Hi all please help me to fix this problem.
I'm wipe all things and forget to backup.
When I restart my phone it's stuck at Nubia logo boot loader.
When I press volume - and power it's to fastboot mode but when i choose reboot to recovery mode or reboot to nubia emergency recovery it's return to Nubia logo boot loader and stuck.
i try every way to fix it but not success. Please advise me to fix this problem. It's make me panic now. :crying:
neomas said:
Hi all please help me to fix this problem.
I'm wipe all things and forget to backup.
When I restart my phone it's stuck at Nubia logo boot loader.
When I press volume - and power it's to fastboot mode but when i choose reboot to recovery mode or reboot to nubia emergency recovery it's return to Nubia logo boot loader and stuck.
i try every way to fix it but not success. Please advise me to fix this problem. It's make me panic now. :crying:
Click to expand...
Click to collapse
same here tried everything
odin 3.0
nubia emergency recovery
qfil
nubia recovery installation
i had flashed a chinese rom by navin
that perhaps flash away my recovery (i had installed twrp recovery)
thereafter to correct it i had used nubia emergency tool in bricked condition but that bricked my z9 mini
now we had the same problem we are able to get into fast boot loader
but it is of no use
it had various recovery modes but none of them worked
only anyone tell me if there is any way to connect my phone to my pc as it is not identifying it thats why am unable to make anything usable it.
Exact same issue here. If anybody knows a solution I would appreciate it.
me too
i flash recovery.img into kernel and deleted recovery stock its my fault
In my case, TWRP is installed (Nubia Z7 NX506J) but when starting into recovery only the Nubia logo shows up...the funy thing is:
I´AM in recovery-mode, coz the touchscreen vibrates when pushing the "hidden" buttons from TWRP. So it´s the Nubia-Logo which overlays the TWRP-mask. Has anyone an advise for this strange behavior ?
I Tried to navigate blind and with my Z9 Max in recov-mode laying beside the Z7, but it´s kinda effin hard to select the right directories..
essayn said:
In my case, TWRP is installed (Nubia Z7 NX506J) but when starting into recovery only the Nubia logo shows up...the funy thing is:
I´AM in recovery-mode, coz the touchscreen vibrates when pushing the "hidden" buttons from TWRP. So it´s the Nubia-Logo which overlays the TWRP-mask. Has anyone an advise for this strange behavior ?
I Tried to navigate blind and with my Z9 Max in recov-mode laying beside the Z7, but it´s kinda effin hard to select the right directories..
Click to expand...
Click to collapse
zakaria9 said:
me too
i flash recovery.img into kernel and deleted recovery stock its my fault
Click to expand...
Click to collapse
Thailer said:
Exact same issue here. If anybody knows a solution I would appreciate it.
Click to expand...
Click to collapse
Manmb.2010 said:
same here tried everything
odin 3.0
nubia emergency recovery
qfil
nubia recovery installation
i had flashed a chinese rom by navin
that perhaps flash away my recovery (i had installed twrp recovery)
thereafter to correct it i had used nubia emergency tool in bricked condition but that bricked my z9 mini
now we had the same problem we are able to get into fast boot loader
but it is of no use
it had various recovery modes but none of them worked
only anyone tell me if there is any way to connect my phone to my pc as it is not identifying it thats why am unable to make anything usable it.
Click to expand...
Click to collapse
neomas said:
Hi all please help me to fix this problem.
I'm wipe all things and forget to backup.
When I restart my phone it's stuck at Nubia logo boot loader.
When I press volume - and power it's to fastboot mode but when i choose reboot to recovery mode or reboot to nubia emergency recovery it's return to Nubia logo boot loader and stuck.
i try every way to fix it but not success. Please advise me to fix this problem. It's make me panic now. :crying:
Click to expand...
Click to collapse
I think all of you have a locked bootloader, can't flash TWRP with locked bootloader, it bricks devices with locked bootloader, that's what you all get when you try flashing a device without doing the PROPER research.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
I think all of you have a locked bootloader, can't flash TWRP with locked bootloader, it bricks devices with locked bootloader..
Click to expand...
Click to collapse
Hehe, nah, it´s all like it has to be. In my case I´ve found a solution. It´s written in the hidden text at this thread.
Have fun.
Unbrick your Nubia Z9 mini using "Nubia Toolstudio V 4.6.90."
Step 1: Connect your phone with Your Computer PC in "Qualcomm HS-USB QDLoader 9008" mode by pressing volume -,+ and power buttons, press all three buttons Simultaneously for 15 sec. (Note: Driver need for PC for connection, I used Nubia emergency tool 1.0.6 for driver purpose, don't use it for recovery purpose.)
ttps://drive.google.com/open?id=0B8joXHOIogfeOUVJanpnN1I0UjQ (Download All software From this given link, In this link "https"---"h" is missing, add by ur self)
Step 2: Install "Nubia Tool Studio V.4.6.90" in Your PC.
Step 3 : Open Nubia Tool Studio, Select model "NX511J" and "Firehouse Download" in menu list, click referesh button, it will shows connected port.
Step 4: Extract the firmware that you have downloaded, and shows the file path of Firmware folder. (Use any one Firmware file "Z9(Mini)_NX511J_XVV" or "Z9(Mini)_NX511J_XVV2".)
Step 5: Click "Start" button, it will start download to your phone's emmc. After completing download 100%, your phone automatically restart to normal, and you will be happy:laugh:
failed to complete 100% using Nubia Tool Studio
When i try to flash with Nubia Tool Studio it identified my mobile & when i do recovery it was failed @2 to 3% .
Kindly do help to recover
Didn't work
Umeshmahato said:
Step 1: Connect your phone with Your Computer PC in "Qualcomm HS-USB QDLoader 9008" mode by pressing volume -,+ and power buttons, press all three buttons Simultaneously for 15 sec. (Note: Driver need for PC for connection, I used Nubia emergency tool 1.0.6 for driver purpose, don't use it for recovery purpose.)
ttps://drive.google.com/open?id=0B8joXHOIogfeOUVJanpnN1I0UjQ (Download All software From this given link, In this link "https"---"h" is missing, add by ur self)
Step 2: Install "Nubia Tool Studio V.4.6.90" in Your PC.
Step 3 : Open Nubia Tool Studio, Select model "NX511J" and "Firehouse Download" in menu list, click referesh button, it will shows connected port.
Step 4: Extract the firmware that you have downloaded, and shows the file path of Firmware folder. (Use any one Firmware file "Z9(Mini)_NX511J_XVV" or "Z9(Mini)_NX511J_XVV2".)
Step 5: Click "Start" button, it will start download to your phone's emmc. After completing download 100%, your phone automatically restart to normal, and you will be happy:laugh:
Click to expand...
Click to collapse
I tried same, but after 2% it shows Download NON-HLOS.bin failed.
rajesh9250 said:
I tried same, but after 2% it shows Download NON-HLOS.bin failed.
Click to expand...
Click to collapse
Please try connect using ADB and try rebooting to recovery. If you can't try using the bootlaoder screen to flash recovery. Please do post some screenshots of your error.
Did not work
My phone model is Nubia Z9 mini and because of Encryption failed problem I wanted to Unbreak my phone.
When I try to uploaded you provided Firmware files "Z9(Mini)_NX511J_XVV" or "Z9(Mini)_NX511J_XVV2".) it will fail for some files. Below is log from Nubia Tool Studio V.4.6.90, please help me to resolve my problem :
19:48:44:312 [COM7] Starting...
19:48:46:637 [COM7] Start to download...
19:48:46:834 [COM7] Downloading prog_emmc_firehose_8936.mbn...
19:48:47:154 [COM7] Waiting for firehose mode...
19:48:50:405 [COM7] Start to download...
19:48:50:515 [COM7] Downloading NON-HLOS.bin...
19:48:54:750 [COM7] Downloading sbl1.mbn...
19:48:54:850 [COM7] Downloading sbl1.mbn...
19:48:54:983 [COM7] Download sbl1.mbn failed
19:54:16:083 [COM7] Starting...
19:54:16:113 [COM7] Can't find file[rawprogram0.xml]
20:00:19:972 [COM7] Starting...
20:00:20:501 [COM7] Start to download...
20:00:20:755 [COM7] Start to download...
20:00:21:114 [COM7] Downloading NON-HLOS.bin...
20:00:25:148 [COM7] Downloading DDR.img...
20:00:25:272 [COM7] Download DDR.img failed
20:07:37:347 [COM7] Starting...
20:07:37:619 [COM7] Start to download...
20:07:38:291 [COM7] Start to download...
20:07:38:455 [COM7] Download failed
20:09:54:605 [COM7] Starting...
20:09:54:852 [COM7] Start to download...
20:09:55:100 [COM7] Start to download...
20:09:55:224 [COM7] Downloading NON-HLOS.bin...
20:09:59:855 [COM7] Downloading sbl1.mbn...
20:09:59:976 [COM7] Downloading sbl1.mbn...
20:10:00:075 [COM7] Download sbl1.mbn failed
20:11:42:356 [COM7] Starting...
20:11:42:636 [COM7] Start to download...
20:11:42:920 [COM7] Start to download...
20:11:43:066 [COM7] Downloading NON-HLOS.bin...
20:11:46:648 [COM7] Downloading emmc_appsboot.mbn...
20:11:46:767 [COM7] Downloading emmc_appsboot.mbn...
20:11:46:850 [COM7] Download emmc_appsboot.mbn failed
20:12:37:336 [COM7] Starting...
20:12:37:589 [COM7] Start to download...
20:12:37:843 [COM7] Start to download...
20:12:37:947 [COM7] Downloading NON-HLOS.bin...
20:12:41:233 [COM7] Downloading rpm.mbn...
20:12:41:370 [COM7] Downloading rpm.mbn...
20:12:41:440 [COM7] Download rpm.mbn failed
20:13:19:589 [COM7] Starting...
20:13:19:870 [COM7] Start to download...
20:13:20:157 [COM7] Start to download...
20:13:20:317 [COM7] Downloading NON-HLOS.bin...
20:13:23:503 [COM7] Downloading tz.mbn...
20:13:23:711 [COM7] Downloading tz.mbn...
20:13:23:794 [COM7] Download tz.mbn failed
20:13:52:575 [COM7] Starting...
20:13:52:829 [COM7] Start to download...
20:13:53:084 [COM7] Start to download...
20:13:53:196 [COM7] Downloading NON-HLOS.bin...
20:13:56:798 [COM7] Downloading hyp.mbn...
20:13:56:920 [COM7] Downloading hyp.mbn...
20:13:57:011 [COM7] Download hyp.mbn failed
20:15:18:475 [COM7] Starting...
20:15:18:765 [COM7] Start to download...
20:15:19:053 [COM7] Start to download...
20:15:19:199 [COM7] Downloading NON-HLOS.bin...
20:15:22:778 [COM7] Downloading boot.img...
20:15:25:438 [COM7] Download boot.img failed
20:16:19:108 [COM7] Starting...
20:16:19:358 [COM7] Start to download...
20:16:19:613 [COM7] Start to download...
20:16:19:702 [COM7] Downloading NON-HLOS.bin...
20:16:22:825 [COM7] Downloading recovery.img...
20:16:25:387 [COM7] Download recovery.img failed
20:16:53:739 [COM7] Starting...
20:16:53:986 [COM7] Start to download...
20:16:54:238 [COM7] Start to download...
20:16:54:326 [COM7] Downloading NON-HLOS.bin...
20:16:58:287 [COM7] Downloading system.img...
20:19:17:050 [COM7] Download system.img failed
20:19:58:513 [COM7] Starting...
20:19:58:765 [COM7] Start to download...
20:19:59:058 [COM7] Start to download...
20:19:59:144 [COM7] Downloading NON-HLOS.bin...
20:20:03:521 [COM7] Downloading splash.img...
20:20:04:204 [COM7] Downloading gpt_main0.bin...
20:20:04:361 [COM7] Calculating gpt_main0.bin MD5...
20:20:04:428 [COM7] Reading gpt_main0.bin back...
20:20:05:507 [COM7] Calculating 94564872_gpt_main0.bin MD5...
20:20:05:579 [COM7] Re-download gpt_main0.bin...
20:20:05:659 [COM7] Reading gpt_main0.bin back...
20:20:06:713 [COM7] Calculating 94564872_gpt_main0.bin MD5...
20:20:06:777 [COM7] Re-download gpt_main0.bin...
20:20:06:916 [COM7] Reading gpt_main0.bin back...
20:20:07:968 [COM7] Calculating 94564872_gpt_main0.bin MD5...
20:20:08:030 [COM7] Re-download gpt_main0.bin...
20:20:08:152 [COM7] Verify gpt_main0.bin failed
20:20:46:749 [COM7] Starting...
20:20:46:997 [COM7] Start to download...
20:20:47:281 [COM7] Start to download...
20:20:47:413 [COM7] Downloading NON-HLOS.bin...
20:20:51:736 [COM7] Downloading splash.img...
20:20:52:266 [COM7] Downloading gpt_backup0.bin...
20:20:52:358 [COM7] Calculating gpt_backup0.bin MD5...
20:20:52:424 [COM7] Reading gpt_backup0.bin back...
20:20:53:478 [COM7] Calculating 94564872_gpt_backup0.bin MD5...
20:20:53:509 [COM7] Re-download gpt_backup0.bin...
20:20:53:616 [COM7] Reading gpt_backup0.bin back...
20:20:54:644 [COM7] Calculating 94564872_gpt_backup0.bin MD5...
20:20:54:674 [COM7] Re-download gpt_backup0.bin...
20:20:54:777 [COM7] Reading gpt_backup0.bin back...
20:20:55:803 [COM7] Calculating 94564872_gpt_backup0.bin MD5...
20:20:55:834 [COM7] Re-download gpt_backup0.bin...
20:20:55:880 [COM7] Verify gpt_backup0.bin failed
20:21:18:055 [COM7] Starting...
20:21:18:348 [COM7] Start to download...
20:21:18:603 [COM7] Start to download...
20:21:18:692 [COM7] Downloading NON-HLOS.bin...
20:21:22:166 [COM7] Downloading splash.img...
20:21:23:295 [COM7] Resetting...
20:21:23:363 COM7[USB1#1] disconnected
20:21:23:363 EXCEPTION_ACCESS_VIOLATION
20:21:23:674 [COM7] Download completed
any help? Same problem here!
GuyS100 said:
any help? Same problem here!
Click to expand...
Click to collapse
Hi, yes still I have this problem in my Nubia Z9 mini. It can not start and always stays in Nubia logo window.
It can start in Fastboot mode also, but for now it is useless.
Can you help me?
Related
Hello,
While flashing the SP-JAS computer freezed on 15% of completion and now the device is stuck in BOOTLOADER MODE, I'm not able to flash it normally, I even tried the SD Method, and it hangs on Checking...
Here's the RUU log file.
20:06:19:875 [msg] : Version : [5.10 - 20060412].
20:06:22:937 [msg] : Current Not in CE Mode or in CE Mode but ActiveSync Not Connected.
20:06:27:156 [msg] : Disconnect ActiveSync .... [2]
20:06:27:156 [msg] : Start Get Connect Port.
20:06:27:343 [msg] : Current in BL Mode. Open Port : [\\.\WCEUSBSH001] OK.
20:08:47:984 [err] : BL Get Device Data Error.
20:08:47:984 [msg] : START UnInitialization !
20:08:48:500 [msg] : END UnInitialization !
Here are also some results from the MTTY
USB>info 7
HTC Integrated Re-Flash Utility, Common Base Version : 1.50a
Device Name: B, Bootloader Version : 2.05
Built at: Jul 12 2006 15:32:49
Copyright (c) 1998-2006 High Tech Computer Corporation
CPU ID=0x41129200
Main CPLD version=0x8
Main Board version=0x4
USB>checkimage
IPL CRC checksum = 0x9352B5E9
SPL CRC checksum = 0x42F889A1
CE CRC checksum = 0x3197DD93
ExtROM is None.
Radio Image CRC checksum = <-- There's no result here and it freezes.
Help appreciated...
Not sure if it will help but have you tried using the latest HTC ROM update ? I had a similar problem on my Dopod and eventually got it back with latest HTC ROM update.
Well actually the latest HTC ROM was installed I wanted to revert back to the Imate rom, while the flashing procedure the computer freezed on 15%...
I'm not able to flash the device anymore, it's stuck in the bootloader....
Breeze has frozen after ROM flash
Please help me!
I have done upgrade MTeoR with rom RUU_BREE100_1.13.251.2_1.06.00.10_QtekEUR.
After the upgrade my qtec went shutdown and after this froze and have clear white screen.
I did try left+right soft key+power and selected restore to default factory, but the situation is same, phone don't working
I did try jog wheel+camera+power and ran upgrade, USB on PC detect phone as HTC device, but the ActiveSync don't find device and RUU program don't work and waiting to connect.
The Same problem!
I have the same problem! My PC freezed on 3% and now the device stuck in BOOTLOADER MODE! I tried to update after this, update fails! INVALID VENDOR ID I want to try SD METHOD, but i don't know where to find ROM in .nbf format Please Help...
i also have the same problem.. stuck in bootloader... even though i try installing the original rom it says invalid vender id.....
does nobody know what to do?
When you see "invalid vendor id" ignore this error and start ROMUpgradeUT.exe again without changing anything on your device.
Starting ROMUpgradeUT.exe two times often brings this to a solution.
HTH, MrPhoni
MrPhoni said:
When you see "invalid vendor id" ignore this error and start ROMUpgradeUT.exe again without changing anything on your device.
Starting ROMUpgradeUT.exe two times often brings this to a solution.
HTH, MrPhoni
Click to expand...
Click to collapse
didnt work for me....
Try to re-Flash with the same ROM currently installed or down/upgrade using the same vendor ROM.
eViL D: said:
Try to re-Flash with the same ROM currently installed or down/upgrade using the same vendor ROM.
Click to expand...
Click to collapse
didnt work for me..
Guys, i need a little help.
My phone just got dead. And i don't know what i need to do...
When i try the "AP Fastboot", i receive the message :
"Fastboot Reason : Flash Failure
fastboot : max download size : 100mb
USB connected"
So, when i try to flash with RSD, the phone show's this message :
"Getvar max-download-size
Downloading...
not found partition cdt.bin
E: No partition cdt.bin existing
Fastboot command failed."
__
I don't know what to do. And i didn't try to unlock or something like this. This is my father's phone, he was playing and, in a second, the phone go off and never wake up again.
Can anyone help-me plase?
Thanks!
Toncovitch said:
Guys, i need a little help.
My phone just got dead. And i don't know what i need to do...
When i try the "AP Fastboot", i receive the message :
"Fastboot Reason : Flash Failure
fastboot : max download size : 100mb
USB connected"
So, when i try to flash with RSD, the phone show's this message :
"Getvar max-download-size
Downloading...
not found partition cdt.bin
E: No partition cdt.bin existing
Fastboot command failed."
__
I don't know what to do. And i didn't try to unlock or something like this. This is my father's phone, he was playing and, in a second, the phone go off and never wake up again.
Can anyone help-me plase?
Thanks!
Click to expand...
Click to collapse
Are you sure u use the right firmware, as HSD-Pilot explains here the cdt.bin partition doesn't exist on the Razr I. So it seems u are trying to flash the wrong firmware.
If this is it, maybe try searching before asking But nevermind now, i hope this helps resolve your issue
It seems i can't flash with Phone Flash tool at the Moment.Till yesterday, it was working all fine.
Now,it is so - i start Phone Flash Tool, choose .json file to flash (say- Mirek ROM), the plug in my device
and press flash, i get an error message, saying that flash is not possible and something about
"device can not reboot" or something... (Device is in dnx mode, i see that in display in small font).
What is here wrong?How i can solve it,please?
Thanks all in advance!!!
Stuck on Fastboot mode when I try to flash recovery it keeps responding with failed flash write failure
I flashed the 2.5 ROM over the 1.9 due to a lack of OTA ("no new updates found"), only to find my phone stuck with this message:
"Your Device is Corrupt. It can't be trusted and will not boot.
Visit this link on another device: g.co/ABHg.co/placeholder"
Visited link: 404.
Phone's stuck in bootloop; keeps rebooting to that message.
I managed to get the phone to stay in 9008 mode, but I keep getting Sahara errors on QFIL, no matter how many times or how fast I press 'download content'. Changing USB ports doesn't help, either. It's not looking good! Right now, my Z2Pro is the most expensive brick I've ever bought!
"Your Device is Corrupt. It can't be trusted and will not boot.
Visit this link on another device:
1 link is work g.co/ABH
2 link is 404 g.co/placeholder"
You need firmware update.
Flashing
Try to do the flashing process in windows 7 via QFIL...other os's might have some problem...try Win 7...you would never get Q Sahara Error...either stop that QPST server on settings... hope it'll work