freezing mi5 black screen - Xiaomi Mi 5 Questions & Answers

I just received my Mi5 today, and I am getting a constant freezing black screen when trying to use most apps. It doesn't seem to be a certain app that triggers it. It just happens on its own. The screen just goes black, and the only way to get it to work again is to reset the phone. I installed the latest update available for the phone, reset it to factory settings twice, and the problem still persists. Is anyone having this issue? It's running the chinese rom.

Related

Screen rotation problem

Has anyone else had problems with auto screen rotation,mine has twice now in 4 days started either getting stuck in landscape mode or would start rotating back and forth by itself,I fixed it for now by clearing cache,but curious if anyone else has had this issue.
I have the same problem on 910c variant, even factory reset does nothing, I hope it is not a faulty hardware
Ditto on my 910T3 TMo. Stock rooted. Auto screen rotate stopped working 2 days ago.
I have wiped cache and dalvik.
I have tested sensors with other apps (they work).
I have run self tests (dial *#0*#)
I disabled all Xposed modules
I tried 3rd party screen rotation app
None of these have resolved the problem.
Also tried wiping Dalvik and cache and reflashing the kernel.
That didn't fix the issue either.
the problem seems to happen when the phone is hot, because when I wake up In the morning I turn it on and doesn't have the problem
I have the same exact issue. I've replaced my phone 3 times because of it. BTW I'm on 910T.
Hopefully this new software update that just rolled out fixes this issue.
I also noticed when in the camera app, if i rotate the phone between portrait and landscape, the controls on the screen rotate appropriately.
So again, that verifies the sensors are working and it isn't a hardware issue for me.
Also tried using stock launcher, but no change.
Am about ready for a factory reset.
I've experienced this also but I thought/think it was a Nova launcher bug that seems to have corrected itself.
Since the recent update everything has been running fine. So far I haven't gotten the screen rotation issue!
It used to happen at least 2 times a day. I think it might just be a software based issue.
SM-N910T still on 5.0.1 stock having the same issues. It gets stuck in landscape, stays stuck in over landscape position.
I ended up doing a factory wipe and updating to the stock rooted DOK2 rom that just came out.
So far no issues and screen rotation is working (along with several other nuisance issues that went away).
Just as an update I lost screen rotation on DOK2 stock rooted ROM. However, I believe it may have been related to some debloat cleanup I was doing.
Under Ti Backup I searched for "facebook" and manually forced uninstall of the 4 "system" apps that came up.
I don't know what any of those would have to do with screen rotation, but one of them does.
I was not able to successfully restore those files via Ti Backup either, so ended up dirty flashing the same DOK2 zip file to restore them.
That fixed it. So rather than forcing uninstall of those files I just removed updates and disabled them via the android app manager.
So far so good.

LG URBANE W150 - the always-on screen stopped working after update

Hello,
After updating Android Wear (application) to version 2.8, after a certain time the function of the always-on-screen stops working. The screen flashes, the white color turns pink and the screen goes out, but it happens only when the Ambient Mode is on (the full mode doesn’t break down). When, I did the reset factory settings, everything started working again. Afterwards, the situation is repeated, a few hours after the update the screen is not working properly again. The update introduces changes which I liked very much, among other things, the black interface, so I don’t consider going back to the old version. Does anyone know how to solve the problem?
I noticed mine turned off once.. but it was right around while it was doing the update... so I chalked it up to a hiccup while it was installing... right now it seems to be using ambient mode perfectly.
I only use the Line Watchface / Mini Wear Launcher
Yesterday I got one more small update and since then there is no problem

Strange problem with auto-start apps

Just got this phone days ago and flashed fresh new .205 firmware, then configed the phone and installed apps on it.
Everything appears fine, but suddenly all auto-start apps stop auto-starting after phone boots, until I unlock my phone manually, then finally they can start in the background.
What could cause this to happen? My other phone, Xperia XZP with exact same apps and settings works fine with no problem.
Update: app-start turns normal after disabling PIN. But how? Why? Can I turn it on again?
Update: apps stopped auto-starting again after fingerprint(PIN) is enabled. Really need some help here. Smart lock also appears broken, it just shows a blank screen in its settings page.
Update 2:
OK now I know it's caused by a feature called "FBE" and I have to do a factory reset to get rid of it. So damn great. I hate these companies.

P10 Finally Updated to 8.0 - Now almost unusable... help

Hopefully someone can help...
I finally received my OTA update to Oreo last week... all was good for a few days, then over the weekend it has been having constant issues with locking up, apps not responding and streaming issues. Top ones I can think of are:
Incoming calls do not display on lock screen and screen just goes black when I try to open
Facebook Messenger sometimes locking up the whole phone
When streaming a video file to Chromecast with AllCast, it keeps pausing until I activate the screen again
I wondered if it was to do with a compatibility issue with SwiftKey, so I switched back to Gboard, which seemed ok for a bit then it went on the fritz too! I've tried taking the SD card out and restarting, I've tried formatting the cache partition from the boot menu... still no joy.
Anyone got any idea what the issue could be and how to remedy?
After every os update its recommend to do factory reset.
Try factory reset and everything will be fine.

Frequent System UI freezing?

Hi Everyone,
It has been going on for roughly a year now, while I'm using my phone it suddenly just freezes entirely. Touchscreen just becomes unresponsive, can't tap on anything, gestures don't work and notification bar can't be pulled down.
Physical buttons does not seem to be affected, even if my screen is totally frozen I can still adjust volume levels and I can lock the phone via the power button. After locking and unlocking my phone, everything goes back to normal, touch responsiveness comes back and starts working as it should till the next hiccup.
It happens frequently, there are times when the screen locks up 2 or 3 times in a 10 minute period window. Every time this happens, I need to lock and unlock my phone and it starts working again.
Also it doesn't seem like a specific application is doing it, it happens when I'm browsing websites via Google Chrome, it happens with Amazon App, Messenger, Google Play Store, even on the Google News feed.
It gets more and more annoying as time goes by and it still hasn't been fixed.
I have been in contact with Google Support in the beginning when it started, but all they suggested is that I should do a Factory Reset (which I did).
Has anyone else experienced this issue or is it just my device doing this?
PS.: My phone is fully stock, hasn't been messed around.
Any physical damage to the device? & Have you tried checking if the issue occurs in safe mode too? If it is caused by a 3rd party or background app it wont replicate in safe mode.
Scan with Malwarebytes.
Try clearing system cache.
Try safe mode and a hard reboot.
That qualifies for erratic behavior and may be the only sign of a virus or trojan you'll see... at first.
Either way you could be headed for a boot loop.
Regardless even if Malwarebytes finds nothing it's factory reset time. Nuke it; a trojan can do a lot of damage to you in a short amount of time.
After the reload change your Google password.
Before you load -anything- make sure the issue is gone!
If it persists it's either a firmware or more likely a hardware failure.

Categories

Resources