz wireless, if I had both active I had constant disconnects.
Worst case, to recovery, back to Oxygen 5.1.6 if you end up in a boot loop stuck booting to rtecovery, etc:
- flash-all.bat
Reboot into recovery (you need to do this with volume down +Power, or selecting from bootload):
In stock recovery select English
Select Wipe Data and Cache
Reset system settings->yes->done
Wipe Cache->Yes->done
Erase everything->This can not be undone, continue->done
back
Advanced
Reboot to fastboot->Reboot
Load TWRP:
Code:
fastboot.exe boot twrp-3.2.1-0-enchilada.img
Copy the Oxygen full ROM back to the phone
Code:
adb push OnePlus6Oxygen_22_OTA_010_all_1806070151_ad8b19ed516e78.zip /sdcard
In TWRP
Install
Select OnePlus6Oxygen_22_OTA_010_all_1806070151_ad8b19ed516e78.zip
Go back to the root and select Advanced Wipe
Select Wipe
Advanced Wipe
Select Cache, Data and "Internal Storage"
Click on Reboot->Recovery (select Do not Install)
English
Wipe Cach and Data
Wipe Everything
Reboot
The phone will reboot same as the day it was made
If it does not then please refer to:
Mega Unbrick Guide for A Hard Bricked OnePlus 6
Note: Always boot fully at least once (I suggest twice and the first one is configuring android) before trying any steps above again.
Best of Luck, see a typo let me know
ERIC
thank you for this
[emoji102][emoji102][emoji102][emoji102][emoji102]
Sent from my ONEPLUS A6003 using Tapatalk
Thank you for putting so much hard work on this. Really much appreciated, will give it a try.
Might be a noob question, but due to treble, is the camera quality the same with the OnePlus app?
saintxseiya said:
Might be a noob question, but due to treble, is the camera quality the same with the OnePlus app?
Click to expand...
Click to collapse
No.
Great rom, I especially like the fact that I can choose to install without gapps (prefer fdroid). One thing that is missing is ambient display, hopefully it will be fixed sooner or later.
Stock OOS Cam on RR. Isn't that huge news? Wow! :good:
Abaddon said:
No.
Click to expand...
Click to collapse
Have you tried this yourself? Ignore the treble part of his comment, but why would stock cam on OOS vs stock cam on custom ROM give different results in terms of picture quality?
Pat123 said:
Stock OOS Cam on RR. Isn't that huge news? Wow! :good:
Have you tried this yourself? Ignore the treble part of his comment, but why would stock cam on OOS vs stock cam on custom ROM give different results in terms of picture quality?
Click to expand...
Click to collapse
same quality here
Pat123 said:
Stock OOS Cam on RR. Isn't that huge news? Wow! :good:
Have you tried this yourself? Ignore the treble part of his comment, but why would stock cam on OOS vs stock cam on custom ROM give different results in terms of picture quality?
Click to expand...
Click to collapse
Never said anything about results, only that it could be installed and works, (takes pictures), personally I do little with the camera and am not photographer, but it can be installed (link above) and installed.
Updated the working to remove any confusion.
Maibol said:
same quality here
Click to expand...
Click to collapse
Could you post some comparison pics? Including portrait shots.
Would be awesome.
saintxseiya said:
Could you post some comparison pics? Including portrait shots.
Would be awesome.
Click to expand...
Click to collapse
sorry bro celebrating today with the family too much beer .....
So seeing this not even a month after the release of the op6 makes me happy and hopeful that we get a fully working RR-OS for the OP6 in the near future !
Pat123 said:
Stock OOS Cam on RR. Isn't that huge news? Wow! :good:
Have you tried this yourself? Ignore the treble part of his comment, but why would stock cam on OOS vs stock cam on custom ROM give different results in terms of picture quality?
Click to expand...
Click to collapse
because Oneplus doesnt release blobs for camera
Pat123 said:
Stock OOS Cam on RR. Isn't that huge news? Wow! :good:
Have you tried this yourself? Ignore the treble part of his comment, but why would stock cam on OOS vs stock cam on custom ROM give different results in terms of picture quality?
Click to expand...
Click to collapse
It will never be the same as OOS stock. Because aside from there is no device tree provided by OnePlus, they will never release the camera blobs due to licensing issues. Once we get a stable and proper gcam port. It'll be better than the stock OOS cam or close
is a beautiful Rom, will there be an adaptation for twrp? I have to use the gapps, because at the go version Wear OS does not work. and in the gapp version would be nice if the smartbar was running. Unfortunately, the kill app does not work ( I can not use xposed, then my bank app will not work anymore
unix2208 said:
is a beautiful Rom, will there be an adaptation for twrp? I have to use the gapps, because at the go version Wear OS does not work. and in the gapp version would be nice if the smartbar was running. Unfortunately, the kill app does not work ( I can not use xposed, then my bank app will not work anymore
Click to expand...
Click to collapse
TWRP not for now as treble is build as an image, but you should be able to flash using twrp just switch to img (though I have not tested that).
The GApps version is posted the 6/18 is working great, see second post.
As for Banking I'm unsure if any Treble based ROM passed the checks, as with or without root, as they appear as unsigned.
As for smartbar, I'll give it a try when I get a chance, as I do not use it personally.
ERIC
So safetynet won't pass?
Team Win Recovery Project 3.x, or TWRP3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
[I]#include <std_disclaimer.h>
/*
* Your warranty is not void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/[/I]
Note: Please be aware that you cannot install this without a kernel with LZMA compression support, I believe most ROMs have included my commit for this so you should be good for all custom ROMs and kernels. If not please file a request to the maintainer.
In addition, please be aware that TWRP is currently not compatible with Android 10. If you would like to use TWRP you will need to go back to Android 9. If you would like more information you can read at the link here.
Not a huge problem, stock users can just temporarily boot TWRP if you have access to a PC.
Not compatible with Android Q.
Pixel devices have 2 "slots" for ROMs / firmware. TWRP will detect whichever slot is currently active and use that slot for backup AND restore. There are buttons on the reboot page and under backup -> options to change slots. Changing the active slot will cause TWRP to switch which slot that TWRP is backing up or restoring. You can make a backup of slot A, switch to B, then restore the backup which will restore the backup of A to slot B. Changing the slot in TWRP also tells the bootloader to boot that slot.
Installation:
If you already have TWRP installed: Download the latest zip and install the zip using TWRP.
If you do not already have TWRP installed: Download both the img and the zip. You will need to have fastboot binaries and the correct drivers installed. Power off your device completely. Hold volume down and turn on the device. Your device should now be in the bootloader. Connect the device to your PC. Open a command window and run the following command from the proper location:
fastboot boot path/to/twrp.img
This will temporarily boot TWRP on your device. Use ADB or MTP to transfer the zip onto your device.
Go to install and browse to the zip and install the zip. The zip will install TWRP to both boot slots. Installing TWRP at this time will remove root if you are currently rooted.
If you accidently flash TWRP to your device using fastboot instead of temporarily booting the image, you will need to download the latest factory image for your device and reflash the boot image.
Changelog:
[BETA]
3.3.1-0: Initial release for Pixel 3A XL devices
3.3.1-1: Fixed having to manually change slots before rebooting.
3.3.1-2: Updated to July blobs!
3.3.1-3: Can now install TWRP to boot image. ADB, MTP, LOGD, Repack Tools and Logcat have all been removed to save the necessary space for this to work. You can grab stuff while in the OS, then flash it in TWRP (Keep in mind I have only tested this on stock as of now, feel free to test it on whatever ROM you use. It should work, but let me know if it doesn't).
3.3.1-4: Changed back to LZMA compression, also added back all the features besides ADB/Logcat. As long as your kernel supports LZMA you will be able to take advantage of installing it permanently without having to worry about space restrictions.
3.3.1-5:
Add persist entry to fstab
* To allow TWRP to store a backup settings file on /persist
and also to be used as QCOM time fix source during early boot.
Revert "Don't include logcat."
Revert "Don't include repack tools."
3.3.1-6:
Revert "Revert "Don't include repack tools.""
Add haptics firmware.
* This obviously on it's own isn't enough to get haptics working for the 3A in TWRP, but its a start.
Don't include a precompiled update_engine_sideload
* This should fix the issue of flashing officials for StatiXOS
[STABLE]
3.3.1-0: Initial official release!
Download:
https://twrp.me/google/googlepixel3axl.html
XDA:DevDB Information
TWRP, Tool/Utility for the Google Pixel 3a XL
Contributors
ZVNexus, janjan
Source Code: https://github.com/TeamWin/android_device_google_bonito
Version Information
Status: Stable
Current Stable Version: 3.3.1-0
Stable Release Date: 2019-07-17
Current Beta Version: 3.3.1-6
Beta Release Date: 2019-06-27
Created 2019-06-27
Last Updated 2019-11-15
Reserved
Awesome! Thank you so much!
So as of this moment, there is only the ability to boot to twrp via fastboot?
DriveEuro said:
Awesome! Thank you so much!
So as of this moment, there is only the ability to boot to twrp via fastboot?
Click to expand...
Click to collapse
Yeah, having some issues actually installing it to the boot image. Should be fixed rather soon, just decided to post. Maybe I shoulda waited a bit longer, idk.
So does anyone know if TWRP + Magisk work on Android Q for root?
ZVNexus said:
Yeah, having some issues actually installing it to the boot image. Should be fixed rather soon, just decided to post. Maybe I shoulda waited a bit longer, idk.
Click to expand...
Click to collapse
I don't mind, I haven't flashed TWRP to a device since Treble came out, but it's easy enough to boot an image, so at least for my usage case, this is all I need
otg mounting problem
ZVNexus said:
Yeah, having some issues actually installing it to the boot image. Should be fixed rather soon, just decided to post. Maybe I shoulda waited a bit longer, idk.
Click to expand...
Click to collapse
no you shouldn't have waited!! thanks a lot specially from all of us checking if twrp came out every day!
hey maybe you can give me a tip since i have a problem mounting otg:
when i boot twrp image if i go to backup/select storage i find a storage/usb partition (0MB)
when i connect otg (and go to mount) it becomes storage/usbotg 1 (12000MB)
but the problem is that if i click it doesn’t remain selected, and the log reports “Unable to find partition for the path ‘/storage’ ”
if i go to mount or backup/select storage and click usbotg 1 storage it doesn’t remain selected and the log reports “E: unable to locate partition for ‘/storage/usbotg-1’ ”
(i’ve tried also with different keys but i don't think it's the point anyway the 1st was an 256GB usb/SD and the 2nd a 16GB usbkey but logs reports same error)
any tip?
I'm on Q DP4. Anyone having luck flashing Magisk (canary)? In B slot it fails to mount system and vendor. I change to A slot. It completes. I reboot on A slot, I get stuck at Google starting logo and the phone never boots. If I attempt to boot B slot afterwards, it boots up fine, but I obviously don't have Magisk installed, verified with the Magisk APP.
Anyone have a clue?
Just to provide feedback.
Fastboot booted the image, it prompted for my pin, mounted system, and was able to backup properly, moved backup to computer.
Wiped the phone, reboot and went through setup, everything was working.
Back to twrp, adb pushed the backup to the phone, restored the backup and everything was functioning.
Also tested and was able to sideload flash Magisk.
So everything seems to be working as intended.
Thank you so much for your hard work!
My TWRP is NOT prompting for pin/pattern. That has to be part of this...
Wiped data via google recovery. The phone booted to Pie (i had previously did the OTA from Pie to Q beta 4). So now I'm back on Pie somehow (without reflashing). I booted to TWRP, installed Magisk successfully.
So overall, I'm not sure if this was related to Q beta 4 OTA occupying B slot while Pie still was on A slot.
Thanks to all for their work with TWRP!
Antonyo13 said:
Just to provide feedback.
Fastboot booted the image, it prompted for my pin, mounted system, and was able to backup properly, moved backup to computer.
Wiped the phone, reboot and went through setup, everything was working.
Back to twrp, adb pushed the backup to the phone, restored the backup and everything was functioning.
Also tested and was able to sideload flash Magisk.
So everything seems to be working as intended.
Thank you so much for your hard work!
Click to expand...
Click to collapse
On previous devices I have run into TWRP restore issues if I had a security PIN set on the device when I backed up. During your test did you have a PIN setup on the phone?
artiemon said:
On previous devices I have run into TWRP restore issues if I had a security PIN set on the device when I backed up. During your test did you have a PIN setup on the phone?
Click to expand...
Click to collapse
I had a pattern, not sure if it makes a difference between pattern and pin.
I will say the only thing weird i noticed was when i wiped the phone (the default wipe from twrp, not a full format of data from twrp), when i booted I was prompted for my pattern on first unlock before the device setup. Even though it was wiped.
But restoring was perfectly fine.
Antonyo13 said:
I will say the only thing weird i noticed was when i wiped the phone (the default wipe from twrp, not a full format of data from twrp), when i booted I was prompted for my pattern on first unlock before the device setup. Even though it was wiped.
But restoring was perfectly fine.
Click to expand...
Click to collapse
That is normal on pixels. If you factory reset in TWRP your password still stays
spaceman860 said:
That is normal on pixels. If you factory reset in TWRP your password still stays
Click to expand...
Click to collapse
Thank then everything is working great. No issues at all with TWRP
So just confirming - I am , I assume encrypted , as I have a PIN and a pattern with DU ROM. Can i safely backup the existing ROM and flash another and then be able to restore if need be using this version of TWRP?
jcrompton said:
So just confirming - I am , I assume encrypted , as I have a PIN and a pattern with DU ROM. Can i safely backup the existing ROM and flash another and then be able to restore if need be using this version of TWRP?
Click to expand...
Click to collapse
Yes. This is how it has worked in the past. Don't see why it wouldn't work like this currently. If you flash a different vendor image or system image, you'll want to revert back before you restore your old ROM backup.
DriveEuro said:
Yes. This is how it has worked in the past. Don't see why it wouldn't work like this currently. If you flash a different vendor image or system image, you'll want to revert back before you restore your old ROM backup.
Click to expand...
Click to collapse
Revert back to what? Sorry I don't understand?
Flash back the original vendor and system images.
GQJ said:
Revert back to what? Sorry I don't understand?
Click to expand...
Click to collapse
He was answering my question about hypothetical referring back to a prior rom from a backup
neshipda said:
no you shouldn't have waited!! thanks a lot specially from all of us checking if twrp came out every day!
hey maybe you can give me a tip since i have a problem mounting otg:
when i boot twrp image if i go to backup/select storage i find a storage/usb partition (0MB)
when i connect otg (and go to mount) it becomes storage/usbotg 1 (12000MB)
but the problem is that if i click it doesn’t remain selected, and the log reports “Unable to find partition for the path ‘/storage’ ”
if i go to mount or backup/select storage and click usbotg 1 storage it doesn’t remain selected and the log reports “E: unable to locate partition for ‘/storage/usbotg-1’ ”
(i’ve tried also with different keys but i don't think it's the point anyway the 1st was an 256GB usb/SD and the 2nd a 16GB usbkey but logs reports same error)
any tip?
Click to expand...
Click to collapse
I didn't test OTG before I uploaded, didn't have an OTG cable, but now that I know its a problem I'll look into it.
This version of TWRP works on both the TB-X605F (wifi) and TB-X605L (LTE). It does not work for the TB-X605FC/FL (Tab M10 FHD Rel).
Warning: this TWRP is for the Lenovo Smart Tab M10 with the Snapdragon 450 (SDA450) chipset. This image will not work for the second gen M10 (TB-X606F/L), which use a Mediatek SOC. See this thread.
For the M10 HD (TB-X505F/L), see this thread. For the TB-X505X, see this thread.
Code:
#include <std_disclaimer.h>
/*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Possible issues with TB-X605L
If the latest version of TWRP for TB-X605F doesn't work for your TB-X605L model, try version 3.4.0-0 from twrp.me.
Installation
TWRP for this device is officially supported. You can download it from twrp.me or in the TWRP App (from the PlayStore). Installation instructions are included on twrp.me.
It is recommended that you also install Magisk. This will ensure TWRP remains your default recovery.
Step-by-step guide
download TWRP to your PC (see the Download section below)
download magisk.zip to your MicroSD or OTG device. Get the latest Magisk zip file here.
if your bootloader is already unlocked, go to step 4. To unlock bootloader:
on tablet: go to Settings->System->About and press "Build number" 7 times to enable Developer Options.
on tablet: go to Settings->System->DeveloperOptions. Turn on: "OEM unlocking" and "USB debugging".
connect tablet to your computer. Tablet will ask for permission to "Allow USB debugging". Tick "always allow" and select "OK".
backup any files you want to keep to an external device (MicroSD/OTG/computer), because the next step will wipe all your photos, files, google account etc on the tablet.
Now unlock the bootloader:
Code:
adb reboot bootloader
fastboot oem unlock-go
fastboot reboot
flash the twrp image:
Code:
adb reboot bootloader
fastboot flash recovery twrp.img
if you haven't loaded Magisk yet, go to step 6. If you have already loaded Magisk, you can just reboot and you're finished:
Code:
fastboot reboot
adb reboot recovery
load Magisk (step one): reboot to recovery. Do not reboot into the system, because it will over-write TWRP with stock recovery. If that happens, go back to step 4 and start again. When you issue the reboot command (below), you have to immediately press the button combination to reboot to recovery (TWRP). Here are the steps:
issue the reboot command:
Code:
fastboot reboot
immediately press and hold all three buttons (Pwr+VolUp+VolDown). The tablet might reboot twice. Release all the buttons when you see the TWRP screen, or hear your PC acknowledge that ADB is connected.
load Magisk (step two): flash Magisk. In TWRP:
select "Install"
use "select storage" to locate device you stored magisk.zip on.
press the OK button
select the Magisk zip file
swipe to confirm Flash
when Magisk is finished, hit the back button to go back to main TWRP screen.
select "Reboot" then "System"
if the Magisk Manager app wasn't automatically loaded, you can get it here.
finished!
If you prefer to use button combos, rather than fastboot/ADB commands:
Vol Down + Power = fastboot mode
Vol Up + Vol Down + Power = recovery mode
Changelog
Code:
02/03/2022 - TWRP 3.6.1_9: new TWRP release
23/11/2021 - TWRP 3.6.0_9: new TWRP release
01/01/2021 - TWRP 3.5.0-0: new TWRP release
21/11/2020 - TWRP 3.4.0-1: new official version with SPL patch
19/11/2020 - promoted security patch level to 2099-12-31. No need to worry about SPLs ever again.
02/09/2020 - promote security patch level to 2020-08-01 for TB-X605F_S210208_200807_ROW
06/08/2020 - officially supported
31/07/2020 - upgrade to TWRP 3.4.0-0
- data decryption working (security patch 2020-04-01)
- landscape mode (by popular demand)
- add more partitions to Backup options
15/01/2020 - reverted to API 28 (Android Pie)
- renamed "sdcard1" to "external_sd"
- changed [ro.build.incremental.version] in preparation for OTA #4
24/11/2019 - fixed date/time & EDL reboot mode
- dropped back to API 27
20/11/2019 - initial commit (API 28) - encryption/decryption not working
Downloads
official
TWRP for X605F: twrp.me
Source code
github.com/minimal-manifest-twrp/platform_manifest_twrp_omni/tree/twrp-9.0
github.com/TeamWin/android_device_lenovo_X605F (official)
github.com/Yahoo-Mike/recovery_device_lenovo_X605F (unofficial)
FAQ
See the third post for answers to some FAQs like:
Will this TWRP work with other M10 and P10 devices?
Why is my "Data" partition empty (0 MB)?
how do I root my device?
Credits
The guys at TeamWin Recovery Project.
Everyone whose device trees I plagiarised from GitHub.
The amazing work of @Chaser42, @Long_Sam and others to get this project started.
XDA:DevDB Information
X605F Recovery, Tool/Utility for the Lenovo Thinkpad Tablet
Contributors
Yahoo Mike, Chaser42
Source Code: https://github.com/TeamWin/android_device_lenovo_X605F
Version Information
Status: Testing
Created 2019-11-19
Last Updated 2022-05-22 (v3.6.1 and warning for TB-X605L)
Encryption/Decryption
When you load the stock ROM, it creates and automatically encrypts the data partition. If you are not using the correct TWRP version, the data partition might be empty (0 MB). This is because TWRP failed to decrypt the data partition.
If your data partition is 0MB in TWRP, make sure you have loaded the latest version of TWRP (Nov 2020 or newer). Older builds required the security patch levels to match on TWRP and your system.
If you want to remove encryption completely, then you can use the dm-verity-forceencrypt tool. @turboperson123 has put together some instructions to remove encryption. If you've already loaded TWRP, then you only need to follow steps 6 and 7 from that post. @turboperson123 's method uses @Zackptg5 's Universal DM-Verity, ForceEncrypt, Disk Quota Disablers tool to remove encryption and dm-verity.
FAQs
Can I use this TWRP on other M10 and P10 tablets?
There are quite a few variants of these Tabs that use the Snapdragon 450 (SDM450) chipset:
TB-X605F (Tab M10 wifi) - tested working this TWRP
TB-X605L (Tab M10 LTE) - tested working with TWRP ( thanks @alexupsa )
TB-X705F/L (Tab P10) - no. Use the twrp available on this thread.
For the TB-X505F/L (M10 HD) see this post.
NOTE: the TB-606F/L (M10 2nd gen), TB-X605FC (M10 FHD) use different chipsets, so this TWRP won't work.
Why is my "Data" partition 0MB?
See the second post in this thread.
What should I backup?
Short answer: everything.
But the bare minimum might include:
System Image
Vendor Image
Firmware/Modem
Persist
Data
Cache
Boot
How do I root my device?
To root your device, here are the instructions for the:
X705F (thanks to @Chaser42)
X605F/L - follow steps 6 & 7 in the OP above. If you don't want to load TWRP, then try something like @Long_Sam's patched boot.img method.
X505F/L - follow the "step by step guide" in the OP above. Just make sure you use twrp for X505F (not for X605F).
How do I load OTAs with TWRP?
Note: if you ran the dm-verity-forceencrypt tool to unencrypt your /data, then the steps below will not work.
select "uninstall" in the Magisk Manager app. If MM doesn't reboot the system, then reboot - this will re-install stock recovery.
install the OTA (either in the system or using stock recovery).
re-flash TWRP (for the new security patch level)
re-install Magisk
TB-X605L working properly. Thank you!
TB-X605L working properly. Thank you!
Yahoo Mike said:
This is a work in progress. Volunteer testers are very welcome.
Click to expand...
Click to collapse
Wow...
That's really huge...
As we say here : "Monsieur, chapeau bas !"
Long_Sam
Lenovo has released quite a few variants of the Tab M10 now. I'm not sure this TWRP will work on all of them.
There are now even variants of a variant !
Code:
[B]M10[/B] with SDM-450 models: X605F (wifi) & X605L (LTE)
[B]M10 HD[/B] with SDM-429 models: X505F (wifi), X505L (LTE) & X505X (LTE Bands 1,2,3,4,5,7,8,20,38,40)
[B]M10 FHD[/B] with SDM-450 models: X605FC (wifi) & X605LC (LTE)
The M10 I have is shipped with a Snapdragon 450 (SDM-450) chipset & Hardware Code 63. But I see on their US site that Lenovo are now putting the SDM-429 in the X605. This might cause a problem with TWRP. I'm not sure if the kernels will be compatible.
The TWRP I've posted is for the X605F/L SDM450 (HW=63). I might need to compile a different TWRP for the SDM429 versions of the X605 & the X505.
If your X605 or X505 shipped with the SDM429, can you let me know if this TWRP works ? I need to know the Hardware Version, CPU and Hardware Code. Hardware Version and CPU are in System->About. The Hardware Code is in brackets after the S/N on the sticker on the back of the tablet, eg S/N Hxxxxxxx (63).
If you have an X605FC/LC, let me know if this TWRP works. I think it will, but I want make sure.
I have one with the 429 TB-X505F SD429 HW71 If i get some time today I might be bale to try it. I'll post soon as I do.
This morning I successfully compiled and ran the P10 kernel source on my M10. I had to tweak the config a bit. I tested it in TWRP. No problems.
Tomorrow, I'll inject it into the boot.img of the system ROM and see what happens. If it is mostly stable, then we're on the way to LOS for the M10. If it's completely stable, I'll push the source up to github.
I'll continue to use the stock kernel for the released versions of TWRP in this thread, though.
Thanks to @clsA for helping me work out that the M10 kernel is a subset of the P10 kernel.
@Yahoo Mike
thx for the twrp
succesfully flashed on my X605L
"Stock recovery image (recovery_stockROM.img) from TB-X605F_USR_S200065_1905280020_Q00332_ROW - just in case something goes wrong & you need to restore stock recovery. Only use this image on a TB-X605F. If you need it for any other variant, just ask in this thread and we'll track it down for you."
do you have the stock recovery for the X605L ?
how can i backup "DATA" inside twrp ?
will this help ?
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
OSIRIS2010 said:
...
do you have the stock recovery for the X605L ?
Click to expand...
Click to collapse
Now I think of it, you don't need it. If TWRP fails to flash, then stock recovery will still be there. If stock recovery is still not loading, just boot into the system and shutdown. When you shutdown, the system will re-flash stock recovery for you.
OSIRIS2010 said:
...
how can i backup "DATA" inside twrp ?
Click to expand...
Click to collapse
Have a look at the second post.
TL;DR...the dm-verity-forceencrypt tool will do it. But it will break the next OTA. The unencrypted P10 guys are having problems at the moment with this.
I've tried to get TWRP to unencrypt the data partition, but I can't get KeyMaster to initialise successfully. Maybe the next version of TWRP will be able to do it.
Yooo. Sorry I took so long works been crazy. I cant get it to reboot into twrp recovery. Its flashes the 605 recovery then I follow the next steps in the guide but I can only get it to reboot to the stock recovery screen. Run the reboot recovery command then immediately hold the volume + - down along with power. I tried a lot I let reboot twice then let off, and nothing then I tried several more times. Reflashing then the next step. I must not be holding my mouth...err I mean pushing the buttons right or the recovery just isn't gonna work. Add I'm very newbie at rooting and customizing. I've I've rooted one phone. A 70$ moto g5 plus I got off Ebay that was basically brand new. Installed twrp recovery and magisk. I bought that cause I have SD note 9 I cant root and have this need to play YouTube videos in my truck lol. Let me know if you have any suggestions I can try. Or ideas that might make it work. I pretty much fubard the tab and (at a different time) before I tried this recovery and was able to reflash stock img though odin.
11mackey11 said:
Yooo. Sorry I took so long works been crazy. I cant get it to reboot into twrp recovery. Its flashes the 605 recovery then I follow the next steps in the guide but I can only get it to reboot to the stock recovery screen. Run the reboot recovery command then immediately hold the volume + - down along with power. I tried a lot I let reboot twice then let off, and nothing then I tried several more times. Reflashing then the next step. I must not be holding my mouth...err I mean pushing the buttons right or the recovery just isn't gonna work. Add I'm very newbie at rooting and customizing. ...
Click to expand...
Click to collapse
Don't be too hard on yourself...you've done well to get this far.
I just had a quick look at the kernel for the X505F. It's very different from the X605F. So this TWRP definitely won't work for you. Sorry.
If you want me to build a TWRP for the X505F, PM me and we'll work something out.
How do you remove twrp I think that or magisk is giving me the booting issues. Half the time I reboot for things it gets stuck. Not sure if it's root or twrp but I can't seem to remove either.
cbomb1337 said:
How do you remove twrp I think that or magisk is giving me the booting issues. Half the time I reboot for things it gets stuck. Not sure if it's root or twrp but I can't seem to remove either.
Click to expand...
Click to collapse
If you uninstall Magisk, then the system will overwrite TWRP with stock recovery the next time you reboot. Just tap "uninstall" in the Magisk Manager app. You can also remove Magisk from TWRP following these instructions.
What kind of boot issues are you having? Are you using a TB-X605F with SDA450? Or is it something similar?
I am using Tb 605f it seems to be booting fine now after removing this riru module and edxposed. I'll just leave that and stick with just viper 4 Android lol
Do you know if them modules for increasing speed work? I think one of them was called fde and there the doze one.
cbomb1337 said:
I am using Tb 605f it seems to be booting fine now after removing this riru module and edxposed. I'll just leave that and stick with just viper 4 Android lol
Do you know if them modules for increasing speed work? I think one of them was called fde and there the doze one.
Click to expand...
Click to collapse
Good to hear it's all working again.
Sorry, I haven't tried any of those tweaks.
Lenovo have updated the stock ROM they serve for the TB-X605F through LMSA rescue. It's now at TB-X605F_USR_S210126_1910290024_Q00332_ROW. This is the latest update. There are no OTAs to apply. The M10 is due for a security OTA pretty soon, though. The P10 has already received it.
Unfortunately, it's no longer possible to post a direct link to Lenovo's website for this ROM. You'll have to use LMSA to get it.
FYI. Lenovo have changed how they serve the stock ROM. The ROM is now kept at rsdsecure-cloud.motorola.com. LMSA seems to generate (or request and receive) a one-off time-limited credentialed ticket for the download. You can't download the zip files without the credentials attached to the URL.
If you really want to, you can still intercept the URL in download_resources.json in the LMSA download folder.
is there anything new in the update. i might hold of because i dont want to lose root.
cbomb1337 said:
is there anything new in the update. i might hold of because i dont want to lose root.
Click to expand...
Click to collapse
No, there's nothing new. This isn't really an update, it just seems to be a consolidation of the old stock ROM and incremental OTAs.
This is only for M10 wifi (TB-X605F) with SDA450.
The latest OTA for TB-X605F has just landed. It's available on your tablet, or directly from: TB-X605F_USR_S210126_191029_Q00332_ROW_TO_TB-X605F_USR_S210152_200120_Q00332_ROW_WCE26E2CD5.zip.
The update takes the M10 to:
Code:
build: TB-X605F_USR_S210152_200120_ROW
security patch: 1 January 2020
kernel: 3.18.120-perf-gd60e12b6-dirty
If you have TWRP and root, you'll need to:
select "uninstall" in the Magisk Manager app
install the OTA (from SD card) in recovery and reboot
re-flash TWRP
re-install Magisk
only if you unencrypted the data partition
If you have unencrypted your data partition, it will be re-encrypted during this process. Make sure you back it up before you start the OTA. You might also need to restore the TWRP backup you made of the vendor partition, before the OTA will run. Once the OTA, TWRP and Magisk are installed, you can re-run the dm-verity tool.
This version of TWRP works on the Lenovo TB-X505F (wifi).
For the TB-X505X, see this thread. For the TB-X605F/L, see this thread.
For the TB-X606F/L, see this thread. The X606F/L is the second gen M10 and it uses a Mediatek SOC.
Code:
#include <std_disclaimer.h>
/*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Working:
AFAIK, everything is working including:
data decryption
MTP
Known issues:
time not adjusting for Daylight Saving
OTA (for a workaround see this post)
Before installing TWRP
Before you install TWRP, upgrade your tablet to the Android 9 (Pie) or Android 10 (Q) stock ROM.
This tablet shipped with Android 8 (Oreo), in which the bootloader did not allow unlocking. When you tried to unlock the bootloader, it gave this error message:
Code:
fastboot oem unlock-go
FAILED (remote: 'unknown command')
fastboot: error: Command failed
Installation
It is recommended that you also install Magisk. This will ensure TWRP remains your default recovery.
Step-by-step guide
download TWRP to your PC (see the Download section below)
download magisk.apk to your MicroSD or OTG device. Get the latest Magisk apk file here. Rename the filetype from apk to zip (for example Magisk-v22.0.zip)
if your bootloader is already unlocked, go to step 4. To unlock bootloader:
on tablet: go to Settings->System->About and press "Build number" 7 times to enable Developer Options.
on tablet: go to Settings->System->DeveloperOptions. Turn on: "OEM unlocking" and "USB debugging".
connect tablet to your computer. Tablet will ask for permission to "Allow USB debugging". Tick "always allow" and select "OK".
backup any files you want to keep to an external device (MicroSD/OTG/computer), because the next step will wipe all your photos, files, google account etc on the tablet.
Now unlock the bootloader:
Code:
adb reboot bootloader
fastboot oem unlock-go
fastboot reboot
flash the twrp image:
Code:
adb reboot bootloader
fastboot flash recovery twrp.img
if you haven't loaded Magisk yet, go to step 6. If you have already loaded Magisk, you can just reboot and you're finished:
Code:
fastboot reboot
adb reboot recovery
load Magisk (step one): reboot to recovery. Do not reboot into the system, because it will over-write TWRP with stock recovery. If that happens, go back to step 4 and start again. When you issue the reboot command (below), you have to immediately press the button combination to reboot to recovery (TWRP). Here are the steps:
issue the reboot command:
Code:
fastboot reboot
immediately press and hold all three buttons (Pwr+VolUp+VolDown). The tablet might reboot twice. Release all the buttons when you see the TWRP screen, or hear your PC acknowledge that ADB is connected.
load Magisk (step two): flash Magisk. In TWRP:
select "Install"
use "select storage" to locate device you stored magisk.zip on.
press the OK button
select the Magisk zip file
swipe to confirm Flash
when Magisk is finished, hit the "Reboot System" button
finished!
If you prefer to use button combos, rather than fastboot/ADB commands:
Vol Down + Power = fastboot mode
Vol Up + Vol Down + Power = recovery mode
Changelog
Code:
01/03/2023 - bug fix: data partition again backs up and restores correctly
20/01/2023 - add TW_EXTRA_LANGUAGES and TB_X505F_S001149_221115_ROW kernel (credit to @Tonyha7 )
30/12/2022 - add system partition to AdvancedWipe (TB_X505F_S001147_220830_ROW firmware only)
15/11/2022 - TWRP 3.7.0-0 update
- support for TB_X505F_S001147_220830_ROW
18/12/2021 - TWRP 3.6.0-0 update
- support for A12 decryption (keymaster)
27/03/2021 - TWRP 3.5.1-0 update
- change to landscape mode for tablets
01/01/2021 - TWRP 3.5.0-0: initial release
Downloads
TWRP 3.7.0-0 for X505F: twrp-X505F_11.img (for TB_X505F_S001147_220830_ROW and above)
TWRP 3.6.0-0 for X505F: twrp-X505F_11_2021.img (for earlier stock ROMs)
Source code
https://github.com/minimal-manifest-twrp/platform_manifest_twrp_aosp/tree/twrp-11
https://github.com/Yahoo-Mike/recovery_device_lenovo_X505F/tree/android-11.0
Credits
The guys at TeamWin Recovery Project.
Everyone whose device trees I plagiarised from GitHub.
Contributors
Yahoo Mike
Tonyha7
Last Updated 2023-03-01 (fix /data backup/restore)
Created 2021-01-01
reserved
Thanks for useful post,
Possible to reboot into recovery from fastboot?
zubair1836 said:
Thanks for useful post,
Possible to reboot into recovery from fastboot?
Click to expand...
Click to collapse
Not that I know of. The bootloader accepts the command fastboot reboot recovery, but boots to system anyway.
Hello there, I've been looking how to install this on my slow tablet for almost like an hour. Could there be some tutorial or extended explanation to the process and installation, I'm such a noob, sorry.
This worked for me. Thank you for your effort and the TWRP!
Worked for me too - many thanks!
Can't wait for a custom ROM!
TWRP Recovery Installation Steps
1. Download android platform tools
2. Unlock developer mode on the M10
3. Enable USB debugging on the M10
3. OEM unlock enable on the M10
4. XDA download TWRP copy to sd
5. Download Magisk app (from Github!!! johnwu), change extension to .zip
6. Adb to fastboot
7. fastboot flash recovery [filename.img]
8. Turn off device
9. Turn on device holding all 3 buttons, release when see Lenovo splash screen
10. In TWRP find Magisk zip
11. Install Magisk
Stock ROM Recovery
1. Download qualcomm drivers 64 bit install
2. Download Lenovo recovery and image tool windows app from Lenovo support website
3. Fastboot oem edl
4. Turn off M10
5. Start recovery windows app, wait till instructions
6. Hold volume up (up is the side of the button closest to the front camera) and insert cable
7. Release button after windows app detects device
8. Troubleshoot by checking windows device manager for the M10 appears as a Qualcomm device
I'm thinking about getting one of these tablets, but before I do so I'd like to know that the screen lock still works after installing TWRP.
This might sound like a crazy question, but my Samsung Tab A won't set a screen lock - pattern, PIN or password - once TWRP has been installed, and I'd rather not run into the same issue again.
Heeni said:
I'm thinking about getting one of these tablets, but before I do so I'd like to know that the screen lock still works after installing TWRP.
This might sound like a crazy question, but my Samsung Tab A won't set a screen lock - pattern, PIN or password - once TWRP has been installed, and I'd rather not run into the same issue again.
Click to expand...
Click to collapse
Confirmed working normally.
zubair1836 said:
Confirmed working normally.
Click to expand...
Click to collapse
Many thanks.
Thank you! TWRP is working fine!
Stupid me flashed before I installed the Android 10 OTA, so I had to temporarily go back to stock recovery. Unfortunately beamingbadger's method didn't work for me.
This is how it worked for me:
Download the OTA via Lenovo's "Rescue And Smart Assistant"
The stock recovery image will be in the Download folder (default path: C:\ProgramData\LMSA\Download\RomFiles) called "recovery.img"
Flash the recovery.img the same way as you would with the twrp img (adb reboot bootloader -> fastboot flash recovery recovery.img)
fastboot reboot
Install OTA
Flash TWRP recovery + Magisk again (follow the steps from the first post, skip bootloader unlock)
The method I use to install OTAs is:
open Magisk App
select "Uninstall Magisk", then the "Restore Images" option
reboot to Android (you will have no root access and stock recovery is restored)
apply OTA
re-flash twrp and install Magisk
NOTE 1: if you've unencrypted your data partition, it will be re-encrypted by this process.
NOTE 2: the new Magisk App (v22) can be installed in TWRP by renaming the *.apk to *.zip. See the new install instructions.
What's involved with running gsi ROMs on this device? It's got the same SoC as my Samsung Tab, which runs them well, so I'm assuming that this tab will also, but I'd like to know if there are any traps that I need to be aware of.
I can partly answer my own question. It all went more smoothly than I expected: installing TWRP, Magisk and then LineageOS R Mod //LiR, followed by Disable_Dm-Verity_enfec.zip.
If I want to try other GSI ROMs, do I need to flash stock before trying another one? I've had some trouble doing that (won't boot) and it's possibly to do with encryption.
Heeni said:
I can partly answer my own question. It all went more smoothly than I expected: installing TWRP, Magisk and then LineageOS R Mod //LiR, followed by Disable_Dm-Verity_enfec.zip.
Click to expand...
Click to collapse
That's great news. Well done.
Heeni said:
If I want to try other GSI ROMs, do I need to flash stock before trying another one? I've had some trouble doing that (won't boot) and it's possibly to do with encryption.
Click to expand...
Click to collapse
On my X605F I do this in twrp for a new GSI install:
format (not wipe) data partition. This is the option where you have to confirm by swiping.
factory reset. This clears the caches.
restore the stock boot and vendor partitions (from a backup I made). This is because Magisk can touch these partitions.
install the GSI system image
install anything else I need like disable_Dm-Verity, Magisk, gapps etc
I don't know what LOS R Mod //LiR does to your system. If it touches any other partitions, you should restore those to stock too.
Thanks for that. It gives me something to go on with. I've downloaded the stock ROM from lolinet, so I can grab the boot and vendor images from that.
I was able to try a couple of other GSI ROMs and I've settled on AndyYan's LineageOS 17.1 for now. The only serious installation issue I had - which I can laugh about in hindsight - was thinking I'd got myself into a very bad bootloop, when all I needed to do was let go of the power button after the Lenovo logo appeared.
On this tablet, there is no navigation capability at all (no navbar, no gestures, no setting to configure them) on installation, and I have to set it using adb. I suspect it goes back to PHH basic ROMs, but I don't feel like doing yet another install and testing right at this moment. Is this happening on the other tablets that you're testing, or is it unique to this one?
I just posted the v3.5.1 update to twrp.
It's also changed to landscape mode, as many of you requested.
Quick question, how do i apply new system updates with twrp installed? Should i not bother? Also, i forgot how to block check for updates!
will this allow flashing of stock roms download from lenovo recovery? ive been stuck on an ancient android 9 version because the ota updater fails.
Update: March 24 2022: This ROM has been retired and a new one based on LOS 19.1 (and TWRP based on Android 11) have taken its place. New thread here: https://forum.xda-developers.com/t/...4-2020-lineageos-19-1-and-twrp-3-6-1.4421365/
---
Update 9:46am EST July 15 2021: new builds of TWRP and LineageOS with TWRP touch fixed and LOS w/ space for Gapps is now live.
WARNING: USE AT YOUR OWN RISK.
I have successfully ported TWRP and Lineage OS 18.1 to the Samsung Galaxy Tab A7 10.4 (2020), aka SM-T500. This is my first time porting TWRP or LOS, so there may be issues unknown about at this time. Thus far, the only known issue is that the touchscreen in TWRP does not work. This can be worked around by using a USB mouse and/or accessing the device via ADB.
Here are the steps to follow:
Update your device to the latest stock ROM (as of this writing) either using the built-in system updater or via Odin. You want the build that ends with "3BUF3".
Unlock device bootloader using instructions from other threads. This will wipe your device.
Boot into download mode and flash "vbmeta_disabled_R.tar" via Odin in the "Userdata" slot to disable verified boot. This will wipe your device again.
Boot device back into download mode and flash TWRP via Odin in the "AP" slot. If you boot up into the stock ROM rather than booting directly back into download mode then go through the initial setup process of the stock ROM and enable developer tools and ensure OEM Unlocking is still enabled (VaultKeeper can possibly undo OEM Unlocking if you get to the ROM but don't go into Developer Tools and view OEM Unlocking is enabled, so make sure to do this).
Boot device into TWRP (recovery mode) and format (not wipe) your data partition. Then reboot back into TWRP.
Push LineageOS (super.new.ext4.img) to device. Ideally push it to an SD card formatted with ExFat or EXT2/3/4 (FAT/FAT16/FAT32/VFAT won't work due to file-size limitations).
Install LineageOS image to "Super" partition. Make sure to select "Install from Image" in order to show .img files in the install selector screen.
(Optional) Push NikGapps Omni to your device and install the zip. Make sure you include a "nikgapps.config" file in your "/tmp" folder that is configured to install to "system" rather than "product" or "default".
Reboot to system. You should now be in LOS with Gapps.
(Optional, but recommended): Install Magisk via TWRP
(Optional, but recommended): Run fix script to fix brightness slider not working and to make Magisk work. If you didn't install Magisk but only want the brightness fix, just enter "n" when prompted in the script. To run the script:
NOTE: Script has .txt file extension to allow hosting on AFH. Remove that so it's just .sh to match the instructions below.
Download and push to device when booted into TWRP
adb push sm-t500_fixes.sh /tmp
Enter an adb shell
adb shell
Change directories and set permissions
cd /tmp
chmod +x /tmp/sm-t500_fixes.sh
Run script
/tmp/sm-t500_fixes.sh
Tips:
If you are not seeing all of your storage space in the OS on the internal flash, boot to TWRP and format data.
Flash TWRP via "AP" slot and flash VBMeta_Disabler via "Userdata" slot in Odin.
Flash LineageOS as an Image, not as a Zip.
For Gapps, use the latest NikGapps for ARM64 and Android 11/R.
For Gapps, make sure you install to the System partition and not Product. To do this you need to slightly modify a nikgapps.config file. Instructions on that can be found on the NikGapps site.
Downloads:
LineageOS 18.1 20210615 Beta 2: https://www.androidfilehost.com/?fid=14943124697586369438
TWRP 3.5.2 Beta 3: https://www.androidfilehost.com/?fid=14943124697586369439
vbmeta_disabled_R: https://www.androidfilehost.com/?fid=14943124697586369440
Fixes for brightness and Magisk (sm-t500_fixes.sh): https://www.androidfilehost.com/?fid=14943124697586369521
Known Issues:
OS-encrypted storage (Internal Data) not able to be decrypted in TWRP.
Brightness controls don't work: Fixed via "sm-t500_fixes.sh script.
TWRP touch screen doesn't work (use USB keyboard or adb). Should be fixed with TWRP Beta 3.
TWRP formatting external SD card may hardbrick device. Do not do this! Fixed with TWRP Beta 2.
Source (device tree for TWRP from my Github): https://github.com/agreenbhm/android_device_samsung_gta4lwifi
Source (kernel sources from Samsung): https://opensource.samsung.com/uploadSearch?searchValue=Sm-t500#
agreenbhm said:
I have successfully ported TWRP and Lineage OS 18.1 to the Samsung Galaxy Tab A7 10.4 (2020), aka SM-T500. This is my first time porting TWRP or LOS, so there may be issues unknown about at this time. Thus far, the only known issue is that the touchscreen in TWRP does not work. This can be worked around by using a USB mouse and/or accessing the device via ADB.
Here are the rough steps to follow:
Unlock device bootloader using instructions from other threads.
Patch stock ROM (AP) using Magisk, then flash rooted ROM. Will likely need to wipe device after this.
Boot into rooted ROM and ensure "OEM Unlocking" is still enabled in "Developer Tools".
Boot back into download mode and flash "vbmeta_disabled_R.tar" to disable verified boot.
Boot device back into rooted stock ROM to ensure things are still functional (may require a device wipe at this step).
Boot device into download mode and use ODIN to flash TWRP recovery.tar file via "AP" slot.
Boot device into TWRP to verify functionality (hold Vol-Up + Power during boot).
Access TWRP via adb using "adb shell" or with USB mouse (touch functionality currently not working).
Format data partition on device.
Via ADB shell: twrp format data
Via USB mouse: Wipe -> Advanced -> Format Data
Boot device into download mode.
Via ADB shell: twrp reboot download
Via USB mouse: Reboot -> Download
Flash LineageOS tar file via ODIN using the "AP" slot.
If device boots into TWRP after flashing LineageOS, use USB mouse to select: Reboot -> System
Device should boot and stall for ~1m at the Samsung logo screen with red text below, then should go blank and then display LineageOS boot image.
Downloads:
LineageOS 18.1 20210615 with TWRP 3.5.2: https://mega.nz/file/vMVglThZ#TepIHvdEypezq3z4S_4Lln7FRFVfC7CUjVGq3ByFb6U
TWRP 3.5.2: https://mega.nz/file/GYU1yCCQ#JsthI8BYNtfB08Pzt1eeXta2Lb1zCkUI185Zm88dEW4
vbmeta_disabled_R: https://mega.nz/file/iMFx3CQI#8cP4mPoRaQNwDATqt0vKD8wxqRWSTz1EL79U0fNpW8M
Click to expand...
Click to collapse
Great news!! But I think you need to post it in the ROMs, Kernels, Recover thread.
awesome. Will try after work. Also I think you posted in the wrong section.
Which slot to flash the vbmeta?
wizzdome said:
Which slot to flash the vbmeta?
Click to expand...
Click to collapse
AP
Thanks,
After flashing the vbmeta it booted into recovery automatically after what looked like a bootloop in progress, so I wiped with factory reset and then it rebooted fine. (still not sure exactly what the vbmeta does I was hoping it would make it so i didnt get that stupid pop up asking me to hit power button to continue booting due to it having the patched os) anyhow booted fine and twrp installed as you stated without touch screen but mouse with otg works fine. (great job so far) On to LOS... I think I should have checked oem lock before flashing LOS as when I installed I get stuck at boot screen that says oem lock is on... must have been from my factory reset... (facepalm)
Nope... Still sticking on boot with the following showing on the screen...
RPMB fuse not set
RPMB Provisioned
Current BInary: Custom (0x30f)
FRP Lock : OFF
OEM Lock : ON (U) {this was off verified before flash}
KG Status : Checking
Waranty Void : 0x1 (0xE02)
Quallcomm Secureboot : Enable
RP SWREV : B3 (1,1,1,3,1,1) k3 s3
secure download : enable
grdm status : normal (d0000501)
did : 041ce2d22dba
this is displayed in the corner on the bootscreen and looks like it belongs on the download screen, anyhow booting into twrp from this point works however factory reset fails with unable to mount key(something and key(something else) i figure i will let it sit a while as I know sometimes it just takes first boot a while to go through however it doesnt seem to be the problem. Have you had a positive install of the LOS? I am wondering if I had maybe gotten a bad copy of the file. When i go to install I get a pass in odin so not quite sure where to go from here other than back to the factory image any help to get this going would be great... I took on this task cause i needed someting to take my mind off the severely crappy week I have had... so looking forward to anything you can share here...
Actually, userdata is the slot I always use. It might work in both though.
Something to mention: there is not enough space on the /system partition to flash Gapps. I created a build that supports it (with a resized /system partition) but I couldn't get it to flash via Odin. The only way I got it to work was by flashing it via TWRP as an img file. I will be posting that soon. Unfortunately that will be the end of development for now as I hard-bricked the device and need to wait for a repair or replacement. Should be back developing in 2 weeks.
Nevermind what I said here.
jayzarry84 said:
Anyone get this to work? I just flashed the TWRP part but have not been able to get into TWRP
Click to expand...
Click to collapse
Get adb access in the OS and then run "adb reboot recovery"
agreenbhm said:
Get adb access in the OS and then run "adb reboot recovery"
Click to expand...
Click to collapse
question. I don't have an OTG cable and TWRP keeps booting. I've tried rebbot, rebbot bootloader, reboot system. any advice?
jayzarry84 said:
question. I don't have an OTG cable and TWRP keeps booting. I've tried rebbot, rebbot bootloader, reboot system. any advice?
Click to expand...
Click to collapse
You may need to get an otg cable for a USB mouse and choose "reboot system" from the gui. Alternatively, look at the /dev/block/by-name/misc partition and try blanking that out with dd. That has worked sometimes.
jayzarry84 said:
question. I don't have an OTG cable and TWRP keeps booting. I've tried rebbot, rebbot bootloader, reboot system. any advice?
Click to expand...
Click to collapse
Also, from an adb shell, try "twrp reboot". Supposedly that should boot to system, but I feel like in testing I got mixed results. According to the TWRP documentation though that should be the answer.
agreenbhm said:
Also, from an adb shell, try "twrp reboot". Supposedly that should boot to system, but I feel like in testing I got mixed results. According to the TWRP documentation though that should be the answer.
Click to expand...
Click to collapse
Not working. I'll wait for my otg cable to come in
jayzarry84 said:
Not working. I'll wait for my otg cable to come in
Click to expand...
Click to collapse
I was able to use adb to run the TWRP Format Data command and it rebooted the tablet and now LOS has booted up. I think I'm good!
Looking forward to see how this develops
Rom is fast and snappy. Brightness control does not work. I haven’t played too much because of work but that’s what I’ve found so far
Can a mod move this to the rom release section?
agreenbhm said:
Something to mention: there is not enough space on the /system partition to flash Gapps. I created a build that supports it (with a resized /system partition) but I couldn't get it to flash via Odin. The only way I got it to work was by flashing it via TWRP as an img file. I will be posting that soon. Unfortunately that will be the end of development for now as I hard-bricked the device and need to wait for a repair or replacement. Should be back developing in 2 weeks.
Click to expand...
Click to collapse
I've not been able to flash this yet but I know that the latest TWRP versions have a way to fix the system partition to accept gapps. /Wipe/Advanced check system then resize. Sometimes you have to do it more than once if it is a large gapps.
lewmur said:
I've not been able to flash this yet but I know that the latest TWRP versions have a way to fix the system partition to accept gapps. /Wipe/Advanced check system then resize. Sometimes you have to do it more than once if it is a large gapps.
Click to expand...
Click to collapse
I will look into that, but I'm not optimistic it will work. This device does not separately present the system partition, rather it uses a super partition which contains system, vendor, product, and odm. TWRP only shows me the super partition for working with. I was able to resize the system partition by expanding the Lineage image and file system on my pc to match the original stock system partition, then rebuilt the super image with the other partitions it needs.