Hi,
I wanted to install CM12.1 in the 1st place but when I tried to install Tangerine Kernel, I got stuck up and the screen went blank with nothing. So I went on with Williams Kernel + CM11 stable version just to be sure that I don't brick my phone permanently.
I have been browsing through the forum, trying to know which Kernel to be used for CM12.1 ? Helium has versions like L and M which confuses me !
It would be really helpful if you guys clarify my queries,
Can anyone please let me know what Kernel and its version to be used with CM12.1 which is stable for daily use ?
Also can I go with huashan's latest nightly build for CM12.1 dated 2016-04-02?
Also I have another doubt in the installation sequence. After installing a new Kernel.zip from SD card through recovery, should I go ahead and install the ROM.zip at the same time or should I reboot my phone after installing the new Kernel and enter recovery again to install the ROM ?
Please help me understand.
I have unlocked bootloader + Williams Kernel + CM11 stable version currently on my phone.
Thanks in advance.
If you are using a new nightly of cm12.1 don't use tangerine kernel because is outdated. Use helium or the stock one. For helium: M means marshmallow, that's android 6.0.1. You have to use helium L. The l stands for lollipop, Android 5.1.1.
And, if you flash the kernel and then flash the rom zip you will overwrite the kernel, so at the end you won't install anything.
The installation is in the thread but afaik you have to flash first the rom zip and then the kernel.
Sent from my A0001 using Tapatalk
How old Kernel supports new ROM ?
darjwx said:
If you are using a new nightly of cm12.1 don't use tangerine kernel because is outdated. Use helium or the stock one. For helium: M means marshmallow, that's android 6.0.1. You have to use helium L. The l stands for lollipop, Android 5.1.1.
And, if you flash the kernel and then flash the rom zip you will overwrite the kernel, so at the end you won't install anything.
The installation is in the thread but afaik you have to flash first the rom zip and then the kernel.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Thanks @darjwx for the reply . You have mentioned that we need to flash rom.zip followed by the kernel.zip that is needed for the ROM. But how does the old kernel (Williams Kernel in my case) support the new ROM (cm12.1 in my case) ?
As per my understanding, we need a proper Kernel to run the ROM. Is it not like that ? Also ROM and Kernel shares different memory right ?
The rom zip comes with a kernel, so flashing the rom zip will install the new kernel.
Yep you can say that. But it's better to say that they are using different partitions.
Sent from my A0001 using Tapatalk
darjwx said:
The rom zip comes with a kernel, so flashing the rom zip will install the new kernel.
Yep you can say that. But it's better to say that they are using different partitions.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Thanks bro. I'll try it.
use doomkernel
Download and use doomkernel which is compatible with your device model if its avaible for your device from xda
Related
Hi, I need help with my Galaxy Note. I just buy secondhand Galaxy Note, it has XXLS2 4.1.1 rom for now. I want flash AOSPA 4.2.1 rom on it. My previous phone was HTC HD2, so I'm used to flashing without limitation So, I need your help to tell me if I'm thing good about it. So, firstly I must flash Philz kernel for my phone, to get root and recovery. But for my rom is only version 2.7... is it safe to flash? And next I can just do full wipe, reboot, and flash AOSPA 4.2.1 rom, yes?
You won't be able to flash a aokp rom using philz 2.7 as it will not install and error 7.
-Install Philz and gain root and cwm
-Then place all the required files to flash the rom to storage.
-Then flash a different safe kernel like hydracore or cm kernel.
-Boot into recovery and do wipes and formats and flash. the rom. (while on a different kernel you might not be able to boot into the rom. Just recovery)
And version 2.7 is safe? Why there is no 3.99 version for this rom? But when I finally flash PA rom, I can stay with kernel included in this rom? Or I need to flash cm kernel second time? I'm going to make backup before flashing new rom, but I'm just wondering if I can normally recover this on PA rom or I need to flash stock philz kernel before restoring... So the "diffrent safe" kernel may be "Kernel_CM10.1_20130126_Nightly_CWM.zip", yes? It will work with aosp based pa rom? I'm going to flash 2.99 version...
sinedoOo said:
And version 2.7 is safe? Why there is no 3.99 version for this rom? But when I finally flash PA rom, I can stay with kernel included in this rom? Or I need to flash cm kernel second time? I'm going to make backup before flashing new rom, but I'm just wondering if I can normally recover this on PA rom or I need to flash stock philz kernel before restoring... So the "diffrent safe" kernel may be "Kernel_CM10.1_20130126_Nightly_CWM.zip", yes? It will work with aosp based pa rom? I'm going to flash 2.99 version...
Click to expand...
Click to collapse
Yes 2.7 is safe. Just that it cannot install some roms.
Because it's and old kernel.
Yes stay with the kernel included in the rom
Yes PA has a safe kernel and the backup can be restored.
Any kernel like hydracore or cm will do.
Also 2.99 PA might not to that's stable. So.. Your choice. You can use and older version like 2.57 as well
Actually Philz 2.7 is ICS/older JB, and therefore not subject to error 7. Good to wipe and Flash ROMs with. (It's safe too)
Sent from my GT-N7000 using xda app-developers app
shoey63 said:
Actually Philz 2.7 is ICS/older JB, and therefore not subject to error 7. Good to wipe and Flash ROMs with. (It's safe too)
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Need to meditate
GT N7000
hi frds i am having a issue with Amnix Xperia ROM Build 3 for GT N7000. After I installed my antivirus & later when it finished scanning for malware it gives warning about one app - MALICIOUS APP
VOODOO-INSTANT-ANTI-EXYNOS-MEM-ABUSE-0.3.APK
EXPLOIT.EXYNOS.A
can someone pls help....is it a virus....
It's already replied in the noob friendly thread
I forget to reply, sorry. Thanks! It is all working good, so I have now my Galaxy Note with newest Paranoidandroid rom
Hi there,
i got currently on my 4x: pac man rom so cwm, root, bootloader unlocked...
now i want a new kernel, so is the pac man rom compatible with an other kernel? and if, which ones are best and stable for my device and pacman rom?
And last how will I install them (most kernels i found got intruductions)..?
if i fogot some information ask
Thx
Try it out. PAC is based on three different ROMs so I don't know exactly if cm based kernels work but I would try werewolf.
You can install the kernel through cwm flash if there's a flashable zip like in the werewolfJB thread
But don't forget to make a full backup ,
just in case
Sent from my LG-P880
Omario-242 said:
Try it out. PAC is based on three different ROMs so I don't know exactly if cm based kernels work but I would try werewolf.
You can install the kernel through cwm flash if there's a flashable zip like in the werewolfJB thread
But don't forget to make a full backup ,
just in case
Sent from my LG-P880
Click to expand...
Click to collapse
Okay ty, so i'll just try it out later With the werewolf
Thx for the answer
Sent from my LG-P880 using xda app-developers app
Hey noobiei5,
werewolf kernel seems to work with pacman rom (at least for me )
You find a link to a flashable .zip in the 3rd post in the kernel thread ( http://forum.xda-developers.com/showthread.php?t=2256899 ). Make sure you choose the CM-Kernel and flash it via CWM.
If mobile data doesn't work a full wipe in CWM might help
Hi all
I have been trying to find out what the latest version of clockwerkmod is and I would just like someone who knows to inform me if the version given out by rom manager which is 6.0.4.3 is the latest and greatest just so i can make sure it has selinux support as i'm quite new to hacking android.
I have been using the thread on the original development section however could some also inform me as to what "cm only" and "tw only" means as i cant find that on the thread
Thanks
CM only : kernel will only work on cm roms.
TW only : will work only of stock based custom rom.
I think the latest for note as per the cm kernel is 6.0.4.5.
nokiamodeln91 said:
CM only : kernel will only work on cm roms.
TW only : will work only of stock based custom rom.
I think the latest for note as per the cm kernel is 6.0.4.5.
Click to expand...
Click to collapse
Ah, so TW would stand for touchwiz then, ok
Also I've found an update but its not sticking when i flash it. Everytime i reboot, it reverts to an old version...
You cannot flash recovery using rom manager. You will need to change the kernel.
Hello,
I want to install Kitkar 4.4 on my Samsung Galaxy Note GT-N7000(India).
I'm completely not aware for this android installation. So please help me.
Please tell me steps and download links. I tried steps which is i got fro internet but most of the time file location was banned by government or removed. So again tried with CWM but still i got stuck. Now I'm using Android Jelly Bean 4.1.2, Build no- JZO54K.N7000DLSC, Kernel version- 3.0.31-906407(SMP PREEMPT WED MARCH 6 19:53:40 KST 2013). This is my phone details. Please suggest me for this model.
Thanks in advance.
Rahul.
I use Firefox with anonimox extesion to bypass the banned's site... But i'm in Italia. You Can try.
The Step to install kilkat are:
Install The correct philz kernel version.
Install the raw kernel and reboot the recovery.
Full wipe.
Install the 4.4 Rom
Install the gapps.
Wipe cache and dalvik
Roboot.
Inviato dal mio GT-N7000 utilizzando Tapatalk
try cm11 by herna (try the latest built by frantisheq) really stable and smooth
btw: full wipe means wipe data, wipe cache, wipe dalvik and manually format /system.
Sent from my GT-N7000 using XDA Premium 4 mobile app
I've tried to install 4.4 kitkat on my note n7000 too but there are too much cusrom, such as asylum,omnirom, cyogenmod and much recovery mode like cwm,twrp, this is make me so frustating, what to choose what to install? If anyone can guide newbie like us step by step and also the link, the best step that never make our phone brick
just stay away from Stock ICS kernel (dont wipe anything using stock ics recovery)
then root your rom and make a backup of your efs (this is the most important step)
now each thread contains all the steps you need to follow, just read them carefully)
I advice you to try herna cm11 (very stable)
regards
Sent from my GT-N7000 using XDA Premium 4 mobile app
done install philz kernel+safe kernel for my JB 4.1.2 and supersu 1.89. Want to install kitkat 4.4 but don't know where to start :crying:
aphinxwu said:
done install philz kernel+safe kernel for my JB 4.1.2 and supersu 1.89. Want to install kitkat 4.4 but don't know where to start :crying:
Click to expand...
Click to collapse
Ok my friend
I use this method to install cm 11 4.4 kitkat
1- I install philz kernel+safe kernel for my JB 4.1.2
2- I install cm 10.2 (4.3) or cm10.1 (4.2.2)
3- I install cm11(4.4)
It work to me and I install 3 kitkat rom
Or as he is already on philz kernel, just flash raw kernel reboot recovery and flash omnirom or asylum omnirom or Nameless Rom or DU or SlimKat
Sent from my GT-N7000 using Tapatalk
Dawood Al Amri said:
Ok my friend
I use this method to install cm 11 4.4 kitkat
1- I install philz kernel+safe kernel for my JB 4.1.2
2- I install cm 10.2 (4.3) or cm10.1 (4.2.2)
3- I install cm11(4.4)
It work to me and I install 3 kitkat rom
Click to expand...
Click to collapse
So if i want to install kitkat, after i install philz kernel then i directly install cm11 (4.4) ? why you install 3 kitkat rom?
treacherous_hawk said:
Or as he is already on philz kernel, just flash raw kernel reboot recovery and flash omnirom or asylum omnirom or Nameless Rom or DU or SlimKat
Sent from my GT-N7000 using Tapatalk
Click to expand...
Click to collapse
sorry i'm newbie, how to flash raw kernel? flash is mean install? sorry stupid question.
aphinxwu said:
So if i want to install kitkat, after i install philz kernel then i directly install cm11 (4.4) ? why you install 3 kitkat rom?
Click to expand...
Click to collapse
I mean if you want to install kitkat in your phon and you have 4.1.2 by recovery philz you must install cm10.2 Jely been 4.3 after you install 4.3 you can install 4.4 kitkat
I use this method and I install 3 rom kitkat
Dawood Al Amri said:
I mean if you want to install kitkat in your phon and you have 4.1.2 by recovery philz you must install cm10.2 Jely been 4.3 after you install 4.3 you can install 4.4 kitkat
I use this method and I install 3 rom kitkat
Click to expand...
Click to collapse
wow so much step huh. maybe theres a more shortcut way if dont, i'm gonna take your way
aphinxwu said:
wow so much step huh. maybe theres a more shortcut way if dont, i'm gonna take your way
Click to expand...
Click to collapse
Install this recovery
http://downloadandroidrom.com/file/GalaxyNote/recovery/n7000-CWM-KitKatCompatible.zip
Aftarthat you can install kitkat 4.4.2
Just flash the raw Kernel from this thread:
http://forum.xda-developers.com/showthread.php?t=2397000
Then reboot into recovery directly (DO NOT reboot into system) then flash directly whatever you want of KitKat based ROMs.
Remember to follow the instructions of each ROM that is mentioned in the opening post of the thread.
kaborayyan said:
Just flash the raw Kernel from this thread:
http://forum.xda-developers.com/showthread.php?t=2397000
Then reboot into recovery directly (DO NOT reboot into system) then flash directly whatever you want of KitKat based ROMs.
Remember to follow the instructions of each ROM that is mentioned in the opening post of the thread.
Click to expand...
Click to collapse
thanks you for the link source. it help me cm10.2 is the latest?
Dawood Al Amri said:
Install this recovery
http://downloadandroidrom.com/file/GalaxyNote/recovery/n7000-CWM-KitKatCompatible.zip
Aftarthat you can install kitkat 4.4.2
Click to expand...
Click to collapse
is this recovery support kitkat nameless? i would like to install nameless. thank you for the link
Dawood Al Amri said:
Install this recovery
http://downloadandroidrom.com/file/GalaxyNote/recovery/n7000-CWM-KitKatCompatible.zip
Aftarthat you can install kitkat 4.4.2
Click to expand...
Click to collapse
Hey i already follow ur instruction and it works. Thank you. Very happy this is the first time for me changing rom :fingers-crossed:
but there's question i want to ask you, can i still use philz kernel to install rom kitkat? because i prefer philz kernel UI than cwm
Thank you sir
aphinxwu said:
Hey i already follow ur instruction and it works. Thank you. Very happy this is the first time for me changing rom :fingers-crossed:
but there's question i want to ask you, can i still use philz kernel to install rom kitkat? because i prefer philz kernel UI than cwm
Thank you sir
Click to expand...
Click to collapse
as mentioned earlier you need raw kernel to flash omnirom, you will get error if you try to flash using philz kernel.
treacherous_hawk said:
as mentioned earlier you need raw kernel to flash omnirom, you will get error if you try to flash using philz kernel.
Click to expand...
Click to collapse
ooo i understand. what's different between kernel and raw kernel? i install kitkat with cwm it works.
aphinxwu said:
ooo i understand. what's different between kernel and raw kernel? i install kitkat with cwm it works.
Click to expand...
Click to collapse
Raw kernel has SElinux support and that is required to be able to flash kitkat.
treacherous_hawk said:
Raw kernel has SElinux support and that is required to be able to flash kitkat.
Click to expand...
Click to collapse
so cwm is raw kernel too. How we know what kernel is support SELinux? So, if i dont instal philz kernel on my official stock rom before and then directly install cwm, so after that i can install kitkat ?
aphinxwu said:
so cwm is raw kernel too. How we know what kernel is support SELinux? So, if i dont instal philz kernel on my official stock rom before and then directly install cwm, so after that i can install kitkat ?
Click to expand...
Click to collapse
raw kernel r4 is cwm while r5 is TWRP. To root and get custom recovery for your stock rom,you must flash philz kernel. Once you have philz kernel, reboot recovery and from there flash r4 or r5 kernel and again reboot recovery and then do the wipes and flash any kitkat rom with gapps. Kernel with SELinux support are raw kernel, r4 and r5, Asylum kernel http://asylumrom.com/Asylum/Asylum-Roms/KitKat-4.4/N7000/kerner/.
Main thread + features + install instructions + dev support
http://forum.xda-developers.com/showthread.php?t=2201860
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM
It is a well proven recovery for many phones
It also adds a full touch interface a completely configurable GUI
Please give your feedback, what works, and any bug you could encounter
Read the features, and check if you are missing something
Also, do not forget to read about the powerful aroma file manager integration and double tap shortcut
Huge thanks to @Phil3759 for this excellent work! and for posting it for the Xperia Z1 (honami)... this version is a DIRECT port from the Z1 !
To enter recovery keep tapping the VOLUME UP key when you see the Sony bootlogo!
Download links
Kernels will be provided as recovery flashable update.zips! If you dont have existing recovery just open the kernel package using WinZip/WinRAR/7zip extract the boot.img and flash it using fastboot!
FW: 17.1.1.A.0.402
Advanced Stock Kernel with PhilZ Touch Recovery v01
MD5HASH: 4ee05a3545eb54b8c5f5824cff84e2f7
regards,
DooMLoRD
XDA:DevDB Information
[sirius][CWM Advanced Edition] PhilZ Touch {UNOFFICIAL}, Kernel for the Sony Xperia Z2
Contributors
DooMLoRD, Phil3759, [NUT]
Kernel Special Features: Stock kernel with PhilZ Touch Recovery inbuilt!
Version Information
Status: Stable
Created 2014-05-27
Last Updated 2014-05-27
:good:
Uploaded to main thread and goo server
Phil3759 said:
:good:
Uploaded to main thread and goo server
Click to expand...
Click to collapse
thanks!
can you please provide latest ramdisks for PhilZ recovery?
device tree is same as honami.... just update the following things:
Device Name: Xperia Z2
codename: sirius
DooMLoRD said:
thanks!
can you please provide latest ramdisks for PhilZ recovery?
device tree is same as honami.... just update the following things:
Device Name: Xperia Z2
codename: sirius
Click to expand...
Click to collapse
Please remind me in a few days when I update my repo to better support f2fs code
Will repo sync and rebuild for you
Just remind me as I am going to forget it
Is this just stock kernel. With Philz Touch added.
nintendolinky said:
Is this just stock kernel. With Philz Touch added.
Click to expand...
Click to collapse
yup
DOOMLORD, first of all thanks for your work.
any progress rooting and flashing this to the locked bootloader models?thanks
DooMLoRD said:
yup
Click to expand...
Click to collapse
Ok, in your kernel thread it states it has Philz Touch, but ivr never been able to get it load other than straight after flashing it. Is there an issue somewhere, even if i use your reboot app, it reboots either into twrp or cwm, which i can use, so not a huge issue, would just prefer to use Philz. Thanks.
Sent from my D6503 using Tapatalk
Does this work well with the 402 update, Philz recovery was always my favourite recovery on SGS3, not seen many posts in here recently so looking for opinions.
Plan is to get unlock code from Sony, use FlashTool to unlock the bootloader, use Flashtool to flash the boot img from the first post in this thread & then flash superSU, is that the bets way to go about it?
BanziBaby said:
Does this work well with the 402 update, Philz recovery was always my favourite recovery on SGS3, not seen many posts in here recently so looking for opinions.
Plan is to get unlock code from Sony, use FlashTool to unlock the bootloader, use Flashtool to flash the boot img from the first post in this thread & then flash superSU, is that the bets way to go about it?
Click to expand...
Click to collapse
Yes, it's dedicated for the .402 update
Your plan is valid, although keep in mind that Doomkernel has also Philz integrated.
Cheers for the reply mate. Is there a way to flash Philz with just the stock kernel or does it have to DoomLord's advanced kernel?
BanziBaby said:
Cheers for the reply mate. Is there a way to flash Philz with just the stock kernel or does it have to DoomLord's advanced kernel?
Click to expand...
Click to collapse
it is the stock kernel the ramdisk has been "edited" to include philz recovrey
Hi OP,
I am using Build version: 6.29.8 - Xperia Z1 on Xperia X2 D6503.
(maybe slightly older than the latest one?)
I just tried to "Custom backup" my /sdcard partition for file recovery purpose.
However, the "Backup size" was 0.
So i wonder if the backup "sd-ext" function is still working on the PhilZ version.
Thanks in advance.
Will this work on D6502 and do i need an unlocked bootloader for it. Please somebody suggest. Thanks
ive flashed this
however i cant seem to access the recovery partition?
Great work guys !
Will this work with CM11, i currently have the latest CM11 NIGHTLY installed along with CWM recovery 6.0.5.0.
EDIT:
Also, i installed the latest firmware .314 before going to CM11, will flashing this change my kernel to anything other than what i have now ?
Thanks !
S M G said:
Great work guys !
Will this work with CM11, i currently have the latest CM11 NIGHTLY installed along with CWM recovery 6.0.5.0.
EDIT:
Also, i installed the latest firmware .314 before going to CM11, will flashing this change my kernel to anything other than what i have now ?
Thanks !
Click to expand...
Click to collapse
If you flash CM11 then you will have CM11 kernel
waynekirby said:
If you flash CM11 then you will have CM11 kernel
Click to expand...
Click to collapse
Thanks,
So even if i currently have CM installed, flashing this wont change my CM kernel ???, or will i have to reflash CM to get CM kernel ?
S M G said:
Thanks,
So even if i currently have CM installed, flashing this wont change my CM kernel ???, or will i have to reflash CM to get CM kernel ?
Click to expand...
Click to collapse
This version is for stock based roms, older ones at that. So no, CM won't work with this installed unfortunately.
waynekirby said:
If you flash CM11 then you will have CM11 kernel
Click to expand...
Click to collapse
waynekirby said:
This version is for stock based roms, older ones at that. So no, CM won't work with this installed unfortunately.
Click to expand...
Click to collapse
DAMN !
Okay thanks for the info mate. :good: