SuperSU Problem on CM13 (SM-G900F) - SuperSU

hey so i got this problem with my SuperSU:
i always get an error of SuperSU (see image) and if i reflash it in TWRP then it works for maybe 20/30 mins but then i get that same error again? can someone please help me?
thanks ^_^
http :// imgur. com/ X9BC0EI (Remove spaces please)
Translation of the error:
There is no SU, and SU binary installed there can be no install. This is a problem!
If you've switched to Android just 5.0, then you need your device manually re-root please refer to the relevant forums for your device.

Same problem
I have the same problem :/
CM 13, Samsung S2 PLus

same here.
Galaxy s6 edge g925f with official 6.0 beta (stock deodexed rom)

Same Problem G900F

Related

Exposed Framework issues Galaxy S5 (T-MobIle)

I am not sure if there has already been a thread to this issue, if there is please direct me to it.
I am currently using a rooted Galaxy S5 (T-Mobile) Android version 5.0. I have installed Exposed using TWRP recovery with a . I have run into an issue when i reboot my phone. It gets lockedup in the boot screen ( sometimes it will get locked up on the Samsung screen and others it will get locked on the T-mobile screen)
Can someone please direct me to either a helpful thread or assist me on this issue i would be grateful.
You are already in xposed general, you just have to scroll for the right topic for you... There are unofficial versions for your device... See what works for your setup...
Sent from my HTC One M9 using Tapatalk
the error that comes up when installing Expose reads
" E:Error executing updater binary in zip '/external sd card/xposed-v79.0-sdk22-arm-custom-build-by-wanam20151217.zip
????
i have found the correct files that i believe to work. one last question.
will it work on TWRP or do i have to install CWM?
tumtum83 said:
i have found the correct files that i believe to work. one last question.
will it work on TWRP or do i have to install CWM?
Click to expand...
Click to collapse
TWRP is recommended for installing Xposed.
tumtum83 said:
the error that comes up when installing Expose reads
" E:Error executing updater binary in zip '/external sd card/xposed-v79.0-sdk22-arm-custom-build-by-wanam20151217.zip
Click to expand...
Click to collapse
You said your ROM is on Android 5.0, that's SDK21, not SDK22. You must install Exposed for SDK21. And use the custom version which doesn't cause bootloops.
MI3W 64GB/Tapatalk
I have unpdated my phone to 5.1.1 that should be sdk22 correct!?
tumtum83 said:
I have unpdated my phone to 5.1.1 that should be sdk22 correct!?
Click to expand...
Click to collapse
Yes, that's correct.

Samsung Galaxy S5 mini G800F Android 5.1.1 Root - how to do it?

Hello,
I was wondering if it is possible to root Samsung Galaxy S5 mini G800F Android 5.1.1. I only found options to perform a root with either G800H instead of G800F or on Android 4.2.2 instead of 5.1.1....
In other threads similiar questions occured but however remained unanswered. I hope someone can help me out.
Thank you
Best regards
Totalnab said:
Hello,
I was wondering if it is possible to root Samsung Galaxy S5 mini G800F Android 5.1.1. I only found options to perform a root with either G800H instead of G800F or on Android 4.2.2 instead of 5.1.1....
In other threads similiar questions occured but however remained unanswered. I hope someone can help me out.
Thank you
Best regards
Click to expand...
Click to collapse
Odin + cfauto root
or
Custom recovery + flash su
balu1977 said:
Odin + cfauto root
Click to expand...
Click to collapse
When i browse through "https://autoroot.chainfire.eu/"
I find only a download link for:
samsung SM-G800F kminiltexx kminilte universal3470 exynos3 KOT49H.G800FXXU1ANH2 4.4.2
where it says something with Android 4.4.2
So i can still use that one for my 5.1.1?
Thank you
Edit: ALso if its possible, can u share a link with a working Odin? Im not sure if i can use the same that i used for my other smartphone (motorola)
Totalnab said:
When i browse through "https://autoroot.chainfire.eu/"
I find only a download link for:
samsung SM-G800F kminiltexx kminilte universal3470 exynos3 KOT49H.G800FXXU1ANH2 4.4.2
where it says something with Android 4.4.2
So i can still use that one for my 5.1.1?
Thank you
Edit: ALso if its possible, can u share a link with a working Odin? Im not sure if i can use the same that i used for my other smartphone (motorola)
Click to expand...
Click to collapse
that is the way it is working for me. please, do not this steps if you not knowing what you do.
i' m not responsible for damage of your device.
—————
flash LP 5.1.1
factory reset of phone
5.1.1 flashed / odin used
installed superuser 2.6.6.apk - started but binary missing - no root
http://www.sammobile.com/firmwares/
—————
Root
installed CF-Auto-Root-kminilte-kminiltexx-smg800f.zip / odin used
(working for me on a fresh flashed 5.1.1 + pit file)
— now rooted —
https://download.chainfire.eu/523/CF...xx-smg800f.zip
thanks to chainfire
—————
Recovery
installed twrp_kminilte-build3.tar / odin used
https://s.basketbuild.com/devs/rutvikrvr/kminilte/twrp
thanks to Mini-bio
—————
Deodex
pulled from system via ADB -> app, framework and priv-app
(can also extracted from flashfile, system.img with other tools)
deodexed -> app, framework and priv-app with SVAdeodexer (build.prop needed in systemfolder)
deleted in system on phone folder-> app, framework and priv-app via recovery file manager (mount system first)
copy deodex folder to system and set chmod 755
http://forum.xda-developers.com/gala...oid-l-t2972025
thanks to svadev
—————
xposed framework
installed xposed alpha for lollipop and flashed via twrp xposed-v79.1-sdk22-arm-custom-build-by-wanam-20160120.zip
http://forum.xda-developers.com/xpos...lipop-t3180960
thanks to wanam
cheers, septamobile
Maybe there is a easier way to root my G800F ? could someone help ?
i have android 5.1.1 tw version and there is no root files for this android
Kenik959 said:
Maybe there is a easier way to root my G800F ? could someone help ?
i have android 5.1.1 tw version and there is no root files for this android
Click to expand...
Click to collapse
https://download.chainfire.eu/523/CF...xx-smg800f.zip
yepp, above chainfire works like a charm with 5.1.1.
This time I flashed 5.1.1 without factory reset over 4.4.2 with odin. then chainfire, then twrp. no probs whatsoever. every app and setting seem to work without having to start from scratch
are you sure it's for android 5.1.1 bobbobagan ?
Kenik959 said:
are you sure it's for android 5.1.1 bobbobagan ?
Click to expand...
Click to collapse
Did you manage to root the phone?
GM800F 5.1.1 T-Com Croatia
Works for me without problems. Updated today to 5.1.1, used CF-Auto-Root-kminilte-kminiltexx-smg800f.zip, all OK
CF Auto Root with Android 6.0.1
Has anyone tried CF Auto Root with Android 6.0.1 ?

5.1.1 Stock firmware needed for my N9208 (Taiwan) version..

Hi All,
Earlier i was on Stock 5.1.1 and then get OTA update for 6.0.1 and updated.
Then i installed TWRP recovery from ODIn and installed IOIO V6 custom ROM. and then stuck at Samsung Boot logo.
I already tried to install Stock 6.0.1 firmware but then after restart it ask for DRK. and stops at Stock recovery.
i read somewhere to install 5.1.1 stock will resolve everything. I have found on SAMMOBILE but its too slow i.e. it shows 2 days left time... My broadband speed is limited to 2 MBp/s only.
So please help me.
Please read RULES for posting in Development before posting here.
Thnx CafeKampuchia. Sorry for this.

GALAXY S6 - AT&T 7.0: Having some issues with Rooting/Installing TWRP Recovery

So i have the galaxy s6 g920aucu6eqcf - at&t on version 7.0 and i have been trying to find a way to root this thing for the past few days without any success. i tried a tutorial i found online and i got an error on the download menu code: SECURE CHECK FAIL: (RECOVERY) while trying to install TWRP RECOVERY with ODIN. I have never rooted this phone or a galaxy device in general so i am kinda lost on what i am to do to be quite honest. is it even possible with my phone? with every tutorial i found it has different baseband versions listed in compatibility lists. any help is greatly appreciated !
Not currently possible.

[SOLVED]/Help/ Update Lineage 13.0 to Lineage 15.1 GN7000

Hello guys,
I don't know if here is the good place to post. My bad and SORRY for my english, I'm french and I'm learning by myself specially in watching tv series with subtitles :fingers-crossed:
I'm currently on version Lineage 13.0-20170204-UNOFFICIAL-n7000 (6.0.1) and I would like to install OREO 8.1.0 (Lineage 15.1).
I don't want to mess up everything so I ask for help as I know I can rely on tips here.
Should I install Lineage 14 first and then move to 15? There is explanation on Updating If you are running an earlier NightOwl cm15.1 alpha version: but nothing if we are on other version. Is the cm version important here? It must be another cm15 or it works no matter version we installed? So I'm confused and after spending 1 month to recover a BLOD Nexus 5X without recovery and locked fastboot... I know I must check twice before doing anything.
So if someone can enlighten me. Thank you
Edit :
I followed Updating If you are running an earlier NightOwl cm15.1 alpha version.
When I try to flash the ROM, it end up with :
- detected filesystem ext4 for /dev/block/mmcblk0p9
- Patching system image unconditionally...
- E1001 : Failed to update system image.
- Updater process ended up with ERROR : 7
- Error installing zip file '/sdcard0/Nightowl-lineage15.1-beta2-n7000.zip
Help please. Thank you
yessade said:
Hello guys,
I don't know if here is the good place to post. My bad and SORRY for my english, I'm french and I'm learning by myself specially in watching tv series with subtitles :fingers-crossed:
I'm currently on version Lineage 13.0-20170204-UNOFFICIAL-n7000 (6.0.1) and I would like to install OREO 8.1.0 (Lineage 15.1).
I don't want to mess up everything so I ask for help as I know I can rely on tips here.
Should I install Lineage 14 first and then move to 15? There is explanation on Updating If you are running an earlier NightOwl cm15.1 alpha version: but nothing if we are on other version. Is the cm version important here? It must be another cm15 or it works no matter version we installed? So I'm confused and after spending 1 month to recover a BLOD Nexus 5X without recovery and locked fastboot... I know I must check twice before doing anything.
So if someone can enlighten me. Thank you
Click to expand...
Click to collapse
SOLVED
yessade said:
Edit :
I followed Updating If you are running an earlier NightOwl cm15.1 alpha version.
When I try to flash the ROM, it end up with :
- detected filesystem ext4 for /dev/block/mmcblk0p9
- Patching system image unconditionally...
- E1001 : Failed to update system image.
- Updater process ended up with ERROR : 7
- Error installing zip file '/sdcard0/Nightowl-lineage15.1-beta2-n7000.zip
Help please. Thank you
Click to expand...
Click to collapse
I went to WIPE-ADVANCED and format Kalvin, Cache, System and Data.
- Flash lanchon REPIT
- Flash the rom without error.
After successfully flashed the ROM, Wipe Kalvin cache and flash gApps.
After "5-7"minutes of rebooting, the phone was updated to CM15 and running smoothly.
If my post can help someone else.
Admin, this thread can be tag SOLVED.

Categories

Resources