Database Develop

[Q] Black Screen after boot animation

Hi,
I have a moto g 2014 xt1068 stuck at a black screen just after the motorola boot animation.
The beginning:
It all started because one guy started messing with the phone, unlocked it's bootloader and installed some custom roms. As the guy told me, the phone run out of juice while "configuring the android apps" phase and after charging it got stuck after the boot animation ever since.
What i tried to fix the phone:
First i tried to install multiple stock roms, from for example windows-tool-moto-g-2014-xt1064-restore.
I did it in osx and adapted the bash script, following every command. It always worked perfectly while flashing but after restarting i got the same result every time - black screen after boot animation.
One example of my flashing script
Code:
#!/bin/sh
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
read -p "Press [Enter] key to reboot..."
mfastboot reboot
echo "Finished!"
Then i tried to install a custom recovery tool:
I picked TWRP and downloaded it from both the official website and this thread. The flashing went smoothly but when i restarted it, got into fastboot, selected the recovery and booted to the recovery it booted into the stock recovery! My flashing didn't made any difference whatsoever.
The commands to flash the twrp img
Code:
$ mfastboot flash recovery TWRP_2.8.0.1_Titan_v2.img
$ mfastboot reboot recovery
Finally someone told me that sometimes some phones can be fixed by unplugging the battery...
I did it as a moment of pure despair and open the phone, unplugged the cable from the board and got everything together again. After trying to flash a stock rom and a custom recovery i got the same results as above.
I really would apreciate some help. Anything i should try? Something i did wrong?
Thanks in advance for any help.
Vinxe

Did you try wiping ur cache and Dalvik-cache?? And when do u see the black screen, after the motorola logo or after the boot animation??

[BRICK?] Moto G 8GB XT1064

Hello XDA!
- Canadian Moto G 2014 XT1064 (8 GB)
- Bootloader Locked
- Unable to enable USB debugging since "bricked"
1) I downloaded Motorola Drivers, fastboot, mfastboot v2, RETUAWS_XT1064_5.0.2_LXB22.46-28_cid9_CFC.xml.zip
2) My Moto G was able to go into boot loader mode, but now it won't.
3. I was trying to:
mfastboot oem lock begin
mfastboot flash partition gpt.bin
mfastboot flash motoboot motoboot.img - it fails on this step -> something about a failed partition
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
Now my device won't even turn on (can't go into boot loader mode)
Any suggestions?!!? Let's fix this together

NEVER FLASH STOCK FIRMWARE ON A LOCKED BOOTLOADER !
UNLOCK bootloader first and then only flash stock firmware via fastboot mode by PC.
Try going to Service Center, maybe they will have to change the motherboard of your G2.

Moto G XT1068 2014 bricked and stuck in fastboot

I tried to flash my Moto G XT1068 from Android Open Source Project (AOSP) 5.1.1 to the stock firmware and relock the bootloader.
I followed these steps I found on a website:
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe oem lock
mfastboot.exe reboot
After I had typed those to the command prompt on the folder I had placed the firmware and mfastboot v2 I found out that the phone didnt reboot, and that it was stuck in the fastboot mode where it says failed to validate system image and something about falling-through boot mode or something.
I read the text again carefully that I didn't do anything wrong, and I didnt. I went to the comments and there were people complaining that it doesnt work and you need to add one command more
mfastboot.exe flash system system.img_sparsechunk.3
well I did type that to the command prompt and it did nothing after I tried to reboot again, so I typed all the commands again including the command I mentioned, and still nothing.
now I'm stuck in the fastboot mode where it says:
Failed to validate system image
Fastboot reason: fall-through from not charger boot mode
I'm begging for immediate help

I got the bootloader re-unlocked
I got the phone's bootloader re-unlocked
I'll keep posting more info If I dont solve this mess myself

Munkkimake said:
I tried to flash my Moto G XT1068 from Android Open Source Project (AOSP) 5.1.1 to the stock firmware and relock the bootloader.
I followed these steps I found on a website:
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe oem lock
mfastboot.exe reboot
After I had typed those to the command prompt on the folder I had placed the firmware and mfastboot v2 I found out that the phone didnt reboot, and that it was stuck in the fastboot mode where it says failed to validate system image and something about falling-through boot mode or something.
I read the text again carefully that I didn't do anything wrong, and I didnt. I went to the comments and there were people complaining that it doesnt work and you need to add one command more
mfastboot.exe flash system system.img_sparsechunk.3
well I did type that to the command prompt and it did nothing after I tried to reboot again, so I typed all the commands again including the command I mentioned, and still nothing.
now I'm stuck in the fastboot mode where it says:
Failed to validate system image
Fastboot reason: fall-through from not charger boot mode
I'm begging for immediate help
Click to expand...
Click to collapse
As far as I can see, you didn't lock the bootloader corectly, use this: http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657

I have same problem, I had to unlock the bootloader again and it worked like normal. I ended up reflashing twrp and going back to 5.1.1 aosp rom. To clarify your phone is probably not bricked. Re unlock the bootloader with fastboot oem unlock {unique code} and flash twrp and the rom of your choice.

ethanchow said:
I have same problem, I had to unlock the bootloader again and it worked like normal. I ended up reflashing twrp and going back to 5.1.1 aosp rom. To clarify your phone is probably not bricked. Re unlock the bootloader with fastboot oem unlock {unique code} and flash twrp and the rom of your choice.
Click to expand...
Click to collapse
-----Update----
I think I have it fixed: just flash the system images again after you do
Code:
fastboot oem lock
You seem to have to flash them twice
Code:
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4

ethanchow said:
-----Update----
I think I have it fixed: just flash the system images again after you do
Code:
fastboot oem lock
You seem to have to flash them twice
Code:
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
Click to expand...
Click to collapse
you found this to be working? What firmware file are you using?

ethanchow said:
-----Update----
I think I have it fixed: just flash the system images again after you do
Code:
fastboot oem lock
You seem to have to flash them twice
Code:
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
Click to expand...
Click to collapse
and in that code you arent using mfastboot? Is there no use for it?

Munkkimake said:
you found this to be working? What firmware file are you using?
Click to expand...
Click to collapse
I am using lastest one for xt1064 from here forum.xda-developers.com/moto-g-2014/orig-development/original-motorola-firmware-collection-t3153533
For adb and fastboot I am using the 15 second installer, no mfastboot.
I managed to successfully relock the bootloader and get the phone to boot to stock rom but the "unlock warning" boot logo still appears.

ethanchow said:
I am using lastest one for xt1064 from here forum.xda-developers.com/moto-g-2014/orig-development/original-motorola-firmware-collection-t3153533
For adb and fastboot I am using the 15 second installer, no mfastboot.
I managed to successfully relock the bootloader and get the phone to boot to stock rom but the "unlock warning" boot logo still appears.
Click to expand...
Click to collapse
you think that the unlock warning could somehow be removed with a locked bootloader?

Munkkimake said:
you think that the unlock warning could somehow be removed with a locked bootloader?
Click to expand...
Click to collapse
i don't know if works on stock bootloader locked, but you can try after you are on stock rom the command
mfastboot.exe flash logo logo.bin
with a modify boot logo like this but dont know if will works on locked bootloader...
if you try and the command is accepted and the device don't boot use the command again with the logo.bin file that is in the stock XML zip that you download.
in the case of not be able to flash and error that you described on OP.
before do the commands you need to check how many system.img_sparsechunk files you have and change the commands line according.
Motorola stock rom's may have up to 6 of those file maybe more in the future, the 5x.x have 4 to 6 so you need to add the lines in the script before:
mfastboot.exe flash modem NON-HLOS.bin
the rest doesn't change

All you need is
this official firmware of XT1068 https://drive.google.com/file/d/0Bzr0qvz6uRerOGRfOEptU2p0ZkU/view?usp=sharing
This is the complete zip which is having mfastboot v2 also in that and you just now need to flash below commands correctly, and you're done.
Code:
------------------------------------------------------------------|
Moto G 2014 Stock 5.0.2 Restore Script
mfastboot.exe oem lock begin
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash system system.img_sparsechunk.4
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe oem lock
mfastboot.exe reboot
------------------------------------------------------------------|
hope this'll help you out
Also if you wanna get rid of that "Unlocked Warning" boot logo, you can easily flash any of the logo.bin file successfully on a locked bootloader too. So you can flash your own bootlogo, custom or stock, as you prefer.
Thanks

Thanks!
ArtRahul said:
this official firmware of XT1068 https://drive.google.com/file/d/0Bzr0qvz6uRerOGRfOEptU2p0ZkU/view?usp=sharing
This is the complete zip which is having mfastboot v2 also in that and you just now need to flash below commands correctly, and you're done.
Code:
------------------------------------------------------------------|
Moto G 2014 Stock 5.0.2 Restore Script
mfastboot.exe oem lock begin
mfastboot.exe flash partition gpt.bin
mfastboot.exe flash motoboot motoboot.img
mfastboot.exe flash logo logo.bin
mfastboot.exe flash boot boot.img
mfastboot.exe flash recovery recovery.img
mfastboot.exe flash system system.img_sparsechunk.0
mfastboot.exe flash system system.img_sparsechunk.1
mfastboot.exe flash system system.img_sparsechunk.2
mfastboot.exe flash system system.img_sparsechunk.3
mfastboot.exe flash system system.img_sparsechunk.4
mfastboot.exe flash modem NON-HLOS.bin
mfastboot.exe erase modemst1
mfastboot.exe erase modemst2
mfastboot.exe flash fsg fsg.mbn
mfastboot.exe erase cache
mfastboot.exe erase userdata
mfastboot.exe oem lock
mfastboot.exe reboot
------------------------------------------------------------------|
hope this'll help you out
Also if you wanna get rid of that "Unlocked Warning" boot logo, you can easily flash any of the logo.bin file successfully on a locked bootloader too. So you can flash your own bootlogo, custom or stock, as you prefer.
Thanks
Click to expand...
Click to collapse
Well I got the stock firmware through an automatic installer and yes the phone let me flash the logo.bin waiting for the official 5.1

Munkkimake said:
Well I got the stock firmware through an automatic installer and yes the phone let me flash the logo.bin waiting for the official 5.1
Click to expand...
Click to collapse
with locked bootloader you flash the logo.bin and the logo warning disappeared?

Yes and it worked! I have no longer proof of that the warranty has been void / the warranty is back
Sent from my XT1068 using XDA Free mobile app

Munkkimake said:
Yes and it worked! I have no longer proof of that the warranty has been void / the warranty is back
Sent from my XT1068 using XDA Free mobile app
Click to expand...
Click to collapse
ok is nice to know that works. But only to remove that warning thing...
Because the bootloader have 3 stats:
Status code 0 =locked with warranty
Status code 3 = unlocked without warranty
Status code 2= relocked but also without warranty
check in the bootloader screen yours must be 2...
Status code 1 is unknown.

baybutcher27 said:
ok is nice to know that works. But only to remove that warning thing...
Because the bootloader have 3 stats:
Status code 0 =locked with warranty
Status code 3 = unlocked without warranty
Status code 2= relocked but also without warranty
check in the bootloader screen yours must be 2...
Status code 1 is unknown.
Click to expand...
Click to collapse
Oh, according to that, the tool program which installed the firmware, didnt lock the bootloader. I assumed that it was locked cause i was told that the bootloader warning still exists after relocking so...
Sent from my XT1068 using XDA Free mobile app

Moto G 2014 LTE XT1078 How do I restore stock rom?

Did someone had success restoring stock rom in this device?
I wanted to restore the stock rom, but I have seen people reporting hard bricks after any procedure.
A user posted this Firmware, which is supposedly for my phone.
XT1078_THEA_RETBR_DS_5.0.2_LXB22.99-24.12_cid12_subsidy-DEFAULT_CFC.xml.zip
I was thinking in follow the instructions that the user mendelssohn give here . Maybe I could use that script in this firmware, but do not know if it would work.
Someone managed to do this procedure successfully? If so, what is right procedure?
Thanks in advance.

I've been looking for how to restore the stock recovery, so I could install Android 6.0 from OTA update. I did not flash a custom ROM, because CyanogenMod did not have a stable release for XT1078 then, and it stil does not have at the time I write this. So this file helped me to revert my XT1078 to stock.
But I did not use any script. It's just how I choose to do it, I'd rather know what's going on in every step instead of let a script do things for me. I extracted the file XT1078_THEA_RETBR_DS_5.0.2_LXB22.99-24.12_cid12_subsidy-DEFAULT_CFC.xml.zip, and moved the required files to the folder platform-tools on Android SDK. Then these are the commands I used:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot reboot
After reboot, OTA update with Android 6.0 worked flawlessly.

I think you may want MM6.0 clean flash whitout any ota mess -> http://www.filefactory.com/file/2rw...MPB24.65-34_cid12_subsidy-DEFAULT_CFC.xml.zip
This is the MM 6.0 complete image, flash it as tatianes told you, but i would like to sugget the use of mfastbotv2 instead of fastboot
Flash like this
mfastboot flash partition gpt.bin
mfastboot flash bootloader bootloader.img
mfastboot flash logo logo.bin
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash system system.img_sparsechunk.0
mfastboot flash system system.img_sparsechunk.1
mfastboot flash system system.img_sparsechunk.2
mfastboot flash system system.img_sparsechunk.3
mfastboot flash system system.img_sparsechunk.4
mfastboot flash system system.img_sparsechunk.5
mfastboot flash modem NON-HLOS.bin
mfastboot erase modemst1
mfastboot erase modemst2
mfastboot flash fsg fsg.mbn
mfastboot erase cache
mfastboot erase userdata
mfastboot reboot
Click to expand...
Click to collapse
Just remeber to doublecheck the numbers of systeam sparse file, if your rom have 0 to 7, ou will have to add those

Am i understand?
So, let me see if i understand:
I extract the zip with the rom in the same folder of fastboot (or mfastboot) then, after (double) check the numbers of system sparse file, i'll do this commands?
There is no "collateral effects"?
(I'm asking 'cause I've tried this, boot on a lollipop, and when i tried to reboot, the phone bricked)
Does anybody tried to do this from Cyano?

Android OS gone, unable to mount any partition, etc. Need help.

So I don't know what to do at this point. I will try to provide as much info as I can for you guys to help me out. I bought the Verizon 2014 Moto X variant off Swappa new. The phone was new, but old. It was manufactured in 2014 and upon first boot, it still had KitKat installed. I OTA'd all the updates before unlocking the bootloader from Motorola's website. After unlocking the bootloader, I tried flash TWRP recovery via fastboot. It didn't work - I got a pink message line on the output that I don't remember what it said. I read that there were some issues installing recovery for VZW (?) so using flashify was my other option. So I then rooted the phone and used flashify to install TWRP. It worked. After that, I flashed a 2014 MM Pure Edition rom. It booted fine, but no signal. Yes, I forgot that it doesn't support CDMA, so I then went tried to flash CM13. Today, I started experiencing battery drain on radio and wifi so I tried to flash the official firmware of 5.1 VZW Victara variant. Fastboot and drivers are running fine and fastboot recognizes the phone. So I flashed everything, booted up, and...nothing. Every time I tried to reflash the firmware, I boot to a blinking No Command dead andy screen. Guess recovery wasn't installed? It just kept bootlooping. Out of desperation, I went to see if TWRP worked - it did. Now I ADB pushed the CM13 rom files on my phone to flash. Unfortunately, every time I try to flash anything, every partition is unable to be mounted. I can't factory reset, flash, nothing. Every time I try to wipe, one of the errors is, 'Failed to mount '/data' (Invalid Argument)'. Now at this point, this is where I'm stuck. I still have the bootloader/fastboot, a recovery, but no OS and I can't flash anything. Fastbooting the firmwares won't go through to boot. Can anyone help me on this? I will provide answers to any questions you have. Thanks.
EDIT: I tried to turn off the phone to prevent the phone from dying but I can't even do that. Tried to turn it off via TWRP but it just reboots to TWRP. I have to keep it plugged in. Sigh.

DroidOnRoids said:
So I don't know what to do at this point. I will try to provide as much info as I can for you guys to help me out. I bought the Verizon 2014 Moto X variant off Swappa new. The phone was new, but old. It was manufactured in 2014 and upon first boot, it still had KitKat installed. I OTA'd all the updates before unlocking the bootloader from Motorola's website. After unlocking the bootloader, I tried flash TWRP recovery via fastboot. It didn't work - I got a pink message line on the output that I don't remember what it said. I read that there were some issues installing recovery for VZW (?) so using flashify was my other option. So I then rooted the phone and used flashify to install TWRP. It worked. After that, I flashed a 2014 MM Pure Edition rom. It booted fine, but no signal. Yes, I forgot that it doesn't support CDMA, so I then went tried to flash CM13. Today, I started experiencing battery drain on radio and wifi so I tried to flash the official firmware of 5.1 VZW Victara variant. Fastboot and drivers are running fine and fastboot recognizes the phone. So I flashed everything, booted up, and...nothing. Every time I tried to reflash the firmware, I boot to a blinking No Command dead andy screen. Guess recovery wasn't installed? It just kept bootlooping. Out of desperation, I went to see if TWRP worked - it did. Now I ADB pushed the CM13 rom files on my phone to flash. Unfortunately, every time I try to flash anything, every partition is unable to be mounted. I can't factory reset, flash, nothing. Every time I try to wipe, one of the errors is, 'Failed to mount '/data' (Invalid Argument)'. Now at this point, this is where I'm stuck. I still have the bootloader/fastboot, a recovery, but no OS and I can't flash anything. Fastbooting the firmwares won't go through to boot. Can anyone help me on this? I will provide answers to any questions you have. Thanks.
EDIT: I tried to turn off the phone to prevent the phone from dying but I can't even do that. Tried to turn it off via TWRP but it just reboots to TWRP. I have to keep it plugged in. Sigh.
Click to expand...
Click to collapse
So you have the full stock firmware 5.1 for Verizon XT1096, like the one here:
https://mega.nz/#F!ow8igZRL!Z7vmN8GOpez2bVMYDvEKkg
Can you try:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
TWRP 3.0 seems to be causing problems, maybe corrupting partitions, stick to 2.8.7.1 or earlier.
http://www.invisiblek.org/
Maybe we can try RSD Lite...

Gus Ghanem said:
So you have the full stock firmware 5.1 for Verizon XT1096, like the one here:
https://mega.nz/#F!ow8igZRL!Z7vmN8GOpez2bVMYDvEKkg
Can you try:
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
TWRP 3.0 seems to be causing problems, maybe corrupting partitions, stick to 2.8.7.1 or earlier.
http://www.invisiblek.org/
Maybe we can try RSD Lite...
Click to expand...
Click to collapse
I did not get the file from there, but instead got it from AFH. As for the 2 fastboot commands, what should I do with them? They flashed fine when I was putting them in fastboot earlier. As for TWRP, I will flash to 2.8.7.1.
As for RSD Lite, I am running Windows 10 and several versions I have tried will not recognize the phone at all. I'm 95% sure the drivers are in OK status and I am using the OEM cable.

DroidOnRoids said:
I did not get the file from there, but instead got it from AFH. As for the 2 fastboot commands, what should I do with them? They flashed fine when I was putting them in fastboot earlier. As for TWRP, I will flash to 2.8.7.1.
As for RSD Lite, I am running Windows 10 and several versions I have tried will not recognize the phone at all. I'm 95% sure the drivers are in OK status and I am using the OEM cable.
Click to expand...
Click to collapse
I downloaded your firmware just to check the number of files, and the flashfile.xml, and it's exactly like this:
VICTARA_VERIZON_XT1096_5.1_LPE23.32-25-5_cid2_CFC.xml
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot

Gus Ghanem said:
I downloaded your firmware just to check the number of files, and the flashfile.xml, and it's exactly like this:
VICTARA_VERIZON_XT1096_5.1_LPE23.32-25-5_cid2_CFC.xml
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash motoboot motoboot.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
I appreciate you providing help so far. I downloaded the firmware you linked, fastbooted line for line, rebooted, bootloader unlock warning pops up, then the next boot sequence is just the blinking dead andy No Command logo that looks like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm still stuck. I'm going to flash the 2.x.x TWRP version again. But that's all I'll be able to get right now. Still not able to get an OS installed.

DroidOnRoids said:
I appreciate you providing help so far. I downloaded the firmware you linked, fastbooted line for line, rebooted, bootloader unlock warning pops up, then the next boot sequence is just the blinking dead andy No Command logo that looks like this:
I'm still stuck. I'm going to flash the 2.x.x TWRP version again. But that's all I'll be able to get right now. Still not able to get an OS installed.
Click to expand...
Click to collapse
Any errors on the phone during fastbooting firmware files, like "downgrading" etc.
I hope TWRP 2.x will allow you to flash CM.

UPDATE: So I made a little progress. There was a problem mounting and this thread helped with that: http://forum.xda-developers.com/showthread.php?t=2683787
Now I can wipe data, factory reset, flash, etc. in TWRP v2.8.7.1. But when I flash a rom, I reboot system and it boots back to recovery. WTF. Ugh.
EDIT 2: Sad news. Based off this thread, http://forum.xda-developers.com/moto-x-2014/general/warning-downgrade-bootloader-partition-t3105147, looks like I FUBAR'd the phone. Unfortunate that this phone isn't like a Nexus.

its the phone will reboot back to TWRP event you restore backup file on TWRP ?
did you try flash custom rom from TWRP?
---------- Post added at 05:33 PM ---------- Previous post was at 05:32 PM ----------
DroidOnRoids said:
UPDATE: So I made a little progress. There was a problem mounting and this thread helped with that: http://forum.xda-developers.com/showthread.php?t=2683787
Now I can wipe data, factory reset, flash, etc. in TWRP v2.8.7.1. But when I flash a rom, I reboot system and it boots back to recovery. WTF. Ugh.
EDIT 2: Sad news. Based off this thread, http://forum.xda-developers.com/moto-x-2014/general/warning-downgrade-bootloader-partition-t3105147, looks like I FUBAR'd the phone. Unfortunate that this phone isn't like a Nexus.
Click to expand...
Click to collapse
its the phone will reboot back to TWRP event you restore backup file on TWRP ?
did you try flash custom rom from TWRP?