{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP 3.5.0 - Based upon Android 6.0 :
* Whole new TWRP 3 interface
* Flashable to FOTA for permanent recovery
* Bootable recovery image if required
OFFICIAL DOWNLOADS FOR HUASHAN :
https://twrp.me/sony/sonyxperiasp.html
twrp-3.x.x-x-huashan.img : Official TWRP image
How to install : All informations available on TWRP.me
DEVELOPMENT DOWNLOADS FOR HUASHAN :
https://mega.nz/#F!O51UBCxK!0NYOUEXl4SL_o1Qy3Ownjw
twrp-3.x.x-x-fota-huashan.zip : Flashable TWRP 3 to FOTA installer
twrp-3.x.x-x-boot-huashan.img : Fastboot bootable TWRP 3 image
cleaner-fota-huashan.zip : Flashable FOTA formatter (optional)
HOW TO INSTALL EASILY TO FOTA :
* (Optional) : Download the TWRP bootimage and flash it to boot
fastboot flash boot twrpfilename.img
* Boot to recovery : Enter the Recovery as usual
* Flash to FOTA : Install the TWRP FOTA zip
* (Optional) : Flash the ROM you want
HOW TO INSTALL MANUALLY TO FOTA :
* Bootimage : Download the TWRP bootimage you want to flash
* File storage : Adapt the path and push the file to the device this way :
Code:
adb root
adb wait-for-device
adb push /path/to/recovery.img /tmp/twrp.img
* Flash : Extract the TWRP image to the FOTA partition
Code:
adb shell dd if=/tmp/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
* Reboot to recovery : adb reboot recovery
INFORMATIONS ABOUT TWRP 3 :
* Installation : Simply flash the zip with a working TWRP or CyanogenRecovery
* Known issues : No major issue remaining, but sources open to improvements
* Usage : Built for Marshmallow, works for Lollipop based ROMs too
* More here : http://www.xda-developers.com/twrp-3-0-0-has-arrived/
ADDITIONAL LINKS :
* Easy ADB and Fastboot for unexperienced users :
http://forum.xda-developers.com/showthread.php?p=48915118
Thanks to the TWRP Team
Current local manifest of the TWRP build
Code:
<?xml version="1.0" encoding="UTF-8"?>
<!-- https://github.com/AdrianDC/twrp_development_sony -->
You're so fast, I'll test with CM12.1. Thanks!
Edit : If I already have TWRP 2.8.x it's no require to flash FOTA formater right?
aumAP said:
You're so fast, I'll test with CM12.1. Thanks!
Edit : If I already have TWRP 2.8.x it's no require to flash FOTA formater right?
Click to expand...
Click to collapse
The cleaner is unneeded, flashing is enough.
What I could advise would be to make a final backup
with the one version of TWRP, move it to a computer,
then update to have a way back.
I have restored an old backup with the 3.0.0 version,
so completely doable.
Sent from my Xperia SP using Tapatalk
aumAP said:
You're so fast, I'll test with CM12.1. Thanks!
Edit : If I already have TWRP 2.8.x it's no require to flash FOTA formater right?
Click to expand...
Click to collapse
I have CM13.0 and I had TWRP 2.8.7.0 and I did this :
Flash FOTA cleaner
Reboot to recovery ( CM recovery )
then apply update , TWRP3
reboot
I tried "reboot to recovery" in CM recovery but still it was CM recovery ! I rebooted and tried to boot into recovery using volume keys but still the same !
so I booted into ROM and tried again and it worked !
Thanks Adrian ! <3
I think my English is Really sucks ! am I right ?
Flashed, compatible with 12.1. Haven't used the cleaner
Sent from my Xperia SP using Tapatalk
Just for android 6????
Sent from my Xperia SP
hamed24 said:
Just for android 6????
Sent from my Xperia SP
Click to expand...
Click to collapse
also works with cm12.1, just made an nandroid backup with it, not sure if restore works tho
great work man !! that was fast with the first try it was very messy i thought it was gonna have some problems and will take some time ....tested on cm12.1 it's working and the options are great too with the new 3.0 twrp :good:
and the best thing that is the reboot now fixed and can after done flashing press reboot with no problems unlike the previous one
all i can say is thanks for ur hard work on this device !...
I don't know if is a general problem of TWRP 3.0.0 or not but in other devices in this version of TWRP aroma archives don't work.
Someone confirm this.
so i'm with the helium kernel will this be gone when i flash this ?
Helium kernel is a kernel, TWRP recovery is a recovery, they won't delete each other.
The TWRP recovery will be flashed to the FOTA partition so it can't be lost with kernel / ROM update.
bubbeld said:
so i'm with the helium kernel will this be gone when i flash this ?
Click to expand...
Click to collapse
No
Today I found reboot bug once (again).
aumAP said:
Today I found reboot bug once (again).
Click to expand...
Click to collapse
the same as old one ? pressed reboot then a black screen showed up and nothing happened in the next minute ?
flash- said:
the same as old one ? pressed reboot then a black screen showed up and nothing happened in the next minute ?
Click to expand...
Click to collapse
Yep, I wait about 10 minute but phone don't boot up.
Edit : My first use to flash CM13 (build 02/02) haven't this problem. Problem found in second flash CM13 (build 02/08).
No problem on CM12.1 official 0207 build ! Nice Work Adrian ! TWRP is better with this new theme ! :good: :highfive:
aumAP said:
Yep, I wait about 10 minute but phone don't boot up.
Edit : My first use to flash CM13 (build 02/02) haven't this problem. Problem found in second flash CM13 (build 02/08).
Click to expand...
Click to collapse
i've used it like 4-5 time to flash stuff but all is good ...that's weird i'll try to flash more stuff because i like to flash and to test if twrp gonna do that with me ....hope not
flash- said:
i've used it like 4-5 time to flash stuff but all is good ...that's weird i'll try to flash more stuff because i like to flash and to test if twrp gonna do that with me ....hope not
Click to expand...
Click to collapse
Good for you, Thanks for testing it & I waiting for someone who confirm this bug. :angel:
TWRP 3 with CM12.1 20160208 AdrianDC, with cm12.1 kernel 20160208 AdrianDC and quickboot/gestures addons work very smooth in my xperia SP.
Inviato dal mio Xperia SP con XDA Forums
aumAP said:
Today I found reboot bug once (again).
Click to expand...
Click to collapse
Reboots properly ...(after flashing zip and selecting reboot option)
Thanks for your work @Adrian DC
Sent from my Xperia SP using Tapatalk
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is only for Huawei P9 Lite (VNS)
Code:
OpenKirin presents unofficial TWRP for stock EMUI 5.x with decryption support.
Intended for usage on stock emui 5.x in combination with unlocked bootloader and
modded boot image with disabled dm-verity (depending on what you want to do).
Code:
[COLOR="red"][B]WARNING:[/B] since 3.1.0-2 update we've enabled image flashing to special partitions -
not just /recovery or /boot partition.
That means your device could be bricked in a few seconds if you do not pay attention
or don't know what you're doing. (Noobs please stay away out of this section!)[/COLOR]
Installation Instructions
Code:
1. Enter fastboot mode on unlocked device
2. flash recovery using the following command: fastboot flash recovery twrp-3.1.1-0-venus.img
3. reboot to recovery!
Rooting Methods
Code:
[B][U]1. Official SuperSU (not just 2.82+)[/U][/B]
1. Ensure you are running emui 5.x stock kernel
2. Tick the option "Keep vendor partition mounted" inside OpenKirin Settings
3. download and install [URL="www.supersu.com/download"]official SuperSU[/URL]
4. Enjoy!
[B][U]2. Custom SuperSU[/U][/B]
1. Make sure the device running stock EMUI 5.x boot.img
2. flash this modded SuperSU 2.79: [URL="https://drive.google.com/open?id=0BxWP2gF_0Bd_UmQ2Zm9ZRGxBTUE"]download here[/URL]
3. enjoy root :)
[COLOR="red"][B]NOTE:[/B][/COLOR] this is for every device (except kirin 960 based) running emui 5.x without loop support.
[B][U]3. Magisk[/U][/B]
1. ensure you are running a emui 5.x stock kernel
2. flash magisk
3. enjoy root & safetynet (read note)
[B][COLOR="red"]NOTE:[/COLOR][/B] Magisk Hide is a known problem on Huawei/Honor devices.
Make sure you are not rebooting/turning off your device with Magisk Hide enabled!
You may face a broken fingerprint scanner, do not worry,
simply disable magisk hide and reboot - fps works again!
Downloads
Code:
[LIST]
[URL="https://github.com/OpenKirin/android_device_huawei_venus/releases/download/3.1.1-0/twrp-3.1.1-0-venus.img"][U]download twrp-3.1.1-0-venus.img[/U][/URL]
[/LIST]
FAQ
Code:
Q: What's the code status?
A: 10. June 2017
Q: which P9 Lite models are supported?
A: every model should be supported.
Q: Can i use this TWRP with decrypted /data?
yes, you can! (have a look at the instructions in FAQ)
Q: Can i install LOS or AOSP based roms with this TWRP?
yes, you can! (please follow the installing procedure in the corresponding rom thread)
Q: Can i install Magisk?
A: Since 3.1.1-0 you are able to flash Magisk through TWRP (recovery kernel has been updated)
Q: Does official SuperSU work?
A: Yes, even though chainfire included a fix in his upcomming version,
you can use every version of it, just check the "Rooting Instructions" section.
Q: ETAs?
A: No.
Going back from decrypted -> encrypted?
Code:
1. Format /data inside of TWRP
2. Flash eRecovery & Kernel from your currently installed Stock ROM Build
3. Do a factory reset inside of eRecovery
5. Let device boot up
6. Install your current firmware hw_data package & SuperSU using TWRP again
Want to decrypt? No problem.
Code:
1. Format /data inside of TWRP
2. Flash a kernel with forceencrypt disabled
3. bootup your device
Special Thanks
Code:
* [URL="https://forum.xda-developers.com/member.php?u=2335078"]surdu_petru[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=7354786"]XePeleato[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=220328"]paulobrien[/URL]
XDA:DevDB Information
TWRP, Tool/Utility for the Huawei P9 Lite
Contributors
OldDroid, surdu_petru, XePeleato
Source Code: https://github.com/OpenKirin/android_device_huawei_hi6250
Version Information
Status: Stable
Created 2017-04-12
Last Updated 2017-06-11
Reserved
Changelog
Code:
[B]TWRP 3.1.0-2[/B]
* Add support for NTFS formatted MicroSD crads or OTG drives
* Enabled direct image flashing to special partitions
(be careful when using it - one wrong klick means brick in a second!)
* TWRP is now compatible with AOSP based ROMS (LineageOS)
and decrypted Stock ROMS, transition from Stock to LOS is possible (encrypted -> decrypted).
* Correct versioning - Device version is now comming from the common base.
* 6250-common: switch to common base to ensure full support
[strike][B]TWRP 3.1.0-1[/B]
(never released)[/strike]
[B]TWRP 3.1.0-0[/B]
* initial release
??
I have not tested with recovery twrp here, i have tested it with recovery revolution rc3 of (badwolf). THANK YOU...
Your supersu 2.79 works apparently correctly..merci ..
Have anyone tested this TWRP yet?
pospi69 said:
Have anyone tested this TWRP yet?
Click to expand...
Click to collapse
yes i tested it and it is fully working
Starting with TWRP recovery will be possible to switch to this recovery with the install command?
Thank you
nigol
OldDroid said:
Code:
OpenKirin presents unofficial TWRP for stock EMUI 5.x with decryption support.
Intended for usage on stock emui 5.x in combination with unlocked bootloader and
modded boot image with disabled dm-verity (depending on what you want to do).
Instructions
Code:
1. Enter fastboot mode on unlocked device
2. flash recovery using the following command: fastboot flash recovery twrp-3.1.0-0-hi6250.img
3. reboot to recovery!
Rooting - Special SuperSU
Code:
1. Make sure the device running stock EMUI 5.x boot.img
2. flash this modded SuperSU 2.79: [URL="https://drive.google.com/open?id=0BxWP2gF_0Bd_UmQ2Zm9ZRGxBTUE"]download here[/URL]
3. enjoy root :)
[COLOR="red"][B]NOTE:[/B][/COLOR] this is for every device running emui 5.x without loop support.
Downloads
Code:
[LIST]
[URL="https://github.com/OpenKirin/android_device_huawei_hi6250/releases/download/3.1.0-0/twrp-3.1.0-0-hi6250.img"][U]download twrp-3.1.0-0-hi6250.img[/U][/URL]
[/LIST]
FAQ
Code:
Q: What's the code status?
A: 12. April 2017
Q: anything special in your recovery?
A: yes, it is made for huawei phones and excludes important directories during wiping/factory reset
(like data/hw_init for example)
Q: which P9 Lite models are supported?
A: every model should be supported.
Q: ETAs?
A: No.
Special Thanks
Code:
* [URL="https://forum.xda-developers.com/member.php?u=2335078"]surdu_petru[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=7354786"]XePeleato[/URL]
* [URL="https://forum.xda-developers.com/member.php?u=220328"]paulobrien[/URL]
XDA:DevDB Information
TWRP, Tool/Utility for the Huawei P9 Lite
Contributors
OldDroid, surdu_petru, XePeleato
Source Code: https://github.com/OpenKirin/android_device_huawei_hi6250
Version Information
Status: Stable
Created 2017-04-12
Last Updated 2017-04-12
Click to expand...
Click to collapse
Is it possible to install xposed with this twrp?
maka1105 said:
Is it possible to install xposed with this twrp?
Click to expand...
Click to collapse
There is no Xposed for nougat -,-
pospi69 said:
Have anyone tested this TWRP yet?
Click to expand...
Click to collapse
we never release untested stuff to the public.
nigol said:
Starting with TWRP recovery will be possible to switch to this recovery with the install command?
Thank you
nigol
Click to expand...
Click to collapse
simply flash it via fastboot or from inside twrp (install image method - select recovery partition)
maka1105 said:
Is it possible to install xposed with this twrp?
Click to expand...
Click to collapse
as simo already told you, since when do we have xposed for nougat? Uhh, little addition, please, never quote op :|
I'm using Elite Kernel, is this still usable with a non stock kernel?
zgomot said:
I'm using Elite Kernel, is this still usable with a non stock kernel?
Click to expand...
Click to collapse
depends if it forces decryption or not ..
the recovery won't work on devices without encryption for now (wip, almost ready).
EDIT: just checked, it is compatible with this recovery
OldDroid said:
depends if it forces decryption or not ..
the recovery won't work on devices without encryption for now (wip, almost ready).
EDIT: just checked, it is compatible with this recovery
Click to expand...
Click to collapse
Hello,
I flashed with this recovery and it works well. Btw I tried to root the device (by using provided SuperSu, I flashed it and installed supersu app) but it didn't succeed. The supersu app says it need to update su binary and when continue, the app freezes. Previously I used revolution recovery rc2 with elite kernel v4. Any solution?
Thank you.
P.s.: My device is VNS-L31C636 and I'm using Android 7.0 with EMUI 5.0
eagletdw said:
Hello,
I flashed with this recovery and it works well. Btw I tried to root the device (by using provided SuperSu, I flashed it and installed supersu app) but it didn't succeed. The supersu app says it need to update su binary and when continue, the app freezes. Previously I used revolution recovery rc2 with elite kernel v4. Any solution?
Thank you.
P.s.: My device is VNS-L31C636 and I'm using Android 7.0 with EMUI 5.0
Click to expand...
Click to collapse
rooting method provided only works with stock kernel as elite kernel is pre-patched!
titanium app not restoring any app..... tried with both mount namesapce options,,, same issue which i got in porting phh superuser and same happen with me on v1 build,,,
HassanMirza01 said:
titanium app not restoring any app..... tried with both mount namesapce options,,, same issue which i got in porting phh superuser and same happen with me on v1 build,,,
Click to expand...
Click to collapse
nope, i just checked it, works fine with BusyBox installed. Check "Control Center" - justed backed it up and restored it.
How i can flash SuperSU? i download your files but i do not know how to install this. In twrp i cant see this file :/
Ah :laugh:
Will try to adjust it as i also have working busybox installed by stericson....
Mareczin said:
How i can flash SuperSU? i download your files but i do not know how to install this. In twrp i cant see this file :/
Click to expand...
Click to collapse
You have to change the extension, change .0 to . zip
How's backup in this recovery?
Because when i backed up using revolution recovery, then tried to restore it i lose many apps and functionalities
example: the phone doesn't produce any sound
fm radio app not found
and many more
if someone tried it i want to know
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
WARNING!
TWRP builds version 3.2.1-0 and higher are not compatible with Android Lollipop (5.0/5.1.1) due to SELinux rejection
OFFICIAL DOWNLOADS FOR YUGA :
https://twrp.me/sony/sonyxperiaz.html
twrp-3.x.x-x-yuga.img : Official TWRP image
How to install : All informations available on TWRP.me
DEVELOPMENT DOWNLOADS FOR YUGA :
https://androidfilehost.com/?w=files&flid=202353
twrp-3.2.x-x-yuga.zip : Flashable TWRP 3 to FOTA installer
twrp-3.2.x-x-yuga.img : Fastboot bootable TWRP 3 image
cleaner-fota-yuga.zip : Flashable FOTA formatter (optional)
HOW TO INSTALL EASILY TO FOTA :
* (Optional) : Download the TWRP bootimage and flash it to boot
fastboot flash boot twrpfilename.img
* Boot to recovery : Enter the Recovery as usual
* Flash to FOTA : Install the TWRP FOTA zip
* (Optional) : Flash the ROM you want
HOW TO INSTALL MANUALLY TO FOTA :
* Bootimage : Download the TWRP bootimage you want to flash
* File storage : Adapt the path and push the file to the device this way :
Code:
adb root
adb wait-for-device
adb push FullPathToTheRecovery.img /tmp/twrp.img
* Flash : Extract the TWRP image to the FOTA partition
Code:
adb shell dd if=/tmp/twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
* Reboot to recovery : adb reboot recovery
ADDITIONAL LINKS :
* Easy ADB and Fastboot for unexperienced users :
https://forum.xda-developers.com/showthread.php?p=48915118
Thanks to the TWRP Team
Current local manifest of the TWRP build
Code:
<?xml version="1.0" encoding="UTF-8"?>
<!-- https://github.com/fusion3-common/twrp_development_sony -->
Downloadlink is dead
Sent from my [device_name] using XDA-Developers Legacy app
Which ones? https://androidfilehost.com/?w=files&flid=202353
When i type of the Link comes not found
Sent from my [device_name] using XDA-Developers Legacy app
Simon G said:
When i type of the Link comes not found
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
All the download links work, I checked them.
Working for kitkat? I use cusrom exsistenz ultimate
Erick26 said:
Working for kitkat? I use cusrom exsistenz ultimate
Click to expand...
Click to collapse
Yes, this TWRP should work without problems on kitkat.
To all: Please test first official build, based on new device tree(android-7.1) - http://build.twrp.me/twrp-3.2.1-0-yuga.img (not compatible with android 5.0.2/5.1.1)
CyberWalkMaN said:
Yes, this TWRP should work without problems on kitkat.
To all: Please test first official build, based on new device tree(android-7.1) - http://build.twrp.me/twrp-3.2.1-0-yuga.img (not compatible with android 5.0.2/5.1.1)
Click to expand...
Click to collapse
I'm already using that twrp works fine for me
CyberWalkMaN said:
Yes, this TWRP should work without problems on kitkat.
To all: Please test first official build, based on new device tree(android-7.1) - http://build.twrp.me/twrp-3.2.1-0-yuga.img (not compatible with android 5.0.2/5.1.1)
Click to expand...
Click to collapse
New version 3.2.1 same with this?
https://forum.xda-developers.com/xperia-z/development/kernel-ub-t3198491
In new version can use fast charging?
Erick26 said:
New version 3.2.1 same with this?
https://forum.xda-developers.com/xperia-z/development/kernel-ub-t3198491
In new version can use fast charging?
Click to expand...
Click to collapse
This is not kernel, it's only recovery image for FOTA partition
Succesfully flashed the twrp-3.2.1-0-yuga.zip in 3.1.0 recovery.
Installed los 14.1 and gapps successfully and backed up userdata before that, but didnt test much.
TWRP keeps rebooting for me. never had this issue.
Any suggestions?
****EDIT
Os boots perfectly so downloaded TWRP app and the same ISO file and flashed it from the app.
Now it doesn't crash or reboots into TWRP.
CyberWalkMaN said:
This is not kernel, it's only recovery image for FOTA partition
Click to expand...
Click to collapse
link not working
I used the TWRP Manager app to download and install the latest img and flash BUT it has screwed my phone. It looks like the original Sony recovery is now all that is there. I can't reboot into bootloader, I get a blank screen with a blue LED.
I did the adb push in FOTAKernel but my recovery is still broken. How do I adb push into the main bootloader?
thanks
Paul
---------- Post added at 02:21 PM ---------- Previous post was at 02:05 PM ----------
Although recovery is in FOTAKernel and I can boot into the touch screen isnt responding. I am unable to choose anything or unlock it when it locks.
csjjpm said:
I used the TWRP Manager app to download and install the latest img and flash BUT it has screwed my phone. It looks like the original Sony recovery is now all that is there. I can't reboot into bootloader, I get a blank screen with a blue LED.
I did the adb push in FOTAKernel but my recovery is still broken. How do I adb push into the main bootloader?
thanks
Paul
Click to expand...
Click to collapse
I have xperia z android 5.1.1 with unlocked bootloader but not rooted
Now I have done the step:
fastboot flash boot twrp3.0.2.img
My phone is alway in TWRP mode after restart.
In HOW TO INSTALL EASILY TO FOTA :
* Flash to FOTA : Install the TWRP FOTA zip,
1. When can TWRP 3.0.2 FOTA zip be found?
2. In which partition shall it be flashed in TWAP? It seems that I can only see boot partition in TWRP.
TWRP 3.0 Yuga
Hello, I have successfully installed TWRP 3.0 in my xperia z by fastboot with adb, but when rebooting the device, it automatically starts in the twrp, in recovery and does not start the android operative system, there is some solution to this problem
Thank you so much.
Gorkii7 said:
Hello, I have successfully installed TWRP 3.0 in my xperia z by fastboot with adb, but when rebooting the device, it automatically starts in the twrp, in recovery and does not start the android operative system, there is some solution to this problem
Thank you so much.
Click to expand...
Click to collapse
Why are you installing the old 3.0?
Take the current 3.2.2 and your problem will be solved.
TWRP Xperia Z (Yuga)
MichaBit said:
Why are you installing the old 3.0?
Take the current 3.2.2 and your problem will be solved.
Click to expand...
Click to collapse
Hi, I have installed the 3.0, because in this post it says that in the Xperia Z (Yuga) in the versions of android 5.0 and 5.1.1 TWRP is not compatible as of version 3.2.1.0.
That's right?
Thank you so much
my phone won't turn on.
whenever i switch on my phone it get stuck on the animation waves..come back to restart and then it repeats until i rip my battery off of my phone. i know companion can repair my phone. but all the will be lost with that process.
so if anybody can help me with this thing. and i can get my data without losing it.
advice would be most appreciated.
THANKS :fingers-crossed:
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Main Highlights
✪ MTP support
✪ Can flash stock os Images
✪ Backup/restore works with any os
✪ Restore your old twrp backup
✪ Optimized and faster
✪ Build On A29 Pre Built Kernel By Realme
✪ Full compatible with color os
ScreenShots
Download Link:
https://mega.nz/#!5gYnjQSB!YhC_ZTHuopwwP50LxTvJ1VOq4zYSfG0LAudWr6gatUA
Code:
Bugs
:GSI Flashing Has Some Issues
:If You Finds Any Other Bug Then Report Me
Credits;
AnuragRai(Developer)
Hamza(Tester)
RK(Tester)
Jatin(Tester)
MKS(RM2p Dev,Always Supported Me)
And Whole Realme Tester Team
XDA:DevDB Information
TWRP[UNOFFICAL]-BETA-BUILD-[12-03-2019], Tool/Utility for the Oppo Realme 1
Contributors
anurag rai, hamza
Version Information
Status: Beta
Current Beta Version: 01
Beta Release Date: 2019-03-12
Created 2019-03-12
Last Updated 2019-03-12
Flashing Guide
Code:
[CENTER]
:adb reboot bootloader
:fastboot flash recovery recoveryname.img
:reboot phone manually ,not from fastboot
:After phone boots up,power off it
:Press Power Button+Volume UP &Down For Approx 20 seconds
:After You Are Inside Of Twrp,do this
:Wipe-Format Data-Yes And reboot manually by power off the device
:And Press Power Button+Volume UP & Down
:Flash Magisk And Reboot [/CENTER]
Caution
Code:
:Never Reboot directly to recovery by adb or fastboot commands as it will cause soft brick,
:always manually reboot
Reserved
Thankyou bro..
Finally we are getting working twrp recovery for rm 1:highfive: keep up the good work mate
anabhi said:
Finally we are getting working twrp recovery for rm 1:highfive: keep up the good work mate
Click to expand...
Click to collapse
Bro can you help me with fixing reboot to recovery issue
anurag rai said:
Flashing Guide
Code:
[CENTER]
:Wipe-Format Data-Yes And reboot manually by power off the device
:And Press Power Button+Volume UP & Down
:Flash Magisk And Reboot [/CENTER]
Caution
Code:
:Never Reboot directly to recovery by adb or fastboot commands as it will cause soft brick,
:always manually reboot
Click to expand...
Click to collapse
After wiping data and turning off. My phone wont boot. I doesnt even show the logo. Please help.
It's Working ! Thanks Alot Mate.:victory:
awesome work bro.. thnks a lot u r too fast..
Why wiping data ? Also if we wipe data then won't it take time to setup the device after that only we could reboot. And I just need to put some some apps into system, I dont want to flash magisk. Can I just boot into recovery once using fastboot boot twrp.img command /
Awesome man!??
svsexodia said:
Why wiping data ? Also if we wipe data then won't it take time to setup the device after that only we could reboot. And I just need to put some some apps into system, I dont want to flash magisk. Can I just boot into recovery once using fastboot boot twrp.img command /
Click to expand...
Click to collapse
Yes you can
manavkush said:
Flashing Guide
Caution
After wiping data and turning off. My phone wont boot. I doesnt even show the logo. Please help.
Click to expand...
Click to collapse
Charge it bro
Realme 1 - Treble Rom
'TREBLE', let's talk about it.
Realme 1 supports treble, we have unlocked bootloader, a working TWRP, and several Treble Roms available, so why haven't anyone tried flashing a Treble Rom yet on Realme 1? Those are the only things we need to flash a Treble Rom on this device right? Am I missing something?
I don't have a backup phone nor do we have official firmware for Realme 1 to recover from soft brick, so I am not willing to risk my device yet. If someone else could do it instead I would appreciate it a lot.
P.S. Someone should start a pinned thread for 'Realme 1 - Treble Roms'
johndoe5 said:
'TREBLE', let's talk about it.
Realme 1 supports treble, we have unlocked bootloader, a working TWRP, and several Treble Roms available, so why haven't anyone tried flashing a Treble Rom yet on Realme 1? Those are the only things we need to flash a Treble Rom on this device right? Am I missing something?
I don't have a backup phone nor do we have official firmware for Realme 1 to recover from soft brick, so I am not willing to risk my device yet. If someone else could do it instead I would appreciate it a lot.
P.S. Someone should start a pinned thread for 'Realme 1 - Treble Roms'
Click to expand...
Click to collapse
I've Flashed Phh's GSI Treble Roms.All Of Em Seems To Work Fine But Volte Is Not Working On Any Of Em So I Had To Switch Back To Stock. I Tested AOSP 9.0,RR 9.0 And Lineage 8.1:silly:
It's_Shawn said:
I've Flashed Phh's GSI Treble Roms.All Of Em Seems To Work Fine But Volte Is Not Working On Any Of Em So I Had To Switch Back To Stock. I Tested AOSP 9.0,RR 9.0 And Lineage 8.1:silly:
Click to expand...
Click to collapse
Which TWRP did you use?
And where can I find the stock firmware?
johndoe5 said:
Which TWRP did you use?
And where can I find the stock firmware?
Click to expand...
Click to collapse
That Time I Didn't Use Any Recovery,I Used Fastboot Commands
Hey I successfully installed TWRP recovery but I didn't flash magisk yet. But even now there is a message in status bar saying "Rooting of your phone has been detected. Tap to fix" and that screen is showing me to install 2.1GB OTA update. Idk what is happening I never faced such thing in any of my earlier phone while twrp flashing . What is this ? Can I install the update ? And why is it showing. Will there be possible bootloops if I install the update or willI I still be having TWRP or stock recovery get flashed. Please answer so i can proceed with my choice.
5s4rnv33r said:
Hey I successfully installed TWRP recovery but I didn't flash magisk yet. But even now there is a message in status bar saying "Rooting of your phone has been detected. Tap to fix" and that screen is showing me to install 2.1GB OTA update. Idk what is happening I never faced such thing in any of my earlier phone while twrp flashing . What is this ? Can I install the update ? And why is it showing. Will there be possible bootloops if I install the update or willI I still be having TWRP or stock recovery get flashed. Please answer so i can proceed with my choice.
Click to expand...
Click to collapse
https://forum.xda-developers.com/re...l-method-root-realme-1-install-t3908030/page3
try the solution written in soham028 's post.
it worked for me and updating os will remove root.
vikas2316 said:
https://forum.xda-developers.com/re...l-method-root-realme-1-install-t3908030/page3
try the solution written in soham028 's post.
it worked for me and updating os will remove root.
Click to expand...
Click to collapse
Updating OS will remove root but will it also remove TWRP ???
One more question I followed all the steps correctly (including wiping data) but from TWRP I can't mount DATA.
---------- Post added at 10:01 PM ---------- Previous post was at 09:13 PM ----------
After wiping data if I just reboot to TWRP recovery then I can mount the DATA but once I have started the phone and set it up then again I boot into TWRP recovery and when I try to mount DATA I am not able to do so. Can't mount /data invalid argument. Please suggest something.
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- Decryption works
- Otg works
- Backups works
- Flash Rom works
- Sdcard works
Download:
TWRP
To Flash the TWRP:
Code:
fastboot flash recovery twrp-RMX1971-20191017.img
Then reboot in TWRP manually.
Source code:
https://github.com/omnirom/android_bootable_recovery
https://github.com/thesprintster/device_realme_RMX1971/commits/android-9.0
Precompiled Stock Kernel in use
Credits:
Thanks to other testers for the tests and the support
Created 2019-10-17
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDA:DevDB Information
[RECOVERY][3.3.1-14][RMX1971]Unofficial TWRP for Realme 5 Pro (Stable), Tool/Utility for the Realme 5 Pro
Contributors
thesprintster, mauronofrio
Source Code: https://github.com/thesprintster/device_realme_RMX1971/commits/android-9.0
Version Information
Status: Stable
Created 2019-10-17
Last Updated 2019-10-17
Reserved
Why is there 3.3.1-9 in the download and 3.3.1-14 in the title? Did you share accidentally an older version or mistake in title?
greenys' said:
Why is there 3.3.1-9 in the download and 3.3.1-14 in the title? Did you share accidentally an older version or mistake in title?
Click to expand...
Click to collapse
mistake in title
thesprintster said:
mistake in title
Click to expand...
Click to collapse
Ah, I see. Thank you.
Edit.: You accidentally edited the title wrong. Noe it's 3.3.1-19 instead of 3.3.1-9.
Thanks dev for recovery. My phone has been trapped in bootloop after flashing magisk 20.0 . I have twrp back-up in my sd card and I'm restoring backup again. I was flashing to install titanium plus and vanced YouTube
Amot00 said:
Thanks dev for recovery. My phone has been trapped in bootloop after flashing magisk 20.0 . I have twrp back-up in my sd card and I'm restoring backup again. I was flashing to install titanium plus and vanced YouTube
Click to expand...
Click to collapse
How did you flash magisk? I mean first you gotta unlock bootloader. Did you successfully use in-depth test.
will try it soon..
On screen shot its lineage os.. ?
How to unlock the bootloader on Realme 5 Pro?
I mean there's no any tutorial to unlock it yet.. I found some tutorials on google but it doesn't look trusted..
Mustn't we unlock it first then eventually can install twrp ?
jijoejoe123 said:
will try it soon..
On screen shot its lineage os.. ?
Click to expand...
Click to collapse
Yes! I definitely need it!
New build guyz, fixed external sd card mounting. Link in 1st post.
Aizenmas said:
How to unlock the bootloader on Realme 5 Pro?
I mean there's no any tutorial to unlock it yet.. I found some tutorials on google but it doesn't look trusted..
Mustn't we unlock it first then eventually can install twrp ?
Click to expand...
Click to collapse
Go through : https://www.youtube.com/watch?v=FyEEmaaQZh8
Finally , a good news
Failed backup system image (size 5GB).. how to do?
thesprintster said:
New build guyz, fixed external sd card mounting. Link in 1st post.
View attachment 4847759
Click to expand...
Click to collapse
After bootloader unlock and following instructions it says failed to mount system_root and can't flash anything. Especially not lineage os, opengapps and magisk.
greenys' said:
After bootloader unlock and following instructions it says failed to mount system_root and can't flash anything. Especially not lineage os, opengapps and magisk.
Click to expand...
Click to collapse
Yes, this twrp is junk
i can not flash rom lg16 or stock rom ( stock rom convert opzip to zip) ,devices bug mount system_root
I got bootloop after install Rom Lineage, how to fix it?
29y6145 said:
Yes, this twrp is junk
i can not flash rom lg16 or stock rom ( stock rom convert opzip to zip) ,devices bug mount system_root
Click to expand...
Click to collapse
-----------------------------
TWRP flashing and LenageOS installation REALME 5 pro/Q
1)make sure that your bootloader is unlocked.
you can vist this link https://c.realme.com/in/post-details/1184734239149522944 OR
this youtube video
for referance
2)after you have a unlocked bootloader, download the neccessory files required in your PC
===>platform tools (fastboot files) link: https://dl.google.com/android/repository/platform-tools-latest-windows.zip
===>TWRP recovery img . link: https://drive.google.com/drive/folders/1_pRUK4bj74N6xErkpFLr--2GoKyGxUtl
===> vbmeta img . link: https://drive.google.com/file/d/1kq9rV3eF8rYAUwmUvXo-8vttYIhVcQCb/view
===>Leneage OS for realme 5 pro . link:https://drive.google.com/drive/folders/1wa4bllIa6WgH1STAszdxC_xkBTEHDSiT
3) once you have all the files
flash the vbmeta.img with fastboot..
COMMAND : fastboot flash vbmeta vbmeta.img
4) after that flash the recovery
COMMAND: fastboot flash recovery twrp-RMX1971-20191018.img
5) after that reboot into recovery by pressing the volume button on your phone and see " reboot recovery" in a red font
and press power button when u see that.
--.OPTIANAL AND RISKY step {IF YOU WANT TO BOOT INTO COLOROS AFTER INSTALLING TWRP, FLASH THE TWRP RECOVERY IMG AS BOOT ,i dont know this work in new twrp.but worked for me(fastboot flash boot twrp-RMX1971-20191018.img )}
6)after u successfully get the twrp menu make a backup of your whole system(all partitions) in case something goes wrong and move the backup into a lap or memory card
7)install the LenageOS and gapps . and reboot into fastboot mode and do step 3 again but this time flash vbmeta.img from this link:https://drive.google.com/drive/folders/1wa4bllIa6WgH1STAszdxC_xkBTEHDSiT
8) wipe the whole data partition
9) reboot normally.
IN CASE YOU ARE STUCK IN THE RECOVERY MODE OR FASTBOOT MODE FEEL FREE TO CONTACT ME @azharsalim135
---------- Post added at 05:22 PM ---------- Previous post was at 05:21 PM ----------
DnZX said:
I got bootloop after install Rom Lineage, how to fix it?
Click to expand...
Click to collapse
For non indian version Need seperate twrp to flash lineage.. It will be available soon. Dev working on it
working instal magisk in stock rom?
puturaya20 said:
working instal magisk in stock rom?
Click to expand...
Click to collapse
Dont try to install in stock rom.. I heard ita giving problems.. Backup stock before trying..
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Feature list https://github.com/crdroidandroid/crdroid_features/blob/9.0/README.mkdn
Rom folder + screenshot -> https://drive.google.com/open?id=1GYVVJ2GVC-MCN-dL84x8Z2uPkhcUd3cY
Instructions :
Backup all before flash!!
Check if you have unlocked bootloader and updated firmware if not download and flash it with twrp and reboot recovery before start flash
https://drive.google.com/open?id=1FfYb6hWviggupkQRBNfE-ah85MSl-1aB
First of all you need to flash or boot @Giovix92 TWRP (I recommend)
https://forum.xda-developers.com/mi-a1/development/recovery-twrp-3-3-1-0-tissot-manager-t3976117
or official twrp
Boot into twrp and factory reset
Flash the rom zip
Flash twrp installer (skip if you use twrp survive option)
Reboot recovery
Flash opengapps nano or pico
If you want to root, flash Magisk
Reboot to System.
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES :
You tell me
Some QS theme maybe have color problem but default QS works. Source bug,I can't fix for now
A very special thanks to @Giovix92 and my telegram friends https://t.me/XiaomiMiA1Italia and who tested this rom.
Source
https://github.com/crdroidandroid
https://github.com/LineageOS/android_device_xiaomi_msm8953-common/tree/lineage-16.0
https://github.com/LineageOS/android_device_xiaomi_tissot
https://github.com/LineageOS/android_kernel_xiaomi_msm8953
https://github.com/RevengeOS-Devices/android_vendor_xiaomi_tissot
https://github.com/LineageOS/android_device_xiaomi_msm8953-common/tree/lineage-16.0
https://github.com/LineageOS/android_device_xiaomi_tissot
https://github.com/LineageOS/android_kernel_xiaomi_msm8953
https://github.com/RevengeOS-Devices/android_vendor_xiaomi_tissot
XDA:DevDB Information
[Official] crDroid 9.0 TISSOT, ROM for the Xiaomi Mi A1
Contributors
samuele94, Giovix92, https://t.me/XiaomiMiA1Italia users for support!
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Android 9 firwmare (check my profile)
Based On: LOS
Version Information
Status: Stable
Created 2019-10-23
Last Updated 2019-11-28
Goodjob!
Hope 6.0 for 10
Nickinfinity said:
Goodjob!
Click to expand...
Click to collapse
Thanks,I'll keep it updated!
manchirua said:
Hope 6.0 for 10
Click to expand...
Click to collapse
Yes but for now I wait stable public trees for us,for now I keep android 9 updated and I try to build 6.0 soon!
until the situation of android 10 remains "beta" I will stay on android 9 for stability.
android 10 is a great working in progress, right now I don't feel the need to go to 10 but I'll work on it willingly! The development of tissot needs people who keep it alive!
Awesome, unless q stabalises pie will do dont rush for q, btw why not take official maintainership, its abandoned afaik.
Good, thanks bro
Sohil876 said:
Awesome, unless q stabalises pie will do dont rush for q, btw why not take official maintainership, its abandoned afaik.
Click to expand...
Click to collapse
You're right but I'm learning. I only claim to continue building this rom for my only smartphone because I want to keep an updated rom 9.0. For now the tag isn't essential for me but I'll see what I can do!
Any particular opengapps recomended? I've found some trouble installing latest opengapps builds in LOS 16. Latest opengapps is working fine in crDRoid?
Thanks for your effort.
samuele94 said:
Thanks,I'll keep it updated!
Yes but for now I wait stable public trees for us,for now I keep android 9 updated and I try to build 6.0 soon!
until the situation of android 10 remains "beta" I will stay on android 9 for stability.
android 10 is a great working in progress, right now I don't feel the need to go to 10 but I'll work on it willingly! The development of tissot needs people who keep it alive!
Click to expand...
Click to collapse
Yeah, thank you
BTW, i can use MindTheGapps?
manchirua said:
Yeah, thank you
BTW, i can use MindTheGapps?
Click to expand...
Click to collapse
Not tested but why not? you can try,rom works fine with opengapps but i think you can change type of gapps. I like opengapps nano (or pico) but MindTheGapps for arm64 and android 9 should work properly
Mendibil said:
Any particular opengapps recomended? I've found some trouble installing latest opengapps builds in LOS 16. Latest opengapps is working fine in crDRoid?
Thanks for your effort.
Click to expand...
Click to collapse
Last i tried all gapps build before 6 oct worked fine so download older than 6 oct release, its not los problem.
Great rom, Working flawlessly.
Btw any solution for green slow-motion recording?
Mendibil said:
Any particular opengapps recomended? I've found some trouble installing latest opengapps builds in LOS 16. Latest opengapps is working fine in crDRoid?
Thanks for your effort.
Click to expand...
Click to collapse
Yes you can use latest opengapps nano or pico 9.0 arm64 but if you have problem you can download older version here https://sourceforge.net/projects/opengapps/files/arm64/ gapps are nightly, I don't know if it have bugs/problems
Stealtherthreat said:
Great rom, Working flawlessly.
Btw any solution for green slow-motion recording?
Click to expand...
Click to collapse
Try a good GCam and see if it fix, I don't use this feature sorry
Added on my Gdrive folder changelog about this build. I'll update file after new build,when new build? when I can see difference to previous build!
Hi to all! Rom is now official,check here!
https://crdroid.net/tissot Add Telegram group https://t.me/crDroidA1
Tested today opengapps nano 25/10/19 works perfect and encryption works too
Messed up
Not sure what happened but everything is messed up after trying to flash the new ROM.
not able to run twrp properly,
Not able to install gaps
I keep getting a message that some partition is not there and...
Looking for a new handset...
teoasv said:
Not sure what happened but everything is messed up after trying to flash the new ROM.
not able to run twrp properly,
Not able to install gaps
I keep getting a message that some partition is not there and...
Looking for a new handset...
Click to expand...
Click to collapse
Steps? Twrp used? Here works fine,tested by me and other people. Without info I can't help you
samuele94 said:
Steps? Twrp used? Here works fine,tested by me and other people. Without info I can't help you
Click to expand...
Click to collapse
Tried to do everything by the book:
Was running the previous cdroid version.
BAckuped everything.
Wipe clean (not the Data)
Flashed the new one with twrp
After that I could not load the twrp recovery anymore and it kept loading the lineage recovery tool which I have not seen before.
I ADB flashed the twrp but not on recovery partition. Recovery was not found and therefore I flashed it on boot(the command that worked: fastboot flash boot twrp.img) But then I could not flash any Gapps . It gave me a message that a partition was missing or something.
What seemed to work but not quite:
Wiped everything with the lineage recovery tool
AdB sideload the new rom
After no success on any Gapps package with this method, I tried the MindtheGapps and it sort -of - works: I got google but cannot restore my google data
teoasv said:
Tried to do everything by the book:
Was running the previous cdroid version.
BAckuped everything.
Wipe clean (not the Data)
Flashed the new one with twrp
After that I could not load the twrp recovery anymore and it kept loading the lineage recovery tool which I have not seen before.
I ADB flashed the twrp but not on recovery partition. Recovery was not found and therefore I flashed it on boot(the command that worked: fastboot flash boot twrp.img) But then I could not flash any Gapps . It gave me a message that a partition was missing or something.
What seemed to work but not quite:
Wiped everything with the lineage recovery tool
AdB sideload the new rom
After no success on any Gapps package with this method, I tried the MindtheGapps and it sort -of - works: I got google but cannot restore my google data
Click to expand...
Click to collapse
You shouldnt flash img from fastboot only boot that, fastboot boot twrp then flash installer.zip file of twrp from the hotbooted twrp, then do reboot to recovery.
Sohil876 said:
You shouldnt flash img from fastboot only boot that, fastboot boot twrp then flash installer.zip file of twrp from the hotbooted twrp, then do reboot to recovery.
Click to expand...
Click to collapse
Sorry I don't get what you are saying. I did this:
Open the folder where your TWRP Recovery .img file is saved.
Then open a CMD window inside that folder. To do that, Shift + Right click on any empty white space inside the folder and then select Open command window here.
Connect your Android device to the PC. Type the following into the command window to boot your device into bootloader/fastboot mode:
adb reboot bootloader
└ If your asks for permission to “Allow USB debugging”, tap OK.
Once your device boots into bootloader mode, type this into the command line.
fastboot flash recovery twrp-2.8.x.x-xxx.img
└ Here modify twrp.img with the name of your TWRP recovery .img file.
Once TWRP is successfully flashed on your device, type this final command to reboot your device.
fastboot reboot
teoasv said:
Tried to do everything by the book:
Was running the previous cdroid version.
BAckuped everything.
Wipe clean (not the Data)
Flashed the new one with twrp
After that I could not load the twrp recovery anymore and it kept loading the lineage recovery tool which I have not seen before.
I ADB flashed the twrp but not on recovery partition. Recovery was not found and therefore I flashed it on boot(the command that worked: fastboot flash boot twrp.img) But then I could not flash any Gapps . It gave me a message that a partition was missing or something.
What seemed to work but not quite:
Wiped everything with the lineage recovery tool
AdB sideload the new rom
After no success on any Gapps package with this method, I tried the MindtheGapps and it sort -of - works: I got google but cannot restore my google data
Click to expand...
Click to collapse
Previous version? It's the first version!
Your firmware is up to date? you need to update it and hotboot again twrp,flash installer reboot recovery and follow op step.
No you need to fastboot boot latesttwrp.img boot not flash,for flash you need twrp installer