Related
This will be a thread only for people willing to test a root method for the s6 active
I will volunteer.
I am on marshmellow test PE9 and can Odin back to 5.1.1 if needed.
Sent from my SAMSUNG-SM-G890A using XDA-Developers mobile app
I don't suggest you attempt an ODIN from Marshmallow to Lollipop
I attempted to ODIN from Marshmallow to Lollipop due to Battery Drain and poor cell signal after updating. It soft bricked my phone and could not get smart switch to restore or even the Best Buy Samsung Tech to reflash marshmallow. I had to send it to Samsung Service Center as a last ditch effort to unbrick.
Basically I tried to flash 5.1.1 it failed ODIN Flash. Then I thought well I the Engineering Build 0K2 Combination filed worked when I flashed it using 5.1.1, so I thought maybe I can flash it back to this version then reflash to 5.1.1. It didn't work for me and ended up soft bricking the device. Who knows maybe it will let you flash 5.1.1 from Marshmallow.
Bones2374 said:
I will volunteer.
I am on marshmellow test PE9 and can Odin back to 5.1.1 if needed.
Click to expand...
Click to collapse
Cool so what you'll have to do first, it's visit samsungfirmware.com, and download the 5.1.1 rom. Once you do that, visit this site, and download necessary files. Report back when you have finished, I will then tell you what to do next.
Please understand any bricked or damaged devices, will not be my fault, for it is you who wants to test it.
Flash back to android 5.1.1 using Odin, and then flash the G890AUCU3AOK2.tar file, and once done go into recovery on your phone, and on your phone hit fix root.
http://forum.gsmhosting.com/vbb/f453/how-root-g890a-5-0-2-5-1-1-a-2103269/
Ihaveaflashingproblem said:
I attempted to ODIN from Marshmallow to Lollipop due to Battery Drain and poor cell signal after updating. It soft bricked my phone and could not get smart switch to restore or even the Best Buy Samsung Tech to reflash marshmallow. I had to send it to Samsung Service Center as a last ditch effort to unbrick.
Basically I tried to flash 5.1.1 it failed ODIN Flash. Then I thought well I the Engineering Build 0K2 Combination filed worked when I flashed it using 5.1.1, so I thought maybe I can flash it back to this version then reflash to 5.1.1. It didn't work for me and ended up soft bricking the device. Who knows maybe it will let you flash 5.1.1 from Marshmallow.
Click to expand...
Click to collapse
Hmm were you able to enter Odin mode, or recovery?
I attempted to ODIN from Marshmallow to Lollipop due to Battery Drain and poor cell signal after updating. It soft bricked my phone and could not get smart switch to restore or even the Best Buy Samsung Tech to reflash marshmallow. I had to send it to Samsung Service Center as a last ditch effort to unbrick.
Basically I tried to flash 5.1.1 it failed ODIN Flash. Then I thought well I the Engineering Build 0K2 Combination filed worked when I flashed it using 5.1.1, so I thought maybe I can flash it back to this version then reflash to 5.1.1. It didn't work for me and ended up soft bricking the device. Who knows maybe it will let you flash 5.1.1 from Marshmallow.
Click to expand...
Click to collapse
How would the system have any memory of the previous OS, does Odin wipe all data before flashing? If it does how would there be any problems?
Thanks for your time,
Matt
Iglooian said:
I attempted to ODIN from Marshmallow to Lollipop due to Battery Drain and poor cell signal after updating. It soft bricked my phone and could not get smart switch to restore or even the Best Buy Samsung Tech to reflash marshmallow. I had to send it to Samsung Service Center as a last ditch effort to unbrick.
Basically I tried to flash 5.1.1 it failed ODIN Flash. Then I thought well I the Engineering Build 0K2 Combination filed worked when I flashed it using 5.1.1, so I thought maybe I can flash it back to this version then reflash to 5.1.1. It didn't work for me and ended up soft bricking the device. Who knows maybe it will let you flash 5.1.1 from Marshmallow.
How would the system have any memory of the previous OS, does Odin wipe all data before flashing? If it does how would there be any problems?
Thanks for your time,
Matt
Click to expand...
Click to collapse
Well once you flash with Odin, it updates the system partitions. So you have to factory reset after the update.
I was in download mode where you flash Odin files.
---------- Post added at 11:14 PM ---------- Previous post was at 11:03 PM ----------
Let me provide some background. I bought the phone with 5.1.1
AT&T system update automatically pushed marshmallow update. I wanted to roll back due to some noticeable issues with marshmallow. So I attempted to Odin 5.1.1 it failed in Odin with no issues. Then I tired a couple different lollipop files they failed. I then tried the ok2 combination fa50 file and it failed but this time the phone booted to update failed blue screen and would not turn off. I could go to the download mode where you flash Odin files, but it would fail on everything. If there was an Odin flashable marshmallow I'm sure it would work. The phone would not shutoff. It stay on until the battery drained completely. I visited samsung tech at best buy who could not charge it to push the marshmallow update with his smart software. It gave him and x so he told me to send it to samsung they can do more. I forgot to mention smart switch did not work for me despite having two different serial numbers from owning multiple s6 actives. I didn't decide to install the app package disable on my other phone to prevent the marshmallow update. It might have trouble because I use straight talk AT&T and the updates have to do with voLTE which don't work with prepaid I believe.
Ihaveaflashingproblem said:
I was in download mode where you flash Odin files.
---------- Post added at 11:14 PM ---------- Previous post was at 11:03 PM ----------
Let me provide some background. I bought the phone with 5.1.1
AT&T system update automatically pushed marshmallow update. I wanted to roll back due to some noticeable issues with marshmallow. So I attempted to Odin 5.1.1 it failed in Odin with no issues. Then I tired a couple different lollipop files they failed. I then tried the ok2 combination fa50 file and it failed but this time the phone booted to update failed blue screen and would not turn off. I could go to the download mode where you flash Odin files, but it would fail on everything. If there was an Odin flashable marshmallow I'm sure it would work. The phone would not shutoff. It stay on until the battery drained completely. I visited samsung tech at best buy who could not charge it to push the marshmallow update with his smart software. It gave him and x so he told me to send it to samsung they can do more. I forgot to mention smart switch did not work for me despite having two different serial numbers from owning multiple s6 actives. I didn't decide to install the app package disable on my other phone to prevent the marshmallow update. It might have trouble because I use straight talk AT&T and the updates have to do with voLTE which don't work with prepaid I believe.
Click to expand...
Click to collapse
Do you still have the phone? if so I can help you with the problem.
Continuing my previous instructions, after you fix root, and phone restarts, you should see factory binary. It will take quite a while to fully boot. When done, you should have full root permissions. This is where the experimental part comes to play. You won't have any Google or samsung apps, so head over to samsungfirmware.com, and get the 5.0.2 rom. Extract the file, and then rename the tar.md5 file, by removing the.md5 part. Then extract that using 7 zip. Now find the bootloader file, and replace the 5.1.1 bootloader file with this, in the hopes of unlocking the bootbootloader. Post back whether or not this works, then we can mover on top the next steps.
Bones2374 said:
I will volunteer.
I am on marshmellow test PE9 and can Odin back to 5.1.1 if needed.
Click to expand...
Click to collapse
I put on the thread the necessarily steps you need to take as a volunteer, I hope you check them out, and get back to us soon!!!
Tonster, why are you asking people to experiment with their phones? Do you have any reason to believe that following your instructions will lead to a rooted phone? Please post a screen shot proving that you've gotten it to (partially?) work. AoN
anneoneamouse said:
Tonster, why are you asking people to experiment with their phones? Do you have any reason to believe that following your instructions will lead to a rooted phone? Please post a screen shot proving that you've gotten it to (partially?) work. AoN
Click to expand...
Click to collapse
I have tried this method on android 5.1.1, and can confirm that it is a working partial method of root. However I am now running marshmallow, and unfortunately I have no valid screen shots, but if you need proof, watch this YouTube video.
Comment whether this method worked for you or not.
Tonster21 said:
I have tried this method on android 5.1.1, and can confirm that it is a working partial method of root. However I am now running marshmallow, and unfortunately I have no valid screen shots, but if you need proof, watch this YouTube video.
Click to expand...
Click to collapse
this is to unlock carrier only.
izote61 said:
this is to unlock carrier only.
Click to expand...
Click to collapse
I do realize that, but I am looking for possible ways to use this, and root the phone.
Tonster21 said:
I do realize that, but I am looking for possible ways to use this, and root the phone.
Click to expand...
Click to collapse
not possible I have file for 5.0 and 5.11 root.
at this moment there is no root for 6.0.1 and if root become available will be at xda forum
When can be available a root? i upgrado to 6.1.1 and i see that i dont have Polish language
dustmanop said:
When can be available a root? i upgrado to 6.1.1 and i see that i dont have Polish language
Click to expand...
Click to collapse
This is an old thread
That being said, root is being worked on by a handful of people. Since this device is strictly AT&T however (and I'm sure a lot of other reasons too), root for 5.1.1 is still VERY experimental and breaks most of the device functionality from what I've heard. 6.0.1 is going to be an even harder challenge. Root may be possible some time in the future but I wouldn't count on it being easy.
Tonster21 you joined the forum July 29th, 2016..
You are having forum members download files from other websites and have absolutely ZERO credentials nor do have any relevant solutions to any issues regarding the S6 Active.
You might want to validate your actions real quick..
---------- Post added at 03:05 PM ---------- Previous post was at 02:58 PM ----------
FevenKitsune said:
This is an old thread
Click to expand...
Click to collapse
The OP just joined the forum in July this year .. explain what you mean by old?
Useless time wasting of forum members with probable cause for downloading malicious software is what this is..
*Utter noob alert!*
tl;dr - can i update to MM 6+ without totally screwing my phone and entering a whole world of pain?
Proud owner of mongrel SM-N920A purchased from HK via eBay. Device has no branding on hardward / software other than Samsung.
Settings > System > About Device shows model number = SM-N920F. LIES!!!!!
Phone INFO *Samsung* apk shows it's really an SM-N920A
I've attached output from Phone INFO showing 'General', 'CSC', 'Firmware' and 'Android' info.
Having read over threads on Sammobile and here on XDA, it appears some people are losing anything from mobile reception & data to full on apocalyptic bricking. Most of these posts are from earlier in 2016 so I'm wondering, now we're further down the line and the dust has settled, whether there's any consensus on best way forward to get Marshmallow / Nougat and beyond - if at all.
Anyone out there able to offer help and guidance?
Please :crying:
Ah come onnn! Someone here must be able to help!?
dmlargo said:
Ah come onnn! Someone here must be able to help!?
Click to expand...
Click to collapse
This is commonly done to increase the value of the phone by tricking the buyer into thinking it's a non-US model.
Anyway, AT&T and T-Mobile are better than Verizon or Sprint if it comes to using them outside the US, because of better LTE band support.
Since an AT&T phone will only receive OTA updates with an AT&T SIM inserted, you have to sideload the MM update yourself through adb and then keep on sideloading every new build as it comes out.
murtaza02 said:
This is commonly done to increase the value of the phone by tricking the buyer into thinking it's a non-US model.
Anyway, AT&T and T-Mobile are better than Verizon or Sprint if it comes to using them outside the US, because of better LTE band support.
Since an AT&T phone will only receive OTA updates with an AT&T SIM inserted, you have to sideload the MM update yourself through adb and then keep on sideloading every new build as it comes out.
Click to expand...
Click to collapse
So...
If I can get my hands on a prepaid / payg at&t sim here in the UK I could theoretically just get an OTA update that way?
If not, I'll look into sideloading. Do you know of any instructions on how to do?
And, thanks for replying. Very much appreciated
dmlargo said:
So...
If I can get my hands on a prepaid / payg at&t sim here in the UK I could theoretically just get an OTA update that way?
If not, I'll look into sideloading. Do you know of any instructions on how to do?
And, thanks for replying. Very much appreciated
Click to expand...
Click to collapse
Not necessarily, since the device needs to be connected to AT&Ts network, the SIM would either not work, or start Roaming in the UK.
Sideloading means you will have to get the OTA Zip files and install them on your phone using the Android Debugging Bridge (ADB).
This is the thread HERE: http://forum.xda-developers.com/att...ow-to-manually-update-to-marshmallow-t3380624
It's a very well written guide on how to update the AT&T Note 5.
Your current build number is different from the one used in the main post of the guide, so you're going to have to browse through the thread, grab a different build of Lollipop, flash that, then sideload the Marshmallow updates, one by one, till you get to a fairly new build, then what you do is, factory reset the phone, so you have a clean install of Marshmallow on your phone.
murtaza02 said:
Not necessarily, since the device needs to be connected to AT&Ts network, the SIM would either not work, or start Roaming in the UK.
Click to expand...
Click to collapse
Of course! I'm an idiot. Doesn't bode well does it! :laugh:
murtaza02 said:
Sideloading means you will have to get the OTA Zip files and install them on your phone using the Android Debugging Bridge (ADB).
This is the thread HERE: http://forum.xda-developers.com/att...ow-to-manually-update-to-marshmallow-t3380624
It's a very well written guide on how to update the AT&T Note 5.
Your current build number is different from the one used in the main post of the guide, so you're going to have to browse through the thread, grab a different build of Lollipop, flash that, then sideload the Marshmallow updates, one by one, till you get to a fairly new build, then what you do is, factory reset the phone, so you have a clean install of Marshmallow on your phone.
Click to expand...
Click to collapse
Build number being LMY4X.N920AUCU1AOGG
Doesn't matter that bootloader, PDA,CSC and baseband versions are mostly all different?
You're a great help. Thank you! +1
dmlargo said:
Of course! I'm an idiot. Doesn't bode well does it! :laugh:
Build number being LMY4X.N920AUCU1AOGG
Doesn't matter that bootloader, PDA,CSC and baseband versions are mostly all different?
You're a great help. Thank you! +1
Click to expand...
Click to collapse
You're on AOJ1 According to your screenshot.
You need to downgrade to UPB2 Or something and then flash the OTAs from Marshmallow to your phone from PB2.
I'm out of the house at the moment, will be home very soon, and try to find a link for you.
murtaza02 said:
You're on AOJ1 According to your screenshot.
You need to downgrade to UPB2 Or something and then flash the OTAs from Marshmallow to your phone from PB2.
I'm out of the house at the moment, will be home very soon, and try to find a link for you.
Click to expand...
Click to collapse
Thanks man.
For that version AOJ1 - that's bootloader version right? Just so I can differentiate what to look for.
Take it easy
dmlargo said:
Thanks man.
For that version AOJ1 - that's bootloader version right? Just so I can differentiate what to look for.
Take it easy
Click to expand...
Click to collapse
I happened to come across the 2BPE6 Marshmallow ROM file for the N920A Note 5.
Here's the link: https://mega.nz/#!8Ep0DRZA!jXd4QtMcmN47QIOQSHV8h0CqAc7aVMB5aR4VA_Zw1Pw
You can flash it with Odin, a bit easier to use than ADB, so it'll be better for you as well.
The file is zipped, once you extract it, there'll be 4 different files, one containing system and the main ROM, the other will contain the BL (Bootloader), another with the modem (Radio) and the last with the CSC (Customer Sales Code). Match each file to it's respective field in Odin, the BL file will have BL in the filename so add the BL file to the BL tab in Odin, the CP file to the CP tab, the AP file to the AP tab and the CSC file to the CSC tab.
Then turn your phone off, once it's completely off, hold Power + Home + Volume Down, it'll ask Continue or Cancel, press Volume Up to Continue. You'll be in Odin / Downloading mode, from here, just connect your phone to your PC, flash the Odin files, the phone will reboot itself a few times, not to worry, and it'll eventually boot to the marshmallow start screen.
As for grabbing Odin, I'd recommend the latest version 3.12.3, it supports the newest devices up to S7 and S7 Edge, and it has all the bug fixes as well, so it should work fine on your phone. Link here: http://forum.xda-developers.com/android/software/odin-3-12-3-worlds-att-s7-odin-firmware-t3401470
Good luck.
murtaza02 said:
I happened to come across the 2BPE6 Marshmallow ROM file for the N920A Note 5.
Here's the link: https://mega.nz/#!8Ep0DRZA!jXd4QtMcmN47QIOQSHV8h0CqAc7aVMB5aR4VA_Zw1Pw
You can flash it with Odin, a bit easier to use than ADB, so it'll be better for you as well.
The file is zipped, once you extract it, there'll be 4 different files, one containing system and the main ROM, the other will contain the BL (Bootloader), another with the modem (Radio) and the last with the CSC (Customer Sales Code). Match each file to it's respective field in Odin, the BL file will have BL in the filename so add the BL file to the BL tab in Odin, the CP file to the CP tab, the AP file to the AP tab and the CSC file to the CSC tab.
Then turn your phone off, once it's completely off, hold Power + Home + Volume Down, it'll ask Continue or Cancel, press Volume Up to Continue. You'll be in Odin / Downloading mode, from here, just connect your phone to your PC, flash the Odin files, the phone will reboot itself a few times, not to worry, and it'll eventually boot to the marshmallow start screen.
As for grabbing Odin, I'd recommend the latest version 3.12.3, it supports the newest devices up to S7 and S7 Edge, and it has all the bug fixes as well, so it should work fine on your phone. Link here: http://forum.xda-developers.com/android/software/odin-3-12-3-worlds-att-s7-odin-firmware-t3401470
Good luck.
Click to expand...
Click to collapse
Epic. If I take it back to 2BPE6 successfully, I'm guessing it's then just the same process to push up to 6.0.1 and beyond?
dmlargo said:
Epic. If I take it back to 2BPE6 successfully, I'm guessing it's then just the same process to push up to 6.0.1 and beyond?
Click to expand...
Click to collapse
Nope, that was the process I described initially that required you to flash 2BP2 First and then onwards to Marshmallow.
The file I've linked (2BPE6) isn't an OTA. It's the entire full ROM file for the 6.0.1 update for the N920A. Once you flash this and the phone reboots, it'll go directly to Marshmallow.
murtaza02 said:
Nope, that was the process I described initially that required you to flash 2BP2 First and then onwards to Marshmallow.
The file I've linked (2BPE6) isn't an OTA. It's the entire full ROM file for the 6.0.1 update for the N920A. Once you flash this and the phone reboots, it'll go directly to Marshmallow.
Click to expand...
Click to collapse
And, more importantly, I'll hopefully have a standardised stack across csc, PDA and what not.
Like I said in op - there's unsurprisingly a lot of talk out there about note 5 on at&t when it comes to updates. I'd hoped because mine was already rooted and had a CHN / TGY csc that it kind of showed if someone in China had done stuff to it, and it still worked, then there was a possibility of moving it to 6.0.1
I'll get all files together along with your notes and have a go after getting a nandroid back up. Might be a while given time of year though.
Nice one
dmlargo said:
And, more importantly, I'll hopefully have a standardised stack across csc, PDA and what not.
Like I said in op - there's unsurprisingly a lot of talk out there about note 5 on at&t when it comes to updates. I'd hoped because mine was already rooted and had a CHN / TGY csc that it kind of showed if someone in China had done stuff to it, and it still worked, then there was a possibility of moving it to 6.0.1
I'll get all files together along with your notes and have a go after getting a nandroid back up. Might be a while given time of year though.
Nice one
Click to expand...
Click to collapse
The CSC and everything will go back to the default ATT one and it'll have no trace of ever being a fake N920F.
Everything will show N920A and you may also have a bit of AT&T bloat ware, most of which can be disabled.
But the main point is that the phone will no longer be modified in any way and will be completely stock.
murtaza02 said:
The CSC and everything will go back to the default ATT one and it'll have no trace of ever being a fake N920F.
Everything will show N920A and you may also have a bit of AT&T bloat ware, most of which can be disabled.
But the main point is that the phone will no longer be modified in any way and will be completely stock.
Click to expand...
Click to collapse
But doesn't that mean it'll be region locked / potentially losing network connection?
dmlargo said:
But doesn't that mean it'll be region locked / potentially losing network connection?
Click to expand...
Click to collapse
Nope. Once it's unlocked, it's always unlocked.
I live in Pakistan, American carrier phones are very common here. AT&T, Verizon, T-Mobile and Sprint, all the variants of Note 5 are available here and I've flashed updates on a friends AT&T Note 5 and it didn't get re-locked. I've flashed a T-Mobile Note 4 and 5, neither got re-locked.
Point being, that re-locking crap only used to happen on phones that were unlocked using a glitch or a software based unlock.
murtaza02 said:
Nope. Once it's unlocked, it's always unlocked.
I live in Pakistan, American carrier phones are very common here. AT&T, Verizon, T-Mobile and Sprint, all the variants of Note 5 are available here and I've flashed updates on a friends AT&T Note 5 and it didn't get re-locked. I've flashed a T-Mobile Note 4 and 5, neither got re-locked.
Point being, that re-locking crap only used to happen on phones that were unlocked using a glitch or a software based unlock.
Click to expand...
Click to collapse
Cool. I'll have a look this weekend. Fingers crossed.
After that I'll have a go a re-rooting using something similar to: https://www.search4roots.com/how-to-easily-root-samsung-galaxy-note-5-sm-n920a-marshmallow-6-0-1/
murtaza02 said:
I happened to come across the 2BPE6 Marshmallow ROM file for the N920A Note 5.
Here's the link: https://mega.nz/#!8Ep0DRZA!jXd4QtMcmN47QIOQSHV8h0CqAc7aVMB5aR4VA_Zw1Pw
You can flash it with Odin, a bit easier to use than ADB, so it'll be better for you as well.
The file is zipped, once you extract it, there'll be 4 different files, one containing system and the main ROM, the other will contain the BL (Bootloader), another with the modem (Radio) and the last with the CSC (Customer Sales Code). Match each file to it's respective field in Odin, the BL file will have BL in the filename so add the BL file to the BL tab in Odin, the CP file to the CP tab, the AP file to the AP tab and the CSC file to the CSC tab.
Then turn your phone off, once it's completely off, hold Power + Home + Volume Down, it'll ask Continue or Cancel, press Volume Up to Continue. You'll be in Odin / Downloading mode, from here, just connect your phone to your PC, flash the Odin files, the phone will reboot itself a few times, not to worry, and it'll eventually boot to the marshmallow start screen.
As for grabbing Odin, I'd recommend the latest version 3.12.3, it supports the newest devices up to S7 and S7 Edge, and it has all the bug fixes as well, so it should work fine on your phone. Link here: http://forum.xda-developers.com/android/software/odin-3-12-3-worlds-att-s7-odin-firmware-t3401470
Good luck.
Click to expand...
Click to collapse
I had a very similar situation ( AT&T re-custom Note5 ) , followed the procedure and everything went straight
so thanks to both of you for this thread and pretty straight guide
really
the only "issue" is that quite many thing ( graphically speaking ) changed from Lollipop , not in a "good" way , and I'm not sure wheter they're supposed to change for Marshmallow or for the AT&T bloatware/customization ..what is sure is that the phone was running bit cleaner before . ( i.e. no extra icons , no recording or "AT&T video call " icon available on phonecall screen when calling ..just an example among some things i noticed besides some at&t apps in the home screen )
is there a way to know it and to remove any of it , besides rooting the phone ? - which I'm not sure can be done on a n920a
boodi said:
I had a very similar situation ( AT&T re-custom Note5 ) , followed the procedure and everything went straight
so thanks to both of you for this thread and guide
the only thing is that quite many thing ( graphically speaking ) changed from Lollipop , not in a "good" way , and I'm not sure wheter they're supposed to change for Marshmallow or for the AT&T bloatware/customization
is there a way to know it and to remove any of it , besides rooting the phone ? - which I'm not sure can be done on a n920a
Click to expand...
Click to collapse
Package Disabler Pro. It's a paid app. You can use it to disable (not remove) some bloatware that's preinstalled by Samsung and AT&T.
No root possible, so you can't remove the apps.
Sent from my SM-G935F
Hi All,
I am a newbie to the root world and in a lapse of judgement I decided to root my phone a year or so back. Naturally I had no idea what I was doing but I think I sort of did it. Now my phone is in this weird root limbo where it is rooted but not really. I can't unroot with supersu it just gives me an error or keeps spinning and does nothing. On boot my phone says Custom which tells me it is kind of rooted and some apps wont work as it says my phone has been modified or has root access. Also my updates fail but I have never quite gotten full root access and things just act weird. I guess that's what I get.... So naturally I have come full circle and would like to remove root and just install a stock rom so I can receive updates on this thing. Also, I am terrified of bricking it. I have searched all over your forum and found 18 versions of 15 roms with 13 ways to do it and I have no clue which way is the correct way. I know baseband plays a role along with version. So here is what I have;
Model: (AT&T)
SAMSUNG-SM-N900A
Android Version:
4.4.2
Baseband Version:
N900AUCUCNC2
Kernel Version:
3.4.0-722276
I hope I didn't miss anything. Some clarity on this matter would be most appreciated and I want to thank anyone for helping me. I hope this post isn't a repeat of some previous post. I tried looking but some details were slightly different. Please help and thank you in advance.
Joshua
Schrodinger's root
Aside from the fact that NC2 (that's really all the information you need - NC2 for the N900A - isn't currently listed at SamMobile, that's really all you need. Once you download the firmware, you just use Odin to flash it to the phone. I'm about to leave the house or I'd upload it to Mega and give you a link to use to download it (if you trust me - it's exactly the firmware I downloaded from SamMobile when they had it up a few years ago.) Post here if you want me to and I will. Or just look around this forum (AT&T Samsung Galaxy Note 3) for an NC2 link. (You'll be updated over the air, to 5.0.1, if you're not rooted, though, so you could use an unrooted OC1 or OC2 firmware, which are here (somewhere). (Oc1 and OC2 are the Lollipop ROMs.)
Edit:
Walter has a link to the OC1 (Lollypop) ROM at https://forum.xda-developers.com/note-3-att/general/100-stock-lollipop-5-0-n900aucueoc1-t3069609 You probably want to back everything up, then use the 4-file version. Then you can restore everything except root.
Ok... So where to begin...
I've searched the threads for a few days now and tried several flashing methods and tools, but I'm having no luck. So please bare with me, and I will get into it...
I recently purchased a new Note 9 international unlocked model. I was super excited and ready to get it running. Except, I started it up and then no Bixby Voice. Unlike most, I prefer to use it and find it helpful to me regularly, so I'd like to keep it. Anyway, when pressing the button I received the much noted "Bixby Voice is not available in your country" message. Well, I found from Samsung support live chat, that this is because of two reasons. One, I currently live in Japan. Two, the phone is a Singapore model phone. My immediate thought was "Oh, ok well, I'll just flash it with another country's firmware then". Seemed easy enough. I flashed it with firmware baring an OXM csc, and after booting up I noticed the the VoLTE feature that was not select-able before was now able to turned on. "Ooow, extra win!" I thought, but of course same issue with bixby. So I searched and found a csc for a location that has bixby is available and is also a carrier unlocked Exynos chipset firmware (XEU). I flashed this, but guess what... still no Bixby Voice. Frustrated, I began looking into changing the Sales code. Using the *#272*IMEI# code and found that MM1 was the sales code for some reason. I changed this to XEU and the phone rebooted. I restored and then tried Bixby Voice again... same. Except, I noticed I also lost the VoLTE option completely. It doesn't even show in the menu bar anymore. I tried the code again to change the sales code back, but now I get error "Connection problem or invalid MMI code." So now, I lost that too. "To hell with it", I thought. I'll flash it back to the old firmware... nope. Now I get:
SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1
This will sometimes change slightly if I try to flash a single part of the new firmware, BL, AP, CSC, etc...
I have done some research and found via the serial number that the firmware I should have installed is: N960FXXU1ARH5_N960FOXM1ARGD_N960FXXU1ARGC_N960FXXU 1ARH5_XSP (according to the Chimera Mobile tool)
I've obtained this, but I still get the same Revision error. I found that the one last one I successfully flashed is a newer version than the others. So now what can I do? Is it possible I can just manually manipulate the CSC details? I rooted the phone and got ES Explorer going, set all the access rights to R/W but I cant find the /System/CSC folder that people keep going on about. Did they do away with that on the Note 9?
It looks like I also have some regional troubles with the Play store too.
WTH... I'm really not sure what to do here. Can anyone please help? I'll be satisfied if I can just get it back to the stock firmware...
Decoding SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1 come out to: Software Revision check fail, you have 2 and it's expecting 1.
That does indeed sound like you've installed a newer version and it's not letting you roll back the device. You may now need to wait for Singapore's stock firmware to be updated to the same or newer and get a copy of that.
who uses bixby use google assistant for peats sake!!!"!!!!
willhemmens said:
Decoding SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1 come out to: Software Revision check fail, you have 2 and it's expecting 1.
That does indeed sound like you've installed a newer version and it's not letting you roll back the device. You may now need to wait for Singapore's stock firmware to be updated to the same or newer and get a copy of that.
Click to expand...
Click to collapse
Hi willhemmens! Thanks for replying back.
I was also speculating the same thing about having to wait for the revision, but I know the people here are significantly more knowledgeable, so I thought I'd try to pick some brains. My first though was that there must be something in one of the package files that identify to the phone what "version" it is, and then perhaps that can be modified and then re-packaged. But if that were the case, this would be the best place on the planet to verify that. I have tools to un-package and repackage, maybe I'll make a duplicate copy and tinker around in it.
It looks like everyone is complaining about it. It's been a while since I rooted a device (7 years maybe?), so I hadn't realized Samsung took a dump in the downgrade pool. I also found some other new 'glorious' features they've graced us with-after the fact of course. Now, when I un-root... it's still flagged as modified! Woohoo. ....Fricken' KNOX. Now all of the nifty Samsung apps are blocked. Is it just me, or has Samsung turned a little extra Ass-hat recently?
Anyway, I guess I'll have to deal with this lame iOS quality version of Oreo until then... By the way, off the top of your head do you know where I can go to keep an eye out for that update to happen? All I know is SamMobile.com
Thanks again.
mikey_sk said:
who uses bixby use google assistant for peats sake!!!"!!!!
Click to expand...
Click to collapse
Hi Mikey! Yeah, I suppose your right. I've just been using it a lot and have gotten accustomed to it. Plus I enjoy creating my own custom Bixby voices, attitudes, and responses. Bixby on my Note 8 has split personality.
Luckily she doesn't randomly laugh in the dark like Alexa. If she did she'd fly out the window like a Note 7.
csc was omc and now odm.
bober10113 said:
csc was omc and now odm.
Click to expand...
Click to collapse
HI Bober10113! Thanks for your reply. I was able to find my way there, but It seems the csc feature files are encrypted now. I'm still looking through the threads for something about how to decrypt/encrypt them, but I haven't found anything yet.
VetteMike69 said:
HI Bober10113! Thanks for your reply. I was able to find my way there, but It seems the csc feature files are encrypted now. I'm still looking through the threads for something about how to decrypt/encrypt them, but I haven't found anything yet.
Click to expand...
Click to collapse
Actually, I just found a video on YouTube where Yakapa40 is able to unpack the xml files using some "cscfeature" executable.
@yakapa40
Is there any chance you might be willing to share your "cscfeature.exe" file for unpacking the feature XML files in the CSC?
VetteMike69 said:
Actually, I just found a video on YouTube where Yakapa40 is able to unpack the xml files using some "cscfeature" executable.
@yakapa40
Is there any chance you might be willing to share your "cscfeature.exe" file for unpacking the feature XML files in the CSC?
Click to expand...
Click to collapse
Ah sorry, nevermind... I was able to make a ps1 for it instead. I'm good one decoding and encoding the XMLs now.
@VetteMike69
if you need it , you have an automatic encode/decode feature here in post 5 : https://forum.xda-developers.com/galaxy-note-9/how-to/n960f-n960n-n960u-n960u1-n960w-n9600-t3833721
regards
edit : sorry no licence , but you can make your own patch file
yakapa40 said:
@VetteMike69
if you need it , you have an automatic encode/decode feature here in post 5 : https://forum.xda-developers.com/galaxy-note-9/how-to/n960f-n960n-n960u-n960u1-n960w-n9600-t3833721
regards
Click to expand...
Click to collapse
you made the exe with freeware(advance bat to exe converter)that only works on your PC. read the software policy.. its clearly written that what you compile only works on 1 computer.
anyways for everyone else, here is a proper tool:
https://1drv.ms/f/s!AhXVLDDj8g3Agdl8B0jk3H1dqccrXw
bober10113 said:
you made the exe with freeware(advance bat to exe converter)that only works on your PC. read the software policy.. its clearly written that what you compile only works on 1 computer.
anyways for everyone else, here is a proper tool:
https://1drv.ms/f/s!AhXVLDDj8g3Agdl8B0jk3H1dqccrXw
Click to expand...
Click to collapse
Hi bober, don't know where else to post this, so posting it here...I have seen a bunch of your posts and it seems you've figured out a way to use Canadian CSC on the 960 F/DS...i have a few questions:
1- First step is install TWRP?
2- then root?
3- do I have to change the actual firmware of the device? Mine is a singapore unit
4- Once I change CSC, how are updates handled after that if I want to keep using stock firmware?
5- If I can't do OTA, then how will I update to the latest version and security patches? Do I download these for the Canada version? or the Singapore version?
Any help would be highly appreciated!!
hkalltheway said:
Hi bober, don't know where else to post this, so posting it here...I have seen a bunch of your posts and it seems you've figured out a way to use Canadian CSC on the 960 F/DS...i have a few questions:
1- First step is install TWRP?
2- then root?
3- do I have to change the actual firmware of the device? Mine is a singapore unit
4- Once I change CSC, how are updates handled after that if I want to keep using stock firmware?
5- If I can't do OTA, then how will I update to the latest version and security patches? Do I download these for the Canada version? or the Singapore version?
Any help would be highly appreciated!!
Click to expand...
Click to collapse
i think you should weigh in what you want to achieve by changing csc and if it really is worth rooting for.
i rooted for custom roms, sound mods and just sheer control over my device.
but this comes with a price:
no samsung pay ( yet)( can always unroot)
tripped knox fuse, so probably no warranty. depends.(once tripped, this cannot be reverted)
misc apps detect root and might no longer root.(can always unroot)
so you should read up and get informed on what you need and if you need root/twrp.
concerning updates once rooted:
either use custom roms. BL and CP can be manually updated via stock firmware while custom rom keeps the system up to date.
or flash full stock firmware each time then re-root.
in both cases above, firmware files to be used are for exynos F devices. forget the canadian firmware, you cant flash that since it's for snapdragon devices.
yakapa40 said:
@VetteMike69
if you need it , you have an automatic encode/decode feature here in post 5 : https://forum.xda-developers.com/galaxy-note-9/how-to/n960f-n960n-n960u-n960u1-n960w-n9600-t3833721
regards
edit : sorry no licence , but you can make your own patch file
Click to expand...
Click to collapse
Hi @yakapa40!
Thank you, this looks like it'll be a bit more convenient than the one I made previously. I'll put it on record for next time. Luckily I was able to find what prevented me from flashing the older revision CSC and modify that. So now I was able to use Odin to drop down my PDA and CSC while keeping the newer Bootloader and Baseband. I guess it's a bit of a Frankin'-Firm now. Whats weird though, is that now my knox sometimes shows tripped and sometimes doesn't; sometimes root checker fails and sometimes it passes.
I wonder if I grazed on something that's related to the knox handler... Nagh... probably just wishful thinking. Still weird though.
bober10113 said:
i think you should weigh in what you want to achieve by changing csc and if it really is worth rooting for.
i rooted for custom roms, sound mods and just sheer control over my device.
but this comes with a price:
no samsung pay ( yet)( can always unroot)
tripped knox fuse, so probably no warranty. depends.(once tripped, this cannot be reverted)
misc apps detect root and might no longer root.(can always unroot)
so you should read up and get informed on what you need and if you need root/twrp.
concerning updates once rooted:
either use custom roms. BL and CP can be manually updated via stock firmware while custom rom keeps the system up to date.
or flash full stock firmware each time then re-root.
in both cases above, firmware files to be used are for exynos F devices. forget the canadian firmware, you cant flash that since it's for snapdragon devices.
Click to expand...
Click to collapse
Hi @hkalltheway!
Bober10113 is absolutely right on this. Really, you need to know what exactly you are rooting the device for. If you don't have a set reason, it may be better not to root it. You can flash stock firmware and CSC all day long without needing a root. But if you want to customize the features (there's not really a lot right now by the way) and setup custom menus, layouts, or run CFW... Then you'll have to go the way of rooting. But again, there is currently no definitive way to "untrip" your knox. As he said, you can "unroot" but you cannot "technically" regain your unmodified status; even though you can revert back to a stock rom. By loosing this status you loose access to Pay, Secure Folder, and a few other things. I think there is a mod out there to get Samsung Health working again, but as far as I'm currently aware, that's the only one you can re-gain. Most of them validate against your knox value.
Regarding your questions.
YES! You should always install TWRP first before doing any 'messin'. This is your ultimate line of recovery and the best mulligan your gonna get from your device. Always follow the two step wonder on this:
1. Install TWRP
2. Boot into TWRP and create a full backup of your partitions (Before anything else). I do this to the SD card in the tray. That way it's always handy.
After this, feel free to play around, but keep in mind what versions/revisions your flashing. If you jump to a new one, it's not easy to downgrade -it'll take hours to download and rewrite the firmware you need and trick the phone into thinking it's flashing the latest update.
Regarding a changed CSC and the updates... You should have no problem getting updates. But Samsung sends out updates to devices based on the CSC. So, if you flash the CSC, the updates you get will come at the same time interval of the country and location of the CSC that you flashed. For example, you have a Sin model with Sin CSC just like me, but if you flash to a UK CSC, then you will get your updates at the same time that the UK get their updates. Etc, Etc...
For the OTA Updates, if your on a stock firmware you should get these fine. If they do not automatically update you can just tap the update button manually in settings to check for new updates and then download them. Some have said you need to turn off automatic updates, and some say you do not. This, I'm not 100% sure on this one. Also, you can manually update by flashing the newest version through Odin as the come in. Usually SamMobile.com is good about keeping up to date firmware that you can download with all 4 packs, nicely labeled for you.
Hopefully that helps you out a bit.
VetteMike69 said:
Hi @hkalltheway!
Bober10113 is absolutely right on this. Really, you need to know what exactly you are rooting the device for. If you don't have a set reason, it may be better not to root it. You can flash stock firmware and CSC all day long without needing a root. But if you want to customize the features (there's not really a lot right now by the way) and setup custom menus, layouts, or run CFW... Then you'll have to go the way of rooting. But again, there is currently no definitive way to "untrip" your knox. As he said, you can "unroot" but you cannot "technically" regain your unmodified status; even though you can revert back to a stock rom. By loosing this status you loose access to Pay, Secure Folder, and a few other things. I think there is a mod out there to get Samsung Health working again, but as far as I'm currently aware, that's the only one you can re-gain. Most of them validate against your knox value.
Regarding your questions.
YES! You should always install TWRP first before doing any 'messin'. This is your ultimate line of recovery and the best mulligan your gonna get from your device. Always follow the two step wonder on this:
1. Install TWRP
2. Boot into TWRP and create a full backup of your partitions (Before anything else). I do this to the SD card in the tray. That way it's always handy.
After this, feel free to play around, but keep in mind what versions/revisions your flashing. If you jump to a new one, it's not easy to downgrade -it'll take hours to download and rewrite the firmware you need and trick the phone into thinking it's flashing the latest update.
Regarding a changed CSC and the updates... You should have no problem getting updates. But Samsung sends out updates to devices based on the CSC. So, if you flash the CSC, the updates you get will come at the same time interval of the country and location of the CSC that you flashed. For example, you have a Sin model with Sin CSC just like me, but if you flash to a UK CSC, then you will get your updates at the same time that the UK get their updates. Etc, Etc...
For the OTA Updates, if your on a stock firmware you should get these fine. If they do not automatically update you can just tap the update button manually in settings to check for new updates and then download them. Some have said you need to turn off automatic updates, and some say you do not. This, I'm not 100% sure on this one. Also, you can manually update by flashing the newest version through Odin as the come in. Usually SamMobile.com is good about keeping up to date firmware that you can download with all 4 packs, nicely labeled for you.
Hopefully that helps you out a bit.
Click to expand...
Click to collapse
phone info tool and other root detect apps are notorious for reporting wrong Knox status.....
he wants a csc from a snapdragon to a exynos. so flashing csc from SD in odin is ill advised. so it will require root and files be either manualy modded or i have updated tkkg1994 csc pack to work on note 9. ive only added canadian region.
https://1drv.ms/u/s!AhXVLDDj8g3AgdkwkPIxwDu5ZFASuQ
in twrp backup:
EFS
carrier files
then flash zip.
i wont be held responsible for anything. Ive tested on my N960N.
should work on any F or FD/DS too.
all credits to tkkg1994.
bober10113 said:
phone info tool and other root detect apps are notorious for reporting wrong Knox status.....
he wants a csc from a snapdragon to a exynos. so flashing csc from SD in odin is ill advised. so it will require root and files be either manualy modded or i have updated tkkg1994 csc pack to work on note 9. ive only added canadian region.
https://1drv.ms/u/s!AhXVLDDj8g3AgdkwkPIxwDu5ZFASuQ
in twrp backup:
EFS
carrier files
then flash zip.
i wont be held responsible for anything. Ive tested on my N960N.
should work on any F or FD/DS too.
all credits to tkkg1994.
Click to expand...
Click to collapse
Thanks for the help guys! The only reason I wanted root was for having VoLTE and Wifi calling working in Canada. One more reason is titanium backup so I can back up the device completely so it's easy to restore. Finally, I was curious how the scene is now and what else I can play with in magisk, as I've never used it. Thanks!
hkalltheway said:
Thanks for the help guys! The only reason I wanted root was for having VoLTE and Wifi calling working in Canada. One more reason is titanium backup so I can back up the device completely so it's easy to restore. Finally, I was curious how the scene is now and what else I can play with in magisk, as I've never used it. Thanks!
Click to expand...
Click to collapse
well then root might be food for you.
have a read at Dr Ketan roms thread for the root procedure and details of what it involves.
hkalltheway said:
Thanks for the help guys! The only reason I wanted root was for having VoLTE and Wifi calling working in Canada. One more reason is titanium backup so I can back up the device completely so it's easy to restore. Finally, I was curious how the scene is now and what else I can play with in magisk, as I've never used it. Thanks!
Click to expand...
Click to collapse
what is your carrier?
because Rogers blacklists non carrier phones. i believe bell might also do that too. So even if all is there and options appear, your phones imei code will be blocked from enrolling for wifi calling.
bober10113 said:
what is your carrier?
because Rogers blacklists non carrier phones. i believe bell might also do that too. So even if all is there and options appear, your phones imei code will be blocked from enrolling for wifi calling.
Click to expand...
Click to collapse
I'm currently with fido but thinking of switching to freedom mobile. Still too worried about all this rooting stuff that it seems the best thing to do is stay away from now and choose from one of the 2:
1- use wifi calling / VoLTE by getting the rogers/fido phone directly; that phone will not have dual sim capability
2- forget wifi calling / VoLTE and use this dual sim version, which has a lot of advantages while traveling
Seems like I'll stick to the 2nd option for now. Thanks for the help!
Hi all. Succesfully rooted my S8 Tab Ultra and was running fine for the past week.
Just rebooted the tablet and its showing "Custom Binary(boot) Blocked due to remaining installment balance" I've read around the forum and apparently its for people who haven't paid for the device fully which I have, paid in full on pre order.
The only way it seems to get it to boot is to flash the original firmware my model is SM-X900NZAFXAR and I can't find the firmware does anyone know how I can get the tablet to boot?
Tried Samsung support but they didn't help
Hello! Get SamFirm at https://samfirmtool.com/ (v0.5.0 is the latest), for model put SM-X900, for Region put XAR. I haven't received mine yet (not until the middle of next month), but this is the closest I could find to what should be the correct firmware. Click "Check Update", then click "Download". It's been too long for me away from Samsung - I don't remember if it matters if you let it decrypt automatically or not. The answer should become apparent, though. At worst, you'll just have to redownload the firmware with the option to decrypt unchecked in SamFIrm.
You can check your CSC (Region) by (copying/pasting someone else's instructions):
go to settings - about - software information - service provider SW ver. The region code (CSC) will be written there.
I don't know if your CSC will match XAR. I don't find anything for XAA or XAS yet in SamFirm.
Good luck! This is concerning since I had planned on rooting mine.
Thanks for the reply. I've downloaded the XAR firmware but now I have another problem getting the USB device not recognised. Device descriptor request failed. Tried locking the bootloader again now its stuck with a Hash fail on boot and wont turn off. Can't unlock the bootloader again. 99% sure its not the laptops fault its the one i rooted on but will try another pc tomorrow. Will have to try Samsung again as although I have rooted which voids warrenty its there mistake on my device thinking it has finance outstanding that has caused the failure.
Cheers
Jono0907 said:
Thanks for the reply. I've downloaded the XAR firmware but now I have another problem getting the USB device not recognised. Device descriptor request failed. Tried locking the bootloader again now its stuck with a Hash fail on boot and wont turn off. Can't unlock the bootloader again. 99% sure its not the laptops fault its the one i rooted on but will try another pc tomorrow. Will have to try Samsung again as although I have rooted which voids warrenty its there mistake on my device thinking it has finance outstanding that has caused the failure.
Cheers
Click to expand...
Click to collapse
You got the latest Samsung drivers installed, as linked to in the SamFirm\Samsung Driver subfolder? (link leads to https://samsungusbdriver.com/category/download)
Wait... Is OEM Unlock still enabled in Dev Options? It might be salvageable even though you have locked the bootloader...
Thank you edor for the help the tablet is running again now however it is unrooted now and the OEM unlock option is missing. The USB fault was resloved using a different PC not sure whats going on with my laptop.
Once in download mode i was able to download the XAR version of the Tab S8 Ultra fimrware from SamFirm and reflash with Odin which brought it back.
I'm not sure if running XAR csc will cause problems? I am in the UK I think my csc originally was OXM which is the universal one but cant find an OXM version at the moment.
fkofilee I actually locked the bootloader from the download mode menu which i shouldnt have. I don't have the option now so think I need to wait for the OEM unlock to show in settings.
For anyone else who has the "Custom Binary(boot) Blocked due to remaining installment balance" Need to reflash back to original firmware to boot and apparently it will re-check in 7 days so cannot be rooted in that time.
I have an open ticket with Samsung to try and find out why my tablet thinks it has finance. The confirmed on the phone that it was paid in full.
I wonder if the S7 Bootloader that i rooted had anything to do with it. Will retry with the bootloader when i can and report back.
@Jono0907 I'm glad you got it back working. I apologize if the XAR firmware has anything to do with your OEM unlocking not being available. Thank you for the advice for myself and for others to follow if we encounter the same problem. You had used the S7 bootloader? I would expect that to be the problem but as I said, I'm rusty on Samsung, and totally unexperienced in Samsung tablets - I only know what I've read in this section so far.
My tablet is working because of your advise so I'm happy. Found the EUX firmware which feels like it should be what my tablet should be running so will flash that and see if Unlock comes back. Tried all the tricks with date/time to try and trick it but no luck.
Also was going to add my experience with Samsung support. He agreed that if the tablet was wrongly reporting it was in finance then it wouldn't have been my fault but also said Samsung would not help because I had rooted the device. He didnt talk about reflashing firmware just said that I needed to send it to them for a new motherboard to repair Knox at a cost of at least $400(£300)
I planned to root s8 ultra, now afraid. So, is it safe to root it, and can someone put here whole procedure?
Many thanks
It's pretty much always safe because you can go back to "Download Mode" and reflash the original firmware.
It will however trip Knox which is Samsungs securityh (Done by breaking a physical fuse on the motherboard) which cannot be undone. This voids the warrenty and could cause problems with Google Pay and other things.
The basic process for rooting the S8 is
1. The process requires OEM Unlocking which some carriers in USA seem to be blocking. If you can OEM unlock it will be an option within the developers options in settings. Sometimes it doesn't show up right away.
2. Download SamFirm and get the firmware for your device. The Model for the Non-5G Tab S8 is SM-X900 and put in the CSC code for your region. Samsung simplified CSC codes before the release of the Tab S8 so you can see the list on wikipedia when searching for the tablet it is probably better to look up how to check your CSC code on your tablet to make sure you are getting the right one.
3. Install Magisk Manager on your tablet. Extract the firmware and copy the AP file to your tablet. Open Magisk Manager and point it at the AP file that you copied. Once complete it should give you a Magisk Patched file copy it back to your computer.
4. Install Odin and Samsung USB drivers. In Odin Select the Magisk Patched file for AP then add the BL file that you downloaded from SamFirm and the CSC file. (This will factory reset the tablet). You can leave CP and Userdata blank.
5. Reboot the tablet into Download Mode. This can be done by powering it off connecting it the the PC and when you see the charge symbol hold down Volume up and Volume down till you get to the Download Mode Menu. From here you need to press the option for OEM Unlock and then go to the download screen. Now press start in Odin.
That's pretty much it
ivanox1972 said:
I planned to root s8 ultra, now afraid. So, is it safe to root it, and can someone put here whole procedure?
Many thanks
Click to expand...
Click to collapse
I want clearly explanation, I don't know about this.
Jono0907 said:
It's pretty much always safe because you can go back to "Download Mode" and reflash the original firmware.
It will however trip Knox which is Samsungs securityh (Done by breaking a physical fuse on the motherboard) which cannot be undone. This voids the warrenty and could cause problems with Google Pay and other things.
The basic process for rooting the S8 is
1. The process requires OEM Unlocking which some carriers in USA seem to be blocking. If you can OEM unlock it will be an option within the developers options in settings. Sometimes it doesn't show up right away.
2. Download SamFirm and get the firmware for your device. The Model for the Non-5G Tab S8 is SM-X900 and put in the CSC code for your region. Samsung simplified CSC codes before the release of the Tab S8 so you can see the list on wikipedia when searching for the tablet it is probably better to look up how to check your CSC code on your tablet to make sure you are getting the right one.
3. Install Magisk Manager on your tablet. Extract the firmware and copy the AP file to your tablet. Open Magisk Manager and point it at the AP file that you copied. Once complete it should give you a Magisk Patched file copy it back to your computer.
4. Install Odin and Samsung USB drivers. In Odin Select the Magisk Patched file for AP then add the BL file that you downloaded from SamFirm and the CSC file. (This will factory reset the tablet). You can leave CP and Userdata blank.
5. Reboot the tablet into Download Mode. This can be done by powering it off connecting it the the PC and when you see the charge symbol hold down Volume up and Volume down till you get to the Download Mode Menu. From here you need to press the option for OEM Unlock and then go to the download screen. Now press start in Odin.
That's pretty much it
Click to expand...
Click to collapse
Succesfully rooted a magisk patched AP. Then later I tried to flash another one with an updated firmware, resulting in a soft brick. Does reflashing unpatched stock rom via Odin wipe all my data? Even if I flash HOME_CSC?
emko7 said:
Succesfully rooted a magisk patched AP. Then later I tried to flash another one with an updated firmware, resulting in a soft brick. Does reflashing unpatched stock rom via Odin wipe all my data? Even if I flash HOME_CSC?
Click to expand...
Click to collapse
Sorry mate never done the HOME CSC flash I've always been happy to wipe the device hopefully someone here knows?
emko7 said:
Succesfully rooted a magisk patched AP. Then later I tried to flash another one with an updated firmware, resulting in a soft brick. Does reflashing unpatched stock rom via Odin wipe all my data? Even if I flash HOME_CSC?
Click to expand...
Click to collapse
Uh-oh. I was just getting ready to update to the latest firmware, Maybe I'll have to wait, see how this plays out.
lloydsw said:
Uh-oh. I was just getting ready to update to the latest firmware, Maybe I'll have to wait, see how this plays out.
Click to expand...
Click to collapse
For what it's worth on my S8 Ultra, I updated from rooted April update to rooted May's update perfectly fine without wiping data. Always do backups, though, things happen.
roirraW edor ehT said:
For what it's worth on my S8 Ultra, I updated from rooted April update to rooted May's update perfectly fine without wiping data. Always do backups, though, things happen.
Click to expand...
Click to collapse
Yup, worked fine on my S8. Sigh of relief!