Hy guyz today am gonna show you how to flash recovery and root huawei p8 lite(ALE-L21)[Lollipop].
Things required
______________________
1_ p8lite with minimum 50% charge.
2_ twrp (download from the link below)
3_supersu (download from link below)
4_adb
5_ p8 lite drivers installed
6_bootloader unlocked(important)
_____________________________________________________
warning:- Rooting and flashing custom recovery may void your warranty. or even lead brick.
make sure that you do it in your own risk.
i have tested this in my huawei p8 lite and it works withous any problem.
i will not be responsible for any damage done to your device.
_______________________________________________________________-
now lets start.
1. first download adb and install it to c drive.
2. and copy twrp file to same directory.
3. Goto the directory where you installed adb and right click on blank space.
4. this will show you an option to open cmd over there.
5. now plug in your device and make sure that all drivers are installed properly.
6. now goto the cmd windows that we opened before and type these commants.
Type these commands
------------------------------------------------------
1. adb devices (these will show the device connected to the pc).
2. adb reboot bootloader (this will boot into bootloader make sure that your bootloader is unlocked)
3. fastboot flash recovery twrp.img(this will flash twrp)
4. fastboot reboot(now this will reboot your device)
---------------- now you have flashed your p8 lite with twrp-----------------------------
Rooting
--------------------
1. copy the supersu file which we downloaded before to phones memorycard.
2. now go to adb and type these commands.
3. adb devices
4. adb reboot recovery
5. now this will boot your device to twrp.
6.now got install option .
7. locate the supersu file and flash.
8.clear dalvik and cache.
9. reboot your device.
thts it you have flashed twrp and supersu.
=-------------------------------------------
links__
This would be helpful if I could flash TWRP recovery, but I can't as I wrote in this post (http://forum.xda-developers.com/p8lite/help/help-rooting-p8-lite-ale-l21-dual-sim-t3391567) so.....
doomking_99 said:
This would be helpful if I could flash TWRP recovery, but I can't as I wrote in this post (http://forum.xda-developers.com/p8lite/help/help-rooting-p8-lite-ale-l21-dual-sim-t3391567) so.....
Click to expand...
Click to collapse
This would help you to flash twrp. Read it carefully ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my ALE-L21 using XDA-Developers mobile app
nayeemudheen said:
This would help you to flash twrp. Read it carefully ?
Sent from my ALE-L21 using XDA-Developers mobile app
Click to expand...
Click to collapse
You didn't even read his problem, right?
Azaradel said:
You didn't even read his problem, right?
Click to expand...
Click to collapse
ya i cant access to his post. it showing thread is not available
Sent from my ALE-L21 using XDA-Developers mobile app
doomking_99 said:
This would be helpful if I could flash TWRP recovery, but I can't as I wrote in this post (http://forum.xda-developers.com/p8lite/help/help-rooting-p8-lite-ale-l21-dual-sim-t3391567) so.....
Click to expand...
Click to collapse
i cant access the link which you gave . it showing the thread is removed.
Sent from my ALE-L21 using XDA-Developers mobile app
nayeemudheen said:
i cant access the link which you gave . it showing the thread is removed.
Sent from my ALE-L21 using XDA-Developers mobile app
Click to expand...
Click to collapse
Again, send me the download link please, I will add it to the OP. Otherwise I'll need to close this thread.
Please don't ask xda members to email you for links. :good:
Thanks!
when i tried to post link xda didnt allow me . so i was force to give my mail. i will give you the link for all of my post within a weak . thank you
Sent from my ALE-L21 using XDA-Developers mobile app
nayeemudheen said:
when i tried to post link xda didnt allow me . so i was force to give my mail. i will give you the link for all of my post within a weak . thank you
Sent from my ALE-L21 using XDA-Developers mobile app
Click to expand...
Click to collapse
When you have links for your threads, message me, and we can add them to the Opening posts. :good:
Until then, thread closed for now.
Cheers,
Darth
Senior Moderator
Related
Hello Guys
I present you Carliv Touch Recovery 3.0 for XOLO HIVE 8x-1000 and XOLO Play 8x-1100.
Thanks to Carliv for his amazing guide and his recovery and most importantly his hardwork and dedication towards MTK users . Please donate to him if you can or hit thanks for his awesome work:good:
An older version of recovery(ies) for 8x-1000 and 8x-1100 can be found here -> CTR and TWRP for 8x-1000 and 8x-1100
Rooting guide can be found here by bgos10(thanks to him) and a guide to root with CWM recovery for 8x-1000 can be found here by me.
By rooting you void your warranty and by flashing this you will brick your device, LOL jk but if you don't follow the thread's instruction properly you may brick your device.
So let's get to it.
Download recovery for your device from below
XOLO HIVE 8x-1000 CTR 3.0
XOLO Play 8x-1100 CTR 3.0
Installation via Mobile, NO PC Required
1) Download Rashr or Mobile Uncle from Play Store. (Please note these steps are for Rashr, if Rashr shows any error just ignore them close and again restart Rashr and it'll work)
2) Keep the downloaded recovery in your SD card and choose option "Recovery from storage" now open it and choose your recovery where you placed it.
3) Now just flash it now Rashr will ask option to reboot into recovery just select "Yes" if you want to boot.
To boot into recovery at a later stage from a switched off device press and hold POWER+VOLUME UP button and keep them pressed until you boot into recovery.
Working
Adb Works perfectly
Backup restore works
System Data etc all partitions mount properly
Zip installs perfectly
Not Working
Nothing found as of now
Click to expand...
Click to collapse
Code:
[B]BUGS
Not Known any yet, recovery is stable as of now let me know if you find any[/B]
Code:
[B]Credits
[COLOR="red"]Carliv for his recovery and porting guide
Bgos10 for his rooting guide
Me for the flashing guide and recovery I suppose :silly:[/COLOR][/B]
If you have any doubt or any question related feel free to ask.
Hey don't just download and go away :silly: Hit thanks too
Screenshots
Screenshots
I edited the background a bit rest is everything as Carliv made.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Reserved
Tech N You said:
Reserved
Click to expand...
Click to collapse
Awesome work bro and may i know when can i get hive??? Pls... @Tech N You
Sent from my Play8X-1100 using XDA Free mobile app
Ashok sha said:
Awesome work bro and may i know when can i get hive??? Pls... @Tech N You
Sent from my Play8X-1100 using XDA Free mobile app
Click to expand...
Click to collapse
It's already ported
Tech N You said:
It's already ported
Click to expand...
Click to collapse
Hive already ported?...bro can u pls send me the link plsssss....i googled it but not showing plssssssss bro..... @Tech N You
Sent from my Play8X-1100 using XDA Free mobile app
Ashok sha said:
Hive already ported?...bro can u pls send me the link plsssss....i googled it but not showing plssssssss bro..... @Tech N You
Sent from my Play8X-1100 using XDA Free mobile app
Click to expand...
Click to collapse
Wait it is still in testing mode
Sent from my 8x-1000 using XDA Free mobile app
cannot download from box.net
please upload to alternate location as bandwidth limit seems to have reached
Which one will I use for my Infinix Zero X506? Thanks.
pokemaniac15 said:
Which one will I use for my Infinix Zero X506? Thanks.
Click to expand...
Click to collapse
Install the one for 8x-1000.
Procedure for installing Xposed into the Zuk Z1
In this thread we will discuss how to install Xposed in this new device
Everybody are Welcome!
MANY THANKS TO OUR MODERATORS TO OPEN AGAIN THIS THREAD !
More attention to the Xda-developers Rules:
http://forum.xda-developers.com/announcement.php?f=256
Many thanks to "SUPER ADMIN" MR. MIKE
Procedure
Download the following packages Zip:
Xposed arm v78 sdk 22 (NEW):
http://forum.xda-developers.com/attachment.php?attachmentid=3543415&d=1447616638
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
xposed installer 3 alpha 4
http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
Gravitybox lol version 533 (new):
http://forum.xda-developers.com/attachment.php?attachmentid=3556807&d=1448613624
Link to xposed update page if previous link are broken :
http://forum.xda-developers.com/showthread.php?t=3034811
Link to xposed update page if previous link are broken :
http://forum.xda-developers.com/xposed/modules/app-gravitybox-v5-0-0alpha-tweak-box-t3037566
Attention to the type of your phone!
Procedure..
1) Copy the files Xposed arm v.75xxx.zip on the phone's internal memory.
2) reboot your phone in recovery mode( Cwm or twrp recovery modded previous installed )
3) select install zip file and select the file and install Xposed arm V.75 xxxx.zip
4) reboot the phone and returned in Android OS
(wait more time )
5) with an application root type browsers installed Xposed installer 3 Alpha 4.apk
6) and restart the return to Android
7) Then if you want to install the GravityBox repeat the procedure from step 5 and restart.
8) to return Xposed launched app and verify that the flag has gravityBox otherwise not be 'active and not start' and restart again
9) The gravityBox will return to 'active!
reserved1
Is it actually working? I've read about bootloops.
Thanks.
Inviato dal mio D6603 utilizzando Tapatalk
vittogn said:
Is it actually working? I've read about bootloops.
Thanks.
Inviato dal mio D6603 utilizzando Tapatalk
Click to expand...
Click to collapse
Yes of course.. I have using it!
Sent from my GT-I9505 using XDA Free mobile app
Page not found for all 3 downloads? And a search of the site would not find me the files, any one have the files I can borrow?
ghost45 said:
Yes of course.. I have using it!
Sent from my GT-I9505 using XDA Free mobile app
Click to expand...
Click to collapse
Hi friend! i have a question for you. I have recently bought the lenovo zuk z1, for this procedure i have need a TWRP? or i have need only of root and i can flash the file with the original recovery? thank
Droid_Nut said:
Page not found for all 3 downloads? And a search of the site would not find me the files, any one have the files I can borrow?
Click to expand...
Click to collapse
Updated the links in first page!
dani.9 said:
Hi friend! i have a question for you. I have recently bought the lenovo zuk z1, for this procedure i have need a TWRP? or i have need only of root and i can flash the file with the original recovery? thank
Click to expand...
Click to collapse
According to Ghost you need TWRP.
any idea which exposed can make like this :-
1. carrier label on the left corner
2. show cpu info on the up right
gamal001 said:
any idea which exposed can make like this :-
1. carrier label on the left corner
2. show cpu info on the up right
Click to expand...
Click to collapse
I never see these informations.....
Sent from my GT-I9505 using XDA Free mobile app
gamal001 said:
any idea which exposed can make like this :-
1. carrier label on the left corner
2. show cpu info on the up right
Click to expand...
Click to collapse
To the "carrier label" i don't know. To show cpu info use the module "Network Speed Indicator" http://repo.xposed.info/module/tw.fatminmin.xposed.networkspeedindicator
i'm trying the
xposed-v79-sdk23-arm.zip
from the mirror link 1st page .... but it can't be flash from my twrp, since the primary link provided not available, than i try using xposed.zip that is available from Zuk Z1 Toolkit 0.5.2 BETA [WIN][MAC] (from javirenart) and its flashed ...
tulalhyt said:
i'm trying the
xposed-v79-sdk23-arm.zip
from the mirror link 1st page .... but it can't be flash from my twrp, since the primary link provided not available, than i try using xposed.zip that is available from Zuk Z1 Toolkit 0.5.2 BETA [WIN][MAC] (from javirenart) and its flashed ...
Click to expand...
Click to collapse
Hi...... The file xposed sdk 23 is for Marshmallow.. Not for lollipop.
Sent from my GT-I9505 using XDA Free mobile app
thanks a lot it works
finally, someoane make this tutorial,..
Thank You..
Is it work on android 6.0.1?
Sent from my Z1 using XDA-Developers mobile app
hello, is there anybody using xposed with zui marsmalow ?
gamal001 said:
any idea which exposed can make like this :-
1. carrier label on the left corner
2. show cpu info on the up right
Click to expand...
Click to collapse
Which theme are u using?
Oops
Hi guys,
After searching high and low for a custom recovery for my phone the Huawei Y6 all I could find was a chinese cwm.
So I thought to myself "here's an opportunity to start building twrp" and now here it is.
TWRP 2.8.7.0 built using Huawei kernel source, Cyanogenmod 12.1 source and Omnirom bootable recovery source.
Everything works so far including mtp, adb, backup, restore, zip flash etc.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is my kernel source and device config for those interested.
https://github.com/DestructoSphere/android_kernel_huawei_msm8909
https://github.com/DestructoSphere/android_device_huawei_y6twrp
1, Unpack zip archive DO NOT try to flash it.
2, Flash unpacked twrp.img with your preferred method (I test using fastboot boot twrp.img then when confirmed fastboot flash recovery twrp.img)
Thanks to:
Teamwin and Omnirom for the twrp source
Cyanogenmod for the cm 12.1 source
Huawei for the kernel source
Will this work on SCL-L01?
Sent from my GT-I5500 using XDA Free mobile app
Good work!
But it doesn't work with SCL-L21: no touch!
nicolap8 said:
Good work!
But it doesn't work with SCL-L21: no touch!
Click to expand...
Click to collapse
Can you upload your stock recovery and post the output of
Code:
cat /proc/app_info
Costiin said:
Will this work on SCL-L01?
Sent from my GT-I5500 using XDA Free mobile app
Click to expand...
Click to collapse
Give it a go and let me know if you have any problems
this recovery works for SCL-L03?
DestructoSphere said:
Can you upload your stock recovery and post the output of
Code:
cat /proc/app_info
Click to expand...
Click to collapse
Thanks, I already managed the thing!
TWRP for Y6 SCL-L21
I have a question, I have my huawei Y6 SCL-L03 with bootloader unlocked, and I want to try this recovery, can you help me telling me how I can copy the recovery.img stock currently have, and then flash this recovery and if something goes wrong to return to the stock recovery SCL-L03.
TheMasterMindGT said:
I have a question, I have my huawei Y6 SCL-L03 with bootloader unlocked, and I want to try this recovery, can you help me telling me how I can copy the recovery.img stock currently have, and then flash this recovery and if something goes wrong to return to the stock recovery SCL-L03.
Click to expand...
Click to collapse
IMPORTANT: for testing you DON'T need to flash the recovery!
Use the command:
fastboot boot mynewrecovery.img
nicolap8 said:
IMPORTANT: for testing you DON'T need to flash the recovery!
Use the command:
fastboot boot mynewrecovery.img
Click to expand...
Click to collapse
I'm looking to make a backup of the stock recovery SCL-L03. If this version does not work.
I have tested in my Huawei Y6 SCL-L03 with the command
fastboot boot mynewrecovery.img
But the touch gives problems do not let any action.
It is possible to fix this problem?
i have succesfully flashed TWRP on Huawei Y6 SCl-L01 but the touchscreen is working only if i press multiple times the buttons in TWRP....how can i make it work normally?
DestructoSphere said:
Can you upload your stock recovery and post the output of
Code:
cat /proc/app_info
Click to expand...
Click to collapse
Can you both please do this for me?
DestructoSphere said:
Can you both please do this for me?
Click to expand...
Click to collapse
Warmly, just tell me where should I run this code from ADB? from BOOTLOADER?
Run it via adb or terminal on your running system.
TheMasterMindGT said:
Warmly, just tell me where should I run this code from ADB? from BOOTLOADER?
Click to expand...
Click to collapse
If you has adb working this is the simplest:
adb pull /proc/app_info
You can also copy the file to sd from a terminal (even without root).
@nicolap8 Out of curiosity how did you resolve your touchscreen?
Did you unpack and repack with your stock kernel or did you compile from source?
I unpacked the chinese version and copied from your the ramdisk\twres folder.
Repacked and worked! :victory:
Sent from my HUAWEI SCL-L01 using XDA-Developers mobile app
---------- Post added at 01:11 PM ---------- Previous post was at 12:35 PM ----------
https://www.dropbox.com/sh/kd44jsu5ip4ywzn/AAC6zCESIouee4Dlu4xtWDYHa?dl=0 and here is my stock recovery
Costiin said:
is this what you need?
Click to expand...
Click to collapse
From a point of view, yes. But is very difficult to read: we want to help you but you need to do something better!
Read the previous messages and post the file, not the screenshot!
I am using canvas a1 and Android ver. 6.0.1
I just unlocked bootloader so first tell me how it's menu looks. I don't know how it looked but i am attaching pic of my phone recover mode menu look.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Second thing when every i tried to install zip file like SUPER SU or thundar zip and cm13 its show a error like below pic that i atteced. In this pic error in the bottom of screen
All over i wants to install CM 13 on my mobile that i downloaded from CM official site
Thanks
Sent from my Micromax AQ4501 using XDA-Developers mobile app
First you need to flash twrp recovery to flash custom roms and zips
I already flashed twrp recovery.img using fastboot
Sent from my Micromax AQ4501 using XDA-Developers mobile app
Tyaginator said:
First you need to flash twrp recovery to flash custom roms and zips
Click to expand...
Click to collapse
I already flashed twrp.img
Sent from my Micromax AQ4501 using XDA-Developers mobile app
Have you unlocked bootloader before flashing flashing, cuz the recovery in your attached images is stock recovery
Yes i unlocked bootloader to using command
Sent from my Micromax AQ4501 using XDA-Developers mobile app
Tyaginator said:
Have you unlocked bootloader before flashing flashing, cuz the recovery in your attached images is stock recovery
Click to expand...
Click to collapse
Can you tell me full process of unlocking bootloader so i can do it again
By the way i did this process by using comand
Sent from my Micromax AQ4501 using XDA-Developers mobile app
First boot your phone into fastboot mode
Then,
fastboot oem unlock
After completing,
fastboot flash recovery twrp.img
Tyaginator said:
First boot your phone into fastboot mode
Then,
fastboot oem unlock
After completing,
fastboot flash recovery twrp.img
Click to expand...
Click to collapse
Ok after trying that i will tell you thanks
Sent from my Micromax AQ4501 using XDA-Developers mobile app
Tyaginator said:
First boot your phone into fastboot mode
Then,
fastboot oem unlock
After completing,
fastboot flash recovery twrp.img
Click to expand...
Click to collapse
Thanks for help now I am at cm 13 but getting problems about gapps I tried many but not working. I installed a nano pack from XDA named a-gapps but getting error like "play store stops working " and can't uninstall that gapps I even reinstalled the cm 13
himanshubarala said:
Thanks for help now I am at cm 13 but getting problems about gapps I tried many but not working. I installed a nano pack from XDA named a-gapps but getting error like "play store stops working " and can't uninstall that gapps I even reinstalled the cm 13
Click to expand...
Click to collapse
Opengapps.org
ARM 6.0 Pico
Tyaginator said:
Opengapps.org
ARM 6.0 Pico
Click to expand...
Click to collapse
Thanks bro
Can you send me the Recovery File.
I can't find the right Recovery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP custom recovery for the Samsung Galaxy J3(2016) SM-J320H. Spreadtrum SC8830A.
Latest build is 3.0.2-1
Disclaimer: you flash these at your own risk. Knox counter will be tripped. Having the stock firmware to hand is also advised.
NOTE: BEFORE MAKING MODIFICATIONS, ON SOME ANDROID 5.1.1/6.0 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
UPDATE 26/10/2016: GUI lag fix.
Lag in the GUI should now be gone. Please someone confirm.
MTP fix
To install TWRP:
Boot to DOWNLOAD mode.
Flash with ODIN in the AP slot.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing when ODIN says PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
You should now see TWRP recovery.
twrp_3.0.2-1_sm-j320h_261016
For Systemless Root with SuperSu.
1. Install Supersu via TWRP
SR1-SuperSU-v2.78-SR1-20160915123031
2 . Flash the PRE-ROOTED boot image below with ODIN(AP slot) or TWRP(extract boot.img first from tar file). Current version is [SR1-SuperSU-v2.78-SR1-20160915123031].
Sm-j320h_patched_boot_211016
3. Reboot
4. Check you have root
XDA SAMSUNG J3 SUPPORT FORUM:
http://forum.xda-developers.com/t/galaxy-j3-2016
PLEASE LEAVE FEEDBACK IF YOU FIND MY WORK USEFUL. THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
Thank you, thank you very much for helping us to root this device
Sent from my SM-J320H using XDA-Developers mobile app
It was my fault, instead of choosing wip cash, i've chosen factory reset. Thank you again
Sent from my SM-J320H using XDA-Developers mobile app
Just rooted REALLY BIG THANKS dude
Gotta do some new stuff now
ashyx said:
Please post your comments below.
http://forum.xda-developers.com/android/development/twrp-3-0-2-1-samsung-galaxy-j3-2016-sm-t3485679
Click to expand...
Click to collapse
I posted this TWRP on my blog ( very famous in middle easy ) and i mentioned your PayPal E-Mail in order if anyone wanna donate you or buy you some beer.
Thanks again dude and we're waiting for J200H TWRP.
thank you pro it works awesome :good:
mine gets stuck on the downloading part heh
UPDATE 26/10/2016: GUI Lag fix and MTP fix.
Could someone confirm both fixes are working?
.
does it work on the verizon model?
Daleto said:
does it work on the verizon model?
Click to expand...
Click to collapse
Unfortunately not, Verizon devices have locked bootloaders.
ashyx said:
UPDATE 26/10/2016: GUI Lag fix and MTP fix.
Could someone confirm both fixes are working?
.
Click to expand...
Click to collapse
working perfectly. 1000 thanks
( CPU still shows 0)
Sent from my SM-J320H using XDA-Developers mobile app
---------- Post added at 05:58 AM ---------- Previous post was at 05:50 AM ----------
just a question sir, is there any way to get official samsung updates to a rooted device
Sent from my SM-J320H using XDA-Developers mobile app
walid77dz said:
working perfectly. 1000 thanks
( CPU still shows 0)
Sent from my SM-J320H using XDA-Developers mobile app
---------- Post added at 05:58 AM ---------- Previous post was at 05:50 AM ----------
just a question sir, is there any way to get official samsung updates to a rooted device
Sent from my SM-J320H using XDA-Developers mobile app
Click to expand...
Click to collapse
You can use ODIN and download the firmware or simply restore the stock boot image. As long as your system partition remains untouched you will then be able to download the ota.
Hi, guys...! I need help to make my GALAXY J3 (6) statusbar of clock move to centred. I search this thread but no one is done, I'm using apktool for PC, and try to edit SystemUI but is not work. If you have a thread to resolved this MOD please tell me...
my unit stated J320-G. Can it be done?
chteh0721 said:
my unit stated J320-G. Can it be done?
Click to expand...
Click to collapse
What are your specs?
ashyx said:
UPDATE 26/10/2016: GUI Lag fix and MTP fix.
Could someone confirm both fixes are working?
.
Click to expand...
Click to collapse
works awesome now without any lag thank you
just one question are there's any news about any custom rom for this device ?
Does it work for J320-F?
JagadSanka' said:
Does it work for J320-F?
Click to expand...
Click to collapse
no pro it's only for SM-J320H
Try this link it might help you
link :https://www.youtube.com/watch?v=qxrQb5ooLFs
thanks brother i rooted my galaxy j320h
Thanks for this work and can you make a custom roms for this device
agustriwidodo1981 said:
Hi, guys...! I need help to make my GALAXY J3 (6) statusbar of clock move to centred. I search this thread but no one is done, I'm using apktool for PC, and try to edit SystemUI but is not work. If you have a thread to resolved this MOD please tell me...
Click to expand...
Click to collapse
I have a bunch of ui mods even 3minitbatterymod hit me up in pm
Sent from my SM-J320R4 using Tapatalk