After so much hardwork and efforts of our beloved superhero uncle @ketut.kumajaya and his supporter @emfox, we finally have official CM support for our beloved RedMi 2!
Original development thread is located HERE
NOTE:-
If you are coming from lollipop MIUI, no problem to flash CM13 directly as uncle Kuma made it lollipop firmware compatible!
_____
If you are on Kitkat bootlader (as me) and face no issues with it, stick to it.
_____
Further if you want to upgrade to lollipop firmware, see these posts below:-
FOR 2014813 ONLY:- See THIS and follow as given.
FOR OTHER MODELS:- Download THIS flashable zip and put in your sdcard and flash it after ROM and GApps
Credits- @NeoDarkness
THINGS YOU'LL NEED:
1. LATEST NIGHTLY: https://download.cyanogenmod.org/?device=wt88047
2. TWRP: https://www.androidfilehost.com/?fid=24533100289591162
3. OpenGapps 6.0 ARM (Nano Recommended): www.opengapps.org
4. Battery charged above 95%(min).
INSTALLATION:
Before installation make sure you have a nandroid backup.
1. Flash TWRP with fastboot.
(I will write a short & simple guide on this shortly.)
2. Put Nightly and Gapps zip files in sdcard.
3. Boot into recovery.
4. Go into Wipe-->Advanced wipe-->Select "data, system, dalvik/art cache, cache" and wipe them by sliding the bar at bottom.
5. Go back and go into Install--> Select the correct ROM zip file. Flash it by sliding the bar at bottom.
6. After ROM flashing is complete, flash GApps by same method.
7. Wipe cache again.
8. Reboot.
Let the phone boot. It doesn't take so much time to boot.
CONGRATS, YOU SUCCESSFULLY INSTALLED CM 13 OFFICIAL NIGHTLY ON YOUR REDMI 2 !
FAQ:
1. Will this ROM work on 2014818, 2014813, 2014817 both 1 GB and 2GB ram versions?
--> YES!
2. Does this ROM have OTA support?
--> YES. Go to Settings->About phone->Cyanogenmod Updates. Download the latest nightly and proceed as the wizard guides you.
3. Where the hell is root access?
--> Enable developer options by tapping build number in Settings> about phone.
Enable root access from Developer options.
4. Okay, but where's the changelog dude?
--> HERE YOU GO: https://www.cmxlog.com/13/wt88047/
FEEL FREE TO ASK QUESTIONS BELOW AND HIT THANKS !
I AM NOT RESPONSIBLE IN ANY WAY FOR WHAT HAPPENS TO YOU AND YOUR DEVICE!
Thanksssss
It will be ok and no problem to install OpenGapps micro.
emfox said:
It will be ok and no problem to install OpenGapps micro.
Click to expand...
Click to collapse
Some people were saying they had problem with notification panel pulldown.
emfox said:
It will be ok and no problem to install OpenGapps micro.
Click to expand...
Click to collapse
Opengapps mini is OK too.
vkp1997 said:
Opengapps mini is OK too.
Click to expand...
Click to collapse
Okay. Updated the OP.
THANKS :good:
Sent from my 2014818 using Tapatalk
noobpremium said:
Some people were saying they had problem with notification panel pulldown.
Click to expand...
Click to collapse
because they may be using wrong version, such as aroma.
emfox said:
because they may be using wrong version, such as aroma.
Click to expand...
Click to collapse
I'm using aroma version and it's fine.
Sent from my HM2014817 using XDA Labs
izzxtxmir said:
I'm using aroma version and it's fine.
Sent from my HM2014817 using XDA Labs
Click to expand...
Click to collapse
Aroma version confusing me, always nano here.
izzxtxmir said:
I'm using aroma version and it's fine.
Sent from my HM2014817 using XDA Labs
Click to expand...
Click to collapse
don't know either, some people with aroma report that it affect the pull down menu.
But I'm always ok with micro and haven't tried others.
ketut.kumajaya said:
Aroma version confusing me, always nano here.
Click to expand...
Click to collapse
Nano is best. Lightweight and fast install xD
Sent from my 2014818 using Tapatalk
video playback issue
Can anybody help me when i play any video on cm 13 i face a issue a blue screen flickers . I'm using redmi 2 1 gb variant .
Please help me
[email protected] said:
Can anybody help me when i play any video on cm 13 i face a issue a blue screen flickers . I'm using redmi 2 1 gb variant .
Please help me
Click to expand...
Click to collapse
confirmed i also having this, but don't know if it is a bug or what.
hopefully they are gonna fix this in next build.
---------- Post added at 05:05 PM ---------- Previous post was at 05:00 PM ----------
when downloading gapps from opengapps which platform to choose ARM64 or ARM?
A post without screenshot? Hm, just waiting
Sent from my 2014811 using Tapatalk
redsrew said:
confirmed i also having this, but don't know if it is a bug or what.
hopefully they are gonna fix this in next build.
---------- Post added at 05:05 PM ---------- Previous post was at 05:00 PM ----------
when downloading gapps from opengapps which platform to choose ARM64 or ARM?
Click to expand...
Click to collapse
Use ARM nano gapps always.
We do have a 64 bit SOC but not 64 bit kernel. Still running 32 bit MM.
Sent from my 2014818 using Tapatalk
AlbanaUcay said:
A post without screenshot? Hm, just waiting
Sent from my 2014811 using Tapatalk
Click to expand...
Click to collapse
Today my exam starts dude, gimme some time pls.
Sent from my 2014818 using Tapatalk
Any Major bugs? Im using the Redmi 2 2gb variant with the stock MIUI 7.1 rom
niyogro said:
Any Major bugs? Im using the Redmi 2 2gb variant with the stock MIUI 7.1 rom
Click to expand...
Click to collapse
No. Blue flashes are reported but they're very are rare. You can avoid them by turning off the force gpu rendering in developer option
Sent from my 2014818 using Tapatalk
no bugs for a nightly?
noobpremium said:
No. Blue flashes are reported but they're very are rare. You can avoid them by turning off the force gpu rendering in developer option
Sent from my 2014818 using Tapatalk
Click to expand...
Click to collapse
So can i use this ROM as my daily driver? Hows the battery life?
also do all the basic features like the camera, bluetooth, wifi, etc work perfectly?
Is this using x64?
niyogro said:
So can i use this ROM as my daily driver? Hows the battery life?
also do all the basic features like the camera, bluetooth, wifi, etc work perfectly?
Is this using x64?
Click to expand...
Click to collapse
No x64 support until xiaomi releases lollipop sources.
Best as daily driver.
Everything works best. Wifi is strong.
I get approx 5.30 hrs of SOT.
Camera is good too.
Sent from my 2014818 using Tapatalk
Related
Its unofficial,
If you want the link DM me.
Edit: Here is the link: https://www.androidfilehost.com/?fid=24052804347849450
If anyone wants me to take it down lmk. This is not my build, it was uploaded and most likely compiled by "DeVortex"
You also may want to check out this app:
https://www.reddit.com/r/Android/comments/3qp5q9/custom_quick_settings_app_allowing_for_broadcast/
It allows you to edit the quick settings tiles to anything you like. I tested it with this build of cm13 and it works great.
cm-13-20151029-UNOFFICIAL-klte.zip Download Link:
https://www.androidfilehost.com/?fid=24052804347849406
Thanks to DeVorteX
It's everything working? Or it's full of bugs for now ?
Will this work on klte (G900F) or the only kltespr ??
egonet said:
Will this work on klte (G900F) or the only kltespr ??
Click to expand...
Click to collapse
The link for the klte build is in the second post.
igorescu04 said:
It's everything working? Or it's full of bugs for now ?
Click to expand...
Click to collapse
klte version is super buggy. launcher is a no go, sim works, wifi works, didn't check much more. when a working version is compiled you will see someone posting it in the unified thread.
---------- Post added at 01:58 PM ---------- Previous post was at 01:41 PM ----------
igorescu04 said:
It's everything working? Or it's full of bugs for now ?
Click to expand...
Click to collapse
klte version is super buggy. launcher is a no go, sim works, wifi works, didn't check much more. when a working version is compiled you will see someone posting it in the unified thread.
Why I didn't find the fingerprint option? The cyanogenmod website says that we should have that option
Tommidi said:
Why I didn't find the fingerprint option? The cyanogenmod website says that we should have that option
Click to expand...
Click to collapse
Very alpha build? Maybe isnt official build yet, we need wait
Enviado de meu SM-G900F usando Tapatalk
I am syncing now Cm13 repo for klte. Will start building in a few,what do you think if I open up a thread in Android Development for cm13 on klte?
mauriicio21 said:
Very alpha build? Maybe isnt official build yet, we need wait
Enviado de meu SM-G900F usando Tapatalk
Click to expand...
Click to collapse
I'll try apps like fingersecurity to see if the code for the fingerprint is already integrated in the cm13 code (And only hidden in settings) or totally missing
Wolf80 said:
I am syncing now Cm13 repo for klte. Will start building in a few,what do you think if I open up a thread in Android Development for cm13 on klte?
Click to expand...
Click to collapse
Klte repo already working? If yes, yeah, open a thread
Enviado de meu SM-G900F usando Tapatalk
How stable is it?
And can I flash it over CM 12.1 on G900F without a factory reset?
broken3D said:
And can I flash it over CM 12.1 on G900F without a factory reset?
Click to expand...
Click to collapse
dont dirty flash on a new version of android. btw its very buggy, on my usc s5 i have service and i have wifi though so im very happy with how its all coming along. and i havent even flashed the latest build
How long do I need to wait for it to load? I've waited over ten minutes. I flashed the rom and the gapps, but it's stuck on the boot animation. Do I need a certain kernel?
Sent from my g900t.
daddymemoru said:
How long do I need to wait for it to load? I've waited over ten minutes. I flashed the rom and the gapps, but it's stuck on the boot animation. Do I need a certain kernel?
Sent from my g900t.
Click to expand...
Click to collapse
Did you do the factory reset first?
Tommidi said:
Did you do the factory reset first?
Click to expand...
Click to collapse
Yeah I did regular wipe and tried the advanced wipe with system, data, cache and dalvik. Makes me sad I can't seem to get this awesome rom to work.
Don't feel sad its buggy AF its unusable
Their really should make a thread for this I tried this on my unlock Sprint s5 and its not as buggy as people say Im using build 10302015 klte version and it pretty smooth now on tap doesn't work but everything else so far does. For those having trouble installing or it getting stuck booting just power off reboot recovery and factory reset again and it should work
orenzah said:
cm-13-20151029-UNOFFICIAL-klte.zip Download Link:
https://www.androidfilehost.com/?fid=24052804347849406
Thanks to DeVorteX
Click to expand...
Click to collapse
He has an updated one here for Oct 31 at the bottom
http://23.94.12.54/klte/rel/
Sent from my SM-G900W8 using Tapatalk
http://forum.xda-developers.com/gal...ent/rom-cyanogenmod-13-0-android-6-0-t3237502
Hey all,
I am not going to take any credits for this.
This thread is just for all those VS980 users who were waiting for CM 13.
So the wait is end now
Cyanogemod 13 Official : [ http://oss.reflected.net/jenkins/136543/cm-13.0-20151127-NIGHTLY-vs980.zip ]
Android 6.0 Gapps : [ http://opengapps.org ]
1) Download Files
2) Wipe all except Internal
3) Flash CM 13 Zip
4) Flash Gapps 6.0
and you're done!
Reboot System :laugh:
Pretty good
I flashed if pretty early this morning and it's stable-ish.
The only issue I've found is that the camera refuses to take pictures, it'll act like it took one and will freeze on the moment it took the picture but won't save it. The app doesn't freeze, only the camera.
chrisc44890 said:
I flashed if pretty early this morning and it's stable-ish.
The only issue I've found is that the camera refuses to take pictures, it'll act like it took one and will freeze on the moment it took the picture but won't save it. The app doesn't freeze, only the camera.
Click to expand...
Click to collapse
No issues here (yet). Little choppy at times but still wonderful to see that someone cares about us G2 users!
---------- Post added at 09:57 PM ---------- Previous post was at 09:49 PM ----------
Did you have to flash a bootstack? I did.
just pointing out there is already a CM13 thread in G2 Android Development... until there is a dev/maintainer officially for vs980 it may make more sense to post there
chrisc44890 said:
I flashed if pretty early this morning and it's stable-ish.
The only issue I've found is that the camera refuses to take pictures, it'll act like it took one and will freeze on the moment it took the picture but won't save it. The app doesn't freeze, only the camera.
Click to expand...
Click to collapse
Have you tried downloading any 3rd party camera apps to see if they work?
The very first picture taken after a reboot works. Exit the camera and try again? Error. Doesn't matter if a different app is used.
Sent from my SM-T320 using Tapatalk
Yup, same thing here. Both with 27 and 29 builds
In addition to the camera issue I've also noticed that the music app seems to have trouble if I try to fast forward within a single track and Hangouts notifications seem to be broken for me.
I'm excited that it seems to be pretty stable. I might actually keep it as my daily driver and just deal with the bugs. With that said, do I have to do a wipe if I flash a new nightly over the one I'm running now?
BobBruff said:
In addition to the camera issue I've also noticed that the music app seems to have trouble if I try to fast forward within a single track and Hangouts notifications seem to be broken for me.
Click to expand...
Click to collapse
Have you tried clearing the camera app' cache and data? Might yield some better results.
Sent from my XT1254 using Tapatalk
My only problem is a slow charge with the 11-30-2015 nightly
Enviado desde mi LG-VS980 mediante Tapatalk
cgvelmax said:
My only problem is a slow charge with the 11-30-2015 nightly
Enviado desde mi LG-VS980 mediante Tapatalk
Click to expand...
Click to collapse
I have a VS980 and have no issues. Check your cable and brick.
Sent from my XT1254 using Tapatalk
---------- Post added at 06:15 PM ---------- Previous post was at 06:10 PM ----------
It could be your phone too.
Sent from my XT1254 using Tapatalk
Charging works fine for me on 12/01 build, but double tap to wake does not.
Any LTE issues with CM13 on vs980?
Also, can it be flashed on the 39a bootstack from the resources thread or must rashed's 5.0.2 Bootstack with KitKat (Bump) bootloader mentioned in this thread be used?
kuyankee said:
Any LTE issues with CM13 on vs980?
Click to expand...
Click to collapse
Not sure about your 2nd question, but I'm not having any LTE problems.
BobBruff said:
Not sure about your 2nd question, but I'm not having any LTE problems.
Click to expand...
Click to collapse
What were you running before this? You didn't flash any special bootstack prior to running this?
kuyankee said:
What were you running before this? You didn't flash any special bootstack prior to running this?
Click to expand...
Click to collapse
use 39a bootstack
Shehry_97 said:
Hey all,
I am not going to take any credits for this.
This thread is just for all those VS980 users who were waiting for CM 13.
So the wait is end now
Cyanogemod 13 Official : [ http://oss.reflected.net/jenkins/136543/cm-13.0-20151127-NIGHTLY-vs980.zip ]
Android 6.0 Gapps : [ http://opengapps.org ]
1) Download Files
2) Wipe all except Internal
3) Flash CM 13 Zip
4) Flash Gapps 6.0
and you're done!
Reboot System :laugh:
Click to expand...
Click to collapse
Even though the official CM site says you can just dirty flash.....
ddzado said:
Even though the official CM site says you can just dirty flash.....
Click to expand...
Click to collapse
It never hurts to cleanflash, it can hurt to dirty.......
I seem to need a bootstack. Anyone running it without a bootstack and how did you do it?
I am running VS980 stock rom bootstack 39a can I just flash it with no problems?
I'm so sorry but this thread has already moved to http://forum.xda-developers.com/redmi-note/development/rom-resurrection-remix-redmi-note-4g-t3393516 ...since I'm retired in few months ago ^_^
Thanks to @ashishkotnala29 for help me to continue dior project for Official Resurrection Remix ^_^
The best rom for our device and one of the best devs. Thank you msfkonsole
Sent from my HM NOTE 1LTE using Tapatalk
peepee999 said:
The best rom for our device and one of the best devs. Thank you msfkonsole
Sent from my HM NOTE 1LTE using Tapatalk
Click to expand...
Click to collapse
glad to hear that, on next build will came out for v5.6.6 .
will upload it ASAP
Sent from my HM NOTE 1LTE using Tapatalk
Wow so excited! Waiting patiently! Thank you
Sent from my HM NOTE 1LTE using Tapatalk
that facebook apk work?
So far it is a very nice rom in my use of it. Tested camera, flash, gps, speakers, notification lights, many apps (including installing facebook app and logging in, but not actually using it more than that), etc. So far so good. Everything seems to be working. Thank you very much msfkonsole for making it available.
(Edit: backlights on soft buttons are working fine; no problem.)
yeah,,facebook work fine..
the loud speaker when call/get call not loud as always..it seem normal or without use load speaker
Its good news.....thanx mate
Sent from my Redmi Note 3 using Tapatalk
Just to confirm the following:
For 5.6.5, the edge touch bug fix kernel is the default, but for 5.6.6, it is a separate zip ?
Fantastic ROM
Fantastic ROM. I have been using CM 12.1 and post that I used CM 13. But this is better than all of them [including MIUI 7.1]
But Facing the following problems:
1. No Transparent Status Bar
2. Weather not working - neither on the status bar, nor on the lock screen
3. Cannot change the Lock Screen Wallpaper through settings
Please help to fix this
Why I keep getting error when flashing?
Code:
unmount of /system/failed; no such volume
script succeeded: result was [0.200000]
Updating partition details....
... done
I am using TWRP 2.8.7.0.
Tried that with Philz Touch Recovery but get the same error as well.
Anyone facing same issue?
Thanks in advance.
I want to know how to download it?
Sent using XDA One
kul.rohan said:
Fantastic ROM. I have been using CM 12.1 and post that I used CM 13. But this is better than all of them [including MIUI 7.1]
But Facing the following problems:
1. No Transparent Status Bar
2. Weather not working - neither on the status bar, nor on the lock screen
3. Cannot change the Lock Screen Wallpaper through settings
Please help to fix this
Click to expand...
Click to collapse
1. The Status bar is definitely transparent on my phone. (Did you do a clean install?)
2. I also haven't gotten the weather to work.
3. Lockscreen wallpaper does not change for me either.
I'd also like to be able to adjust the soft buttons backlight brightness like I could in CM12.1.
But all those are only very minor problems, and this is proving to be a very good rom for me.
---------- Post added at 02:37 PM ---------- Previous post was at 02:27 PM ----------
AdliHebat said:
Why I keep getting error when flashing?
Code:
unmount of /system/failed; no such volume
script succeeded: result was [0.200000]
Updating partition details....
... done
I am using TWRP 2.8.7.0.
Tried that with Philz Touch Recovery but get the same error as well.
Anyone facing same issue?
Thanks in advance.
Click to expand...
Click to collapse
Try this: https://mega.nz/#!I8FzHTiQ!ptfcpHmTpLo7l-xH_vDySpLVasaXDvaeyzAIT578Qjo If that doesn't work, maybe download it again and put it in the root of the internal memory. I don't know what else to suggest.
Edit: I just installed latest 5.6.6 using Philz Touch with rom in root folder of external SD card. No problem.
bingoyang said:
I want to know how to download it?
Sent using XDA One
Click to expand...
Click to collapse
Try this to get the newest version 5.6.6: https://basketbuild.com/devs/resurrectionremix/dior You will also need this kernel patch: https://basketbuild.com/filedl/devs?dev=Msf_Console&dl=Msf_Console/RR/kernel/edgefix_20160403.zip. Just flash the patch after your flash the rom.
nz_mincemeat said:
Just to confirm the following:
For 5.6.5, the edge touch bug fix kernel is the default, but for 5.6.6, it is a separate zip ?
Click to expand...
Click to collapse
Did that work for you? Any "official" word on that?
Edit: I flashed it and it definitely solved the problem for me. Thanks for the link.
twrock said:
Did that work for you? Any "official" word on that?
Edit: I flashed it and it definitely solved the problem for me. Thanks for the link.
Click to expand...
Click to collapse
wanna install the latest build 5.6.6 ,,,that we need clean install..or just install?
thnx b4
Another little bug. Flashlight not showing up in the Quick Setting Panel in v5.6.6 with edge touch bug fix kernel update.
Edit: reboot solved that problem, but I don't know why it happened in the first place.
---------- Post added at 04:52 PM ---------- Previous post was at 04:48 PM ----------
Nasrun said:
wanna install the latest build 5.6.6 ,,,that we need clean install..or just install?
thnx b4
Click to expand...
Click to collapse
I can't give any "official" suggestion. I first just installed and wiped cache & dalvik cache. But then I had some weird things happening (strange lag), so I wiped it and started over with a clean install (wipe, flashed 5.6.6 rom, flashed the patched kernel, reboot). YMMV, but that's how it worked for me.
twrock said:
Did that work for you? Any "official" word on that?
Edit: I flashed it and it definitely solved the problem for me. Thanks for the link.
Click to expand...
Click to collapse
twrock said:
Another little bug. Flashlight not showing up in the Quick Setting Panel in v5.6.6 with edge touch bug fix kernel update.
---------- Post added at 04:52 PM ---------- Previous post was at 04:48 PM ----------
I can't give any "official" suggestion. I first just installed and wiped cache & dalvik cache. But then I had some weird things happening (strange lag), so I wiped it and started over with a clean install (wipe, flashed 5.6.6 rom, flashed the patched kernel, reboot). YMMV, but that's how it worked for me.
Click to expand...
Click to collapse
thanks bro...i have installed the latest build..without clean install..lucky there is no lag at process..
btw any link for kernel..i never patch any kernel ..dunno how to use and what for ..(nubie )
Nasrun said:
thanks bro...i have installed the latest build..without clean install..lucky there is no lag at process..
btw any link for kernel..i never patch any kernel ..dunno how to use and what for ..(nubie )
Click to expand...
Click to collapse
The link is from post #9 on page one by nz_mincemeat (https://basketbuild.com/filedl/devs?dev=Msf_Console&dl=Msf_Console/RR/kernel/edgefix_20160403.zip). You just download that zip file, and then flash it from recovery just like you would do with a new rom. It replaces the boot.img ("kernel") and one file, and that solves the edge scrolling problem with the 5.6.6 rom. No need to wipe or do a fresh install when flashing that patch.
twrock said:
The link is from post #9 on page one by nz_mincemeat (https://basketbuild.com/filedl/devs?dev=Msf_Console&dl=Msf_Console/RR/kernel/edgefix_20160403.zip). You just download that zip file, and then flash it from recovery just like you would do with a new rom. It replaces the boot.img ("kernel") and one file, and that solves the edge scrolling problem with the 5.6.6 rom. No need to wipe or do a fresh install when flashing that patch.
Click to expand...
Click to collapse
many thanks bro..will try this
edit : cant flash the kernel zip..footer error, use twrp same issues
any advice?
Nasrun said:
many thanks bro..will try this
edit : cant flash the kernel zip..footer error, use twrp same issues
any advice?
Click to expand...
Click to collapse
Hmm, strange. This file, edgefix_20160403.zip, right?
I'm using CWM based Philz Touch Recovery, but I don't know if that is the issue or not. If you were able to flash the rom, I can't see why you can't flash the edgefix update.
I'm having a few weird troubles though. Twice today I had the screen freeze for a time, and then when it came back, it was jumping around as if an invisible finger was touching all over the screen randomly. I had to force a reboot both times. That's not a minor bug. Also, I've had it turn on in my pocket and start to do pocket-dialing. At least I can hear it when that starts. Is there a setting to eliminate pocket dialing?
Edit: Ah, I see that 20160406 is released. Maybe I'll give that a try and see if it still has those problems.
Here is a Nexus Experience ROM for the Moto G 2015.
Changelog of Release 10.4:
Android 6.0.1 R66 merged
Updated Theme Engine
Fix for default Preferred SIM
A lot of fixes and improvements in system
I am currently using the ROM on Moto X 2014, can someone please flash and verify that this ROM is fully operational. It should be very fast and utilizes a very clean Marshmallow base.
Link to download ROM: http://corte.us/898938
Link to download NX GAPPS: http://corte.us/848438
http://nxrom.us/motog3.html
Developer +Anderson Aragão (sar4iva) https://plus.google.com/u/0/+AndersonAragãoDev
Reserved
---------- Post added at 12:33 AM ---------- Previous post was at 12:32 AM ----------
Will open gapps work with the ROM. I mean I have them handy or is it necessary to use NXgapps?
Downloading.
shawndak said:
Here is a Nexus Experience ROM for the Moto G 2015.
Changelog of Release 10.4:
Android 6.0.1 R66 merged
Updated Theme Engine
Fix for default Preferred SIM
A lot of fixes and improvements in system
I am currently using the ROM on Moto X 2014, can someone please flash and verify that this ROM is fully operational. It should be very fast and utilizes a very clean Marshmallow base.
Link to download ROM: http://corte.us/898938
Link to download NX GAPPS: http://corte.us/848438
http://nxrom.us/motog3.html
Developer +Anderson Aragão (sar4iva) https://plus.google.com/u/0/+AndersonAragãoDev
Click to expand...
Click to collapse
I flash that ROM time ago and works fine.
Arcade said:
Reserved
---------- Post added at 12:33 AM ---------- Previous post was at 12:32 AM ----------
Will open gapps work with the ROM. I mean I have them handy or is it necessary to use NXgapps?
Downloading.
Click to expand...
Click to collapse
You know what I've never tried! I do know the NX Gapps is very clean, just enough to get Google going.
shawndak said:
You know what I've never tried! I do know the NX Gapps is very clean, just enough to get Google going.
Click to expand...
Click to collapse
Will report back in 15min.
Awesome thanks brother please give free space available, fresh install ram usage and any likes/dislikes!!
shawndak said:
Awesome thanks brother please give free space available, fresh install ram usage and any likes/dislikes!!
Click to expand...
Click to collapse
OK but I have my college(indian colleges )
Will try to answer all these question in the evening.
Any bugs ?
VoLTE??
I know cm not support VoLTE So just asking this rom support or not???
Will come back soon. Great work for bringing Nx experience to moto g
Sent from my MotoG3 using XDA-Developers mobile app
Did this ROM support volt
I thought this is new ROM, but I've gone thru this. Not that great. Aosp Nougat Extended was better than this. Thanks btw. Any developer to bring pure nexus rom for moto g???[emoji2]
Sent from my MotoG3 using XDA-Developers mobile app
Jio volte problems here
http://forum.xda-developers.com/showthread.php?t=3484950
Sent from my MotoG3 using Tapatalk
Gapps link not working anyone face the same issue?
samirza692 said:
Gapps link not working anyone face the same issue?
Click to expand...
Click to collapse
Working here
This rom feels like a cm rom
Sent from my MotoG3 using Tapatalk
How about battery performance?
robot_head said:
This rom feels like a cm rom
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
curious what makes you say that?
The launcher is trebuchet. And the theme manager is the CM theme engine. And it has native root in the settings. It just doesn't feel like pure Nexus would feel
Sent from my MotoG3 using Tapatalk
robot_head said:
The launcher is trebuchet. And the theme manager is the CM theme engine. And it has native root in the settings. It just doesn't feel like pure Nexus would feel
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
i did notice the download size was a bit large...
any way to know if this was built from source? i see in the changelog that it is listed as such, but i am suspicious
Download:
https://file.sagit.cf/sagit/sagit/
Known bug:
I cant find any so far
Telegram Group:
https://t.me/SagitLne
(Join to get more info about the ROM and the new update)
Sources:
https://github.com/nitrogen-sagit
https://github.com/nitrogen-project
https://github.com/wloot
Donation:
https://www.paypal.me/wloot
捐赠:
https://donation.sagit.cf
Thanks:
Demon000, Wight554, Xyyx
Kek
What's MEH?
adey64 said:
What's MEH?
Click to expand...
Click to collapse
https://www.urbandictionary.com/define.php?term=Meh
Sent from my Xiaomi Mi 6 using XDA Labs
THX.
What version of the MIUI firmware do you recommend?
ars2580 said:
THX.
What version of the MIUI firmware do you recommend?
Click to expand...
Click to collapse
latest
any major bugs?
? [MEH], Features: IDK and kek above.. Standard wloot xd
Gapps needed or included?
Any details possible..(changelog, features..etc)?
Thanks
Update:
My flashing technique -
1. Reboot to TWRP (mine is 3.2.3-4-arian)
2. Wiped everything.
3. Format data and reboot to TWRP (if you cannot connect to your internal drive with PC, than repeat step #3)
4. Flash these things -
a) fw_sagit_miui_MI6_8.11.22_488193502d_8.0
b) The latest version (mine is - Nitrogen-OS-P-sagit-20181126-0010)
c) Open GAPPS (mine is - open_gapps-arm64-9.0-nano-20181126)
5. Wipe cache (option given in the same window - right after you flash the gapps)
6. Wait 1-2 (yes 1-2) minutes to boot.
7. Reboot to system before doing anything (just a good practice).
8. Press my "thanks" button and Let me know whether it worked....!!
Is wireless display working?
Update
I've flashed this Rom, it's excellent. But wireless display still leads to soft reboot it's seems to be a bug with all Android P Roms.
we have our ota server now: --> https://file.sagit.cf/sagit/sagit/
powered by microsoft cloud tho
wloot said:
we have our ota server now: --> https://file.sagit.cf/sagit/sagit/
powered by microsoft cloud tho
Click to expand...
Click to collapse
Wow brilliant! It's a great rom. Smooth and stock like with just the right custom options. Switched over from pixel experience which was buggy.
The only problem I'm having is gcam force closes.. Any ideas?
@wloot downloading from Chrome is blocked, it says the file is dangerous. Could be something wrong with the ota server.
xikz said:
@wloot downloading from Chrome is blocked, it says the file is dangerous. Could be something wrong with the ota server.
Click to expand...
Click to collapse
I agree.
Has anyone got wireless display to work without it causing a soft reboot?
adey64 said:
Wow brilliant! It's a great rom. Smooth and stock like with just the right custom options. Switched over from pixel experience which was buggy.
The only problem I'm having is gcam force closes.. Any ideas?
Click to expand...
Click to collapse
gapps + pixel3mod gcam it shold works
adey64 said:
Wow brilliant! It's a great rom. Smooth and stock like with just the right custom options. Switched over from pixel experience which was buggy.
The only problem I'm having is gcam force closes.. Any ideas?
Click to expand...
Click to collapse
wloot said:
gapps + pixel3mod gcam it shold works
Click to expand...
Click to collapse
Latest 5.3v12 version works fine without needing to install anything.
adey64 said:
Wow brilliant! It's a great rom. Smooth and stock like with just the right custom options. Switched over from pixel experience which was buggy.
The only problem I'm having is gcam force closes.. Any ideas?
Click to expand...
Click to collapse
Check if there is an activation module Gcam 2 API
Will there be a black color theme?
xikz said:
Latest 5.3v12 version works fine without needing to install anything.
Click to expand...
Click to collapse
Works thanks! Gcam is great
---------- Post added at 10:54 AM ---------- Previous post was at 10:53 AM ----------
wloot said:
gapps + pixel3mod gcam it shold works
Click to expand...
Click to collapse
Works thanks!