PLDNANDVR695 Pyle Android Head Unit - MTCB Android Head Units General

I've recently purchased and installed this unit from Amazon. Overall the unit isn't bad, but the ROM functionality leaves a lot to be desired. Is there any custom rom that's been developed that has been tested with this unit?
Also, is there any sort of radio app out there that could be used to replace the existing fm tuner software?
Thanks!

You'll need to post the details of the unit. Go to the settings page and post what it says under about machine/device
Sent from my SM-G920F using Tapatalk

MCU
TP69E8A0.34
I think this is what you are saying?

https://drive.google.com/file/d/0B-N7dpyFwCaiUDRjQ0lxV2ljWUU/view?usp=sharing

It's not an MTCB unit. No one in the mtcb forums will be able to help and the roms here won't work.
Try Android auto general forum
Sent from my SM-G920F using Tapatalk

Related

Kit kat and always on w/google now

So after doing some reading I don't seem to be able to find the answer. I've read that there will be "hardware limitations" on some devices but not seen anything on the HTC one. This is the one feature I really look forward too. Any ideas? Or facts? Should I upgrade or stay with what I have?
Sent from my Nexus 7 using Tapatalk
IIRC, Snap800 is required for always on.

no fm radio after upgrading to cm10

hi, i was using galaxy tab p1000 with default os, some days ago i upgrded to cm 10.1 using cdesai's md, but now i cant see any fm radio option in my tab, please help
There isn't a fm radio chip in your tab.
Sent from my GT-N7100 using xda app-developers app
but in stock version i was able to tune fm radion there was an option for it, i tried spirit unlocked it it gives nothing
neteater said:
but in stock version i was able to tune fm radion there was an option for it, i tried spirit unlocked it it gives nothing
Click to expand...
Click to collapse
Are you sure you're not confusing this for an Internet Radio stream? Cause the GT-P1000 NEVER had FM Radio as part of its Spec.
As such it can never receive such Signals.
The GT-P1000 model doesn't have fm radio, I think the radio you have It's a Insternet Radio, try downloading Tune In Radio from the Google Play Store!!!
Sent from my GT-P1000 using xda premium
---------- Post added at 11:07 PM ---------- Previous post was at 11:03 PM ----------
Internet* The app has a free and a paid version...
Sent from my GT-P1000 using xda premium
---------- Post added at 11:13 PM ---------- Previous post was at 11:07 PM ----------
The other option is that you are on a different model of device because GT-P1000 doesm't have fm radio
Sent from my GT-P1000 using xda premium
seems like we are all wrong.
The BCM4329 chip has a FM receiver.
http://www.broadcom.com/products/Bluetooth/Bluetooth-RF-Silicon-and-Software-Solutions/BCM4329
But there isn't a firmware for it in Samsung devices.
http://forum.xda-developers.com/showthread.php?t=837691
unless the OP's original firmware really has it.
One in the above thread said a shop demo firmware has FM Radio app in it.
Well its not like I was expecting any miracles to happen, but I did discover something relevant IMHO.
I was planing on switching from the standard XXJPZ Baseband (modem.bin) to VJJR2 (modem.bin), as I hear tale that its:
a) More Battery friendlier then XXJPZ
b) Faster more stable then XXJPZ
Now I don't know if any of that will actually pan out though. Early tests have proven to me that I still have both Data and Voice with this modem.bin. On the plus side the Voice Volume is now fixed at a 100% Hopefully that alone will fix the pitifully low volume in my Navigon App,
Now to the relevant part of this Post. Again I wasn't expecting much to happen. But, I decided to download SpritFM anyway, and of course it crashed pretty hard on XXJPZ. Basically it gave me the standard "No FM found" Error in that cryptic way only SpritFM can do so well.
Now that I updated that modem.bin File however I'm no longer receiving those Messages. The App (on the face of it...), seems to be working now. The problem is I'm still not getting anything.
Most likely an Antenna Problem me thinks. Shame I know jack all when it gets down to the Silicon Level. Cause I think this might just have worked otherwise.
Ichijoe said:
But, I decided to download SpritFM anyway, and of course it crashed pretty hard on XXJPZ. Basically it gave me the standard "No FM found" Error in that cryptic way only SpritFM can do so well.
Click to expand...
Click to collapse
LOL.
Firmware is very rarely an obstacle to real over the air FM radio.
99.9% of the time, the problem is that the FM/BT/WiFi combo chip FM antenna pins are not connected anywhere useful, which is usually through a few cheap components to the wired headset jack.
Usually the FM antenna pins are grounded, quite purposely, which absolutely and completely kills any chance of picking up any signal.

NOUGAT For RK3188 !!!!!!

NOUGAT !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Well, sort of - I ve discovered that., as well as selling RK3368/PX5 octacore Marshmallow MTCD units, Hotaudio have released an RK3188/PX3 quadcore MTCD unit that runs Nougat and has 2Gb RAM.
This means there are now MTCD Nougat images around, surely it would not take that much for some one to make and MTCB/C version ??
Hotaudio MTCD threads :
https://forum.xda-developers.com/and...t-px3-t3588871
https://forum.xda-developers.com/and...-octa-t3575155
Latest MTCD RK3188 ROM :
https://yadi.sk/d/umCvHqCDzHccr/RockChip PX3/Android 7.1?force_show=1
A job for Malaysk!
Would be awesome to test this rom on an mtcd RK3188 unit with microG.
Send from D6603 with Tapatalk
makes2068 said:
A job for Malaysk!
Would be awesome to test this rom on an mtcd RK3188 unit with microG.
Send from D6603 with Tapatalk
Click to expand...
Click to collapse
If you have MTCD you can try it already, just read the threads I linked to.
nothing for MTCB? :\
mouscolo said:
nothing for MTCB? :\
Click to expand...
Click to collapse
No, the purpose of the thread was to alert devs that there are 3 N ROMs for MTCD, that surely could be modified to get N on MTCB/C.
typos1 said:
No, the purpose of the thread was to alert devs that there are 3 N ROMs for MTCD, that surely could be modified to get N on MTCB/C.
Click to expand...
Click to collapse
hopefully, as ill bring good news very soon for those who wants 2gm som board
Sent from my iPhone using Tapatalk
mouscolo said:
hopefully, as ill bring good news very soon for those who wants 2gm som board
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
How do you mean ?
Sorry. No nand backup possible to go back to my actual good running Malaysk Rom
Send from D6603 with Tapatalk
typos1 said:
How do you mean ?
Click to expand...
Click to collapse
i found guy in china making this SoM board rk3188 with 2gm ram and 32gb nand, the cost for each is around 65 to 75 usd, i contact him last night and the goods will be ready with in one month
i hope these SoMs can help us with new ROMS!
typos1 said:
NOUGAT !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Well, sort of - I ve discovered that., as well as selling RK3368/PX5 octacore Marshmallow MTCD units, Hotaudio have released an RK3188/PX3 quadcore MTCD unit that runs Nougat and has 2Gb RAM.
Click to expand...
Click to collapse
I believe hotaudio are already working on Android O
---------- Post added at 11:39 PM ---------- Previous post was at 11:30 PM ----------
mouscolo said:
i found guy in china making this SoM board rk3188 with 2gm ram and 32gb nand, the cost for each is around 65 to 75 usd, i contact him last night and the goods will be ready with in one month
i hope these SoMs can help us with new ROMS!
Click to expand...
Click to collapse
If you do manage to get them SoM boards set up a upgrade thread and give price with postage. And put pics of the boards up so we can see if our units will accept them.
pcmender2005 said:
I believe hotaudio are already working on Android O
---------- Post added at 11:39 PM ---------- Previous post was at 11:30 PM ----------
If you do manage to get them SoM boards set up a upgrade thread and give price with postage. And put pics of the boards up so we can see if our units will accept them.
Click to expand...
Click to collapse
things will be clear in the upcoming weeks, i need to test it first in my unit and i will do my best for all...
Sent from my iPhone using Tapatalk
This is the best ROM for any MTC unit I ve seen and it has a screen lock !! :
https://forum.xda-developers.com/an...l9k-mod-mtcd-head-units-t3623982#post72727357
pity its only for MTCD
typos1 said:
This is the best ROM for any MTC unit I ve seen and it has a screen lock !! :
https://forum.xda-developers.com/an...l9k-mod-mtcd-head-units-t3623982#post72727357
pity its only for MTCD
Click to expand...
Click to collapse
so in future MTCB/C will be disappeared?
Sent from my iPhone using Tapatalk
mouscolo said:
so in future MTCB/C will be disappeared?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
No one has said that, but it does seem likely because the MTCD MCU units are newer.
This is a custom ROM - the dev chose to do it on a MTCD unit because he has one, that is why there is no MTCB/C version, although I did ask if he may be willing to do one and he said maybe in the future.
mouscolo said:
things will be clear in the upcoming weeks, i need to test it first in my unit and i will do my best for all...
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I am also waiting if new soms will change things. I bought rams but didn't upgrade yet because I am waiting if this soms will be better or just nand flash upgrade to 32gb...
Sent from my iPhone using Tapatalk
Another link to MTCD Nougat :
https://mega.nz/#F!zRRkVThb!DYBC0LRK-o34ZxDObQo73Q!2AwHULDK
typos1 said:
Another link to MTCD Nougat :
https://mega.nz/#F!zRRkVThb!DYBC0LRK-o34ZxDObQo73Q!2AwHULDK
Click to expand...
Click to collapse
This rom will not work on a Px5 2gb right?
I ordered this board for my PX3 Erisin 3015 RK3188
https://de.aliexpress.com/store/pro...rade/601467_32814450733.html?isOrigTitle=true
maurogrc said:
This rom will not work on a Px5 2gb right?
Click to expand...
Click to collapse
Yes, thats right, its a Nougat ROM for PX3 MTCD, so it wont work on a PX5.
makes2068 said:
I ordered this board for my PX3 Erisin 3015 RK3188
https://de.aliexpress.com/store/pro...rade/601467_32814450733.html?isOrigTitle=true
Click to expand...
Click to collapse
Yes, but what relevance is that to this thread ?
mouscolo said:
things will be clear in the upcoming weeks, i need to test it first in my unit and i will do my best for all...
Click to expand...
Click to collapse
Did you manage to get the SoM board you was on about?

Radio App

Hi.
I bought an Auto Pumpkin Android.
This one:
http://www.autopumpkin.de/autoradio-mit-android/autoradio-android-6-0.html
However the radio app is lame and ugly.
Any aftermarket solution?
Best regards
joaorusso said:
Hi.
I bought an Auto Pumpkin Android.
This one:
http://www.autopumpkin.de/autoradio-mit-android/autoradio-android-6-0.html
However the radio app is lame and ugly.
Any aftermarket solution?
Best regards
Click to expand...
Click to collapse
....use the search luke....
marchnz said:
....use the search luke....
Click to expand...
Click to collapse
i already did.
But what i'm looking for is a true FM Radio App not using the Wifi or 3G/4G signal, like Tunein and so.
i have problems with radio app any times dont save the radio stations to the buttons, i use px5 android 8

Head unit Android 6.0.1 problems with startup software and other. Can you help me??

I have a headunit in my car with Android 6.0.1 from the manufacturer KSP and I have been looking in the forum but I really do not clarify much. My intention is to activate a screensaver and a program for detection of radars so that it run immediately after starting the unit; with this I would already be happy (the unit erases the software in memory when it comes out of sleep mode). I would also like to know if there is any way by software that does not cut the sound of the radio when my car activates the Start-Stop system, the radio does not reset or restart but the sound of the radio yes, I do not understand why !!!!
I have been reading several posts about the virtues of Xposed Framawork but I do not know if there will be any other simpler method without having to resort to flashing the firm with TWRP and other utilities like that. Also I do not know if it is very compatible with Android 6.0.1 and my manufacturer all this. Thx.
Anyone know something about this???:crying:
Silver_ said:
Anyone know something about this???:crying:
Click to expand...
Click to collapse
Maybe you should look for help in the proper forums. This has nothing to do with Android Auto.
m00n61 said:
Maybe you should look for help in the proper forums. This has nothing to do with Android Auto.
Click to expand...
Click to collapse
What is the right forum???
Enviado desde mi HT20Pro mediante Tapatalk
Silver_ said:
What is the right forum???
Enviado desde mi HT20Pro mediante Tapatalk
Click to expand...
Click to collapse
How about this one:
https://forum.xda-developers.com/android-auto/android-head-units
And, before posting, read these threads:
https://forum.xda-developers.com/an...mtcb-headunit-wiki-article-knowledge-t3246239
https://forum.xda-developers.com/showthread.php?t=3246334
You will get at least a minimal knowledge of these Chinese units and maybe you will be able to ask questions that get answers.

Categories

Resources