CM12 - Samsung Galaxy Mini

I ported cm12 for our SGM2 but i dont know that it works. test it by yourself and tell me if it works!
Link: http://www.mediafire.com/download/t3355rh7j0jca2q/cm-12.1-20160425-UNOFFICIAL-jena.zip
Gapps: opengapps.org ( pick arm>> android 5.1 >> pico )(51MB I think )
(because the system partition has only 497.19MB i think)
Install method:
download the rom and the gapps.
download and install the v3 stable cwm recovery( credits @simokb1996) Link: http://forum.xda-developers.com/galaxy-mini/mini-2-dev/cwm-6-0-5-1-galaxy-mini-2-s6500-t3201861
put the files into internal or external storage and boot into recovery.
do a nandroid backup!!
wipe data/factory reset
install rom
install gapps
reboot and see if it works
when it isnt working then just write to me: [email protected]
thanks,

Good Luck and looking forward
Nexus 4 ❤

#Malpa73 said:
Good Luck and looking forward
Nexus 4
Click to expand...
Click to collapse
thanks,i made the rom but i can t test it because i am really busy today iwill test it and upload it tomorrow

xEmre66 said:
thanks, i made the rom i'm now testing it it is on cm12 bootanimation i will upload it tomorrow !
Click to expand...
Click to collapse
Ok, I was there the will to refine CM10.1 Improved, mainly kernel And if all goes well this week to hit the XDA
How will the already launched it willingly after testing This is version 5.0 or 5.1.1?
Nexus 4 ❤

#Malpa73 said:
Ok, I was there the will to refine CM10.1 Improved, mainly kernel And if all goes well this week to hit the XDA
How will the already launched it willingly after testing This is version 5.0 or 5.1.1?
Nexus 4
Click to expand...
Click to collapse
It's Android 5.1.1. Yesterday I tried to Boot it Booted up. I tested it and it works but the camera doesn't work.

It's uploading now!!!!!!!! I cant test it because my mini 2 charging port not working......
Test it by yourself and say me thats working or not please. When not working I'm gonna fix it.

xEmre66 said:
It's uploading now!!!!!!!! I cant test it because my mini 2 charging port not working......
Test it by yourself and say me thats working or not please. When not working I'm gonna fix it.
Click to expand...
Click to collapse
I will write the link now when its uploaded on mediafire.

xEmre66 said:
I will write the link now when its uploaded on mediafire.
Click to expand...
Click to collapse
I uploaded it. you can download it

xEmre66 said:
I ported cm12 for our SGM2 but i dont know that it works. test it by yourself and tell me if it works!
Link: http://www.mediafire.com/download/t3355rh7j0jca2q/cm-12.1-20160425-UNOFFICIAL-jena.zip
Gapps: opengapps.org ( pick arm>> android 5.1 >> pico )(51MB I think )
(because the system partition has only 497.19MB i think)
Install method:
download the rom and the gapps.
download and install the v3 stable cwm recovery( credits @simokb1996) Link: http://forum.xda-developers.com/galaxy-mini/mini-2-dev/cwm-6-0-5-1-galaxy-mini-2-s6500-t3201861
put the files into internal or external storage and boot into recovery.
do a nandroid backup!!
wipe data/factory reset
install rom
install gapps
reboot and see if it works
when it isnt working then just write to me: [email protected]
thanks,
Click to expand...
Click to collapse
well this is'nt the right place to upload your thread
you can upload it to the developement thread to fix bugs and errors

simokb1996 said:
well this is'nt the right place to upload your thread
you can upload it to the developement thread to fix bugs and errors
Click to expand...
Click to collapse
+but i cant write there i need higher post count it says when i try that

xEmre66 said:
+but i cant write there i need higher post count it says when i try that
Click to expand...
Click to collapse
ah ok i interstand now
you build contains a lot of errors you just ported from pico
it does'nt build from source and it gave problems in recovery
because the recovery can handle just cm11 but the updater-script in cm12.1 need a cm12.1 recovery

recovery
How can I build a CM12.1 recovery? @simokb1996

recovery
How can I build a CM12.1 recovery? @simokb1996

xEmre66 said:
How can I build a CM12.1 recovery? @simokb1996
Click to expand...
Click to collapse
you build cm12.1 from source or you just port it ????
you have to build recovery from source
you need lunix like ubuntu or fedora to build android

simokb1996 said:
you build cm12.1 from source or you just port it ????
you have to build recovery from source
you need lunix like ubuntu or fedora to build android
Click to expand...
Click to collapse
My mini 2 is here from the repairing station and now i tested it it is booting now its on the bootanimation...

Hello, i have a problem with Cyanogenmod 12.1 When I want Install this ROM, It shows an error executing updater binary in TWRP 2.8.5.0. What should I do?
PS: Sorry for my bad English

wiki3007 said:
Hello, i have a problem with Cyanogenmod 12.1 When I want Install this ROM, It shows an error executing updater binary in TWRP 2.8.5.0. What should I do?
PS: Sorry for my bad English
Click to expand...
Click to collapse
@wiki3007 Yes, I know it. I will fix this soon and update the links. It gives always an error. What exactly is the error? Is it saying "error executing updater binary"???

Yes, that's error
Sent from my GT-S6500D using XDA Free mobile app

I think i fixed the rom. i cant test it because my mini 2 fall into water and now it is in rice for 2 days i test it after 1 week.........
Maybe you can test it and tell me... when my phone works i will build a fully working cm12.1..................................................................
i will upload it now

Fake cm12, this cm11 rom
Sent from my B1-730HD using XDA Free mobile app

Related

[ROM][PORT]MIUI V4 base CM9 BETA 4 MACLAW- RELEASED! [17.03.2012]

Hi friends, as maclaw released the beta 4, I thought I would try something new. As everyone's busy here and I had some time in my hands, I ported the MIUI V4 ROM with base as MACLAW'S CM9.
Working:
boot
GSM (phone/messages/GPRS/EDGE/3G)
Wifi
Bluetooth
HW acceleration (full)
Sound
Headphones
GPS
All sensors (proximity, roration etc)
Market (now you can download all apps available for Galaxy mini with GB)
Fixed animations (now it looks so good)
Facebook sync
Buttons backlight
BLN support
GMail fully works
Browser fully works
ICS keyboard
Games - works as smoothly as on Gingerbread
YouTube(stuttering problem exists)
Deep sleep
Wifi signal indicator.
Annoying problems:-
Flicker(Screen not updating as fast as it should)
Video acceleration
THIS ROM IS BASED ON MACLAW'S CM9 SO IT'LL HAVE THE SAME ISSUES OF HIS ROM.
How to Flash ROM :
Download and copy the zip file downloaded to SD Card
Reboot to Recovery Mode
Select Wipe data and cache
Select install zip from sd card
Select choose zip from sd card
Select the zip file downloaded
Select Yes - Install update
Wait till the Installation is finish
Select Wipe data and cache
Select Wipe cache partition
Select reboot system now
Thanks to:
Maclaw for his wonderful ROM
bravovn for continuing his work on MIUI
Please refer to bravovn's thread for screenshots.
http://forum.xda-developers.com/showthread.php?t=1521241
I am using stock ROM now so cannot test it again before uploading. If there's problem with the file please inform I'll correct and upload.
Download:
http://www.4shared.com/zip/Ea6D05wk/MIUI.html
Annoying problems:-
Flicker(Screen not updating as fast as it should)
Video acceleration
Click to expand...
Click to collapse
Hopely they will get fixed asap ^^
Great job!
Will release tomorrow.
SyAdmin said:
Hopely they will get fixed asap ^^
Great job!
Click to expand...
Click to collapse
Maclaw said he is working on video accelerators. He also said its a hard work and will take time so hope we will geta fix soon
Rom uploaded. Go get it guys!!
how about the camera?
Boss.bhavesh2 said:
Rom uploaded. Go get it guys!!
Click to expand...
Click to collapse
still downloading....
thank's buddy
4shared says we've got to sign up to download the file...
vishal007 said:
Maclaw said he is working on video accelerators. He also said its a hard work and will take time so hope we will geta fix soon
Click to expand...
Click to collapse
A couple of days ago Qualcomm released the Adreno 200 driver for ICS, as this is the GPU used by the Mini it might help resolve the stuttering issues:
https://developer.qualcomm.com/deve...phics-optimization-adreno/tools-and-resources
Adripeg said:
4shared says we've got to sign up to download the file...
Click to expand...
Click to collapse
Sorry bro but 4shared allowed resumable upload so I uploaded on it. If someone can create mirrors, I don't have problem with it. My upload speed is only 13KB/s so its a pain to upload large files.
PS: Guys let me know if the Rom is working fine or not.
Boss.bhavesh2 said:
If someone can create mirrors, I don't have problem with it.
Click to expand...
Click to collapse
Ok, I'm uploading to Mediafire now. I go to sleep, when I wake up I'll give you the link
what about scrrenshots? i think u shud post smm on the post
thanks manfor your work.
i want to report bug i hope you can fix it:
in call my vocie can't send to other but can here in coming voice.
camera can't launche.
other thing is okey.
sorry for my bad english
adib_17 said:
thanks manfor your work.
i want to report bug i hope you can fix it:
in call my vocie can't send to other but can here in coming voice.
camera can't launche.
other thing is okey.
sorry for my bad english
Click to expand...
Click to collapse
Please wait for maclaw to release a more stable version. As soon as a new version is out I'll port it.
Here you have. I don't know why, but MF was giving me a lot of errors...
http://www.mediafire.com/?sdo99l1b3jevy6f
Just flash with stock recovery..? I like it but my laptop is broken.. T.T
Sent from my GT-S5570 using xda premium
wan903 said:
Just flash with stock recovery..? I like it but my laptop is broken.. T.T
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
You can't flash custom roms on stock recovery. You need cwm.. Download the latest cwm by squad. Should be in zip format. Move it to the root of your sdcard. Boot to stock recovery. Choose install/apply update, look for the cwm zip, confirm install. Reboot recovery and you're good to go.. You can flash this rom or any other custom rom.. But remember, you must at least have GB 2.3.4 to flash custom roms..
Sent from my GT-S5570
Nice work man
Tis awesome!
Sent from my GT-S5570 using XDA
Dear Mr. Bhavesh
ROM is good. Thanks.
When I change the theme, some icons are not changing to that theme. (not only in
your Build, other miui roms also).
My steps are'
I have created the folder is as follows,
1. Storage card/Miui/themes and have copied all themes in this
2. Created theme folder in data/system/theme
Are this ok ?
Can you please help ?
Thanks.
Sorry. double post.

[CUSTOM RECOVERY] TWRP 2.8.7.0(for lollipop)

TWRP 2.8.7.0​
Download:
For installing via odin - ftp://109.87.84.155/Samsung_SM-G530H/Recovery/TWRP/2.8.7.0/TWRP_2.8.7.0_Lollipop.tar
For installing via recovery - ftp://109.87.84.155/Samsung_SM-G530H/Recovery/TWRP/2.8.7.0/TWRP_2870_Samsung_SM_G530H.zip
Developer - Jemmini
.
finally
posting results later
.
Will this work fine on smg530az on 4.4.4
Sent from my SAMSUNG-SM-G530AZ using XDA Free mobile app
WinKarbik said:
Hi all, one of the developers on 4pda compile a new recovery for android 5
TWRP 2.8.7.0​
Download: ftp://109.87.84.155/Samsung_SM_G530H/Recovery/TWRP/2.8.7.0/TWRP+2.8.7.0+Lollipop.tar
Developer - http://4pda.ru/forum/index.php?showuser=4873506
Click to expand...
Click to collapse
:fingers-crossed::fingers-crossed::laugh: great!!!
and root without tripping knox? That will be awesome!!!!!!
Pd.Chal said:
.
finally
posting results later
.
Click to expand...
Click to collapse
did you check this recovery?
its working fine
how to flash this tar file? (if with odin, what i must to check AP, csc..)
miroslavpavlo said:
how to flash this tar file? (if with odin, what i must to check AP, csc..)
Click to expand...
Click to collapse
Put tar file to AP.
Sent from my SM-N9005 using Tapatalk
---------- Post added at 04:22 PM ---------- Previous post was at 04:21 PM ----------
WinKarbik said:
Hi all, one of the developers on 4pda compile a new recovery for android 5
TWRP 2.8.7.0​
Download: ftp://109.87.84.155/Samsung_SM_G530H/Recovery/TWRP/2.8.7.0/TWRP+2.8.7.0+Lollipop.tar
Developer - http://4pda.ru/forum/index.php?showuser=4873506
Click to expand...
Click to collapse
I nees philz touch recovery for lp. (I want it mass storage )
Sent from my SM-N9005 using Tapatalk
Do you need a rooted device if you want to install recovery ?
TWRP problem not restart after flash file.?
How can fix problem.
Thx you share.
Could not flash!
kn06497 said:
:fingers-crossed::fingers-crossed::laugh: great!!!
Click to expand...
Click to collapse
Pd.Chal said:
.
finally
posting results later
.
Click to expand...
Click to collapse
when ever am tryin to flash the recovery via odin.. it showing a error msg. as failed! and in the phone is showing! custom recovery blocked by fap lock! Any suggetions? how to solve this?
How to use this?
WinKarbik said:
Hi all, one of the developers on 4pda compile a new recovery for android 5
TWRP 2.8.7.0​
Download: ftp://109.87.84.155/Samsung_SM_G530H/Recovery/TWRP/2.8.7.0/TWRP+2.8.7.0+Lollipop.tar
Developer - http://4pda.ru/forum/index.php?showuser=4873506
Click to expand...
Click to collapse
Im new here and i already flashed it. I can also accessed it but i dont know how to use it.
Goal: I want to root my Android 5.0.2 Lollipop.
Unit: G530H
Thanks!
how did u flash it bro? mine is showing something fap lock! how did u do it?
[USB Mount] Not working
WinKarbik said:
Hi all, one of the developers on 4pda compile a new recovery for android 5
TWRP 2.8.7.0​
Download: ftp://109.87.84.155/Samsung_SM_G530H/Recovery/TWRP/2.8.7.0/TWRP+2.8.7.0+Lollipop.tar
Developer - http://4pda.ru/forum/index.php?showuser=4873506
Click to expand...
Click to collapse
Hi, mounting is not working for me. I already installed the right usb driver then tried again but no good.
PS: Awaiting reply.
Issue on XXU model : The recovery is unable to reboot the device, whenever I press "reboot system" it stucks at the screen then I have to remove the battery to restart.
the links are broken or fallen please upload again..
I have pleaded with the OP to correct the link..but that one must have moved on..lol
For SM-G530H on LP..Dont know which version of LP thow..isnt compatible with my G531M on 5.1.1..maybe soon..someone will work something up for the M..lol
Here is my personal copy in (tar) format.. >> https://drive.google.com/file/d/0Bzr_08QESKW4SW9lZUg2ODUxWEE/view?usp=docslist_api
sent by my: SM-G531M Grand Prime
(Lollipop 5.1.1)
Ive created a buckup with this its great but still its buggy when trying to reboot nothing happens
android17and18 said:
Ive created a buckup with this its great but still its buggy when trying to reboot nothing happens
Click to expand...
Click to collapse
Well..thats a start..but..seems this thread has been forgotten..I'm sure there is more development with this..just another thread..lol
I hope, my file link helped..isnt compatible with my device varient..
sent by my: SM-G531M-88 Grand Prime (or)
my: SM-N910C Note 4 (Lollipop 5.1.1)

[ROM][UNOFFICIAL]CM 11 for Galaxy Y Duos[BETA][TWRP]

CM 11 Unofficial For GT-S6102​
This is not my creation the entire credits go to guys at dzb. This thread is created to make gt s6102 users and devs aware of such a rom. I see that this device is well... Dead. But still anyone has the effort to make this rom stable feel free to do so. This is only for Devs!!.
And i am not responsible for anything that happend to you or your device following my instructions.
BUGS:​
WiFi - WiFi works in BETA v4 but sometimes it switches off and comes back on.
Offline Charging - doesn't work
RIL - doesn't work.
Charging - very very slow ( probably kernel's problem )
Camera - Not Working.
HW - Red and blue interchange in BETA v4.
Some other small bugs
How To Install:​
Make sure you are using stock rom.
Download Temporary CWM 5.xx or install CWM.
Flash TWRP.
Reboot Recovery.
Go to wipe->Advanced wipe->Wipe everything EXECPT Sd Card.
Next go to mount and mount everything.
Then flash cm11 BETA v4
Hopefully you received no errors so reboot and wait for 10 min.
FAQ:​
Q: I can't flash a gingerbread rom after this.
A: Use ODIN and reflash the frimware.
Downloads:​
1. CM 11 Beta V4:[url]https://depositfiles.com/files/309pqj4cy[/URL]
2.Temporary CWM:[url]http://forum.xda-developers.com/showthread.php?t=1611830[/URL]
Source:​
https://github.com/DZB-Team/android_device_samsung_torino_cm11
Credits:​
To team dzb. And to Mohammed Afaneh ( For twrp) . DZB is not developing this anymore. Any devs who can support them will be appreciated.
For more info go to DZB Blog and forum.
Dzb LINKS: BLOG: http://blog.7dzb.com/sgydrom/
FORUM: http://forum.7dzb.com/
If you want twrp after flashing the rom just flash twrp again (Works only for beta v4)
can u please post screenshots
[email protected] said:
can u please post screenshots
Click to expand...
Click to collapse
DZB webpage got SS. I got twrp. Thanks to mommamed afaneh. I will update the thread. :good:
[email protected] said:
can u please post screenshots
Click to expand...
Click to collapse
Check out cm11 bro.. :good:
SSNJR2002 said:
DZB webpage got SS. I got twrp. Thanks to mommamed afaneh. I will update the thread. :good:
Click to expand...
Click to collapse
IT is not working when i flash it,it says
" this package is for"torino,GT-s6102"devices;this id a "tortoro".
E:Error in /sdcard/TWRP-2.8.7.0-torino.zip (status 7)
Installation aborted."
WHAT IS IT.
[email protected] said:
IT is not working when i flash it,it says
" this package is for"torino,GT-s6102"devices;this id a "tortoro".
E:Error in /sdcard/TWRP-2.8.7.0-torino.zip (status 7)
Installation aborted."
WHAT IS IT.
Click to expand...
Click to collapse
Thread updated now check it out. My mistake
SSNJR2002 said:
Thread updated now check it out. My mistake
Click to expand...
Click to collapse
you know what.i bricked my phone because of that TWRP-2.8.7.0-torino.zip.
FIRST i flashed CM9 then by cwm i flashed the .zip file. And guess what it flashed succesfully , i rebooted recovery and i was in TWRP recovery,but sadly now i tried to flash a ROM from CWM it was not able to do it.when i tried to mount system it is NOT mounting,the same is with cache,data.not able to flash any ROM.
BUT when i tried to flash YOUR second ZIP of TWRP i found that it is saying:-
" this package is for"tortoro,GT-S5360"devices;this id a "".
E:Error in /sdcard/TWRP-2.8.7.0-torino.zip (status 7)
Installation aborted.":crying:
post anything only after TESTING it carefully.
[email protected] said:
you know what.i bricked my phone because of that TWRP-2.8.7.0-torino.zip.
FIRST i flashed CM9 then by cwm i flashed the .zip file. And guess what it flashed succesfully , i rebooted recovery and i was in TWRP recovery,but sadly now i tried to flash a ROM from CWM it was not able to do it.when i tried to mount system it is NOT mounting,the same is with cache,data.not able to flash any ROM.
BUT when i tried to flash YOUR second ZIP of TWRP i found that it is saying:-
" this package is for"tortoro,GT-S5360"devices;this id a "".
E:Error in /sdcard/TWRP-2.8.7.0-torino.zip (status 7)
Installation aborted.":crying:
post anything only after TESTING it carefully.
Click to expand...
Click to collapse
You tried to flash cm 11 beta v4 right?? No other roms will work. Anyway im going to test it properly and will update the thread.
[email protected] said:
you know what.i bricked my phone because of that TWRP-2.8.7.0-torino.zip.
FIRST i flashed CM9 then by cwm i flashed the .zip file. And guess what it flashed succesfully , i rebooted recovery and i was in TWRP recovery,but sadly now i tried to flash a ROM from CWM it was not able to do it.when i tried to mount system it is NOT mounting,the same is with cache,data.not able to flash any ROM.
BUT when i tried to flash YOUR second ZIP of TWRP i found that it is saying:-
" this package is for"tortoro,GT-S5360"devices;this id a "".
E:Error in /sdcard/TWRP-2.8.7.0-torino.zip (status 7)
Installation aborted.":crying:
post anything only after TESTING it carefully.
Click to expand...
Click to collapse
Thread updated. Extremely Sorry man! Im sure it will work all right now.:good:
SSNJR2002 said:
Thread updated. Extremely Sorry man! Im sure it will work all right now.:good:
Click to expand...
Click to collapse
no need to be sorry these small problems happen in devs. and i have repaired my phone.:victory:
[email protected] said:
no need to be sorry these small problems happen in devs. and i have repaired my phone.:victory:
Click to expand...
Click to collapse
Yep im trying to make cm11 stable as possible.
SSNJR2002 said:
Yep im trying to make cm11 stable as possible.
Click to expand...
Click to collapse
good luck bro
Sent from my XT1562 using XDA-Developers mobile app
can i do calling in this ROM.
[email protected] said:
can i do calling in this ROM.
Click to expand...
Click to collapse
Nope ril is not fixed. And incoming and outgooing calls dont work.
bro can u please tell me how to get google play store in this ROM.i installed play store but it is not working.
and one thing that the ROM is working very well.i have modded it also and its really very great.
THANKS FOR POSTIN THIS ROM
[email protected] said:
bro can u please tell me how to get google play store in this ROM.i installed play store but it is not working.
and one thing that the ROM is working very well.i have modded it also and its really very great.
THANKS FOR POSTIN THIS ROM
Click to expand...
Click to collapse
Yeah it is incomplete try microg ( by marvin @ xda)
Delete this post, mods
Thanx pro everything works This Very goood Rom
But.... Where's GApps file
MohamedEesa11 said:
Thanx pro everything works This Very goood Rom
But.... Where's GApps file
Click to expand...
Click to collapse
I think this might work : http://www.mediafire.com/?6do6x71t63kcj3o please tell me whether it works or not

[rom][fix script]Miuiv7 test version

HI guys heres miui mm based test version
Noob stay away from this thread
1.u should have twrp
2.stock rom backup if something wrong
3.and knowledge od taking logcat for bugs and any other problems
Installation
1.reboot recovery
2.flash the zip if theres no error flash rom with wipes
2.reboot wait for 10-15 mins
rom download - https://drive.google.com/file/d/0B9nu7Uret6OkYktCOEhsNWxoalU/view?usp=drivesdk
https://drive.google.com/file/d/0B9nu7Uret6OkRFpCVkRtRTZMc3M/view?usp=sharing replace this meta-inf com google androi folder
I can text it @yash989 but dont have pc to take logs . But i think what are an app to take logs but need that rom bot obviusly.. what version exactly? Can you port miui 8 ?
xdddd23 said:
I can text it @yash989 but dont have pc to take logs . But i think what are an app to take logs but need that rom bot obviusly.. what version exactly? Can you port miui 8 ?
Click to expand...
Click to collapse
U need PC if any error u can take logcat with pc
can you publish your work on github or somewhere else? i am porting roms to lenovo k920 which is nearly the same device, maybe i could help
Sent from my K920 using Tapatalk
Great to see someone is porting MIUI! Good luck and thank you!
Hi can i try this for you? Ty
Enviado desde mi Z1 mediante Tapatalk
I am waiting for this ROM I will help u plzzz send me the links ......?
Hiii
Hi there ... is the ROM been checked or not yet..?
Waiting for miui guys???
I'll be a tester! I know how to take debug logs.
Downloads links are added
yash989 said:
Downloads links are added
Click to expand...
Click to collapse
Great! I will download and test it
MrWhite98 said:
Great! I will download and test it
Click to expand...
Click to collapse
Make sure u backup ur rom in case some problems
yash989 said:
Make sure u backup ur rom in case some problems
Click to expand...
Click to collapse
Sure thing. Also, will you be able to port MIUI8 in the future?
I will report any bugs or errors I find, thanks again!
MrWhite98 said:
Sure thing. Also, will you be able to port MIUI8 in the future?
I will report any bugs or errors I find, thanks again!
Click to expand...
Click to collapse
Yeah if this is stable it will be easy for v8
yash989 said:
Yeah if this is stable it will be easy for v8
Click to expand...
Click to collapse
Great, thanks!
I will also flash and test it tomorrow and report any bugs thanks for new rom
I couldn't run it. It stuck at booting...
MrWhite98 said:
I couldn't run it. It stuck at booting...
Click to expand...
Click to collapse
What u mean boot animation?
But in telegram group people said there's updater script error can't flash rom
How u flashed the rom than?
MrWhite98 said:
I couldn't run it. It stuck at booting...
Click to expand...
Click to collapse
Give me Logcat also - http://forum.xda-developers.com/showthread.php?t=2274119
yash989 said:
What u mean boot animation?
But in telegram group people said there's updater script error can't flash rom
How u flashed the rom than?
Click to expand...
Click to collapse
Means the rom is not working?

[rom][gt-p31xx][ios][4.4.4]ios 9 port

Sorry but now i feel i have been doing this all wrong.. THANK YOU GUYS FOR ALL YOUR SUPPORT NOW I AM OUT OF THIS THING GOT SOME OTHER PLANS TO THINK ? FURTHER.
Tried it on my p3110
Unfortunately, the rom did not boot.
Description of what I did:
After a full wipe, I flashed the zip and I got an error "some symlinks failed" (logs attached)
I rebooted recovery and then flashed it again without wiping anything in the meantime. This time it flashed fine and I got the result "Now install the GAPPS........". I rebooted system and I got stuck at the boot logo.
Hope I helped.
EDIT: Just out of curiosity, why to install gapps in IOS?
Tested on p3110
Got stuck on boot loading screen too with a dead android figure
fabiond said:
Got stuck on boot loading screen too with a dead android figure
Click to expand...
Click to collapse
If you read the OP, you would know this ROM requires TWRP 3.0.3-0 and newer
Symlinks failed, the same as CM14.1
NEED HELP
Sorry for all the error going on there the problem is the updater script i cant look into this because my exams are going can anyone help me to make this rom a daily driver....
PM me..
Wow, another one using my Roms as base without permissions... What's wrong here on XDA?!
Kunal Gautam said:
Sorry for all the error going on there the problem is the updater script i cant look into this because my exams are going can anyone help me to make this rom a daily driver....
PM me..
Click to expand...
Click to collapse
you want a daily driver??
its easy!!
take your base rom, the slimkat builded by @Android-Andi and let it as it is. install it!! then you have your daily driver
Kunal Gautam said:
Sorry for all the error going on there the problem is the updater script i cant look into this because my exams are going can anyone help me to make this rom a daily driver....
PM me..
Click to expand...
Click to collapse
Can you make it for gt-p5113? Because once again I dont have a galaxy tab 2 7.0
Android-Andi said:
Wow, another one using my Roms as base without permissions... What's wrong here on XDA?!
Click to expand...
Click to collapse
Hi! I need to tell you something. Can I talk with you on a private chat or something else?
P.D: Sorry for use your ROMs without permissions
Android-Andi said:
Wow, another one using my Roms as base without permissions... What's wrong here on XDA?!
Click to expand...
Click to collapse
I thought you discontinued slimkat for p3100 (not unified) so i thought i would be a waste of time to ask you.....
But sorry from the bottom of my heart.. OK i ask it now Can I use Slimkat GT-P3100 ROM as Base ROM for my upcoming projects?
If you deny i will delete my current projects.. and yeah one more this there is a problem with your lineage 11 they just dont boot...
Kunal Gautam said:
I thought you discontinued slimkat for p3100 (not unified) so i thought i would be a waste of time to ask you.....
Click to expand...
Click to collapse
Read the Forum Rules, #12. It makes no difference if a rom is still supported or not - someone else has the ownership of the files if you don't compile it from source yourself.
But sorry from the bottom of my heart.. OK i ask it now Can I use Slimkat GT-P3100 ROM as Base ROM for my upcoming projects?
If you deny i will delete my current projects..
Click to expand...
Click to collapse
I need to think about it, it's opensource and can be esylie compiled from source and you are quite late with your question.
and yeah one more this there is a problem with your lineage 11 they just dont boot...
Click to expand...
Click to collapse
Not sure what it has to do with this situation, but ok: Boots fine here, screenshot attached. You have problems in general with unified roms to boot?
Kunal Gautam said:
I thought you discontinued slimkat for p3100 (not unified) so i thought i would be a waste of time to ask you.....
But sorry from the bottom of my heart.. OK i ask it now Can I use Slimkat GT-P3100 ROM as Base ROM for my upcoming projects?
If you deny i will delete my current projects.. and yeah one more this there is a problem with your lineage 11 they just dont boot...
Click to expand...
Click to collapse
what about me are you going to make it for tab 2 10.1?
How can you upload a rom without testing it ?
It does not boot. Have you used some port software or manually copied apps ?
Thread Closed

Categories

Resources