Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
-----------------------------------------------------------------------------------------------------------------
This project no longer updated because I sold this device. Thanks for following my projects :good:
-----------------------------------------------------------------------------------------------------------------
License
Code:
# Copyright 2016 - Xiaomi Hermes Devs <https://github.com/xiaomi-hermes-devs>
# Copyright 2016 - nofearnohappy <https://github.com/nofearnohappy>
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
Installation and other informations
You can follow this: http://forum.xda-developers.com/redmi-note-2/orig-development/rom-redmi-note-2-t3272872
Click to expand...
Click to collapse
Source codes:
You can found all the source in this repositories:
https://github.com/xiaomi-hermes-devs
https://github.com/nofearnohappy
Click to expand...
Click to collapse
Issue:
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Click to expand...
Click to collapse
Know bugs:
FM Radio not working.
Sim 2 not working (nofearnohappy and me working on it, I need to fix another issue before to try to fix it).
BT sharing doesn't work, and once you attempt to share something via BT, it crashes and you can't enable BT anymore. Can be fixed by rebooting the phone.
Click to expand...
Click to collapse
Important notices:
The most of this work come to nofearnohappy, a russian guy with love for the opensource. Him release the complete source codes and with this I can compile from source the him work. I wanna collaborate with him to fix the other issue, when him want enter into the github collaboration group. Thanks to him for help all people to have a stable version of CyanogenMod!!!
Click to expand...
Click to collapse
Download:
cm_hermes-UNOFFICIAL-20160108-testing.zip
Click to expand...
Click to collapse
XDA:DevDB Information
[ROM][UNOFFICIAL][STABLE] CyanogenMod 12.1 [2016/01/08], ROM for the Redmi Note 2
Contributors
Namaless, nofearnohappy
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: No Longer Updated
Created 2016-01-08
Last Updated 2016-02-01
Reserved
i'm waiting for you
Uploaded, sorry but in italy i have only 50 kb/s into upload so i need some time (after 6 hours for compile the first time lol).
Is this build from source or a port
dangnhap01 said:
Is this build from source or a port
Click to expand...
Click to collapse
Build from source. The full source code for now come from nofearnohappy, a russian guys (i have already writed into OP), after testing to porting a kernel from another devices (same hardware) to our device I continue to working on device source for fix the problem with radio (sim2 i can't try because i don't use the second sim so for me isn't easy do debug), but I create a group into github and fork all sources I used for compile the cyanogenmod so is free for all to use and send pull request for fix problems. I create a thread in general section for give this informations to all redmi note 2 community, im happy if all we try to complete this porting
Im not a really good developer because this is my first time i successfully complete one rom from source but I like to management the people to found the solutions and working fine in squad
Namaless said:
Build from source. The full source code for now come from nofearnohappy, a russian guys (i have already writed into OP), after testing to porting a kernel from another devices (same hardware) to our device I continue to working on device source for fix the problem with radio (sim2 i can't try because i don't use the second sim so for me isn't easy do debug), but I create a group into github and fork all sources I used for compile the cyanogenmod so is free for all to use and send pull request for fix problems. I create a thread in general section for give this informations to all redmi note 2 community, im happy if all we try to complete this porting
Im not a really good developer because this is my first time i successfully complete one rom from source but I like to management the people to found the solutions and working fine in squad
Click to expand...
Click to collapse
Thank you so much for your work, i cant say how much i appreciate it
I will donate your project when i have the chance
Wowwww. Welcome.
I am downloading..... :laugh::laugh::laugh:
nice project bro ! i will test for you welcome
Everything seems to work, except I'm getting the "Internal problem" message during reboots. I think missing a vendor.img?
I got this bro !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
leo0-0 said:
I got this bro !
Click to expand...
Click to collapse
You can try to start without the second sim? I think is this, I never see this message
Cronium said:
Everything seems to work, except I'm getting the "Internal problem" message during reboots. I think missing a vendor.img?
Click to expand...
Click to collapse
I have rebooted now and I not get this message, where you get?
leo0-0 said:
I got this bro !
Click to expand...
Click to collapse
Namaless said:
You can try to start without the second sim? I think is this, I never see this message
Click to expand...
Click to collapse
I got this message too and i don't use dualsim
Grusel said:
I got this message too and i don't use dualsim
Click to expand...
Click to collapse
You reboot after the first initialization? You can get me the logcat? I need more informations about it because if I can reproduce I can't try to fix it
Namaless said:
You can try to start without the second sim? I think is this, I never see this message
I have rebooted now and I not get this message, where you get?
Click to expand...
Click to collapse
Everytime i reboot ! and soming random reboot when i install app !
leo0-0 said:
Everytime i reboot ! and soming random reboot when i install app !
Click to expand...
Click to collapse
Send me the logcat too, because i can't reproduce so i don't know what happen, thanks and sorry for this problem i don't know for now howto fix without some informations
I get the internal error as well, I have had it from the very first bootup. I was testing things so I flashed the ROM and wiped everything numerous times and I got this every single time the phone booted up, regardless of being the first bootup after a wipe and installation or just a regular bootup.
By the way, excellent job, well done!
The previous build by lokjianming couldn't play FLAC files whatsoever. I've registered recently and couldn't make comments but sent him a message about it yet I haven't got a response. I followed the instructions carefully, made sure my FLAC files aren't damaged, made sure I wiped everything (even performed full wipe), but I got "Unknown error 1" all the time regardless of playing from the File Manager or an app. I just flashed your ROM the same way and it plays everything as it should, I am so happy
Noticed the Android security patch is from November, can that be updated?
szakigeri said:
I get the internal error as well, I have had it from the very first bootup. I was testing things so I flashed the ROM and wiped everything numerous times and I got this every single time the phone booted up, regardless of being the first bootup after a wipe and installation or just a regular bootup.
By the way, excellent job, well done!
The previous build by lokjianming couldn't play FLAC files whatsoever. I've registered recently and couldn't make comments but sent him a message about it yet I haven't got a response. I followed the instructions carefully, made sure my FLAC files aren't damaged, made sure I wiped everything (even performed full wipe), but I got "Unknown error 1" all the time regardless of playing from the File Manager or an app. I just flashed your ROM the same way and it plays everything as it should, I am so happy
Noticed the Android security patch is from November, can that be updated?
Click to expand...
Click to collapse
This is a testing for compile cyanogenmod, it's first time for me
My suggestion for a moment is to check this rom now: http://forum.xda-developers.com/red...nt/rom-android-ice-cold-project-10-0-t3288971
Working much better
Namaless said:
This is a testing for compile cyanogenmod, it's first time for me
My suggestion for a moment is to check this rom now: http://forum.xda-developers.com/red...nt/rom-android-ice-cold-project-10-0-t3288971
Working much better
Click to expand...
Click to collapse
Discovered that BT sharing doesn't work, and once you attempt to share something via BT, it crashes and you can't enable BT anymore. Can be fixed by rebooting the phone.
Namaless said:
This is a testing for compile cyanogenmod, it's first time for me
My suggestion for a moment is to check this rom now: http://forum.xda-developers.com/red...nt/rom-android-ice-cold-project-10-0-t3288971
Working much better
Click to expand...
Click to collapse
First of all, congrats bro! Would like to thanks for sharing your first ROM based on CM :good:
Just want to know, why you don't compile and build ROM directly based on CM 13?
Is there not yet available source CM13 for hermes ATM? I have obsolete armani (Redmi 1S) running on Mokee (MK60.1) Android 6.0.1 and it works just fine with custom kernel (God's Kernel) and Xposed Framework (sdk23) with working modules!
Have a great Sunday bro!
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.0 (ICS), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
KNOWN ISSUES
Click to expand...
Click to collapse
http://wiki.teamhacksung.org
INSTRUCTIONS
Click to expand...
Click to collapse
First time installing CyanogenMod 9 to your Galaxy Tab 2, or coming from another ROM:
- Make sure you're running a proper working ClockworkMod-Recovery
- Copy GApps and CM9 ZIPs to your internal SDCard
- Boot into Recovery
- Flash CM9 zip from internal SDCard
- Flash GApps zip from internal SDCard
- DO A DATA WIPE / FACTORY RESET
- Reboot
- Don't restore Apps using Titanium Backup!
Upgrading from earlier version of CyanogenMod 9:
- Copy CM9 ZIP to your internal SDCard
- Boot into Recovery
- Flash CM9 zip from internal SDCard
- Reboot
DOWNLOADS
Click to expand...
Click to collapse
p3100: http://get.cm/?device=p3100
p3110: http://get.cm/?device=p3110
p3113: http://get.cm/?device=p3113
Google Apps:
Get the latest Version from Rom-Manager.
Newer, unsupported versions can be found at http://goo.im/gapps
CHANGELOG
Click to expand...
Click to collapse
http://changelog.bbqdroid.org/#p3100/cm9/next
TEAMHACKSUNG SUPPORT CHAT
Click to expand...
Click to collapse
Webchat: http://webchat.freenode.net/?channels=teamhacksung-support
Server: chat.freenode.net
Channel: #teamhacksung-support
Don't expect any support if you:
- are not running stock cm-kernel
- have installed any mods
- have modified system files
DEAR KANGERS
Click to expand...
Click to collapse
If you're going to reuse our work, which we're doing for free, be fair and give proper credits.
This is the only payment we're really demanding and we deserve it to be mentioned because of the countless hours we've put into this project.
Open-Source doesn't meant Out-of-Respect!!!
SCREENSHOTS
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SUPPORT US
Click to expand...
Click to collapse
If you want to donate a few bucks for the work we're doing in our freetime, goto teamhacksung website and hit the big donate button.
Thanks to all donators!
hello
I would be interested by this rom for my 3100.
I 've yet to find any rom for 3100 because all the other do not take into account the sim card.
but I familiarized aiaucune in programing, I know just to flash the rom, pass by odin etc ....
codeworkx said:
No, there's nothing to download yet.
Just looking for someone who might help testing CM9 to make sure everything is fine. P3100 would be the best to work on.
If you're interested in testing, are having good ADB skillz and knowledge, lemme know here.
Click to expand...
Click to collapse
Good to see you here.
I don't have P3100, but have got P3110.
I am not an accomplished ADB user, but am fully able to follow clearly given instructions. I have used adb on several android devices.
If I can be of any use to test out things, let me know.
Cheers.
I have a 3113 but I'd still be willing to test.
I am good with ADB and the like.
I have a P3113 and adequate ADB skills. I would be willing to test anything you put out.
Sent from my Galaxy Nexus using XDA
P3100 I Have
Hi
I Have GT-P3100 and Good with Adb skills will really wanna test it out... CM9 (cid) is what i dream for
codeworkx said:
No, there's nothing to download yet.
Just looking for someone who might help testing CM9 to make sure everything is fine. P3100 would be the best to work on.
If you're interested in testing, are having good ADB skillz and knowledge, lemme know here.
Click to expand...
Click to collapse
3113 but I'd be happy to test or help in any way. I have some knowledge and stuffs.
K quick question
is this for compiling a full cm9
p-3113 puff, puff, puff, just send'n smoke signal's
codeworkx said:
No, there's nothing to download yet.
Just looking for someone who might help testing CM9 to make sure everything is fine. P3100 would be the best to work on.
If you're interested in testing, are having good ADB skillz and knowledge, lemme know here.
Click to expand...
Click to collapse
31Hey buddy,
Finally someone is working on a custom rom for P3100. I have a P3100 abd would like to test your rom.
Thanx
I have a P3110
I would like to try this, please~
I just have some knowledge about this and have rich experience about testing bcos I made a lot of custom roms for me~
thx~~
Exciting news.
Unfortunately i only have a 3110, otherwise i would have loved to help.
Best of luck with the Rom, I am guessing we have a chance of it becoming an officially supported device now.
Anybody tried this on p3100 ??
Sent from my GT-P3100 using Tapatalk 2
Did not work on P3113, failed to boot past splash logo. Getting adb up now so I can post some information.
Also had to change some of the assert info in Updater Script to be able to even install it (Basically removed most of it and set it so that if the device == espressowifi, go ahead and install).
miketoasty said:
Did not work on P3113, failed to boot past splash logo. Getting adb up now so I can post some information.
Also had to change some of the assert info in Updater Script to be able to even install it (Basically removed most of it and set it so that if the device == espressowifi, go ahead and install).
Click to expand...
Click to collapse
Use the correct Recovery: http://forum.xda-developers.com/showthread.php?p=27812563
Okay have flashed on P3100 as of now working very smooth. Some transition effects lags but its okay. I am already loving it. More updates when i explore all the features. I have the cyanogen mod on the latest ICS v4.0.4. Rocking.
Nice work codeworkx. If any future updates and testing please do write me will be happy to test it for you.
Now time to check if the apps working fine.
I take that hardware acceleration is not implemented yet?
I successfully flashed to my 3113. Awesome and super smooth so far. What would be the best kernel to flash with this?
Sent from my GT-P3113 using XDA
I apologize codexx guess everyone else is working fine. I will re download on a reliable connection later and retry. Glad to see everyone have success!
Sent from my Galaxy Nexus using XDA
zyo said:
I take that hardware acceleration is not implemented yet?
Click to expand...
Click to collapse
This is a completely different build than what xoomdev put out.
Sent from my Galaxy Nexus using XDA
miketoasty said:
This is a completely different build than what xoomdev put out.
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
And Google Chrome works! No more FC due to no hardware acceleration.
Edit: None of the other kernels I've used before seem to work with this. So a proper warning to those who will try. Guess no OC for now.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod 10.1 is a free, community built, aftermarket firmware distribution of Android 4.2.2 (Jellybean), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Generic source code- http://github.com/cyanogenmod
Device Config- https://github.com/nikhil16242/device_Golfu_cm10.1
Kernel Source - https://github.com/nikhil16242/stock-golfu-kenrel
This is still a WIP , so this is not recommended for daily use.
WHAT WORKS
- Audio
- RIL (As far as i have tested
- Camera(Stills and Panorama)
- Storage (Emmc and Sd card)
- Auto Brightness
- Gps
- Proximity sensor
BUGS
These are the major bugs as far as i have tested.
- Wifi
- Bluetooth
- ADB ( Detects the device as offline)
- Video Recording
- Don't use swype function in keyboard.It will fc
Everything else is untested. Might or might not work
INSTRUCTIONS
Read the instructions carefully before posting
-Reboot To Recovery and copy the Rom zip file
-Do a factory reset
-Flash The Rom
-Flash gapps
-Reboot to bootloader and Flash the kernel (boot.img) Provided with the Rom
-Reboot
-After first boot Go into Settings>About Phone and click Build number about 10 times and you will get the developer options.Disable ADB and re enable it and the device will reboot(Its a bug).After the reboot you will be able to access both internal and external sdcard storage (Just a work around for now)
-The only way to provide me logcats for now is through the terminal emulator.Open it and type
Code:
su
logcat > /sdcard/logcat1.txt
Just let it run in the background and provide me logcats if you encounter bugs other than that listed in OP. Please Dont report bugs without logcat.
CREDITS
- Whole Cyanogenmod Development Team
- The XDA team
- @sakindia123 for his work on cm10.1 for htc explorer
- @cute_prince for bringing cm10 to our device and always being helpfull :good:
- @dominos_liberty for showing interest in our device and starting the initial developement
- Anyone I have missed.
Link To Build #1 : http://d-h.st/Eqf
Gapps : http://goo.im/gapps/gapps-jb-20130301-signed.zip
Screen Shots
I start the download
saider said:
I start the download
Click to expand...
Click to collapse
Dont forget to follow the instructions given properly before flashing
nikhil16242 said:
Dont forget to follow the instructions given properly before flashing
Click to expand...
Click to collapse
of course
Hey nik, i managed to boot the rom with CM10 kernel, is there any difference? And if so, would you mind me using your source code to OC the kernel for cm 10.1?
me4488 said:
Hey nik, i managed to boot the rom with CM10 kernel, is there any difference? And if so, would you mind me using your source code to OC the kernel for cm 10.1?
Click to expand...
Click to collapse
If you boot it with cm10 kernel ril wont work. I will upload the kernel sources by today.
nikhil16242 said:
If you boot it with cm10 kernel ril wont work. I will upload the kernel sources by today.
Click to expand...
Click to collapse
i don't understand it really well so i followed your instructons rom boots and i go to settings and click build number 10 times then i go to developer options and adb is already disabled when enabling no reboot?
EDIT: had to do it a few times now it rebooted and external storage working (i tried using apollo and it's very unstable)
EDIT2: we really need OC now we see 4.2.2 doesn't run that well on out device
noahvt said:
i don't understand it really well so i followed your instructons rom boots and i go to settings and click build number 10 times then i go to developer options and adb is already disabled when enabling no reboot?
EDIT: had to do it a few times now it rebooted and external storage working (i tried using apollo and it's very unstable)
EDIT2: we really need OC now we see 4.2.2 doesn't run that well on out device
Click to expand...
Click to collapse
Enable it , then disable it again. You will have a reboot.
nikhil16242 said:
Enable it , then disable it again. You will have a reboot.
Click to expand...
Click to collapse
it rebooted
EDIT: what is RIL exactly? is it important?
error install apps
this is a great rom but one thing i miss adb we really need a fix for that!
noahvt said:
this is a great rom but one thing i miss adb we really need a fix for that!
Click to expand...
Click to collapse
you have installed the application?
saider said:
error install apps
Click to expand...
Click to collapse
Yes I know.This is a WIP (its just my 2nd build) . Its not meant for daily use for now.
noahvt said:
this is a great rom but one thing i miss adb we really need a fix for that!
Click to expand...
Click to collapse
I will try to fix most of these bugs in future releases.
saider said:
you have installed the application?
Click to expand...
Click to collapse
nah when installing an app it says: app not installed!
nikhil16242 said:
Yes I know.This is a WIP (its just my 2nd build) . Its not meant for daily use for now.
I will try to fix most of these bugs in future releases.
Click to expand...
Click to collapse
When you are able to fix the installation of applications?
saider said:
When you are able to fix the installation of applications?
Click to expand...
Click to collapse
Yesterday you had no cm10.1 , just a thread full of bickering .
Today you have cm10.1 .
Be happy it's getting built and stop asking for finish times.
If I know nik he is working hard on this and it will get fixed asap
So glad to see you on this nik :good:
whoamigriffiths said:
Yesterday you had no cm10.1 , just a thread full of bickering .
Today you have cm10.1 .
Be happy it's getting built and stop asking for finish times.
If I know nik he is working hard on this and it will get fixed asap
So glad to see you on this nik :good:
Click to expand...
Click to collapse
okay
Try using the wifi fix for CM 10 and then compiling the kernel.
noahvt said:
EDIT2: we really need OC now we see 4.2.2 doesn't run that well on out device
Click to expand...
Click to collapse
Hehe 4.2.2 is a big old beast . We are deffo gonna need a big ass oc ;p
I think if you havn't used 4.2.2 before you are going to end up a little deflated once you get it . It's not the all singing and dancing update that cm10 was to our phone.
And I wouldn't be suprised in the least that it will be slower.
Oh and nik and other devs . not sure on cwm but deffo on twrp , i think 2.4+ was needed as it fixed a bug where backups were spawning everywhere. It was to do with the way google made JB to accommodate multiple profiles . It's deffinately something to be aware of as when it was launched there were all sorts of problems on the forums because of multiple spawning of backups
I don't actually do this romming thing, I just compile the ROMs. All credit to JustArchi, Moster2, arter97, etc.
Read the WHOLE OP.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Working
- updater-script (flashing)
- kernel (booting)
- OpenGL (CPU rendering)
- MALI blobs (GPU rendering)
- HWComposer and MALI R4P0 drivers
- Rotation
- Camera (this DOES NOT include stock camera app, use e.g. google camera)
- WiFi
- Bluetooth
- NFC (Android Beam)
- Sensors (ALL!)
- Internal / External SD Card
- Vibration
- GPS
- RIL (including mobile data)
Not Working
- Nothing?!?
This is NOT A STABLE BUILD.
If you suffer bootloops, or any other bugs, I do not care, unless you can provide a logcat.
If you have an issue that has already been solved or reported, do not expect a response. I'm 99% sure that your issue is known and is being worked on by the devs.
You do not need to flash this over any other ROM. Wipe dalvik cache, data and system before flashing. Allow some time for ART to finish booting.
If it doesn't work for you, and you aren't willing to put the effort in to either get a logcat or perhaps do a little bit of research by yourself, go back to 4.4. You clearly should not be running pre-alpha builds.
I use the ParanoidAndroid Beta gapps, they work fine.
And the downloads? (Changelog is in the next post down)
2014-12-11 (md5sum: 4c96155f2c46c2b3d716fa9e833165fc)
2014-12-10 (md5sum: e8fda36be5e1aaa5b58161363ebafaf5)
Screenshot:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
build date and cm version seem to be off. I don't know why, but the kernel version is right
If you like this, support JustArchi, Moster2 and arter97. They do all the code, I just build the builds.
I use TWRP, although any recovery should work fine. As long as your recovery is recent (i.e the latest version), it will not make a difference to how successful your installation is.
Installing in 4 simple steps!
Wipe dalvik cache, cache, data and system
Flash the ROM
Flash gapps
Doesn't work? Try skipping step 3. Still doesn't work? Logs or it didn't happen.
Fixing your problem in 4 simple steps!
Use the search function. Think of it as Google, but for this thread. Also search Archi's thread
Read the last 10-15 pages of both this thread, and Archi's
Still haven't found someone who has reported your issue or haven't found a fix? logcatlogcatlogcatlogcat. Post it here in an attachment. Explain how you produced the issue, specifically. "I pressed the button and then the thingy stopped working" is not enough.
"Wow it's been a whole two days and you haven't posted a new build?!?"
I have a life. I generally prefer my actual life over reading XDA. I do go places without an internet connection. I do not always have a computer capable of building Android. I do sleep. I do go out during the day. I do live in a timezone that is not in the USA. Therefore, I may disappear off the internet for hours, even days at a time. You can always build your own builds if you want!
These builds come straight from @JustArchi's repos. To duplicate my build, use the CM 12 manifest and put Archi's roomservice.xml in your local_manifest folder. I recommend getting a CM11 build working before attempting to build this.
XDA:DevDB Information
CyanogenMod 12 semi-nightly, ROM for the Samsung Galaxy S III I9300
Contributors
forkbomb444, JustArchi, Moster2, arter97
ROM OS Version: 5.0.x Lollipop
Version Information
Status: Alpha
Created 2014-12-10
Last Updated 2014-12-11
Changelog
Remember that none of these changes are written by me!
Build 2
- A couple of new semcosh MAC addresses added to macloader
- All CyanogenMod changes up to 2014-12-11 05:30AM (GMT+0)
Build 1
- First build
is every thing working...mobile data, wifi, home button wake..?
Thanks for updated cm12 rom for s3.
vwong said:
is every thing working...mobile data, wifi, home button wake..?
Click to expand...
Click to collapse
forkbomb444 said:
Read the WHOLE OP.
Click to expand...
Click to collapse
problem with long sms
Hey,
First, thank you for sharing and your work!
I have only one question: does long sms works? I have issiu with Archi's Lolipop - If message is not too long (1 sms) everything is fine, but if im writing long message like 2-4 sms, message is not send, i can't call anyone till phone reboot and also i cannot retrive SMSC number. After reboot everything is ok.
Any fix or tip?
@forkbomb444
Signal bar bug fixed in this build?
tokict said:
@forkbomb444
Signal bar bug fixed in this build?
Click to expand...
Click to collapse
Nope.
trickster00 said:
Hey,
First, thank you for sharing and your work!
I have only one question: does long sms works? I have issiu with Archi's Lolipop - If message is not too long (1 sms) everything is fine, but if im writing long message like 2-4 sms, message is not send, i can't call anyone till phone reboot and also i cannot retrive SMSC number. After reboot everything is ok.
Any fix or tip?
Click to expand...
Click to collapse
I have no idea. Get a logcat of what happens when you send a long SMS.
thanks, will give it a go.
Is the initial keyboard start-up issue fixed in this build? (or alternatively, is there a way to run the first time boot script after I enable the keyboard, instead of having to set up everything manually?
forkbomb444 said:
Nope.
I have no idea. Get a logcat of what happens when you send a long SMS.
Click to expand...
Click to collapse
can you test sending long sms?
Will Test It Soon Thank You Dev :thumbup:
Sent from my XT1022
gtsfreak said:
Will Test It Soon Thank You Dev :thumbup:
Sent from my XT1022
Click to expand...
Click to collapse
He is not a dev. He even mentions it in OP.
I don't get it.
What's the difference between this and JustArchi's? Sure this is a newer build but nothing else has changed?
I am not getting the point of making a rom by cloning Archie's branch. Is their any value additions?This is the main reason why Dhiru sometimes keeping his work closed. I am not demoralizing OP. Some difference/value additions will make our day.. Cheers
Could you add trim support to kernel?
other then that- rom works great. Hiccups i got on Archis rom are gone here. for now that is.
Difference is home button wake works(?)
Sent from my GT-I9300 using XDA Free mobile app
shaheen7m said:
I am not getting the point of making a rom by cloning Archie's branch. Is their any value additions?This is the main reason why Dhiru sometimes keeping his work closed. I am not demoralizing OP. Some difference/value additions will make our day.. Cheers
Click to expand...
Click to collapse
dreamaddict said:
Difference is home button wake works(?)
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
and lollipop version also upgraded to 5.0.1
dreamaddict said:
Difference is home button wake works(?)
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
vwong said:
and lollipop version also upgraded to 5.0.1
Click to expand...
Click to collapse
Yeah, but still, nothing has changed from JustArchi's sources, which also has this features. The only thing is that this is compiled and released earlier than JustArchi's.
If that's the main point, to release a ROM based on JustArchis's sources before him, it's just so rude.
do I have to flash anything else exept rom, like gapps, 3g fix, camera fix ?
Did anyone tested the rom????????
Sent from my GT-I9300
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is NamelessROM ?
Simple - NamelessROM is opportunity.
An opportunity to have a voice to the development team of the after-market firmware that you run on your device.
The main goal of NamelessROM is to provide quality development for android devices, phones and tablets alike.
NamelessROM developers are available nearly 24/7 and respond to bug reports and feature requests almost instantly.
This availability will allow you, the end-user, to have direct input into exactly what features and functions are included on the firmware that YOU run.
NamelessROM maintains features and functions of several well-known open-source, AOSP-based ROMs, as well as many features of our own.
Visit our website for more detailed information.
NamelessROM = endless possibilities. Unless you have an iPhone, then you're out of luck.
Click to expand...
Click to collapse
What is Nameless Rom?
NamelessROM Gerrit Review
Hey guys!!
This is the Nameless rom for n7000 built by me.
Feel free to coment and report bugs and hit that thanks button if you like my work.
Thanks to Nameless for their hard work and thanks to Bauner for his build tree.
Hope you enjoy!! Cheers!!
DISCLAIMER
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
IMPORTANT INFORMATIONS
Click to expand...
Click to collapse
IMPORTANT INFORMATIONS
-To enable developer options, go to setting>About Phone and tap the build number 7 times.
- Device is not rooted.Flash provided superSU package to get root access.
- If the keyboard doesn't work please go to settings- Language and input- current keyboard and enable hardware option
DOWNLOAD LINKS
Rom: 31/07/2015
Gapps: PAgapps
Root: SuperSU
Whats New
- Updated Sources
- build.prop tweaks
Older Downloads
5.1.1
01/06/2015
10/05/2015
5.1
20/04/2015
Installation Instructions
Download zip to your sdcard
Make sure you're using a Kitkat Compatible Recovery
Boot into Recovery
Wipe all your data
Flash zip from sdcard
(Optional)Flash Google Apps.zip from sdcard
Reboot
XDA:DevDB Information
Nameless Rom for n7000, ROM for the Samsung Galaxy Note GT-N7000
Contributors
sai24
Sources: https://github.com/sainath24
ROM OS Version: 5.1.x Lollipop
ROM Firmware Required: Kitkat compatible recovery
Based On: CM
Version Information
Status: Beta
Current Beta Version: #5
Beta Release Date: 2015-07-31
Created 2015-04-19
Last Updated 2015-07-31
Review??
Review of the rom plz? Anyone?
SIr, I don't think that you can expect reviews so soon. Rom was published only 2 hrs before your post. Maybe you should try to install it and write your own review? I'm installing it right now and I'll report back after I finish all testing.
Ok, install finished, here are the results:
01 - First boot takes waaaay too long, but it booted eventually
02 - Mobile network not available, I can not make calls or send sms, "Error while searching for networks"
03 - WiFi is not working, unable to turn it on, also faced reboot while trying to turn it on.
05 - Battery temp is around 49C after install
06 - Just faced another random reboot while checking previous.
Hope you'll fix this soon. Back to the NightOwl for now
Thanks, anyway
Your website is down mate. Hope you can list some of the features.
super_operater said:
SIr, I don't think that you can expect reviews so soon. Rom was published only 2 hrs before your post. Maybe you should try to install it and write your own review? I'm installing it right now and I'll report back after I finish all testing.
Ok, install finished, here are the results:
01 - First boot takes waaaay too long, but it booted eventually
02 - Mobile network not available, I can not make calls or send sms, "Error while searching for networks"
03 - WiFi is not working, unable to turn it on, also faced reboot while trying to turn it on.
05 - Battery temp is around 49C after install
06 - Just faced another random reboot while checking previous.
Hope you'll fix this soon. Back to the NightOwl for now
Thanks, anyway
Click to expand...
Click to collapse
So many issues??!! Does anybody face the same thing too? Anyway, I'll try to make it better. Thanks for trying it.
Also, I'm unable to flash NightOwl now, I'm getting error in recovery. It says: This file is for N7000 and this device is GT-I9100 Guess I'll have to try using odin and start from scratch...
edit: succesfully returned to NightOwl by using JB kernel first and then @bauner's L kernel and rom afterwards. Maybe you provided us wrong recovery inside rom zip?
sai24 said:
So many issues??!! Does anybody face the same thing too? Anyway, I'll try to make it better. Thanks for trying it.
Click to expand...
Click to collapse
Same issues here: no mobile network, no wifi and several reboots.
Back to RR.
super_operater said:
Also, I'm unable to flash NightOwl now, I'm getting error in recovery. It says: This file is for N7000 and this device is GT-I9100 Guess I'll have to try using odin and start from scratch...
Click to expand...
Click to collapse
I could go back to RR using a nandroid backup
Hi @sai24,
Welcome to N7000 forums... So glad to see you've joined us, and are contributing to N7000 roms too... I've seen, and admired your work over on the S2 / i9100 forums... As tested your roms for that device, and I soon plan to try / test this rom too....
Keep up the good work, its a welcomed sight to see you on these forums too...
Lister
sai24 said:
So many issues??!! Does anybody face the same thing too? Anyway, I'll try to make it better. Thanks for trying it.
Click to expand...
Click to collapse
Lister Of Smeg said:
Hi @sai24,
Welcome to N7000 forums... So glad to see you've joined us, and are contributing to N7000 roms too... I've seen, and admired your work over on the S2 / i9100 forums... As tested your roms for that device, and I soon plan to try / test this rom too....
Keep up the good work, its a welcomed sight to see you on these forums too...
Lister
Click to expand...
Click to collapse
Good news to see another intelligent dev!!!!!!
Keep up the good work!
New Update
Hey guys, Beta 2 is up. I think this will fix all the issues caused by the first build. Please do try this too. Thanks a lot.
sai24 said:
Hey guys, Beta 2 is up. I think this will fix all the issues caused by the first build. Please do try this too. Thanks a lot.
Click to expand...
Click to collapse
Great News that our device got another Lollipop Rom.
Will flash and taste the dish soonest possible.
Hope upcoming future build would be more awesome with lots of features and tweaks.
Regards
Please provide some feature description and screenshots.
Thanks & Cheers.
Flashed and problems of last beta hve been solved.
Wifi and mobile network working. No initial reboots.
Keybord must be activated to use to configure wifi or google account.
Testing now.
Waiting to know about video playback and 1080P recording and screenshot thanks for the rom
anyone tell me the rom issues ?
and its fast nightowl ?
ajhier1 said:
anyone tell me the rom issues ?
and its fast nightowl ?
Click to expand...
Click to collapse
Hi mate,
This rom is on eta stage. So you must accept some bugs and issues. If you find any thing post it here. Developer working on this. hope near feature we can taste an awesome Lollipop Rom on our device.
Thanks.
urviagarwal said:
Please provide some feature description and screenshots.
Thanks & Cheers.
Click to expand...
Click to collapse
+1
It would be nice to write some more info about rom and a few screenshots, also. It can be useful for other members...
thanks.. this a good rom for my Note
nandunk said:
thanks.. this a good rom for my Note
Click to expand...
Click to collapse
network is working ?
sanioclement said:
network is working ?
Click to expand...
Click to collapse
Yes, network is working..
i am sorry, i bad in english
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
We need testers! Join to our Discord server!
Join the J110H Android Development Discord Server!
Check out the J110H Android Development community on Discord - hang out with 3 other members and enjoy free voice and text chat.
discord.gg
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Installation:
- Reboot to TWRP (if you don't have it yet, view my threads!)
- Wipe data,system,cache,dalvik
- Install the ROM
- Reboot!
What does work:
- Audio
- Flashlight
- ADB
- Sensors
- RIL
- Camera (use OpenCamera)
- ART + Dalvik support
What does partially work:
- GPS
What doesn't work:
- WiFi
- Bluetooth
- RIL
- File Manager can't detect external/internal storage
- MTP
- FM Radio (removed from ROM)
Won't fix:
- WiFi
- Bluetooth
- RIL
Download: https://androidfilehost.com/?fid=14655340768118447620
Kernel source: https://opensource.samsung.com/uploadSearch?searchValue=J1
Credits:
@TriDiscord , @mozzafar alali , @Pixi_Vision , @SoumyajitGiri for testing my roms
@TriDiscord (& me) again for his work
me for the idea to resurrect this device
CyanogenMod
OmniROM
XDA: DevDB Information
CyanogenMod 11, ROM for Samsung Galaxy J1 Ace DUOS
Contributors
ROM OS Version: 4.4.4 Kitkat
ROM Kernel: Linux 3.10x
Version Information
Status: Unstable
Created: 04-04-2022
Last Updated: 04-04-2022
Great job.
notnoelchannel said:
Installation:
- Reboot to TWRP (if you don't have it yet, view my threads!)
- Wipe data,system,cache,dalvik
- Install the ROM
- Reboot!
Click to expand...
Click to collapse
I believe I have successfully flashed the ROM with TWRP after wiping ^ but my j1 ace is
puking same red exclamatory mark on left corner and getting struck on boot logo
calling it a day now, will tinker tomorrow.
this warning might be stock sambung bootloader teasing (-_-
btw /data partition seems to be empty after flashing, ideal? dmesg and recovery logs from twrp
displ .nl/xd/samtwrp_dmesg.log.txt
displ .nl/xd/samtwrp_recovery.log.txt
Hisacro said:
I believe I have successfully flashed the ROM with TWRP after wiping ^ but my j1 ace is
puking same red exclamatory mark on left corner and getting struck on boot logo
calling it a day now, will tinker tomorrow.
Click to expand...
Click to collapse
flash this boot.img on twrp and reboot
notnoelchannel said:
flash this boot.img on twrp and reboot
Click to expand...
Click to collapse
success! I was able to boot this rom but the prompt
> Unfortunately, phone has stopped (button - ok)
keeps on popping, I played fast console tapping game to move past initial setup but this
prompt persists even after reboot
in a way it's a step forward (?)
-x-x-
can confirm working
- audio (used alarm)
- flashlight
- ADB
- Sensor (auto orientation)
btw mind knowing where did cmboot.img come from? is it dedicated bootloader for cynanogenmod?
Hisacro said:
success! I was able to boot this rom but the prompt
> Unfortunately, phone has stopped (button - ok)
keeps on popping, I played fast console tapping game to move past initial setup but this
prompt persists even after reboot
in a way it's a step forward (?)
-x-x-
can confirm working
- audio (used alarm)
- flashlight
- ADB
- Sensor (auto orientation)
btw mind knowing where did cmboot.img come from? is it dedicated bootloader for cynanogenmod?
Click to expand...
Click to collapse
Normally it should not be named CMBOOT under any circumstances, but it was named CMBOOT beacuse well... "CyanogenMod Boot (Image)"
It would normally be named something like boot_cyanogenmod.img but oh well
TriDiscord said:
Normally it should not be named CMBOOT under any circumstances, but it was named CMBOOT beacuse well... "CyanogenMod Boot (Image)"
Click to expand...
Click to collapse
does `CMBOOT` mean something else? web searches of it doesn't bring up anything related to bandroid
TriDiscord said:
It would normally be named something like boot_cyanogenmod.img but oh well
Click to expand...
Click to collapse
pardon my ignorance, does /boot partition needs to flashed with custom bootloader for custom roms to be seen or just the case for this sambung?
from my glances of cyberspace (mis?)info, doesn't unlocking stock bootloader enough to recognize?
Hisacro said:
does `CMBOOT` mean something else? web searches of it doesn't bring up anything related to bandroid
pardon my ignorance, does /boot partition needs to flashed with custom bootloader for custom roms to be seen or just the case for this sambung?
from my glances of cyberspace (mis?)info, doesn't unlocking stock bootloader enough to recognize?
Click to expand...
Click to collapse
cmboot is the stock kernel i just named it cmboot because..why not?
notnoelchannel said:
cmboot is the stock kernel i just named it cmboot because..why not?
Click to expand...
Click to collapse
o_0 haha
Hisacro said:
> Unfortunately, phone has stopped (button - ok)
keeps on popping, I played fast console tapping game to move past initial setup but this
prompt persists even after reboot
Click to expand...
Click to collapse
bump ^
Hisacro said:
o_0 haha
bump ^
Click to expand...
Click to collapse
Remove Phone.apk and telephony stuff..that worked for me
thought Phone as literal phone
notnoelchannel said:
Remove Phone.apk and telephony stuff..that worked for me
Click to expand...
Click to collapse
affirmative. Phone, bluetooth & simtoolkit
Hello, @notnoelchannel Remember me I have successfully installed your rom no popups like system stopped but wifi is not working the main thing is not working GPS not working, and Bluetooth, ril already mention they won't be fixed but WiFi must be fixed pls
SoumyajitGiri said:
Hello, @notnoelchannel Remember me I have successfully installed your rom no popups like system stopped but wifi is not working the main thing is not working GPS not working, and Bluetooth, ril already mention they won't be fixed but WiFi must be fixed pls
Click to expand...
Click to collapse
Those won't be fixed until sources are provided by original authors of the ROMs
this rom is awesome, absolutely no drain of battery! (been at 96% since last week haha)
Hisacro said:
this rom is awesome, absolutely no drain of battery! (been at 96% since last week haha)
Click to expand...
Click to collapse
No drain of battery because RIL is not working...
TriDiscord said:
No drain of battery because RIL is not working...
Click to expand...
Click to collapse
suee suee don't spill it
TriDiscord said:
Those won't be fixed until sources are provided by original authors of the ROMs
Click to expand...
Click to collapse
original authors?
came across these past works (anything related?)
android_device_samsung_j1pop3g/ril/SamsungSPRDRIL.java at cm-12.1-test · ahmedgamal17/android_device_samsung_j1pop3g
Contribute to ahmedgamal17/android_device_samsung_j1pop3g development by creating an account on GitHub.
github.com
Hisacro said:
original authors?
came across these past works (anything related?)
https://github.com/ahmedgamal17/and.../blob/cm-12.1-test/ril/SamsungSPRDRIL.java[/U
Click to expand...
Click to collapse
the ROM has been ported from J100H and the device tree you linked is invalid so it won't help us
SoumyajitGiri said:
Hello, @notnoelchannel Remember me I have successfully installed your rom no popups like system stopped but wifi is not working the main thing is not working GPS not working, and Bluetooth, ril already mention they won't be fixed but WiFi must be fixed pls
Click to expand...
Click to collapse
hey! why did you ignore me if I can ask?
RIL n bluetooth might be fixed but ... I can't fix WiFi due to different drivers.
These are the solutions for WiFi:
a) you make a custom kernel also a custom wifi driver from scratch
b) you compile from source with j13g's device tree
c) use stock sprdwl.ko (Won't work)
Tri's solution:
a) read that it won't be fixed
b) make logcats if you want the not working thing fixed
c) or don't download the rom........