Case Mate Tough Case for S7 edge not too ugly - Samsung Galaxy S7 Edge Accessories

The case is a little fatter than normal TPU cases. The outer part has a grippy texture and is hard plastic and the inner part is TPU. The Buttons work well and cutouts are good.
Overall it was the least ugliest case for the S7 edge i could find. I got it for 25€.
Here are some Pirctures.

Not bad. A little thicker than I like, but after a few drinks... I'd take her home ?
Sent from my SM-G935V using Tapatalk

Is the inner tpu part more hard or soft? Is it like a rubbery silicone?

I prefer the more subtle style myself, I also like transparency so the look of the phone can be maintained as much as possible. Here is my Spigen Crystal Clear with a Zagg HD screen protector. I suggest you get a protector on that screen as quickly as possible.

20degrees said:
Is the inner tpu part more hard or soft? Is it like a rubbery silicone?
Click to expand...
Click to collapse
It's a quite hard TPU

Beefheart said:
I prefer the more subtle style myself, I also like transparency so the look of the phone can be maintained as much as possible. Here is my Spigen Crystal Clear with a Zagg HD screen protector. I suggest you get a protector on that screen as quickly as possible.
Click to expand...
Click to collapse
The problem with these transparent cases are that they look so cheap.

Fair enough, opinions and all that. Personally, I think the one I have looks far nicer than a thick rubbery black effort which covers up the look and feel of the phone. But again, that's an opinion.

Beefheart said:
Fair enough, opinions and all that. Personally, I think the one I have looks far nicer than a thick rubbery black effort which covers up the look and feel of the phone. But again, that's an opinion.
Click to expand...
Click to collapse
Thats why i wrote not too ugly. I think the best solution is two piece of good glass , one grippy glass on the back and one one the front.

pnda said:
The problem with these transparent cases are that they look so cheap.
Click to expand...
Click to collapse
They only look cheap the morning after.

I got one as I prefer to be protected but I bought the kickstand version.
Sent from my SM-G935F using Tapatalk

pnda said:
The problem with these transparent cases are that they look so cheap.
Click to expand...
Click to collapse
Does the zagg protector make the screen less sensitive?
Sent from my SM-G935T using Tapatalk

Related

[Q] Thinnest Case?

Hi,
I am looking for a case that adds minimal bulk to the device. I would prefer something with a soft-touch finish, but not necessarily silicone.
So far, I have looked at the Seidio Surface, the SGP Ultra Silke, and the Rearth Ringke.
Does anyone know from experience which of these cases is thinnest?
Also, has anyone found other cases that will retain the slimness of the phone?
Thanks.
I dont know from experience but from reading these forums the incipio feather case maybe be the slimmest. Its hard case that snaps on but doesnt cover the top or bottom of the phone. I do got the Rearth Ringke which is awesome. The fit is great.
Sent from my Nexus S 4G using XDA App
hugo87 said:
I dont know from experience but from reading these forums the incipio feather case maybe be the slimmest. Its hard case that snaps on but doesnt cover the top or bottom of the phone. I do got the Rearth Ringke which is awesome. The fit is great.
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
Thanks for the reply. Is the Rearth Ringke relatively slim as well?
Also interested in a slim case.
Its really not that bad. The fit is great and the texture it has is a nice touch. It has enough grip to keep it from slipping but slippery enough to keep lent and fingerprints off.
Sent from my Nexus S 4G using XDA App
^That's good to know.
Does anyone else have any suggestions for slim cases?
you could get these if you would consider a skin http://www.adreama.com/products/mobile-phone-skins/samsung/nexus-s
they're pretty damn thin, give good grip, protects the outside of your phone from scratches, and you get two so you can pick which color you prefer
I wish case mate would make a barely there case. There seems to be a huge demand for it.
incipio case quite slim, soft, and sexy.. the only drawback is it's quite fragile. my friend bought it awhile ago, he had SOD (sleep of death) many times using netarchy kernel and he had to remove the case to remove the battery. after a few remove, the case start to get loose and finally the case gave up and broke..
hoponpop said:
you could get these if you would consider a skin http://www.adreama.com/products/mobile-phone-skins/samsung/nexus-s
they're pretty damn thin, give good grip, protects the outside of your phone from scratches, and you get two so you can pick which color you prefer
Click to expand...
Click to collapse
This seems interesting. I have found several cases identical to this on eBay for as little as $3 (like this andthis).
The material seems different than other TPU cases, and is just what I am looking for. Anyone else have a case similar to this (TPU, but with matte-finish rubberized rear)?
kvs678 said:
This seems interesting. I have found several cases identical to this on eBay for as little as $3 (like this andthis).
The material seems different than other TPU cases, and is just what I am looking for. Anyone else have a case similar to this (TPU, but with matte-finish rubberized rear)?
Click to expand...
Click to collapse
that second one looks just like the black one that you get in the two pack I posted. I actually think that the black one looks really bad with a black phone, but that's just my opinion.
I have the incipio feather case (black) and love it. Soft touch, great grip, and best of all no fingerprints. Not a tacky rubberized feel that sticks to everything (lint, hair). There is a little space at the top and bottom that isn't covered (bottom for port access) but it looks great. very slim. I bought the standard black case that best but had available on launch day and the crappy rubbery screen protector. Couldn't stand either one and dug out my g1 sleeve cover.
Bought the incipio because I hate the slick back of the phone. Been using it ever since.
I would disagree that it is fragile. I take it off and put it back on at least once a week and haven't had any loosening or breakage (after several months of use). Thing is still rock solid and fits perfectly snug.
hopefully this is helpful.
edit: although it is very thin and adds very little bulk, it is noticeable. With the case on, my phone no longer fits in my g1 sleeve and this makes me kind-of a sad panda.
Sent from my Nexus S using XDA Premium App
hoponpop said:
that second one looks just like the black one that you get in the two pack I posted. I actually think that the black one looks really bad with a black phone, but that's just my opinion.
Click to expand...
Click to collapse
How is your overall experience with the two-pack case that you posted? Does it add too much bulk to the device, or attract dust/lint?
eramsey said:
I have the incipio feather case (black) and love it. Soft touch, great grip, and best of all no fingerprints. Not a tacky rubberized feel that sticks to everything (lint, hair). There is a little space at the top and bottom that isn't covered (bottom for port access) but it looks great. very slim. I bought the standard black case that best but had available on launch day and the crappy rubbery screen protector. Couldn't stand either one and dug out my g1 sleeve cover.
Bought the incipio because I hate the slick back of the phone. Been using it ever since.
I would disagree that it is fragile. I take it off and put it back on at least once a week and haven't had any loosening or breakage (after several months of use). Thing is still rock solid and fits perfectly snug.
hopefully this is helpful.
edit: although it is very thin and adds very little bulk, it is noticeable. With the case on, my phone no longer fits in my g1 sleeve and this makes me kind-of a sad panda.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
Thanks so much for the detailed review. I appreciate the input.
The Feather seems to be a promising alternative to the other cases, mainly because I love the soft touch finish.
kvs678 said:
How is your overall experience with the two-pack case that you posted? Does it add too much bulk to the device, or attract dust/lint?
Click to expand...
Click to collapse
I actually think that the phone fits better in my hand with the case on. i'm not worried that i'm going to snap it in half on accident and it's only the tiniest bit bulkier than it normally would be.
I seem to notice little hairs and stuff accumulating right where the case stops, but it's easy enough to either wipe them off without removing the case or to just pull the case off and clean around the edges. overall, I think it's a great case. I added some before and after pictures so you could see how little bulk there is.
I also have the Incipio Feather Case and agree with discussion above. Actually have 2 for 2 phones.
Black is matte finish. Teal is not, but its not a hard, shiny plastic feel. I really like it, questioned buying but so tired of black (their other colors are
very bright, way too much for a mother of 3).
I was looking for the thinnest case possible and feel this is it.
The top and bottom is open so won't protect there, but has the corners.
The thing I love the most is the grip, felt the phone was too slick and just
waiting to drop. This solved that. I do not feel it is fragile, don't take off
that much, but have no problems using fingernail. It is tight, but that is good.
Would highly recommend. And if shopping on Ebay, there are some for $20
shipped. It states Nexus S (not specific for 4g, even on the box when you
receive it), but if it is Incipio, not knock off, it works.
sgp case is very good

Searching for the thinnest case for Verizon G2.

Ok so I absolutely cannot stand the glossy back on this phone. I mean, it looks nice... if you never touch it. But man the smudges... its just terrible. That being said I am looking for a case, but only to get rid of that. I usually don't get cases because they add bulk, that is why I am in search of a super thin one. So, case suggestions for Verizon G2, hit me!
paperllanterns said:
Ok so I absolutely cannot stand the glossy back on this phone. I mean, it looks nice... if you never touch it. But man the smudges... its just terrible. That being said I am looking for a case, but only to get rid of that. I usually don't get cases because they add bulk, that is why I am in search of a super thin one. So, case suggestions for Verizon G2, hit me!
Click to expand...
Click to collapse
Incipio feather- got it for the exact same reason, adds hardly no bulk and a nice soft touch finish. I love mine.
dneilan1 said:
Incipio feather- got it for the exact same reason, adds hardly no bulk and a nice soft touch finish. I love mine.
Click to expand...
Click to collapse
Looks awesome, I will have to try it out
The Incipio Feather Shine is also great. I have been using it for almost a week now and have had multiple people tell me that they didn't even know a case was on the phone!
I like the diztronic case. It's probably not as thin as the feather, but it's really close plus it covers the top and the bottom. Fits really nice.
http://www.ebay.com/itm/0-4mm-Rubbe...t=US_Cell_Phone_PDA_Cases&hash=item3cd843ae0d
This one looks pretty thin, I just purchased the black will report back once I get it.
sil0 said:
http://www.ebay.com/itm/0-4mm-Rubbe...t=US_Cell_Phone_PDA_Cases&hash=item3cd843ae0d
This one looks pretty thin, I just purchased the black will report back once I get it.
Click to expand...
Click to collapse
Just ordered the white.
Can always sand the back cover (there's a thread somewhere) or get a skin if you don't want a case.
I have both the incipio feather and diztronic and the incipio is the better of the 2 imo but the diztronic will offer alittle more protection.
bL33d said:
I have both the incipio feather and diztronic and the incipio is the better of the 2 imo but the diztronic will offer alittle more protection.
Click to expand...
Click to collapse
I just got the Incipio Feather Shine and it's too slippery for me. I had a Feather before and I liked the tackiness. I can't stand the Feather Shine. What's the best case that's tacky like the Feather and is slim and just barely covers the phone.
I just got my matte black Diztronic. I can't imagine anything being thinner than it. It's pretty grippy, too.
Sent from my VS980 4G using Tapatalk
Poetic sand or poetic softouch. Makes the incision feather look like an otterbox. The sand is the perfect grip adder
Sent from my LG-LS980 using Tapatalk
Is there one that fits the international version (or Sprint/T-mobile version). Only see ones for AT&T on amazon?
bimmerd00d said:
Poetic sand or poetic softouch. Makes the incision feather look like an otterbox. The sand is the perfect grip adder
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
mcjonesy said:
I just got my matte black Diztronic. I can't imagine anything being thinner than it. It's pretty grippy, too.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
I had a matte black TPU case for my HTC Inspire back in the day that I really liked, it was only like $5 too! I could never remember what brand it was though. I know it wasn't Diztronic (they have their logo on all their stuff right?), but when I searched for TPU cases for my GNex they looked closest to it.
Anyways yeah the TPU case I had was pretty thin, I think I am gonna try the Feather though and see how that goes. :fingers-crossed:
maximus20895 said:
I like the diztronic case. It's probably not as thin as the feather, but it's really close plus it covers the top and the bottom. Fits really nice.
Click to expand...
Click to collapse
I have one, too. It covers the back and sides quite well, and easily slides in/out of my front pocket.
___________________
Sent from my LG G2 (D801) using XDA-Developers Premium 4
The Diztronic cases are TPU cases and like all TPU cases, adds a decent lip around the edges of the screen = nasty.
The Incipio Feather is the best slim case around. I have a feather case on my wife's iPhone, my old Gnex, and new G2. It is made up of top notch material that won't flake off the coating and is very durable.
I honestly can't recommend any other slim cases. And don't go for the Feather Shine or whatever... just the plain jane Feather. I got the Blue one from Verizon. They are like $18 on Amazon. Walmart also carries them. Pretty popular cases.
MarkAtHome said:
I have one, too. It covers the back and sides quite well, and easily slides in/out of my front pocket.
___________________
Sent from my LG G2 (D801) using XDA-Developers Premium 4
Click to expand...
Click to collapse
Also have the Matte Black for the VS980. I usually hate cases but this one is pretty thin and has a slight lip on the front to help keep the screen from resting on anything. I love the grip and the way the case feels and like most says it easily slides in/out of pockets.
bimmerd00d said:
Poetic sand or poetic softouch. Makes the incision feather look like an otterbox. The sand is the perfect grip adder
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
They look exactly the same as the Feather (but cheaper).
http://www.amazon.com/Poetic-Palette-case-Sand-Black/dp/B00ED2DVZ2
Poetic also uses cheaper chinese plastics compared to Incipio, so you get what you pay for.
Also that case is not specific to the Verizon model. It appears to a be overall generic LG G2 case because of the additional unused microphone hole found only on the AT&T. Also the cutouts won't match the Verizon's smaller buttons.
player911 said:
They look exactly the same as the Feather (but cheaper).
http://www.amazon.com/Poetic-Palette-case-Sand-Black/dp/B00ED2DVZ2
Poetic also uses cheaper chinese plastics compared to Incipio, so you get what you pay for.
Also that case is not specific to the Verizon model. It appears to a be overall generic LG G2 case because of the additional unused microphone hole found only on the AT&T. Also the cutouts won't match the Verizon's smaller buttons.
Click to expand...
Click to collapse
I use the Slim Armor Case. It fits beautifully ☺
Sent from my LG-D801 using XDA Premium 4 mobile app
Here's another
Sent from my LG-D801 using XDA Premium 4 mobile app

M8 Clear Cases to Showcase

Hey everyone, so I know there's a few thread about cases which I've read through. But what I'm looking for is any info on good quality clear cases.
The main factor I like is the appearance. It's just about time a company really put an effort into the looks as well as the performance of a current Gen smartphone.
So my question is what clear cases are out there that some of you possibly already have or have seen online? I've scoured amazon and other sites and found some good ones, but still haven't found the "one".
Currently I own the otterbox commuter (too big, covers whole phone), the supcase hybrid with clear back which is what I currently have on. And I placed an order yesterday for the exact prism case with the clear back. Though I now realize the prism and supcase are probably the same exact case....
My issue with the supcase hybrid clear back is the scratches that accumulate so easily on the back. Most of the cases out there are simply cheap. Some are very good for the money but I'm looking for long lasting durable quality.
I have an eye on the supcase unicorn beetle hybrid as well but my turn off is the back being frosted to the point that you can't see the detail or shine of the m8. At least that's what I've seen in pictures.
I'll use an all clear or some kind of hybrid bumper clear back case. I also saw the griffin reveal case, but I can't find any good pics. And from the description it looks like it's the same material as the supcase bumper hybrid. I was hoping the griffins clear back would be a solid hard scratch resistant material.
I've also seen the case mate barely there and some others. So if any of you have any other clear or partly clear cases please post some feedback on how you like them and pics would be great too!
Sent from my HTC6525LVW using Tapatalk
Uag has a transparent case now. Check it out the case provides a lot of protection and isn't as bulky as an otter box
Sent from my HTC One_M8 using xda app-developers app
Is it the maverick?
Sent from my HTC6525LVW using Tapatalk
Jmack3d said:
Is it the maverick?
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Yes it is.
Just a word of caution with clear cases, they have a tendency to collect lint and crap which is easily noticeable. I had the cruzerlite Bugdroid Circuit Case clear and ended up selling it to a buddy. The pocket lint and crap collects under it and bugged the crap out of me. I cancelled my clear UAG order and changed it to black in fear of the same problem.
Now this might not bother some, but bothered me enough to share.
I have the Spigen® [STRONG-FLEX] Capsule Clear Ultra Fit (TPU), it's pretty nice:
http://www.amazon.com/gp/product/B0...tiveASIN=B00IF5B218&linkCode=shr&tag=cshus-20
Makes me feel like I can toss my phone on the table or something and it will be OK. Doesn't seem to scratch or yellow. Makes handling the phone more fun since I don't have to be so delicate and it seems durable while showing off the nice aluminum case.
http://www.spigen.com/brands/htc/htc-one-m8/htc-one-m8-case-ultra-fit-capsule.html
ch0use said:
I have the Spigen® [STRONG-FLEX] Capsule Clear Ultra Fit (TPU), it's pretty nice:
http://www.amazon.com/gp/product/B0...tiveASIN=B00IF5B218&linkCode=shr&tag=cshus-20
Makes me feel like I can toss my phone on the table or something and it will be OK. Doesn't seem to scratch or yellow. Makes handling the phone more fun since I don't have to be so delicate and it seems durable while showing off the nice aluminum case.
http://www.spigen.com/brands/htc/htc-one-m8/htc-one-m8-case-ultra-fit-capsule.html
Click to expand...
Click to collapse
I also have this case. Some people have said the edges look yellow. Um no. If the lighting in the room has some yellow in it then it will look like that on the thick sides. This is a very nice case with covered buttons for volume and power. And exact cut outs for everything including back mic, flash and camera lenses. Vs flash and one of the camera lenses being one cut out for both.
Raech said:
I also have this case. Some people have said the edges look yellow. Um no. If the lighting in the room has some yellow in it then it will look like that on the thick sides. This is a very nice case with covered buttons for volume and power. And exact cut outs for everything including back mic, flash and camera lenses. Vs flash and one of the camera lenses being one cut out for both.
Click to expand...
Click to collapse
I too have the case but pictures using flash don't look right. Almost like the case diffuses the flash light so it's not direct out as well at the object you are photographing. I also have a qi receiver under my case in order to have wireless charging so now I have a black tpu case coming today to hide the qi receiver.
otariq said:
Uag has a transparent case now. Check it out the case provides a lot of protection and isn't as bulky as an otter box
Sent from my HTC One_M8 using xda app-developers app
Click to expand...
Click to collapse
Do you have any pics of the UAG clear on the m8?
Sent from my HTC6525LVW using Tapatalk
I was in UAG site and there is no such case. I am also looking for the best clear case out there, TPU or hard plastic (I prefer hard plastic, to be honest). Is spigen the one?
Badelhas said:
I was in UAG site and there is no such case. I am also looking for the best clear case out there, TPU or hard plastic (I prefer hard plastic, to be honest). Is spigen the one?
Click to expand...
Click to collapse
http://www.amazon.com/gp/product/B0...pf_rd_t=101&pf_rd_p=1741301142&pf_rd_i=507846
jhun80 said:
http://www.amazon.com/gp/product/B0...pf_rd_t=101&pf_rd_p=1741301142&pf_rd_i=507846
Click to expand...
Click to collapse
That case is not transparent, I believe. It's just the photo. Check the other photos from UAG website. http://www.urbanarmorgear.com/products/maverick-new-htc-one-m8
jhun80 said:
http://www.amazon.com/gp/product/B0...pf_rd_t=101&pf_rd_p=1741301142&pf_rd_i=507846
Click to expand...
Click to collapse
I think you you kind of right because part of the case is transparent.
Check here: UAG MAVERICK's Case Designed for THE NEW HTC One …: http://youtu.be/mMghI5t-HCE
ch0use said:
I have the Spigen® [STRONG-FLEX] Capsule Clear Ultra Fit (TPU), it's pretty nice:
http://www.amazon.com/gp/product/B0...tiveASIN=B00IF5B218&linkCode=shr&tag=cshus-20
Makes me feel like I can toss my phone on the table or something and it will be OK. Doesn't seem to scratch or yellow. Makes handling the phone more fun since I don't have to be so delicate and it seems durable while showing off the nice aluminum case.
http://www.spigen.com/brands/htc/htc-one-m8/htc-one-m8-case-ultra-fit-capsule.html
Click to expand...
Click to collapse
I have this case as well. I like how the power and volume buttons are covered. I can see where some say the case looks yellow, but you really have to take a close look to even notice.
All in all I am happy with the case. My one complaint is a sharp line that extents all around the back of the phone. I think it would have been better to have made this smooth as it would be more comfortable in hand.
Dropped my phone on the bleachers at the game, found my volume up button dented in, non-functional.
Pried it out, unbent it a bit and got it back in, works.
Bummed the case let that happen though. And agree about the sharp edge.
I've been using the Exact Prism Series Slim-Fit Transparent Case for HTC One M8 Clear/Black, and have been very happy with it: http://www.amazon.com/gp/product/B00JAR24SU
ch0use said:
I have the Spigen® [STRONG-FLEX] Capsule Clear Ultra Fit (TPU), it's pretty nice:
http://www.amazon.com/gp/product/B0...tiveASIN=B00IF5B218&linkCode=shr&tag=cshus-20
Makes me feel like I can toss my phone on the table or something and it will be OK. Doesn't seem to scratch or yellow. Makes handling the phone more fun since I don't have to be so delicate and it seems durable while showing off the nice aluminum case.
http://www.spigen.com/brands/htc/htc-one-m8/htc-one-m8-case-ultra-fit-capsule.html
Click to expand...
Click to collapse
Unfortunately, my clear spigen case has a slight yellowing to it. This was present in purchase, so beware. Otherwise, it is a very good protector that allows the m8's looks to shine.
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Great thread!
I also want a case that can still show the great design this phone has, while providing some protection, and I believe many of you will as well. I also ordered a Glass Screen Protector from Aliexpress to go along.
This are my findings:
Spigen Case Ultra Fit Capsule (TPU)
http://www.spigen.com/htc-one-m8-case-ultra-fit-capsule.html
Case-Mate BARELY THERE (Hard Plastic)
http://www.case-mate.com/htc-one-m8-cases/case-mate-htc-one-m8-barely-there-case.asp
Case-Mate NAKED TOUGH (Hard Plastic + TPU bumper)
http://www.case-mate.com/htc-one-m8-cases/case-mate-htc-one-m8-naked-tough-case.asp#
Griffin Reveal (Hard Plastic +TPU)
http://store.griffintechnology.com/reveal-for-htc-one-m8
Exact Prism Series Slim-Fit Transparent Case (TPU)
http://www.amazon.com/Exact-Prism-Series-Slim-Fit-Transparent/dp/B00JAR24SU
KAYSCASE Slim Hard Shell Cover (TPU)
http://www.amazon.com/gp/product/B0...=UTF8&psc=1&tag=androidcentral00-20&m1k=vb_ac
Do you have any of these? Which one would you recommend and why? It´s very difficult to make a decision based on the videos out there, which are normaly only unpackaging...
Cheers
http://www.pure-gear.com/media/cata...319eda06f020e43594a9c230972d/b/l/black_43.png
I had this pure gear slim for a bit. It's a great case. I opted for the UAG maverick because it has a bigger edge lip.
http://www.pure-gear.com/shop-by-device/htc/slim-shell-case-for-the-new-htc-one-m8.html
Sent from my HTC6525LVW using XDA Premium 4 mobile app
I ordered 3 different type of clear cases, I´m waiting for them to arrive:
Baseus Soft TPU Ultrathin Transparent Case Cover Shield
http://pages.ebay.com/link/?nav=item...013422&alt=web
Clear Hybrid PC Cover With Black TPU Frame
http://pages.ebay.com/link/?nav=item...998769&alt=web
NEW ULTRA THIN CRYSTAL CLEAR HARD CASE
http://pages.ebay.com/link/?nav=item...441622&alt=web
Cheers
Badelhas said:
Great thread!
I also want a case that can still show the great design this phone has, while providing some protection, and I believe many of you will as well. I also ordered a Glass Screen Protector from Aliexpress to go along.
This are my findings:
Spigen Case Ultra Fit Capsule (TPU)
http://www.spigen.com/htc-one-m8-case-ultra-fit-capsule.html
Case-Mate BARELY THERE (Hard Plastic)
http://www.case-mate.com/htc-one-m8-cases/case-mate-htc-one-m8-barely-there-case.asp
Case-Mate NAKED TOUGH (Hard Plastic + TPU bumper)
http://www.case-mate.com/htc-one-m8-cases/case-mate-htc-one-m8-naked-tough-case.asp#
Griffin Reveal (Hard Plastic +TPU)
http://store.griffintechnology.com/reveal-for-htc-one-m8
Exact Prism Series Slim-Fit Transparent Case (TPU)
http://www.amazon.com/Exact-Prism-Series-Slim-Fit-Transparent/dp/B00JAR24SU
KAYSCASE Slim Hard Shell Cover (TPU)
http://www.amazon.com/gp/product/B0...=UTF8&psc=1&tag=androidcentral00-20&m1k=vb_ac
Do you have any of these? Which one would you recommend and why? It´s very difficult to make a decision based on the videos out there, which are normaly only unpackaging...
Cheers
Click to expand...
Click to collapse
I have the Kaycase and love it. Great price and quality.
Sent from my 831C using Tapatalk

Silly question, but I have to ask

I want to protect the screen from cracking on an accidental fall and I've had numerous recommendations all different from one another. I've done some research but again I've found conflicting results.
I've heard/read that a hard case is the best bet to protect the screen from breaking on a fall (seems logical), but also (logically) it will increase the thickness and width of the phone. I want to avoid that as best I can as the phone is huge already for me.
I've heard/read that a tempered glass screen protector will offer some form of protection against cracks and breaks of the glass if the phone does fall. Of course not as much as a solid hard case, but better than no cover. I've been told by one person that it will give the phone screen about 50% more strength, someone told me that it will double the strength of the screen, another told me it will do nothing.
I also read stories of having your phone 'treated' (I dont know what that means and I cant find any more info about this) whereby the glass has its strength increased to avoid breaks and cracks.
What is my best option to keep the phone slim and give the glass some kind of protection, without the use of a case? Does anyone have any kind of advice to offer?
A tempered glass protector will help some. Its hard to say how much though. It cant be quantified because screen breaks arent always from direct contact between screen and surface. Best protection would be protector AND case.
I'm getting a ringke slim case in crystal. Its pretty much the thinnest hard case. Maybe it will be slim enough for you.
rootSU said:
A tempered glass protector will help some. Its hard to say how much though. It cant be quantified because screen breaks arent always from direct contact between screen and surface. Best protection would be protector AND case.
I'm getting a ringke slim case in crystal. Its pretty much the thinnest hard case. Maybe it will be slim enough for you.
Click to expand...
Click to collapse
Thanks for the reply; I'll look into the case you mentioned, thank you!
Yes, I thought the tempered glass protector would help but assumed it wouldn't help much/be measurable due to the different ways a phone could break.
Buy a tempered glass screen protector, i bough the one from Yootech on amazon.
Like what others have said, a tempered glass protector is what you're looking for. They're much better than plastic screen protectors.
Tempered offers better protection, feels better in the hand. The only con is that it may not cover all the edges as tempered glass is flat whereas plastic screen protectors can be curved.
http://forum.xda-developers.com/nexus-6/accessories/tempered-glass-screen-protectors-t2922645 is a thread where you can read up on whats available.
Some of the big names are: Jelly Comb, Ghostek, and some others.
I'm not sure how protective a "skin" is but it could be somewhat handy, the big names would be dbrand and slickwraps.
zephiK said:
I'm not sure how protective a "skin" is but it could be somewhat handy, the big names would be dbrand and slickwraps.
Click to expand...
Click to collapse
I think the dbrand seem a bit thicker. It saved my nexus 5 from a few scratches on a pavement drop. The slick will too, but perhaps not as much. Anything more than a scratch though, it's not rally going to do anything.
rootSU said:
I think the dbrand seem a bit thicker. It saved my nexus 5 from a few scratches on a pavement drop. The slick will too, but perhaps not as much. Anything more than a scratch though, it's not rally going to do anything.
Click to expand...
Click to collapse
My first dbrand was for the nexus 4. The nexus 4 had a glass back and I was annoyed during winter time, the back of the phone was super cold because of the glass.
I purchased a skin for the n6 for the back to prevent fingerprints. I think a awesome setup would be. Tempered glass, dbrand, slickwraps side skins.
Wish dbrand offered skins for the sides. But yeah dbrand should protect minor accidents like scratches
Sent from my Nexus 6 using Tapatalk
zephiK said:
My first dbrand was for the nexus 4. The nexus 4 had a glass back and I was annoyed during winter time, the back of the phone was super cold because of the glass.
I purchased a skin for the n6 for the back to prevent fingerprints. I think a awesome setup would be. Tempered glass, dbrand, slickwraps side skins.
Wish dbrand offered skins for the sides. But yeah dbrand should protect minor accidents like scratches
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I haven't got a glass yet and im holding off as I like the feel of the 6 naked. I've ordered a Ringke slim in Crystal which should arrive today or tomorrow... and a carbon fibre back and sides from slickwraps. Not sure if I will like the case but it was cheap so its no loss...
I use a Unicorn Beetle case on my phone. A little bit big but you'll get used to it soon. I've dropped it about 4 times and it should have cracked about 3 times. But not a crack
Well the Slim case arrived. Actually the videos and photos dont actually do justice to how slim it is. Its really slim. BUT, it does creak a little and it scratches even using a lint cloth, which of course you need to use because if you get anything stuck between the phone and the case, you can see it a mile off.
rootSU said:
Well the Slim case arrived. Actually the videos and photos dont actually do justice to how slim it is. Its really slim. BUT, it does creak a little and it scratches even using a lint cloth, which of course you need to use because if you get anything stuck between the phone and the case, you can see it a mile off.
Click to expand...
Click to collapse
Yep same here when I got mines. The top left creaked a bit. It's a pain in order to remove the case. I personally don't really like their slim case, the Galaxy Nexus slim case was perfect though. I go for the Ringke fusion.
Sent from my Nexus 6 using Tapatalk
zephiK said:
Yep same here when I got mines. The top left creaked a bit. It's a pain in order to remove the case. I personally don't really like their slim case, the Galaxy Nexus slim case was perfect though. I go for the Ringke fusion.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I dont like any cases at all. I'm a naturist when it comes to phones, but it was £6 from Amazon so I thought "why not". It is hard to remove, but I was prepared for that after watching the video reviews in the accessories forum.
I can't say I'll keep it on, but I'll see how long I can last
rootSU said:
I dont like any cases at all. I'm a naturist when it comes to phones, but it was £6 from Amazon so I thought "why not". It is hard to remove, but I was prepared for that after watching the video reviews in the accessories forum.
I can't say I'll keep it on, but I'll see how long I can last
Click to expand...
Click to collapse
I felt like I was going to break the phone with how tough it was. I eventually got it off but made my thumb get injured slightly. Not fun. I do love the fusion though. So beautiful
Sent from my Nexus 6 using Tapatalk
zephiK said:
I felt like I was going to break the phone with how tough it was. I eventually got it off but made my thumb get injured slightly. Not fun. I do love the fusion though. So beautiful
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Yeah very nice. I'd prefer clear all round to show off skin sides. ..and a bit big for me.
Ive never been one for cases but I did runrun an urban armor gear on my s3 for a few weeks. Was massive and looked like a portable toilet haha
Thank you to all for your clarification and suggestions in this thread; I hope that others with similar questions will find this a good source as I have for a quick, simple set of answers.
At this stage I'll likely end up with a temp glass cover for one phone and a flip case for the other (partner's phone, as they've recently decided they want).
rootSU said:
Yeah very nice. I'd prefer clear all round to show off skin sides. ..and a bit big for me.
Ive never been one for cases but I did runrun an urban armor gear on my s3 for a few weeks. Was massive and looked like a portable toilet haha
Click to expand...
Click to collapse
I would have done that too, I have a Crystal but the carbon fiber looked weird with the blue sides so I had a smoke black to hide the trim piece.

How to get better grip on S7 edge?

As you know Galaxy S7 edge is very slippery phone. I would like to get good grip with this phone but I don't want to use some thick cases. Anyone know how I can improve grip of this phone? I was wondering if I should buy dbrand skin but I don't know if it will give me good grip if i put this skin only in rear side of the phone. The problem with this skin is that if i want to get skin to side part of the smartphone I need to put skin also in front side but i don't want that.
Use one of those slim rubber cases, like the one from Ringke.
I just bought one of these. Helps massively.
http://www.spigen.co.uk/cell-phone/samsung/galaxy-s7-edge/galaxy-s7-edge-case-thin-fit.html
For better grip you can use a skin like dbrand or slickwraps.
Use a screen protector for the back, like the armorsuit body protector, helps with the grip.
Sent from my SM-G935F using Tapatalk
Mubble said:
I just bought one of these. Helps massively.
http://www.spigen.co.uk/cell-phone/samsung/galaxy-s7-edge/galaxy-s7-edge-case-thin-fit.html
Click to expand...
Click to collapse
Agreed - great case, adds very little bulk but improves grip a lot. It almost feels like it's part of the phone.
gcogger said:
Agreed - great case, adds very little bulk but improves grip a lot. It almost feels like it's part of the phone.
Click to expand...
Click to collapse
No i don't like cases like this Spiegen's beause they cover the aluminum on the phone on the front and back .
peterbu said:
No i don't like cases like this Spiegen's beause they cover the aluminum on the phone on the front and back .
Click to expand...
Click to collapse
The aluminium is the slippery bit
@peterbu
3MK Arc 3D Grip.
3MK it's polish brand screen's protector.
Im using a Armorsuit Carbon Fiber Skin on my phone make the phone way less slippery
Sent from my SM-G935U using Tapatalk

Categories

Resources