Database Develop

[SOLVED]Bootloader bricked, recovered, but fail when running firmware

Hello,
It had the original rom 4.4 on my XT1058 with root and unlocked bootloader, but was not getting running with 4.4.2 update for the original recovery. So I was going to be able to update and run fasthall.bat back to 4.2.2, but I opened the file and rebooted the machine to backup and forgot that it was open. Result: ****ed me.
I believe I have lost my bootloader, but following the tutorial of Gundabolu SC, unable to enter fastboot again, however, I can not run the sbf or RSD by flashall.bat.
I noticed that my phone with this LOCKED status, though I unlocked it.
To start the fastboot I run the code the tutorial I mentioned above, then it displays the following screen
Code:
[COLOR="Red"]Failed to hab check for gpt_main: 0x4e
CID Read Failure
Invalid CID Status 0x69
CustomerID error. Contact Dealer: 0xdead
No SP Partition found[/COLOR]
[COLOR="DarkOrange"]Fastboot Reason: Invalid CID[/COLOR]
For both methods to recovery, it becomes part of gpt.bin and when arrives at motoboot, of the following error message:
Code:
[COLOR="DarkOrange"]getvar max-download-size
downloading 32768 bytes
done
getvar max-download-size
downloading 1643008 bytes[/COLOR]
[COLOR="Red"]downgraded security version
update aboot version failed[/COLOR]
Can anyone help me?
------------
Problem solved thanks to XDA's amazing users!

feelknOck said:
Hello,
It had the original rom 4.4 on my XT1058 with root and unlocked bootloader, but was not getting running with 4.4.2 update for the original recovery. So I was going to be able to update and run fasthall.bat back to 4.2.2, but I opened the file and rebooted the machine to backup and forgot that it was open. Result: ****ed me.
I believe I have lost my bootloader, but following the tutorial of Gundabolu SC, unable to enter fastboot again, however, I can not run the sbf or RSD by flashall.bat.
For both methods, it becomes part of gpt.bin and when arrives at motoboot, of the following error message:
Code:
downgraded security version
aboot version update failed
Can anyone help me?
Click to expand...
Click to collapse
You can try go to this link Hope it helps
http://forums.androidcentral.com/mo...7371-unroot-unbrick-your-phone-using-sbf.html
---------- Post added at 04:31 PM ---------- Previous post was at 04:18 PM ----------
Did it worked??S i am too not quite sure about this??

manav113 said:
You can try go to this link Hope it helps
http://forums.androidcentral.com/mo...7371-unroot-unbrick-your-phone-using-sbf.html
Click to expand...
Click to collapse
I tried to recover via RSD several times, both with 4.4, as 4.2.2, but both have the same error.
In the RSD panel the following error message:
Code:
Failed flash process. 2/13 flash mootboot "motoboot.img" -> Phone returned FAIL.

quite a different error.NEVER heard of it>Wait let me ask my friends about it..

manav113 said:
quite a different error.NEVER heard of it>Wait let me ask my friends about it..
Click to expand...
Click to collapse
the issue is the bootloader you are trying to install dose not match the one installed so it will fail everytime we have to find the right one to get everything installed correct
so we need to grab the 100% correct firmware package for your phone.
the model you gave me is for the AT&T version
here is the 4.4 AT&T firmware try installing this one
http://sbf.droid-developers.org/download.php?device=0&file=4
let me know the outcome.

dray_jr said:
the issue is the bootloader you are trying to install dose not match the one installed so it will fail everytime we have to find the right one to get everything installed correct
so we need to grab the 100% correct firmware package for your phone.
the model you gave me is for the AT&T version
here is the 4.4 AT&T firmware try installing this one
http://sbf.droid-developers.org/download.php?device=0&file=4
let me know the outcome.
Click to expand...
Click to collapse
I'm downloading and post the result. 202 KB/s
Thank you!
-

dray_jr said:
the issue is the bootloader you are trying to install dose not match the one installed so it will fail everytime we have to find the right one to get everything installed correct
so we need to grab the 100% correct firmware package for your phone.
the model you gave me is for the AT&T version
here is the 4.4 AT&T firmware try installing this one
http://sbf.droid-developers.org/download.php?device=0&file=4
let me know the outcome.
Click to expand...
Click to collapse
Sorry for double post there.
I remember that my device is the XT1058, but Brazil.
I downloaded the sbf, removed the max-download-size and run the RSD, but he brought me the same errors.

Sounds like you need to wait for the full 4.4.2 Brazil image to be posted for download to recover the phone.

Steve-x said:
Sounds like you need to wait for the full 4.4.2 Brazil image to be posted for download to recover the phone.
Click to expand...
Click to collapse
Excuse me, but why do you think?
I did not get to install 4.4.2, I started to run the script flashall.bat 4.2.2 and thinking it would give time, it ended up damaging the bootloader.
Tried the firm indicated that dray_jr and 2 BR's, but it did not work.
I am very worried.

Did you try this, sounds like your trying to flash 4.2.2 firmware over 4.4.2 which won't work http://forum.xda-developers.com/showthread.php?t=2628940
Sent on my Gummy running Lenoto X

Do you get the "downgraded security version" error when trying to flash 4.2.2 and 4.4 ?

flashallthetime said:
Did you try this, sounds like your trying to flash 4.2.2 firmware over 4.4.2 which won't work http://forum.xda-developers.com/showthread.php?t=2628940
Sent on my Gummy running Lenoto X
Click to expand...
Click to collapse
I was going to try and probably would work (I've done this several times and has no secret), but it was not to start. I opened flashall.bat script but forgot to close it, because it was going back up yet, but the script detected the fastboot and started the process.
With seconds I removed the cable, barely gave it to start the first stage (before I left without turning back) and corrupted my bootloader.
I had the Original ROM 4.4 installed with root and unlocked bootloader, but even trying the 4.4 firmware I get the errors I described above.
Would have something to do with the tutorial I follow to start the fastboot?
I am Brazilian and even translating and reading what little I understand, I can not identify a problem as well. I'm scouring all here and trying something, but like I said, I am a layman and do not understand how the bootloader and related work.
Steve-x said:
Do you get the "downgraded security version" error when trying to flash 4.2.2 and 4.4 ?
Click to expand...
Click to collapse
With 2 firmwares I get the same error.

everytime i post here i reread the first thread and i am still not sure what you did.
so im going to ask some questions and see if we can't get some more info on this issue
1. Your device was 4.4 unlocked bootloader and rooted
2. did you try and install the 4.4.2 firmware
3. your device is the AT&T model but from Brazil
because if you are getting the gpt error on both 4.2.2 and 4.4 and it would lead me to think that the 4.4.2 bootloader is installed on your device.

dray_jr said:
everytime i post here i reread the first thread and i am still not sure what you did.
so im going to ask some questions and see if we can't get some more info on this issue
1. Your device was 4.4 unlocked bootloader and rooted
2. did you try and install the 4.4.2 firmware
3. your device is the AT&T model but from Brazil
because if you are getting the gpt error on both 4.2.2 and 4.4 and it would lead me to think that the 4.4.2 bootloader is installed on your device.
Click to expand...
Click to collapse
He removed the cable as it was flashing, can you get to the fastboot screen?
Sent on my Gummy running Lenoto X

dray_jr said:
everytime i post here i reread the first thread and i am still not sure what you did.
so im going to ask some questions and see if we can't get some more info on this issue
1. Your device was 4.4 unlocked bootloader and rooted
2. did you try and install the 4.4.2 firmware
3. your device is the AT&T model but from Brazil
because if you are getting the gpt error on both 4.2.2 and 4.4 and it would lead me to think that the 4.4.2 bootloader is installed on your device.
Click to expand...
Click to collapse
1. Yes, I was running 4.4 with unlocked bootloader and rooted
2. I installed the original recovery to try the OTA update for version 4.4.2, but he returned me error halfway through the update, because my ROM was modified. That's when I thought of going back to 4.2.2 without changes and run the 4.4.2.
3. My device is the XT1058 Retail Brazil.
flashallthetime said:
He removed the cable as it was flashing, can you get to the fastboot screen?
Click to expand...
Click to collapse
Yes, I can start the fastboot via script "qflash.exe with (PORT NUMBER)-ramload MPRG8960.hex-mbn 33 MSM8960_bootloader_singleimage.bin-v-o" with a blank bootloader.

feelknOck said:
1. Yes, I was running 4.4 and unlocked bootloader routed.
2. I installed the original recovery to try the OTA update for version 4.4.2, but he returned me error halfway through the update, because my ROM was modified. That's when I thought of going back to 4.2.2 without changes and run the 4.4.2.
3. My device is the XT1058 Retail Brazil.
Yes, I can start the fastboot via script "qflash.exe with (PORT NUMBER)-ramload MPRG8960.hex-mbn 33 MSM8960_bootloader_singleimage.bin-v-o" with a blank bootloader.
Click to expand...
Click to collapse
ok if i remember well first flash recovery from 4.4 firmware
mfastboot flash recovery recovery.img
after then u ll be able to flash entire image of 4.4.2

could it be that even thou the 4.4.2 update failed that it still installed the new bootloader and that is why nothing else will install.
but either way he could flash the 4.4 firmware without the gpt file and then take the OTA and everything should be fine.

danger2u said:
ok if i remember well first flash recovery from 4.4 firmware
mfastboot flash recovery recovery.img
after then u ll be able to flash entire image of 4.4.2
Click to expand...
Click to collapse
Before having this problem I tried all that.
I installed the original recovery and tried to upgrade to 4.4.2 but it gave error in the middle of the update and restarted the phone saying that the software update was not completed.

dray_jr said:
could it be that even thou the 4.4.2 update failed that it still installed the new bootloader and that is why nothing else will install.
but either way he could flash the 4.4 firmware without the gpt file and then take the OTA and everything should be fine.
Click to expand...
Click to collapse
I will remove the line from gpt and try again.
Earlier I was testing at work and now I'm home. The 4.4 firmware download this lingering: (

you really can't cause anymore problems so this is what i would try because from what i have read if you try to install 4.2.2 or 4.4 you the a gpt.bin verification error. which means that neither 4.2.2 or 4.4 are the right bootloader.
That leaves us with some how the 4.4.2 bootloader got installed because it is the only bootloader that can't go to 4.4 so with that being said.
I would download the correct 4.4 firmware for your phone.
extract it
and use the below adb commands to install it but leave out the gpt.bin flash command
Code:
*leave this one out*fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
mfastboot flash system system.img
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot reboot
i think everything should install fine and your phone should boot up and from what i have read you should still be able to take the 4.4.2 OTA without bricking your phone

[Q] [XT1068] [Stock 4.4.4] Does Rooting and custom recovery break the OTA?!

I have unlocked bootloader, flashed Custom Recovery TWRP to my Moto G2 XT1068 and rooted on 4.4.4 stock, while waiting for the official lollipop updates.
So does this break the OTA, and if so how to enable it again?!

Yes you don't get official Lollipop OTA if you unlock your bootloader. For getting official OTA you have to unroot ur phone and relock the bootloader

sumit227 said:
Yes you don't get official Lollipop OTA if you unlock your bootloader. For getting official OTA you have to unroot ur phone and relock the bootloader
Click to expand...
Click to collapse
Okay, understood. thanks mate

And a few threads along the road you will read:Just do a full unroot and reflash stock recovery,unlocked bootloader is no problem for capturing OTA.
I don't know.....
Sent from my XT1068 using XDA Free mobile app

Rooting didnt affect OTA with my old moto g upgrading from 4.4.2 to 4.4.4 and probably wont affect the new moto g too

epivitor said:
Rooting didnt affect OTA with my old moto g upgrading from 4.4.2 to 4.4.4 and probably wont affect the new moto g too
Click to expand...
Click to collapse
No. You will receive ota but you can't install it. For root to work, /system has to be modified. The OTA-package will recognize this and refuses to install.
sumit227 said:
Yes you don't get official Lollipop OTA if you unlock your bootloader. For getting official OTA you have to unroot ur phone and relock the bootloader
Click to expand...
Click to collapse
Also not true. OTA does not require a relock. Only unroot and stock-recovery is required.
Wolfcity said:
And a few threads along the road you will read:Just do a full unroot and reflash stock recovery,unlocked bootloader is no problem for capturing OTA.
I don't know.....
Sent from my XT1068 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, because it is a fact.

doppelhelix said:
Also not true. OTA does not require a relock. Only unroot and stock-recovery is required.
Click to expand...
Click to collapse
Wolfcity said:
And a few threads along the road you will read:Just do a full unroot and reflash stock recovery,unlocked bootloader is no problem for capturing OTA.
I don't know.....
Click to expand...
Click to collapse
Oh my bad sorry, for OTA we don't need to relock I think relock is for regain the warranty correct me if I'm wrong.

Thanks for the answers guys.
Now why the heck i can't relock the bootloader whatever i do?! did anyone successfully relocked the bootloader before, and if so. how?!
i've followed all the guides around and it always give me errors and i can't flash rom!!
and in fact isnt really any useful to relock it?!

solly84 said:
it always give me errors and i can't flash rom!!
Click to expand...
Click to collapse
That's a bit vague. Please post exactly the output on your screen.

doppelhelix said:
That's a bit vague. Please post exactly the output on your screen.
Click to expand...
Click to collapse
sure!
seems like i cant relock my bootloader, whenever i do all the sequence of flashing the stock rom without the "oem lock begin" everything goes smoothly and i can restore to stock image.
as soon as i put "oem lock begin" i got a error in boot.img:
bootloader preflash validation failed
bootloader invalid signed image
and it doesn't continue...

solly84 said:
bootloader preflash validation failed
bootloader invalid signed image
Click to expand...
Click to collapse
Maybe the rom currently installed and the rom you try to flash and lock are not the same. Or, at one point you installed a rom that had a version above your current one. There are some partitions that can't be downgraded, like gpt and motoboot (which is the bootloader). Subsequently the lock will fail. Anyway, locking the bootloader is absolutely not necessary. There is no benefit in doing so.

doppelhelix said:
Maybe the rom currently installed and the rom you try to flash and lock are not the same. Or, at one point you installed a rom that had a version above your current one. There are some partitions that can't be downgraded, like gpt and motoboot (which is the bootloader). Subsequently the lock will fail. Anyway, locking the bootloader is absolutely not necessary. There is no benefit in doing so.
Click to expand...
Click to collapse
Yeah, i had tried a lot of Roms, so maybe that is why. And now i am on Custom Lollipop Rom (Titan)...
but eventually as you said, its not necessary, so i will just forget about it.
Thanks man.

[Q] Moto X AT&T is STUCK on Bootloader! [HELP]

Hi guys, yesterday i tried to install ROM "XT1058_GHOST_RETBR_5.1_LPA23.12-15_cid12_CFC.xml" to my moto X 1058 At&T (android 4.4.4) with RSD litle.
It failed and now i only can turn on the phone and it goes to bootloader menu and i cant do anything. I can connect it to my PC and RSD detect it but i cant put any kind of ROM ((
I know that my moto x is not dead yet i have hope u.u :crying:
Please someone can help me? :crying:
PS: SORRY MY ENGLISH
PS2: I ADD A SCREENSHOT WITH SOME DETAILS ABOUT MY MOTO X after DO what i explain.

First off, you have an ATT XT1058... why are you trying to flash XT1058_GHOST_RETBR.... which is for RETAIL BRAZIL!?!
Is your bootloader locked or unlocked?
EDIT: never mind, I read here -> http://forum.xda-developers.com/showpost.php?p=61834453&postcount=78 then you have a locked bootloader...
so my advice...
Try to boot into stock recovery, and wipe cache, and reboot.
If that doesn't work.. try a factory reset (also from inside stock recovery) NOTE: this will delete your data, apps, pix, music, anything on the phone's /sdcard... etc..
Next, would be to try to re-flash Stock ATT 4.4.4 SBF using mfastboot (see the requirements and option 5 in post 2 of -> http://forum.xda-developers.com/moto-x/general/faq-how-to-prepare-ota-update-carriers-t3126425 )
If that doesn't work... then you have no choice but to wait until the 5.1 SBF for ATT XT1058 leaks and is posted... and flash that using mFastboot.

KidJoe said:
First off, you have an ATT XT1058... why are you trying to flash XT1058_GHOST_RETBR.... which is for RETAIL BRAZIL!?!
Is your bootloader locked or unlocked?
EDIT: never mind, I read here -> http://forum.xda-developers.com/showpost.php?p=61834453&postcount=78 then you have a locked bootloader...
so my advice...
Try to boot into stock recovery, and wipe cache, and reboot.
If that doesn't work.. try a factory reset (also from inside stock recovery) NOTE: this will delete your data, apps, pix, music, anything on the phone's /sdcard... etc..
Next, would be to try to re-flash Stock ATT 4.4.4 SBF using mfastboot (see the requirements and option 5 in post 2 of -> http://forum.xda-developers.com/moto-x/general/faq-how-to-prepare-ota-update-carriers-t3126425 )
If that doesn't work... then you have no choice but to wait until the 5.1 SBF for ATT XT1058 leaks and is posted... and flash that using mFastboot.
Click to expand...
Click to collapse
Into bootloader any option work, only for get pictures from IMEI, ID, etc.
I will try re flash stock ATT using mfastboot cause trying do this in RSD doesnt work
One friend told me he solved his problem unlocking bootloader by a program that unlock it automatic, then he instaled android 4.4.4.
My question is that if can i do what you are telling me cause in stock recovery appear 30.BE unde AP Fastboot Flash Mode (s) line. And it mean 30.BE= android 5.1 brazil so maybe i have to do a downgrade?
i dont know if you undestand me.
Thanks for your time

NEW INFO
i will writte more datails:
After i tryed install failed Brasil ROM the info about my cellphone is the next:
Bootloader version: 30.BE (sha-34b7ccb, 2015-04-22 12:57:17)
Bootloader is: LOCKED (and can´t be unlocked by motorola steps cause my moto x is AT&T)
Thinking about it and looking for a lot places from 2 days i have next conclusion:
How now i have bootloader version "30.BE" i have two options:
First: Downgrade android but i need unlocked bootloader for do it.
Second option: Wait until ROM android 5.1 by AT&T (i read update is ready but i cant find ROM, i only found ZIP for put in my internal memory and update android from old android but i cant access to my internal memory cause my PC does recognized like memory device)
What do you think guys?

zloopa said:
Into bootloader any option work, only for get pictures from IMEI, ID, etc.
I will try re flash stock ATT using mfastboot cause trying do this in RSD doesnt work
One friend told me he solved his problem unlocking bootloader by a program that unlock it automatic, then he instaled android 4.4.4.
My question is that if can i do what you are telling me cause in stock recovery appear 30.BE unde AP Fastboot Flash Mode (s) line. And it mean 30.BE= android 5.1 brazil so maybe i have to do a downgrade?
i dont know if you undestand me.
Thanks for your time
Click to expand...
Click to collapse
I can tell that English (or at least USA Engish) isn't your primary language, so hopefully you can understand me too
An ATT XT1058 that has never been updated to 4.4.4 or above can use Sunshine to unlock the bootloader. Since you've had 4.4.4 and above on there, you can't unlock.
30.BE is a 5.1 bootloader. That is part of your problem. Somehow, parts of the XT1058_GHOST_RETBR... 5.1 SBF did flash to your phone, but not all of it..
Are you sure you didn't unlock your bootloader? Boot to FastbootAP/Bootloader screen and tell me what you see.. Do you see LOCKED STATUS 0, or Locked Status 2, or Unlocked Status 3?
---------- Post added at 07:23 AM ---------- Previous post was at 07:18 AM ----------
zloopa said:
i will writte more datails:
After i tryed install failed Brasil ROM the info about my cellphone is the next:
Bootloader version: 30.BE (sha-34b7ccb, 2015-04-22 12:57:17)
Bootloader is: LOCKED (and can´t be unlocked by motorola steps cause my moto x is AT&T)
Thinking about it and looking for a lot places from 2 days i have next conclusion:
How now i have bootloader version "30.BE" i have two options:
First: Downgrade android but i need unlocked bootloader for do it.
Second option: Wait until ROM android 5.1 by AT&T (i read update is ready but i cant find ROM, i only found ZIP for put in my internal memory and update android from old android but i cant access to my internal memory cause my PC does recognized like memory device)
What do you think guys?
Click to expand...
Click to collapse
Your first option is not correct. You can't fully downgrade, even with an unlocked bootloader. You can partially downgrade, but that isn't 100% safe. There is a very good chance it wont work, or you'll brick even worse when trying to downgrade, or later when taking the OTA.
For your second option.. Correct. As of yet, the FULL SBF of 5.1 for ATT hasn't leaked. Only the OTA Zip file which is an incremental update, not a full update, and therefore can't be used to recover in this state. Sit tight. Its only a matter of time.
I know you probably want to use your phone NOW, so waiting isn't a good option... but it is likely your only SAFE option right now.

KidJoe said:
I can tell that English (or at least USA Engish) isn't your primary language, so hopefully you can understand me too
An ATT XT1058 that has never been updated to 4.4.4 or above can use Sunshine to unlock the bootloader. Since you've had 4.4.4 and above on there, you can't unlock.
30.BE is a 5.1 bootloader. That is part of your problem. Somehow, parts of the XT1058_GHOST_RETBR... 5.1 SBF did flash to your phone, but not all of it..
Are you sure you didn't unlock your bootloader? Boot to FastbootAP/Bootloader screen and tell me what you see.. Do you see LOCKED STATUS 0, or Locked Status 2, or Unlocked Status 3?
---------- Post added at 07:23 AM ---------- Previous post was at 07:18 AM ----------
Your first option is not correct. You can't fully downgrade, even with an unlocked bootloader. You can partially downgrade, but that isn't 100% safe. There is a very good chance it wont work, or you'll brick even worse when trying to downgrade, or later when taking the OTA.
For your second option.. Correct. As of yet, the FULL SBF of 5.1 for ATT hasn't leaked. Only the OTA Zip file which is an incremental update, not a full update, and therefore can't be used to recover in this state. Sit tight. Its only a matter of time.
I know you probably want to use your phone NOW, so waiting isn't a good option... but it is likely your only SAFE option right now.
Click to expand...
Click to collapse
I never tried to unlock bootloader and before start to trying to upgrade to 5.1 brazil, bootloader appear "DEVICE IS: LOCKED" and now appear the same "LOCKED AND STATUS 0". (check the image if you can)
The question now is: maybe you know if the solution is wait until 5.1 Android for AT&T or even if i have this ROM maybe exist a possibility that my moto doesn't get fix? Maybe the question is hard to confirm 100% but maybe it is a 90 % possible that my moto get fix with this way.
I love this phone but i was too newbie and I confused ways to change ANDROID by mys XPERIA and HTC's phones.

zloopa said:
I never tried to unlock bootloader and before start to trying to upgrade to 5.1 brazil, bootloader appear "DEVICE IS: LOCKED" and now appear the same "LOCKED AND STATUS 0". (check the image if you can)
The question now is: maybe you know if the solution is wait until 5.1 Android for AT&T or even if i have this ROM maybe exist a possibility that my moto doesn't get fix? Maybe the question is hard to confirm 100% but maybe it is a 90 % possible that my moto get fix with this way.
I love this phone but i was too newbie and I confused ways to change ANDROID by mys XPERIA and HTC's phones.
Click to expand...
Click to collapse
I hate to say it, but yeah, you're likely stuck until an ATT 5.1 SBF is posted somewhere.

KidJoe said:
I hate to say it, but yeah, you're likely stuck until an ATT 5.1 SBF is posted somewhere.
Click to expand...
Click to collapse
I have this:
http://www.filefactory.com/file/2kmrq89bx1h/XT1058_GHOST_ATT_5.1_LPA23.12-21.1_cid1_CFC.xml.zip
What do you recommed to do?
Whit RSD or do you have some guide for fix my cellphone

zloopa said:
I have this:
http://www.filefactory.com/file/2kmrq89bx1h/XT1058_GHOST_ATT_5.1_LPA23.12-21.1_cid1_CFC.xml.zip
What do you recommed to do?
Whit RSD or do you have some guide for fix my cellphone
Click to expand...
Click to collapse
As I said earlier... flash using mfastboot (see the requirements and option 5 in post 2 of -> http://forum.xda-developers.com/moto-x/general/faq-how-to-prepare-ota-update-carriers-t3126425 ) just use that 5.1 SBF... and I would consider including the mfastboot erase userdata command, or doing a factory reset after you flash... Yes it will erase your data, apps, SDCard, etc...

GHOST_ATT_5.1_LPA23.12-21.1_cid1_CFC.xml
also failed
error on GPT ..
Bootloader 30BE
accidentally flashed verizon Lollipop bootloader on it ..
now LP 5.1 ATT not working on it

aamszia said:
GHOST_ATT_5.1_LPA23.12-21.1_cid1_CFC.xml
also failed
error on GPT ..
Bootloader 30BE
accidentally flashed verizon Lollipop bootloader on it ..
now LP 5.1 ATT not working on it
Click to expand...
Click to collapse
Hi in same situation. Did u fixed it?

Bootloader locked - cannot flash stock verification error

I flashed the wrong firmware and now my bootloader locked g6 is stuck in bootloader mode. Cannot flash stock due to validation errors. Any ideas to help me fix this?

hydroman202 said:
I flashed the wrong firmware and now my bootloader locked g6 is stuck in bootloader mode. Cannot flash stock due to validation errors. Any ideas to help me fix this?
Click to expand...
Click to collapse
Try to unlock bootloader and the reflash stock (don't go back to older version but go forward to next version):
https://mirrors.lolinet.com/firmware/moto/ali/official/

HueyT said:
Try to unlock bootloader and the reflash stock (don't go back to older version but go forward to next version):
https://mirrors.lolinet.com/firmware/moto/ali/official/
Click to expand...
Click to collapse
I really appreciate your response. My bootloader is ineligible to be unlocked. I can flash the bootloader partition. The ones I can't flash are boot, oem, system, gpt, and a few other critical ones. The other issue I run into is the validation error when I do flash a new firmware. The stock won't flash due to security downgrade issues. If there is a way to get around it I would appreciate any and all help!

hydroman202 said:
I really appreciate your response. My bootloader is ineligible to be unlocked. I can flash the bootloader partition. The ones I can't flash are boot, oem, system, gpt, and a few other critical ones. The other issue I run into is the validation error when I do flash a new firmware. The stock won't flash due to security downgrade issues. If there is a way to get around it I would appreciate any and all help!
Click to expand...
Click to collapse
What is your exact model? You may have to wait for Pie official or next monthly update to flash

HueyT said:
What is your exact model? You may have to wait for Pie official or next monthly update to flash
Click to expand...
Click to collapse
The model is xt1925dl

I
hydroman202 said:
I flashed the wrong firmware and now my bootloader locked g6 is stuck in bootloader mode. Cannot flash stock due to validation errors. Any ideas to help me fix this?
Click to expand...
Click to collapse
https://mirrors.lolinet.com/firmwar...bsidy-TRAC_ONE_regulatory-DEFAULT_CFC.xml.zip is the Nov. Firmware. If this does not flash, then you have to wait for newer firmware

HueyT said:
https://mirrors.lolinet.com/firmwar...bsidy-TRAC_ONE_regulatory-DEFAULT_CFC.xml.zip is the Nov. Firmware. If this does not flash, then you have to wait for newer firmware
Click to expand...
Click to collapse
It would not flash however I found blankflash file for g6 ali variant. Is there a way I can use that without being in qualcomm mode?

hydroman202 said:
It would not flash however I found blankflash file for g6 ali variant. Is there a way I can use that without being in qualcomm mode?
Click to expand...
Click to collapse
Unfortunately, you're screwed until newer firmware that's later than 11/18 is released for your Trackfone/Straight Talk G6 or return for exchange for a new phone ?

Fastboot flash for moto e4 plus Nicklaus (xt1770)

Hello folks,
Recently I rooted my phone succefully (Moto e4 plus X1770 Nicklaus),then after a reset my phone started booting into twrp only.
When I try to flash stock ROM via SP flash it boots up on USB connect. Now I want to use fastboot flash method to go back to stock but I don't know how to do it
Can anyone please tell me how to flash stock ROM via fastboot method thank you in advance

TechnoTemplar said:
Hello folks,
Recently I rooted my phone succefully (Moto e4 plus X1770 Nicklaus),then after a reset my phone started booting into twrp only.
When I try to flash stock ROM via SP flash it boots up on USB connect. Now I want to use fastboot flash method to go back to stock but I don't know how to do it
Can anyone please tell me how to flash stock ROM via fastboot method thank you in advance
Click to expand...
Click to collapse
Have u installed vcom drivers??

smart123123 said:
Have u installed vcom drivers??
Click to expand...
Click to collapse
Thanks for the help. I managed to flash the stock ROM in fastboot using the flash-all script

TechnoTemplar said:
Thanks for the help. I managed to flash the stock ROM in fastboot using the flash-all script
Click to expand...
Click to collapse
Ok... So are u able to udate it now... Or it is showing uptodate?? Ajd are u having device unlocked status??

smart123123 said:
Ok... So are u able to udate it now... Or it is showing uptodate?? Ajd are u having device unlocked status??
Click to expand...
Click to collapse
The bootloader is unlocked and I'm not receiving any updates

TechnoTemplar said:
The bootloader is unlocked and I'm not receiving any updates
Click to expand...
Click to collapse
Just after the flash... Did u received any update??

smart123123 said:
Just after the flash... Did u received any update??
Click to expand...
Click to collapse
No I don't received any update after the flash.

TechnoTemplar said:
No I don't received any update after the flash.
Click to expand...
Click to collapse
Yea... Thats the thing... For volte we need update but that we can't receive after unlocking... Is there any way to do this??

smart123123 said:
Yea... Thats the thing... For volte we need update but that we can't receive after unlocking... Is there any way to do this??
Click to expand...
Click to collapse
Yup There are two methods..
One Search for the latest stock rom and flash it secoundly if you don't find the latest stock rom lock the bootloader. I prefer to use bootloader lock method.:highfive:

TechnoTemplar said:
Yup There are two methods..
One Search for the latest stock rom and flash it secoundly if you don't find the latest stock rom lock the bootloader. I prefer to use bootloader lock method.:highfive:
Click to expand...
Click to collapse
Like using... Fastboot oem lock or something else... Nd are we able to receive update after that??

TechnoTemplar said:
Thanks for the help. I managed to flash the stock ROM in fastboot using the flash-all script
Click to expand...
Click to collapse
Hi... i dont speak english so...anyway i need help i have a moto e4 plus XT1773 nicklaus and the stock firmware i downloaded doesnt have the flash all command so i cant flash it, its there another way to flash the rom via fastboot? SP doesnt detect my phone

u can roll back on stock with this tool, my phone was rooted and it was unlocked. link for tool: Here

Help: Same problem
TechnoTemplar said:
Yup There are two methods..
One Search for the latest stock rom and flash it secoundly if you don't find the latest stock rom lock the bootloader. I prefer to use bootloader lock method.:highfive:
Click to expand...
Click to collapse
Hi Techno,
How exactly did you do it? it's been so long since i used to play with rooting phones. and i found one phone that made me wanna root. Moto E4 plus. after all the steps, now am stucked to TWRP. i tried to flash magisk but still goes back to twrp.
TWRP: twrp-3.2.3-0-nicklaus
instead of: twrp-3.2.3-1-nicklaus, issue file too large
i'm not trying to revert back to original, im still pushing to root the phone. but, im stucked.
what could i possibly have done wrong?
Thanks in advance!