Cannot get into recovery. Device seems to be bricked.
After Sony logo there is nothing else other than black screen. Please help me recover my device.
Don't Panic, this can easily be recovered. However the data that was inside I'm afraid is gone forever. Maybe it can be recovered maybe not, anyway I'm giving you some easy steps you can follow to recover your device.
1. Download Flashtool
2. Download the Firmware you want to load into the phone. (Search in the forum for .ftf ---make sure it is for Xperia Z --- files or you can download Xperifirm and make them on your own)
3. Once you have the .ftf file ready click on the Flash (Lightning) icon and select the firmware (.ftf) [Mode to flash is FLASHMODE]
4. When the phone is just one second from booting up (I know you are now in a cycle - loop but try as many times until you get it right), with the VOLUME DOWN button pressed connect it into the PC.
5. Wait for flash - About 10-15 min and you are done.
For any questions ask here. Good luck
I recovered my phone via Sony PC companion. Succesfuly managed to flash dual recovery again. Flashed ROM and Gappps.
This time Phone didnt start after reboot. There is not even a sony logo. No reboots at all and now it seems bricked ?
If anyone is reading please help me out.
I tried using Flashtools getting into Fastboot mode (Blue light flashing), but Flashtoool responded saying needs to installl drivers. I did that as well, but now the flashtools wont start at all.
I am trying via pc companion, Its stuck on a step where its asking me to remove my battery.. How do I recover ? Please help. Thanks in advance.
ProudRed said:
I recovered my phone via Sony PC companion. Succesfuly managed to flash dual recovery again. Flashed ROM and Gappps.
This time Phone didnt start after reboot. There is not even a sony logo. No reboots at all and now it seems bricked ?
If anyone is reading please help me out.
I tried using Flashtools getting into Fastboot mode (Blue light flashing), but Flashtoool responded saying needs to installl drivers. I did that as well, but now the flashtools wont start at all.
I am trying via pc companion, Its stuck on a step where its asking me to remove my battery.. How do I recover ? Please help. Thanks in advance.
Click to expand...
Click to collapse
Can you get to the point where the phone lights up the GREEN LED (flash mode) ?
Also what version of windows are you using?
aaronkatrini said:
Can you get to the point where the phone lights up the GREEN LED (flash mode) ?
Also what version of windows are you using?
Click to expand...
Click to collapse
Hi, Flash mode is working for me. I have recovered couple of times using flashtools in flash mode. But fastboot mode is not working for me. It says drivers are missing though I have installed drivers..
I went through tthe threads and could find a workking method to unlock the bootloader. Sony has too many appps which I do not need, I want to get rid of them as it consumes a lot of batttery. Hence a custom Rom with basic stuffs arre the soolution.
If you can help me unlock my BL I'd be thankful
And one more question, does TWRP's Latest version only works for Unlocked BL ?
ProudRed said:
Hi, Flash mode is working for me. I have recovered couple of times using flashtools in flash mode. But fastboot mode is not working for me. It says drivers are missing though I have installed drivers..
I went through tthe threads and could find a workking method to unlock the bootloader. Sony has too many appps which I do not need, I want to get rid of them as it consumes a lot of batttery. Hence a custom Rom with basic stuffs arre the soolution.
If you can help me unlock my BL I'd be thankful
And one more question, does TWRP's Latest version only works for Unlocked BL ?
Click to expand...
Click to collapse
First, Try to do things in order!!!
You are very messy, first you needed to unbrick the device, now you want to unlock its BL and want to know if you can install TWRP!
Install a stock firmware, make sure you can unlock the phone (by checking in the settings menu)...
And post some info...
In your device, open the dialler and enter *#*#7378423#*#* to access the service menu.
Tap Service info > Configuration > Rooting Status. If Bootloader unlock allowed says Yes, then you can continue with the next step. If it says No, or if the status is missing, your device cannot be unlocked.
aaronkatrini said:
First, Try to do things in order!!!
You are very messy, first you needed to unbrick the device, now you want to unlock its BL and want to know if you can install TWRP!
Install a stock firmware, make sure you can unlock the phone (by checking in the settings menu)...
And post some info...
In your device, open the dialler and enter *#*#7378423#*#* to access the service menu.
Tap Service info > Configuration > Rooting Status. If Bootloader unlock allowed says Yes, then you can continue with the next step. If it says No, or if the status is missing, your device cannot be unlocked.
Click to expand...
Click to collapse
Device unbricked, stock rom running with Root access and dual recovery installed. Fastboot drivers cant be installed, what to do ? And how to do ? OS Windows 10
All issues solved. On custom ROM now. Thank You to those who tried to help.
ProudRed said:
All issues solved. On custom ROM now. Thank You to those who tried to help.
Click to expand...
Click to collapse
Good for you, for anyone who needs to install fastboot driver on windows 10, when they cannot install they need to disable windows driver signature:
http://www.howtogeek.com/167723/how...8.1-so-that-you-can-install-unsigned-drivers/
Also for some who is in the same situation please post your solution, it helps the community.
P.S.: you can always hit that thanks button instead of thanking
I would like to know if there are custom kernels available for battery saving ? I flashed Zomie kernel and it was repeatedly booting my device into multirom recovery.
Right now I am on mokee, can I use any custom kernel with it ? If yes what ? I couldnt find many custom kernels for the device and what about Roms ? Not many custom Roms as well, only found RR and Mokee. Slim LP does not have a working link and couldnt find other popular roms too for this device.
I never tried new kernels, only thing install Kernel Adiutor and underclock, also change the governor mode.
As for the rom I use the modified stock rom by @androidexpert35, it provides good balance between performance and battery life. For any Rom you should write in their dedicated post. Keep experimenting but do it in a reasonable way and don't try to ask for everything, search and read others. Good luck
Related
I read through many threads and have followed the official Sony bootloader unlocking instructions. I have requested and received the unlock code from Sony via email. I have downloaded the inf file and placed it in the correct folder in Android SDK (which I also updated). But I am cannot access fastboot mode, I hold down Vol + and plug in the USB cable but the device shows a red led and goes into charging mode. Also the PC never prompts me to install fastboot driver it simply loads the SP as Sony mass storage device (in device manager).
I have read that some people seem to think that the SIM lock affects the ability to access fastboot but this SP is SIM unlocked. Sony's official guide to unlocking the bootloader says I need to access fastboot mode to enter the unlock code but how can I unlock the bootloader if I can't get into fastboot mode?
hmmm... don't know really... i once entered fastboot mode by mistake, while trying to root stock rom. wasn't reading instructions and put device in a fsatboot mode instead of debugging... was on stock rom so don't know if custom rom would let me do that. should check myself... if anything i know it is possible to get me that blue light shining.
To enter fastboot mode in Xperia SP just power down the phone and hold down the volume up key while pluging your phone into your pc
If you need flashmode do the same thing but with the volume DOWN button held down.
I´ve got the same problem. I can´t enter in flashmode neither in fastboot mode. I´m on windows 8 32bits and I installed the .245 Deodexed ROM with a problem on root and without CWM. I don´t know what to do now, please help me.
As I explained in the first post, I understand how to access fastboot mode (and flash mode). I got root and backed up the TA partition, the stock apps (from 1.257) and backed up the stock ROM. Then, after I wasn't able to get into fastboot, I have installed CWM for LB and flashed a custom ROM based on 2.245. I am able to enter flash mode but not fastboot. As I said before, the phone is SIM unlocked but is acting like it came from a carrier, with locked bootloader and fastboot disabled. How can Sony disable fastboot? I don't get it. Any one want to take a guess how long I will have to wait until some clever dev finds an exploit?
gandalf_grey91 said:
As I explained in the first post, I understand how to access fastboot mode (and flash mode). I got root and backed up the TA partition, the stock apps (from 1.257) and backed up the stock ROM. Then, after I wasn't able to get into fastboot, I have installed CWM for LB and flashed a custom ROM based on 2.245. I am able to enter flash mode but not fastboot. As I said before, the phone is SIM unlocked but is acting like it came from a carrier, with locked bootloader and fastboot disabled. How can Sony disable fastboot? I don't get it. Any one want to take a guess how long I will have to wait until some clever dev finds an exploit?
Click to expand...
Click to collapse
Sorry for that i dont think that it is your computers fault because you enter fastboot (and flashmode) using your mobile phone NOT your PC
So i would roughly assume that this is a Rom bug or something in the flashing proccess went wrong.
jackaros said:
Sorry for that i dont think that it is your computers fault because you enter fastboot (and flashmode) using your mobile phone NOT your PC
So i would roughly assume that this is a Rom bug or something in the flashing proccess went wrong.
Click to expand...
Click to collapse
Thanks for trying to help, but I understand that flashmode and fastboot are accessed using the phone. Actually the phone needs a piece of software like flashtool to keep it in flashmode otherwise it drops into charging mode. I didn't mention my computer so I don't know where you got that from.
As I explained, I am unable to access fastboot with stock ROM (1.257) and a custom ROM (based on 2.245) so it can't be a ROM bug or the flashing process having gone wrong.
if it's not too much of a trouble for you, go and flash .245 stock, than .257 stock kernel only. like you are trying to root it for the first time, complete rooting procedure, and than proceed on to installing CWM, but instead of connecting device in debugging mode to install CWM, try and see if you can put it in a fastboot. this was exactly the moment when i accidentally put mine SP in fastboot. of course, i'm not saying to go ahead and install anything if you score, but only to confirm if you can put your device into a fastboot mode since installing anything without CWM will likely soft brick your device.
Same problem here, i can't do anything using flashtool after flashed 2.245. I did with SUS, maybe is some flashtool issue.
Ze Tolas said:
Same problem here, i can't do anything using flashtool after flashed 2.245. I did with SUS, maybe is some flashtool issue.
Click to expand...
Click to collapse
It may be a flashtool problem you are right because 2 incidents with different Roms that both use flashtool to flash those roms.....
its pretty much self explenatory.
skojevac said:
if it's not too much of a trouble for you, go and flash .245 stock, than .257 stock kernel only. like you are trying to root it for the first time, complete rooting procedure, and than proceed on to installing CWM, but instead of connecting device in debugging mode to install CWM, try and see if you can put it in a fastboot. this was exactly the moment when i accidentally put mine SP in fastboot. of course, i'm not saying to go ahead and install anything if you score, but only to confirm if you can put your device into a fastboot mode since installing anything without CWM will likely soft brick your device.
Click to expand...
Click to collapse
Interesting. Ok, I've read up on the process. So I use the various stock .ftf files and flashtool with the phone in flash mode? Bear in mind that kernel didn't allow fastboot when I used it with the stock .257 ROM the device came with. If I do it, I will nandroid backup first, of course, but I think I remember reading in one thread that someone managed to soft brick their XSP doing this very thing.
Bear in mind that kernel didn't allow fastboot when I used it with the stock .257 ROM the device came with. [/QUOTE said:
that's why you need to complete rooting procedure. root stock 1.257 kernel, than back to stock 2.245 with root preserved, and before you would install CWM try to put device in a fastboot mode, this assuming you still have a UB.
Click to expand...
Click to collapse
have you tried to boot into android, open a root terminal and type
exec reboot bootloader
that should bring you straight into fastboot
SuicideFlasher said:
have you tried to boot into android, open a root terminal and type
exec reboot bootloader
that should bring you straight into fastboot
Click to expand...
Click to collapse
All that happens is that the terminal session ends and closes (not FC) the terminal app. Using the same command via adb just does a standard reboot.
i just placed my in a fastboot mode, no problems whatsoever. do you have drivers for the device installed? you will find these in flashtool installation folder.
skojevac said:
i just placed my in a fastboot mode, no problems whatsoever. do you have drivers for the device installed? you will find these in flashtool installation folder.
Click to expand...
Click to collapse
Yes. The fastboot_with_android_usb_file.rar package specified on DooMLoRD's bootloader unlocking/relocking appears to have been removed and there are no new links in that thread. So, I found and installed the drivers included with the flashtool. But it seems to be the device that is the problem. It is acting like a carrier locked model. I am rapidly starting to believe that this one has a locked bootloader.
gandalf_grey91 said:
Yes. The fastboot_with_android_usb_file.rar package specified on DooMLoRD's bootloader unlocking/relocking appears to have been removed and there are no new links in that thread. So, I found and installed the drivers included with the flashtool. But it seems to be the device that is the problem. It is acting like a carrier locked model. I am rapidly starting to believe that this one has a locked bootloader.
Click to expand...
Click to collapse
I said before, it's new firmware (maybe RU) with a Windows Flashtool issue. Today i did flash kernel to my SP using Linux client.
Same issues
gandalf_grey91 said:
All that happens is that the terminal session ends and closes (not FC) the terminal app. Using the same command via adb just does a standard reboot.
Click to expand...
Click to collapse
Hi, I have some similar issues. I've also been flashing some stuff and whenever I try to go to fastboot it just boots into CWM. Very annoying to say the least. The dark blue light goes on when i hold down volume up and for a short moment I see the fastboot driver installing on my computer. But before it completes it's already in CWM.
Not sure what to do from here on wards, maybe some advice on which kernel to flash? I am pretty sure the latest kernel I flashed is the .254 root kernel from doomlord.
Ps. I really would like to flash CM when it becomes available as nightly :angel:
Thanks in advance!
Fast boot mode for xperia ion hspa???
gandalf_grey91 said:
As I explained in the first post, I understand how to access fastboot mode (and flash mode). I got root and backed up the TA partition, the stock apps (from 1.257) and backed up the stock ROM. Then, after I wasn't able to get into fastboot, I have installed CWM for LB and flashed a custom ROM based on 2.245. I am able to enter flash mode but not fastboot. As I said before, the phone is SIM unlocked but is acting like it came from a carrier, with locked bootloader and fastboot disabled. How can Sony disable fastboot? I don't get it. Any one want to take a guess how long I will have to wait until some clever dev finds an exploit?
Click to expand...
Click to collapse
I had already installed cm10.1 jb for my xperia ion.
Now i tried to install cm11 kitkat for my xperia ion.
Every thing is gone good.
But now got stuck up with a problem.
fast boot mode is active only for 5 seconds while connecting my xperia ion to System with flash tool.
help me to do the need ful.
Guide me to download compatible drivers and flash tool for fast booting process.
If you have UNLOCKABLE bootloader, then you dont have a FASTBOOT mode on your phone. Its just pure luck. some phones dont have it... kind of a sony crap... I also happen to be one of those LUCKY ppl. no unlock, so stuck with Stock kernel forever.
When you connect your phone to Flashtools in FLASHMODE...
See for a string BOOTLOADER: NOT_ROOTABLE.... it means you belong in the lucky group...
If it says rootable, then you're doing something wrong.
Pardon me if i read something incorrect. i skimmed through all the posts before posting.
picked up a Z1 and went straight to rooting it.
rooted succesfully, installed the dualrecovery, and then attempted ot install VANIR only to realize that i did not unlock the bootloader.
so it will not turn on. holding power it vibrates every 2 seconds. plugged in it does teh same, but also blinks red.
i can get the computer to recognize it several different ways.
blue led- fastboot interface in device manager - not detected in adb devices
red/green/blank led - SOMC flash - no adb
PC companion is no go.
I have no idea where to go from here. I am currently downloading flashtool to see where that gets me, but I was hoping someone might have some direct and well known solution that i did not uncover in my searching..
Thanks
jewnersey said:
picked up a Z1 and went straight to rooting it.
rooted succesfully, installed the dualrecovery, and then attempted ot install VANIR only to realize that i did not unlock the bootloader.
so it will not turn on. holding power it vibrates every 2 seconds. plugged in it does teh same, but also blinks red.
i can get the computer to recognize it several different ways.
blue led- fastboot interface in device manager - not detected in adb devices
red/green/blank led - SOMC flash - no adb
PC companion is no go.
I have no idea where to go from here. I am currently downloading flashtool to see where that gets me, but I was hoping someone might have some direct and well known solution that i did not uncover in my searching..
Thanks
Click to expand...
Click to collapse
you have to flash a new firmware from flashtool.this will solve your problem.you cant enter to recovery?
Sent from my C6903 using XDA Premium 4 mobile app
Anonymuszymus said:
you have to flash a new firmware from flashtool.this will solve your problem.you cant enter to recovery?
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
He will not be able to enter recovery because dual recovery is system based which he cannot get to as its now trying to boot a custom kernel with a locked bootloader.
Also the recovery on a custom kernel is in the kernel, which also cannot boot. Hence a bootloop with no chance of recovery mode
The solution should be easy enough
Flash a stock FTF for your device using flashtool
gregbradley said:
He will not be able to enter recovery because dual recovery is system based which he cannot get to as its now trying to boot a custom kernel with a locked bootloader.
Also the recovery on a custom kernel is in the kernel, which also cannot boot. Hence a bootloop with no chance of recovery mode
The solution should be easy enough
Flash a stock FTF for your device using flashtool
Click to expand...
Click to collapse
downloading flashtool now.
Will flashtool recognize the phone even though adb does not?
this for ftf?
http://xperiafirmware.com/8-firmware/42-sony-xperia-z1-c6903
this for bootloader?
http://forum.xda-developers.com/showthread.php?t=2440597
jewnersey said:
downloading flashtool now.
Will flashtool recognize the phone even though adb does not?
this for ftf?
http://xperiafirmware.com/8-firmware/42-sony-xperia-z1-c6903
this for bootloader?
http://forum.xda-developers.com/showthread.php?t=2440597
Click to expand...
Click to collapse
Look in the general section for a sticky thread called FTF mega collection for the best FTF file for you.
Once you have flashed that then you should* root, then unlock the boot following the official sony instructions (http://bit.ly/1cebNlh).
once you have done that flash the boot.img of the rom you want to flash using fastboot them flash the update.zip in recovery
*The reason to root before unlocking the boot is to backup the DRM keys in your TA partition. If you do not do that you lose them forever.
Hi,
I just installed this rom:
http://forum.xda-developers.com/xperia-sp/development/final-solution-rom-lbl-t3073678
Everything went fine. I did all the steps. After installing the ROM and the fixes I chose system reboot from CWM Recovery. Since then I can't turn my phone on. If I press the power button there is a short vibration, but nothing happens.
1. Tried to reset with the button on the back of the phone. No go.
2. Tried all the button combination but can't even get back to recovery.
3. If I connect it to my computer then the led goes green and windows gives me that sound when you connect something new, but after 10 seconds the led turns off and I get the other sound for dismounting device. No diver can see it, neither flashtool does.
4. It doesn't charge. Well, at least the led does not turn on so I guess it's not charging.
Any idea?
You have a kernel problem, Flash with Flashtool the kernel of your rom in fastboot mode (Volume +, and connect your usb cable) with flashtool or if that don't available, flash a stock kernel in fastboot mode (Volume + and connect your usb cable at your phone), when it's flashed, restart your phone
Vic19911992 said:
You have a kernel problem, Flash with Flashtool the kernel of your rom in fastboot mode (Volume +, and connect your usb cable) with flashtool or if that don't available, flash a stock kernel in fastboot mode (Volume + and connect your usb cable at your phone), when it's flashed, restart your phone
Click to expand...
Click to collapse
From where can I get a proper kernel? Does it matter that it has locked bootloader?
Also which flashtool should work?
fishmong3r said:
From where can I get a proper kernel? Does it matter that it has locked bootloader?
Also which flashtool should work?
Click to expand...
Click to collapse
Normally, you can flash the kernel included in your rom, it's a file name boot.img, flashtool is good i think, can you send error messages with flashtool if you have any messages
fishmong3r said:
Hi,
I just installed this rom:
http://forum.xda-developers.com/xperia-sp/development/final-solution-rom-lbl-t3073678
Everything went fine. I did all the steps. After installing the ROM and the fixes I chose system reboot from CWM Recovery. Since then I can't turn my phone on. If I press the power button there is a short vibration, but nothing happens.
1. Tried to reset with the button on the back of the phone. No go.
2. Tried all the button combination but can't even get back to recovery.
3. If I connect it to my computer then the led goes green and windows gives me that sound when you connect something new, but after 10 seconds the led turns off and I get the other sound for dismounting device. No diver can see it, neither flashtool does.
4. It doesn't charge. Well, at least the led does not turn on so I guess it's not charging.
Any idea?
Click to expand...
Click to collapse
If you have locked bootloader you must flash the stock kernel trough the flashmode, williams kernel is custom it will brick your device
Spasik said:
If you have locked bootloader you must flash the stock kernel trough the flashmode, williams kernel is custom it will brick your device
Click to expand...
Click to collapse
I double checked that it works for locked bootloaded. It's even the name of the thread: [Final Solution ROM][UBL/LBL][V2][ODEXED for extreme smoothness][William's Kernel]
So the issue now is that I can't even install the driver (windows 10) as the device is being disconnected after 10 seconds of plugging in. I got the tft file now for the stock kernel and installed flashtool but it can't detect the phone (in that 10 secs), it says that driver is missing. Tried the C:\Flashtool\drivers\Flashtool-drivers.exe and selected the necessary drivers but it never succeeds. Attached the screenshot of the failure of installing the drivers.
fishmong3r said:
I double checked that it works for locked bootloaded. It's even the name of the thread: [Final Solution ROM][UBL/LBL][V2][ODEXED for extreme smoothness][William's Kernel]
So the issue now is that I can't even install the driver (windows 10) as the device is being disconnected after 10 seconds of plugging in. I got the tft file now for the stock kernel and installed flashtool but it can't detect the phone (in that 10 secs), it says that driver is missing. Tried the C:\Flashtool\drivers\Flashtool-drivers.exe and selected the necessary drivers but it never succeeds. Attached the screenshot of the failure of installing the drivers.
Click to expand...
Click to collapse
You must turn off driver verification, g00gle it
Spasik said:
You must turn off driver verification, g00gle it
Click to expand...
Click to collapse
OK, I'm getting closer. Thank you so far.
So drivers are installed. Computer can detect phone. All I can't do is to boot my phone to fast boot. It's always in flash mode not fast boot. I'm trying to power on and pushing the volume down, but no go.
Code:
26/049/2015 21:49:27 - INFO - Device connected in flash mode
26/049/2015 21:49:32 - INFO - Now plug your device in Fastboot Mode
fishmong3r said:
OK, I'm getting closer. Thank you so far.
So drivers are installed. Computer can detect phone. All I can't do is to boot my phone to fast boot. It's always in flash mode not fast boot. I'm trying to power on and pushing the volume down, but no go.
Code:
26/049/2015 21:49:27 - INFO - Device connected in flash mode
26/049/2015 21:49:32 - INFO - Now plug your device in Fastboot Mode
Click to expand...
Click to collapse
you must start with phone turned off, fastboot doesnt work because you have hardlocked bootloader
pick stock ftf of your choice let it load and when it prompts you connect turned off phone with volume- pressed
then root it with towelroot and install super su, open it and update su binary
when you will be done with that contact me or respond to this post i will help you with next steps
Spasik said:
you must start with phone turned off, fastboot doesnt work because you have hardlocked bootloader
pick stock ftf of your choice let it load and when it prompts you connect turned off phone with volume- pressed
then root it with towelroot and install super su, open it and update su binary
when you will be done with that contact me or respond to this post i will help you with next steps
Click to expand...
Click to collapse
OK, to be honest I don't get any of that. What is towelroot, how to install super su and how to update its binary? Also what do you mean "let it load" (ftf)?
I have to mention that the bootloader is locked because it can't be unlocked.
fishmong3r said:
OK, to be honest I don't get any of that. What is towelroot, how to install super su and how to update its binary? Also what do you mean "let it load" (ftf)?
I have to mention that the bootloader is locked because it can't be unlocked.
Click to expand...
Click to collapse
Yeah i know that your bootloader is not unlockable, by ftf loading i mean that select .ftf you want to flash first and wait until it prepares and prompts you to connect the phone, btw last flashtool that works with sp is flashtool-0.9.18.6 , if you will have problem with understanding that try to search how to flash ftf on xperia sp on youtube i hope you will get it eventually
towelroot is an app from geohot you can get it here https://towelroot.com/ it can root your device
super su is an app on google play it is free and it controls root apps, in other words it grants or denies root access, once you will gain root with towelroot, open super su and it will prompt you to update binary just select normal and it will work
Spasik said:
Yeah i know that your bootloader is not unlockable, by ftf loading i mean that select .ftf you want to flash first and wait until it prepares and prompts you to connect the phone, btw last flashtool that works with sp is flashtool-0.9.18.6 , if you will have problem with understanding that try to search how to flash ftf on xperia sp on youtube i hope you will get it eventually
towelroot is an app from geohot you can get it here https://towelroot.com/ it can root your device
super su is an app on google play it is free and it controls root apps, in other words it grants or denies root access, once you will gain root with towelroot, open super su and it will prompt you to update binary just select normal and it will work
Click to expand...
Click to collapse
I have version 0.9.19.10. And I can't select the file before I connect the phone with fastboot. The file has to be selected after. This is the tutorial I try to follow:
https://www.youtube.com/watch?v=IXTzA7Qrrv4
So my problem is still that I can't get into fastboot to flash the kernel. So towelroot and super su are not my options until I can't get into the system.
Any other clue on how to get it flashed?
fishmong3r said:
I have version 0.9.19.10. And I can't select the file before I connect the phone with fastboot. The file has to be selected after. This is the tutorial I try to follow:
https://www.youtube.com/watch?v=IXTzA7Qrrv4
So my problem is still that I can't get into fastboot to flash the kernel. So towelroot and super su are not my options until I can't get into the system.
Any other clue on how to get it flashed?
Click to expand...
Click to collapse
you cant use fastboot with your bootloader locked that is the point there is NO WAY of flashing custom kernel with bootloader locked or you will brick your device, only way to flash kernel on lbl is to flash stock kernel in your case WITH FLASHTOOL TROUGH FLASHMODE
https://www.youtube.com/watch?v=Sz3LVw_MfzQ this may help you understand what i am trying to tell you
Spasik said:
you cant use fastboot with your bootloader locked that is the point there is NO WAY of flashing custom kernel with bootloader locked or you will brick your device, only way to flash kernel on lbl is to flash stock kernel in your case WITH FLASHTOOL TROUGH FLASHMODE
https://www.youtube.com/watch?v=Sz3LVw_MfzQ this may help you understand what i am trying to tell you
Click to expand...
Click to collapse
I understand what you are saying. But flashtool doesn't let me flash kernel in flash mode.
So it's a catch 22? After all this means that it's already bricked, isn't it?
fishmong3r said:
I understand what you are saying. But flashtool doesn't let me flash kernel in flash mode.
So it's a catch 22? After all this means that it's already bricked, isn't it?
Click to expand...
Click to collapse
You are not trying to flash kernel only, but that is possible too, you are trying to flash whole stock firmware.
Yes your phone is bricked because you flashed custom kernel on LBL.
Download some .205 or .207 firmware from android development section of xperia sp xda forum and flash it with flashtool.
There are plenty of tutorials online, i dont mean to be rude but you just must try and understand it yourself.
Here you have link for firmwares http://forum.xda-developers.com/showthread.php?t=2311964
just flash the ftf and phone should be ok, if you will be succesfull i can help you with rooting and flashing something suitable for locked bootloader xperia sp
Good luck
Spasik said:
You are not trying to flash kernel only, but that is possible too, you are trying to flash whole stock firmware.
Yes your phone is bricked because you flashed custom kernel on LBL.
Download some .205 or .207 firmware from android development section of xperia sp xda forum and flash it with flashtool.
There are plenty of tutorials online, i dont mean to be rude but you just must try and understand it yourself.
Here you have link for firmwares http://forum.xda-developers.com/showthread.php?t=2311964
just flash the ftf and phone should be ok, if you will be succesfull i can help you with rooting and flashing something suitable for locked bootloader xperia sp
Good luck
Click to expand...
Click to collapse
Wait a sec. It seems I could flash the kernel in flash mode.
It was keep disconnecting but finally the sony logo appeared and it booted to the system. It doesn't work properly, and it's very slow, but now I can get into CWM. Do you have any suggestion which ROM should I install on it?
fishmong3r said:
Wait a sec. It seems I could flash the kernel in flash mode.
It was keep disconnecting but finally the sony logo appeared and it booted to the system. It doesn't work properly, and it's very slow, but now I can get into CWM. Do you have any suggestion which ROM should I install on it?
Click to expand...
Click to collapse
yes
this is debloated stock http://forum.xda-developers.com/xperia-sp/development/rom-binomical-v1-1-final-t3111555
works great
and this is lbl cm11 http://forum.xda-developers.com/xperia-sp/development/rom-cyanogenomod-11-xperia-sp-t3041391
great aosp rom for lbl device
Spasik said:
yes
this is debloated stock http://forum.xda-developers.com/xperia-sp/development/rom-binomical-v1-1-final-t3111555
works great
and this is lbl cm11 http://forum.xda-developers.com/xperia-sp/development/rom-cyanogenomod-11-xperia-sp-t3041391
great aosp rom for lbl device
Click to expand...
Click to collapse
OK, I will do that part tomorrow. I'm a bit tired of all this sh*t.
Thank you for all your help, I do really appreciate it.
fishmong3r said:
OK, I will do that part tomorrow. I'm a bit tired of all this sh*t.
Thank you for all your help, I do really appreciate it.
Click to expand...
Click to collapse
No problem, no need to thank me just hit thanks button, I'm glad I helped you
I was trying to install Arrow OS custom ROM to Motorola one power using TWRP. It got flashed, when I flashed the Gpps Rom with it, it didn't flashed and I rebooted the phone right there. The phone is now in a hard brick mode and is not responding to anything, is there anything I can do to fix it? Could you please guide me with the complete procedure?
You must use a blankflash to boot bootloader.BlankFlash available for
Moto One Power (Chef) https://mirrors.lolinet.com/firmware/moto/chef[/
.1 install Motorola drivers,2 install quallcom drivers for Motorola procesor(gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows) .3 use flashbat in blankflash directory,4 press volume down and power on phone.5 connect phone with pc and proces will be starting.if your phone starting in bootloader mode ,you can flash stock room
Thank you for your help and response. I followed the steps as you mentioned. On step 3 when I run the Flashbat file, It gives the below error, and the phone never started
[112.478] ReadFile() failed, GetLastError()=0
[125.434] ReadFile() failed, GetLastError()=0
when blankflash starting you can release the wolume and power.try differrent usb port in pc.I have the same problem with custom roms,You see port com in device manager on pc?
It worked, but how did you know all this? Just spot on :good:
I tried this method but not working on my phone, xt1942-1. This is the Chinese version p30 note I got from AliExpress. I see the device in device manager as port 9008
Any help would be appreciated!
Hi,you are try change a port USB in PC?this method works,my phone is the same like your,Moto p30 note from aliexpress
Thanks, I tried all usb ports on my pc but same problem. Should we press power and volume down buttons after connecting to pc? Please help I just got this phone today and bricked right away ...
Also there are two blankfash versions on the link you provided which one to use?
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
dadm said:
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
Click to expand...
Click to collapse
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
htcmusic said:
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
Click to expand...
Click to collapse
Hi @dadm I could not get my SIM card detected in RR rom and tried to flash stock again. Now I am in a bootloop whatever I do. Which stock did you use to revert back? And is your SIM card detected?
I have a few questions if anyone could answer. I am looking to get hands on this phone but making sure everything goes as I expect.
1.Does any member have knowledge which of this Device variants (XT1942-1, XT1942-2, XT-942-3) qualify for "Unlocking Boot-loader" and which variant does not support unlocking. I am lookig for 4/64gb Chef.
2. Is there Any Custom Pie Rom with Solid stability + Efficient & Effective Kernel?
3. Does stock Motorola Camera app works 100% in a custom flashed Rom as it does in Stock Rom or we have to use Google Pixel Camera apps as an alternative?
4. Is there anyway to get back to stock image from Custom rom.
5. How to recover the device from a Hard Brick.
6. Not but least. How well this device performs while playing PUBG.
Phone flashing locked and stuck at fastboot mode
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Ravi2730 said:
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Click to expand...
Click to collapse
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Thanks for reply
sd_shadow said:
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Problem solved
Ravi2730 said:
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Click to expand...
Click to collapse
Anyone stuck in fastboot when it shows your phone is corrupt and will not boot just flash the command
fastboot boot boot.img file in stock room phn will automatically start everything working it work as a flash...?
Hey i spend today a lot of time to tried to fix my bricked Redmi Note 10 5G.
I just wanted to unroot my phone but i did something wrong.
First problem i have is the dm-verity corrupt.
So i read and tried this
https://forum.xda-developers.com/t/...g-bricked-but-has-access-to-fastboot.4366655/
Without succes i flashed the right firmware for my device many times but the dm-verity corrupt is still there and then i keeps hanging in the redmi boot logo.
But i dont know how but now i also got my bootloader locked so now i cant flash any thing.
And the dm-verity corrupt and keeps hanging on the redmi bootlogo.
So i hope some one have an solution for me and can help me and fix my phone.
u have made a common mistake. u have flashed firmware with miglash, without change default option to flash all. you have select flash all and lock. so yout phone is hard bricked. i think theres a guide to solve this. search on this forum
wetito said:
u have made a common mistake. u have flashed firmware with miglash, without change default option to flash all. you have select flash all and lock. so yout phone is hard bricked. i think theres a guide to solve this. search on this forum
Click to expand...
Click to collapse
Hey thanks for the reply
i know i made a mistake and i search and tried anything what i thougt it is maybe a solution on this forum.
Bun without any succes and because my bootloader is locked now i cant do anything in the fastboot.
i dont know how to unlocked now.
Because the bootloader is locked now i think i have the Guarantee now but if the i boot the phone the dm-verity corrupt message is still there and then it keeps hangin on the redmi logo.
So if there is no way to fix it i think go trie it to bring it to the store where i bought it 2 months ago.
i think you can solve using mtk spflash tool
look here, u can find the solution
Soft Bricked Phone
Hello, I need help. I tried to flash back to stock firmware using mi flash tool but it said error and it failed. I tried to flash again and then it didn't detect the device. It rebooted on its own and now it's stuck on bootloop with black...
forum.xda-developers.com
Hey thanks for the
wetito said:
i think you can solve using mtk spflash tool
look here, u can find the solution
Soft Bricked Phone
Hello, I need help. I tried to flash back to stock firmware using mi flash tool but it said error and it failed. I tried to flash again and then it didn't detect the device. It rebooted on its own and now it's stuck on bootloop with black...
forum.xda-developers.com
Click to expand...
Click to collapse
Hey thnks gor this guide but i cant get it found it in the sp flash tool.
I dont get my phone in the BRom mode to find it so im stuck there tried servel of times when it power of to get my phone BRom mode how dos the screen look if its in BRom mode ?
By pressing the vol + vol - and pwr button when its off id ont get it in the BRom Mode.
Also i googled the sp flash tool to download it so maybe i dont have tight one do you have mabe some links for me?
Or is there maybe a other way to fix my phone?
try this tool. seems very good. but i didn't never used. so you had to try by yourself. it have many interesting and usefull function
Home - Tool All In One
TOOL ALL IN ONE This tool support 67 different devices of some different OEMs. DOWNLOAD CHANGELOG XDA THREAD OTHERS PROJECTS
toolaio.tk
wetito said:
try this tool. seems very good. but i didn't never used. so you had to try by yourself. it have many interesting and usefull function
Home - Tool All In One
TOOL ALL IN ONE This tool support 67 different devices of some different OEMs. DOWNLOAD CHANGELOG XDA THREAD OTHERS PROJECTS
toolaio.tk
Click to expand...
Click to collapse
That also didn't work do i go to reseller today and hope i hot a new one of the gonna fix it.
Becuase the bootloader is locked again warrenty only the dm-verification message is there.
Do gonna say i updated my phone and now its not booting anymore.
Or do you or maybe some one do have an tutorial program or tool to fix it.
Download ROM for your phone and extract to desktop. Reboot to fastboot and open flashall.bat. it should run firmware through and reflash phone completely. Boot phone and on boot screen keep pressing power so phone can boot and bypass DM Verity error. Once booted reboot into fastboot again and enter fastboot oem cdms. Reboot phone and DM Verity should be gone.
passion8059 said:
Download ROM for your phone and extract to desktop. Reboot to fastboot and open flashall.bat. it should run firmware through and reflash phone completely. Boot phone and on boot screen keep pressing power so phone can boot and bypass DM Verity error. Once booted reboot into fastboot again and enter fastboot oem cdms. Reboot phone and DM Verity should be gone.
Click to expand...
Click to collapse
we repeats same anawers continuosly.i dont understand why some users decide to mod their devices, if they dont know how to use Google, and don't understand how to follow the flashing guides step by step. and finally after flashing custom rom, they ask how back to stock
wetito said:
we repeats same anawers continuosly.i dont understand why some users decide to mod their devices, if they dont know how to use Google, and don't understand how to follow the flashing guides step by step. and finally after flashing custom rom, they ask how back to stock
Click to expand...
Click to collapse
Get what you are saying, think there is at least 8 threads on same topic.
Hey thanks for the answers and the things i could tried to fix my phone.
im not a noob with rooting and flashing android phones before i do flasshong or rooting and the other stuff i always read and check the xda forum before i do.
With other android phones that i had before i made some misstakes before but like a bootloop or something else that the phone not was booting but always i can fix the phone.
So the problem what i had with my Redmi note 10 5G and not one solution that i found on xda or something that maube could fix the problem nothing could fix it.
So i a couple of week ago i went to the reseller and they send it to a repair center.
I think the coudnt also fix it because the did a boardswap.
I think if they cam fix it with a tool or software and reflashing the phone they did.
Now i wait some time before i go rooting or flashing stuff on my phone i hope there will be good twrp so thning go musch easier in the future to fix stuuf like (DM-VERITY Corruption.
twrp is not necessary. fix dm-verity is easy. the are MANY MANY MANY post where is explained how to do. root new phones is dofferent but not complicated. magisk works fine if installed following the latest guides. it's impossible damage mainbord after a root procedure. sure you didnt follow the guides with attention. i have rooted my global phone many times without problems. simply you have made a bad flash of vbmeta or product partition. you made a big mistake, cause this devices can be rooted without brick