Related
Given the recent explosion of nightly users, there is a need for a place to discuss them, and/or ask if other users are having similar issues as you...this is that place
DO NOT: Post to the bug tracker
DO NOT: Open another thread (Please)
DO NOT: Think of this as official forum support; this thread will be strictly user to user support. Don't expect CM-dev help.
Code:
** These CyanogenMod builds are highly experimental and unsupported.
**
** Please refrain from submitting bug reports for any issues
** you may encounter while running one of these builds.
**
** Submitting bug reports on nightly builds is the leading
** cause of male impotence.
Download: link
Google Apps addon:
Mirror: link
Mirror: linkChangelog: @cmsrc
Ah, and the daily flashing addiction begins again... like smack, but for geeks
Thanks guys! Downloading nightly #0 now
Sorry, I'm noob in CM story, what is nightlies? The intermediate version between stable versions? Why no bug repports? There is official forum where bugs are reported?
200mpx said:
Sorry, I'm noob in CM story, what is nightlies? The intermediate version between stable versions? Why no bug repports? There is official forum where bugs are reported?
Click to expand...
Click to collapse
Nightly builds are published test builds and unsupported. They always have been. They are experimental, volatile and too many issues come and go to be clogging up the bug tracker (intended for releases) with them. These are NOT primarily for users; they are to test the build process and for developers and device maintainers to evaluate. They are shared with users under these conditions, so you can use them or not, but issues with nightly builds are categorically rejected in the bug tracker. Hence; threads like this.
If I'm running the RC0 now, do I just flash it on top or do a clean install? And are the subsequent nightlies flashed on top or clean install every time?
Sent from my Incredible S using XDA App
The nightlies aren't for everyday use, and they can also not work at all (i.e bootloop). If you need to ask questions, chances are you should probably stick with RC0
Like attn said the nightlies are for devs and device maintainers, and more advanced users who are interested in the very, very latest code but they are totally unsupported releases, hence the no bug reports & questions angle. If a particualr nightly gives good performance increase or a new feature that is sought after, you will probably hear about people using a particular nightly n the forums, in which case it tends to be safe to flash it like a normal ROM (yet still totally unsupported)
Cardiiiii said:
If I'm running the RC0 now, do I just flash it on top or do a clean install? And are the subsequent nightlies flashed on top or clean install every time?
Sent from my Incredible S using XDA App
Click to expand...
Click to collapse
I thiink this one is safe to flash over RC0.
It should fix the flashlight issue.
attn1 said:
I thiink this one is safe to flash over RC0.
It should fix the flashlight issue.
Click to expand...
Click to collapse
Yes and yes, flashed straight over RC0 and torch works on high brightness without breaking screen backlight
One more small bug in rc0 theusing the defaultv videos app when I play a video the keyboard light turns off..
Sent from my HTC Incredible S using XDA Premium App
Had issue #1 in the nightly #1 (06/24) as well. On Nightly #2 (06/25) and I still have that issue and have noticed another one. Can someone confirm if they have it too?
1) Switching cameras (front to back and vice versa) freezes camera. Camera doesn't work until I reboot. Once rebooted, the camera shows the image from the camera you selected fine. Might be an issue with the code not properly initializing the camera from which data is to be taken or not properly releasing the camera being used first.
2) In the music player, the progress bar seems a bit off.. there is a disconnect. If someone can tell me how to take a good screenshot, I will
A (rather) lame way to show it in ASCII would be..
---------__O-------------
when it should be..
-----------O-------------
Can anyone confirm?
Yeah there is some camera bug in the latest nightly, worked fine the first time after flashing, but black screen and crashing since then.
Sent from my Incredible S using XDA App
Cardiiiii said:
Yeah there is some camera bug in the latest nightly, worked fine the first time after flashing, but black screen and crashing since then.
Sent from my Incredible S using XDA App
Click to expand...
Click to collapse
Bizarrely, I can still make the camera work if I launch it using WidgetLocker (my custom lockscreen replacement app) but I suffer the blackout bug if I try and launch it from the drawer or a homescreen shortcut.
FYI, Nightly #3 is out.. time to go grab it!
http://download.cyanogenmod.com/?device=vivo
John Anderton said:
FYI, Nightly #3 is out.. time to go grab it!
http://download.cyanogenmod.com/?device=vivo
Click to expand...
Click to collapse
Seems that I have battery drain with this version. Also my camera started to crash after some time
Sent from my Incredible S using Tapatalk
200mpx said:
Seems that I have battery drain with this version. Also my camera started to crash after some time
Sent from my Incredible S using Tapatalk
Click to expand...
Click to collapse
Nice to know it wasn't just me.
It lasted me 19 hours 50mins from 100% to 48%. 3 hours later, it went to 8% and needed a charge
Flashed RC1. Let's hope it does well Charging up the battery now
Camera works well.. No issues with it so far in a brief test.
Had noticed another issue in Nightly 3. Was playing music and the phone auto switched off for power save. A couple of mins later I hit vol up for vol increase and the player skipped to the next song
Wasn't able to reproduce it since.
John Anderton said:
Nice to know it wasn't just me.
It lasted me 19 hours 50mins from 100% to 48%. 3 hours later, it went to 8% and needed a charge
Flashed RC1. Let's hope it does well Charging up the battery now
Camera works well.. No issues with it so far in a brief test.
Had noticed another issue in Nightly 3. Was playing music and the phone auto switched off for power save. A couple of mins later I hit vol up for vol increase and the player skipped to the next song
Wasn't able to reproduce it since.
Click to expand...
Click to collapse
Haha, I had that strange pattern too, 18h and 55% left, and suddenly it started to discharge like a mofo, on Nightlies 4 now, will report if it's any better.
Flashing Nightlies is such an addiction, and the battery life seems stable and the decrease is steady, no drastic reduction.
Cardiiiii said:
Haha, I had that strange pattern too, 18h and 55% left, and suddenly it started to discharge like a mofo, on Nightlies 4 now, will report if it's any better.
Click to expand...
Click to collapse
Had the same issue with RC1 today Will get Nightly 5 now and check
Could you also play a music track and skip half way and check if the seek bar line is a misaligned? I've had that issue from Nightly 2 as well
John Anderton said:
Could you also play a music track and skip half way and check if the seek bar line is a misaligned? I've had that issue from Nightly 2 as well
Click to expand...
Click to collapse
Was that in the default player? I only ask cause Fede's Ubermusic got a fix in beta to fix this exact problem
l0st.prophet said:
Was that in the default player? I only ask cause Fede's Ubermusic got a fix in beta to fix this exact problem
Click to expand...
Click to collapse
The default player. The one which launches when I click "Music".
I've kinda settled on Nightly 5. 36 hours gone and I'm still at 68% charge Will let the run keep going until I have to charge it again
I looked at the posts in the dev section to see if anyone else had this problem, also noticed there is no Q&A for this ROM otherwise I'd post it there, I'd also post this there but I have less than 10 posts ;(. But around 2 days ago I flashed this ROM and all of a sudden the screen itself started to glitch, like half of the screen would split and disappear completely for a few seconds then reappear, then it would do it again but to the other half of the screen. Also restarted my phone to see if this would continue but it got stuck in a boot loop so I just flashed another ROM on the phone and it's been working fine so far, any ideas on how this happened? Would be appreciated..
cOld1 said:
I looked at the posts in the dev section to see if anyone else had this problem, also noticed there is no Q&A for this ROM otherwise I'd post it there, I'd also post this there but I have less than 10 posts ;(. But around 2 days ago I flashed this ROM and all of a sudden the screen itself started to glitch, like half of the screen would split and disappear completely for a few seconds then reappear, then it would do it again but to the other half of the screen. Also restarted my phone to see if this would continue but it got stuck in a boot loop so I just flashed another ROM on the phone and it's been working fine so far, any ideas on how this happened? Would be appreciated..
Click to expand...
Click to collapse
It might have been a bad flash. Try redownloading the rom and flash again. Also, make sure that you do not have too many apps installed. How much free space do you have on system?
The only apps that I had were the ones that came with the ROM itself, didn't download anything before or after flashing it.
may i know does this rom support audience cancelling noise?
thx
I wanted to know which kernel is the best to flash with thi ROM other than glitch kernel that comes with the Rom.
The glitch kernel has a problem that you can't make a NANDROID backup with it. What other kernels does this ROM support can anybody post a link to one. I tried searching but couldn't find one
scrypt said:
I wanted to know which kernel is the best to flash with thi ROM other than glitch kernel that comes with the Rom.
The glitch kernel has a problem that you can't make a NANDROID backup with it. What other kernels does this ROM support can anybody post a link to one. I tried searching but couldn't find one
Click to expand...
Click to collapse
ICS ones, but the Dev thread tells that & more.
I don't miss Nandroid when I'm backing up with Super Manager, Super Backup for data, apks, call logs and SMS.
cOld1 said:
I looked at the posts in the dev section to see if anyone else had this problem, also noticed there is no Q&A for this ROM otherwise I'd post it there, I'd also post this there but I have less than 10 posts ;(. But around 2 days ago I flashed this ROM and all of a sudden the screen itself started to glitch, like half of the screen would split and disappear completely for a few seconds then reappear, then it would do it again but to the other half of the screen. Also restarted my phone to see if this would continue but it got stuck in a boot loop so I just flashed another ROM on the phone and it's been working fine so far, any ideas on how this happened? Would be appreciated..
Click to expand...
Click to collapse
When my screen first appears after a reboot it does that, too, shows half the screen, then the other half, but only for a couple of seconds, I figured it's because it's still reading media, loading widgets, screen, etc. Doesn't last more than 2 seconds, fortunately.
cOld1 said:
I looked at the posts in the dev section to see if anyone else had this problem, also noticed there is no Q&A for this ROM otherwise I'd post it there, I'd also post this there but I have less than 10 posts ;(. But around 2 days ago I flashed this ROM and all of a sudden the screen itself started to glitch, like half of the screen would split and disappear completely for a few seconds then reappear, then it would do it again but to the other half of the screen. Also restarted my phone to see if this would continue but it got stuck in a boot loop so I just flashed another ROM on the phone and it's been working fine so far, any ideas on how this happened? Would be appreciated..
Click to expand...
Click to collapse
Were you still running the Glitch kernel that installs with the ROM?
It's odd that it went from working to not working. It sounds like something changed something which caused a conflict or corruption... it wouldn't have boot looped otherwise.
If not had any issues like this...
It was a fresh install of the ROM itself, was running for ~ 5 minutes. I didn't install anything via the Market or anything like that....
Un-invert Calendar?
I like Doc's V5 ROM a lot. Best I've used so far. However, I don't care for the inverted apps and am using the "Revert Inverted Apps to Stock" tweak mentioned here. It works just as expected except for the Calendar app - it remains inverted.
Can anyone else confirm so I'll know it's not just me?
Does anyone have a solution?
Thanks!
Bob
Only quirk I had with V5 was Gmail force closed constantly, even though I never use it. It would just notify me repeatedly that Gmail, an app I never touched, was force closing. Wiped caches and fixed permissions. It's been money ever since. Could use stronger battery life, but hey. Beggars can't be choosers.
Sent from parts unknown.
Anyone have vibration issues when receiving texts?
battery life
Battery saving settings - LiveOC 126%, MaxCPU=800*1.26=1008MHz. Nexus KB3 Modem. No deep idle sleep, no screen state settings, no internal voltage settings, ARM voltages are OC/UV. Power saver in ROMSettings enabled.
Boraltis said:
Only quirk I had with V5 was Gmail force closed constantly, even though I never use it. It would just notify me repeatedly that Gmail, an app I never touched, was force closing. Wiped caches and fixed permissions. It's been money ever since. Could use stronger battery life, but hey. Beggars can't be choosers.
Sent from parts unknown.
Click to expand...
Click to collapse
has any one experienced having a feedback loop in either your end or their end when using either the speaker phone or a headset?
Sent from my SGH-I897 using XDA
I am having an issue with the system time. It won't update automatically. Just gets stuck at a particular instance like 3:45 and won't update until I manually change the clock from 24 hours to 12 or vice versa. The happens after long sleep periods like two hours. After this the problem is persistent until I flash a new kernel.
---------- Post added at 04:19 PM ---------- Previous post was at 04:17 PM ----------
xThe Enforcer said:
Anyone have vibration issues when receiving texts?
Click to expand...
Click to collapse
Yes I am having this same problem no vibration with texts
no vibration with texts
Yeah. Same here. No separate vibration for SMS. But if you turn "Vibration only" system wide - it works for SMS.
Awkward.
scrypt said:
Yes I am having this same problem no vibration with texts
Click to expand...
Click to collapse
For guys having SMS problems with vibration. Go to SMS app, press the menu soft key, then settings, and scroll all the way down and enable vibration
Well anybody having an issue with time???please read my previous post^^ and tell me if it's sounds familiar , thanks
It happens when you switch a kernel as well? Try switching ROMs and see if it does it then go back to this, I haven't used this ROM since this incident ( OP ), using DK3 atm =p
b-eock said:
For guys having SMS problems with vibration. Go to SMS app, press the menu soft key, then settings, and scroll all the way down and enable vibration
Click to expand...
Click to collapse
I love you.
Sent from my SGH-I897 using xda premium
Q&A for [ROM][OFFICIAL][KitKat 4.4.4][TENDERLOIN] PAC-man 4.4.4.RC-2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][OFFICIAL][KitKat 4.4.4][TENDERLOIN] PAC-man 4.4.4.RC-2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
PAC ROM on Tenderloin/ HP Touchpad
Hopefully, I am not the only one with this issue. I have searched around but no answers
I installed the latest PAC ROM on my Touchpad and have been able to update it to 4.4.4. I moved over from Evervolv and the performance jump appears to be significant. I do get the sense that the screen resolution/display is a bit reduced and not as high quality as the Evervolv version but it could be a simple case of my eyes deceiving me.
Regardless, here is my question - I have set up multiple users with me being the owner/administrator and the other accounts set up as restricted users .
The device works fine under the Administrator/Owner account. However, the restricted user accounts do not work. I have setup three different accounts and selection of any one of them after startup causes a reboot. Switching from an Administrator/Owner account to the restricted account also leads to a reboot.
Would appreciate any help/guidance/suggestions on how this can be fixed. Thanks.
My device take so long to reboot and also big lack when I use power or home button to wake up the screen. Other than that I love this Rom and using in severeal devices. Running latest 10-31 here.
PAC ROM and Multi-User setup
Hello, any one there to lend a helping hand. Would appreciate any input/guidance shared. Please help. Thanks
awaraarawa said:
Hopefully, I am not the only one with this issue. I have searched around but no answers
I installed the latest PAC ROM on my Touchpad and have been able to update it to 4.4.4. I moved over from Evervolv and the performance jump appears to be significant. I do get the sense that the screen resolution/display is a bit reduced and not as high quality as the Evervolv version but it could be a simple case of my eyes deceiving me.
Regardless, here is my question - I have set up multiple users with me being the owner/administrator and the other accounts set up as restricted users .
The device works fine under the Administrator/Owner account. However, the restricted user accounts do not work. I have setup three different accounts and selection of any one of them after startup causes a reboot. Switching from an Administrator/Owner account to the restricted account also leads to a reboot.
Would appreciate any help/guidance/suggestions on how this can be fixed. Thanks.
Click to expand...
Click to collapse
Any one wanting to help me? Or do I have to post 10 of these silly notes to get to post to the real forums?
Hi
Thanks for the rom, I've had a coupe of issues, hope this feedback helps. The first one was after installing the 3.0 kernel 18 nov rom, mounting the ext partition on Windows 7 was flaky. Attempting to copy large chunks of data back to touchpad would freeze after about 100 to 300 mb. However, plugging in since had worked fine. Strange.
Trebuchet was scaling icons on home screens and drawer. Switched to nova and all looks better.
Next is the pac settings. Just enabling halo once has messed things up with the button bar. Back stopped doing any actions. The button settings section is broken, with buttons and lastly sub menu having top headings of rearrange/settings repeating every time you switch to the settings app. When it's like this neither rearrange our settings respond to key press.
After a reboot back button works for a while, and then stops working (across all apps and launcher).
Flashed 24Nov, back button issue still there, now considering to remove user data. If there's an option to restore pac defaults I might try that.
Sent from my GT-N7000 using XDA Free mobile app
Help with ROM
awaraarawa said:
Hopefully, I am not the only one with this issue. I have searched around but no answers
I installed the latest PAC ROM on my Touchpad and have been able to update it to 4.4.4. I moved over from Evervolv and the performance jump appears to be significant. I do get the sense that the screen resolution/display is a bit reduced and not as high quality as the Evervolv version but it could be a simple case of my eyes deceiving me.
Regardless, here is my question - I have set up multiple users with me being the owner/administrator and the other accounts set up as restricted users .
The device works fine under the Administrator/Owner account. However, the restricted user accounts do not work. I have setup three different accounts and selection of any one of them after startup causes a reboot. Switching from an Administrator/Owner account to the restricted account also leads to a reboot.
Would appreciate any help/guidance/suggestions on how this can be fixed. Thanks.
Click to expand...
Click to collapse
My guess is this channel is not monitored
I have not seen any replies
---------- Post added at 03:39 PM ---------- Previous post was at 03:31 PM ----------
awaraarawa said:
My guess is this channel is not monitored
I have not seen any replies
Click to expand...
Click to collapse
Or my issue is know and there are no solutions
---------- Post added at 03:49 PM ---------- Previous post was at 03:39 PM ----------
awaraarawa said:
Any one wanting to help me? Or do I have to post 10 of these silly notes to get to post to the real forums?
Click to expand...
Click to collapse
I guess I have to post a few times and gain access to the main channel and ask for help
---------- Post added at 03:58 PM ---------- Previous post was at 03:49 PM ----------
I think replying to posts does not count. Only new posts count?
awaraarawa said:
My guess is this channel is not monitored
I have not seen any replies
---------- Post added at 03:39 PM ---------- Previous post was at 03:31 PM ----------
Or my issue is know and there are no solutions
---------- Post added at 03:49 PM ---------- Previous post was at 03:39 PM ----------
I guess I have to post a few times and gain access to the main channel and ask for help
1]---------- Post added at 03:58 PM ---------- Previous post was at 03:49 PM ----------[/SIZE]
I think replying to posts does not count. Only new posts count?
Click to expand...
Click to collapse
Or your issue is so specific that no one else has reported it, and since it's not repeatable, no one can help you. Most likely any issue with multiuser in CM11 is with Android itself, not the ROM. Try some other ROM and see if you have the same problem.
shumash said:
Or your issue is so specific that no one else has reported it, and since it's not repeatable, no one can help you. Most likely any issue with multiuser in CM11 is with Android itself, not the ROM. Try some other ROM and see if you have the same problem.
Click to expand...
Click to collapse
Very valid.........or it could be that there is a problem with the ROM?!
I had a different ROM about two months ago and multi-user worked fine on it. I switched to this ROM for performance. Although I was able to setup multiple users on this ROM, I cannot log in to the additional user accounts that have been setup
Hoping it is a bug with this ROM and I can get educated on the option to fix it. Please help and bump to the regular discussion thread where I can post my request.
Thanks
shumash, thanks for posting the query to the main forum....no answers but that is not the point. Thank you for being helpful and for taking the time. Appreciate it.
Hopefully, there will be an answer OR it might that the ROM does not support this feature. Via a terminal window, I have verified that Android is reporting the max number of users that have been setup. So, have to think it might be bug in the ROM.
awaraarawa said:
shumash, thanks for posting the query to the main forum....no answers but that is not the point. Thank you for being helpful and for taking the time. Appreciate it.
Hopefully, there will be an answer OR it might that the ROM does not support this feature. Via a terminal window, I have verified that Android is reporting the max number of users that have been setup. So, have to think it might be bug in the ROM.
Click to expand...
Click to collapse
I just setup another user account (not a restricted one). Rebooted and logged in with no problems. I'm not sure what the problem is, but it doesn't appear to be with the ROM.
shumash said:
I just setup another user account (not a restricted one). Rebooted and logged in with no problems. I'm not sure what the problem is, but it doesn't appear to be with the ROM.
Click to expand...
Click to collapse
Good golly, that is good news indeed!
So, I retraced all of the work. This time, instead of restricted users, I setup up regular additional users. Kept my fingers crossed, waited for the planets and the stars to align and watched the screen closely. No go. So, something is not quite right then at my end. shumash, thanks for the confirmation.
I did the next best thing. I updated the ROM from Oct 13 build to the latest. Cleaned the cache, installed the ROM and GAPSS and restarted......and then waited......and then waited.......and then some more......and then some more......did I say I waited for the boot process to complete?!
Finally, the screen is up, and I setup the additional users and then selected the new user to login. It worked! Deleted the new user and setup a restricted user. It worked! So, only thing I can figure out from this excitement is that the old ROM had a problem which has been fixed in the new ROM....or some gremlins were out to get me and they are now gone.
Either way, thank you. I have a working device. Will play with it some more and share feedback if u like....but here are a couple to consider - the start up process is taking almost five minutes....my PC boots faster! The Oct ROM was a snap to boot up but this is on the slow train to nowhere! Not sure what happened last night but I went to bed after the update around 2:30am....turned the device on at 9am and found the battery had run down completely. Not sure why.
Seems there are some compatibility problems with online audio streaming and blue tooth speakers? I cannot get TuneIn to work with external blue tooth speakers. The stream is lost and TuneIn craters......will give it a try for a few more days. TuneIn itself works fine. But when I try to stream to an external speaker via BT, it is goodbyesville.
let me know if you want me to share feedback.....and if u bump me into the main forum, I can post it right there rather than this rookie holding space!
A bit of an update......figured a few more things in life with this ROM
The battery issue was a one-time thing. Have not seen that drainage issue again. So, good news. What I did see is some thing is not quite right in how the battery is getting charged. My completely drained battery was fully charged in less than 30 minutes.....something that takes quite a few hours normally. I can only chalk it to something not quite right with the code in the ROM regards battery charging and capacity. Backing this is the Battery Doctor app.....while it states the battery is fully charged, the ROM indicates charging is not yet complete. Not sure which one or if both of them are getting inaccurate read on the battery in this ROM. Will keep an eye on it for a bit more time but no issue with battery drainage
Same story on the wireless streaming on BT. It was a bad call. All is fine but I seemed to have lost all of my bookmarks in TuneIn. Had to set them up again but will keep an eye on them.
Now if only I can get excited about watching paint dry or the grass growing while it reboots.....sigh!
Another update.....there is still something funky with the battery charging. I thought it was a mistake and a non-issue in my update yesterday. There is an issue. My tablet went to deep freeze last night. Cannot quite figure out what the issue is.
The tablet was at 65% charge when I was ready to call it a night around 2am. To be sure that there was nothing else that would cause problems, I rebooted the tablet and set it aside. The battery charge went down to 64% after the reboot. Set it aside for the night to check on its performance. Tried to turn it on @ 9am approx and the device would not come one. No sign of life when placed on the charging stand. Not even the dead/empty battery sign. Left it there for a few hours and still now sign of life. Did a hard reset of the tablet and it came one and displayed a charge of 13%. That is after it was on the charging stand for atleast 3 - 4 hours which accounts for the little bit of charge it showed. Took all day to get full charged. Did not touch it until it was fully charged. I am going to do the same tonight i.e. reboot the tablet and set it aside. Will see what happens.
Anyone experience this with the Dec release of the ROM? I installed the Battery Monitor widget to see if I can figure out what is going on. Will share an update when I see a bit more information.
awaraarawa said:
Another update.....there is still something funky with the battery charging. I thought it was a mistake and a non-issue in my update yesterday. There is an issue. My tablet went to deep freeze last night. Cannot quite figure out what the issue is.
The tablet was at 65% charge when I was ready to call it a night around 2am. To be sure that there was nothing else that would cause problems, I rebooted the tablet and set it aside. The battery charge went down to 64% after the reboot. Set it aside for the night to check on its performance. Tried to turn it on @ 9am approx and the device would not come one. No sign of life when placed on the charging stand. Not even the dead/empty battery sign. Left it there for a few hours and still now sign of life. Did a hard reset of the tablet and it came one and displayed a charge of 13%. That is after it was on the charging stand for atleast 3 - 4 hours which accounts for the little bit of charge it showed. Took all day to get full charged. Did not touch it until it was fully charged. I am going to do the same tonight i.e. reboot the tablet and set it aside. Will see what happens.
Anyone experience this with the Dec release of the ROM? I installed the Battery Monitor widget to see if I can figure out what is going on. Will share an update when I see a bit more information.
Click to expand...
Click to collapse
Despite other claims to the contrary, the Touchstone charger has always been funky for me. Try using the usb barrel charger.
shumash said:
Despite other claims to the contrary, the Touchstone charger has always been funky for me. Try using the usb barrel charger.
Click to expand...
Click to collapse
I will have to dig for it somewhere.....not sure if I have it anymore! I think I do, but not sure where it is.
I have been using the Touchstone charger for a couple of years now without problems......so, unless, we have an extraordinary coincidence, I would not think that is the problem. But again, strange things have happened......will post an update when I have figured out more clues.
awaraarawa said:
I will have to dig for it somewhere.....not sure if I have it anymore! I think I do, but not sure where it is.
I have been using the Touchstone charger for a couple of years now without problems......so, unless, we have an extraordinary coincidence, I would not think that is the problem. But again, strange things have happened......will post an update when I have figured out more clues.
Click to expand...
Click to collapse
The Barrel charger comes with the Touchstone you just need a decent usb lead.
sstar said:
The Barrel charger comes with the Touchstone you just need a decent usb lead.
Click to expand...
Click to collapse
Thanks, sstar, for the tip. Fortunately, I found the original charger cable and barrel. As I suspected, the issue was not with the Touchstone. I have charged with the barrel as well as the the Touchstone. I seem to have stabilized the issues with no more surprises. No more run down tablet with no charge left, no more blue tooth streaming issues. Have not played with the camera, etc. but that is not an active need for me.
Multi-user works well, device streams well, blue tooth works well, battery charges well (with the charger as well as Touchstone). All is well in PACROM land., atleast from where I sit at!
Open items from my end is the long boot time. As I mentioned earlier, the October release was a snap to boot/reboot. Less than a minute. This version takes almost 5 minutes - one minute of a blank screen followed by over 3 minutes of insert coin. I am sure there is a reason for this change and that smart folks are working to get this improved. I did notice that the boot sequence often fails and starts over once or twice before settling down to complete the full five minutes of startup.
Now to the mystery of what could have discharged the battery completely - I have no clues here. Atlease once, I did not see it complete the full boot sequence, so perhaps, it crashed during the boot sequence and bled the battery dry. Other times, I know it was a fresh boot that had completed fully. I have installed battery widget to monitor the battery charging/discharging and have noticed an anamoly atleast once which could be simply attributed to an application/measurement error. The widget reported a battery charge during the middle of the night when all creatures big and small in this home had gone to bed.....excepting the gremlins who volunteered to plug in the tablet for a charge for a brief moment!
Thanks to all of the good folks behind the PACMAN ROM. It is a wonderful and capable ROM and is an excellent demonstration of the community putting its best foot forward for the betterment of life! Thank you all again. Kudos and keep up the good work.:good::good::good::good::good:
awaraarawa said:
--SNIP--
Open items from my end is the long boot time.
--SNIP--
Click to expand...
Click to collapse
Probably not a ROM issue. With latest build, mine boots in 40-50 seconds. Don't know what your problem is, but sometimes it's a network issue. Turn off wifi, boot with it off, and see if the boot time improves. If not, you may need to go the complete clean and install via TP Toolbox.
Disable NavBar on HPTouchpad PACMAN Rom
Hey All,
I've installed PACMAN Rom KK RC-3 dev recently with kernel 3.4 and it works very well. Battery live is very good and everything works a bit smoother than with my old CM11.
I choosed PACMAN because there are a lot of customisations... so i liked to get rid of this navbar! Can't count how often i hit HOME instead of spaceon the virt keyboard.
i planned to enable pie on the bottom border left side.
Now i have trouble getting rid of the navbar. In the Past pacman had customisation oints for AOKP, paranoid settings now there's only PAC settings. After Googling i can't find these settings (maybe because these posts where from jan-jun and an earlier pacman version)
ROM control > navigation bar > menu location > don't show
Hybrid Properties --> Interface, under Workspace drag the slider for "Navigation Bar Size" to 0%
installed build: pac_tenderloin-userdebug4.4.4KTU84Qeng.shumash.20141201.130846 test-keys
Can someone point me to the correct settingspage or give me a hint?
Do i have to wait for a newer release?
Thanks a lot and keep up the good work, you've gained a follower for this ROM
[Q&A] [ROM][UNOFFICIAL][5.0.2][3.4 Kernel] CyanogenMod 12.0 Nightlies (tenderloin)
Q&A for [ROM][UNOFFICIAL][5.0.2][3.4 Kernel] CyanogenMod 12.0 Nightlies (tenderloin)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][UNOFFICIAL][5.0.2][3.4 Kernel] CyanogenMod 12.0 Nightlies (tenderloin). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
The 20150112 version has brought full Youtube functionality for me (can't say anything about Netflix, since I don't have an account). Great job!
Correction: YouTube only works up to 360p, anything higher than that will still fail.
I'm noticing a strange issue. I use an app that downloads movie. At seemingly random intervals while downloading, the wifi will tank completely. When opening settings-wifi, no wifi points are found and/or listed. Toggling does not help. So far, only a reboot gets it back. I have only had this occur while making a lengthy download. Small downloads, basic browsing (chrome, facebook..etc) have not as of yet been impacted. The timing is random, so i'll do what I can to get a logcat. Until then, has anyone else had this occur?
Superuser
Got it to work with - UPDATE-SuperSU-v2.40.zip - installed in TWRP.
spc2000 said:
Got it to work with - UPDATE-SuperSU-v2.40.zip - installed in TWRP.
Click to expand...
Click to collapse
It has root built-in. It's off by default now in CM, but you can turn it on in developer options.
---------- Post added at 09:05 PM ---------- Previous post was at 09:03 PM ----------
rebel1699 said:
I'm noticing a strange issue. I use an app that downloads movie. At seemingly random intervals while downloading, the wifi will tank completely. When opening settings-wifi, no wifi points are found and/or listed. Toggling does not help. So far, only a reboot gets it back. I have only had this occur while making a lengthy download. Small downloads, basic browsing (chrome, facebook..etc) have not as of yet been impacted. The timing is random, so i'll do what I can to get a logcat. Until then, has anyone else had this occur?
Click to expand...
Click to collapse
I haven't noticed that. Does toggling airplane mode work? That works on my phone when the WiFi toggle won't.
Sent from my SGH-I337 using XDA Free mobile app
Hearthstone using Evervolv 5 runs fine but this ROM won't handle a match without freezing mid-game, which is surprising considering how responsive everything else is.
How long to boot CM12 on Touchpad?
I saw a post that said "a LOOOOONG time". Can anyone provide me with an estimare as to how long I should wait before I consider the device hung, please? It's been almost half an hour. Thanx.
01/15 Build
Everything works fine. I can even see AC bandwidth and was able to connect. The only main issue that still not fixed is that it does not recognize all BT devices. It is also slow first time with most of the applications.
rebel1699 said:
I'm noticing a strange issue. I use an app that downloads movie. At seemingly random intervals while downloading, the wifi will tank completely. When opening settings-wifi, no wifi points are found and/or listed. Toggling does not help. So far, only a reboot gets it back. I have only had this occur while making a lengthy download. Small downloads, basic browsing (chrome, facebook..etc) have not as of yet been impacted. The timing is random, so i'll do what I can to get a logcat. Until then, has anyone else had this occur?
Click to expand...
Click to collapse
Dremnblest said:
I saw a post that said "a LOOOOONG time". Can anyone provide me with an estimare as to how long I should wait before I consider the device hung, please? It's been almost half an hour. Thanx.
Click to expand...
Click to collapse
Upto an hour depending how big your gapps package is or in my case 3 hours as I was also reinstalling 60 apps.
But you should be able follow the progress by connecting to play store and your apps to see what is being downloaded /installed.
[ROM][UNOFFICIAL][5.0.2][3.4 Kernel] CyanogenMod 12.0 Nightlies
How can i instal the new Lollipop 5.0.1 in my HP Touchpad. I downloaded al the pa.gapps.pico, FLITMAN, and Cyano 12. This is what i did.
I use the TPtool, complete data reset, and transfer the 3 files but i get an error message. How can i rezise the partition or how is the way to do it?
Do i need to add those 3 files in the Tpinstall folder and do a TWR recovery or wipe the data and install the OS with the new cyano 12?
Thank you
touchpad 4g
I have a Touchpad 4G model. Does this build work fine on it? I don't care about 4g data connections.. just wifi is good enough for me.
... considering that ART cache is way bigger than Dalvik cache (way bigger), and that our old TPs have very low eMMC performance, both sequential and random (iops), could it be that ART on the TP is/feels slower than Dalvik ?
daedric said:
... considering that ART cache is way bigger than Dalvik cache (way bigger), and that our old TPs have very low eMMC performance, both sequential and random (iops), could it be that ART on the TP is/feels slower than Dalvik ?
Click to expand...
Click to collapse
That may limit the benefits a bit but I still found ART on 4.4 quite a bit more responsive, and now 5.02 is just super smooth.
---------- Post added at 10:59 AM ---------- Previous post was at 10:47 AM ----------
Just wanted to say thanks, this rom gives the HPTP new life, if this had existed three months ago I wouldn't have bothered updating to a tab pro, and I have a feeling the tab pro and it's idiotic hardware navigation buttons is going to be gathering dust now.
My TP must not like LP then. First of all, games are slower here and there. Just a minor framerate drop, nonexistent on KK (Example, Motoheroz)
Then, the common stall, like TP is waiting....
At least for me, KK is still faster, and it's not placebo. It's the difference between a pleasant experience or a unpleasant one
First of all thanks for the great post.
I successfully installed the latest rom 31-01 but after a while it freezes and needs a factory reset.
Hello Team,
I have all over all a little bit a different feeling. Is it possible, that the kernel is the problem of buggy stuff? Why:
- I tried the cm11 with kernel 3.4, it was really instable.
- I tried cm12 with kernel 3.4. The same issues.
- On cm11 I go back to kernel 3.0 and cm11 by milaq, working quiet ok.
- The same with cm12. Milaq's Version is based on kernel 3.0 and it is running.
Can it be that the kernel 3.4 does not run on all HPTP?
Sent from my A0001 using XDA Free mobile app
launcher3 is always crashing...
i tried to create a logcat hope may be helpful...View attachment 3148279
View attachment 3148280
View attachment 3148281
With the 0207 build, it's not exactly crashing, but it is very choppy compared to the pre-0122 builds. Also, the graphic glitches in the lock screen and on Youtube in fullscreen mode are still there.
Hi, im using the lastest build, its working great, very stable. However, im facing a problem that is the time for charging battery is really long. It did not happen when I used the CM11 (4.4.4) build. The fact that I do not use the original charger. How can I fix this problem? Thank you.
This thread is for discussion of the Resurrection Remix build on the Exynos
The RR build is available for download here
After turning camera on for a few times this happens.
Also there's an icon for multiwindow in recently menu but it doesn't work and cannot be turned off, kind of bothers me.
Just wondering @dl12345 , so if we have any issues or we find a bug that related with RR but not lineage it won't get fixed, even if we provide logs? I'm kind of confused on how you phrased it when you said that you wouldn't deal with RR bugs but you would still update this after every lineage build release. Would the newer builds of RR that's based on the newer builds of lineage cause issues later on?
RetroSpect_17 said:
Just wondering @dl12345 , so if we have any issues or we find a bug that related with RR but not lineage it won't get fixed, even if we provide logs? I'm kind of confused on how you phrased it when you said that you wouldn't deal with RR bugs but you would still update this after every lineage build release. Would the newer builds of RR that's based on the newer builds of lineage cause issues later on?
Click to expand...
Click to collapse
I mean that if there is an RR specific bug then it won't get fixed until such times as the LineageOS build is fully stable. I'm already spending a lot of time getting the LineageOS build stable and I really don't have time to deal with two ROMs simultaneously. I released this RR build because quite a few people want it.
RR is based off LineageOS so actually compiling a build is not time consuming - I just point it to the same repository as my LineageOS build and tell it to build. This is why I am happy to release a RR build whenever I release a LineageOS build.
Thanks for this build, flashed now and all is working ok.
ROM faster and super smoothly.
In addition to the camera, which after some photos fails, there is the bug of the previous RR build, after a call all the audio are muted. Only rebooting or using Tasker to kill mediaserver after call audio work again.
Jc_Py said:
ROM faster and super smoothly.
In addition to the camera, which after some photos fails, there is the bug of the previous RR build, after a call all the audio are muted. Only rebooting or using Tasker to kill mediaserver after call audio work again.
Click to expand...
Click to collapse
You have any tips on how to use Tasker to kill media server after call?
DahakePL said:
You have any tips on how to use Tasker to kill media server after call?
Click to expand...
Click to collapse
This is my Tasker backup.
Install Tasker and restore this.
Basically Tasker will kill media server and play a beep after a call.
The run shell task must be root granted.
Jc_Py said:
ROM faster and super smoothly.
In addition to the camera, which after some photos fails, there is the bug of the previous RR build, after a call all the audio are muted. Only rebooting or using Tasker to kill mediaserver after call audio work again.
Click to expand...
Click to collapse
Try run /system/bin/unmute-call-audio after making a call.
This is the app I use to unmute the audio on boot up. Be interesting to see if it fixes the problem....
dl12345 said:
Try run /system/bin/unmute-call-audio after making a call.
This is the app I use to unmute the audio on boot up. Be interesting to see if it fixes the problem....
Click to expand...
Click to collapse
Only for testing, flashed ROM again and now after call audio works normally, without Tasker.
If the bug appears again I will try your suggestion.
Thanks
Has anyone noticed something with wrong with their accelerometer sensors? After awhile mine seems to stop working and don't change between the landscape and portrait modes.
I'll try to get logs for the next time it happens.
P.S. Do you guys have any suggestions for logging app for convenience?
webmanya said:
Has anyone noticed something with wrong with their accelerometer sensors? After awhile mine seems to stop working and don't change between the landscape and portrait modes.
I'll try to get logs for the next time it happens.
P.S. Do you guys have any suggestions for logging app for convenience?
Click to expand...
Click to collapse
From what I heard on the lineage thread try opening YouTube app and go back to the other application you were using. For some reason he said that it works.
RetroSpect_17 said:
From what I heard on the lineage thread try opening YouTube app and go back to the other application you were using. For some reason he said that it works.
Click to expand...
Click to collapse
Just do screen OFF/ON by power button and all works again...
Отправлено с моего SM-N910C через Tapatalk
best rom is ever used for n910c I think. Thank you so much for building this rom.
RetroSpect_17 said:
From what I heard on the lineage thread try opening YouTube app and go back to the other application you were using. For some reason he said that it works.
Click to expand...
Click to collapse
Yes this one works... But not always.
ukrbroker said:
Just do screen OFF/ON by power button and all works again...
Отправлено с моего SM-N910C через Tapatalk
Click to expand...
Click to collapse
I tried this but it doesn't work...
https://drive.google.com/open?id=1t3J78N0tqOMmQj2NDma6wf28MPPeryEh
If anyone is interested here's a RR boot animation which is normal sized since the one in the rom is really tiny (flashable)
I haven't find these mentioned yet but can someone confirm this isn't just me? Also I'm not sure if this is related to a WhatsApp bug or the ROM. Thanks in advance.
while you're using WhatsApp voice call it looks like screen closes but it continues to register touches even if you turn off the screen using the power button.
Also while listening to the voice messages of you cover the proximity sensor it turns off the screen and stops the playing message.
Hi guys, can I flash the stock Android 6.0 over this, or will it brick my phone?
I have TWRP and rooted with Magisk
thanks
Any way to fix the system apps keeps crashing? only factory reset solves the problem but after 1 hour the problem occurs but on different system app.
example
stock email app
Keeps closing when opening a mail
after factory reset
email works
contacts closing
email closing