Database Develop

[Q] Headset jack permanently damaged?

I was using my skullcandy headset on my phone and everything was working fine, until I (like an idiot) tried to adjust the headset gain value while the headset was plugged in. Then, I could hear buzzing in my earphones and when I plug it in, it says headset not supported. I tried a clean flash of the ROM to no avail. Then I flashed the Z3 sound files and tried, and it worked for a bit, but the sound was coming from both the headset and the speaker. So assuming it was an issue with the Z3 sound files, I flashed back the Stock sound files for mono. Now, it's not recognizing and headset or headphones(which was previously working when the headset wasn't being recognized) and when I pull it out of the jack, it says headset not recognized. Have I broken my headset jack? I use my phone for music, and this is really important. I'm praying I haven't and that there's a fix. Please help..

AnrgKrshn said:
I was using my skullcandy headset on my phone and everything was working fine, until I (like an idiot) tried to adjust the headset gain value while the headset was plugged in. Then, I could hear buzzing in my earphones and when I plug it in, it says headset not supported. I tried a clean flash of the ROM to no avail. Then I flashed the Z3 sound files and tried, and it worked for a bit, but the sound was coming from both the headset and the speaker. So assuming it was an issue with the Z3 sound files, I flashed back the Stock sound files for mono. Now, it's not recognizing and headset or headphones(which was previously working when the headset wasn't being recognized) and when I pull it out of the jack, it says headset not recognized. Have I broken my headset jack? I use my phone for music, and this is really important. I'm praying I haven't and that there's a fix. Please help..
Click to expand...
Click to collapse
So looks like u have unlocked bootloader?
maybe refresh the kernel?

KWOKSFUNG said:
So looks like u have unlocked bootloader?
maybe refresh the kernel?
Click to expand...
Click to collapse
I do have an unlocked bootloader. I flashed v15 and it seems to be working with headphones (which don't have an inline mic) haven't tested the headset for fear of losing even headphones functionality. I'll test headset in the evening and if it doesn't work, I'll try a reflash of the kernel.
Is headset functionality also tied to kernel? I thought it was a ROM function. Really appreciate the help

AnrgKrshn said:
I do have an unlocked bootloader. I flashed v15 and it seems to be working with headphones (which don't have an inline mic) haven't tested the headset for fear of losing even headphones functionality. I'll test headset in the evening and if it doesn't work, I'll try a reflash of the kernel.
Is headset functionality also tied to kernel? I thought it was a ROM function. Really appreciate the help
Click to expand...
Click to collapse
If u are saying the the stereo mod v15, it is a bit buggy
i got left side and right side volume different = =""
this version may messed up with kernel volume control a bit
yeah everything is finally controlled by the kernel actually
Try using pimp my z1 and set value in Headphone analog gain, it fixed the s**t up (for me)
or if u want good and stable music quality, use dreamingonmusic v11z

KWOKSFUNG said:
If u are saying the the stereo mod v15, it is a bit buggy
i got left side and right side volume different = =""
this version may messed up with kernel volume control a bit
yeah everything is finally controlled by the kernel actually
Try using pimp my z1 and set value in Headphone analog gain, it fixed the s**t up (for me)
or if u want good and stable music quality, use dreamingonmusic v11z
Click to expand...
Click to collapse
I'll try the headset, see if it works, if not,reflash stock sound files, see if it works, if not reflash kernel. Thanks for all the help man, really appreciate it, you're awesome!
The problem arose when I tried changing the value on pimp my Z1 while the headset was connected. So I'm not playing with the pimp my Z1 settings anymore. Uninstalled it.

AnrgKrshn said:
I'll try the headset, see if it works, if not,reflash stock sound files, see if it works, if not reflash kernel. Thanks for all the help man, really appreciate it, you're awesome!
The problem arose when I tried changing the value on pimp my Z1 while the headset was connected. So I'm not playing with the pimp my Z1 settings anymore. Uninstalled it.
Click to expand...
Click to collapse
Maybe u should refresh the rom without any mod to test it instead, becoz the "stock mod" may not be able to completely clean off the s**ts

KWOKSFUNG said:
Maybe u should refresh the rom without any mod to test it instead, becoz the "stock mod" may not be able to completely clean off the s**ts
Click to expand...
Click to collapse
I reflashed the ROM. I'm hoping flashing the kernel fixes it.

Thanks man, narrowed down the issue. My headset is ****ed. The second I connect it, it's ****ing everything up. So that's the culprit. Simple reboot fixes it and I can use headphones.
Thanks so much for your help, unfortunately even a kernel reflash didn't help. I botched something with the headset when I adjusted the output while connected. Thanks a ton for your help and support. This is why I love xda. The power of the community.
Thanks a bunch.
Anurag.

AnrgKrshn said:
Thanks man, narrowed down the issue. My headset is ****ed. The second I connect it, it's ****ing everything up. So that's the culprit. Simple reboot fixes it and I can use headphones.
Thanks so much for your help, unfortunately even a kernel reflash didn't help. I botched something with the headset when I adjusted the output while connected. Thanks a ton for your help and support. This is why I love xda. The power of the community.
Thanks a bunch.
Anurag.
Click to expand...
Click to collapse
Haha u're welcome and i'm just a noob here XDXD (compared to those devs)
so your headphone is dead? i'm sorry to hear that

KWOKSFUNG said:
Haha u're welcome and i'm just a noob here XDXD (compared to those devs)
so your headphone is dead? i'm sorry to hear that
Click to expand...
Click to collapse
Yeah, I'll have to get a new one

AnrgKrshn said:
Yeah, I'll have to get a new one
Click to expand...
Click to collapse
Oh hope it isnt expensive

Sound/Visualization Mods

So far I've tried a ported Sony Walkman apk with various old school sound mods (xLoud & Clearaudio+, Beats), then Apollo with HTK audio engine, then ViPER4Android. I can't tell if any of them worked, which usually I can tell. I think it's because the sound from the PURE's speakers is already pretty loud, and much better sounding then my original Moto X's? I used the selinux app for ViPER4Android, and HTK audio engine apparently doesn't require the selinux mode change. I'm gonna play around later with my Bluetooth headphones to see if I can notice it better. I think the speakers/drivers are pretty damn good, can't wait to see how much better they can get, being an audio enthusiast. Thoughts, input, ideas?:silly:
Edit: I plan on adding the "known" working music mods/apk's/etc.....
mixer_paths.xml VOLUME BOOST
XTREMEMusic
Xperia Z3 WALKMAN and MODS
ViPER4Android
HTK audio engine
SONY graphics

Tried using viper on stock and it sounded god awful. It didnt improve the sound one bit and instead made it sound super tinny to where some songs would hurt my ears. It did work on AICP though, but its still to buggy for me to use as a daily.

juanacevedo said:
Tried using viper on stock and it sounded god awful. It didnt improve the sound one bit and instead made it sound super tinny to where some songs would hurt my ears. It did work on AICP though, but its still to buggy for me to use as a daily.
Click to expand...
Click to collapse
Thanks for the input! I still can't tell a difference. I did however flash THIS and it seemed to work. I had the "color mode" set to normal instead of vibrant since I didn't think vibrant made it any better. But I flashed the Sony zip and it seems much better.....

gokart2 said:
Thanks for the input! I still can't tell a difference. I did however flash THIS and it seemed to work. I had the "color mode" set to normal instead of vibrant since I didn't think vibrant made it any better. But I flashed the Sony zip and it seems much better.....
Click to expand...
Click to collapse
Interesting, would you say the difference is very noticeable? I remember using something like this on the optimus4x and it made it look nicer but I'm not sure if it was a placebo or not haha

Been using XtremeMusic Mod with Project Desire and V4A and loving the audio quality. Takes some tuning but sounds fantastic on speaker, headphones, and in my cars Bluetooth. Increases the speaker volume greatly without distortion too.
Sent from my XT1575 using Tapatalk

TGtheImmortal said:
Been using XtremeMusic Mod with Project Desire and V4A and loving the audio quality. Takes some tuning but sounds fantastic on speaker, headphones, and in my cars Bluetooth. Increases the speaker volume greatly without distortion too.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
DUDE! I just have to say, thank you for linking that mod! Originally viper did not work at all for me on stock but after installing these mods, sound quality is now amazing! It's the best on any phone I've had so far.
Everyone go flash this!

juanacevedo said:
DUDE! I just have to say, thank you for linking that mod! Originally viper did not work at all for me on stock but after installing these mods, sound quality is now amazing! It's the best on any phone I've had so far.
Everyone go flash this!
Click to expand...
Click to collapse
Very welcome. Its amazing so glad it was useful to you!

Ok..... I was able to increase the volume by editing the mixer_paths.xml similar to the way it's listed on the net everywhere. Only tested the phone speakers and bluetooth, not headphones. Was kinda scared so I only increased everything by "2". That was noticeable and good enough for now.
1. Using your favorite file explore go to = system/etc/mixer_paths.xml
2. Increase the highlighted area parameters in the pic below. I increased everything by only ''2''.
GO IN SMALL STEPS. I DON"T KNOW WHICH PARAMETER IS WHAT SPEAKER..... OR WHEN IT WILL BREAK SOMETHING!!
I WILL NOT BE RESPONSIBLE FOR BLOWING YOUR SPEAKERS OR EARDRUMS!!

I tried to install XtremeMusic Mod, Project Desire and V4A, but V4A is not working, NEON is showing as NO. I followed all their instructions and XtremeMusic app is showing that it is on. Have you guys had this problem or did you have to do something different to the instructions to get it working?

ioneng said:
I tried to install XtremeMusic Mod, Project Desire and V4A, but V4A is not working, NEON is showing as NO. I followed all their instructions and XtremeMusic app is showing that it is on. Have you guys had this problem or did you have to do something different to the instructions to get it working?
Click to expand...
Click to collapse
I installed it like the post specified, and it sure seems like its working. I haven't adjusted the EQ though. What do u mean neon=no?

TGtheImmortal said:
Been using XtremeMusic Mod with Project Desire and V4A and loving the audio quality. Takes some tuning but sounds fantastic on speaker, headphones, and in my cars Bluetooth. Increases the speaker volume greatly without distortion too.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
this is what I have for past month along with dolby atmos (v4a+atmos)
sometimes I feel like there is to much bass so I try to tweak it from time time I use bluetooth earphones (jabra rox)
ioneng said:
I tried to install XtremeMusic Mod, Project Desire and V4A, but V4A is not working, NEON is showing as NO. I followed all their instructions and XtremeMusic app is showing that it is on. Have you guys had this problem or did you have to do something different to the instructions to get it working?
Click to expand...
Click to collapse
neon shows for me no however under normal mode works just fine there isn't any other solution I know for NORMAL mode to work on stock rom at least.

gokart2 said:
I installed it like the post specified, and it sure seems like its working. I haven't adjusted the EQ though. What do u mean neon=no?
Click to expand...
Click to collapse
Inside V4A, if you check driver status, it says NEON=NO instead of yes.
patt2k said:
this is what I have for past month along with dolby atmos (v4a+atmos)
sometimes I feel like there is to much bass so I try to tweak it from time time I use bluetooth earphones (jabra rox)
neon shows for me no however under normal mode works just fine there isn't any other solution I know for NORMAL mode to work on stock rom at least.
Click to expand...
Click to collapse
Do you mean that V4A works for you fine even when NEON is no? I haven't tested it extensively because I gave up once seeing the "No" hehe. I'll give it a try now and see whether V4A is really working. I do think however, that XtremeMusic Mod is working, my bluetooth buds sounds much better than before I flashed them. So even if V4A is not working, I can just wait for them to find a fix.

ioneng said:
Inside V4A, if you check driver status, it says NEON=NO instead of yes.
Do you mean that V4A works for you fine even when NEON is no? I haven't tested it extensively because I gave up once seeing the "No" hehe. I'll give it a try now and see whether V4A is really working. I do think however, that XtremeMusic Mod is working, my bluetooth buds sounds much better than before I flashed them. So even if V4A is not working, I can just wait for them to find a fix.
Click to expand...
Click to collapse
Exactly it shows neon-no and it works.

patt2k said:
Exactly it shows neon-no and it works.
Click to expand...
Click to collapse
I just noticed that when I play a song, v4a shows "processing=no" as well. My conclusion is that when we flashed "XtremeMusic Mod with Project Desire and V4A", the "XtremeMusic Mod with Project Desire" part did stick, but not the fixed V4A version. So the sound enhancement we can hear is from the first 2 mods only. I tried increasing/decreasing bass in V4A and there was no audible difference.

is anyone able to get walkman working on stock? It seems to bootloop in the presence of lucky patcher.
UPDATE: I'm able to get the standalone 9.0.2A to work, but not the 3.5 Z3 package

ioneng said:
I just noticed that when I play a song, v4a shows "processing=no" as well. My conclusion is that when we flashed "XtremeMusic Mod with Project Desire and V4A", the "XtremeMusic Mod with Project Desire" part did stick, but not the fixed V4A version. So the sound enhancement we can hear is from the first 2 mods only. I tried increasing/decreasing bass in V4A and there was no audible difference.
Click to expand...
Click to collapse
I was having the same issue but managed to get it to start working.
Steps I took:
* Uninstall V4A Drivers
* Reboot to recovery
* Re-install XtremeMusic
* WIPE CACHE/DALVIK
* Re-install V4A and drivers (mine got uninstalled in the process of flashing XM)
* Reboot
* Set SELinux to Permissive
* Play some music and open V4A to verify V4A is working (I have mine set to Compatible and Forced)
* Open XM and turn on
Hopefully this works for anyone else having issues as well. Relatively simple fix but it worked for me.

Been using this Viper, Atmos, Beats installer for the last few weeks and it's fantastic. Developer is actively developing with a new version nearly every day (at this point mostly small tweaks to increase compatibility across devices). I'm on the latest version (3.7) with no problems. Wipe dalvik and cache, flash, reboot.
http://forum.xda-developers.com/showthread.php?p=57021246
mxpe 6.0

ffejy462 said:
Been using this Viper, Atmos, Beats installer for the last few weeks and it's fantastic. Developer is actively developing with a new version nearly every day (at this point mostly small tweaks to increase compatibility across devices). I'm on the latest version (3.7) with no problems. Wipe dalvik and cache, flash, reboot.
http://forum.xda-developers.com/showthread.php?p=57021246
mxpe 6.0
Click to expand...
Click to collapse
This works pretty good IMO!:good:

gokart2 said:
Ok..... I was able to increase the volume by editing the mixer_paths.xml similar to the way it's listed on the net everywhere. Only tested the phone speakers and bluetooth, not headphones. Was kinda scared so I only increased everything by "2". That was noticeable and good enough for now.
1. Using your favorite file explore go to = system/etc/mixer_paths.xml
2. Increase the highlighted area parameters in the pic below. I increased everything by only ''2''.
GO IN SMALL STEPS. I DON"T KNOW WHICH PARAMETER IS WHAT SPEAKER..... OR WHEN IT WILL BREAK SOMETHING!!
I WILL NOT BE RESPONSIBLE FOR BLOWING YOUR SPEAKERS OR EARDRUMS!!
Click to expand...
Click to collapse
I have edited the lines that you have in your screenshot and I haven't heard an increase in my headphones nor speakers at all. Were/are there any other lines that need to be edited in the mixer_paths.xml file (such as the section beginning with '<path name="headphones">'?
Do you have any recommended values that you changed yours to in order to hear a difference? Thanks!

rob.allen78 said:
I have edited the lines that you have in your screenshot and I haven't heard an increase in my headphones nor speakers at all. Were/are there any other lines that need to be edited in the mixer_paths.xml file (such as the section beginning with '<path name="headphones">'?
Do you have any recommended values that you changed yours to in order to hear a difference? Thanks!
Click to expand...
Click to collapse
I honestly was copying a mod from a Nexus device and I think I was tricking myself into noticing a volume increase. :silly:

Audio Bug in Oero Open Beta & Leak Beta

Sometimes when I use my headphone and switch in different songs or apps that use audio output, there will be a difference of volume between the left and right channels. I have to stop my music for about 5 seconds to recover to the normal output.

aegoyu said:
Sometimes when I use my headphone and switch in different songs or apps that use audio output, there will be a difference of volume between the left and right channels. I have to stop my music for about 5 seconds to recover to the normal output.
Click to expand...
Click to collapse
I thought i was alone who is facing this issue .

Same here, while playing games there's a lag in Bullet sounds, Thought i'm the only one.

i dont think its a bug
in the accessibility setting there is an option called
Mono Audio
turn it of and i think everything will be ok

Kellwa said:
i dont think its a bug
in the accessibility setting there is an option called
Mono Audio
turn it of and i think everything will be ok
Click to expand...
Click to collapse
It's definitely a bug which only exists in Oero builds. You shouldn't give up your right to enjoy stereo music to escape from facing this bug. :crying:

Moreover, sometimes the audio stops from reproducing through the speakers and reproduces from the earpiece... Have to reboot to fix it temporarily.

Hi. I have the same problem too.
Sent from my [device_name] using XDA-Developers Legacy app

aegoyu said:
It's definitely a bug which only exists in Oero builds. You shouldn't give up your right to enjoy stereo music to escape from facing this bug. :crying:
Click to expand...
Click to collapse
as far as i know Mono Audio mean NOT stereo but only 1 speaker
so if its ENABLED thats mean you will hear from one speaker only
but DISABLE it and your stereo should be ok
i think Oneplus put this option because they have only one speaker in the phone
and to make all the sound come from it they combined the
2 stereo channels in one using this option

Kellwa said:
as far as i know Mono Audio mean NOT stereo but only 1 speaker
so if its ENABLED thats mean you will hear from one speaker only
but DISABLE it and your stereo should be ok
i think Oneplus put this option because they have only one speaker in the phone
and to make all the sound come from it they combined the
2 stereo channels in one using this option
Click to expand...
Click to collapse
You misunderstood the bug. Mono Audio is disabled by default. This bug has nothing with the opinion.

I am facing this too , i thought either my earphones have gon e bad or jack has fried. So its a software issue i belive.

aegoyu said:
You misunderstood the bug. Mono Audio is disabled by default. This bug has nothing with the opinion.
Click to expand...
Click to collapse
sorry if i misunderstood

Hi all, do you use YouTube Vanced? Now i'm using O beta 2: i downloaded: iYTBP-v12.45.56-b01.12.00-minAPI21-arm64-v8a-alldpi-black-v2.7-vanced.apk and replace it in System/app/Youtube but fail. I see in the Appdrawer does not display the name Youtube. It's just "ani", and it will force closed when I click on it.
Pls help me if you know this bug. tks you

◇Stereo Dual Speakers Surround Sound♤N910F/T/P/V/G/W8♤N910C/H

DISCLAIMER=WARNING PLEASE FLASH ON YOUR OWN RISK AND MAKE SURE TO HAVE A BACKUP ROM BEFORE TRY IT JUST INCASE IF ANYTHING GOES WRONG.AND DONT BLAME ME IF YOUR SPEAKERS OR EARS DAMAGE BY THIS MOD IF YOU RAISE VOLUME TO MAX BECAUSE IT'S EXTREMELY LOUD.
Hello xda members.
If you want to get surround volume stereo speakers from note 4 like iphone7+/htc boom sound stereo this is a right place this mod will give you stereo surround sound from back speaker and front ear speaker and surround loud sound from headphones and also when your phone will ring the ring tone and notification sound will come from both back and front speakers
AFTER FLASHING IF YOU WANT TO CONFIRM THAT BOTH SPEAKERS FRONT AND BACK WORKING TOGETHER JUST PLAY ANY SONG OR RING TONE THEN COVER THE BACK MAIN SPEAKER WITH YOUR FINGER THEN YOU CAN HEAR SOUND COMING FROM FRONT EAR SPEAKER TOO. FRONT EAR SPEAKER VOLUME IS NOT LOUD OBVIOUSLY BECAUSE ITS NOT AN SPEAKER BUT WHEN YOU PLAY SONG THE SURROUND EFFECT YOU WILL GET FROM COMBINATION OF BOTH SPEAKERS ITS JUST AMAZING.
You must have custom recovery installed such as TWRP OR CWM in order to flash the zip file.
THIS WILL WORK ONLY WITH ALL TOUCHWIZ ROMS THAT I'VE TESTED SO FAR IT WILL NOT WORK I REPEAT IT WILL NOT WORK WITH AOSP MIUI OR ANY OTHER ROMS.
FOR USA ALL MODELS FILES BELOW THE FILE NAME SHOWS TMO TMOBILE BUT IT WORKS FOR ALL USA MODELS OF NOTE 4 I'VE TESTED ON N910P/V/T/W8.
FOR EXYNOS SM-N910C/H GO TO LINK BELOW
https://forum.xda-developers.com/note-4/general/dual-speaker-mod-exynos-n910c-testers-t3839238
FOR N910F/G OR IF YOU HAVE NOTE EDGE GO TO LINK BELOW.
https://forum.xda-developers.com/showpost.php?p=57102722&postcount=2
THIS IS FOR USA SNAPDRAGON N910T/P/V/W8 MODELS BELOW.
1 WARNING THIS IS VERY LOUD STEREO SURROUND IT CAN DAMAGE YOUR SPEAKERS IF YOU RAISE VOLUME TO MAX.
https://mega.nz/#!6VdCAbTQ!PZ_HwIJsPt4LOTKhFhTa3XZfRVAuNM54hg_6EXysRjo
2 THIS IS MEDIUM VOLUME STEREO SORROUND BUT HIGHER THEN STOCK.
BTW THIS 1 IS MY FAVORITE
https://mega.nz/#!DVMGBJwK!Rjy2QbmgNixPOXrC0yPnCL-JFiO2fYt33qSeV2_BTuE
3 IF YOU LIKE STOCK VOLUME AND STILL WANT STEREO SURROUND VOLUME THIS IS BEST FOR YOU.
https://mega.nz/#!3BsQHaQQ!P_2kDVGnZmLyWC9qXLd8WI-kKNJLYm24pZhubGuGt4Y
CREDITS GOES TO @sshafranko
Orignal post link below for many more samsung models supported.
https://forum.xda-developers.com/note-edge/development/mod-sm-915t-surround-sound-t2955648
I AM LOVING MY NOTE 4 AGAIN IN 2018 AFTER FLASHING THIS MOD IT'S JUST AMAZING.
INSTALL POWERAMP MUSIC PLAYER AND FEEL THE POWER OF HEADPHONES .
HIT ME THUMBS UP IF YOU LIKE IT:good::good::good:

@ Trex888 Thanks a lot tried the medium volume for N910F and works great, but curiously how safe is the front speaker with using this mod for a long term use?

@mcfotty: Even Chinese smartphone makers test their phone with loudspeaker ON for hours. I am sure the Note4's earpiece speaker also went through rigorous testing, and some folks just use the loudspeaker all the time.
My device is like 3 years old now, getting slower and slower every day. At least there is something I can still get out of it. So, why not?
(Nvm just read N910C does not work. RIP.)

mcfotty said:
@ Trex888 Thanks a lot tried the medium volume for N910F and works great, but curiously how safe is the front speaker with using this mod for a long term use?
Click to expand...
Click to collapse
I am using this mod from over 3 months and no issues so far with speakers.
Just dont raise volume to max for too long it could possibly distorted the speaker sound.

Appreciate all your kind and timely responds and wondering if you can make this mod for n9100.....thanks

mcfotty said:
Appreciate all your kind and timely responds and wondering if you can make this mod for n9100.....thanks
Click to expand...
Click to collapse
i am not the 1 who create this mod you should contact to @sshafranko so he can create this mod for SM-N9100.

N910c not working

khaledreno said:
N910c not working
Click to expand...
Click to collapse
Which rom are you using ? And which android version ?

khaledreno said:
N910c not working
Click to expand...
Click to collapse
Same here... 910c not working on nemesis refined rom android 6.01... Sad...
Sent from my [device_name] using XDA-Developers Legacy app

I still loving my N910C! It is probably the best phone that I have ever purchased.

Not working on n910c erobot rom

Thanks for sharing this! On my 910T (Magma UX 1.0), using the loud version, it definitely works, but the rear speaker still over-powers the earpiece so it seems like it's not really working. Is this how it is supposed to be, or should the two volumes be more balanced? Thanks!

lesterf said:
Thanks for sharing this! On my 910T (Magma UX 1.0), using the loud version, it definitely works, but the rear speaker still over-powers the earpiece so it seems like it's not really working. Is this how it is supposed to be, or should the two volumes be more balanced? Thanks!
Click to expand...
Click to collapse
It's because front earpiece is not an speaker. the volume will be low because if it's loud it can damaged easily

Just replace the mixer path file (in the zip file) manually from N910F version on the N9100(dual sim Chn) and working great. Thanks for sharing the mod

Just tweak it for myself
Hi, can somebody tell me how to edin the power of back speaker (make it quiet) to "feel more stereo". What do I have to edit ? I see in etc two different mixer_paths. Thanks.

quletadik23 said:
Not working on n910c erobot rom
Click to expand...
Click to collapse
Dual Speaker Mod has been fixed and working 100% now on N910C.
https://forum.xda-developers.com/note-4/general/dual-speaker-mod-exynos-n910c-testers-t3839238

I've flashed the Medium and Regular zips via TWRP on my N910T (tried both), but only the ear piece speaker is firing. There is no sound out the of main speakers. I'm running the OvrDrive ROM and stock kernel.
Any ideas?
Thanks. :good:

iunlock said:
I've flashed the Medium and Regular zips via TWRP on my N910T (tried both), but only the ear piece speaker is firing. There is no sound out the of main speakers. I'm running the OvrDrive ROM and stock kernel.
Any ideas?
Thanks. :good:
Click to expand...
Click to collapse
If you have viper4android or dolby then it may be the issue
On stock working perfectly

Trex888 said:
If you have viper4android or dolby then it may be the issue
On stock working perfectly
Click to expand...
Click to collapse
Hmm ... yea I don't have either and I've even re-Odin'ed the stock firmware again just to be sure....
This is so strange. If all else fails on the software end of things then it's 'gotta' be hardware related... I'll report back after replacing the speaker to see if in fact it is a hardware issue....

Is there any mod for aosp pie rom?

Dual Speaker Mod (Exynos) SM-N910C

Hello xda members
I create a small beautiful mod for our beloved Note4 Exynos
It will give you dualspeaker effect just like new s9+
I tested on my device and working flawlessly but need more testers for such as mic for phone calls and 3rd party apps such as whatsapp voice messages etc.
ONLY FOR EXYNOS N910C MARSHMALLOW 6.0.1
NOT TESTED ON OTHER VARIANTS
Make sure copy your original "default_gain.conf" file somewhere safe just in case.
Instructions
Open any root browser
Go to system/etc and replace "default_gain.conf" with the 1 i made.
Make sure Set permission to (rwrr)
Reboot
Download link
https://mega.nz/#!aQNTmKiS!Ic1BNqLtbcBOwM0aQrwwlmX-ukiE9qo1Q6sz-jlVuVc
Let me know if any mic bug so i can fix it

Hello.
Mic for phones calls - good work [emoji2].
WhatsApp voice calls - not work [emoji853].

zulu666 said:
Hello.
Mic for phones calls - good work [emoji2].
WhatsApp voice calls - not work [emoji853].
Click to expand...
Click to collapse
Which rom you are using ?
I am on stock rooted and whatsapp voice works perfect

Sorry my mistake. The problem was on the WhatsApp beta version. Original version works well. Stock + root.

zulu666 said:
Sorry my mistake. The problem was on the WhatsApp beta version. Original version works well. Stock + root.
Click to expand...
Click to collapse
Thanks for reporting back:good:

working fine here, thx, no mic problem till now in voice recorder and telegram voice message, my question is will it hurt the earpiece speaker after a while with listening to music loudly?

KINGTATu said:
working fine here, thx, no mic problem till now in voice recorder and telegram voice message, my question is will it hurt the earpiece speaker after a while with listening to music loudly?
Click to expand...
Click to collapse
I am not sure if it hurt earpiece but dont listen very load for long period .
anyways my note 4 is old almost 2.5 years so personally i dont care.at least i am getting something cool out of it
Thanks for feedback.

This mod has definitely given a new life to my Note 4, thanks for your hard work.
However, when I plug in the headphone, some sound is still coming from the earpiece, which is a bit annoying, hoping it would be fixed.

tingyus168 said:
This mod has definitely given a new life to my Note 4, thanks for your hard work.
However, when I plug in the headphone, some sound is still coming from the earpiece, which is a bit annoying, hoping it would be fixed.
Click to expand...
Click to collapse
Yes there is sound bleeding from earpiece while headphones connected
Try unplug and plug it back the headphones see if bleeding is gone
I cant test anymore because recently i lost my N910C and now using note 5

Trex888 said:
Yes there is sound bleeding from earpiece while headphones connected
Try unplug and plug it back the headphones see if bleeding is gone
I cant test anymore because recently i lost my N910C and now using note 5
Click to expand...
Click to collapse
I've plugged and unplugged headphone multiple times with and without audio being played, but the problem still persists

My speakerphone won't work, what should i do?