First of all i want to make sure one thing to all the developers and users in this forum. I am not the developer of this rom. I am just sharing the work of a Great Developer. So i request everyone not to use any feature of this rom in yours. If you want to, then please ask proper permissions from the actual developer and give proper credits. Please must follow this
CAUTION: I will not be responsible for anything that will happen to your device while flashing or using this rom. Not even the developers too. You are solely responsible for everything that will happen to your device while using this ROM. Mind that Dudes
READ THIS FIRST
1. I am sharing this work here from some other forum with the permission of the developer.
2. So please don't ask for ETA's of updates.
3. If any one facing any new bug, please report here, but don't ask questions like "when it will be solved"?
4. It will be notified to the developer and it will be resolved off gradually.:good::good:
5. Don't use Harsh Language while posting in the comment sections.
Prerequisites:
1. You Must have the Stock Kitkat 4.4.2 in your phone before flashing this.
2. You must have the CWM recovery/Philz Recovery installed in your phone (Highly Recommended)
ROM FEATURES
1. Multiwindow
2. UPSM Mode
3. Private Mode
4. Toolbox
5. Statusbar Settings
6. Advanced Power-Off Settings
7. Animation Settings
8. Dynamic Statusbar
9. One Handed Operation
10. Circle Sidebar
11. Gesture Anywhere
12. Guest Mode
13. USB Fast Charge Support
14. Themes Support and So On........
Installation Instructions
1. First download the Firmware Package from below links.
For GT I9192 Users: https://yadi.sk/d/FwwmUW6knq3rS
For GT I9190 Users: https://yadi.sk/d/8M2V0av6npiug
For GT I9195 Users: https://yadi.sk/d/cl2m5Ujtnpisi
2. Flash the above firmware through ODIN. Complete the setup
3. Then download the following ROM file...
MOD EDIT
Links removed for containing warez
4. Download the rom from above link. Put it in your sdcard and flash via recovery.
5. The GT I9190 users can flash the rom and reboot the phone. No fixes are needed.
6. For GT I9192 and GT I9195 users, download the following corresponding fixes and place it in sdcard along with the Rom file. Flash the fix immediately after flashing the rom and then reboot. otherwise you may results in bootlop.
For GT I9192 Users: https://yadi.sk/d/QGSI0M8ioXyxe
For GT I9195 Users: https://yadi.sk/d/9P-gP3MPoXyzL
7. That's it..!!!!!
Post installation instructions
1. After flashing the ROM and fixes. No setup screen will come and dont get panic.
2. Also the phone language will be in Russian or serbian i think. Don't panic for that too.
3. Just go to settings (language is not needed for to select settings lol) and look for the language and input option...you can easily find it out. Or other wise check the screenshots. And in that you can see the option for language change. Change it to whichever language you want and phone will gets rebooted. Then you can enjoy all the features of the ROM..
4. Attached the screenshots in post #2.
Updates
Update 5.2.2
[/COLOR]
Update 5.3
http://forum.xda-developers.com/showpost.php?p=66420894&postcount=112
Download the above updates and flash through recovery. That's it...[/FONT]
Bugs
1. The GT I9192 users will not be able to see, in which sim they had received the calls in the call logs menu. To solve this problem, use "Zero Dialer" app from the playstore, it'll show you the sim numbers of the calls received.
2. Apps which has the drop down menu option will force closes whenever you press it. (mostly the payment apps only. The solution to this is you can use browser (instead of the app) for that :laugh::laugh::laugh
3. For GT I9192 users, system ui fc occurs if you make calls with the Heads Up option enabled. So don't use that
Miscellaneous Downloads/Fixes
S Planner Fix:: https://yadi.sk/d/F6RCXEfor6JLs
Highly Debloated Stock KK Firmware [GT I9192 only]: https://www.androidfilehost.com/?fid=23991606952601631
Alexax66 Kernel v0.1.2 for proper working of Init.d [for I9192 only]: https://yadi.sk/d/ZrbLcaxLprxiF
Smart manager Zip : https://yadi.sk/d/wRM32G-2nxvw2
Google Contacts and Calender Sync : https://yadi.sk/d/STiGJ3aFkTwjo
Kids Mode Zip: https://yadi.sk/d/D06Jn5Btee3G3 [This kids mode is having some problems, some force closes will occurs, so try this only you need this badly!!!!!!!]
Fantastic Audio Mod
http://forum.xda-developers.com/showpost.php?p=66441061&postcount=121 [Recommended only for music hearing geeks]
For themes: Go to the following link and download the theme packages and flash it through Recovery
http://forum.xda-developers.com/galaxy-s4-mini/themes-apps/theme-collection-theme-chooser-t3060241
For Fonts: Go to the following link, download the Samsungsans apk file and replace it with the original one in the system/app folder
http://forum.xda-developers.com/galaxy-s4-mini/themes-apps/fonts-styles-4-mini-t3119509
(also attached the CWM Recovery files for GT I9192 Only in post #3)
CREDITS
*Ploiki
*Chernoknijnik
*Narkoman88
Additional Credits
"Alexax66" for the Kernel
"Unknown 'VK Forum' Friends" for Additional files and YandexDisk Links
"Silviumik" for the Debloated Stock Firmware for Duos Version
"Fanion" for the themes
"Petravergil" for the fonts
"ruhul5" for the Google Drive Link
"yogi78" for checking the kernel and private mode for Duos Version
"syednawaz" for helping out the GT I9190 users
and most importantly "The XDA Community"
Update 5.3
http://forum.xda-developers.com/showpost.php?p=66420894&postcount=112
Download the above updates and flash through recovery. That's it...[/FONT][/SIZE]
Bugs
1. The GT I9192 users will not be able to see, in which sim they had received the calls in the call logs menu. To solve this problem, use "Zero Dialer" app from the playstore, it'll show you the sim numbers of the calls received.
2. Apps which has the drop down menu option will force closes whenever you press it. (mostly the payment apps only. The solution to this is you can use browser (instead of the app) for that :laugh::laugh::laugh
3. For GT I9192 users, system ui fc occurs if you make calls with the Heads Up option enabled. So don't use that
Miscellaneous Downloads/Fixes
S Planner Fix:: https://yadi.sk/d/F6RCXEfor6JLs
Highly Debloated Stock KK Firmware [GT I9192 only]: https://www.androidfilehost.com/?fid=23991606952601631
Alexax66 Kernel v0.1.2 for proper working of Init.d [for I9192 only]: https://yadi.sk/d/ZrbLcaxLprxiF
Smart manager Zip : https://yadi.sk/d/wRM32G-2nxvw2
Google Contacts and Calender Sync : https://yadi.sk/d/STiGJ3aFkTwjo
Kids Mode Zip: https://yadi.sk/d/D06Jn5Btee3G3 [This kids mode is having some problems, some force closes will occurs, so try this only you need this badly!!!!!!!]
Fantastic Audio Mod
http://forum.xda-developers.com/showpost.php?p=66441061&postcount=121 [Recommended only for music hearing geeks]
For themes: Go to the following link and download the theme packages and flash it through Recovery
http://forum.xda-developers.com/galaxy-s4-mini/themes-apps/theme-collection-theme-chooser-t3060241
For Fonts: Go to the following link, download the Samsungsans apk file and replace it with the original one in the system/app folder
http://forum.xda-developers.com/galaxy-s4-mini/themes-apps/fonts-styles-4-mini-t3119509
(also attached the CWM Recovery files for GT I9192 Only in post #3)
CREDITS
*Ploiki
*Chernoknijnik
*Narkoman88
Additional Credits
"Alexax66" for the Kernel
"Unknown 'VK Forum' Friends" for Additional files and YandexDisk Links
"Silviumik" for the Debloated Stock Firmware for Duos Version
"Fanion" for the themes
"Petravergil" for the fonts
"ruhul5" for the Google Drive Link
"yogi78" for checking the kernel and private mode for Duos Version
"syednawaz" for helping out the GT I9190 users
and most importantly "The XDA Community"
To change Language
To change the language after setup see the following screenshots...
CWM Recovery for Duos Users
Flash Via Odin
More Screenshots
there is a problem in power menu doesn't appear
Mo7amed_Gom3a said:
there is a problem in power menu doesn't appear
Click to expand...
Click to collapse
Activate the developer option, go to that and in the last you will see an option called "advanced system settings".
In that, you will see an option with the name "Power off button setting". There you will have all the options for the power menu..
Do not install this !! Its full of viruses and adds !!!! Once you installed you can't uninstall the adds and viruses !!
djares21 said:
Do not install this !! Its full of viruses and adds !!!! Once you installed you can't uninstall the adds and viruses !!
Click to expand...
Click to collapse
Viruses and adds?!?!?!?!
I don't understand.....
You talking about the stagefright bug?!?!?!
Sent 4m My S4 Mini Duos with S5 "STE" Rom by PLOIKI
djares21 said:
Do not install this !! Its full of viruses and adds !!!! Once you installed you can't uninstall the adds and viruses !!
Click to expand...
Click to collapse
Also what you mean by, "Once you installed you can't uninstall the adds and viruses?" LOL....Its funny....
Because for the past 2 weeks i am using this rom and before that also i used this and i changed to CM 13 and some other MM ports for short time. No problems arised while changing....
Now due to some reasons, i revert back to this.... And moreover some of the users here personally contacted me to give the links of this rom. That's why i created this thread....
And one more thing i am not making any fun of you. But i want you to make clear about the "Viruses and Adds" thing??!!!!!
Was really looking forward to trying it out, what viruses :crying:
Init.d will force close
Hi
If u get Init.d will force close use this kernel Alexax66 0.1.2 for I9192
Hello there. my phone never had kitkat officially so i am using s6&N5 port(which is 4.4).
do i still have to download I9190XXUCOC1_SER.zip? or can i directly flash S5_STE_Rom_v.5.2.1.zip.
because i heard kitkat update bootloader and i do not want my bootloader to be updated as i may want to go for jelly bean.
btw i updated s6 port(kitkat) from NEW S6 n N5 Project thread from jellybean. and worked fine.
okay i flashed it over s6 port(4.4.4). but i got random restarts. then i went in twrp recovery and wiped everything and freshed install only flash S5_STE_Rom_v.5.2.1.zip file. still crashed. i guess i have to follow your instruction but as i said i cant install kitkat stock firmware as it may update the bootloader.
syednawaz said:
okay i flashed it over s6 port(4.4.4). but i got random restarts. then i went in twrp recovery and wiped everything and freshed install only flash S5_STE_Rom_v.5.2.1.zip file. still crashed. i guess i have to follow your instruction but as i said i cant install kitkat stock firmware as it may update the bootloader.
Click to expand...
Click to collapse
You can remove the bootloader files from the stockfirmware.tar file using total commander and flash the firmware
Sent from my ASUS_T00J using XDA Free mobile app
DarkFrenzy said:
You can remove the bootloader files from the stockfirmware.tar file using total commander and flash the firmware
Sent from my ASUS_T00J using XDA Free mobile app
Click to expand...
Click to collapse
little bit more help please. How to do it? which file to delete? and total commander for pc right?
syednawaz said:
little bit more help please. How to do it? which file to delete? and total commander for pc right?
Click to expand...
Click to collapse
Here is a tutorial
http://www.s4miniarchive.com/2013/12/how-to-remove-knox-bootloader-from-new.html?m=1
Rename .tar.md5 to .tar and open using total commander and just
Just remove everything except system.img and boot.img
Then flash from odin
Sent from my ASUS_T00J using XDA Free mobile app
DarkFrenzy said:
Here is a tutorial
http://www.s4miniarchive.com/2013/12/how-to-remove-knox-bootloader-from-new.html?m=1
Rename .tar.md5 to .tar and open using total commander and just
Just remove everything except system.img and boot.img
Then flash from odin
Sent from my ASUS_T00J using XDA Free mobile app
Click to expand...
Click to collapse
have you tried like that for kitkat? i do not want to brick my phone . but if you have tried it i will try as well.
syednawaz said:
have you tried like that for kitkat? i do not want to brick my phone . but if you have tried it i will try as well.
Click to expand...
Click to collapse
Yes i have tried that. U can also try. Just remove all the files except system.img and boot.img then flash then you will have the kitkat firmware installed then u need to flash this rom
Sent from my ASUS_T00J using XDA Free mobile app
after deleting files and then selecting it in odin i get md5 error, binary is invalid. any help plz
and that link is for linux, i do not understand it.
solved. by removing md5. now installing
syednawaz said:
after deleting files and then selecting it in odin i get md5 error, binary is invalid. any help plz
and that link is for linux, i do not understand it.
Click to expand...
Click to collapse
Remove .md5 the firmware should be in xxx.tar not xxx.tar.md5
Sent from my ASUS_T00J using XDA Free mobile app
Related
WARNING! ONLY USE THIS ON THE GT-I9192 MODEL!
Hello all S4 Mini owners!
I'm happy to finally release ClockworkMod recovery and an insecure kernel for the GT-I9192. With these two installed on your device, obtaining root is easy.
Attached to this post is the necessary files needed for this task. Download the following files:
Odin_v3.09.zip (if you don't have it already)
recovery-clockwork-6.0.5.1-serranodsdd.tar.zip
S4Mini_RootKit_v2.zip (contains SuperSU v1.89 and BusyBox v1.21.1)
Extract recovery-clockwork-6.0.5.1-serranodsdd.tar.zip file to your computer.
The procedure is as:
Copy the "S4Mini_RootKit_v2.zip" to your device SD card.
Turn off the phone.
Press and hold home, volume down and power. Download screen should appear.
Connect USB cable, and press volume up.
Start Odin, uncheck "F. Reset Time", and then click AP button.
Select "recovery-clockwork-6.0.5.1-serranodsdd.tar.md5" file that you previously extracted, and press Start button. The phone will reboot when finished.
After the phone resets (it vibrates) IMMEDIATELY hold volume up and home buttons to boot into recovery mode.
Select the option to install the ZIP file you have previously copied to your device and begin flashing it.
After flashing using CWM, reboot into system and enjoy your rooted device.
To get rid of the the warnings about applications doing not permitted actions, delete the following files from system/app, or let SuperSU fix it for you.
KNOXAgent.apk
KNOXStore.apk
ContainerAgent.apk
Link to a test build of CM 10.2 coming in a bit. Support for multi SIM support was merged into CM earlier, so I thought I'd put out a test build to let you guys test if it's working or not.
CM 10.2 test build: http://goo.im/devs/arco/serranodsub/cm-10.2-20131022-UNOFFICIAL-serranodsub.zip
You need to flash it with the recovery I posted in first post.
arco68 said:
CM 10.2 test build: http://goo.im/devs/arco/serranodsub/cm-10.2-20131022-UNOFFICIAL-serranodsub.zip
You need to flash it with the recovery I posted in first post.
Click to expand...
Click to collapse
Unfortunately, System UI has stopped.
Sim card also not found.
Difference with other rooting methods....???
arco68 said:
WARNING! ONLY USE THIS ON THE GT-I9192 MODEL!
Hello all S4 Mini owners!
I'm happy to finally release ClockworkMod recovery and an insecure kernel for the GT-I9192. With these two installed on your device, obtaining root is easy.
Attached to this post is the necessary files needed for this task. Download the following files:
Odin_v3.09.zip (if you don't have it already)
recovery-clockwork-6.0.4.4-serranodsub.tar.zip
S4Mini_RootKit_v1.zip (contains SuperSU v1.65 and BusyBox v1.21.1)
Extract recovery-clockwork-6.0.4.4-serranodsub.tar.zip file to your computer.
The procedure is as:
Copy the "S4Mini_RootKit_v1.zip" to your device SD card.
Turn off the phone.
Press and hold home, volume down and power. Download screen should appear.
Connect USB cable, and press volume up.
Start Odin, uncheck "F. Reset Time", and then click AP button.
Select "recovery-clockwork-6.0.4.4-serranodsub.tar.md5" file that you previously extracted, and press Start button. The phone will reboot when finished.
After the phone resets (it vibrates) IMMEDIATELY hold volume up and home buttons to boot into recovery mode.
Select the option to install the ZIP file you have previously copied to your device and begin flashing it.
After flashing using CWM, reboot into system and enjoy your rooted device.
To get rid of the the warnings about applications doing not permitted actions, delete the following files from system/app
KNOXAgent.apk
KNOXStore.apk
ContainerAgent.apk
Click to expand...
Click to collapse
Hi...
Appreciate your effort....!!
Could you please tell what is its difference from other rooting methods currently available in xda..??
Does it have BLN support...??
Awaiting your reply....
Thanx in advance.....
---------- Post added at 07:40 PM ---------- Previous post was at 07:10 PM ----------
Eagerly waiting for the working CM 10.2 Rom....!!
Please fix the errors and upload it s early as possible....!!
arco68 said:
CM 10.2 test build: http://goo.im/devs/arco/serranodsub/cm-10.2-20131022-UNOFFICIAL-serranodsub.zip
You need to flash it with the recovery I posted in first post.
Click to expand...
Click to collapse
Thank you, indeed, for all your efforts for i9192! Waiting for this fixed build, I'll test it as soon as you post it here.
I'll try this next week at home
Is this kernel for all regions?
Sent from my GT-I9192 using Tapatalk
Can you try adding the following to build.prop?
ro.telephony.ril.v3=qcomdsds
arco68 said:
Can you try adding the following to build.prop?
ro.telephony.ril.v3=qcomdsds
Click to expand...
Click to collapse
is it change samething?
Alexannino said:
is it change samething?
Click to expand...
Click to collapse
To see if it fixes the sim card not found issue. If not then I don't know what's wrong, as I don't have this phone myself so I can test. Could be that the multi sim stuff in 4.3 isn't compatible with the current drivers available for this phone, and in that case it won't be possible to have a working CM for it.
arco68 said:
Can you try adding the following to build.prop?
ro.telephony.ril.v3=qcomdsds
Click to expand...
Click to collapse
Could you rebuild ROM or create separate flashable zip for correct build.prop, please? Your recovery is incompatible with AROMA filemanager, cannot apply corrections after flashing ROM
Sent from my GT-I9195 using XDA Premium 4 mobile app
---------- Post added at 09:58 PM ---------- Previous post was at 09:53 PM ----------
Arco, the reason we cannot change props file from ROM itself is that device is stuck on welcome screen with SystemUI crash messages.
Sent from my Galaxy S4 Mini GT-I9192
Upd: Editing build.prop did not fix neither no sim/network message, nor systemui force close
Maybe there is something deeper than just drivers? Framework for them, for example? When running I9192 with I9195 ROM, systemui does not perform fc.
Weird. Try removing the following from build.prop. It should work in single sim card mode then.
Code:
# System prop to enable DSDS
persist.dsds.enabled=true
persist.multisim.config=dsds
# System prop for DSDS model *no binding subscription for QMI_WDS* message
persist.radio.dont_use_dsd=true
Is sim card and network working with the 9195 rom?
arco68 said:
Weird. Try removing the following from build.prop. It should work in single sim card mode then.
Code:
# System prop to enable DSDS
persist.dsds.enabled=true
persist.multisim.config=dsds
# System prop for DSDS model *no binding subscription for QMI_WDS* message
persist.radio.dont_use_dsd=true
Is sim card and network working with the 9195 rom?
Click to expand...
Click to collapse
I have to use my I9192 as primiary device on this weekend, so I will test it out after 27th.
Nope, no network (but no empty sim slot message) on official cm roms from I9190 and I9195.
Sent from my Galaxy S4 Mini GT-I9192
arco68 said:
WARNING! ONLY USE THIS ON THE GT-I9192 MODEL!
Hello all S4 Mini owners!
I'm happy to finally release ClockworkMod recovery and an insecure kernel for the GT-I9192. With these two installed on your device, obtaining root is easy.
Attached to this post is the necessary files needed for this task. Download the following files:
Odin_v3.09.zip (if you don't have it already)
recovery-clockwork-6.0.4.4-serranodsub.tar.zip
S4Mini_RootKit_v1.zip (contains SuperSU v1.65 and BusyBox v1.21.1)
Extract recovery-clockwork-6.0.4.4-serranodsub.tar.zip file to your computer.
The procedure is as:
Copy the "S4Mini_RootKit_v1.zip" to your device SD card.
Turn off the phone.
Press and hold home, volume down and power. Download screen should appear.
Connect USB cable, and press volume up.
Start Odin, uncheck "F. Reset Time", and then click AP button.
Select "recovery-clockwork-6.0.4.4-serranodsub.tar.md5" file that you previously extracted, and press Start button. The phone will reboot when finished.
After the phone resets (it vibrates) IMMEDIATELY hold volume up and home buttons to boot into recovery mode.
Select the option to install the ZIP file you have previously copied to your device and begin flashing it.
After flashing using CWM, reboot into system and enjoy your rooted device.
To get rid of the the warnings about applications doing not permitted actions, delete the following files from system/app
KNOXAgent.apk
KNOXStore.apk
ContainerAgent.apk
Click to expand...
Click to collapse
I am running I9192UBUAMH2.
I was able to flash the recovery you posted, however I can't enter on it with VOL UP+HOME+PWR. Simply got a blank screen and after some seconds the phone reboots normally...
Ops, my bad. I got it working...
Thanks!
Arco, i've tried to delete persist.dsds.enabled etc. strings, systemui works now, but no network. What exactly did you modify in this CM build? Any information helps
Sent from my Galaxy S4 Mini GT-I9192
Corias said:
Arco, i've tried to delete persist.dsds.enabled etc. strings, systemui works now, but no network. What exactly did you modify in this CM build? Any information helps
Sent from my Galaxy S4 Mini GT-I9192
Click to expand...
Click to collapse
Take a look here:
https://github.com/arco/android_device_samsung_serranodsub
https://github.com/arco/android_vendor_samsung_serranodsub
That should be all you need to build for the I9192. I'm not sure why network isn't working on this device, but it might be because the multi-sim for 4.3 that CM integrated doesn't work properly with the 4.2 libs from stock rom.
touch version
Hi,
is possible to realize the touch version of this recovery?
thanks
My co-worker...just got the samsung s 4 mini dous about a week ago (model number GT-I9192). I want to help her root...but her baseband and build number both end with "XXXUAMH2" and doesnt match the number shown on the first post of this thread. She has checked to see if there was a system update, but the phone says its up to date. Can her phone still be rooted using the file on this thread or do she need a new set of files? I have searched the form for rooting information for her phone...but all I see is info for the other models Ex. I9190 and I9195 etc....
Perhaps someone can point us in the right direction. any help would be appreciated. Thanks!
Yes you can root with this method but I suggest to flash stock kernel again after root
Sent from my GT-I9192 using Tapatalk
fburgos said:
Yes you can root with this method but I suggest to flash stock kernel again after root
Sent from my GT-I9192 using Tapatalk
Click to expand...
Click to collapse
Ok great...two things...
First: Where is the stock kernel link?
Second: Why would I need to flash it after?
Deodexed, debloated stok rom with supersu, busybox, xposed framework and updated minimal google apps.
Flash this rom with custom TWRP recovery FOR LOLLIPOP -> http://forum.xda-developers.com/grand-prime/development/custom-recovery-twrp-2-8-7-0for-lollipop-t3190351
Make sure you follow all the steps correctly:
1. download all files and put them on SD Card
2. boot into TWRP recovery
3. do a complete wipe (system, data, cache, internal storage)
4. first flash only G530fz_502_deodex_xposed.zip
5. when finished on the same screen WIPE CACHE
6. reboot to system and wait for rom to boot up, IT WILL LAST 10 MINUTES maybe more, it is normal for deodexed roms
7. once the language menu shows up you can reboot to recovery again
8. this time DO NOT wipe just flash xposed-v65-sdk21-arm-arter97-V5-generic[1].zip
9. DO NOT wipe cache and reboot to system
10. this time system boots faster but apps will be updated
11. when you complete setup first update SU binary in superuser app
12. install XposedInstaller_3.0_alpha4[1].apk and reboot
13. open Xposed app it should say framework is connected
14. optionally make a backup and enjoy your phone
DOWNLOAD G530FZ deodexed xposed rom
SCREENSHOTS (rom has stock settings and launcher. screenshots might look little different as I use dpi 220, navbar in build.prop and action launcher on my phone..)
If you like this, you can buy me a beer, thanks!
____
Base rom is http://www.sammobile.com/firmwares/download/54047/G530FZXXU1BOG2_G530FZOXA1BOG2_PHE/
Credits:
twrp recovery http://forum.xda-developers.com/grand-prime/development/custom-recovery-twrp-2-8-7-0for-lollipop-t3190351
xposed lollipop http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
deodexer - http://forum.xda-developers.com/android/software-hacking/script-app-joeldroid-lollipop-batch-t2980857
how to deodex - http://forum.xda-developers.com/sprint-galaxy-s5/general/how-to-deodex-lollipop-rom-t3065596
justarchi kitchen - https://github.com/JustArchi/ArchiKitchen
stericson -busybox
chainfire -supersu
If you are wondering what modules work, I attached wanam module for lollipop.
For status bar modding use http://repo.xposed.info/module/com.bocharov.xposed.fsbi, xstana isn't fully compatible with stock samsung lollipop roms.
Can i flash this rom on my galaxy grand prime model g530H...?
great jop >>> hope that it moded for g530h
Nasir javed said:
Can i flash this rom on my galaxy grand prime model g530H...?
Click to expand...
Click to collapse
zshou92 said:
great jop >>> hope that it moded for g530h
Click to expand...
Click to collapse
I don't think it will work, I will try to make rom for G530H later.
I just need these files from g530h running stock 5.0.2 rom and TWRP recovery:
/cache/recovery/last_log
and all files from these folders:
/system/app
/system/priv-app
/system/framework
also version number of stock rom that the phone is running or link to download from sammobile / samsung-updates sites
These files must be pulled with adb or file manager, I need files from rom that is in use, if I extract files from stock odin tar it might not work.
If someone can send me these files I will make you deodexed rom. :good:
hangy18 said:
I don't think it will work, I will try to make rom for G530H later.
I just need these files from g530h running stock 5.0.2 rom and TWRP recovery:
/cache/recovery/last_log
and all files from these folders:
/system/app
/system/priv-app
/system/framework
also version number of stock rom that the phone is running or link to download from sammobile / samsung-updates sites
These files must be pulled with adb or file manager, I need files from rom that is in use, if I extract files from stock odin tar it might not work.
If someone can send me these files I will make you deodexed rom. :good:
Click to expand...
Click to collapse
here's the last_log
http://www.datafilehost.com/d/35178a46
rom base
http://www.sammobile.com/firmwares/download/53879/G530HXCU1BOH3_G530HSER1BOH3_SER/
the apk's
http://www.mediafire.com/?d35x0z8187cch0r
pull from adb :
Thank you very much !!!
i'll try this night
Edit: Thank you it works perfectly on my G530FZ.
working well on my g530fz
What apps are removed? But great. Finaly some development for this phone!
pajocos said:
What apps are removed? But great. Finaly some development for this phone!
Click to expand...
Click to collapse
All Google apps except Google play, galaxy apps market and knox apps since it was disabled
pajocos said:
What apps are removed? But great. Finaly some development for this phone!
Click to expand...
Click to collapse
Pd.Chal said:
here's the last_log
http://www.datafilehost.com/d/35178a46
rom base
http://www.sammobile.com/firmwares/download/53879/G530HXCU1BOH3_G530HSER1BOH3_SER/
the apk's
http://www.mediafire.com/?d35x0z8187cch0r
pull from adb :
Click to expand...
Click to collapse
Thanks I will make rom for g530h during the weekend.
weather widget is missing. Is it suposed? I'm looking in system.rar that you uploaded but still didn't find him
Unfortunately nothing works for me
Probably it is caused by encrypted storage in my case but flashing TWRP via Odin leads to boot into black screen with coloured vertical strips but nothing else....flashing back PhilZ CWM works but using it for installation of this ROM doesn't work (as expected)...
So, what do you suggest? Flashing back Stock ROM (v4.4.4) and trying it again or is there anyone else with the same issues but with unencrypted phone?
Thx for your help,
x.
waiting for the 530H
Good day!
Let's make this happen! How can i help? I have G530H with XXU baseband.
Sent from my SM-G530H using XDA Free mobile app
ZenitramXdaDev said:
Let's make this happen! How can i help? I have G530H with XXU baseband.
Sent from my SM-G530H using XDA Free mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/grand-prime/development/mini-rom-deodex-apps-lollipop-5-0-2-t3194189 another user made it already
pajocos said:
weather widget is missing. Is it suposed? I'm looking in system.rar that you uploaded but still didn't find him
Click to expand...
Click to collapse
I may have deleted some more apps, there you go:
https://mega.nz/#!RVFDWDSD!_jTpUTYE5h9t07WGPphWoUTXIj-Z0fmv5YRnlxF5p94
i deleted the weather app
xkovi said:
Unfortunately nothing works for me
So, what do you suggest? Flashing back Stock ROM (v4.4.4) and trying it again or is there anyone else with the same issues but with unencrypted phone?
Click to expand...
Click to collapse
I don't have any knowledge of encryption in android, try searching xda forums for more advice, but I think such features were designed to be used with stock system and recovery. Also samsung KNOX is disabled in this rom but I am not sure if it affects device encryption in any way.
Pd.Chal said:
here's the last_log
http://www.datafilehost.com/d/35178a46
rom base
http://www.sammobile.com/firmwares/download/53879/G530HXCU1BOH3_G530HSER1BOH3_SER/
the apk's
http://www.mediafire.com/?d35x0z8187cch0r
pull from adb :
Click to expand...
Click to collapse
Hi, is this rom working http://forum.xda-developers.com/grand-prime/development/mini-rom-deodex-apps-lollipop-5-0-2-t3194189 ?
I am not sure if version for g530h is still needed.
Let me know.
Thanks
UPDATED
Since these issues have been fixed in newer builds but as a s2 hd lte users, we have no option but to use older builds which have many issues. I found a workaround for them. If you are having wifi or other radio related issues, contact the ROM developer. This post can't help you. Flashing latest baseband helped me and could work well for you as well. Lets talk about two of the most common bug that haunts our device
1 Apps auto closing->( only for LMY48G builds,if you have newer builds,just flash gapps and reboot. to check go to about phone-> build number)
This is a webview related bug.
Download latest gapps from opengapps.org.
I prefer aroma installer as smaller packages don't have webview included,which will make the bugs worse.
Flash gapps. Dont forget to select 'android system webview' from the aroma installer.
Download the zip file from the
link
https://mega.nz/#!0d5Tiaja
Decryption key !JAG5Im-T75YN1CKIOiOcyDDaBH2ILD6dzwxw4xnhrBc
Extract "libwebviewchromium.so" and "libwebviewchromium_plat_support.so"
It is taken from stock samsung ROM and only works on armv7 devices.
Copy them to /system/libs using ESfile explorer or any other root explorer.
Overwrite the original file if asked.
give permission (-rw-r-r) to both file
Reboot to recovery
Flash this file "cm12.1 android system webview" from this thread(only for cm12.1, will cause bootloops in Xenon hd and resurrection remix)
http://forum.xda-developers.com/xperia-m/themes-apps/mod-google-android-webview-t3109216
Apps will now no longer auto close in your face without warning
((-> After testing for a month, I concluded that these steps are optional and use only if you want to have google android webview instead of cm12.1's built in 'android system webview'))
2) Now the most important part, random reboots.
This was reported on earlier builds of lollipop by many users.This is mostly caused by minfree that android uses to manage memory. If you navigate to sys/modules/lowmwemorykiller/parameters you can see 4 or 5 files. two of those files have wrong permissions. They are "adj" and "minfree".
If you give them (rw-r-r) permissions, you can adjust minfree values. the stock values are too aggressive and would cause constant reboots, freezes. Download romtoolbox, navigate to task manager, swipe left. you can choose to use any presets. i use 8,12,24,60,70,80 as minfree values.
Dont check "auto apply on boot" because you need to repeat this whole process after a reboot as those two files"adj and minfree" will be replaced from boot.img on boot by kern
Permanent fix: unpack boot.img. Navigate to ramdisc and open init.rc file in notepad. Find the line
chmod 0220 /sys/module/lowmemorykiller/parameters/minfree
chmod 0220 /sys/module/lowmemorykiller/parameters/adj
Change both values to 0644
save and close
Repack boot.img
Put it back inside the zipfile using winrar or use flashify from playstore to update boot.
I found tool to unpack qualcomm boot.img from this website. Full credits to the developer who made this tool.
http://www.droidbeep.com/how-to-unpa...-img-qualcomm/
download ROM toolbox and apply your preferred values
3. Low storage and optimizing apps(configuring ART compiler)
After google updated android runtime from JIT to ART, apps take up huge space and "optimizing app" takes forever. But there is workaround for that too.
1)Open build.prop in any text editor.
2) find these two lines:
dalvik.vm.image-dex2oat-filter=........(blah blah)
dalvik.vm.dex2oat-filter=...(blah blah)
3) Change both of these lines to
dalvik.vm.image-dex2oat-filter=speed
dalvik.vm.dex2oat-filter=Verify-none
If these lines doesn't exist, in your build.prop,you have to add them manually
4) save your build.prop file
5) reboot to recovery and wipe dalvik cache
After this check your storage space, You will have plenty of storage left and optimizing apps should be faster. It works just like old JIT compiler from older android versions.
if this doesn't work for you, you have to edit these same lines from default.prop by unpacking boot.img
I have fixed this issue by editing init.rc inside boot.img, but i dont know if i should post it here or not.
diabolicalprophecy said:
I have fixed this issue by editing init.rc inside boot.img, but i dont know if i should post it here or not.
Click to expand...
Click to collapse
please, for e120s
OIAUser said:
please, for e120s
Click to expand...
Click to collapse
Please extract Boot.img from the zip file and send it. I don't have boot.img for e120s, or i can tell you how to do it yourself if you are interested.
Tell me how, I'll try to do it myself.
I will be very grateful
any way to fix wifi & soft reboot on e120s ???
if you need log or any thign about my devices i will link it to you!!
OIAUser said:
Tell me how, I'll try to do it myself.
I will be very grateful
Click to expand...
Click to collapse
I have updated the post on how to do it. You can find the required tool here with detailed instructions
http://www.droidbeep.com/how-to-unpack-and-repack-boot-img-qualcomm/
kdlinh said:
any way to fix wifi & soft reboot on e120s ???
if you need log or any thign about my devices i will link it to you!!
Click to expand...
Click to collapse
You can try wiping phone efs through odin in order to fix radio issues
1 Download stock jb rom
2 Check "phone efs clear". This is most important.
3 Click pda
4 click start
5 wait for phone to boot up
6 go to settings->software update to check if you are running latest jb build. Soft reboots and radio issues are usually caused by old baseband version.
7 Proceed with usual old way to install lollipop.
This way odin will wipe your efs settings to rebuild from scratch.
still ploblem ??? :? wait how to clear efs
at first time i have checked this box but failded ,
kdlinh said:
still ploblem ??? :? wait how to clear efs
at first time i have checked this box but failded ,
Click to expand...
Click to collapse
you need Stock jb rom to do this. I also had this issue in e120l, but clearing phone efs fixed radio issues for me. you need odin3v 1.85 and samsung usb drivers.
You can find it alongside " phone bootloader update". Be careful not to select this one by accident.
diabolicalprophecy said:
you need Stock jb rom to do this. I also had this issue in e120l, but clearing phone efs fixed radio issues for me. you need odin3v 1.85 and samsung usb drivers.
You can find it alongside " phone bootloader update". Be careful not to select this one by accident.
Click to expand...
Click to collapse
i have checked this efs box but failed :crying::crying:
kdlinh said:
i have checked this efs box but failed :crying::crying:
Click to expand...
Click to collapse
which firmware did you tried this with? i have no problem doing this with astap 8 or stock jb rom for e120l.
http://i4khmers.blogspot.com/2015/09/official-firmware-samsung-galaxy-sii.html try this
its E120SKSJMH3 version
Once again, I read the instructions .. understand. But in the archive libraries are no libvebvievhromium .so file. "There's a file" libwebviewchromium_loader. "This is critical?
OIAUser said:
Once again, I read the instructions .. understand. But in the archive libraries are no libvebvievhromium .so file. "There's a file" libwebviewchromium_loader. "This is critical?
Click to expand...
Click to collapse
you get "libWebviechromium .so" file while installing gapps package. Go to opengapps.org and download aroma installer.
there are two files in the archive i uploaded, libwebviwechromium_loader.so and libwebviewplatsupport.so. You need to extract and replace those files in system-> libs after flashing gapps package. The built in webview will cause random apps shutdowns. this file is critical. You need libwebviewchromium_loader to start webview app. your system will not function properly without it.
diabolicalprophecy said:
which firmware did you tried this with? i have no problem doing this with astap 8 or stock jb rom for e120l.
http://i4khmers.blogspot.com/2015/09/official-firmware-samsung-galaxy-sii.html try this
its E120SKSJMH3 version
Click to expand...
Click to collapse
failed it still this error it seems like i stuck , have at least one error when i up rom to an open source cook rom
kdlinh said:
failed it still this error it seems like i stuck , have at least one error when i up rom to an open source cook rom
Click to expand...
Click to collapse
have you checked debugging option from developer options before doing this? Make sure your data cable is not faulty. please make sure you have a backup of efs partition if you are having network issues with all ROMs. try hellcat and stock based roms for testing to make sure you are not having this issue only on lollipop or kitkat. Also try to wipe boot from recovery menu before flashing.
diabolicalprophecy said:
have you checked debugging option from developer options before doing this? Make sure your data cable is not faulty. please make sure you have a backup of efs partition if you are having network issues with all ROMs. try hellcat and stock based roms for testing to make sure you are not having this issue only on lollipop or kitkat. Also try to wipe boot from recovery menu before flashing.
Click to expand...
Click to collapse
i means that when i up the stock based roms none of error found but when i up rom to cm11 cm10 hellkat miui cm12 & ressuction
ERROR at least found one in this open source rom
kdlinh said:
i means that when i up the stock based roms none of error found but when i up rom to cm11 cm10 hellkat miui cm12 & ressuction
ERROR at least found one in this open source rom
Click to expand...
Click to collapse
I also had this the same issue.
There is a link to latest baseband in hellkat thread. Thats where i got it. Sadly Its only for E120L
Search the hellkat thread to see if there is one for e120s as well.
I obviously didn't look further as i don't own e120s.
diabolicalprophecy said:
I also had this the same issue.
There is a link to latest baseband in hellkat thread. Thats where i got it. Sadly Its only for E120L
Search the hellkat thread to see if there is one for e120s as well.
I obviously didn't look further as i don't own e120s.
Click to expand...
Click to collapse
can you give me the links , at least what i can do now is tried to install your baseband
it will brick your phone. Its for E120L only
Dualboot patcher 101
Device : Galaxy Note 4
Difficulty level : Easy
This is a full guide to understand and use Dualboot Patcher App
Download latest app snapshot from : Noobdev
Files » DualBootPatcherAndroid-9.1.0.r80.gd5920b2-snapshot.apk
Latest as of Jan 8 2017
Install it like a normal apk
Dualbooting begins here ---
Main things to do are
Setup Dualboot boot enviroment
Setup Dualboot files
Flashing
Switch between roms
App sharing
Part 1
Setting up for first time use
-Open dualboot patcher app and do the following
-Go to Roms tab then click the 3 dot menu on "Primary"
-Press Set Kernel {if it didnt ask you at the beginning}
-Then press "Update RamDisk"
Part 2
Patching Files for dualboot
-Download the rom you want to dualboot / any mods for it / xposed or whatever flashableZIP you want to install on your secondary rom
-Go to "Patch Zip File" Press the + and click "Add Flashable Zip"
-Select your ROM Zip
-Select your Device (Trelte For exynos or Trlte For Snapdragon)
-Select "Data slot" in Partition Configuration
-The ID is your parition name , basicly SAME ID for zips = Same flash location, Type rom1 for example [No caps]
-Do the same for any other zips (making sure the ID is the excat same)
Part 3
Flashing
Once you are done patching files , you will end up with a duplicate collection of your original files, but they end with _data-slot-[ID].zip suffix
-Grab those files and go flash them in your recovery
-in the recovery screen you will see [Multiboot] prefix behind most scripts, that means you are flashing a patched zip
-Once you are done flashing just hit reboot from the recovery
Part 4
Switching
You will be greated with your new rom , do the first setup and you are now running your secondary rom
Now, to switch roms do the following
-Install your dualboot patcher app on your secondary rom
-Open it and go to "Roms" Section
-Suprise, you will see Primary and below it [ID] (Data Slot)
-Press the primary and reboot , thats it
Part 5
App Sharing
Lets say you want your app data to be available on all your roms , Whatsapp data , telegram data , game data etc
-Open the app on your primary rom , go to "App Sharing" Section and enable " Share Individual applications"
-Press "manage shared applications"
-Click on an app "whatsapp for example"
-Tick "Use shared data"
-Hit ok then Then go back after selecting all your apps
-It must show a toast saying "The changes will take effect next reboot"
-Reboot your device to the secondary rom and do the same thing for the same apps
App data is now shared across both roms,
F.A.Q please read before attempting this
1- Faild to set kernel due to unrecognized device
-Common issue with custom roms, you can fix it by editing your Buid.prop , changing device name , code etc and ro.patcher
2- Flashing files via recovery , will it affect my primary rom ?
- No , all the files are directed to your new rom enviroment , the only things that can affect dualboot is kernel changes
3- How to change primary / secondary kernel ?
-To change primary , just flash the new kernel , then follow " Part 1 " of the guide again
-To Change Secondary , Follow " Part 2 " of the guide to patch the Kernel zip then flash in recovery
4- Where are the files located ?
-your secondary system can be found under /data/multiboot/data-slot[ID]/System (only seen when you are using primary rom or Recovery file manager)
-Your shared app data can be found under /data/multiboot/_Appsharing
5- Enabling app sharing, my data for the app is gone.
-When you enable app sharing it changes the data location, so whatever data you had need to be moved with it, best thing to do is to backup the app you want to share with titaniumbackup (before enabling shared data for it) then restore it when you enable data sharing and rebooting
6- How many roms can i "dualboot"
-As much as you like aslong as you have storage in your data partition i had 4 roms dualbooted at one point
7- How much storage does it consume ?
-CM roms are usually around 1GB for system + few GBs for data (total of 3GB-4GB For normal user with some apps)
-TW roms are heavier around 2-3GB for system (most bloated AF roms) and same for data
8- My secondary rom broke due to a mod or something, how can i switch roms in recovery ?
-Download dualboot utilites
-Files » Utilities : DualBootUtilities-9.1.0.r80.gd5920b2.zip
-Flash in recovery and it will give you an aroma installer enviroment to select your roms
9- Switch roms without aroma
-In TWRP select flash IMG option instead of zip
-Navigate to /internalmem/Multiboot/[ID]/boot.img
-select flash boot
-swipe to flash then reboot
10- Can i install a rom with aroma installer ?
-Yes , just make sure that the aroma does NOT reboot your device after completion as the dualboot script needs to run after the rom script is done to set the new kernel etc
—---------------------------
Hope this helps whoever wants to use this app , its very simple ,it might look complicated but its easy, GL and have fun
This guide can be used for other devices , Dont forget to hit thanks and reply if it helped.
All thanks for the original devoloper and poster @Anik_khan
First here
Will give it a try ASAP and post my feedback soon
I tried to set it up but i keep getting the error message whenever I click on Set kernel: "Could not determine the boot partition because this device's codename 'hltedalvik.dex2oat-filter=speed' is not recognised". I am using the exynos variant, Dooola v12 rom. Can anyone help me, please?
the\downslash\ said:
I tried to set it up but i keep getting the error message whenever I click on Set kernel: "Could not determine the boot partition because this device's codename 'hltedalvik.dex2oat-filter=speed' is not recognised". I am using the exynos variant, Dooola v12 rom. Can anyone help me, please?
Click to expand...
Click to collapse
If you want to dualboot a TouchWiz ROM, I highly recommend installing TW as the primary ROM. Here is screenshot of my dualboot testing list
webmaster750 said:
If you want to dualboot a TouchWiz ROM, I highly recommend installing TW as the primary ROM. Here is screenshot of my dualboot testing list
Click to expand...
Click to collapse
Very nice configuration, thank you
the\downslash\ said:
I tried to set it up but i keep getting the error message whenever I click on Set kernel: "Could not determine the boot partition because this device's codename 'hltedalvik.dex2oat-filter=speed' is not recognised". I am using the exynos variant, Dooola v12 rom. Can anyone help me, please?
Click to expand...
Click to collapse
F.A.Q number 2 : Common issue with Dooola roms , and DN7 roms due to changes in codename
ro.patcher.device=hltedalvik.vm.dex2oat-filter=speed
This line needs to be fixed in doola build.prop
Changing it to
ro.patcher.device=treltexx Used to work for me But some people reported bootloops , so take a back up first just in case
I have the n910v im running red dragon rom and its showing gracelte and its not compatible ive asked for the correct line for the build.prop and havent gotten an answer as wbat line to change and what to change it to ... can anyone help me?
happy2472 said:
I have the n910v im running red dragon rom and its showing gracelte and its not compatible ive asked for the correct line for the build.prop and havent gotten an answer as wbat line to change and what to change it to ... can anyone help me?
Click to expand...
Click to collapse
QUOTE=clewis.it;70300596]Add this line to the end of /system/build.prop
ro.patcher.device=trlte[/QUOTE
Try that it work for my n910w8.
BluePhnx said:
QUOTE=clewis.it;70300596]Add this line to the end of /system/build.prop
ro.patcher.device=trlte[/QUOTE
Try that it work for my n910w8.
Click to expand...
Click to collapse
ro.patcher.device=trlte ?
BluePhnx said:
QUOTE=clewis.it;70300596]Add this line to the end of /system/build.prop
ro.patcher.device=trlte[/QUOTE
Try that it work for my n910w8.
Click to expand...
Click to collapse
This is what i get
happy2472 said:
This is what i get
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=2447534&page=1099
This is the thread I got my info. Go to page 644.
That is what I used.
ro.patcher.device=trlte
Search for that thread for your model but I think it's the same.
BluePhnx said:
Tthttps://forum.xda-developers.com/showthread.php?t=2447534&page=1099
This is the thread I got my info. Go to page 644.
Click to expand...
Click to collapse
Nope still no good ... let me reboot and see
New
happy2472 said:
New
Click to expand...
Click to collapse
Are you on the latest version?
Wow im usually pretty good at doing this stuff ... is there a more simple set of i structions?
happy2472 said:
Wow im usually pretty good at doing this stuff ... is there a more simple set of i structions?
Click to expand...
Click to collapse
look for ro.product.device= instead of ro.patcher.device=
This worked for me -> ro.product.device=trlte
happy2472 said:
This is what i get
Click to expand...
Click to collapse
Sorry for late response. Your issue is due to your custom Rom changing treltexx names in prop to graceltexx. Usually renaming the changed text to treltexx must work. Use a file editor and search for any grace mention and make sure it says treltexx. Specially the device codename
And update the app It seems old
Sent from my SM-G935F using Tapatalk
Unable to access Roms after a Nandroid Restoration
After doing a nandroid back up in twrp... I restored with my 4 roms with the dualboot patcher....
Only one Rom boots and works the others dont work... whats causing this.... is there anyway to fix this because I have many good data on those roms....plus I would like to feel safe I can do a backup of my roms.
ananjaser1211 said:
F.A.Q number 2 : Common issue with Dooola roms , and DN7 roms due to changes in codename
ro.patcher.device=hltedalvik.vm.dex2oat-filter=speed
This line needs to be fixed in doola build.prop
Changing it to
ro.patcher.device=treltexx Used to work for me But some people reported bootloops , so take a back up first just in case
Click to expand...
Click to collapse
You mentioned making a back up... I have not been sucessfull in making a back up of this app roms... I used twrp and None of the Roms work after restoring the back up.
I got error while flashing zip file from recovery on my device... Seems like it does not support for "trltechn".
Help Please
Thanks a lot
Latest Ufirm QE2 Nougat Firmware For The S7 Flat Only
This well give you a Customizable NonRooted Rom that uses stock boot.img not the eng boot image so there is no lag and it will pass safetynet checks and samsung pay will work
Give this guy @umaro some thanks he worked on this until it became reality even when I gave up
Files To Download
Odin.zip
ADB_Root_G930U_QE2Files.zip
UFIRM_G930_Odin_Firmware.zip
FlashFire_Flashable_G930UFirmware.zip
UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_G930U_QE2_V2.zip
These first 2 step must be done first unless you are on my previous version of this rom or my carrier specific rom that do not have root or if your unsure just do this first
This Will Wipe Your Phone
1. Unzip UFIRM_G930_Odin_Firmware.zip and flash all files in odin
2. Go through setup ignore invalid sim message and skip adding accounts
3. Goto Step 3 Below
If you are on one of my previous version of this rom or my carrier specific rom
1. Unzip UFIRM_G930_Odin_Firmware.zip
2. Use odin to flash BL and CP
3. Unzip ADB_Root_G930U_QE2Files.zip
4. Flash EngBoot image with odin
5. Root Phone. Im not going to have half a page about rooting there is an entire rooting thread here. The Eng Boot.img can be found in the UFIRM_QD2_Modified_Nougat_Firmware Folder
6. Unzip FlashFire_Flashable_G930UFirmware.zip
7. Copy AP_FlashFire_Only_G930U_QE2_Firmware.tar.md5 to your phone
8. Copy UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_G930U_QE2_V2.zip to your phone
9. Open FlashFire and click Add Zip and choose UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_G930U_QE2_V2.zip make sure to check mount system
10. Now in FlashFire click Add Firmware and choose AP_FlashFire_Only_G930U_QE2_Firmware.tar.md5 select all the partitions
11. Make sure Inject SuperSu is not selected
12. Click Add Wipe and choose Wipe Dalvik Cache and Cache and choose Format Cache Also select wipe SuperSU image. Make sure wipe is at end of flash sequence. The sequence should be AP file first then Zip second and Wipe cache last
13. Now Choose Flash
14. Phone will take Up to 20 minutes to boot
15. Reflashing Zip Will Require Flashing The AP File In FlashFire At The Same Time
16. Do not use Package Disabler Pro if you Choose NoNaMe mods in Aroma
MODS- (NoNaMeRomControl)
3minitbattery
Speed meter
Status bar mods
Center clock
Wifi/signal bar mods
Color change icon mod
Custom backgrounds
Notification drop-down
Incallui background
Gif in notification drop-down
Change/remove carrier names
And much more...
THANKS AND CREDITS
@jds3118 for testing and providing files and bootlooping his phone countless times for me
Gharrington for his awesome 3minitbattery mod...
NoNaMe rom development team for their incredible mods and rom control app...
@malbert16442 for his black themes
Xda for all the great guides to accomplish this...
Kernel source
RomControl Source
In the OP I had the ADB_Root_G930U_QE2Files.zip linked to the ADB_Root_G935U_QE2Files.zip zip so please make sure you have the ADB_Root_G930U_QE2Files.zip when downloading. Its fixed in the OP now so just double check
I recommend everyone put the Flashfire AP zip and Rom Zip on your internal storage as the AP file is so large that it may not be read properly do too limitations of some SD Cards. When you select AP file in Firmware there should be 4 partitions that are selected. If not then you have a bad download or need to have AP file on internal storage
Thanks for all your hard work . I just installed this so far so good but I am missing Wi-Fi calling. Is that normal or am I just not looking in the correct place? Thanks
ledezma2003 said:
Thanks for all your hard work . I just installed this so far so good but I am missing Wi-Fi calling. Is that normal or am I just not looking in the correct place? Thanks
Click to expand...
Click to collapse
You may have to flash the TMO version of this rom
jrkruse said:
You may have to flash the TMO version of this rom
Click to expand...
Click to collapse
Ok will try that when I get a chance. Thanks again.
Thx for an awesome rom.
Sorry if this question is asked before but couldn't find a solution (checked Verizon thread as well).
I am running Playstore version ROM and everything is working fine except Video Recording.
Photo is fine but when I record a video with included Camera NX, it only plays sound and the screen is either still or black.
I have been taking a needed break. I will update all my s7 roms including this one in the next few days
Nice
That rom can flash for g930p? tks your work!!
@jrkruse
Thanks for all your contributions to this device. I just bought this device and I've been diving through the forums trying to gather as much info on this locked down device.
Could you provide me with just the boot images that don't check the system image and from what model/rom are they from?
Oh and could you provide the partitions locations? The latest roms have an updated Knox that blocks SU from doing it's thing and I have to perform everything via adb (eng boot).
Blank screen
Hello,
I am on your custom rom and the phone was working fine for a day. After I restarted the phone I am not able to see the lockscreen. Its just blank. I do hear the sound of taking a screenshot when I press the buttons and I also can see the " shut down, restart, emg mode" buttons when I hold the power button but no lockscreen. I tried running the recovery boot img but nothing changed.
There is some kind of issue at the locksceen after a restart.
I'm Stuck
jrkruse said:
Latest Ufirm QE2 Nougat Firmware For The S7 Flat Only
This well give you a Customizable NonRooted Rom that uses stock boot.img not the eng boot image so there is no lag and it will pass safetynet checks and samsung pay will work
Give this guy @umaro some thanks he worked on this until it became reality even when I gave up
Files To Download
Odin.zip
ADB_Root_G930U_QE2Files.zip
UFIRM_G930_Odin_Firmware.zip
FlashFire_Flashable_G930UFirmware.zip
UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_G930U_QE2_V2.zip
These first 2 step must be done first unless you are on my previous version of this rom or my carrier specific rom that do not have root or if your unsure just do this first
This Will Wipe Your Phone
1. Unzip UFIRM_G930_Odin_Firmware.zip and flash all files in odin
2. Go through setup ignore invalid sim message and skip adding accounts
3. Goto Step 3 Below
If you are on one of my previous version of this rom or my carrier specific rom
1. Unzip UFIRM_G930_Odin_Firmware.zip
2. Use odin to flash BL and CP
3. Unzip ADB_Root_G930U_QE2Files.zip
4. Flash EngBoot image with odin
5. Root Phone. Im not going to have half a page about rooting there is an entire rooting thread here. The Eng Boot.img can be found in the UFIRM_QD2_Modified_Nougat_Firmware Folder
6. Unzip FlashFire_Flashable_G930UFirmware.zip
7. Copy AP_FlashFire_Only_G930U_QE2_Firmware.tar.md5 to your phone
8. Copy UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_G930U_QE2_V2.zip to your phone
9. Open FlashFire and click Add Zip and choose UFirm_Multi_Carrier_Hybrid_NoNaMe_PS_BS_Free_G930U_QE2_V2.zip make sure to check mount system
10. Now in FlashFire click Add Firmware and choose AP_FlashFire_Only_G930U_QE2_Firmware.tar.md5 select all the partitions
11. Make sure Inject SuperSu is not selected
12. Click Add Wipe and choose Wipe Dalvik Cache and Cache and choose Format Cache Also select wipe SuperSU image. Make sure wipe is at end of flash sequence. The sequence should be AP file first then Zip second and Wipe cache last
13. Now Choose Flash
14. Phone will take Up to 20 minutes to boot
15. Reflashing Zip Will Require Flashing The AP File In FlashFire At The Same Time
16. Do not use Package Disabler Pro if you Choose NoNaMe mods in Aroma
MODS- (NoNaMeRomControl)
3minitbattery
Speed meter
Status bar mods
Center clock
Wifi/signal bar mods
Color change icon mod
Custom backgrounds
Notification drop-down
Incallui background
Gif in notification drop-down
Change/remove carrier names
And much more...
THANKS AND CREDITS
@jds3118 for testing and providing files and bootlooping his phone countless times for me
Gharrington for his awesome 3minitbattery mod...
NoNaMe rom development team for their incredible mods and rom control app...
@malbert16442 for his black themes
Xda for all the great guides to accomplish this...
Kernel source
RomControl Source
Click to expand...
Click to collapse
I followed the directions up to Step 7.
For the life of me I can not get the AP file to copy to my SD card. Yes I have enough space on it and I can get the ROM copied.
I tried copying the AP file with a file explorer, on my PC, external card reader. Every time I try, it gets to about 95-99% and says "copy failed".
I know it says flashfire only, but is that my only option?
Reegs said:
I followed the directions up to Step 7.
For the life of me I can not get the AP file to copy to my SD card. Yes I have enough space on it and I can get the ROM copied.
I tried copying the AP file with a file explorer, on my PC, external card reader. Every time I try, it gets to about 95-99% and says "copy failed".
I know it says flashfire only, but is that my only option?
Click to expand...
Click to collapse
In my case I created a folder named Download in Internal Storage and copied Zip and AP files there. I didn't have trouble coping files there.
From my experience & guess, you may still have old files & settings even though you flashed U-firm files Step 1-2.
Try to access recovery mode and do factory reset and see if this helps. Make sure you backup all important files to External SD because it will factory reset.
So I rooted my phone using Araltd's guide in this forum. I've got a couple of questions about this rom...
1. If I were to flash this rom to my device, would it remove my root access?
2. What's device performance like? After rooting, my device is very slow and buggy. Will this fix that?
3. Will my device still be full of T-Mobile's bloatware?
Thanks!
wolfpls254 said:
So I rooted my phone using Araltd's guide in this forum. I've got a couple of questions about this rom...
1. If I were to flash this rom to my device, would it remove my root access?
2. What's device performance like? After rooting, my device is very slow and buggy. Will this fix that?
3. Will my device still be full of T-Mobile's bloatware?
Thanks!
Click to expand...
Click to collapse
1. Yes, it will remove Root Access but you can still use ADB to do root stuff like push / pull files.
2. Since it will use stock boot instead of ENG boot, it will fix the lag issue.
3. This is U (universal) firmware so it won't have Tmobile bloat but it will have Samsung bloat/apps. During the install you can also choose de-bloat level too. From my experience BS-Free (2nd one), is both lightweight and stable. If you go with Playstore level (most lightweight, replace Samsung Apps with Google ones), you will have trouble with camera.
kyungone said:
1. Yes, it will remove Root Access but you can still use ADB to do root stuff like push / pull files.
2. Since it will use stock boot instead of ENG boot, it will fix the lag issue.
3. This is U (universal) firmware so it won't have Tmobile bloat but it will have Samsung bloat/apps. During the install you can also choose de-bloat level too. From my experience BS-Free (2nd one), is both lightweight and stable. If you go with Playstore level (most lightweight, replace Samsung Apps with Google ones), you will have trouble with camera.
Click to expand...
Click to collapse
Do you know how this rom compares to the QF6 one which seems to be a bit more popular?
wolfpls254 said:
Do you know how this rom compares to the QF6 one which seems to be a bit more popular?
Click to expand...
Click to collapse
The QF6 ROM you mentioned is T-mobile firmware so it will have Tmobile apps. Most of them can be removed from ROM install or disabled after.
Other than that there's no performance difference.
If you want Tmobile like environment with Tmobile update schedule, go with T-mobile one. If you want less carrier apps, go with U-Firmware one.
I will no longer be updating my s7 threads until the time Oreo is released with root method. For now I have worked with @stang5litre to bring my non-root method to his amazing rom. He currently has a nougat release found here http://stang5litre-roms.proboards.com/
I keep getting samsung pay connection error. any fixes? i tried factory reset and reset settings, but the app still doesnt work. do i have to reflash the rom?
amdeng said:
I keep getting samsung pay connection error. any fixes? i tried factory reset and reset settings, but the app still doesnt work. do i have to reflash the rom?
Click to expand...
Click to collapse
If you at any point tried to root it or flashed the modified boot image then you are no longer passing the safteynet checks, my suggestion is to do a clean install and see if it works then try it again making sure you don't root after you are done installing this rom.