New OTA Update C432B565 - P8lite General

Got a FULL update by ota 1,51GB sized.
Log says better stability and improvements, some bugfixes and google security patches.
Not installed yet.

and C432B564 for dual sim, update size 213 mb, same changelog.

already installed on my P8 Lite Ale L21 Dual Sim... fix UI and stabilty... new interface for some apps of google and EMUI itself...

i'm installing right now ... could you please tell me that is it has light painting mode ?

Just installed B564, doesn't have light painting mode, but it has a "Professional Mode" where you can manually set ISO, AF, aperture, etc.

vhristenco said:
Just installed B564, doesn't have light painting mode, but it has a "Professional Mode" where you can manually set ISO, AF, aperture, etc.
Click to expand...
Click to collapse
you know how to root b564?

Haven't tried it yet, but flashing supersu from twrp should work.
Sent from Tapatalk

vhristenco said:
Haven't tried it yet, but flashing supersu from twrp should work.
Sent from Tapatalk
Click to expand...
Click to collapse
last time i was trying to flash supersu bricked my phone, so i prefer to have any tut to do this

damian12866 said:
you know how to root b564?
Click to expand...
Click to collapse
In 550 dual sim and 560 install TWRP 3.0.2 by ADB in fastboot mode and then first install SuperSu 2.64.zip version and after 2.69.zip version in TWRP mode.
Good luck

lokopepe said:
In 550 dual sim and 560 install TWRP 3.0.2 by ADB in fastmode and then SuperSu 2.64.zip and after 2.69.zip in TWRP mode.
Good luck
Click to expand...
Click to collapse
i was asking about b564 i don't want to have bricked phone again

damian12866 said:
i was asking about b564 i don't want to have bricked phone again
Click to expand...
Click to collapse
it will work perfectly.
Best regards

lokopepe said:
it will work perfectly.
Best regards
Click to expand...
Click to collapse
For sure?
What if i have already other version of TWRP?

fedek9001 said:
and C432B564 for dual sim, update size 213 mb, same changelog.
Click to expand...
Click to collapse
What version are you from before receive the OTA update?
Thanks

This thread is for single-SIM only. Please discuss Dual SIM (b564) in other Thread.
Can I Update from b199 to b565? Is there an official download-link for b565?
Regards
Gesendet von meinem ALE-L21 mit Tapatalk

damian12866 said:
For sure?
What if i have already other version of TWRP?
Click to expand...
Click to collapse
A moment, i try it and say you.
---------- Post added at 02:39 PM ---------- Previous post was at 02:32 PM ----------
x10i DauL said:
This thread is for single-SIM only. Please discuss Dual SIM (b564) in other Thread.
Can I Update from b199 to b565? Is there an official download-link for b565?
Regards
Gesendet von meinem ALE-L21 mit Tapatalk
Click to expand...
Click to collapse
My apologises. You are right

can you copy and share OTA packages B565 and B564?

B565 is for Single SIM, here's a screenshot of the changelog:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I received the OTA whilst on B551, haven't installed it as of yet.
Edit:
By tapping "Check for updates" you'll get the OTA posted above whilst on B551, though if you tap "Menu", then "Download latest full package" you'll get the option to download the full 1.51GB ROM update:

Btw the new professional mode could be used as light painting since you could adjust how long the shutter stays open. So yea try it.

i can't install the new ota update, is it because i have an unlocked bootloader ?

Well, i do have unlocked bootloader too but i successfully installed the b565 , try to download the full rom and not only the update itself, to download full rom just press menu, and press search for the latest update . . Well i was stock when i installed the rom, only unlocked bootloader.

Related

Zuk Z1 - General Discussion

Hello
Received my Zuk Z1 with a preliminary version of CM-12.1.
How root it?
Tried to install supersu-2.4.6-update.zip into the stock cm recovery but install fails due to signatures.
Thanks
hi would also like to know. can you make copy of the cm12 rom, my zuk on zui.
radii said:
hi would also like to know. can you make copy of the cm12 rom, my zuk on zui.
Click to expand...
Click to collapse
No problem to create a nandroid backup to you, but I need to root before
of course. i'm waiting for mine...i think it will come with zui though.
there used to be built in root on cyanogenmod, i'm sure someone knows...
where are you bought the ZUK? which side? is function normally regards bands? I come from Slovenia and I have doubt about bands...
tnx for info...
Bought in a Spanish retailer that have received only 6
The bands, and other info, is available at http://m.gsmarena.com/lenovo_zuk_z1-7511.php
@bartito
Can you please pull the build.prop and post it here?
Your best bet is waiting till the end of the month for the stable release of Cyanogen
Titokhan said:
@bartito
Can you please pull the build.prop and post it here?
Click to expand...
Click to collapse
Sorry, but eventually I returned to the seller.
He saw clearly that it was a final version of hardware with a preliminary version of software.
I'll buy when it goes on sale the stable version.
@bartito
Gosh! We missed a real chance to get the codename & unofficial firmware links directly from Cyanogen.
Anyway, please post it when you'll get the device again :good:
I rooted mine yesterday with kingroot.apk, 4.5.0 version.
Regards
Tiode said:
I rooted mine yesterday with kingroot.apk, 4.5.0 version.
Regards
Click to expand...
Click to collapse
cm or zui?
bartito said:
cm or zui?
Click to expand...
Click to collapse
cm preview 12.1 -YOG4PAP23E
Tiode said:
cm preview 12.1 -YOG4PAP23E
Click to expand...
Click to collapse
Mine was YOG4PAP1CG.
Have you received a OTA recently?
Has the annoying "cm preview" message at bottom-right dissapeared?
I received ota today, but i'm at work without charger, and only 20% of battery.
The ota says that I need almost 50%, 48,4 Mb of update.
Tiode said:
I received ota today, but i'm at work without charger, and only 20% of battery.
The ota says that I need almost 50%, 48,4 Mb of update.
Click to expand...
Click to collapse
Please, answer the question when updated. And also your impressions.
I'm really interested in this device
bartito said:
Please, answer the question when updated. And also your impressions.
I'm really interested in this device
Click to expand...
Click to collapse
Sure, I try to update at dinner.
Well, I have a problem with the ota.
Starts to apply, reboot and stuck in cm recovery.
I try to instal manually, and fails. Get an boot error, and says to reflash....
I have unroot , but not work.
Any idea?
---------- Post added at 04:10 PM ---------- Previous post was at 03:58 PM ----------
This is the message.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enviado desde mi X600 mediante Tapatalk
Tiode said:
cm preview 12.1 -YOG4PAP23E
Click to expand...
Click to collapse
Sorry for being a pest, but can you please post a copy of the build.prop?
Regarding the failed OTA, I've discussed the issue here: http://forums.yuplaygod.com/index.php?threads/15124/
You need to registered in the forum to read, so I've uploaded a PDF of the same: https://drive.google.com/file/d/0B9zZIJPXbMsubkFBYmZ4eGtMQjQ/view?usp=sharing
Titokhan said:
Sorry for being a pest, but can you please post a copy of the build.prop?
Regarding the failed OTA, I've discussed the issue here: http://forums.yuplaygod.com/index.php?threads/15124/
You need to registered in the forum to read, so I've uploaded a PDF of the same: https://drive.google.com/file/d/0B9zZIJPXbMsubkFBYmZ4eGtMQjQ/view?usp=sharing
Click to expand...
Click to collapse
Thanks a lot, tomorrow I try to extract build.prop and put a copy.
Enviado desde mi X600 mediante Tapatalk

[OTA UPDATE GRA-L09] Android 6.0 Marshmallow & EMUI 4.0 Download

Android 6.0 Marshmallow & EMUI 4.0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OTA-GRA-L09C432B313
Required for updating GRA-L09C432B200 !!!
Link: https://mega.nz/#!IEhCRaRR!GT6Ds9EywDoW5Dd8ZdKVesyQUItbiSwCPaapFhAenEY
Mirror : https://goo.gl/2s0pJe
Thanks to raider2k9
Change log:
B200 is required for updating, with B350 it fails at 4%!!!!
hi, thanks for your share ! this version have Touchplus option ?
deraiz12 said:
hi, thanks for your share ! this version have Touchplus option ?
Click to expand...
Click to collapse
Yes
Is it flashable with TWRP or do I need to go back to stock recovery?
How i have to do update- local or with 3 buttons
just make a /dload directory in your internal storage, put the zip with update there and update it through local update
mutaf said:
Android 6.0 Marshmallow & EMUI 4.0
OTA-GRA-L09C432B313
Required for updating GRA-L09C432B200 !!!
Link: https://mega.nz/#!IEhCRaRR!GT6Ds9EywDoW5Dd8ZdKVesyQUItbiSwCPaapFhAenEY
Mirror : https://goo.gl/2s0pJe
Thanks to raider2k9
Change log:
Click to expand...
Click to collapse
Hi guys, but this firmware is the ufficial update? That will go OTA in Europe?
zar marco said:
Hi guys, but this firmware is the ufficial update? That will go OTA in Europe?
Click to expand...
Click to collapse
yep, that the official one, betatesters receive
raider2k9 said:
yep, that the official one, betatesters receive
Click to expand...
Click to collapse
Ok, thanks. I'm registered at betatesters's program
Inviato dal mio SGP321 utilizzando Tapatalk
Is it possible to go from B350 to B200, then instaling B313? And if yes, could anyone plz provide a B200 donwload link?
olegulen said:
Is it possible to go from B350 to B200, then instaling B313? And if yes, could anyone plz provide a B200 donwload link?
Click to expand...
Click to collapse
Well if you have time you can do it like me... I had a link with full B200 but lost it so I installed B170 from here - if you are on B350, you probably already used this method - and then updated to B200 via OTA and then to marshmallow... It takes a while though.
please, i am on b200 and created the dload folder in internal storage. the update incremental is relevated by updater but when restart in recovery "the ota don't find update.zip".... what can be? thanks
edit: solved inserting dload folder in external sd card
please, how to disable logservice tip???
thanks
myabc said:
please, how to disable logservice tip???
thanks
Click to expand...
Click to collapse
I just swipe it away and it never show again
one81 said:
I just swipe it away and it never show again
Click to expand...
Click to collapse
yes but only temporarly... at reboot it launches again. that log must be permanently disabled for privacy!
myabc said:
yes but only temporarly... at reboot it launches again. that log must be permanently disabled for privacy!
Click to expand...
Click to collapse
remember it´s a beta for testing purpose.. I think you can´t disable it to 100% because it collect information about crash, performance
when i go to install this, it says there is no update.app present and now i am stuck in a bootloop. anyone got any ideas?
brezzz said:
when i go to install this, it says there is no update.app present and now i am stuck in a bootloop. anyone got any ideas?
Click to expand...
Click to collapse
you have to flash the update.zip, not extracted update.app.. since this isn´t a full release!
In a bootloop you have to flash via fastboot the extracted boot.img, recovery.img and system.img from b200 full to get your device back to work
Can someone posts screenshots from battery stats.

New Update Zuk Cyanogen

Just receieved a new ota update about 300mb. I have latest CM 12 which ia yog4pas3oh. I can t install the update. Where can i download the ota so that i can install via twrp?
Extentho said:
Just receieved a new ota update about 300mb. I have latest CM 12 which ia yog4pas3oh. I can t install the update. Where can i download the ota so that i can install via twrp?
Click to expand...
Click to collapse
i see no updates on official COS site, are you the only one lucky man that recieved the ota?
BTW, you should have installed the cyanogen recovery to flash the ota
maryankomar said:
i see no updates on official COS site, are you the only one lucky man that recieved the ota?
Click to expand...
Click to collapse
Here is proof
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also, i managed to download the ota file. I will put a link to it tomorrow.
Extentho said:
Here is proof
Also, i managed to download the ota file. I will put a link to it tomorrow.
Click to expand...
Click to collapse
Thanks for the OTA
Do you know if it's MM update?
Don't know, i will post link ASAP, but i will install it tommorow via TWRP. I think it s a Marshmallow update. If anyone installs it this night, post the version.
Just installed it. It wasn't update I was waiting for: http://m.imgur.com/wgXimar
Extentho said:
Don't know, i will post link ASAP, but i will install it tommorow via TWRP. I think it s a Marshmallow update. If anyone installs it this night, post the version.
Click to expand...
Click to collapse
Another user updated it, and it's not COS13
Here is the link to donwload the ota. It is not encrypted and it is not MM. we will have to wait for Marshmallow .....https://mega.nz/#!vdcQhSQZ
EDIT: New link for download on Google Drive:https://drive.google.com/file/d/0B2thP-WQlWCNX1dTMl9HNmx2cHM/view?usp=sharing
is it capable to flash over twrp ? i don't think so
what is the differences with previous version ? anybody know ?
tulalhyt said:
is it capable to flash over twrp ? i don't think so
what is the differences with previous version ? anybody know ?
Click to expand...
Click to collapse
No it can t be flashed with twrp, just tried and couldn t. if anyone has any idea about how we could install this ota, please tell us.
Extentho said:
Here is the link to donwload the ota. It is not encrypted and it is not MM. we will have to wait for Marshmallow .....https://mega.nz/#!vdcQhSQZ
Click to expand...
Click to collapse
Need key .
Gonzaman said:
Need key .
Click to expand...
Click to collapse
There is no encryption. Press x and close that dialog box
Extentho said:
There is no encryption. Press x and close that dialog box
Click to expand...
Click to collapse
only app can be use.
Gonzaman said:
only app can be use.
Click to expand...
Click to collapse
I ll try put another link... Mega seems broken. Anyway., it is pretty useless because the update can t be flashed with twrp
just flash stock recovery .
---------- Post added at 09:42 AM ---------- Previous post was at 09:26 AM ----------
Extentho said:
I ll try put another link... Mega seems broken. Anyway., it is pretty useless because the update can t be flashed with twrp
Click to expand...
Click to collapse
PLZ use google .
after receiving an update explain how to install it . I have not yet come .
Extentho said:
Here is the link to donwload the ota. It is not encrypted and it is not MM. we will have to wait for Marshmallow .....https://mega.nz/#!vdcQhSQZ
Click to expand...
Click to collapse
Password?
I am checikng my Zuk, but didnt received ny update yet...any idea ?
i had this already installed on my zuk z1
What are changelogs ..? Any one shareplz..
New download link on Google Drive: https://drive.google.com/file/d/0B2thP-WQlWCNX1dTMl9HNmx2cHM/view?usp=sharing

Mate9 EMUI5.0 B211 HRT_Kangvip

Updated kangvip to version M9_B211
Download M9_B211_Кangvip: https://drive.google.com/file/d/0BxUuiDq_FRA_SGFyWFZTNWY2dFk/view?usp=sharing
Original link http: //cn.club.vmall.com/thread-12639964-1-1.html
I've flashed it now. I'll prove that it works
Im totally confused about this phone, too many versions, Im on C635 and I cant find what rom I should use without bricking my phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
sorry but how to flash this rom? Does it require some special band? Im on C635 (japan) and I have already unlocked the bootloader but I dont know what to do next. Please help me! Thanks!
lemonade747 said:
sorry but how to flash this rom? Does it require some special band? Im on C635 (japan) and I have already unlocked the bootloader but I dont know what to do next. Please help me! Thanks!
Click to expand...
Click to collapse
I have L29C567B183 and I flashed this rom B211. It booted up however many functions does not work properly for example I cannot get into developer option, backup and restore will reboot the phone, fingerprinting does not work, .... I flashed Kangvip B186 without problem. I do not think it will work properly on your phone unless your firmware is up to date (B211).
[email protected] said:
I have L29C567B183 and I flashed this rom B211. It booted up however many functions does not work properly for example I cannot get into developer option, backup and restore will reboot the phone, fingerprinting does not work, .... I flashed Kangvip B186 without problem. I do not think it will work properly on your phone unless your firmware is up to date (B211).
Click to expand...
Click to collapse
Thanks for your information. Im on b130 and I have no idea why it cant see any updates on my phone, maybe it's C635 not so popular. btw could you please give me a link to that Kingvip rom b183? I couldnt find it in this forum. Thanks!:fingers-crossed:
lemonade747 said:
Thanks for your information. Im on b130 and I have no idea why it cant see any updates on my phone, maybe it's C635 not so popular. btw could you please give me a link to that Kingvip rom b183? I couldnt find it in this forum. Thanks!:fingers-crossed:
Click to expand...
Click to collapse
There is no Kangvip B183 for Mate 9. Only Kangvip B175, B186, and B211. I am on C567B183 and I flashed KangVip B186 without problem. Since you are on B130 you should start with Kangvip B175 and see if it works.
bscnym said:
Click to expand...
Click to collapse
how to get that windows on screen. cant see any options for that window view on ksettings
got it on adb type: adb shell settings put global enable_freeform_support 1 and reboot then press recent an select square button next to lock app button
nougat freeform move can also be achieved by downloading Root Essentials, scrolling to the interface tab, and selecting freeform mode..
Sent from my MHA-L29 using Tapatalk
lemonade747 said:
sorry but how to flash this rom? Does it require some special band? Im on C635 (japan) and I have already unlocked the bootloader but I dont know what to do next. Please help me! Thanks!
Click to expand...
Click to collapse
you must have base rom B211 for flash rom kangvipB211. I think you must rebrand to rom china and update ota to B211.
Anybody here already testing it? Any clue if the GPS bug is solved?
rsm86 said:
Anybody here already testing it? Any clue if the GPS bug is solved?
Click to expand...
Click to collapse
I have C567B183 I flashed this rom (B211). It booted up but some functions did not work properly. However I just flashed the boot image from Kangvip 186 and everything works fine.
Maybe auras76 thinking ahead on RomAur 1.6??

B381 OTA

I'm the only one who has received B381 OTA update?
I downloaded it last night.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
cortez140369 said:
I'm the only one who has received B381 OTA update?
I downloaded it last night.
Click to expand...
Click to collapse
What was your previous build number ? I'm curious, cause I just updated my B160 to B370 manually. Is there any difference between the 370 and 380 builds ?
Ban9itS said:
What was your previous build number ? I'm curious, cause I just updated my B160 to B370 manually. Is there any difference between the 370 and 380 builds ?
Click to expand...
Click to collapse
B371
Whats Improved? Battery? And is App Twin Available in this version or not?
Usama707 said:
Whats Improved? Battery? And is App Twin Available in this version or not?
Click to expand...
Click to collapse
In open setting there isn't the App twin option.
I wonder is this means b380/b381 will now be usable via FF.
zgomot said:
I wonder is this means b380/b381 will now be usable via FF.
Click to expand...
Click to collapse
I don't Know. I'm stock.
Yesterday i search for update and i see OTA notification (370MB) with relative log
(Sorry for english)
I pushed b380 to system updater in FF and it's downloading, I'll let you know if it works soon enough.
Nothing here
Doesn't work with FF. Same failure to authenticate. sadface.jpg
Any improvement in battery consumption? Is Android OS usage reduced now?
Screen from Option -> Battery
Usama707 said:
Any improvement in battery consumption? Is Android OS usage reduced now?
Click to expand...
Click to collapse
If you will pay attention he has vns-l31
hexisg said:
If you will pay attention he has vns-l31
Click to expand...
Click to collapse
Yes, confirm.
But I have not heard anyone who has updated via OTA to the B381 with any version.
It was my initial question
Guys, I need some help. I need to flash the stock kernel in order to update OTA, but I can't find it anywhere... I tried to flash the one in the b381 update but I had problems unlocking the phone since the code was not recognised, and had to remove it with adb. Could anyone give me a link to the b371 stock boot.img and recovery.img? My internet connection sucks and I can't dowload tho whole firmware to extract the images
I got OTA to B380 too , but I got bootloop after updating , so f**k huawei and they'r OTA services
hexxr said:
I got OTA to B380 too , but I got bootloop after updating , so f**k huawei and they'r OTA services
Click to expand...
Click to collapse
What you doing now with phone
If he working any new futures
hexxr said:
I got OTA to B380 too , but I got bootloop after updating , so f**k huawei and they'r OTA services
Click to expand...
Click to collapse
It's impossible to have a bootloop after an OTA update
Johnny TDN said:
It's impossible to have a bootloop after an OTA update
Click to expand...
Click to collapse
Maybe it bootloop bcs after the reset phone went into twrp and updated there
---------- Post added at 10:45 AM ---------- Previous post was at 10:44 AM ----------
radwan020 said:
What you doing now with phone
If he working any new futures
Click to expand...
Click to collapse
I got it working , no worries
I got an ota update but can't install giving me error. Is it bcz of my bootloader unlocked , rooted and twrp recovery ???

Categories

Resources