OK chaps, after the reports of the Home Button being plastic (I am pretty sure it is) I asked ScreenKnight, one of the suppliers on amazon.co.uk if they would produce a screen protector for it along with some to protect the very scratch prone heart rate sensor/flash and the outer part of the camera lens. Well they kindly obliged...
I have not received mine yet as am currently working away until the weekend but will post a review once I have them in hand and applied. However I cannot see it hurting to add that little bit more protection.
I did test the fingerprint sensor with a screen protector over it (prior to my request) and it worked fine but you may need to re-train a finger or two.
http://www.amazon.co.uk/dp/B01CXHMUVO
Hope this helps a few!
Camera protectors sound good in theory, after all who wants the cover for the camera lens to end up scratched or cracked? However, they almost always end up in a degraded image quality. I would be interested in protecting the home button though, providing the protection doesn't interfere with print reading. Look forward to the review.
I did request that there is a hole for the lens, so only protects the outer part, I would never use a protector that covered the whole leans part.... but will report back once home at the weekend..
Also, from tests out there the camera is very scratch resistant anyway
I wonder how much money would the screen protectors cost, let alone the skill you would need to put these on perfect. I know I could do it, just worried about the rest who have a hard time putting on a screen protector!
I think putting these on will be very easy tbh, just line up one end, no room for bubbles etc. Let's hope I am not eating my own words soon lol
Should get mine tomorrow so we will see
I suppose the protector on the home button would be useful for raising it a little when a screen protector is applied to the screen.
Sent from my SM-G935F using Tapatalk
Mine has arrived will be fitting tonight so I'll post back with review later
chippyuk said:
OK chaps, after the reports of the Home Button being plastic (I am pretty sure it is) I asked ScreenKnight, one of the suppliers on amazon.co.uk if they would produce a screen protector for it along with some to protect the very scratch prone heart rate sensor/flash and the outer part of the camera lens. Well they kindly obliged...
I have not received mine yet as am currently working away until the weekend but will post a review once I have them in hand and applied. However I cannot see it hurting to add that little bit more protection.
I did test the fingerprint sensor with a screen protector over it (prior to my request) and it worked fine but you may need to re-train a finger or two.
http://www.amazon.co.uk/dp/B01CXHMUVO
Hope this helps a few!
Click to expand...
Click to collapse
No luck with home button covered phone doesn't even recognise a finger is on the sensor had to remove it
I'd have to question, is a protector really worth it for home button and camera!?
Chris_c81 said:
I'd have to question, is a protector really worth it for home button and camera!?
Click to expand...
Click to collapse
proberly not but i bought my phone on the samsung upgrade finance deal which means in a year if i keep this pristine and scratch free i can upgrade to the samsung s8 and they will pay off the reaminder on my finance. want to keep it as mark free as possible so they cant find a reason to refuse to upgrade it
Strangeland16 said:
No luck with home button covered phone doesn't even recognise a finger is on the sensor had to remove it
Click to expand...
Click to collapse
Bugger! It worked with a protector I had here... Did you try to add a finger with it on or just to access the phone?
Chris_c81 said:
I'd have to question, is a protector really worth it for home button and camera!?
Click to expand...
Click to collapse
Looking at my S6E button (not a single mark anywhere else on the phone) and some of the comments about the S7E button on here then I would say yes but it is all relative right!
chippyuk said:
Bugger! It worked with a protector I had here... Did you try to add a finger with it on or just to access the phone?
Click to expand...
Click to collapse
No tried to add a finger and it just sits there as doesn't detect a finger is on the scanner. Maybe you will have better luck let me know please ?
Will do! Guess it is down to the material they use! Apologies to have wasted your money!
chippyuk said:
Will do! Guess it is down to the material they use! Apologies to have wasted your money!
Click to expand...
Click to collapse
no its fine wasnt a lot of money and i would have ordered it if i had seen it anyway. not blaming you in the slightest mate. if you have better luck i may try again as may have done something wrong will wait for your attempt first though
i can confirme it is horrible:
putting it on is easy, quality is horrible and most for the home button it is way too thick and fingerprint is unusable. removing it also leaves residue, worth a try for few bucks
Don't buy this.. I bought it and scratched the heart rate monitor trying to put it on. I have a ultimate shields camera covers. It came with the full body screen protector and it's brilliant. The camera protector has a hole for the sensor area so no loss in image quality.
---------- Post added at 04:26 AM ---------- Previous post was at 04:23 AM ----------
The installation came with it said it was a wet application.. It that the case?
ziggazee said:
Don't buy this.. I bought it and scratched the heart rate monitor trying to put it on. I have a ultimate shields camera covers. It came with the full body screen protector and it's brilliant. The camera protector has a hole for the sensor area so no loss in image quality.
---------- Post added at 04:26 AM ---------- Previous post was at 04:23 AM ----------
The installation came with it said it was a wet application.. It that the case?
Click to expand...
Click to collapse
My HRM got scracthed on day 1. I didn't realize it was cheap plastic so when brushing it off with one of my DSLR lens brushes it got scratched. I was surprised to say the least, but i never use it, nor do I even remember it being there so it doesn't matter to me.
Did anybody of you try on home button some liquid protector like wowfixit for example?
Inviato dal mio SM-G935F utilizzando Tapatalk
Related
Hello folks,
As most of you reading I am a happy Topaz user,
But I find it sad, that I almost do not dare to use the device without stylus
Whenever I touch the phone, it leaves a dirty mark...
And I cannot live with that, So I always want to clean it afterwards
I mean... even with a screen protector installed, it gets dirty too quick,
And I recon I cannot walk around with a bunch of cleaning tools either
So, what's your opinion on this? or do you have a good solution?
Do you care that the screen is dirty, or not? please tell me
Thanks already
- Jeutie
is ok , you can always change screen protector .
jeutie said:
... I almost do not dare to use the device without stylus
Whenever I touch the phone, it leaves a dirty mark...
Click to expand...
Click to collapse
I use an antiglare screen protector I got from Brando (http://shop.brando.com.hk/bw-pda-screen-protector-htc-touch-diamond-2-_p03225c1035d039.html). You lose something in brightness but it is very impervious to dirt and fingerprints.
There is also an hot debate on matte finishing battery cover. I simply painted the original cover using matte spray acrylic paint (http://forum.xda-developers.com/showpost.php?p=3950791&postcount=67) Of course you need a bit of manual dexterity and a brave heart...
I just leave it dirty
I thought about another screen protector aswell... but I think I'll fail again xD
(screen protector was dusty already when I putted it on, But I'll try again.)
Thanks for the information
But Would you recommend the normal screen protector or the Ultra Clear one?
Hi
Yep feel the same, hated touching it when I first got it as any touch leaves a fingerprint, if you try and wipe it away you make it worse. The aluminium surround really shows up finger prints and then smudges and so does the screen even with screen protector on. Even ear prints are clearly visible!
This isn't unique to the Topaz though, the state I've seen some iPhones in
So I just live with the fact it only looks shiny and new after a quick clean with some cleaner and a microfibre cloth, for just a short period of time.
It would help if the back was matt black or rubberised, but it isn't. I really don't understand the people that design these things as surely they must put them through some form of user testing, and I can't believe out of an even tiny group of testers the comment 'finger print magnet' didn't arise.
Regards
Phil
I do have the matt finish ;-) bought it way overpriced on ebay...
But the screen protector didn't help so I was looking for something better
and indeed, the aluminium is even worse xD
jeutie said:
But Would you recommend the normal screen protector or the Ultra Clear one?
Click to expand...
Click to collapse
The Ultra Clear looks and feels as the original screen and as other screen protectors, that is glass like. Therefore, dirt and fingerprints remain very visible.
On the other hand the antiglare has a kind of very small granularity over it. Dirt and fingerprints do not stick to it and fingers, nails and stylus glide very nicely over it. On the other hand, it is not completely transparent, expecially under direct sunlight.
But so, for the fingerprint issue, the normal one should be better, then the ultra clear one, Thanks
I'll order one on Monday, And I'll get someone less clumsy to put it on ^^
PhilipL said:
'finger print magnet'
Click to expand...
Click to collapse
That's a PERFECT DEFINITION! My opinion is that being a "touch" device, we have no great chances to solve the problem on what concerns the screen..Other question is the backVery sexy on picture but fingerprint hungry and sometimes slippy!! Waiting for a mat cover at decent price.BTW congrats to ouram57 for his guts! But is the painting layer resisting,especially at the corners?
sualc said:
BTW congrats to ouram57 for his guts!
Click to expand...
Click to collapse
Well, after all I could always buy a new cover (http://www.expansys.com/d.aspx?i=179389).
sualc said:
But is the painting layer resisting,especially at the corners?
Click to expand...
Click to collapse
The painting is quite resistant but of course scratches accumulate as they did on the shiny original case (but they are a bit less visible). The good news is that on too many scratches paint can be applied again...
You're right! If it's been successfully done once, why not repeat it if needed..
Hoping that none of us will ever need it,http://www.expansys.com/d.aspx?i=179389 is one of the most expensive pieces of plastic on earth
sualc said:
You're right! If it's been successfully done once, why not repeat it if needed..
Hoping that none of us will ever need it,http://www.expansys.com/d.aspx?i=179389 is one of the most expensive pieces of plastic on earth
Click to expand...
Click to collapse
...especially as its not for the TD2, check it out, it has 2 holes at the top and a diamond back!?!
TD1 maybe ???
That "thing" with two holes is also on sale at HTC's:http://www.htcaccessorystore.com/uk/p_htc_item.aspx?i=179389 as "original" cover for D2Very affordable as usual.. I get mad if I think it's about 10% of the phone's price. My ideal back cover would be mat gummy black, just like the Kaiser (a.k.a TytnII).. hope someone is going to think about it!
Aright... I have applied the screen protector...
That's great! no more fingerprints on the screen
Together with the backcover and installation of some cabs... my device is totally like I want it
Thanks folks!
Hi all,
Fitted my Flex HD protector (front and rear, pics below)... Rear fits great height-wise, but a bit short width-wise, not bad in general though... Quite good at applying these protectors and I got it without a single bubble
Front one though was a different story... It was my first ever wet-protector install and I'm not entirely sure about it. The fit is GREAT! Just not sure how well my actual application has gone...
Anyone installed this specific protector on this phone and able to offer any advice on whether the bubbles shown will work themselves out over a few days as it says they should? Doesn't seem to be any dust below, just bubbles
Thanks!
They'll go away. It took mine two days to disappear. the first day I saw a few and tried to move them out and by the second night I couldn't see any bubbles.
you can always take it off and re-install. The pray that comes with it does not work as well as a small bowl of water with a drop of dischwashing soap. Make sure your fingers are good and wet and they with some practice you should be able to get much less bubbles right away. I am a perfectionist and it took me 4 applications to get it perfect. I had zero bubbles as soon as I was done and it took about 1 day for the excess moisture to dry for a perfect application. No hair, dust or bubbles. Surpirsingingly, I really like how this SP feels on the phone, and I always have used tempered glass.
The good thing about a wet application is that you get second chances, unlike glass (at least i my experience)
good luck
Mine looked the same as your's OP, by the end of the night most of the small bubbles were gone. Really hoping the rest of them work themselves out over the next few days. Most comments I've read say they do, so I'm optimistic as I am a perfectionist as well. Can't stand the sight of bubbles or blemishes in my screen protector.
DrkGhst87 said:
Mine looked the same as your's OP…
Click to expand...
Click to collapse
I see the orange peel effect and i have ordered this screen protector does the effect go away over time? is it a matter of stretching as much as possible during application with the card?
Thanks all
It seems that after about 12 hours it is looking a lot better, not quite perfect yet though
I also see now there are a couple of bits of dust (I made the mistake of putting it back down on the sheet after taking it off initially to clean the screen again)... Surprisingly though the bits with the dust aren't the worst bubbles, in fact they're not very visible at all
Will give it a few more days then maybe post some more pics for people to see what it is like
It took mine about a week for all the bubbles to work themselves out, but now that the did I can't even tell I have a screen protector on my phone. Really happy with the front protector!
I'm gonna have to redo it as it has dust from when I put it down
But yes the bubbles in general surprisingly are sorting themselves out
Anyone think their screen looks slightly yellowish hue after installing this? I don't recall how mine looked before so I'm really hoping this is so and it's not my actual screen. If it's my screen then I will be exchanging if because it's quite irritating. And it's perfectly white when I hold the screen at an angle instead of dead on.
Sent from my SAMSUNG-SM-G925A using Tapatalk
This is smooth to touch,right?
beda_boy said:
This is smooth to touch,right?
Click to expand...
Click to collapse
Yes
Sent from my SAMSUNG-SM-G925A using Tapatalk
---------- Post added at 12:16 PM ---------- Previous post was at 11:49 AM ----------
So anyone notice the screen looking yellow after installing this?
I would simply take mine off and determine that way but then I would have no protection afterwords. So any help would be greatly appreciated.
Sent from my SAMSUNG-SM-G925A using Tapatalk
does that screen protector cover the curves???
oneandroidnut said:
does that screen protector cover the curves???
Click to expand...
Click to collapse
Yes. Covers the entire face of the phone.
Sent from my SAMSUNG-SM-G925A using Tapatalk
Pure+ said:
Yes. Covers the entire face of the phone.
Sent from my SAMSUNG-SM-G925A using Tapatalk
Click to expand...
Click to collapse
interesting i may have to grab one if i get an edge
Kur0ya said:
I see the orange peel effect and i have ordered this screen protector does the effect go away over time? is it a matter of stretching as much as possible during application with the card?
Click to expand...
Click to collapse
After 2 days, all blemishes and bubbles are gone. I've had several people say they had no idea there was even a screen protector on until I told them. It feels like glass and doesn't have that rubbery feel to it like how some other "wet" application screen protectors feel. I also don't have any discoloration due to the screen protector either. I can honestly say I love how it looks.
I was very skeptical at first since this was my first "wet" application screen protector. I've always used the one and done "dry" application ones. The application process was very nerve racking with all that "solution" on my phone, and trust me I was with everyone else with how my phone looked initially. But after letting it settle for a few days, I can say I'm glad I went with this screen protector that wraps from edge to edge versus going with one that only covered the top of the screen. I highly recommend it to anyone on the fence :good:
Kur0ya said:
I see the orange peel effect and i have ordered this screen protector does the effect go away over time? is it a matter of stretching as much as possible during application with the card?
Click to expand...
Click to collapse
YMMV, some people here claim it goes away but I frankly don't believe them. The orange peel effect is there and in full force even after a week. There's even a bubble that will not go away even though there is no dust underneath. I'm returning this one ASAP and I recommend against anyone buying it.
DrkGhst87 said:
After 2 days, all blemishes and bubbles are gone. I've had several people say they had no idea there was even a screen protector on until I told them. It feels like glass and doesn't have that rubbery feel to it like how some other "wet" application screen protectors feel. I also don't have any discoloration due to the screen protector either. I can honestly say I love how it looks.
Click to expand...
Click to collapse
is it possible you can take multiple front and back photos please?
ThugEsquire said:
YMMV, some people here claim it goes away but I frankly don't believe them. The orange peel effect is there and in full force even after a week. There's even a bubble that will not go away even though there is no dust underneath. I'm returning this one ASAP and I recommend against anyone buying it.
Click to expand...
Click to collapse
yeah.. I like the bubbles happen when lack of liquid and the card isnt used properly and will not come out.
where did you purchase? thoughts on skinomi full protection incl sides?
azibux1 said:
Hi all,
Fitted my Flex HD protector (front and rear, pics below)... Rear fits great height-wise, but a bit short width-wise, not bad in general though... Quite good at applying these protectors and I got it without a single bubble
Front one though was a different story... It was my first ever wet-protector install and I'm not entirely sure about it. The fit is GREAT! Just not sure how well my actual application has gone...
Anyone installed this specific protector on this phone and able to offer any advice on whether the bubbles shown will work themselves out over a few days as it says they should? Doesn't seem to be any dust below, just bubbles
Thanks!
Click to expand...
Click to collapse
I don't think this is brilliant. Those "bubbles" don't look like they'll disappear. Looks like a defective screen protector. Did these ever go away? Wonder if others had the same problem and it is a result of a faulty batch
Kur0ya said:
is it possible you can take multiple front and back photos please?
Click to expand...
Click to collapse
Here's my phone with the FlexHD on after 3 days
And I thought I did a good job. You sir are a master at installing liquid install protectors. If I were to place my phone next to yours it would look like ****, although I did install mine in the car, outside of best buy, on my lap, on a rainy day with no light, because I didn't dare put the phone in my phone or any where else for the drive home.
Oh well, good thing it came with 2 protectors. Can always try again.
If you're in the UK and desperate to get your screen protected until something better comes along, I can personally recommend this product.
http://pages.ebay.com/link/?nav=item.view&id=161994219563&alt=web
It is of the wet apply variety however what I like about this is it has very low friction (rubbery feel) under finger like some other I've experienced in the past. Seller is UK based. I collected from Argos the day after I ordered it.
I've had Zagg in the past and considering how much they charge this is somewhat comparable in terms of quality. For £4 it will more than suffice until (read if) a decent tempered one hits the shelves.
Chris_c81 said:
If you're in the UK and desperate to get your screen protected until something better comes along, I can personally recommend this product.
http://pages.ebay.com/link/?nav=item.view&id=161994219563&alt=web
It is of the wet apply variety however what I like about this is it has very low friction (rubbery feel) under finger like some other I've experienced in the past. Seller is UK based. I collected from Argos the day after I ordered it.
I've had Zagg in the past and considering how much they charge this is somewhat comparable in terms of quality. For £4 it will more than suffice until (read if) a decent tempered one hits the shelves.
Click to expand...
Click to collapse
I ordered one of these yesterday which should be coming today. Nice to know its decent enough. I couldnt find a Matte protector in the UK so will use this until one comes out.
s17nj said:
I ordered one of these yesterday which should be coming today. Nice to know its decent enough. I couldnt find a Matte protector in the UK so will use this until one comes out.
Click to expand...
Click to collapse
Thanks just received a set of front and back in the post good to know there decent was worried. How did the install go ?. Can you use a case OK without it riding up ?
---------- Post added at 08:22 PM ---------- Previous post was at 08:00 PM ----------
Strangeland16 said:
Thanks just received a set of front and back in the post good to know there decent was worried. How did the install go ?. Can you use a case OK without it riding up ?
Click to expand...
Click to collapse
just installed the front and rear these are perrfect i ordered 2 sets and now have a spare which is awesome sides seem to stick well but will wait a few hours and try in my case if they work well ill recommend this to anyone will update later. so far very happy
got one its to big around corners
ChazyChaz said:
got one its to big around corners
Click to expand...
Click to collapse
Really!? Mine fit perfectly. Honestly can't complain for the money.
Strangeland16 said:
Thanks just received a set of front and back in the post good to know there decent was worried. How did the install go ?. Can you use a case OK without it riding up ?
---------- Post added at 08:22 PM ---------- Previous post was at 08:00 PM ----------
just installed the front and rear these are perrfect i ordered 2 sets and now have a spare which is awesome sides seem to stick well but will wait a few hours and try in my case if they work well ill recommend this to anyone will update later. so far very happy
Click to expand...
Click to collapse
FYI I'm using the Samsung Clear View case absolutely fine with this screen protector. Obviously it's wise to let it fully cure (dry) before putting in the case.
yes i have for s6 and was ok
best its from this guys , http://www.ultimateshield.co.uk/samsung-galaxy-s7-edge-screen-protector
cover full phone without this ugly cutting
Chris_c81 said:
FYI I'm using the Samsung Clear View case absolutely fine with this screen protector. Obviously it's wise to let it fully cure (dry) before putting in the case.
Click to expand...
Click to collapse
Yeah thanks just tried it and no problems . These are excellent projectors. Will stick with this unless a tempered glass that actually fits comes out . So easy to install and looks good still
ChazyChaz said:
yes i have for s6 and was ok
best its from this guys , http://www.ultimateshield.co.uk/samsung-galaxy-s7-edge-screen-protector
cover full phone without this ugly cutting
Click to expand...
Click to collapse
I can live with it for £3.99 personally. One you linked is out of stock.
Chris_c81 said:
I can live with it for £3.99 personally. One you linked is out of stock.
Click to expand...
Click to collapse
Contacted them few weeks ago , today will be in stock.
I haven't installed mine yet, as received it yesterday. Chris_c81 did you have to wait until the flat surface is dry before sticking the edges down?
s17nj said:
I haven't installed mine yet, as received it yesterday. Chris_c81 did you have to wait until the flat surface is dry before sticking the edges down?
Click to expand...
Click to collapse
Perseverance to be honest. I found that the main screen piece held in place quickest. I squeegeed out excess liquid via the edges. Then started to work on the edges. Took a few attempts but eventually the edges held good enough in place. For several hours after while watching TV I used a combination of thumbs and fingers to smooth out any noticeable liquid. I also used a rubber pencil eraser to smooth out. Kept working on the edges too. I'm a bit anal about things like this so I kept at it until the whole screen surface was satisfactory to me lol. Next day it had cured fully.
Just found my first issue with these . Put in my pocket while I biked to work took out of pocket when at work and it had lifted. And also it's scratched like mad I know it's meant to protect the screen underneath but it looks awful. Also if it scratches in my pocket what's it going to do if it meets anything sharp. Think I'll be looking for something else. Gutted
Chris_c81 said:
Perseverance to be honest. I found that the main screen piece held in place quickest. I squeegeed out excess liquid via the edges. Then started to work on the edges. Took a few attempts but eventually the edges held good enough in place. For several hours after while watching TV I used a combination of thumbs and fingers to smooth out any noticeable liquid. I also used a rubber pencil eraser to smooth out. Kept working on the edges too. I'm a bit anal about things like this so I kept at it until the whole screen surface was satisfactory to me lol. Next day it had cured fully.
Click to expand...
Click to collapse
Thanks Chris, will try this tonight and leave it to cure over night.
Strangeland16 said:
Just found my first issue with these . Put in my pocket while I biked to work took out of pocket when at work and it had lifted. And also it's scratched like mad I know it's meant to protect the screen underneath but it looks awful. Also if it scratches in my pocket what's it going to do if it meets anything sharp. Think I'll be looking for something else. Gutted
Click to expand...
Click to collapse
Must've been chaffing on the phone quite a bit for it to lift! I can run my finger quite hard against the edge and no lift. I can see what you mean about the other issue though. I'm using mine with the Clear View case from Samsung so hadn't noticed. Ran my finger nail down the screen protector and it does seem to leave a little mark. It's protecting the screen so I can't complain too much plus you only notice the marks when angled in the right light.
As I say, for £4 - which is basically nothing - and quick UK delivery, for me I'm treating this as a cheap and quick method of protecting the screen until something better comes along.
Chris_c81 said:
Must've been chaffing on the phone quite a bit for it to lift! I can run my finger quite hard against the edge and no lift. I can see what you mean about the other issue though. I'm using mine with the Clear View case from Samsung so hadn't noticed. Ran my finger nail down the screen protector and it does seem to leave a little mark. It's protecting the screen so I can't complain too much plus you only notice the marks when angled in the right light.
As I say, for £4 - which is basically nothing - and quick UK delivery, for me I'm treating this as a cheap and quick method of protecting the screen until something better comes along.
Click to expand...
Click to collapse
Yeah I'm just really fussy with these things hate marks but like you say it's cheap and protecting screen. I have a spare so will put that on and hope something better comes out fast
Strangeland16 said:
Yeah I'm just really fussy with these things hate marks but like you say it's cheap and protecting screen. I have a spare so will put that on and hope something better comes out fast
Click to expand...
Click to collapse
Day one I NEEDED protection hence this purchase! Couldn't bare the thought of a hairline scratch on the screen within first few days!!
Chris_c81 said:
Day one I NEEDED protection hence this purchase! Couldn't bare the thought of a hairline scratch on the screen within first few days!!
Click to expand...
Click to collapse
Yeah definitely please keep me informed if you find anything else
already in stock if someone intersted in my opinion best i found.
---------- Post added at 03:47 PM ---------- Previous post was at 03:45 PM ----------
Chris_c81 said:
I can live with it for £3.99 personally. One you linked is out of stock.
Click to expand...
Click to collapse
already in stock ordered will see if its same good like s6 edge.
ChazyChaz said:
already in stock if someone intersted in my opinion best i found.
---------- Post added at 03:47 PM ---------- Previous post was at 03:45 PM ----------
already in stock ordered will see if its same good like s6 edge.
Click to expand...
Click to collapse
Ordered one too. Only £6 for screen only.
I need some help. I wan to buy a screen protector or a tempered glass cover for my Moto Z play. It already has a few small scratches over its screen and I would like to prevent more. So please give me links to some which buy online in India. I did found some but the reviews made me doubtful, particularly the fact that some part of screen is left uncovered. so please help me.
SK47007 said:
I need some help. I wan to buy a screen protector or a tempered glass cover for my Moto Z play. It already has a few small scratches over its screen and I would like to prevent more. So please give me links to some which buy online in India. I did found some but the reviews made me doubtful, particularly the fact that some part of screen is left uncovered. so please help me.
Click to expand...
Click to collapse
The gap is necessary.
I think all 3 Zs can use the same one, a theory of mine, not yet confirmed.
Look at the other forums.
I too am ready to buy.
as i compared tempered glasses on ebay for Z and Z Play, the difference is upper part - they both have flash and front camera but switched between models
Crap I am looking at selling my Moto g4 plus and buying this phone. Are you guys saying that this phone doesn't like tempered glass screen protectors and doesn't have a bumper case that is compatible with the Moto mods?
yayo685 said:
Crap I am looking at selling my Moto g4 plus and buying this phone. Are you guys saying that this phone doesn't like tempered glass screen protectors and doesn't have a bumper case that is compatible with the Moto mods?
Click to expand...
Click to collapse
Incipio and Verizon (in the US) do a bumper case you can use with Moto Mods.
I use tempered glass, just that the edges are beveled and it will show a slight 'edge'. Same for other glass protectors.
emailrob said:
Incipio and Verizon (in the US) do a bumper case you can use with Moto Mods.
I use tempered glass, just that the edges are beveled and it will show a slight 'edge'. Same for other glass protectors.
Click to expand...
Click to collapse
Would you mind linking the tempered glass screen protector please? Based off what I am reading in the other threads it looks like the screen protectors take away a lot of the screen responsiveness.
yayo685 said:
Would you mind linking the tempered glass screen protector please? Based off what I am reading in the other threads it looks like the screen protectors take away a lot of the screen responsiveness.
Click to expand...
Click to collapse
I picked up a pair of Omoton brand tempered glass for $8 on Amazon. They are "meh" at best. First one I missed a spot of dust mid screen, tried to pull to reapply, and cracked the corner. Not totally unusual. Second one went on clean, but had 3 big bubbles - worked their way out after 3 days. Because of the 2.5d taper of the device screen, there's an unattached "ring" around the edge of the screen (maybe 2-3 mm wide) where the protector doesn't fully attach. Screen responsiveness is mildly diminished - rarely causes any serious issue, but missed touches/swipes do happen.
Tempted to pull and run naked, but it's tolerable for now and I like the added protection, since I don't have insurance.
yayo685 said:
Would you mind linking the tempered glass screen protector please? Based off what I am reading in the other threads it looks like the screen protectors take away a lot of the screen responsiveness.
Click to expand...
Click to collapse
Same one as the poster above
https://www.amazon.com/gp/product/B01LY9TCL2/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Two pack. Screen responsiveness seems fine, and I'm happy that the screen is safe.
try this one, it covers almost all (made for z force but fits moto z play too)
http://www.ebay.com/itm/172316562388
i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
drvoje said:
try this one, it covers almost all (made for z force but fits moto z play too)
http://www.ebay.com/itm/172316562388
i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
Click to expand...
Click to collapse
Please post pictures when you get the 2nd one
Does anybody know if there is a tempered glass privacy shield for Z Play? Like the ones that prevent people from seeing the screen when they look at it in an angle.
Sparin is fabulous
https://www.amazon.com/gp/product/B01FYSGZM4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
drvoje said:
[...] i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
Click to expand...
Click to collapse
I had to log in just to say thanks. I've been looking everywhere for a protector that covers the rear glass as well as the front. Thanks a bunch <3 :highfive:
aviwdoowks said:
Sparin is fabulous
https://www.amazon.com/gp/product/B01FYSGZM4/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
I just got my Sparin screen protector on my MZP, and I couldn't be more satisfied. It's a perfectly molded glass screen protector, and comes with a top notch installation kit and tools. Patience and applying in as dust free place as you can find are key.
I didn't even have bubbles to work out after applying, and the edges stared to stick after just a few times of pushing on them.
dplakta said:
I had to log in just to say thanks. I've been looking everywhere for a protector that covers the rear glass as well as the front. Thanks a bunch <3 :highfive:
Click to expand...
Click to collapse
Sherman tank!
---------- Post added at 05:14 AM ---------- Previous post was at 05:12 AM ----------
brinox said:
I just got my Sparin screen protector on my MZP, and I couldn't be more satisfied. It's a perfectly molded glass screen protector, and comes with a top notch installation kit and tools. Patience and applying in as dust free place as you can find are key.
I didn't even have bubbles to work out after applying, and the edges stared to stick after just a few times of pushing on them.
Click to expand...
Click to collapse
I was able to pry mine up, wipe off and put back on. Lol
Update l rinsed sticky side with distilled water, any caught under glass goes away in a week or so
Thanks to those of you who suggested the sparin screen protectors.
Got mine a couple days ago, and installed today. Definitely a slightly smaller coverage area than the Omoton I replaced. The sparin does give me a halo of unattached edge still, but it's smaller than the omoton, and most importantly almost nonexistent on the bottom edge - so hopefully won't hook on my pocket and peel up like the omoton.
Nicely packaged, good install kit. Install went fine - 2 good sized bubbles toward one edge initially, but they both worked themselves out after a couple hours.
Screen sensitivity is a little better than with the omoton protector, but still slightly diminished from naked.
Overall, would buy again.
drvoje said:
try this one, it covers almost all (made for z force but fits moto z play too)
http://www.ebay.com/itm/172316562388
i know it is not topic but i also ordered this:
https://www.aliexpress.com/item/For...32781307755.html?spm=2114.13010608.0.0.5RlNaJ
Click to expand...
Click to collapse
razorsbk said:
Please post pictures when you get the 2nd one
Click to expand...
Click to collapse
I have just receive the second one.
Good:
- no halo effect.
Bad:
-Does not fit properly, the black part at the bottom is to big and it covers the screen
- Camrea and flash holes doesnt fit either, I had to sacrifice a tiny part of the flash in order to have the camera visible (not a big deal, flash works with no problem and pictures look good)
Here is a picture using a game as reference, on the right part, you can se I have 1228 coins, but in fact I have 12280 so... well a part is lost.
As you can see I tried to place the glass as closest I could to the bottom and you can also see the camera and flash holes, that part its really making me nervous because I really need that to be centered (despite it works great). I have a problem with that, maybe I´m crazy :laugh:
Well.... for 3-4 euros I paid its not that bad but this glass its not for Z play. I dont know If someone tried on a normal Z.
oh! about the "feeling" its not as soft as naked or using the omoton but its OK (Im just an average user maybe someone find it worst than OK).
I wanted to try the sparin one but here on Spain I cant find it, only Omoton.
Sorry if i made any grammar mistake (I´m still learning! )
EDIT: Added game screenshot so you can see how much screen is lost, not much to be honest and now the navbar looks smaller! (you can see 100% the buttons and its fully operative, maybe this should go the "good" part )
Thats something I really miss from gravity box, making smaller the navbar, the centered clock and the traffic monitor. Im 100% stock right now.
@drvoje : Did you tried the first screen protector you mentioned? how does it look?
Iktor said:
I have just receive the second one.
Good:
- no halo effect.
Bad:
-Does not fit properly, the black part at the bottom is to big and it covers the screen
- Camrea and flash holes doesnt fit either, I had to sacrifice a tiny part of the flash in order to have the camera visible (not a big deal, flash works with no problem and pictures look good)
Here is a picture using a game as reference, on the right part, you can se I have 1228 coins, but in fact I have 12280 so... well a part is lost.
As you can see I tried to place the glass as closest I could to the bottom and you can also see the camera and flash holes, that part its really making me nervous because I really need that to be centered (despite it works great). I have a problem with that, maybe I´m crazy :laugh:
Well.... for 3-4 euros I paid its not that bad but this glass its not for Z play. I dont know If someone tried on a normal Z.
oh! about the "feeling" its not as soft as naked or using the omoton but its OK (Im just an average user maybe someone find it worst than OK).
I wanted to try the sparin one but here on Spain I cant find it, only Omoton.
Sorry if i made any grammar mistake (I´m still learning! )
EDIT: Added game screenshot so you can see how much screen is lost, not much to be honest and now the navbar looks smaller! (you can see 100% the buttons and its fully operative, maybe this should go the "good" part )
Thats something I really miss from gravity box, making smaller the navbar, the centered clock and the traffic monitor. Im 100% stock right now.
@drvoje : Did you tried the first screen protector you mentioned? how does it look?
Click to expand...
Click to collapse
Like like that screen protector was made for the Moto Z/force, which have different bezel sizes on top and bottom than the Moto Z Play.
sorry for late reply, at that time that was best protector because it covers most of the screen and its not that expensive... i said that is made for z forse but it can fit at z play (ofc they are not same phones and its not 100% perfect but still better option then most of protectors - which have whole mic/speaker side opened)
now for camera glass protector, first of all i want to say when you install it it stays flat, you will never even notice its there
but when i installed it, dust was bellow and i did not do it right on first try, so now when i take pictures with flash turned on they become white...
now i ordered 2 more, and im expecting them to come soon, so i will install it again and i will let you know
there is no point to send you pictures because you will never know its there on camera
UPDATE for screen protector: I oredered this one, seems like best option:
http://www.ebay.com/itm/282249920491?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
aviwdoowks said:
Sherman tank!
---------- Post added at 05:14 AM ---------- Previous post was at 05:12 AM ----------
I was able to pry mine up, wipe off and put back on. Lol
Update l rinsed sticky side with distilled water, any caught under glass goes away in a week or so
Click to expand...
Click to collapse
In nearly a month a cloud ☁ is still there but getting smaller each day.
saw these guys on facebook (sponsored post) - looks interesting but i cant find any reviews of their products on youtube etc - no influences or anything!
https://youtu.be/5ZaD7FmWQS4
https://www.bare-cases.com/pages/pane-samsung
https://www.bare-cases.com/collections/screen-protectors/products/bare-pane-for-galaxy-note-8
they say its compatible with most cases as long as the lip isnt too high
anyone have any experience with them or any tempered glass they'd recommend (especially one thats compatible with the ringke fusion)
Well, looks promissing!
Looks exactly like this one.
https://www.amazon.com/gp/aw/d/B077GSJ55T?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
I'm convinced there is only 2 or 3 manufacturers and they just put the glass in different packaging.
Sent from my SM-N950U using Tapatalk
dschachm said:
Looks exactly like this one.
https://www.amazon.com/gp/aw/d/B077GSJ55T?psc=1&ref=yo_pop_mb_yo_pop_mb_pd_t2
I'm convinced there is only 2 or 3 manufacturers and they just put the glass in different packaging.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
LOL
Ugh, I just want a FULL screen protector with FULL ADHESIVE! Why is that too much to freaking ask for?!!!
Jammol said:
Ugh, I just want a FULL screen protector with FULL ADHESIVE! Why is that too much to freaking ask for?!!!
Click to expand...
Click to collapse
I don't think we'll ever seen one for the Note 8.
Sent from my SM-N950U using Tapatalk
Zaggs tempered glass revision 2 has been on the money. I've placed this thing on twice. Once when I got it and, the second time, I removed it from my old unit after a screen burn-in replacement, and place it onto my new unit. No air bubbles and the glass feels high quality, comparable to Whitestone sans the complex installation. It sits on the screen only slightly curving to the edge, and it does sit flush without interfering with the edge tab if I choose to use it. It is quite expensive ($50) but imho, it's quite worth it after successful installation. Highly recommend it!
princeasi said:
Zaggs tempered glass revision 2 has been on the money. I've placed this thing on twice. Once when I got it and, the second time, I removed it from my old unit after a screen burn-in replacement, and place it onto my new unit. No air bubbles and the glass feels high quality, comparable to Whitestone sans the complex installation. It sits on the screen only slightly curving to the edge, and it does sit flush without interfering with the edge tab if I choose to use it. It is quite expensive ($50) but imho, it's quite worth it after successful installation. Highly recommend it!
Click to expand...
Click to collapse
While I agree with you that it goes on nicely you didn't mention that since it doesn't cover as much screen as other protectors and also has black side bars you get a weird effect where there's screen, black bar, rest of the screen which is quite annoying.
Link575 said:
While I agree with you that it goes on nicely you didn't mention that since it doesn't cover as much screen as other protectors and also has black side bars you get a weird effect where there's screen, black bar, rest of the screen which is quite annoying.
Click to expand...
Click to collapse
yes there are black borders around SP which the top and bottom part aligns with the phone borders, so no issues there. Depending on an individual's taste, the side borders may be of concern. However, I made no mention of any weird effects as a result from the blk borders and / or the edges not being fully covered because I haven't experienced any negative effects thru general use of the phone. I must also mention, that in some apps, i.e. flipboard the first letters of words that display close to the edge of the screen may be partially blocked by the SP borders. But for me that's not a problem, as i don't experience this issue with most of the apps I use on a daily basis.
princeasi said:
yes there are black borders around SP which the top and bottom part aligns with the phone borders, so no issues there. Depending on an individual's taste, the side borders may be of concern. However, I made no mention of any weird effects as a result from the blk borders and / or the edges not being fully covered because I haven't experienced any negative effects thru general use of the phone. I must also mention, that in some apps, i.e. flipboard the first letters of words that display close to the edge of the screen may be partially blocked by the SP borders. But for me that's not a problem, as i don't experience this issue with most of the apps I use on a daily basis.
Click to expand...
Click to collapse
No I agree with you, I just thought people should know in case they're looking to purchase it. Like you said, 50 dollars is a lot for a SP especially if you didn't know the bars did that and it bothered you. I'll be keeping mine on until something better comes along, if ever.
Link575 said:
No I agree with you, I just thought people should know in case they're looking to purchase it. Like you said, 50 dollars is a lot for a SP especially if you didn't know the bars did that and it bothered you. I'll be keeping mine on until something better comes along, if ever.
Click to expand...
Click to collapse
Agreed!
They at least have an all clear one here with no black bars if you go to the select page, still doesn't look like it goes all the way to the sides https://m.aliexpress.com/item/32852...00_0109&spm=a2g0n.search-amp.list.32852741886
MACHEK said:
They at least have an all clear one here with no black bars if you go to the select page, still doesn't look like it goes all the way to the sides https://m.aliexpress.com/item/32852...00_0109&spm=a2g0n.search-amp.list.32852741886
Click to expand...
Click to collapse
Go ahead and buy it and return feedback to us.
Sent from my SM-N950U using Tapatalk
Limeybastard said:
Go ahead and buy it and return feedback to us.
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
i have tried these, good product in terms of clarity and touch sensitivity. the issue i had was that the vertical edges would easily crack with a bit of pressure as they dont seat on the screen as well as they should.
my current solution for using these is to remove the adhesive backing and reapply with loca adhesiveand cure with uv light.
itoYo said:
i have tried these, good product in terms of clarity and touch sensitivity. the issue i had was that the vertical edges would easily crack with a bit of pressure as they dont seat on the screen as well as they should.
my current solution for using these is to remove the adhesive backing and reapply with loca adhesiveand cure with uv light.
Click to expand...
Click to collapse
Ugh sounds like too much work lol
MACHEK said:
They at least have an all clear one here with no black bars if you go to the select page, still doesn't look like it goes all the way to the sides https://m.aliexpress.com/item/32852...00_0109&spm=a2g0n.search-amp.list.32852741886
Click to expand...
Click to collapse
Tested these a month ago. Cracked two working out bubbles. Glass quality is very bad. One cracked on the right side. The other on the bottom using a fingernail to work out a bubble. No chance that this is good 9h tempered glass. Opened a dispute and got both refunded. My opinion, not recommended.
Not recommended too, to narrow, covering edges with black bars completely.
http://s.aliexpress.com/rEZfMny6?fromSns=Copy to Clipboard
Not recommended too, same bad glass like the one posted and cutting display on the bottom
BBSW
http://s.aliexpress.com/BNjmaqIR?fromSns=Copy to Clipboard
Gesendet von meinem SM-N950F mit Tapatalk
ok so i purchased one and it arrived yesterday
while applying it i got some dust stuck under the protector, tried to take it out but it wouldnt move
applied it anyway and its pretty good except for the air bubbles near the curved sides of the screen (and the dust particles)
the protector is really fragile too, it chipped and cracked a corner while working out the bubbles - others have complained that theirs cracked for no reason
other than that it actually feels amazing and is compatible with the ringke fusion
ive contacted support, hopefully theyll send me out a new one
I wonder why they disabled comments in their video?
What's the best between this one and Dome Glas ?
I don't like the cut around speaker - face camera ...
A real full cover for front face is the most beautiful but may be not very good for quality of face camera ???