Database Develop

[recovery] twrp 3.0

Heya all~
Last thing we have got TWRP 2.8.7.0, and now we get TWRP 3.0 :victory:
The bad thing is... No material design and cant mount adoptable storage. Well, we dont need fancy design, we just need the function, isn't it?
Well, here are the download link (Flashable Zip)
https://www.androidfilehost.com/?fid=24438995911970726
How To Install via Flashtool
- Extract the zip
- Put the correct android scatter into 1 folder.
- For Android One rom use MT6580_Androidone_blablabla
- For Infinix Rom use MT6580_infinix_ROM_blablabla
- Flash it.
How to Install via Flashable Zip
- Go to TWRP (NOT STOCK RECOVERY)
- Just install the zip
- Reboot recovery
- Done.
Credits:
- Joseph Godslave (For the flashable zip )
- Jemmini (For compile this TWRP)
- All Infinix Hot 2 Android One Users
- bbs.infinixmobility.com
- And you

Reserved

Thanks ???

Can I flash it via fastboot?

Mysteryagr said:
Can I flash it via fastboot?
Click to expand...
Click to collapse
Yep.

RendyAK said:
Yep.
Click to expand...
Click to collapse
It failed
Sent from my Infinix X510 using XDA-Developers mobile app

Mysteryagr said:
It failed
Sent from my Infinix X510 using XDA-Developers mobile app
Click to expand...
Click to collapse
Oh, okay, just flash it via flashtool, the scatter file already there.

does not work with marshmallow 6.0 M android One 20160315

remedb said:
does not work with marshmallow 6.0 M android One 20160315
Click to expand...
Click to collapse
Please after install the recovery, then go to twrp, dont go to homescreen, becouse if you go to homescreen after install the recovery, system will replace the twrp with the stock one.
After you go to twrp, swipe to allow modification and reboot.

It worked for me on mashmallow....THANKS

Twrp recovery doesn't work with key combination. this is useless, still i can't restore my backup i bricked my phone hence i can't boot into recovery using rasher or mobile uncle tool as it's bricked already, now i need to boot into recovery with key combo but how is there any trwp recovery which works with key combo? Help will be highly appreciated

umar king said:
Twrp recovery doesn't work with key combination. this is useless, still i can't restore my backup i bricked my phone hence i can't boot into recovery using rasher or mobile uncle tool as it's bricked already, now i need to boot into recovery with key combo but how is there any trwp recovery which works with key combo? Help will be highly appreciated
Click to expand...
Click to collapse
Whoa, whoa, whoa.
You need to enable key combination first if yiu are in stock Android One (L/M) ROM!

RendyAK said:
Whoa, whoa, whoa.
You need to enable key combination first if yiu are in stock Android One (L/M) ROM!
Click to expand...
Click to collapse
I'm on stock infinix rom not Android one

umar king said:
I'm on stock infinix rom not Android one
Click to expand...
Click to collapse
Oh, ok.
The key combination: Power + Volume Up.
Dont flash it with mobile uncle tools, i think. That tools seems too old for this device :/

RendyAK said:
Oh, ok.
The key combination: Power + Volume Up.
Dont flash it with mobile uncle tools, i think. That tools seems too old for this device :/
Click to expand...
Click to collapse
Thanks
I did download twrp manager from play store and install twrp 3.0 now its working with key combination but i taped on keep read only option by mistake, will it be removed after i flash any custom rom?

You can easily install this using Flashify app.
Thanks, I'm sure everyone will need it.

[RECOVERY][ROOT][TWRP 3.0.2-1]Samsung Galaxy A5(2015) SM-A500F/FU/G/H/M

Unofficial release -TWRP recovery for the Galaxy A5 - SM-A500F/FU/G/H/M, Qualcomm MSM8916
https://twrp.me/site/update/2016/04/05/twrp-3.0.2-0-released.html
SEANDROID warning fix
Recovery reboot fix
Modem, APNHLOS, EFS and Recovery partition backup
29/4/2016 - Time offset fix
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
Instructions:
Flash with ODIN 3.10.7 in the AP slot:
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
You should now see TWRP recovery.
Flash with TWRP:
Extract the recovery.img from the tar archive then in TWRP select Install>>Install image.
twrp_3.0.2-1_sm-a500
PLEASE DO *NOT* DIRECT LINK TO THESE FILES. PLEASE LINK TO THIS POST
To Root:
Flash the file below with TWRP:
DO NOT LET TWRP ROOT YOUR DEVICE IF IT ASKS. USE ONLY THE FILE BELOW:
http://download.chainfire.eu/1019/SuperSU/SR2-SuperSU-v2.79-SR2-20170103215521.zip
DEVICE TREE: soon
NOTE: ON SOME ANDROID 5.1.1 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
Credits: Me, Teamwin and my testers- icesehman, -CALIBAN666-, jimbomodder
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
FEEDBACK IS APPRECIATED PLEASE.
THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
.

I'll be keeping an eye on this thread

Thankyou.... Working Fine..
No reboot issue.. A500G

Any tried to see if aroma files now flash OK?
From the giver of stock roms
Edit..
Works fine finally [emoji122] [emoji122]

Hello! You're the best! Can you make TWRP 3 for Galaxy A7 SM-A700FD? How to fix recovery reboot?
Thank you!

jazzzzy said:
Hello! You're the best! Can you make TWRP 3 for Galaxy A7 SM-A700FD? How to fix recovery reboot?
Thank you!
Click to expand...
Click to collapse
Isn't there already twrp for A700FD?

ashyx said:
Isn't there already twrp for A700FD?
Click to expand...
Click to collapse
All unofficial versions have reboot bug. And as far as I new - you managed to fix it!

only problem when reboot from xposed power menu mod (wanam, apm+, etc). Need to flash again via odin and uninstall the module.

icesehman said:
only problem when reboot from xposed power menu mod (wanam, apm+, etc). Need to flash again via odin and uninstall the module.
Click to expand...
Click to collapse
Thank you.
OK, I'll try to disable wanam's power menu and flash TWRP. I'll write the result. ...
I disabled wanam's power menu, flashed TWRP 3.0.0 without autoreboot ticked and rebooted into recovery.
Then I set time settings in TWRP and started backup. Backup completed...
Reboot from TWRP (Reboot System) - Reboot normal !!!
I will watch its behavour ... and perhaps the problem is solved.

jazzzzy said:
All unofficial versions have reboot bug. And as far as I new - you managed to fix it!
Click to expand...
Click to collapse
I'll see what I can do, time permitting.

So Far So Good.
Good job Mr. @ashyx , I've tested this recovery and two problems fixed out of three.
SEANDROID Error: Fixed.
Recovery reboot : Didn't fixed
EFS, APNHLOS etc... partitions Backup : Fixed
I reverted back to 2.8.7.0 recovery until recovery reboot get fixed.
I'll post a recovery log soon.
I'm using A500H Duos.
Thanks.

Ahmed_Khalifa said:
Good job Mr. @ashyx
Recovery reboot : Didn't fixed
Click to expand...
Click to collapse
Others say this issue is fixed?

ashyx said:
Does this fix the touchscreen and reboot issue?
https://www.androidfilehost.com/?fid=24499762636004631
Click to expand...
Click to collapse
That links for a300
Sent from my SM-A500FU

Whoops wrong thread!
Sent from my HTC One_M8 using XDA Free mobile app

Little Confused.
ashyx said:
Others say this issue is fixed?
Click to expand...
Click to collapse
Are they using A500H or other variant?

Ahmed_Khalifa said:
Are they using A500H or other variant?
Click to expand...
Click to collapse
You need to be sure it's a problem with the recovery. Power off your device and boot to system normally.
Using a terminal emulator type:
su
reboot recovery
Do you still get a recovery loop?

recovery reboot problem.
ashyx said:
You need to be sure it's a problem with the recovery. Power off your device and boot to system normally.
Using a terminal emulator type:
su
reboot recovery
Do you still get a recovery loop?
Click to expand...
Click to collapse
Here is what I did:
I flashed the recovery via flashify.
I rebooted the device normally.
After the phone restarts, it shows the Yellow colored warning Set warrenty bit: recovery.
The device boots into TWRP recovery mode.
After that I press reboot -> system.
After restart, it goes back to step 3.
Thank you.

That seems like you have flashed the boot partition with the recovery.img.
Please don't flash with Flashify. You cannot trust that it is flashing correctly.
Use the recovery image flash option in TWRP itself or use ODIN.
Sent from my HTC One_M8 using XDA Free mobile app

If we reboot directly to recovery, i mean through wannam xpossed power menu, recovery reboot issue occurs.. Pls fix this too..
Otherwise all are perfect

the error still exists.
ashyx said:
That seems like you have flashed the boot partition with the recovery.img.
Please don't flash with Flashify. You cannot trust that it is flashing correctly.
Use the recovery image flash option in TWRP itself or use ODIN.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
I used the flash option in TWRP but it still reboots into recovery.
I posted a recovery log maybe it'll help you fix the problem.
by the way, can you tell me which baseband,pda,csc you're using?
my software might be a little old?
Thanks.

[RECOVERY][ROOT][TWRP 3.3.1-1]Samsung Galaxy A3(2015) SM-A300F/FU/G/H/M

Unofficial release -TWRP recovery for the Galaxy A3 - SM-A300F/FU/G/H/M, Qualcomm MSM8916
https://twrp.me/site/update/2019/05/22/twrp-3.3.1-0-released.html
*SEANDROID warning fix
*Recovery reboot fix
*MTP fix
*Modem, APNHLOS, EFS and Recovery partition backup
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
Instructions:
Flash with ODIN 3.10.7 in the AP slot:
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
You should now see TWRP recovery.
Flash with TWRP:
Extract the recovery.img from the tar archive then in TWRP select Install>>Install image.
twrp_3.0.2-1_sm-a300
twrp_3.3.1-2_sm-a300x_101119
PLEASE DO *NOT* DIRECT LINK TO THESE FILES. PLEASE LINK TO THIS POST
To Root:
I suggest using Magisk as its a currently up to date project. Supersu is no longer maintained:
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
DEVICE TREE: soon
NOTE: ON SOME ANDROID 5.1.1 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
Credits: Me, Teamwin and my testers- icesehman, -CALIBAN666-, jimbomodder
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
FEEDBACK IS APPRECIATED PLEASE.
THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
.

Hmm... could this maybe be flashed with Flashify?

King-V said:
Hmm... could this maybe be flashed with Flashify?
Click to expand...
Click to collapse
It could, but better to flash it with TWRP or ODIN.

ashyx said:
It could, but better to flash it with TWRP or ODIN.
Click to expand...
Click to collapse
Wait... what? Flash this version of TWRP, using an older version of TWRP? Does that really work?

King-V said:
Wait... what? Flash this version of TWRP, using an older version of TWRP? Does that really work?
Click to expand...
Click to collapse
Of course it does, it's been that way since about version 2.8.6.0

ashyx said:
Of course it does, it's been that way since about version 2.8.6.0
Click to expand...
Click to collapse
Never knew that; it sounds quite handy... Thanks a lot!

Well, i wish we had 5.1.1...
Thanks a lot btw.

PlutoDelic said:
Well, i wish we had 5.1.1...
Thanks a lot btw.
Click to expand...
Click to collapse
You don't need 5.1.1.
Sent from my HTC One_M8 using XDA Free mobile app

ashyx said:
You don't need 5.1.1.
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
Obviously.
I stumbled on an issue. TWRP boots fine, but no touch input. Reboot issue seems to remain IF one "reboot to recovery" from the system. Everything works find under the hood, connected through adb without any issue.

PlutoDelic said:
Obviously.
I stumbled on an issue. TWRP boots fine, but no touch input. Reboot issue seems to remain IF one "reboot to recovery" from the system. Everything works find under the hood, connected through adb without any issue.
Click to expand...
Click to collapse
Which device model?
Can you post the recovery.log file?

PlutoDelic said:
Obviously.
I stumbled on an issue. TWRP boots fine, but no touch input. Reboot issue seems to remain IF one "reboot to recovery" from the system. Everything works find under the hood, connected through adb without any issue.
Click to expand...
Click to collapse
hi community,
first of all very big thanks to @ashyx to support our device and port the new twrp :highfive:
i can confirm that the recovery start without problems after flashing with android 5.0.2 but sadly maybe the touchdriver not loading. touch have for now no function
my device is the a300fu with touchwiz stockrom and baseband boj4.
@ashyx, please fix the problem with touch and maybe all will be good :highfive:
best regards and thank's for support our community :highfive: :good:

Duke2010 said:
hi community,
first of all very big thanks to @ashyx to support our device and port the new twrp :highfive:
i can confirm that the recovery start without problems after flashing with android 5.0.2 but sadly maybe the touchdriver not loading. touch have for now no function
my device is the a300fu with touchwiz stockrom and baseband boj4.
@ashyx, please fix the problem with touch and maybe all will be good :highfive:
best regards and thank's for support our community :highfive: :good:
Click to expand...
Click to collapse
Yes I'll fix the issue, but I need someone to upload the recovery log from cache/recovery/last_log

ashyx said:
Which device model?
Can you post the recovery.log file?
Click to expand...
Click to collapse
A300FU
Attached.
Reflashing the .tar weirdly gets rid of the reboot to recovery issue, wonder if any flag is being reset...

PlutoDelic said:
A300FU
Attached.
Reflashing the .tar weirdly gets rid of the reboot to recovery issue, wonder if any flag is being reset...
Click to expand...
Click to collapse
hi folks,
i send my logfile too. well done :highfive:
best regards :good:

Duke2010 said:
hi folks,
i send my logfile too. well done :highfive:
best regards :good:
Click to expand...
Click to collapse
Does this fix the touchscreen and reboot issue?
https://www.androidfilehost.com/?fid=24499762636004631

ashyx said:
Does this fix the touchscreen and reboot issue?
https://www.androidfilehost.com/?fid=24499762636004631
Click to expand...
Click to collapse
sorry, no my device stuck into boot recovery process. it is not possible to booting up into recocery. :crying:
try again please :highfive:
thank you and best regards :good:

Duke2010 said:
sorry, no my device stuck into boot recovery process. it is not possible to booting up into recocery. :crying:
try again please :highfive:
thank you and best regards :good:
Click to expand...
Click to collapse
Please post your device model.

Hi mate,
My device is the a300fu with boj4 bootloader and boj5 touchwiz stockrom
Best regards :good:

First of all Thanks for your work!
I´m also on the A300FU Device
ashyx said:
Yes I'll fix the issue, but I need someone to upload the recovery log from cache/recovery/last_log
Click to expand...
Click to collapse
With the TWRP from OP, I confirm TWRP starts but Touch is not working (Log old)
ashyx said:
Does this fix the touchscreen and reboot issue?
https://www.androidfilehost.com/?fid=24499762636004631
Click to expand...
Click to collapse
With the "Fix" it stuck bevor TWRP Screen should appear (Log new) btw. flashed both with Odin

Jonny_Hood said:
First of all Thanks for your work!
I´m also on the A300FU Device
With the TWRP from OP, I confirm TWRP starts but Touch is not working (Log old)
With the "Fix" it stuck bevor TWRP Screen should appear (Log new) btw. flashed both with Odin
Click to expand...
Click to collapse
Looking at the recovery log it seems there is an issue loading the graphics, so I have reverted one of the flags that I think is causing the issue.
https://www.androidfilehost.com/?fid=24499762636004909
NOTE: I will not support any posts related to flashing with Flashify, this app has issues with some devices. ODIN(prefered), TWRP and the DD method is fine.
.

[ROOT] Full Root for the Mate 9

I DIRECT YOUR ATTENTION TO THIS THREAD INSTEAD: https://forum.xda-developers.com/mate-9/how-to/guide-how-to-root-mate-9-decrypt-data-t3569986
It's easier as you don't need to get a decrypted boot image.
Thank you ajsmsg78 for your work on this.
If you rooted using this method you don't need to re-root. Only difference is that SuperRoot patches boot image to "decrypt" automatically.

Perfect. Will try this later and report back. Thank you!

Just a tip, wipe dalvik & cache after flashing, fixed some small bugs for me (Not being able to get into developer options)
Also, RSA breaks if you flash the wrong boot image (165 on 138) so no adb

Yes!!!!

ante0 said:
Just a tip, wipe dalvik & cache after flashing, fixed some small bugs for me (Not being able to get into developer options)
Also, RSA breaks if you flash the wrong boot image (165 on 138) so no adb
Click to expand...
Click to collapse
So does this work if RSA break...Sorry I'm a noob. Is this process safe to root? Which one should image should I flash
..The latest one I'm assuming.
Sent from my MHA-L29 using XDA-Developers Legacy app

Ckao said:
So does this work if RSA break...Sorry I'm a noob. Is this process safe to root? Which one should image should I flash
..The latest one I'm assuming.
Sent from my MHA-L29 using XDA-Developers Legacy app
Click to expand...
Click to collapse
What model are you using?
Check Settings - About - Build number
MHA-L29...
About safeness, worst case you can use FunkyHuawei to restore (Unless you're using the US C567, and it's not a free service). But restoring stock boot using fastboot should be enough, and you would do a data wipe in vain.

ante0 said:
What model are you using?
Check Settings - About - Build number
MHA-L29...
About safeness, worst case you can use FunkyHuawei to restore (Unless you're using the US C567, and it's not a free service). But restoring stock boot using fastboot should be enough, and you would do a data wipe in vain.
Click to expand...
Click to collapse
Sent from my MHA-L29 using XDA-Developers Legacy app

*in that way we don't need to have the boodloader unlocked ??

Ckao said:
View attachment 4041592
Sent from my MHA-L29 using XDA-Developers Legacy app
Click to expand...
Click to collapse
So... To be clear for the folks that need clarity (me) to prevent messing up a device without a downloadable full ROM (though I'll do a full TWRP Backup to the best of my ability post step one), the current US only build appropriate boot image is B138?
Thank you for the screenshot. Ready to pop open the new device box and unlock the bootloader and fastboot. This helps so I'm flashing the correct modified boot.img in recovery.

talstar said:
*in that way we don't need to have the boodloader unlocked ??
Click to expand...
Click to collapse
Yes you must unlock your bootloader in order to flash TWRP and install root.
Sent from my ONEPLUS A3000 using XDA-Developers Legacy app
---------- Post added at 07:33 PM ---------- Previous post was at 07:32 PM ----------
Time to break my mate 9 back out and root it again. Thank you!
Sent from my ONEPLUS A3000 using XDA-Developers Legacy app

@ajsmsg78 the boot images cause a bootloop for MHA-L29C185 could you please make a special boot file for it, here is the link for C185B138
https://mega.nz/#!PsxGhJ7R!iN7g1OaEbaw-4jXvj9cXhA_wfXwoaDN8Fgs8X7PrTCc

Will you be supporting M9P ?

This boot looped my MHA-L29C636B138.

Blue.Ember said:
@ajsmsg78 the boot images cause a bootloop for MHA-L29C185 could you please make a special boot file for it, here is the link for C185B138
https://mega.nz/#!PsxGhJ7R!iN7g1OaEbaw-4jXvj9cXhA_wfXwoaDN8Fgs8X7PrTCc
Click to expand...
Click to collapse
Yeah when I get home I'll take care of it. Make sure your data is decrypted before you flash the boot.img. I had no issues with any boot images on my C567 US version.

ante0 said:
Just a tip, wipe dalvik & cache after flashing, fixed some small bugs for me (Not being able to get into developer options)
Also, RSA breaks if you flash the wrong boot image (165 on 138) so no adb
Click to expand...
Click to collapse
I'm gonna fix that in the boot.img. I had issues with adb being unauthorized but realized what the issue was.

samnahata said:
Will you be supporting M9P ?
Click to expand...
Click to collapse
No I can only support the phone that I own. However, if you need a boot.img decrypted send me the file and I'll do it.

ajsmsg78 said:
No I can only support the phone that I own. However, if you need a boot.img decrypted send me the file and I'll do it.
Click to expand...
Click to collapse
Sure, i would love to help the community. Could you kindly explain to me how i can extract this boot.img?

samnahata said:
Sure, i would love to help the community. Could you kindly explain to me how i can extract this boot.img?
Click to expand...
Click to collapse
In TWRP do a backup of you rom then go into your sdcard then into TWRP, then backups, then the next folder with all the numbers then into the name of your backup then send me the boot.emmc.win file.

ajsmsg78 said:
In TWRP do a backup of you rom then go into your sdcard then into TWRP, then backups, then the next folder with all the numbers then into the name of your backup then send me the boot.emmc.win file.
Click to expand...
Click to collapse
Thank you. I will get on it and send it to you ASAP.

Fixed adb on B365.

J7 Prime SM-G610Y

Is there a guide to root & install TWRP for the model G610Y? As well as any compatible Roms & Xposed as well...
UPDATED:
I found a method to add custom recovery, root and add xposed with success on android 6.0 on POST #4. If anyone knows of custom roms please share...

all SM-G610 ROM works on SM-G610Y devices. I also have SM-G610Y and I'm using NOVA D:good:

lionelandres said:
all SM-G610 ROM works on SM-G610Y devices. I also have SM-G610Y and I'm using NOVA D:good:
Click to expand...
Click to collapse
Even thought it is 6.0 android only? The 610Y devices havent gotten the 7.0 update yet...did u use TWRP? Can you post the link to the working recovery, root and rom if possible? thanx

I used this method to install CWM Recovery & Root with success:
https://forum.xda-developers.com/android/general/root-samsung-galaxy-j7-prime-cwm-t3516777
This is the Xposed (custom-build-by-wanam) I used for this device as well:
Flashed this zip using ADB side load method on CWM: https://androidfilehost.com/?fid=24591000424962808
Use the Installer I attached.
I ALSO INCLUDED ALL THE XPOSED FILES AS WELL
Here is the uninstaller just in case:
https://androidfilehost.com/?fid=24499762635998273

insane209 said:
Even thought it is 6.0 android only? The 610Y devices havent gotten the 7.0 update yet...did u use TWRP? Can you post the link to the working recovery, root and rom if possible? thanx
Click to expand...
Click to collapse
I've used TWRP 3.
https://forum.xda-developers.com/ga.../recovery-twrp-3-2-0-galaxy-j7-prime-t3716355
install TWRP and flash any ROM in this section:good:
and yes bro I'm already on Nougat. That's the point of installing a custom ROM, you'll not gonna use or wait for the official samsung updates for your variant ( well atleast for me)

lionelandres said:
I've used TWRP 3.
https://forum.xda-developers.com/ga.../recovery-twrp-3-2-0-galaxy-j7-prime-t3716355
install TWRP and flash any ROM in this section:good:
and yes bro I'm already on Nougat. That's the point of installing a custom ROM, you'll not gonna use or wait for the official samsung updates for your variant ( well atleast for me)
Click to expand...
Click to collapse
I tried that method... Could not mount internal or sd card to flash...

insane209 said:
Even thought it is 6.0 android only? The 610Y devices havent gotten the 7.0 update yet...did u use TWRP? Can you post the link to the working recovery, root and rom if possible? thanx
Click to expand...
Click to collapse
insane209 said:
I tried that method... Could not mount internal or sd card to flash...
Click to expand...
Click to collapse
Use OTG to flash. There's still a bug on TWRP.

lionelandres said:
Use OTG to flash. There's still a bug on TWRP.
Click to expand...
Click to collapse
And you can install any of these 7.0 Roms in this section over your Android MM 6.0 G610Y device?

insane209 said:
And you can install any of these 7.0 Roms in this section over your Android MM 6.0 G610Y device?
Click to expand...
Click to collapse
Yes. I've tried most of the Nougat ROM here. RR, Nova etc

lionelandres said:
Yes. I've tried most of the Nougat ROM here. RR, Nova etc
Click to expand...
Click to collapse
Will give it a go! Thank u good sir! ??

Nvm I Got it
https://forum.xda-developers.com/ga.../request-to-solve-twrp-sd-card-mount-t3734050

insane209 said:
Can I flash a rom using CWM adb side load as well?
Click to expand...
Click to collapse
only use ADB side load or TWRP.:good:

lionelandres said:
only use ADB side load or TWRP.:good:
Click to expand...
Click to collapse
Well yea i can use ADB side load on CWM.. I cant figure it out on TWRP...but does CWM have Aroma?

insane209 said:
Well yea i can use ADB side load on CWM.. I cant figure it out on TWRP...but does CWM have Aroma?
Click to expand...
Click to collapse
not sure about CWM though, most ROM were built for TWRP install method. I always use TWRP and it has Aroma :good:

TUTORIAL
lionelandres said:
I've used TWRP 3.
https://forum.xda-developers.com/ga.../recovery-twrp-3-2-0-galaxy-j7-prime-t3716355
install TWRP and flash any ROM in this section:good:
and yes bro I'm already on Nougat. That's the point of installing a custom ROM, you'll not gonna use or wait for the official samsung updates for your variant ( well atleast for me)
Click to expand...
Click to collapse
-- By any means, could you please make a tutorial on how did you flash such ROMs in your sm g610y? It would be very helpful to me because I'm new to this model of phone. I really want to get rid of the bloatwares on my device badly. Thank you very much in advance!

JMags777 said:
-- By any means, could you please make a tutorial on how did you flash such ROMs in your sm g610y? It would be very helpful to me because I'm new to this model of phone. I really want to get rid of the bloatwares on my device badly. Thank you very much in advance!
Click to expand...
Click to collapse
1. Factory reset your phone
2. Enable developers option
3. In developers option enable oem unlock
4. Power off your device
5. Enter in download mode
6. Flash Twrp recovery through odin
7. Reboot into recovery (volume up + Home + power)
8. On Twrp go to advanced and Format data
9. Mount internal mem and attach pc and drag any rom to phone memory (im using Xenos)
10. Flash it follow the installation and your done

insane209 said:
1. Factory reset your phone
2. Enable developers option
3. In developers option enable oem unlock
4. Power off your device
5. Enter in download mode
6. Flash Twrp recovery through odin
7. Reboot into recovery (volume up + Home + power)
8. On Twrp go to advanced and Format data
9. Mount internal mem and attach pc and drag any rom to phone memory (im using Xenos)
10. Flash it follow the installation and your done
Click to expand...
Click to collapse
Thank you so much for the tip sir. I already flashed my phone with XenOs1.1 and it is running well so far. ??

lionelandres said:
Yes. I've tried most of the Nougat ROM here. RR, Nova etc
Click to expand...
Click to collapse
What ROM do you think is the most stable?

any of you guys tried the LineageOS 15.1?

Xenos rom pro