Hi there,
i own a Air III (M5C5). I want to switch to Windows 10, so i flashed bios 2.05 from mireks rom packages. This went totally wrong, some of you already know this ugly problem. Yesterday i found a post in a german forum, which fixed this problem for me:
http://www.android-hilfe.de/thema/teclast-x98-air-iii-boot-probleme-nach-bios-update.747401/page-3
I flashed the unbrick.7z from RafeGruber and thank god, it is running again (came from error: efilinux, could not find boot device handle). So thanks to RafeGruber.
However, i am not responsible for any bricking you do....! I am just reporting sucess in my case.
So, back to topic: i really want to install Windows 10 (with or without android). I know all the description for Air 3G and so on and i tried many thinks, but they did not work. So if somebody is reading this who has actually done it for his very own M5C5 (32gb), please post a short description with corresponding files....
Just for clear - this tool created by ionioni in januar. It was here - http://forum.xda-developers.com/x98-air/help/baytrail-dnx-mode-bios-flashing-tool-t3295105 before he quit.
blackbile said:
Just for clear - this tool created by ionioni in januar. It was here - http://forum.xda-developers.com/x98-air/help/baytrail-dnx-mode-bios-flashing-tool-t3295105 before he quit.
Click to expand...
Click to collapse
thanks for that info. however, noone has win10 on his M5C5 running?
i feared that much...
I don't know... I have Air 3G.
Related
Hi,
I do help someone can advise me. I am in the difficult position of having borrowed an O2 XGAii and having the hubris to try and upgrade the bios. The process failed and now the device is completely dead and wont respond in any way. The owner is asking for it back. Any clues on how I can fix it or even who I can take it too in Sydney, Australia to fix it for me?
Thanks in advance
erm i suppose u mean a xda2 or the xda2i?
as this is the forum for the xda2i
if the device is showing boot loader on the screen then just rerun the update but not on a pc running windows vista or it will fail, u have to use a xp or xp pro pc. you will find the bios updates in the forums, but make sure you are sure which pda you have.
Hi,
I got given a couple of Treo 750 phones. Both on the Optus Australian Network so I scratched around for days and found the upgrade software. Shows update 2.27
1st one went perfect.
2nd one on same computer got through copying files and executing update and stalled at the start of completing update.
I got the Windows mobile screen show and it just was not loading for ages. Previous one loaded and then asked for input of Date, touch screen settings etc.
The installer can be re run but says no USB connection at the moment.
I have done a hard reset and get the palm display then locks on the Windows Mobile screen.
I saw procedures to use the Mini SD card but the cards I have won't work in any treo, they are not SDHC type but standard 2G ones.
I next found the recovery tool but holding the left lower button and then hitting reset did not work but does work on my good phone where it shows the coloured bars and SPL....
The left button is a bit dodgy so I suspect it may be faulty. Is there anything else I can try?
EDIT: Ok I pulled apart the phone, looks like it had a hard life as broken case around two screws and they would not unscrew easily. Found the tiny button had dry solder joints. Fixed that up and was able to recover using the reset proceedure.
Phone now working.
could you explain in more detail what you did. thanks man
webafile said:
could you explain in more detail what you did. thanks man
Click to expand...
Click to collapse
What would you like to know?
Once I physicaly repaired the phone as indicated in the edit I was able to hold the left hand button (which was faulty) and the reset at the same time that allowed me to get into the SPL mode and recover the phone.
I understand it very little and most posts on these forums are over my head.
I would like windows 6.1 but there is so much information that seems to conflict that I don't know I am game since it is now working on an official 6.0 Optus version.
I am happy to help but if you can maybe tell me where you are at the moment and what you want to acheive and what you have tried I hope I can fill in the gaps for you.
because im new to this to and i got stuck in the windows screen also. so i would like to know what to download and where from and step by step if you could please.
thanks man
webafile said:
because im new to this to and i got stuck in the windows screen also. so i would like to know what to download and where from and step by step if you could please.
Click to expand...
Click to collapse
Ok to start with what country are you in and what telco were you with eg Vodafone etc as you will need that as a start.
USA and im with AT&A
Try the method describe in the thread below - Mine work
Hi, you might want to try this method
Follow it one by one and do not skip a step
http://forum.xda-developers.com/showthread.php?t=460783
I just did mine last Saturday (it was a Vodafone phone)
AT&T should be easier since the Windows 6 ROM is easier to get
If you'd like to update to WM 6.1, you should upgrade first to WM 6
Something i read about the radio not working to full capacity if you upgrade straight to 6.1
As for the WM 6 ROM, i'm sure you can find it
Good luck
Hi All,
I have a Treo 750 and it WAS running WM 6.0 Professional (OFFICIAL) and I got it onto the phone and then tried to install WM 6.5 and then I downgraded to 5.0 and tried to update back to 6 and it bricked my treo, any of you wonderful xda ppl have any solution?
Also, I have tried installing the ROM again (via SD updater) and it looks like this:
SPLASH1 OK
BOOTLOAD OK
GSM OK
Micro P OK
EXTROM FAIL
OS
Update Terminate
UPDATE FAIL
I cant install the windows installer one as WMDC 6.1 or ActiveSync 4.5 WILL NOT show the device up on the computer. I have Windows Vista Home Basic, and when I tried MTTY, the only ports I get are COM1, COM2, and COM3. I can't get the usb to show up. Even with MTTY 0.01 when I got the USB connection, it would not open. Is it Vista? Or am I not doing it right? ANY HELP WOULD BE APPRECIATED TO GET MY POOR TREO BACK!!!!!!!!!
Thanks
~Mike
Try this?
http://forum.xda-developers.com/showthread.php?t=427519
simunlocktreo said:
Try this?
http://forum.xda-developers.com/showthread.php?t=427519
Click to expand...
Click to collapse
Is this universal (i.e. Hermes/BA/Trinity) or just for the Treo 750. I think what bricked it in the first place was installing a custom rom by veisen (WM 6.5)
~Mike
Didnt Work
That one thing didn't work. It keeps coming up ERROR 226: FLASH WRITE ERROR Anything else???
~Mike
Hi guys,
first of all, thank you for this awesome forum. I've been a frequent visitor in this forum and I've already found a lot of useful tips but now I need your help because I don't know what to do anymore.
First of all a brief explanation: I'm using a Kaiser (German Vodafone branding). My old device has been replaced by Vodafone due to a hardware defect. Vodafone gave me completely new device with the following data:
Windows Mobile 6.1 Prof
CE OS 5.2.19122 (Build 19122.1.0.3)
ROM-Version: 3.28.162.2 GER (this is the latest version)
I used exactly the same version on my old device and the program mentioned above Go Suite v. 0.91 does not work with my new Kaiser anymore, however it worked great with my old device. Go Suite requires two further programmes in order to run:
Go Suite v.0.91 (GoSuite.ARMV4.cab - can be downloaded here
netcf.all.wce4.ARMV4.cab
PocketGnuGo.ARMV4.cab (also downloadable on the same website)
I followed the installation manual step by step but it still doesn't work. I've tried everything possible to get the software started. However, this was the first program I installed on my Kaiser (well, I tried).
If you need further information feel free to ask me. Neither Go Suite nor Windows show any error reports, only the launching symbol shows up for a couple of seconds after clicking on the icon.
I'm sorry that I can't give you more detailled information about the error. Is there any tool or a possibility to get to read the Windows error report? If you know one, just let me know where to get it and I'll deliver further details.
I hope you can help me - I'm sort of desperate since I really need this programme and I don't know what to do.
Thank you!
Harald
Harald Kilian said:
Hi guys,
first of all, thank you for this awesome forum. I've been a frequent visitor in this forum and I've already found a lot of useful tips but now I need your help because I don't know what to do anymore.
First of all a brief explanation: I'm using a Kaiser (German Vodafone branding). My old device has been replaced by Vodafone due to a hardware defect. Vodafone gave me completely new device with the following data:
Windows Mobile 6.1 Prof
CE OS 5.2.19122 (Build 19122.1.0.3)
ROM-Version: 3.28.162.2 GER (this is the latest version)
I used exactly the same version on my old device and the program mentioned above Go Suite v. 0.91 does not work with my new Kaiser anymore, however it worked great with my old device. Go Suite requires two further programmes in order to run:
Go Suite v.0.91 (GoSuite.ARMV4.cab - can be downloaded here
netcf.all.wce4.ARMV4.cab
PocketGnuGo.ARMV4.cab (also downloadable on the same website)
I followed the installation manual step by step but it still doesn't work. I've tried everything possible to get the software started. However, this was the first program I installed on my Kaiser (well, I tried).
If you need further information feel free to ask me. Neither Go Suite nor Windows show any error reports, only the launching symbol shows up for a couple of seconds after clicking on the icon.
I'm sorry that I can't give you more detailled information about the error. Is there any tool or a possibility to get to read the Windows error report? If you know one, just let me know where to get it and I'll deliver further details.
I hope you can help me - I'm sort of desperate since I really need this programme and I don't know what to do.
Thank you!
Harald
Click to expand...
Click to collapse
tytn 2 ultimateXv9. your apps working.
Good evening:
First, sorry for my bad english. I didnt know this forum until I had to dip into it, but I have read many posts and I find a place where there are people who know a lot about these issues and are saviors of people like me who only know of these issues.
I bought a Teclast x98 Air iii 32GB (M5C5) as a gift for my girlfriend for Christmas. I discovered that I could remove all Chinese applications and gain some performance by changing the ROM, and got satisfactory. But I went further and saw that he could do dual boot despite being the 32GB version. So I installa the dual Bios 2.02. So I got. But here's the problem:
The tablet is constantly restarts remaining in the screen logo with Chinese letters. I connected a keyboard to the tablet to access the BIOS to see what I could do, but I have not achieved anything. I try to flash with flash ROM Android IMT I installed the first time (with all types of wipes, changing partition tables and so on) and when loaded FlashBoot error "could not find boot device appears handle me teclast "but continuous flashing (giving others more errors in the tablet), but ends correctly (in the IMT out the green bar) and restarts. Upon restart, we return to the same, constant restart and I get nothing.
Can I flash once again other BIOS? How? Because I cant boot any SO.
I'm starting to despair because I've read English, Chinese, Spanish forums and even Italian, and no, I'm stuck and I do not wanna (if it isnt yet) turn the tablet into a brick. It going to be the most expensive Christmas gift
Thank you very much in advance who can shed me some light to solve this bundled I have done.
Greetings.
Did you find solution?
I am experiencing similar problem. Did you find solution?
BIOS/Firmware 2.02 is NOT for X98 air III but for X98 Air II or 3G only.
Now your best bet is to put back the original Firmware or another one that is fully compatible this time.
If you can't boot at all the only way to unbrick your X98 will be with the CH341A programmer, you can use my tutorial for X98 Air II 3G but again use a firmware compatible with the Air III. :angel:
Tutorials, links and Files are in my signature below.
Regards !
There is a M5C5 unbrick thread (or C5J8 posted by me) here too. Read these.
Maybe if you have DNX mode you could try to reflash the original BIOS.
Hello, first sorry for my bad English. I have a x98 air 3g c5j6 and starts only in the bios. I read that you can reinstall the bios from DNX but I've only seen that can be from the c5j8 and m5d5. It can be done for my tablet?
Thanks for the help
read this, there is a link for the universal DNX tool - if you have the original BIOS!!!:
http://forum.xda-
developers.com/x98-air/help/air-iii-m5c5-unbrick-bios-mess-t3356339/post66337419#post66337419
blackbile said:
read this, there is a link for the universal DNX tool - if you have the original BIOS!!!:
http://forum.xda-
developers.com/x98-air/help/air-iii-m5c5-unbrick-bios-mess-t3356339/post66337419#post66337419
Click to expand...
Click to collapse
Thanks for the reply but the post of ionioni has been deleted and can not find any place where this explained
From what I've read this problem usually occurs when updating the BIOS but I still have the original BIOS 1.07