Database Develop

[GUIDE] How To Fix Rebooting After Normal Update Or Reinstalling Stock Firmware

We all know about this trauma while reinstall the stock firmware or doing normal update to our phone, also we've try a lot of guides on Google and no one it's work? no problems, in this final solution I'll help you how to get device restores with worked baseband and no rebooting anymore, just sit, read carefully and apply the steps.
P.S.: if there're any similar guide feel free to remove it, I'm not sure about that.
Requirements:
TWRP 3.0.2 ( I use the one from Honor 4C which contain the option to wipe Cust partition).
Single Sim unbrick files or.
Dual Sim unbrick files. (to download the correct firmware for your variant just check Chapter 4: Unbricking.
Unlocked bootloader (you know how to do that).
Fastboot tools that you'll find inside unbrick files roms.
Balong patch: check attached files, put into phone memory in a folder called dload and flash via Local Update (do this step ONLY after flash the firmware and see BalongV100R001C50B311 or similar)
Compatible Roms:
Emui 3.1 both single and dual sim.
Emui 4.0 not tested yet, but should work.
Same thing for OTA update, in case of getting problems just download the full rom and extract
the cust partition of same installed ota version then follow steps solve reboot problems
Steps
Once the firmware is booted fine, you'll see the stock aosp background and missed applications and features which is gone, that's mean the cust partition is not flashed at 100%, here how to fix the problem.
Download the TWRP of Honor 4C (don't worry they are similar phone, tested by myself).
Rename the image to twrp.img and pust inside fastboot folder, reboot phone into fastboot mode and run fastboot flash recovery twrp.img .
Reboot into recovery, click on Wipe then choose ONLY Cust partition.
Reboot to Bootloader from Reboot menu inside recovery.
All you have to do is reflashing cust image by fastboot flash cust cust.img .
IF you see signal of sim and it operator name, your device and missed apps or features has been fixed and restored as well.
IF you see Balong bug in "Build Number" in about setting, just flash the update.app that you have to put it inside dload folder and download from attached files to resolve the problem, if you see this tutorial is helped you, just hit thank

[How To Root] [EMUI 5+EMUI 8]+[KangVip Rom V.1.1] Huawei P8 lite 2017 PRA (Prague)

​​​​​[How To Root]
[2017 Family] Huawei/ Honor series PRA (Prague)
-Android 7.0 -EMUI 5.0
P8 Lite 2017 - PRA-LX1, LX2, LX3, LA-1
P9 Lite 20176
NovaLite
Honor 8 Youth
Rooting has been developed and tested on this device:
Huawei P8 lite 2017 [PRAGUE]
Model number: PRA-LX1
Build number: PRA-LX1C432B170
Free device
You need:
- PC or Windows tablet
- USB cable
- Windows 7 / 8.1 / 10
- Minimal Adb and Fastboot
- OEM unlocking in the developer options active
- Huawei HiSuite (installs all necessary drivers)
OEM and FRP unlocked
Bootloader unlocking:
- Go to this page: Homepage - EMUI - on UNLOCK (Currently offline.),
- then on Account login - and log in with the Huawei ID.
- Then confirm the terms and conditions.
- On the next page, fill in the form. This page is self-explanatory.
- Confirm your entries with "Commit". The unlock code is now displayed immediately.
- Please note down immediately.
- Now start the PRA in fastboot mode and enter fastboot oem unlock in the Adb command window (PC)
- followed by your unlock code. (like this: fastboot oem unlock 123456787890987654)
- Now comes a hint screen, in which the unlocking is pointed out.
- You now have the option to cancel this action. If you confirm with yes, it will be unlocked and a
- Factoryreset will be performed.
FRP - Unlocking:
- After the reboot has just been executed, the device starts the new setup.
- Reject or skip anything related to security and Google. Can be made up later.
- After setup, turn on OEM unlock and USB debugging in the developer settings and boot back into Fastboot mode.
- It should be there now: FRP Unlock
Rooting:
The following is required:
TWRP recovery (prague311.img)
-in the ADB directory
SuperSU2.82-EMUI5-dm-verityPermissive.zip
(By @Tecalote)
-to the Ext Sd
Backup your data using Huawei Backup.
Please enter only flash commands by using Adb.
Reboots only by keyboard combination.
Installing TWRP:
Connect the device via USB to the PC and start into the boot loader
(Fastboot Mode):
Now start adb on the PC and enter it in the terminal:
fastboot flash recovery prague311.img
Disconnect device from PC and start TWRP: Press Vol + and Power and hold both.
When signs or logo appears on the screen, release the buttons.
After a few seconds TWRP starts.
There the SuperSU2.82-EMUI5-dm-verityPermissive.zip flash
and reboot.
The device starts twice before it finally boots.
Then load from the Playstore the Busybox.apk from Stericson
and thus install Busybox into this path:
/ Su / Xbin
In the future:
All actions in TWRP must be executed wisely.
Learn about the features of this custom recovery.
Note:
The data partition is mountable in TWRP,
but is not reliably secured or restored.
Therefore, never delete the internal memory and data partition,
or perform a factory reset. I have had the experience that too.
Other partition backups will never be restored as they are
were created. A perfect restoring is not possible.
Please do not use TWRP for backup and restore operations.
If a backup or restore should be done, please always without the data partition.
Apply a factory reset only in stock recovery.
This can be done with a regular backup per Huawei data backup.
Button combinations:
Fastboot Mode: Vol.- and Power with PC connection
Recovery: Vol. + and Power without PC connection
eRecovery: Vol. + and Power with PC connection
All system reboots always without PC connection.
Without PC connection means that the cable from the PRA
is separated, only from the PC is not sufficient.
I wish you success!
Root the PRA is now also available with the Magisk-v13./16.
Requirement:
- Firmware from the B164
- not root
Who has already rooted with SuperSu, lets
everything as it is.
Magisk Rooting:
- Install MagiskManager-v5.3.0.apk
- flash Magisk-v14.0.zip by TWRP
- flash BusyBox-Magisk-1.25.zip by TWRP
- reboot and update the MagiskManager.
For this we thank the Magisk developer
@topjohnwu.
[How to unbrick]
The procedure of rescue is risky.
Without appropriate knowledge, I advise.
It is only successful if the instructions are executed exactly.
This TWRP backup rom is not suitable for normal use. It was created for the following purpose:
- Rescue of bricked phones.
- Force an OTA update.
Do not root this rom!
Unzip the download 2017-08-11-RESCUE.ROM.PRA.OTA.B164.to.170.rar (1.05 GB).
This creates the TWRP backup:
2017-08-11-RESCUE.ROM.PRA.OTA.B164.to.170
installation:​
copy my backup to the TWRP backup path to the Ext Sd.
(see screenshot)
Boot into the Bootloader.
Stock Recovery flash by adb.
In the recovery start and
perform a factory reset.
Boot into the Bootloader.
TWRP flash by adb.
To start TWRP.
There data wipe
and restore my backup.
In the Bootloader start and
flash by adb the Stock Recovery.
There then again a factory reset.
Reboot
When the boot process is finished,
Go to Settings> Update program> New version> Update.
Will not be offered, in the Stock Recovery again perform a factory reset.
The upgrade to the B170 succeeds only with sim-card.
You have now done an official update and a new, clean and up-to-date firmware.
Congratulation!
Thread Update: 2017-11-10
There is also an alternative method. This can work, but it doesn't have to.
Starts the device into eRecovery and tries to recover and download the firmware.
If you had the B170, this one will also be sent to you here offered.
If it works, then immediately starts the download and installation.
Thread update: 2017-12-09
[Rooting B182]
With SuperUser:
After the update to the B182
surely TWRP already flashed
and created a backup.
Now installed in TWRP, on the Stock Kernel,
the "SuperSU-v2.82. PRA. B182. zip"
from the appendix.
Reboot and ready.
You can use the Busybox from the App
suggested path.
With Magisk:
As described above.
Nothing's changed.
Threadupdate: 2017-12-30
Here's the new rescue rom:
https://forum.xda-developers.com/p8...ck-rom-huawei-prague-pra-xxxc432b182-t3727816
Threadupdate: 2018-01-04
Here I have a new possibility to restore a bricked device:
It's an original Huawei UPDATE.APP.
It is designed for emergencies to repair damaged firmware.
However, some functions are limited until the next OTA Update.
The Magazine-Unlocking does not work and other themes cannot be activated.
TWRP backup and restore are faulty and can lead to a brick.
Don't use dual recovery here. eRecovery is mandatory.
After downloading the UPDATE. ZIP you unpack the archive.
Now create the folder dload on the ExtSd
and copies the resulting UPDATE.APP there.
Now in the dialer with the input of *#*#2846579#*#*
call up the secret menu and perform the update. If you can't boot anymore, you start
the update as follows, without USB connection:
Vol. + and vol. - and power and press together and hold on tight. The device goes off and on again.
As soon as text appears on the display, release all keys. Now start after the update process within a few seconds.
After this update the firmware should be repaired.
TWRP and root do not need to be removed as they are overwritten during the update.
The FRP is then locked again.
After the first reboot go to recovery and make a factoryreset and reboot again.
Now disable in the developer options the oem unlocking und your device is full stock wihout the bootscreen: "your device has been unlocked and can't be trusted". If you need twrp and root again, unlock with the huawei unlockcode.
Good luck.
And now we install the OREO-Beta:
Download:
LX1C432B321-PRA log (8.0.0.321)
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2312/g1699/v130567/f1/full/update.zip
Instructions:
The UPDATE.ZIP from the download, nocheck.img and Magisk-v16.0.zip copy to the extSd card.
Perform a HW backup
Sync your Google Account.
Write down Google Login data.
Enable OEM unlocking and USB debugging.
Perform a factoryreset. (Stock Recovery)
Now carry out a short new setup.
Reject everything for security and google, or skip it.
Can be made up later.
Reactivate OEM unlock and USB debugging.
Now flash TWRP. (prague311.img)
Then install nocheck.img into the recovery partition with TWRP.
This is a stock recovery that bypasses the UPDATE.ZIP check and makes it
so that it can be installed.
Now enter the following command in the TWRP terminal:
echo -update_package=/sdcard/update.zip > /cache/recovery/command
Please follow the exact spelling!
Then enter in the terminal: reboot recovery.
The device now boots into the recovery and installs the UPDATE.ZIP.
That'll take a while. Afterwards you boot directly to OREO.
Congratulations!
I've been using OREO for a few hours now and haven't found any bugs yet. They are of course
as it is probably a beta version.
The settings still contain the same firmware entry,
as before installation. I don't know why that is. But it is
actually the EMUI 8 firmware with Google patch from 01.04.2018.
A test of the eRecovery recovery revealed that there the rollback of
EMUI 8 on 5 is offered. I promptly tested it successfully.
Rooting:
Install the OREO TWRP via ADB. (FIGO4.img)
fastboot flash recovery_ramdisk figo4.img
Install the Magisk-v16.zip there.
After rebooting the Magisk Manager app and check the root.
To what extent an update capability to the following firmware exists,
is unfortunately beyond my knowledge and remains to be seen.
Have fun with OREO.
One more comment on the new TWRP:
The TWRP comes from my P smart and is compatible.
More partitions can be backed up there than used to be the case.
However, restoring carries unpredictable risks/results.
Please select only the following partitions for backups in the future:
kernel
Boot Ramdisk
Recovery Ramdisk
System
The data partition can only be backed up after a previous formatting.
You will to get back to EMUI 5:
Starts the eRecovery. There will be a rollback for EMUI 5, at the latest after a Factoryreset.
And now for the final:
[OREO-Custom Rom] Huawei P8 lite 2017 - PRA-LX1 -
K-Rom V.1.1 - EMUI 8, Android 8
On TWRP backup basis:
Developed and tested on this device:
Huawei P8 lite 2017 (Prague)
Model Number: Huawei PRA-LX1
Build Number: FIG-LX1 8.0.0.0.046(C432)
free device, without branding, with root and
TWRP recovery
The OREO beta from this thread is required:
Huawei P8 lite 2017 - PRA-LX1C432B321(8.0.0.321) - EMUI 8/ Android 8 - OREO
Mods:
Call Recorder and KangVip Advanced Settings
It is based on the official Asia-B046 and KangVip version for the Honor V10 (BKL)
Quick guide for experienced users:
Please make a TWRP backup of these partitions,
separately: Kernel, Boot Ramdisk, Recovery Ramdisk and System.
It serves to restore the old system, if you don't like this Rom.
The Rom will be installed as if you were restoring a TWRP backup.
wanted to. All your apps will be preserved.
Further requirements:
TWRP Recovery,
Root is not necessary,
OEM and FRP unlocked,
USB debugging on.
You are familiar with the subject? Then let's go!
A Unroot is not necessary.
Preparation:
Your device must be fully equipped. Including all accounts and apps.
Synchronize the accounts as usual. Especially the Google Account.
Perform a backup with the Huawei data backup.
Remove the device pin, Sim Pin, Face Unlock and the fingerprint.
Installation:
Download: 2018-04-22-PRA-OREO-K-ROM-V1.1.exe
Run this self-extracting archive on the PC.
This creates a TWRP backup folder.
Copy to the TWRP backup directory on extSd.
Restore the backup completely and reboot it into the system.
Do not wipe before and after restoring.
The installation is now complete.
Xposed is not perfectly compatible yet and I will send it later. The system has root
with Magisk. Therefore the existing SuperSu app has to be deleted.
Do not use "hide NavBar" in the Kangvip Advanced Settings, as it only works in China Roms.
Hiding the NavBar is integrated in the EMUI 8.
In the K-Advanced Settings / tune cpu, some changes of the Cpu power are possible. Anyone who
Power needed, can do that. Testing the "Save" options is useless. I tested it extensively.
The in-house Huawei energy saving settings are unbeatable. The Advanced Settings
I will not describe in more detail here, as these are very extensive. Most settings can be set to
the screenshots. On these it can also be seen that I have already been
I've made some design changes. See Notification Bar, Desktop and Appdrawer.
Good luck!
Downloads:*
https://mega.nz/#F!3SwSFIgK!VvtbxPWV2PssIxoHQf556g
[Team HRC]
The Rom I offer is original Huawei firmware. Modified by Kangvip and reworked by me.
If you like this work, you can make a donation to Kangvip: 志康 黄 Send money with PayPal.Me
Not for me, because I don't take money for it. I made this Rom for my purposes.
I love it when these things work. And it does. Now I share it with you.
Here is the link to the original and the developer: 微博正文 - 版版
Many thanks to:
KangVIP - Rom
topjohnwu - Magisk
@Tecalote - SuperSU
Chainfire - SuperSu
Stephen (Stericson) - Busybox
TeamWinRecoveryProject - TWRP
Huawei Technologies Co, Ltd. 华为技术有限公司
WARNING !
If all this has worked on my device, it does not mean that it goes with everyone else. Follow exactly the instructions to prevent damage. The execution is your risk.
Never make a factory reset in TWRP. Brick !!! Wipes only in stock recovery.
Tipp:
The current bricks were mostly caused by TWRP. The Data Partition is missing or corrupted. This is done by TWRP, which still generates errors. There is still no TWRP that works properly. Directly after a new update usually goes everything. But at the latest after the rooting come the problems. Then you can not edit the data partition anymore. No backup and no restoration of data partition.
NOTE: Despite careful preparation I can not guarantee that through the implementation of this Guidance does not create damage to the device or operating system, and therefore assume no liability for ensuing damage and malfunction of hardware and software! If you are still unsure, follow these steps: Only perform the procedure if any mentioned conditions (model number, Android version, etc.) apply to you or your device. Read the instructions carefully and completely, check unfamiliar terminology by google or xda. Downloaded files check for viruses. A backup of important settings and data make. The instructions do not perform, if you do not know what you're doing.
These warnings must be, that is logical. In the end, I have experienced this: For testing, I have seven times a complete backup and can also restore. TWRP worked wonderfully now. When I then restored an older backup, the old error came back.
TWRP works correctly: Before the first restoring first in the stock recovery make a factoryreset. Then also in TWRP and there data wipe. Then restore the backup. All goes well. All older backups I have deleted.
This project is finished. There are no more downloads available.

I appreciate the work of @G.Man. He tested every possible situation with this Phone to find the best way how to Root it despite the limitations of EMUI 5.0!
He wasn't afraid to bring his phone three or more times nearly to a brick just in the hope to find a possible Root Solution for us, which works pretty much good
Many thanks at this point. Without his testing and work we would not be able to get Root Rights on this Phone with newest SuperSU

I bought this phone (pra-lx1) yesterday and i check at the settings that my build number is NRD90M test-keys and i don't have the system update option available and some other stuff(like file manager).
How is this possible on a brand new device??? Is there something i can do without losing warranty?

alimentas said:
I bought this phone (pra-lx1) yesterday and i check at the settings that my build number is NRD90M test-keys and i don't have the system update option available and some other stuff(like file manager).
How is this possible on a brand new device??? Is there something i can do without losing warranty?
Click to expand...
Click to collapse
Seriously ? You got a model test then can you show a screen shot ?, I think it would be better to change it

Test model??? Really??
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Hello, i'm trying to unlock my bootlader, i have my unlocking password from huawei and when i type adb devices i get my device, then i boot into fastmode but when i type fastbbot oem unlock followed by my unlocking code it replies FAILED (remote: Command not allowed)
on the lower part on the fastboot mode it's written phone locked and frp lock : what does FRP Lock mean ?

alimentas said:
Test model??? Really??
Click to expand...
Click to collapse
That's not a test model, your oeminfo partition doesn't match the installed firmware. Is yours an operator bought one? or did you buy it unlocked?

randhackr said:
That's not a test model, your oeminfo partition doesn't match the installed firmware. Is yours an operator bought one? or did you buy it unlocked?
Click to expand...
Click to collapse
Οperator bought one.I just bought it ''factory sealed''.I am fron Greece and this was supposed to be by the place i bought it,αn unbranded EU device.
Is there is something i can do or i change it with a new one????

alimentas said:
Οperator bought one.I just bought it ''factory sealed''.I am fron Greece and this was supposed to be by the place i bought it,αn unbranded EU device.
Is there is something i can do or i change it with a new one????
Click to expand...
Click to collapse
Dial *#*#2846579#*#* (this opens project menu), select Network information Query and vendor country info a report back what you've got there.

i've succeeded unlocking my bootloader, i had to go to developer mode enable oem unlock then retry fastboot mode then it worked.

harlock59 said:
i've succeeded unlocking my bootloader, i had to go to developer mode enable oem unlock then retry fastboot mode then it worked.
Click to expand...
Click to collapse
Yes you need to enable the oem unlock option to disable the frp lock.
Is your phone not branded to any operator? If it is not could you use the twrp that is used for the rooting process to dump the oeminfo partition of your phone?

randhackr said:
Dial *#*#2846579#*#* (this opens project menu), select Network information Query and vendor country info a report back what you've got there.
Click to expand...
Click to collapse
That 's what i got.
Vendor:hw
Country:eu

alimentas said:
That 's what i got.
Vendor:hw
Country:eu
Click to expand...
Click to collapse
That's strange. You seem to have a stock oeminfo. You could try o use the firmware finder in the playstore to try to update your phone to the b118 firmware. You should have something like the screenshot that I uploaded.

i didn't understand what i had to do after unlocking bootloader, i have RootBoxLX1.rar but i don't know how to use it, i've unrared it but what should i do to make them work ?

harlock59 said:
i didn't understand what i had to do after unlocking bootloader, i have RootBoxLX1.rar but i don't know how to use it, i've unrared it but what should i do to make them work ?
Click to expand...
Click to collapse
I only installed twrp, but as far as I understand you must use fastboot to flash the modified boot.img provided in the rar file.

randhackr said:
I only installed twrp, but as far as I understand you must use fastboot to flash the modified boot.img provided in the rar file.
Click to expand...
Click to collapse
how can i install twrp and where can i find twrp for huawei pra-lx1or what is the command line to flash the modified boot.img ?
---------- Post added at 05:36 PM ---------- Previous post was at 05:32 PM ----------
isn't there a mistype (mis spelling) fastboot flash boat boot_root.img shouldn't it be fastboot flash boot boot_root.img ???

harlock59 said:
how can i install twrp and where can i find twrp for huawei pra-lx1or what is the command line to flash the modified boot.img ?
---------- Post added at 05:36 PM ---------- Previous post was at 05:32 PM ----------
isn't there a mistype (mis spelling) fastboot flash boat boot_root.img shouldn't it be fastboot flash boot boot_root.img ???
Click to expand...
Click to collapse
Check this post https://forum.xda-developers.com/showpost.php?p=71601405&postcount=62
Edit: Yes there is a misspelling it should be boot

harlock59 said:
i didn't understand what i had to do after unlocking bootloader, i have RootBoxLX1.rar but i don't know how to use it, i've unrared it but what should i do to make them work ?
Click to expand...
Click to collapse
Extract RootBoxLX1.rar, gets so all necessary files. Then work the Root instructions. TWRP may not be on the device separate the original Recovery.

I have changed the write errors boat to boot.
Sorry

randhackr said:
Check this post https://forum.xda-developers.com/showpost.php?p=71601405&postcount=62
Edit: Yes there is a misspelling it should be boot
Click to expand...
Click to collapse
thanks, that helped !

Huawei p8 lite 2017 FULL BRICKED

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Forgive me for my english)
Hello everyone....I'm not here asking somebody to help me, I don't think you could. I'm here to advice you not to root a Huawei P8 lite 2017. The story of me bricking this phone is long, I've done lots of passages that I can't remember.
I've read guides, asked help and compared softwares before trying to root my phone, but it has been useless.
I'll explain the main problems occured.
I've unlocked bootloader and then I flashed with fastboot tim win recovery..the version is located in this section about huawei p8 lite 2017. TWRP couldn't backup Data partition, it gave me an error that I couldn't avoid: I think that version is not full compatible with this phone. STOP rooting your phone if you can't backup a partition or if the recovery starts giving you error.
I flashed MagiskSu rootless with twrp. Initially worked properly, (but not all softwares were working with it)...after trying to install viper4android, my OS corrupted...Launcher didn't started anymore when I turned up my phone...I could only see the background and go in settings app....I restored my phone with twrp but it had been useless...I had to format data partition. After that, my phone restored properly.
I was having problem with booting into system...it took every time 66 seconds, and I had only few modules installed. Something were wrong. I installed Apps2sd, but it gave me some problems...sometimes was not able to mount partition or to write the script. Then I did the wrost choice of my life. I allowed this app to edit System partition. All the phone corrupted. I was not able to boot into system after reboot. DON'T ALLOW SOFTWARES TO EDIT SYSTEM PARTITION. Then i restored the phone with twrp, but after this, my phone was damaged: No Audio, No microphone, NO camera working, I couldn't play any video or song....it was corrupted. I've tryed to restore system partition, vendor partition, boot image....everything was useless. I flashed the stock recovery and did factory reset...nothing. I flashed stock boot.img...nothing was working.
I've tryed last chace, to flash all stock rom with adb sideload: adb failed. I tryed with fastboot: failed. I at least tryed to flash manually system, vendor, boot and recovery partition with fastboot....but It ended with my phone totally bricked (I think Fastboot didn't worked properly, it gave me some errors). I had wiped all the partition before doing this...but something tell me that fastboot didn't flashed correctly stock partition.
The only thing that is left in my phone is eRecovery, I can't use usb debug, Third parts can not communicate with the phone. I can only reboot, shutdown, and try to download the "lastest version" from server...but it fails at every try. My phone is not accessible anymore.
My advice is NOT TO ROOT HUAWEI P8 LITE 2017. Wait for developers to create advanced software more compatible with this new device.
Now I want to ask help: is there something I can do right now? Why doesn't erecovery work? Is there something I can do with Huawei Support? I have to sent my phone to restore it?

Hey bro...if your phone's bootloader is unlocked as you said...
You can do those easy steps
Download HUAWEI UPDATE EXTRACTOR 9.9.3
Use it to extract the following partitions
System.img
Recovery.img
Boot.img
And other files that you need and copy them into adb.exe folder
Then boot your phone into bootloader
And then use those commands to flash the partitions
fastboot flash system system.img
And
Fastboot flash boot boot.img
And
fastboot flash recovery recovery.img
The flashing process will take a while on system partition
And then do a factory reset using stock recovery
And then the phone should boot up
Sent from my PRA-LA1 using Tapatalk

0000729399 said:
(Forgive me for my english)
Hello everyone....I'm not here asking somebody to help me, I don't think you could. I'm here to advice you not to root a Huawei P8 lite 2017. The story of me bricking this phone is long, I've done lots of passages that I can't remember.
I've read guides, asked help and compared softwares before trying to root my phone, but it has been useless.
I'll explain the main problems occured.
I've unlocked bootloader and then I flashed with fastboot tim win recovery..the version is located in this section about huawei p8 lite 2017. TWRP couldn't backup Data partition, it gave me an error that I couldn't avoid: I think that version is not full compatible with this phone. STOP rooting your phone if you can't backup a partition or if the recovery starts giving you error.
I flashed MagiskSu rootless with twrp. Initially worked properly, (but not all softwares were working with it)...after trying to install viper4android, my OS corrupted...Launcher didn't started anymore when I turned up my phone...I could only see the background and go in settings app....I restored my phone with twrp but it had been useless...I had to format data partition. After that, my phone restored properly.
I was having problem with booting into system...it took every time 66 seconds, and I had only few modules installed. Something were wrong. I installed Apps2sd, but it gave me some problems...sometimes was not able to mount partition or to write the script. Then I did the wrost choice of my life. I allowed this app to edit System partition. All the phone corrupted. I was not able to boot into system after reboot. DON'T ALLOW SOFTWARES TO EDIT SYSTEM PARTITION. Then i restored the phone with twrp, but after this, my phone was damaged: No Audio, No microphone, NO camera working, I couldn't play any video or song....it was corrupted. I've tryed to restore system partition, vendor partition, boot image....everything was useless. I flashed the stock recovery and did factory reset...nothing. I flashed stock boot.img...nothing was working.
I've tryed last chace, to flash all stock rom with adb sideload: adb failed. I tryed with fastboot: failed. I at least tryed to flash manually system, vendor, boot and recovery partition with fastboot....but It ended with my phone totally bricked (I think Fastboot didn't worked properly, it gave me some errors). I had wiped all the partition before doing this...but something tell me that fastboot didn't flashed correctly stock partition.
The only thing that is left in my phone is eRecovery, I can't use usb debug, Third parts can not communicate with the phone. I can only reboot, shutdown, and try to download the "lastest version" from server...but it fails at every try. My phone is not accessible anymore.
My advice is NOT TO ROOT HUAWEI P8 LITE 2017. Wait for developers to create advanced software more compatible with this new device.
Now I want to ask help: is there something I can do right now? Why doesn't erecovery work? Is there something I can do with Huawei Support? I have to sent my phone to restore it?
Click to expand...
Click to collapse
Flash Huawei ROM with keys.
First search for rollback ROM and flash it then flash full rom.
.

hamzio7 said:
Hey bro...if your phone's bootloader is unlocked as you said...
You can do those easy steps
Download HUAWEI UPDATE EXTRACTOR 9.9.3
Use it to extract the following partitions
System.img
Recovery.img
Boot.img
And other files that you need and copy them into adb.exe folder
Then boot your phone into bootloader
And then use those commands to flash the partitions
fastboot flash system system.img
And
Fastboot flash boot boot.img
And
fastboot flash recovery recovery.img
The flashing process will take a while on system partition
And then do a factory reset using stock recovery
And then the phone should boot up
Sent from my PRA-LA1 using Tapatalk
Click to expand...
Click to collapse
Thank you but I've already done this passages when my phone were soft-bricked. It could have helped me, but now the problem is bigger: any partition is corrupted, there's no way I can go into bootloader, and there's no way I can interact with my phone form a pc

persona78 said:
Flash Huawei ROM with keys.
First search for rollback ROM and flash it then flash full rom.
.
Click to expand...
Click to collapse
I can't flash anything since my phone can not interact with any machine...there's no more recovery partition working, no more system partition working...boot image is ok but I can't boot anything. Fastboot mode works only if system partition works too.

0000729399 said:
I can't flash anything since my phone can not interact with any machine...there's no more recovery partition working, no more system partition working...boot image is ok but I can't boot anything. Fastboot mode works only if system partition works too.
Click to expand...
Click to collapse
Yes, you can recover your device because erecovery is working !
You need a MicroSD card, create a folder/directory named "dload" and inside put the UPDATE.APP ( full firmware for your device ) . Put the MicroSD card into your device and keep pressing at the same time all three hardware buttons ( volume +, volume - and power ) ... your device will start automaticly to install UPDATE.APP - if UPDATE.APP is compatible 100% with your device !
Good luck !

surdu_petru said:
Yes, you can recover your device because erecovery is working !
You need a MicroSD card, create a folder/directory named "dload" and inside put the UPDATE.APP ( full firmware for your device ) . Put the MicroSD card into your device and keep pressing at the same time all three hardware buttons ( volume +, volume - and power ) ... your device will start automaticly to install UPDATE.APP - if UPDATE.APP is compatible 100% with your device !
Good luck !
Click to expand...
Click to collapse
Thank you...I tryied, but didn't work...it says "restore failed"...maybe the UPDATE.APP is not full compatible with my phone. If anybody can give me the update.zip of Huawei P8 lite 2017 PRA-LX1 TIM BRAND (PRA-LX1C55B105), I'm here awaiting for it.
Could I try to flash a No Brand Firmware from dload folder?
Another question to you..could I have done something bad that doesn't allow erecovery to work properly? I didn't touch that partition.

Ok I've done researches and I realized that the firmware of my phone doesn't exist yet. The one I tryed to flash has a very similiar build code but it's different., I noticed it right now, I'm not surprised my phone is dead. I can only wait for developers to put that one on internet.
Or I can try to install from dload folder another firmware that is compatible with my phone...If anybody know something about it, tell me please :/

0000729399 said:
Thank you...I tryied, but didn't work...it says "restore failed"...maybe the UPDATE.APP is not full compatible with my phone. If anybody can give me the update.zip of Huawei P8 lite 2017 PRA-LX1 TIM BRAND (PRA-LX1C55B105), I'm here awaiting for it.
Could I try to flash a No Brand Firmware from dload folder?
Another question to you..could I have done something bad that doesn't allow erecovery to work properly? I didn't touch that partition.
Click to expand...
Click to collapse
Yes, "restore failed !" is because firmware not match 100% your device !

0000729399 said:
Ok I've done researches and I realized that the firmware of my phone doesn't exist yet. The one I tryed to flash has a very similiar build code but it's different., I noticed it right now, I'm not surprised my phone is dead. I can only wait for developers to put that one on internet.
Or I can try to install from dload folder another firmware that is compatible with my phone...If anybody know something about it, tell me please :/
Click to expand...
Click to collapse
I found PRA-LX1C55B120 in firmware finder.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1458/g104/v82870/f1/full/update.zip
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146

dominj97 said:
I found PRA-LX1C55B120 in firmware finder.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1458/g104/v82870/f1/full/update.zip
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
Click to expand...
Click to collapse
oh my god, do you know if is it trustable? Do you know if somebody has tryed it? I'm gonna try it right now.

dominj97 said:
I found PRA-LX1C55B120 in firmware finder.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1458/g104/v82870/f1/full/update.zip
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
Click to expand...
Click to collapse
Restore Failed....Again.
Maybe the file you gave me is not the right one, or maybe my phone is not able to restore a phone starting from an updated Firmware like the b120 verision...maybe eRecovery wants the stock version, the b105.
I always do this things: I extract all the contents of update.zip in a folder named "dload" on a SD card...then I put the card into my phone and launch eRecovery. I hope I'm not missing any passage.
Does anybody know is eRecovery needs the stock update of the Firmware to restore it?
Could anybody find the PRA-LX1C55B105 (TIM BRAND = C55) Firmware?

0000729399 said:
Restore Failed....Again.
Maybe the file you gave me is not the right one, or maybe my phone is not able to restore a phone starting from an updated Firmware like the b120 verision...maybe eRecovery wants the stock version, the b105.
I always do this things: I extract all the contents of update.zip in a folder named "dload" on a SD card...then I put the card into my phone and launch eRecovery. I hope I'm not missing any passage.
Does anybody know is eRecovery needs the stock update of the Firmware to restore it?
Could anybody find the PRA-LX1C55B105 (TIM BRAND = C55) Firmware?
Click to expand...
Click to collapse
That firmware is impossible to find. Maybe because it is Tim branded. But don't worry you can flash any firmware, no branded too. You can try as I done the last week, to flash with fastboot system, boot and recovery. These images are present in the update.app of the PRA-LX1C432B110, and you can use huawei update extractor to get that images. Good luck my friend!

Manuele1000 said:
That firmware is impossible to find. Maybe because it is Tim branded. But don't worry you can flash any firmware, no branded too. You can try as I done the last week, to flash with fastboot system, boot and recovery. These images are present in the update.app of the PRA-LX1C432B110, and you can use huawei update extractor to get that images. Good luck my friend!
Click to expand...
Click to collapse
I can't flash anything because my phone is bricked...I can only use eRecovery, and I can not comunicate with my phone with a computer. I have to wait for somebody to extract the Firmware or I don't know.
I've already done the passage you wrote, to flash boot and recovey, when my phone was corrupted but NOT bricked. I restored my phone but it didn't solved issues I was having. Now I can't do anything. I can only use eRecovery.

I am not advising or telling that it would be a good idea, but you could try to install the TWRP-Recovery using the prague.img from the "[How To Root] Huawei P8 lite 2017 [PRA-LX1]-Android 7.0-EMUI 5.0" and if it success then trying to restore the PRA-LX1C432B100 firmare which can be found on "[Request] PRA-LX1 C432 oeminfo".
CAUTION: If you succeed you'll have the two SIM version of the firmware and all info of your original firmware will be lost which means that your warranty will definitely be void (it most likely is already).

jtvu said:
I am not advising or telling that it would be a good idea, but you could try to install the TWRP-Recovery using the prague.img from the "[How To Root] Huawei P8 lite 2017 [PRA-LX1]-Android 7.0-EMUI 5.0" and if it success then trying to restore the PRA-LX1C432B100 firmare which can be found on "[Request] PRA-LX1 C432 oeminfo".
CAUTION: If you succeed you'll have the two SIM version of the firmware and all info of your original firmware will be lost which means that your warranty will definitely be void (it most likely is already).
Click to expand...
Click to collapse
Thank you too...but It's the million time I say: I CAN'T FLASH ANYTHING BECAUSE MY PHONE IS TOTALLY BRICKED.
My phone is totally corrupted, the only thing I can do is to use eRecovery. Every other solution dealing with using PC to do things on phone has been tryied when the phone were SOFT BRICKED, and doesn't work anymore because the phone is at 90% HARD BRICKED.

0000729399 said:
Thank you too...but It's the million time I say: I CAN'T FLASH ANYTHING BECAUSE MY PHONE IS TOTALLY BRICKED.
My phone is totally corrupted, the only thing I can do is to use eRecovery. Every other solution dealing with using PC to do things on phone has been tryied when the phone were SOFT BRICKED, and doesn't work anymore because the phone is at 90% HARD BRICKED.
Click to expand...
Click to collapse
Are you saying that you can't go to fastboot too? Or if you can, it gives you error to every flash? But don't worry, if you can use erecovery, try This: You'll notice that you have to pay for this. Good Luck!
https://funkyhuawei.club/register

Manuele1000 said:
Are you saying that you can't go to fastboot too? Or if you can, it gives you error to every flash? But don't worry, if you can use erecovery, try This: You'll notice that you have to pay for this. Good Luck!
https://funkyhuawei.club/register
Click to expand...
Click to collapse
Thank you so much, I realized that Fastboot was not corrupted!
But...
I tryied to flash system, recovery and boot images, then I did the Factory Reset from recovery...but It didn't worked, my phone bootloops like there's no System installed.
I have two hypotesis: 1) Fastboot is not able to flash properly the system partition on Huawei P8 lite 2017, even though it says that the process has been successful.
2) The system I flashed is not compatible...I extracted the system.img file from a PRA-LX1C55B120 (Found with Firmware Finder), while my version was PRA-LXC55B105....Maybe it pretends the B105, and refuses the B120. But they should be the same thing
This is impossible.

0000729399 said:
Thank you so much, I realized that Fastboot was not corrupted!
But...
I tryied to flash system, recovery and boot images, then I did the Factory Reset from recovery...but It didn't worked, my phone bootloops like there's no System installed.
I have two hypotesis: 1) Fastboot is not able to flash properly the system partition on Huawei P8 lite 2017, even though it says that the process has been successful.
2) The system I flashed is not compatible...I extracted the system.img file from a PRA-LX1C55B120 (Found with Firmware Finder), while my version was PRA-LXC55B105....Maybe it pretends the B105, and refuses the B120. But they should be the same thing
This is impossible.
Click to expand...
Click to collapse
Exclude the first hypothesis, because FASTBOOT is 100% trusted. I think that you need to download from firmware finder this version: PRA-LX1C432B110. This version should work. Unzip the update.zip downloaded and with Huawei Update Extractor get the System, boot and recovery images. Then flash everything with fastboot, like this: Fastboot flash system System.img
Remember that commands are case sensitive so be careful. Good luck!

Manuele1000 said:
Exclude the first hypothesis, because FASTBOOT is 100% trusted. I think that you need to download from firmware finder this version: PRA-LX1C432B110. This version should work. Unzip the update.zip downloaded and with Huawei Update Extractor get the System, boot and recovery images. Then flash everything with fastboot, like this: Fastboot flash system System.img
Remember that commands are case sensitive so be careful. Good luck!
Click to expand...
Click to collapse
ok I'll try right now but why that version should work? Do I have to flash only the system partition?

[GUIDE] How to ROOT the HTC Desire 10 Pro

Hello Everybody !!
I'm not a developer but I successfully rooted my HTC Desire 10 Pro and since many people seem to have problems,I decided to make a guide. The computer OS I used was Windows 10 but if you use linux, I'm sure you can adapt to the method.
1. First install device drivers and download ADB fastboot from this thread
2. Dowload TWRP 3.1 for your phone variant from here and move it to the ADB fastboot folder and rename the img file to "twrp"
twrp-3.1.1-a56dj_pro_uhl.img Desire 10 Pro Single SIM
twrp-3.1.0-a56dj_pro_dugl.img Desire 10 Pro Dual SIM
3. Press shift + right click and select open command window here.
4. Go to developer options on your phone and select Allow USB debugging and Allow bootloader to be unlocked.
(Very important step)
5. Connect the phone to your PC and check the connection by typing the following in the command prompt.
adb devices
If it shows only one device, you're good to go!!
Otherwise remove any other connected phones/devices and disable any Android emulators if you have them. (Like Bluestacks)
6. Go to HTCDev website and unlock your bootloader, (HTCDev will give those instructions), the phone model isn't shown but select "other supported models".
(Warning - This will erase all your data so make a backup)
7. Type the following into the command window to boot your device into bootloader/fastboot mode:
adb reboot bootloader
8. Once your device boots into bootloader mode, type this into the command line.
fastboot flash recovery twrp
9. Once TWRP is successfully flashed on your device, type this final command to reboot your device.
fastboot reboot
10. Download SuperSu latest version
SuperSu v2.82
11. Copy the SuperSu zip file to your phone internal storage
12. Then type this command to go to TWRP,
fastboot reboot recovery
13. Wait for TWRP to load and tap Install
14. Select the SuperSu zip file and flash it
15. After flashing finishes, tap on Reboot System
16. Congradzz !!! Your HTC Desire 10 Pro is rooted now.
Now you can further customize if you like by installing Xposed.
Thanks for following and please reply in the comments if I have made any mistake or if you need more help.
And I'm NOT responsible for any damages even though it's unlikely to happen.
Edit : This was confirmed to be working on version 1.18.400.20 and it doesnt seem to work on 2.13.709.20. Please have a RUU if you're trying on a version in between, just to be on the safe side.
Credit to
@sabpprook and @jemmini for the TWRP variants
@Snoop05 for the ADB Fastboot Installer
@Chainfire for SuperSu
And all of XDA for being awesome ?

Any chance on doing a full backup before installing TWRP, as I don't have a default recovery of 1.18.400.20 dugl dual sim and still hope for OTA?
I hoped for "fastboot boot recovery" but I think only with nougat firmware was reimplemented.
Thanks

I think HTC disabled remote recovery booting so you'll have to replace the stock recovery.img
But I think I saw the stock recovery.img for our phone in another thread. You can download it and flash in case of a new update.
And what do u mean nougat firmware was reimplemented? Did you get the Nougat update ?

FireStorm919 said:
I think HTC disabled remote recovery booting so you'll have to replace the stock recovery.img
But I think I saw the stock recovery.img for our phone in another thread. You can download it and flash in case of a new update.
And what do u mean nougat firmware was reimplemented? Did you get the Nougat update ?
Click to expand...
Click to collapse
Can u redirect me to that stock recovery, pls?
The nougat firmware for the m9 had implemented boot to recovery...

process failed
Hi everyone,
tried this process on a A56DJ_PRO_DUGL with system OS-2.13.709.20 and the last step (supersu 2.82) failed, it said unable to modify boot image and aborted.
Used magisk 15 and it was able to modify boot but it did not boot, always asked for password for encrypted data, even after factory reset. I tried to restore the backup I previously made with twrp 3.1.1.0 (boot + system) but now it does not boot. Download, bootloader and twrp works anyway.
I will try to fix it, hope it serves as guidance to anyone trying to root the same 10 Pro version.

david_montes said:
Hi everyone,
tried this process on a A56DJ_PRO_DUGL with system OS-2.13.709.20 and the last step (supersu 2.82) failed, it said unable to modify boot image and aborted.
Used magisk 15 and it was able to modify boot but it did not boot, always asked for password for encrypted data, even after factory reset. I tried to restore the backup I previously made with twrp 3.1.1.0 (boot + system) but now it does not boot. Download, bootloader and twrp works anyway.
I will try to fix it, hope it serves as guidance to anyone trying to root the same 10 Pro version.
Click to expand...
Click to collapse
Try flashing the uninstall zip for magisk.
Also, if u have a backup, try to wipe boot and system partitions before restoring.
Good luck

Fain11 said:
Try flashing the uninstall zip for magisk.
Also, if u have a backup, try to wipe boot and system partitions before restoring.
Good luck
Click to expand...
Click to collapse
I did try to uninstall magisk but it gets stuck in the boot process (only htc logo), the same thing happens with the backup I made with twrp (only htc logo), the best result so far is applying magisk to the boot, then the system starts but keeps asking me to decrypt the storage, the exact message is "The password you have entered is correct, but unfortunately your data is corrupt" I did factory reset but does not solve the problem, it keeps asking for the password.
Also RUU for my OS-2.13.709.20 is not available so I'm currently stuck.
These things get harder and harder every day

Desire 10 Pro recovered
Finally the last option was to fully stock flash with RUU 2.13.709.20, but now I am back to step one.
At least it works
---------- Post added at 04:20 PM ---------- Previous post was at 04:08 PM ----------
Been human means to keep trying, so I tried again, now I did full factory wipe before applying supersu 2.82 (not working) or magisk 15 (works but keeps asking for a password to decrypt storage).
So I can confirm this procedure does not work with OS-2.1.3.709.20.
If any of you is able to root this version I will be glad to try again in the future but by now I'm done with htc 10 pro.
Happy new year everyone!

thanks for the guide, I was waiting for it and just came in time
I am wondering if this method will work on a56dj_pro_dugl software number 1.18.401.20 ?
what software number did you tried it on ?
thanks for the help

thekingomar said:
thanks for the guide, I was waiting for it and just came in time
I am wondering if this method will work on a56dj_pro_dugl software number 1.18.401.20 ?
what software number did you tried it on ?
thanks for the help
Click to expand...
Click to collapse
It has been confirmed to be working on 1.18.400.20
Please make a backup before u try because this doesnt seem to work on newer ones like 2.13.709.20
Please leave a reply here if u get it working.
?

Fain11 said:
Can u redirect me to that stock recovery, pls?
The nougat firmware for the m9 had implemented boot to recovery...
Click to expand...
Click to collapse
Sorry for the delay,
I couldn't find that link either so I extracted it from a RUU for variant a56dj_pro_dugl
Here you go
https://drive.google.com/file/d/1FxKDDOXISNTf5uQJT90nlw6tuClJaX9o/view?usp=drivesdk
Hope this helps
???

thanks for the guide again,
after pulling my courage together I decided to do it on my a56dj_pro_dugl software number 1.18.401.20
everything worked fine from the top to step 14 but there is one problem, flashing the SuperSU zip file is failed,
I tried to re-download it and not renaming it but still the same, here is the log
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
any suggestions ?

never mind
just rooted it using Magisk , apparently SuperSU is not applicable on my device
I used the same method as SuperSU zip
downloaded the latest version of Magisk (v 15.3) zip file and install it using TWRP
and everything is fine ever since
thanks folks for being awsome developers :laugh:

Required Video
Hi Member,
Can you please upload step by step video for root the HTC Desire 10 pro.
waiting

warnning !!! htc desire 10 pro os 2.13.709.23 taiwan
Don't try to root,
it seem rooted but no , if you wipe your soft brick, and difficult or impossible,
to fine the stosk rom os 2.13.709.23 !!!!
No body can help !!!

Mykyzo007 said:
Don't try to root,
it seem rooted but no , if you wipe your soft brick, and difficult or impossible,
to fine the stosk rom os 2.13.709.23 !!!!
No body can help !!!
Click to expand...
Click to collapse
Did you manage to unbrick?

yes
dearbasheer said:
Did you manage to unbrick?
Click to expand...
Click to collapse
yes i manage to unbrick, i'am waiting to see the rom .
But i need help

Unable to flash recovery
When unlocking bootloader I selected any other supported since desire 10 pro isn't listed. Process went through but when flashing twrp I'm getting error. Commad not allowed whereas it shows unlocked

FireStorm919 said:
Hello Everybody !!
I'm not a developer but I successfully rooted my HTC Desire 10 Pro and since many people seem to have problems,I decided to make a guide. The computer OS I used was Windows 10 but if you use linux, I'm sure you can adapt to the method.
1. First install device drivers and download ADB fastboot from this thread
2. Dowload TWRP 3.1 for your phone variant from here and move it to the ADB fastboot folder and rename the img file to "twrp"
twrp-3.1.1-a56dj_pro_uhl.img Desire 10 Pro Single SIM
twrp-3.1.0-a56dj_pro_dugl.img Desire 10 Pro Dual SIM
3. Press shift + right click and select open command window here.
4. Go to developer options on your phone and select Allow USB debugging and Allow bootloader to be unlocked.
(Very important step)
5. Connect the phone to your PC and check the connection by typing the following in the command prompt.
adb devices
If it shows only one device, you're good to go!!
Otherwise remove any other connected phones/devices and disable any Android emulators if you have them. (Like Bluestacks)
6. Go to HTCDev website and unlock your bootloader, (HTCDev will give those instructions), the phone model isn't shown but select "other supported models".
(Warning - This will erase all your data so make a backup)
7. Type the following into the command window to boot your device into bootloader/fastboot mode:
adb reboot bootloader
8. Once your device boots into bootloader mode, type this into the command line.
fastboot flash recovery twrp
9. Once TWRP is successfully flashed on your device, type this final command to reboot your device.
fastboot reboot
10. Download SuperSu latest version
SuperSu v2.82
11. Copy the SuperSu zip file to your phone internal storage
12. Then type this command to go to TWRP,
fastboot reboot recovery
13. Wait for TWRP to load and tap Install
14. Select the SuperSu zip file and flash it
15. After flashing finishes, tap on Reboot System
16. Congradzz !!! Your HTC Desire 10 Pro is rooted now.
Now you can further customize if you like by installing Xposed.
Thanks for following and please reply in the comments if I have made any mistake or if you need more help.
And I'm NOT responsible for any damages even though it's unlikely to happen.
Edit : This was confirmed to be working on version 1.18.400.20 and it doesnt seem to work on 2.13.709.20. Please have a RUU if you're trying on a version in between, just to be on the safe side.
Credit to
@sabpprook and @jemmini for the TWRP variants
@Snoop05 for the ADB Fastboot Installer
@Chainfire for SuperSu
And all of XDA for being awesome
Click to expand...
Click to collapse
Could u do me a favor ?
I just need an .apk from a system app called "sangam IME" it's a keyboard & u can extract the .apk with lucky patcher or any other similar apps
I need it like hell , caused I removed it & then realised it's the only keyboard that pops up in encryption page at startup & not having it means I can only reset my phone when I have a physical keyboard connected with otg ! Thanks alot

Sangam IME
seyyed.april said:
Could u do me a favor ?
I just need an .apk from a system app called "sangam IME" it's a keyboard & u can extract the .apk with lucky patcher or any other similar apps
I need it like hell , caused I removed it & then realised it's the only keyboard that pops up in encryption page at startup & not having it means I can only reset my phone when I have a physical keyboard connected with otg ! Thanks alot
Click to expand...
Click to collapse
Hi!
Sorry for the delay, I havent checked my inbox for quite some time.
I searched around for this Sangam IME everywhere in,
/system/app
/system/priv-app
/data/app
/data/app-private
But I couldnt find it. I even tried using 3rd party apps like you suggested but it simply doesnt seem to exist.
Even a quick Google search didnt give me any leads.
So are you sure the name is correct ?
Or maybe any more ideas on where to look for the apk ?
Sorry I couldnt be of more help

Remove warning bootloader unlocked message (EVA-L19)

Hi everyone!
As you can see (according to the title), I'm newbie for this.
Is there a way to get rid of/remove/hide this message?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I was Samsung user for ages, this is my first Huawei device... i hope there is someone who can help & explain 'how to' step by step.
2 .app files downgrade + fastboot oem relock (code) didn't help
Sorry, english is not my native language, thx in advance.

As far as I know, this is how it works! There's no way to remove this message. Cheers!

roottree said:
As far as I know, this is how it works! There's no way to remove this message. Cheers!
Click to expand...
Click to collapse
Yup, I thought so... I expected such an answer, but I still wanted to be 100% sure that could not be undone afterwards. Thank you!
The first time I successfully re-locked it, there was just "Phone: Relocked" message in fastboot mode, but warning still appeared.
I played a bit more with my P9, trying to enable an OEM unlock option at last (wich is ofc unavailable/grayed out).
Now I can not even activate the command for some reason, it says this:
Well, i can live with this if there is no solution. Everything else works fine.

>> trying to enable an OEM unlock option at last (wich is ofc unavailable/grayed out).
Try the following: by Vol+ and Pow boot to eRecovery and take Hard reset with wiping Internal data.
Also, from Settings, Advanced, Backup and reset, Factory reset with Internal memory.
Before, remove password/pin/fingerprint

You can go back to stock and fully relock your bootloader. But for that you have to "rollback" to Android 6 and after you did that you can update normally trough EMUI to the latest version. Your bootloader will be locked again and the message will disappear.
Relocking the bootloader with modifications like root installed is not possible as far as I know.

Rollback will do it for sure but it takes longer (and user did not report which exact stock ROM, cust, etc he has, all that must be taken care when rolling back)
Btw, rollback implicitely includes Factory reset and wiping Internal memory
IMO, Factory reset with wiping Internal memory, directly from Nougat (without rolling back to MM), might be enough to get OEM Onlock button back functional.
After that, relocking Bootloader must work.
Note: If user wants to have Bootloader unlocked, then must live with the Warning on boot.
Unlocked Bootloader (as long as no root nor TWRP) does not prevent OTA.
It is just a warning on boot, nothing more.
Also, locking or relocking Bootloader automatically forces Hard reset

zgfg said:
IMO, Factory reset with wiping Internal memory, directly from Nougat (without rolling back to MM), might be enough to get OEM Onlock button back functional.
Click to expand...
Click to collapse
Nope, i wiped it... i will try to rollback to C900B300 -> C432B210. Thx!
I know that OEM switch is active even with M6 & unlocked Bootloader combined, but I want it active with N7 even with locked BL since i am done with playing, stock rom works smooth, and fast enough.
I will try to relock it again from M6 + OEM unlocked and let you know guys!

EDIT:
C900B300 (android 7) -> fastboot oem relock (code) didn't help, now flashing M6
__________
There is another problem with android 6:
OEM Switch works just fine, but can't relock bootloader. Fastboot command is accepted, but wiping data always fails at 7%
Prolly there is something that I am doing wrong. Not sure if it is flashing or something else.

Can you try wiping with the recovery before? First try TWRP and if it doesn't work then stock recovery.

christopherpfister said:
Can you try wiping with the recovery before? First try TWRP and if it doesn't work then stock recovery.
Click to expand...
Click to collapse
Sorry, could you be more specific? I am still newbie for this.
If You mean:
1. flash twrp recovery => wipe all
2. flash stock from B210 and retry
One more question. I am not sure how to flash full stock firmware?
a: Unzip "update.zip" to sd/dload and VOL+/- & ON combination
b: Flash .APP via fastboot?
What are cust package and public data for? Never flashed 'em to my device.

Even if reset/wiping on relock failed, did you reboot to system and check if OEM Unlock button is now workable (no more grayed)?

danilo0230 said:
Sorry, could you be more specific? I am still newbie for this.
If You mean:
1. flash twrp recovery => wipe all
2. flash stock from B210 and retry
One more question. I am not sure how to flash full stock firmware?
a: Unzip "update.zip" to sd/dload and VOL+/- & ON combination
b: Flash .APP via fastboot?
What are cust package and public data for? Never flashed 'em to my device.
Click to expand...
Click to collapse
That's what I meant. No success?
You have to extract the contents of the zip file into the folder called "dload". The folder has to be on the root of your *external* sdcard.
You need to do that with all available zips, not just the main one!
Otherwise you will be missing some data including huawei applications like the keyboard.

zgfg said:
Even if reset/wiping on relock failed, did you reboot to system and check if OEM Unlock button is now workable (no more grayed)?
Click to expand...
Click to collapse
OEM Button works fine since i am on android 6MM, but to get it work on Nougat i suppose that i have to relock bootloader, atm it's mission impossible to me
christopherpfister said:
That's what I meant. No success?
You have to extract the contents of the zip file into the folder called "dload". The folder has to be on the root of your *external* sdcard.
You need to do that with all available zips, not just the main one!
Otherwise you will be missing some data including huawei applications like the keyboard.
Click to expand...
Click to collapse
Didn't try to mess up with recoveries yet, i guess that i flashed it wrong and that's what causing stock-recovery unable to wipe data.
I will retry to flash it as you said (all files merged in dload) before re-flashing recovery. Thx!

danilo0230 said:
Didn't try to mess up with recoveries yet, i guess that i flashed it wrong and that's what causing stock-recovery unable to wipe data.
I will retry to flash it as you said (all files merged in dload) before re-flashing recovery. Thx!
Click to expand...
Click to collapse
Don't merge the files. I believe they have the same names so that wouldn't work. Do one after another. You can switch the files from your computer while TWRP is running after each flash.

If you are on b182, you should be receiving OTA for Nougat, you don't need to DLOAD Nougat installation
If OEM Unlocking button is functional now, it will stay so when you update to Nougat
I never relocked, I have no problem with the unlocked Bootloader and its warning - but you may try to 'lock' and then 'unlock' again
And double-check iare you using proper code - in other threads people used to report that relocking works

christopherpfister said:
Don't merge the files. I believe they have the same names so that wouldn't work. Do one after another. You can switch the files from your computer while TWRP is running after each flash.
Click to expand...
Click to collapse
Yup, there are same named files. I know that only TWRP can flash .zip -s, but isn't stock firmware without TWRP? Is there any sequence, which file comes first?
zgfg said:
If you are on b182, you should be receiving OTA for Nougat, you don't need to DLOAD Nougat installation
If OEM Unlocking button is functional now, it will stay so when you update to Nougat
I never relocked, I have no problem with the unlocked Bootloader and its warning - but you may try to 'lock' and then 'unlock' again
And double-check iare you using proper code - in other threads people used to report that relocking works
Click to expand...
Click to collapse
Ok then, updating it via OTA with OEM enabled ---> trying to relock again. I Will let you know if i succeeded
__________
Well... i tried to reduce battery drain, that's the main reason why i unlocked it.
Afterwards I found out i am shooting in the dark, it's a common hardware problem for P9 devices.
Code is 100% correct 'coz i am using copy/paste from calculation, thx for support guys!

danilo0230 said:
Ok then, updating it via OTA with OEM enabled ---> trying to relock again. I Will let you know if i succeeded
__________
Well... i tried to reduce battery drain, that's the main reason why i unlocked it.
!
Click to expand...
Click to collapse
If you are concerned about battery,
update up to b397 and install then Magic Rainbow v4
https://forum.xda-developers.com/p9/development/rom-huawei-p9-magicrainbow-v4-t3759292
It's based on stock ROM but cleaned from bloatware, prerooted with Magisk, etc
Edit: Maybe OTA will stop yoy with b392 or b394.
Use HWOTA methods to update up to L19 c432 b397
https://forum.xda-developers.com/showpost.php?p=74913874&postcount=3
For that, of course, you need unlocked Bootloaderr and TWRP for Nougat
https://forum.xda-developers.com/p9/development/twrp-t3565703

zgfg said:
you may try to 'lock' and then 'unlock' again
Click to expand...
Click to collapse
Yes, but actually nope...
1. OTA automatically updated B210 => B386
2. fastboot relock worked as you said (wiped 100% this time)
3. OEM button still unavailable
4. Checked fastboot: Phone: unlocked; FRP: unlocked;
Damn! Never understood this

I don't understabd what do you really want, if Fastboot shows Phone unlocked, FRP unlocked then you are ready for TWRP, no matter how OEM Unlocking button shows (grayed out but isn't now in ON position?)
Or, you can do once again Rolling back and forth by OYA to Nougat, if you really want locked Bootloader.

zgfg said:
I don't understabd what do you really want
Click to expand...
Click to collapse
I want bootloader locked without any warning message at startup & working OEM button with Nougat if it's even possible in my case?
zgfg said:
if Fastboot shows Phone unlocked, FRP unlocked then you are ready for TWRP, no matter how OEM Unlocking button shows (grayed out but isn't now in ON position?)
Click to expand...
Click to collapse
Yup i know that I can and how to flash TWRP... but do i even need TWRP for that? If yes, how (step by step)?
zgfg said:
Or, you can do once again Rolling back and forth by OYA to Nougat, if you really want locked Bootloader.
Click to expand...
Click to collapse
I'm done with playing with customs, rooting etc, just wanna restore completely clean factory firmware (without warnins, greyed out buttons etc.)