Database Develop

[URGENT] Stuck on B609 PLEASE HELP, SO LOST (not a complete noob)

I flashed B609 CWM Stock from XDA from B813 and it worked fine then reset to factory
Now on B609, I cannot flash B621 OTA, Stock or Incremental at all, just fails at 0%
I tried with stock recovery and cwm and twrp
I always get the "cannot execute the file from zip" usually because of the build.prop, even removing the checks from buildprop, it fails at 3dmodem folder
I checked the build.prop with Build.Prop viewer and all the inputs such as build, model etc is correct
There is no motion control tho, but keyboard and wifi works
I really dont like B609, very slow
I want to get to B815
Can anyone help me completely redo my phone????
PLEASE PLEASE PLEASE
Thanks in advance

danielproenca said:
I flashed B609 CWM Stock from XDA from B813 and it worked fine then reset to factory
Now on B609, I cannot flash B621 OTA, Stock or Incremental at all, just fails at 0%
I tried with stock recovery and cwm and twrp
I always get the "cannot execute the file from zip" usually because of the build.prop, even removing the checks from buildprop, it fails at 3dmodem folder
I checked the build.prop with Build.Prop viewer and all the inputs such as build, model etc is correct
There is no motion control tho, but keyboard and wifi works
I really dont like B609, very slow
I want to get to B815
Can anyone help me completely redo my phone????
PLEASE PLEASE PLEASE
Thanks in advance
Click to expand...
Click to collapse
did you try the 3 keys method?

Principleoflust said:
did you try the 3 keys method?
Click to expand...
Click to collapse
No? What is that??

Principleoflust said:
did you try the 3 keys method?
Click to expand...
Click to collapse
If you're talking about the power, + and - volume then yes I have tried that, each update of B621 never goes past 1% and it says it cannot execute the zip

danielproenca said:
If you're talking about the power, + and - volume then yes I have tried that, each update of B621 never goes past 1% and it says it cannot execute the zip
Click to expand...
Click to collapse
Well, of course it cannot execute a zip file - there should be an update.app in the dload folder.
So try with B609 stock recovery, with an extracted update.app, and everything should be fine. I'd also try a factory reset before flashing, just to be sure.

g4b3rm4n said:
Well, of course it cannot execute a zip file - there should be an update.app in the dload folder.
So try with B609 stock recovery, with an extracted update.app, and everything should be fine. I'd also try a factory reset before flashing, just to be sure.
Click to expand...
Click to collapse
The zip wont execute when its the incremental OTA
Update.zip in the DLOAD folder doesnt work either, even tried a factory reset

danielproenca said:
The zip wont execute when its the incremental OTA
Update.zip in the DLOAD folder doesnt work either, even tried a factory reset
Click to expand...
Click to collapse
Unzip the update.zip file - you just need the update.app inside.

g4b3rm4n said:
Unzip the update.zip file - you just need the update.app inside.
Click to expand...
Click to collapse
Yes of course, its simple, its not the first time I'm doing this
I dont know what the problem is but with just the UPDATE.APP in the DLOAD it still doesnt update

danielproenca said:
Yes of course, its simple, its not the first time I'm doing this
I dont know what the problem is but with just the UPDATE.APP in the DLOAD it still doesnt update
Click to expand...
Click to collapse
What is the recovery you are using? Try flashing it from here, then three button method (VOL + and - and POWER). You could also try to flash B609 and its CUST partition first, and THEN the 621 OTA.
BTW if I were you, I'd wait for the official Lollipop since this one is not stable. It eats more RAM out of the box, and openin applications freeze the whole system after a few months. I just reverted back to B609 because the phone couldn't even play music without waiting for 30 seconds for the Play Music to load, then pressing the button, then waiting, then start, then crash, then start over and pray.

[FIX]Marshmallow BOOTLOOP

OK people, so i bring another (hopefuly helpful to someone) exprecience with BOOTLOOP.
Problem: I had stock B200 firmware (5.0.2). I wanted to try beta update of marshmallow, so i decided to try it. It was told me i can update directly from B200 one, so i just copied update.zip to DLOAD folder, went to settings and run local update. The phone restarted, booted into recovery and started flashing. BUT, i forgot that i had custom TWRP recovery and not stock one, anyway, TWRP started flashing the zip, error after error, but some files still copied and bricked the phone. I couldnt start any recovery, just fastboot and some mode that should download online file and reflash system, but it would be very easy so it has error too.
Here is what i did:
1. Download the update zip of marshmallow you were trying to flash and unpack UPDATE.APP
2. Extrac: RECOVERY.img and BOOT.img
3. set phone to fastboot mode and flash extracted BOOT.img, then RECOVERY.img
4. after that, you need somehow copy whole B200 firmware into sdcard / dload folder (i took micro sd and inserted into another phone, then copied it)
5. now you can boot into force flashing mode (power + volume up + volume down buttons) and it automaticaly reflash whole system.
6. after reboot you can use your P8

OK, i got it work!

00471 said:
OK, i got it work!
Click to expand...
Click to collapse
Great to hear that, can you please answer how you did it,as this might help someone having the same problem

Salman Al-Badgail said:
Great to hear that, can you please answer how you did it,as this might help someone having the same problem
Click to expand...
Click to collapse
of course, i wanted to do it but didnt have time, ill update OP with solution

00471 said:
of course, i wanted to do it but didnt have time, ill update OP with solution
Click to expand...
Click to collapse
Thanks :good:

00471 said:
OK people, so i bring another (hopefuly helpful to someone) exprecience with BOOTLOOP.
Problem: I had stock B200 firmware (5.0.2). I wanted to try beta update of marshmallow, so i decided to try it. It was told me i can update directly from B200 one, so i just copied update.zip to DLOAD folder, went to settings and run local update. The phone restarted, booted into recovery and started flashing. BUT, i forgot that i had custom TWRP recovery and not stock one, anyway, TWRP started flashing the zip, error after error, but some files still copied and bricked the phone. I couldnt start any recovery, just fastboot and some mode that should download online file and reflash system, but it would be very easy so it has error too.
Here is what i did:
1. Download the update zip of marshmallow you were trying to flash and unpack UPDATE.APP
2. Extrac: RECOVERY.img and BOOT.img
3. set phone to fastboot mode and flash extracted BOOT.img, then RECOVERY.img
4. after that, you need somehow copy whole B200 firmware into sdcard / dload folder (i took micro sd and inserted into another phone, then copied it)
5. now you can boot into force flashing mode (power + volume up + volume down buttons) and it automaticaly reflash whole system.
6. after reboot you can use your P8
Click to expand...
Click to collapse
Tried exactly as you say, STILL Software install failed.

Can you send me link which system you are trying to flash? Maybe you have just bad package
Odoslané z HUAWEI GRA-L09 pomocou Tapatalku

Can't get it to work
00471 said:
OK people, so i bring another (hopefuly helpful to someone) exprecience with BOOTLOOP.
Problem: I had stock B200 firmware (5.0.2). I wanted to try beta update of marshmallow, so i decided to try it. It was told me i can update directly from B200 one, so i just copied update.zip to DLOAD folder, went to settings and run local update. The phone restarted, booted into recovery and started flashing. BUT, i forgot that i had custom TWRP recovery and not stock one, anyway, TWRP started flashing the zip, error after error, but some files still copied and bricked the phone. I couldnt start any recovery, just fastboot and some mode that should download online file and reflash system, but it would be very easy so it has error too.
Here is what i did:
1. Download the update zip of marshmallow you were trying to flash and unpack UPDATE.APP
2. Extrac: RECOVERY.img and BOOT.img
3. set phone to fastboot mode and flash extracted BOOT.img, then RECOVERY.img
4. after that, you need somehow copy whole B200 firmware into sdcard / dload folder (i took micro sd and inserted into another phone, then copied it)
5. now you can boot into force flashing mode (power + volume up + volume down buttons) and it automaticaly reflash whole system.
6. after reboot you can use your P8
Click to expand...
Click to collapse
I did exactly the same mistake as you and the same steps to fix it. I flashed those 2, places the update.app + the other files to dload and then 3 button update and I got to the huawei music and animation. Then it restarted.
mega:///#!IEhCRaRR!GT6Ds9EywDoW5Dd8ZdKVesyQUItbiSwCPaapFhAenEY
is the file I use.
Is there any advice you could give?

T1mb3 said:
I did exactly the same mistake as you and the same steps to fix it. I flashed those 2, places the update.app + the other files to dload and then 3 button update and I got to the huawei music and animation. Then it restarted.
mega:///#!IEhCRaRR!GT6Ds9EywDoW5Dd8ZdKVesyQUItbiSwCPaapFhAenEY
is the file I use.
Is there any advice you could give?
Click to expand...
Click to collapse
Actually i do, i bricked my phone one after that later, and this helped: http://www.huawei-info.de/p8-mm-rollback flash B300 rollback zip with 3 buttons combination, then flash B200 full zip. I hope it will help :good:

00471 said:
Actually i do, i bricked my phone one after that later, and this helped: xx flash B300 rollback zip with 3 buttons combination, then flash B200 full zip. I hope it will help :good:
Click to expand...
Click to collapse
I'll give it a try.
Thank you!
It says Software install failed when trying to flash rollback.. I'll try to install the b200 full zip now

T1mb3 said:
I'll give it a try.
Thank you!
It says Software install failed when trying to flash rollback.. I'll try to install the b200 full zip now
Click to expand...
Click to collapse
okay, do this:
in fastboot flash those files from Marshmallow B313: recovery.img, boot.img and cust.img
then try to flash rollback, the CUST.img is very important to flash

00471 said:
okay, do this:
in fastboot flash those files from Marshmallow B313: recovery.img, boot.img and cust.img
then try to flash rollback, the CUST.img is very important to flash
Click to expand...
Click to collapse
There is no cust in the update.app

T1mb3 said:
There is no cust in the update.app
Click to expand...
Click to collapse
Okay have chaos in this all files, maybe it was B200 cust, or B170 cust, try one of them, but boot.img and recovery.img must be from Beta

00471 said:
Okay have chaos in this all files, maybe it was B200 cust, or B170 cust, try one of them, but boot.img and recovery.img must be from Beta
Click to expand...
Click to collapse
I think I'll get it working as soon as I get a large enough sdcard..
Thanks for your help!
I'll comment here if I face more problems

T1mb3 said:
I think I'll get it working as soon as I get a large enough sdcard..
Thanks for your help!
I'll comment here if I face more problems
Click to expand...
Click to collapse
No problem, let me know if you solve it

00471 said:
No problem, let me know if you solve it
Click to expand...
Click to collapse
Awesome, I got it working.
I used b170 cust, if someone has trouble.
Thank you so much!

T1mb3 said:
Awesome, I got it working.
I used b170 cust, if someone has trouble.
Thank you so much!
Click to expand...
Click to collapse
Glad it worked!

Offtopic: if i root after reverting to 5.0.1 using twrp should i then flash stock recovery from b200 or b313 or which one? I mean when the non beta marshmallow update is available

Qqman55 said:
Offtopic: if i root after reverting to 5.0.1 using twrp should i then flash stock recovery from b200 or b313 or which one? I mean when the non beta marshmallow update is available
Click to expand...
Click to collapse
If you are on 5.0.1 with root and twrp then you are good, or do you want try BETA? if yes then you need stock recovery flash before flashing beta

00471 said:
OK people, so i bring another (hopefuly helpful to someone) exprecience with BOOTLOOP.
Problem: I had stock B200 firmware (5.0.2). I wanted to try beta update of marshmallow, so i decided to try it. It was told me i can update directly from B200 one, so i just copied update.zip to DLOAD folder, went to settings and run local update. The phone restarted, booted into recovery and started flashing. BUT, i forgot that i had custom TWRP recovery and not stock one, anyway, TWRP started flashing the zip, error after error, but some files still copied and bricked the phone. I couldnt start any recovery, just fastboot and some mode that should download online file and reflash system, but it would be very easy so it has error too.
Here is what i did:
1. Download the update zip of marshmallow you were trying to flash and unpack UPDATE.APP
2. Extrac: RECOVERY.img and BOOT.img
3. set phone to fastboot mode and flash extracted BOOT.img, then RECOVERY.img
4. after that, you need somehow copy whole B200 firmware into sdcard / dload folder (i took micro sd and inserted into another phone, then copied it)
5. now you can boot into force flashing mode (power + volume up + volume down buttons) and it automaticaly reflash whole system.
6. after reboot you can use your P8
Click to expand...
Click to collapse
can you upload stock recovery of b313?

Any trick find to rollback to 5.1.1 ? on CRR-09 ?

Hello mate S owners , is there any way to rollback to 5.1.1 ?
thkx

mazighi said:
Hello mate S owners , is there any way to rollback to 5.1.1 ?
thkx
Click to expand...
Click to collapse
No.
This question has been asked before, please search the forum before posting

brumgav said:
No.
This question has been asked before, please search the forum before posting
Click to expand...
Click to collapse
It's he who already asked the question. Opened 2 New Threads and posted under 4 other Threads. He's getting seriously annoying.

Try this.....
1. dl huawei update extractor
2. dl the rom
3. Open These update.app with huawei update extra Tor
4. extract the files......Boot.img cust.img recovery.img recovery2.img system.img and userdata.img
5. enable USB debbuging
6. Go in bootloader and connect it
7. Flash the files

xynewageyx said:
Try this.....
1. dl huawei update extractor
2. dl the rom
3. Open These update.app with huawei update extra Tor
4. extract the files......Boot.img cust.img recovery.img recovery2.img system.img and userdata.img
5. enable USB debbuging
6. Go in bootloader and connect it
7. Flash the files
Click to expand...
Click to collapse
Thank's , i have tried this but it tell me failed

xynewageyx said:
Try this.....
1. dl huawei update extractor
2. dl the rom
3. Open These update.app with huawei update extra Tor
4. extract the files......Boot.img cust.img recovery.img recovery2.img system.img and userdata.img
5. enable USB debbuging
6. Go in bootloader and connect it
7. Flash the files
Click to expand...
Click to collapse
I've tried this,albeit without the userdata.img however although it took me back to EMUI 3.1 and Lollipop some menu items were not working such as setting a screen lock and unable to get to guest mode.
Would also not update using the B114 full ROM, would only accept the B303 beta.

http://www.android-hilfe.de/thema/huawei-mate-s-zurueck-zur-145.762060/
It´s in german language and even not proved. But provement is on the way!

mazighi said:
Thank's , i have tried this but it tell me failed
Click to expand...
Click to collapse
Dont write fastboot flash boot.img and the path
Write fastboot flash boot and the path

xynewageyx said:
Dont write fastboot flash boot.img and the path
Write fastboot flash boot and the path
Click to expand...
Click to collapse
Yes , for exemple i have tried
fastboot flash boot boot.img
like this ?

mazighi said:
Yes , for exemple i have tried
fastboot flash boot boot.img
like this ?
Click to expand...
Click to collapse
Type fastboot flash boot.........you can put the file in your cmd console (drag&drop) for the path....i dont know why this not work for you
The path is c:\.....where you extracted........ and the update.app must be a full rom not ota update

Ive tried flashing the recovery.img, boot.img, cust.img and system.img from B145, then factory reset and then restoring a TRWP backup of B114 however it still doesn't work, still cannot access lock screen settings (and fingerprint settings) or security settings.

brumgav said:
Ive tried flashing the recovery.img, boot.img, cust.img and system.img from B145, then factory reset and then restoring a TRWP backup of B114 however it still doesn't work, still cannot access lock screen settings (and fingerprint settings) or security settings.
Click to expand...
Click to collapse
try this
flash b114
flash your backup
flash stock recovery again
make a local update to b145

xynewageyx said:
try this
flash b114
flash your backup
flash stock recovery again
make a local update to b145
Click to expand...
Click to collapse
After I flashed the .img files from a b114 ROM I tried restoring my backup however it failed so I had to restore my b303 backup

Rollback
We work here in the German Forum (Android Hilfe) for weeks to find a solution. The rollback is not yet possible.

brumgav said:
After I flashed the .img files from a b114 ROM I tried restoring my backup however it failed so I had to restore my b303 backup
Click to expand...
Click to collapse
Try this........DL the Firmware you want anderen extract the Update.app
Flash this IMG Files via fastboot
Boot.img
System.img
Recovery.img
Maybe Recovery 2
Reboot your phone
---------- Post added at 04:36 PM ---------- Previous post was at 04:34 PM ----------
If the settings not work make a factory reset after boot

There is rollback package on polish site: http://consumer.huawei.com/pl/support/mobile-phones/mates-pl-sup.htm
But after I did that it switched do C900.

Honor 5c L21 aka 7 lite

I update to B132 and I have some bug on this firmware
https://www.youtube.com/watch?v=1yVya1LV5IM
https://www.youtube.com/watch?v=-Mhg3hdcSq0
I want to dowgrade from nem-l21_c432b132 back to stock nem-l21_c432b100
I copy the dload and update.app B100 + *#*#2846579#*#* and press update, but is not working, i get update failed.
How can downgrade the firmware?

You got the update fail cause your version is higher than b100.
I think that if you want to downgrade you will have to download Full B100 not the OTA.
But I recommend if you want to do this use the b130 - I am using it and it is very good.
Do the whole procedurę through turned of phone: then VOL down and up together if I remember correctly.

I have try Full B100 not ota.
Not working.
Maybe some one know how to downgrade with fastboot?
nem-l21_c432b132 to nem-l21_c432b130 is working downgrade.
But i want nem-l21_c432b100

i try flashboot
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
fastboot flash system system.img
At fastboot flash system system.img i get failed
someone can help me?

@zzhunt This is an experimental method to go back to B100 by using OEMinfo. You do on your own risk! Required unlocked bootloader and installed TWRP (from Meticulus). Before performing make a full backup in TWRP.
1. Download here this package and put together of firmware B100 on the memory card,
2. Run and install in TWRP this package.
3. When finished install it, restart your smartphone to fastboot mode (Reboot>Bootloader)
4. Plug it into your computer and flash original recovery [LINK] a command "fastboot flash recovery recovery.img"
5. When you can flashed, then disconnect and hold power switch. When the informations will disappear from the display, immediately press the buttons Volume up and Volume down,
6. Will start the flashing system and after finishing restart your smartphone
7. Done!
I tested so far only on my device and don't know, what will happen with smartphone a different serial number/IMEI etc., but rather it should go.

@przemas2468 I can not flash twrp.
I get the same error: remote: command not allowed

zzhunt said:
@przemas2468 I can not flash twrp.
I get the same error: remote: command not allowed
Click to expand...
Click to collapse
Reverting back can be done by putting the full update in dload folder in sdcard. I have once got that error that u r talking about after the installing process completed. So i simply rebooted. And i got the stock one. So try this, just reboot and see.

@Shubho20 not working
https://www.youtube.com/watch?v=zLBrrrAJ1WQ&feature=youtu.be
I also go today to huawei service to flash the B100, and they can not flash.
They try but also not working

zzhunt said:
@Shubho20 not working
&feature=youtu.be
I also go today to huawei service to flash the B100, and they can not flash.
They try but also not working
Click to expand...
Click to collapse
What does ur dload folder contain? Only update.app?

yes

Shubho20 said:
What does ur dload folder contain? Only update.app?
Click to expand...
Click to collapse
And does the update process complete and then show that error?
---------- Post added at 03:30 PM ---------- Previous post was at 03:28 PM ----------
zzhunt said:
yes
Click to expand...
Click to collapse
In full stock firmware, after extracting it, there is dload folder. In dload folder there will be 2 folders and update app.

I try B100 firmware bulgaria and greece
On greece is only dload folder and update.app
And in bulgaria is 1 folder hw + update.app
http://postimg.org/image/w6e41dxet/
in hw folder is other folder EU and inside is update_data_hw_eu.app
I try with update.app + this folder.
Not working, at 5% fail install and start normal.

I want to go back to B100 because this updates B130-131-132 is junk for me.
Only problems i have
https://postimg.org/image/tkuz6g901/
https://postimg.org/image/4qbhcdo5t/
Double icons
Keyboard sometime freeze
https://www.youtube.com/watch?v=1yV..._comment_id=z131wfkqszjtzdi3l222x52jtmj0fpc3x
Fingerprint problems
This 3 updates for me is misery, only bugs i have

zzhunt said:
@przemas2468 I can not flash twrp.
I get the same error: remote: command not allowed
Click to expand...
Click to collapse
You have unlocked bootloader? If not, you'll have to unlock - here is a tutorial on how to do it. Then you flash TWRP and perform what I wrote previously.

for me b132 optimized alot battery life and ram usage. also gpu works better.

Huawei P9 Bricked

Hello.
I have a P9 with unlocked bootloader, TWRP and root and android 6 ( stock ).
By mistake, i flash in TWRP a custom rom of P9-lite.
Now, i can't enter in TWRP. I can't even flash stock rom with 3 buton method ( update.app in dload folder ).
With Vol - and Power, or Vol + and power, i only see the screens in attach.
I've tried flash with fastboot ( the only thing that works ) system.img, boot.img, cust.img and recovery.img ( extracted from the stock rom with Huawei update extractor) and nothing works.
I try various versions of TWRP, with no success.
Can anybody help me?

dload is not starting at all?
What was your last build?

use dc-phoenix and push update 15 credits (15 euros) then you can place a dload.app to your sdcard. ive done it and it worked just fine

kapas said:
Hello.
I have a P9 with unlocked bootloader, TWRP and root and android 6 ( stock ).
By mistake, i flash in TWRP a custom rom of P9-lite.
Now, i can't enter in TWRP. I can't even flash stock rom with 3 buton method ( update.app in dload folder ).
With Vol - and Power, or Vol + and power, i only see the screens in attach.
I've tried flash with fastboot ( the only thing that works ) system.img, boot.img, cust.img and recovery.img ( extracted from the stock rom with Huawei update extractor) and nothing works.
I try various versions of TWRP, with no success.
Can anybody help me?
Click to expand...
Click to collapse
Did you tried to flash from srk tool or in command prompt? What type of warning did yoy get?

xtcislove said:
dload is not starting at all?
What was your last build?
Click to expand...
Click to collapse
dload ( with update.app in the micro sd card, because i can't access the internal memory ) don't work at all.
The last build was C432B322 for the EVA-L09.

hiphoplife77 said:
Did you tried to flash from srk tool or in command prompt? What type of warning did yoy get?
Click to expand...
Click to collapse
How do i do that? I can only use fastboot ( flash recovery.img, boot.img, etc ), none of the adb commands work, it says " waiting for device ".

kapas said:
How do i do that? I can only use fastboot ( flash recovery.img, boot.img, etc ), none of the adb commands work, it says " waiting for device ".
Click to expand...
Click to collapse
You can use srk tool and also you can try 'fastboot flash system system.img' command. If pc cannot detect your device, you can do nothing. Just control that fastboot devices command. If adb says command not allowed, device may be locked ur bootloader. Try to unlock again. Check this 'fastboot oem get-bootinfo'

hiphoplife77 said:
You can use srk tool and also you can try 'fastboot flash system system.img' command. If pc cannot detect your device, you can do nothing. Just control that fastboot devices command.
Click to expand...
Click to collapse
Flashing system.img with fastboot i can do it, but the result is the same... i've tried manually and with srt tool....
And why can't i enter in TWRP?

kapas said:
Flashing system.img with fastboot i can do it, but the result is the same... i've tried manually and with srt tool....
And why can't i enter in TWRP?
Click to expand...
Click to collapse
Did you tried to flash all of the pieces of the firmware?

hiphoplife77 said:
Did you tried to flash all of the pieces of the firmware?
Click to expand...
Click to collapse
Just system, boot and recovery.... it's the same process to flash all files?
Ex: file 3RDMODEM.img "fastboot flash 3RDMODEM 3RDMODEM.img" ??

kapas said:
Just system, boot and recovery.... it's the same process to flash all files?
Ex: file 3RDMODEM.img "fastboot flash 3RDMODEM 3RDMODEM.img" ??
Click to expand...
Click to collapse
Yes just try it. Especially fastboot flash cust cust.img
If cannot, just flash them what you can and try dload method again and again.

I think most important is oryginal recovery
Wysłane z mojego EVA-L09 przy użyciu Tapatalka

hiphoplife77 said:
Yes just try it. Especially fastboot flash cust cust.img
If cannot, just flash them what you can and try dload method again and again.
Click to expand...
Click to collapse
Doesn't work....

kapas said:
Doesn't work....
Click to expand...
Click to collapse
Try these steps:
1. Flash stock recovery in fastboot mode.
2. Power off device by long pressing power button
3. wait about 1 minute
4. try dload
When you say dload doesn't work what do you mean? Nothing happens at all? or it fails mid update?

kapas said:
Doesn't work....
Click to expand...
Click to collapse
Have you ever tried hisuite repair? You have to lock your bootloader for hisuite.

lostunsunghero said:
Try these steps:
1. Flash stock recovery in fastboot mode.
2. Power off device by long pressing power button
3. wait about 1 minute
4. try dload
When you say dload doesn't work what do you mean? Nothing happens at all? or it fails mid update?
Click to expand...
Click to collapse
How can i flash it in fastboot?
The phone don't power off at all, I have tried to press power button, but always turn on.
When I try dload, nothing happens, o only get one of the screens in attach.
Sent from my D6603 using Tapatalk

hiphoplife77 said:
Have you ever tried hisuite repair? You have to lock your bootloader for hisuite.
Click to expand...
Click to collapse
Yes, i have tried with both locked and unlocked bootloader and also with stock recovery and with twrp, i receive the message that there aren't any files to my phone, to go to a Huawei service center.
Sent from my D6603 using Tapatalk

what was your last used rom?

darrr1 said:
what was your last used rom?
Click to expand...
Click to collapse
The last build was C432B322 for the EVA-L09.
Sent from my D6603 using Tapatalk

kapas said:
How can i flash it in fastboot?
The phone don't power off at all, I have tried to press power button, but always turn on.
When I try dload, nothing happens, o only get one of the screens in attach.
Sent from my D6603 using Tapatalk
Click to expand...
Click to collapse
Use the command "fastboot flash recovery recovery.img" obviously change the last bit to whatever you named your image file.