Database Develop

[Q] Can't update to Lollipop in XT1068

I don't know if this same thread is created ...searched it but did't find it ...
Soo I've Rooted My Moto G 2014 Indian Version after unlocking bootloader...also installed TWRP 2.7...few days back I got the official Lollipop OTA update..but after downloading when I click on install now it reboots in TWRP recovery mode & gives error..can anyone give me solutions please....

use the official recovery it will work... but if you change any system apps i recommend you to flash back the original firmware then install the update.. TWRP will not work with the official OTA release.. hope this help.

Hauzel said:
use the official recovery it will work... but if you change any system apps i recommend you to flash back the original firmware then install the update.. TWRP will not work with the official OTA release.. hope this help.
Click to expand...
Click to collapse
I haven't changed any system apps...just unlocked bootloader, rooted & installed xposed framework and some modules such as Gravitybox & Blurred System....can you please give me official link to download official stock recovery & also please let me know that I can flash official stock recovery on my Rooted Moto G 2014

Flash stock rom.

★ [ROM][STOCK] Android One 1st Gen [SPROUT] ★

Android One Universal STOCK ROMs [M/LP/KK]​
These ROMs are 100% Stock without any modification. Latest versions were backed up by the command "dd". LP versions were Identical from the official captured OTA LMY47O merge with the Official OTA. These roms are put together for rooted users who wants to fall back to google stock rom, And also for users who are having issues while installing the latest OTA. Nothing is removed from the original rom, and all signatures are intact. SPROUT8 LMY47V was based with the CM One fastboot images by @intersectRaven and captured Nexian Journey OTA LMY47V by Aandre Hartmen. KitKat Rom was based with the Official KPX44 MMX A1 Flashfile by moulnisky. Lastly, please take the time to read the instructions, FAQ, carefully and thoroughly before proceeding....
SPROUT4 [ M 6.x ] drive | Mirror [ LP 5.1.1 ] drive | d-h.st [ KK 4.4.4 ] drive | d-h.st
- Default Stock ROM for the following Android One devices
Micromax Canvas A1 AQ4501 (India)
Karbonn Sparkle V (India)
Spice Dream UNO (India)
MyPhone Uno (Philippines)
Symphony Roar A50 (Bangladesh)
- FEATURES
Move To SD [LP/KK]
Hidden Internal Storage (Apps only) [LP/KK]
If you are rooted, you may access your internal storage by navigating to "/data/media/0" [LP/KK]
SPROUT8 [ M 6.x ] drive | Mirror [ LP 5.1.1 ] drive | d-h.st [ KK 4.4.4 ] drive | d-h.st
- Default Stock ROM for the following Android One devices
Cherry Mobile One (Philippines)
Nexian Journey One (Indonesia)
Mito Impact (Indonesia)
Evercross One X (Indonesia)
Micromax Canvas A1 AQ4502 (India)
QMobile A1 (Pakistan)
- FEATURES
Internal Storage and SDcard are both accessible [LP Only]
No move to SD feature out of the box [LP Only]
move to SD feature is only available on Kitkat, Internal storage is not accessible [KK Only]
FLASHING PROCEDURE :
Download the ROM
Move the file to sdcard
Reboot to Custom Recovery
Install via Philz recovery if you want to fall back to stock recovery
Install via TWRP to stop the restoration of stock recovery
(ensure that "MOUNT SYSTEM PARTITION READ-ONLY" is uncheck)
Backup your current ROM (just in case)
No need to Wipe DATA (Read FAQ for more details)
Locate the file and install
Reboot... It will take about 10-15 minutes so be patient
Frequently Asked Questions :
1. Are they both compatible with my device?
Yes, as long as you are using an Android One first generation..
No need to unlock or re-lock bootloader
Install via custom recovery only
2. Will I still be able to recieve the official OTA updates in the near future?
Yes, as long as you have installed the default Stock ROM version for your device.
If you had installed Sprout4 over an Sprout8 device, the official OTA will fail due to mismatched signatures.
As long as you've never rooted and flash a custom recovery.
In case you have rooted your device, all you need to do is reflash the ROM when a new ota arrives and you'll be fine
3. Do I need to Wipe my Data and cache partitions before flashing the ROM?
Installing a sprout4 stock rom over an sprout4, no need to wipe anything.
Otherwise, if you flashed sprout4 over an sprout8 rom, you have to do a clean install.
Sprout4 to Sprout4 = No need to wipe data,cache partition
Sprout8 to Sprout8 = No need to wipe data,cache partition
Sprout4 to Sprout8 = Need to do a clean install, wipe data,cache,system
Sprout8 to Sprout4 = Need to do a clean install, wipe data,cache,system
If you are having apps FCs, try clearing the app data of the affected app, or try hard reset.
If all else fail, do a clean install.
4. How to install Stock ROM over a Custom ROM?
Backup your current ROM (just in case)
Its a Stock ROM, no need to downgrade or unroot your device
Install it like how you install your preferred Custom ROM for the first time
Do a clean install by wiping data, dalvik, cache and system
5. Got stuck with "Patching system image unconditionally"?
It might be a bad download
Always verify the hash prior to installation (check the howto verify the MD5sum below)
Wipe the system partition just in case
6. Why was my Custom Recovery perished?
If you flash the Stock ROMS using Philz Recovery 6.57.9. Your device will reverted back to Pure Stock including the Stock Recovery.
How to avoid this? If you have access to Aroma Filemanager using Philz, rename /system/bin/install-recovery.sh and /recovery-from-boot.p or flash superSU before rebooting your device.
Or simply use TWRP, prior to flashing the Stock ROM.
Just go back to Philz soon after the boot process was over if you wish to.
I prefer not to rename install-recovery.sh by default to give users an option to go back to stock recovery without providing a separate image of it.
7. For users who are having Irregular data connection and phone shows 'Emergency Calls Only'.
Go to Settings>More>Cellular networks>Access Point Name> then select the correct apn for your carrier.
If the problem still exists, go to Settings>More>Cellular network>Network Operator> then select the correct carrier.
WARNING!!!! PLEASE READ...
By installing the rom via philz recovery, android will automatically restore the stock recovery... Its a good thing for users who wants to go back to pure google stock rom.
WORKAROUND: If you wish to keep a Custom Recovery, and have access to Aroma Filemanager via Philz recovery, just rename /system/bin/install-recovery.sh and /recovery-from-boot.p, or simply flash superSU before rebooting your device.
I prefer not to rename install-recovery.sh by default to give users an option to go back to stock recovery without providing a separate image of it.
The simplest method to retain a custom recovery is to use TWRP prior to installation
Then flash Philz soon after the boot process was over if you wish to.
So basically.....
If you wish to be on Pure Stock with Stock Recovery... install it with Philz (CWM).
If you wish to be on Pure Stock and keep a Custom Recovery... install it with TWRP.
Recommended Recoveries
TWRP (SPROUT ALL) with Logo and OEM backup partition support
TWRP Materialize (SPROUT ALL)
TWRP Official (SPROUT4 ONLY)
Philz Recovery (Sprout ALL) flash this if you wish to go back to Philz Recovery
Stock Recovery (Sprout)
How to Root my device?
Just flash SuperSU with a custom recovery..
Or follow varuns rooting guide​
MD5 Sum
[SPROUT4 MRA58M] c75b28612f0a77ac5fc27084da4b6558
[SPROUT8 MRA58M] 7e34ce53e6bee8bb8adf635a05e2db7a
[SPROUT4 LMY48K] c0bd0113a84fdd03a0c7f3d245d71b67
[SPROUT8 LMY48K] 705b56acb2159b0fa9f05a86e7818db4
[SPROUT4 LMY47V] 9f62914a94e9b0ec5abd445120bd3b7c
[SPROUT8 LMY47V] 0063e621f6ffed6d0fe142de7e502d4d
[KITKAT KPX44] 377ea840259be29aa3383ab1757a6ede
How to Verify the MD5 signature?
If you are running Windows just download HashTabs and install. Right click on the downloaded file then click properties and look for "FILE HASHES" tab, verify if md5 hash are the same. On unix based system just execute this line in the terminal "md5sum SPROUT4-STOCK-ROM-LMY47V.zip". On your phone, just use ES explorer and then click properties then tap "Show Checksum" then compare the md5 hash. If the file hashes are identical you are good to go, Otherwise, redownload the file again due to bad probably.​
Universal OTA
Intended for users who have limited bandwidth. Otherwise, use the stock roms.
Flash via custom recovery only
OTA MRA58N from MRA58M (M 6.0) UNIVERSAL
OTA MRA58N for SPROUT4 and SPROUT8 MRA58M users only
​
Credits to the one who captured the OTA links...
Click to expand...
Click to collapse
OTA LMY48M from LMY48K (LP 5.1.1) UNIVERSAL
OTA LMY48M for SPROUT4 and SPROUT8 LMY48K users only(7+ MB)
​
Credits to the one who captured the OTA links...
Click to expand...
Click to collapse
OTA LMY48K from LMY47V (LP 5.1.1) UNIVERSAL
OTA LMY48K for SPROUT4 and SPROUT8 LMY47V users only(18+ MB)
​
Credits to the one who captured the OTA links...
Click to expand...
Click to collapse
OTA LMY47V from LMY47O (LP 5.1.1) UNIVERSAL
OTA LMY47V for SPROUT4 and SPROUT8 LMY47O users only(11+ MB)
Unroot first...then flash via custom recovery...​Credits to the one who captured the OTA links for Sparkle V and Nexian Journey One...
Click to expand...
Click to collapse
Flash at your own risk :good:
.
Credits : google, xda, varun.chitre15, OTA catchers, IntersectRaven, ghpranav, AHartmen, JGodslave, moulnisky, xpirt, rhar****, akhilnarang
.

will it work on stock micromax canvas a1? I've never rooted nor unlocked the bootloader. My phone is pure stock.

-BRK- said:
will it work on stock micromax canvas a1? I've never rooted nor unlocked the bootloader. My phone is pure stock.
Click to expand...
Click to collapse
it might work with locked bootloader, but it might not work with stock recovery. This ROM was based on Sparkle V OTA LMY47O + OTA LMY47V, 99% is unmodified except the updater-script to make the OTA fuse together and universal. So i am 100% sure it would work if you flash it thru custom recovery.

How to verify signature...??? Plz reply...

Vaibhavtheboss said:
How to verify signature...??? Plz reply...
Click to expand...
Click to collapse
If you are running windows os just download HashTabs and install. Right click on the downloaded file then click properties and click "FILE HASHES" tab, verify if md5 hash are the same. On unix based system just execute this line in the terminal "md5sum SPROUT4-STOCK-ROM-LMY47V.zip" then compare the md5 hash. If the hash are identical you are good to go... If not, your file was corrupt

Done... flashed it through Philz recovery... everything fine... Now on Stock Android 5.1.1
Sent from my Sparkle V using XDA Free mobile app

Vaibhavtheboss said:
Done... flashed it through Philz recovery... everything fine... Now on Stock Android 5.1.1
Sent from my Sparkle V using XDA Free mobile app
Click to expand...
Click to collapse
Im glad it worked for you mate

installed an OTA for sprout8 all variant in my mito impact a10. but it stuck bootloop. any idea? I've installed stock kernel 5.1
Sent from my MITO_A10 using XDA Forums

mrahmanda said:
installed an OTA for sprout8 all variant in my mito impact a10. but it stuck bootloop. any idea? I've installed stock kernel 5.1
Sent from my MITO_A10 using XDA Forums
Click to expand...
Click to collapse
Which ota did you flash? factory reset might work. You have to unroot first before you flash any 11mb ota. If all else fail you could try the stock rom for SPROUT8 above, already updated to 5.1.1 and compatible with all sprout8 device such as mito impact. Just flash it thru custom recovery.

installed sprout 4 for my nexian journey one, it works like a charm
thank you so much :good:

1cefire said:
Which ota did you flash? factory reset might work. You have to unroot first before you flash any 11mb ota. If all else fail you could try the stock rom for SPROUT8 above, already updated to 5.1.1 and compatible with all sprout8 device such as mito impact. Just flash it thru custom recovery.
Click to expand...
Click to collapse
the universal one.
yes, i think it is a little bit odd. i can find solution for my case :/
but thanks anyway
Sent from my MITO_A10 using XDA Forums

Cant intall or open
Flashing via PhilzTouch and current installed rom is CM12.1
i cant install the Rom for Sprout 8 Cherry mobile One version

mahesoo said:
installed sprout 4 for my nexian journey one, it works like a charm
thank you so much :good:
Click to expand...
Click to collapse
mrahmanda said:
the universal one.
yes, i think it is a little bit odd. i can find solution for my case :/
but thanks anyway
Click to expand...
Click to collapse
You're welcome dudes
gestrinix said:
Cant intall or open....Flashing via PhilzTouch and current installed rom is CM12.1
i cant install the Rom for Sprout 8 Cherry mobile One version
Click to expand...
Click to collapse
If you can't open the file It was probably corrupt. Read back to post #5 and try to verify the md5 hash. I was running cm 12.1 before, and currently running SPROUT8 on my 4gb variant Myphone UNO... running smooth without any hiccups... If the hash is not identical, try redownloading the file. Here is the md5 checksum
[SPROUT8 MD5] 0063e621f6ffed6d0fe142de7e502d4d
SPROUT8 running on 4gb variant MyPhone Uno

Do you have stock recovery for 5.1.1 sprout8?

fachry_my_id said:
Do you have stock recovery for 5.1.1 sprout8?
Click to expand...
Click to collapse
You don't have to go back to stock recovery to flash the ROM. Just flash it thru custom recovery, Philz/TWRP works fine

After flashed this.. I lost philz custom recovery. When I tried to get into recovery, it shows broken android symbol

Kumarankav said:
After flashed this.. I lost philz custom recovery. When I tried to get into recovery, it shows broken android symbol
Click to expand...
Click to collapse
I guess what you saw was stock recovery. But the strange thing is this ROM does not include stock recovery. Are you sure you flashed the same ROM? maybe you flash a different one? This ROM is basically the same official OTA LMY47O from this thread and the official OTA LMY47V. I have flashed both ROMS a couple of times without problems... Anyhow, if you want to go back to custom recovery just install another one thru fastboot, allinonetools, flashify and so forth
Here's a proof... Only Boot.img (kernel) and System partition + OTA LMY47V are included

error update from 5.1 to 5.1.1 mito impact A10
II've tried to update mito a10 impact of LMY470 to LMY47V via ota always want to install the update error after ..
mito I've never been in the root ..
is there a solution?

Thanks
im using evercoss a65 and its work
tyvm

agUNg.XENOS.inc said:
II've tried to update mito a10 impact of LMY470 to LMY47V via ota always want to install the update error after ..
mito I've never been in the root ..
is there a solution?
Click to expand...
Click to collapse
Did you flash the OTA LMY47O from 4gb variants before? Or are you using custom recovery? The best way is to Join Mito Impact a10 FB group and ask them if they have Official Ota LMY47V for mito, just flash it with stock recovery once you have the official ota. If it fails to flash, try factory reset then flash the official ota again. If all else fail, just flash a custom recovery with fastboot method without rooting your device, then flash the SPROUT8 version in the OP.
morissax said:
im using evercoss a65 and its work
tyvm
Click to expand...
Click to collapse
welcome mate

Huawei honor 4x Marshmallow rooting

Marshmallow beta update already out for selected users. but root access still not available. supersu /superuser not working. but TWRP latest worked
any idea how to root marshmallow version..

Honor 4x devs plz help us root official emui 4 android m, latest twrp is working fine but rooting failed
Sent from my Che1-L04

I would also really appreciate a method of rooting this phone on Marshmallow.

I did test every SuperSU version in my phone but didn't work out
Twrp is working correctly but SuperSU.....????d

Hello if you have issues just install latest CW 13 Build it is pre rooted!

Try this
I tried and failed
This website is in Arabic use Google translate and try
ir-mob*ir %12162*html
Replace * with . and % with /

Flash this zip in TWRP to root Marshmallow: https://www.androidfilehost.com/?fid=24591000424939898

hackslash said:
Flash this zip in TWRP to root Marshmallow: https://www.androidfilehost.com/?fid=24591000424939898
Click to expand...
Click to collapse
Thank you @hackslash
Tried it,But it didn't work for che1-l04
Sent from my Che1-L04 using XDA-Developers mobile app

tuiyaan said:
Thank you @hackslash
Tried it,But it didn't work for che1-l04
Sent from my Che1-L04 using XDA-Developers mobile app
Click to expand...
Click to collapse
Did the zip flashed successfully or it gave you a flashing error in TWRP. Remember, that in order for the zip to work, you must be on clean stock ROM which hasn't been attempted to root before.

hackslash said:
Did the zip flashed successfully or it gave you a flashing error in TWRP. Remember, that in order for the zip to work, you must be on clean stock ROM which hasn't been attempted to root before.
Click to expand...
Click to collapse
flashed the zip in fresh stock ROM(restored via TWRP)
no error message was displayed.

anyone else please try it and report for model che1-l04

sorry for spam but it is a matter of life and death
http://forum.xda-developers.com/honor-4x/help/help-bricked-device-honor-4x-che2-l12-t3457722
PLEASE HELP ME

nothing seems to be working
None of the super user apps are working,
get the message "patching sepolicy" failure,
When flashing in twrp..

hackslash said:
Did the zip flashed successfully or it gave you a flashing error in TWRP. Remember, that in order for the zip to work, you must be on clean stock ROM which hasn't been attempted to root before.
Click to expand...
Click to collapse
did the flashing of 1.zip again on clean stock rom
got following error :
patching sepolicy
--failure aborting

tuiyaan said:
did the flashing of 1.zip again on clean stock rom
got following error :
patching sepolicy
--failure aborting
Click to expand...
Click to collapse
Flash stock boot.img and then flash the zip. The boot image currently on your device is already patched hence you're facing this error.

hackslash said:
Flash stock boot.img and then flash the zip. The boot image currently on your device is already patched hence you're facing this error.
Click to expand...
Click to collapse
tried it still results are same

is rooting MM emui4 for che1-l04 not possible?
is this impossible to achieve?

hackslash said:
Flash this zip in TWRP to root Marshmallow: https://www.androidfilehost.com/?fid=24591000424939898
Click to expand...
Click to collapse
how to install twrp ?
``

ElmohandsX said:
how to install twrp ?
``
Click to expand...
Click to collapse
You can find guides on xda, just search

can any one help ?
boot.img for mm che1-l04 is in link
please use it find a method to root .
https://www.dropbox.com/sh/mcfikgdow56z6g4/AADJt5NzYIpxB4ZlcDrqllO9a?dl=0

OTA update with TWRP

Hi,
I have done root using TWRP and set TWRP as permanent recovery.
Now, yesterday new EUI 5.8.x OTA is downloaded but not able to flash it.
kindly guide how to update using TWRP.

acharya.tejas said:
Hi,
I have done root using TWRP and set TWRP as permanent recovery.
Now, yesterday new EUI 5.8.x OTA is downloaded but not able to flash it.
kindly guide how to update using TWRP.
Click to expand...
Click to collapse
For OTA updates you need stock recovery

Or download the full rom and flash thorthrough twrp

Yes i agree. You need one of the above mentions. Either you should have a stock rom or flash the whole firmware update version.
Sent from my Le X526 using Tapatalk

How to update Resurrection Remix OTA update on Mi A2?

I recently installed RR rom and now I got notification saying Update is available (about 800mb). I don't know how to install it . So can anyone tell me the full procedure to update Resurrection Remix (or any custom) Rom on Mi a2. I downloaded the update Zip file once but after completing it says Zip verification faield so I thought it's maybe I don't know how to install it.?? So please tell me the full procedure. Thank you

dextercrypt said:
I recently installed RR rom and now I got notification saying Update is available (about 800mb). I don't know how to install it . So can anyone tell me the full procedure to update Resurrection Remix (or any custom) Rom on Mi a2. I downloaded the update Zip file once but after completing it says Zip verification faield so I thought it's maybe I don't know how to install it.?? So please tell me the full procedure. Thank you
Click to expand...
Click to collapse
Whats this XDA noones replying to my thread

try from twrp

can you tell me how you installed the rom please, for reasons I do not know I can not install the rom on my phone

laviniu_c said:
try from twrp
Click to expand...
Click to collapse
I don't the TWRP method and I want to update through system updater.

ferk42 said:
can you tell me how you installed the rom please, for reasons I do not know I can not install the rom on my phone
Click to expand...
Click to collapse
Tell me where i cancontact you so I can tell you step by step . Or pm me in XDA. Whichever u like

Go to updater in setting and hit install button. First it will download the update and then update it.
But keep these things in mind.
1.After update is finished your Twrp will be gone if you had permanent twrp before.
2.All app permissions will he reset.
3.And updating through system update takes around 2-3 hrs(,may take more or less)

Abhishekshuklapolice said:
Go to updater in setting and hit install button. First it will download the update and then update it.
But keep these things in mind.
1.After update is finished your Twrp will be gone if you had permanent twrp before.
2.All app permissions will he reset.
3.And updating through system update takes around 2-3 hrs(,may take more or less)
Click to expand...
Click to collapse
So after updating, what should I do? And how to keep magisk too... ?? ( Bhai bata de where can I contact you about full procedure kyuki main bhi indian hu hun) ?

How to update OTA in RR
dextercrypt said:
I recently installed RR rom and now I got notification saying Update is available (about 800mb). I don't know how to install it . So can anyone tell me the full procedure to update Resurrection Remix (or any custom) Rom on Mi a2. I downloaded the update Zip file once but after completing it says Zip verification faield so I thought it's maybe I don't know how to install it.?? So please tell me the full procedure. Thank you
Click to expand...
Click to collapse
Boot into TWRP
Wipe cache/Art and system partition
flash ota of RR and latest Gapps
Thats it :good: