Database Develop

[ROM] CyanogenMod 13.0 | Android 6.0.1 Marshmallow | [12/27/2015]+Nightlies

UPDATE 12/30: I set up my buildbox to build nightly builds of all devices. Although the klte builds will be identical to the CM nightlies so this is really just for those who have a variant that has not yet been enabled for nightlies on CMs build server. As with any nightly these are UNTESTED and USE AT YOUR OWN RISK. DO NOT REPORT BUGS FROM A NIGHTLY. I can't stress this enough. As you can see, in the 2nd post I changed the "Latest Release" text to "Latest TESTED Release" so if you aren't on that build. Please don't report a bug.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DO NOT REPORT BUGS UNLESS YOU HAVE DONE A FULL WIPE, INSTALLED THE GAPPS PROVIDED IN THE 2ND POST, AND ARE RUNNING STOCK KERNEL WITHOUT STUPID MODS OR YOUR BUG REPORT WILL BE IGNORED PERIOD.
These are UNOFFICIAL/DEVELOPER builds based of CM-13.0 for klte (GSM) and CDMA variants and by NO means this is my ROM. 100% credits goes to TeamDouche, and all other coders who contributed to CyanogenMod.
Supported devices, should work with all klte variants that are qualcomm
Included in the Unified GSM build
kltexx, kltelra, kltetmo, kltecan, klteub, klteacg, kltedcm, klte
Individual CDMA builds kltespr, klteusc
Individual GSM builds kltedv
If your device isn't listed in the "individual" lists then flash the generic "klte" build
Click to expand...
Click to collapse
Code:
[B]IMPORTANT[/B]
* Do NOT expect daily builds. I'll build when I'm free.
* Do NOT ask for support for flashing in this thread.
* Do NOT use this unofficial build and ask for support at the official threads.
* Do NOT be rude.
* Respect all users
* If I see a NOOB question and I don't feel like replying, I WONT.
Built from CM source
Service
Text
Data
Call
Audio
WiFi
Google Now
Bluetooth
GPS
MMS
Video playback
Audio playback
Internal SDcard mounting
External SDcard mounting
Camera
Video recording
IR Blaster
NFC
Some CM features still have not been added yet be patient if your feature isn't there
You tell me
Do NOT use superwipes
DO NOT dirty flash (or if you do, DON"T REPORT BUGS UNTIL YOU DO)
Wipe data, cache, and dalvik cache
*** ((but do not report bugs if you didn't full wipe))
Flash ROM
Flash GAPPS (in 2nd post) (No other gapps packages are officially supported!)
Reboot
???
Profit
To enable Developer Options go to Settings, About Phone and repeatedly press Build Number.
If you use ADB read this: PSA by CM
If you use reboot to recovery read this: PSA by CM
Regarding new Superuser: PSA by CM
And any and all users in this thread who contirbuted or will contribute to making this ROM as stable as possible
Esa Laukkanen aka elelinux
Cyanogen Inc & Team-Kang
Garwynn XDA
MrTrip
Thescorpion420
DevVorteX
albinoman887
ktoonsez
so here is a donation link if you want to buy me a coffee or pack of smokes (I go through a lot sitting on the PC messing around lol) go ahead. But not required or expected by any means
Note: The name on the Paypal account may say Patricia, this is because it's a family Paypal account.
Thanks and happy flashing!
DOWNLOAD LINK + CHANGELOG in 2nd post
XDA:DevDB Information
[ROM] CyanogenMod 13.0 | Android 6.0.1 Marshmallow+Nightlys, ROM for the Samsung Galaxy S 5
Contributors
albinoman887, DevorteX
Source Code: https://github.com/Team-Hydra
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2015-10-31
Last Updated 2015-12-30

Dec 30
* set up my buildbox to do a nightly build (well early morning) for all devices but it is mainly for the devices that i work on that are not built by CM yet. so as of this writing that would be kltedv,klteusc and kltespr. If you aren't an owner of one of these devices the klte build is identical to CM's so really no reason to use it. but feel free if you like as it is in the list for builds to be done...
Dec 27
* Enabled SELinux Enforcing
* Fixed offmode charging with SELinux enabled
* Misc cleanup and updates
* Upstream updates
** NOTICE: CM will be enabling nightlies starting tomorrow for the "klte" variant. so far that is the ONLY ONE that is being enabled. So this release will be my last release with a "klte" build download. there is no reason to have two identical builds floating around. It will just confuse people. I will continue to build for kltespr,klteusc, and kltedv until they are enabled on CM. and you can still use this thread to report bugs as nothing is changing regarding whos developing and with what. just where the builds are downloaded from. If a bug ends up popping up down the road this thread would be the place to check for a fix before it gets merged to CM (sometimes they take a long time). Anyways enjoy. and as always the other variants are compiling now.
Dec 21
* Fixed up newly required permissions for sensors and got everything working correctly with lollipop libs. No hacked driver in kernel to get old sensor HAL to load, nothing. 100% LP sources now (how Ethan intended). Battery life should be improved as well as other things
* Any and all changes from time of compile
* As always klte is released first. the rest are compiling now
Dec 18
* Switched back to KK/cm-12.1 libs and kernel (what we have been using up until the 12/10 build) to fix all the issues people are having
* Any upstream updates at time of compile
** As always klte out first. the rest are compiling as I type
Dec 17
** Sorry for the delay there were some issues with the hardware in the buildbox not playing nice... all fixed now **
* All the crap from the last release hopefully should be over now
* Fixed the rotation and black screen in call(etc) issue
* IR Blaster works again. Tested with Peel IR Remote and a LG TV
* I removed the stuff in ramdisk for adaptive lmk because i'm pretty sure that we need kernel support and it most likely is a no-op but could be bad having it in
* Removed call recording overlay because i cannot find the setting for it so unless someone tells me I removed a feature i think the overlay is a no-op as well
* kltedv and klteusc are back now. They were excluded from the last build because of the lib update and i completely spaced that those devices needed libs and then got pre-occupied with the sever issues and my F'n ISP being stupid both at the same time . anyways hope this sorts things out...As always (you should know the drill) klte first, rest are compiling as I type
Dec 10
* Fixed BT Force close issue
* Fixed the issue with the lollipop libs and kernel and compass. We now have full Lollipop kernel and vendor libs with working compass
* Any other changes at time of compile
Dec 9
* Android 6.0.1
* You can now disable home button wake (Devortex)
* Unpinning is fixed (Devortex)
* Lots of other CM updates
* Pretty much any fix Devortex has posted since the last build I released is included in this. I can't remember off the top of my head what else changed but thats the gist.
* got a new domain. all downloads are at team-hydra.org (its the same site i've been using except now you dont have to remember the IP)
** As always klte first, the rest are compiling...
Dec 3
** Better late then never. Sorry. all the parts for the buildbox should be here by the weeks end and then this shouldnt be an issue anymore **
* Fixed incoming calls on CDMA devices (kltespr,klteusc)
* Fixed missing APN menu on CDMA devices (kltespr,klteusc)
* Fixed artifacts in camera preview image (that was a screw up on my part)
* Fixed that stupid "Your SIM card roaming capabilities have been updated" when the other caller hangs up
* Fixed GPS staying on when CM Camera app is suspended in background
* Any and all CM updates at time of compile
*** As always klte first, then the rest as they compile and upload **
Nov 29
** GOT A FRIEND TO LET ME USE HIS SYSTEM FOR THE NIGHT SO ENJOY! **
* kltespr build fixed (really dont know what happened there must have been a network error)
* Re-Enabled adaptive LMK (got disabled during the rebase)
* Disabled qcom's mm-parser which is being done all over CM for msm8974 which was the actual cause of the video recording lag...
* Any and all CM updates at time of compile
* As always klte build is out at the time of this post the rest take a couple hours to compile. Enjoy
*** PSA: i'm at $125 or so for my server. Thank you guys so much. I have two options. One is a Ebay auction that ends in a couple days which is an amazing machine and one i can buy from a friend any time in the next two weeks. So thanks. I'm getting close
Nov 27
* OK after being gone for a week due to a storm and coming back to another storm of changes that broke s*** here is a new build for you guys. Should be no regressions, just new features
* As always klte build is out at the time of this post the rest take a couple hours to compile. Enjoy
Nov 11
** Veterans, Thank you for your service **
* infinite bootloop when enabling power saving mode is fixed, thats pretty much it
* initial KLTEUSC build (once its done, i always release the klte build as soon as its done compiling and then the rest i just leave the system going and let it finish them as time permits)
Nov 10
* Now on tap works, Make sure its enabled in Google Settings
* Fixed Auto timezone bug
* Formatting external SD as internal storage now works correctly
* Updated media_codecs.xml for marshmallow
* Fixed A/V sync issues with recorded videos
* Re-Enabled Doze
* Hardware backed encryption seems to work now (this never worked on cm-12 or 12.1)
* Defined the "radio access family" for the different variants so hopefully the APN issues kltespr users were having are fixed
* Bunch of CM updates
* New build of kltedv that i'm hoping will boot
* Updated Gapps link also added a 2nd one and will add more if required.. let me know what one works for you because i don't seem to have any of these problem but the klte is not my DD
** NOTE: It takes about an hr and a half per variant build to complete. I set a cron job script that is currently building the other variants (kltespr,kltedv, and eventually klteusc) but I don't have the time to wait for all of those. People using other then the klte builds just keep checking the build archive for your variant every hour or so until you see the 11/10 version. **
Nov 6
* Fixed Video Recording
* Partially fixed external sdcard mounting (you can mount as portable but if you format as internal you get a bootloop with that sd inserted at boot and it requires a format for it to work again)
* Enabled Call Recording (although i think its a major breach of peoples privacy)
* CM merged android 6.0_r26
* lots of CM updates
* lots of display hal updates (upstream)
* initial release of kltespr
* initial release of kltedv
* Updated Gapps link to a more stable version
** klteusc will happen tomorrow if no crazy bugs pop up in this release **
Oct 31
DO NOT dirty flash over CM-12.1
* initial build of cm-13.0/Android 6.0. THERE WILL BE BUGS so think before you post dumb stuff
* com.android.phone FCs on first boot but after that its fine
* Not all CM features are added yet
* Right now its just klte but i will be rolling out the other variants over the next 24 hrs or so so just check check back every few hours for your build.
Team Hydra Github (main): https://github.com/Team-Hydra
CyanogenMod Github: https://github.com/CyanogenMod
For Untested NIGHTLY Builds please check the 3rd post
Due to resource limitations builds are released in a staggered fashion. If you find the newest build not available for your device it most likely means its compiling. Simply check back in 30-60 mins and it should be there
Latest TESTED Release: cm-13.0-20151227
G900I (kltedv) : Browse KLTEDV Build Archive
G900P (kltespr) : Browse KLTESPR Build Archive
G900R4 (klteusc) : Browse KLTEUSC Build Archive
G900V (kltevzw) : Browse KLTEVZW Build Archive
If your specific model isn't listed above and is a CDMA device it is not supported. Otherwise flash the unified GSM build below....
G900* Unified-GSM : cm-13.0-20151227-UNOFFICIAL-klte.zip | Browse KLTE Build Archive
----------------------------------------------------------------------------------------------------------------
GAPPS: : Slim_mini_gapps.BETA.6.0.build.0.x-20151106.zip
GAPPS #2 : gapps-600-base-20151104-1-signed.zip

Nightly Builds
As with any nightly, these come with absolutely no support. DO NOT post any bugs or make any whisper of an issue if you are using these builds. Only builds in the 2nd post are guaranteed to work.
G900* Unified GSM (klte) : Browse KLTE Nightly Builds (Official CM) | OR | Browse KLTE Nightly Builds [3rd Party)
G900I (kltedv) : Browse KLTEDV Nightly Builds
G900P (kltespr) : Browse KLTESPR Nightly Builds
G900R4 (klteusc) : Browse KLTEUSC Nightly Builds
---------------------------------------------------------------------
Info on the build box you guys bought me
Hardware Specs
Configuration:
Ubuntu 15.10 x64
OC'd to 4.2Ghtz
2 SSDs in RAID 0 as rootdir and the conventional for stroage

Thanks you guys a lot for the devolpment you made on the Galaxy S5

enjoy

do you think that the fingerprint will work on aosp marshmallow

Wow, thanks so much albinoman! Can't wait till i get home and test this out

sh4dow6oy said:
do you think that the fingerprint will work on aosp marshmallow
Click to expand...
Click to collapse
no, I don't think

if only i could disable backlight buttons

@albinoman887 yeah Buddy great stuff works really great for initial build!
Gesendet von meinem SM-G900F mit Tapatalk

sh4dow6oy said:
if only i could disable backlight buttons
Click to expand...
Click to collapse
you can... go to Settings>Buttons>Backlight

2 questions.
1. Does this work on g900t?
2. Do I need to have the latest modem and bootloader for this to work?

albinoman887 said:
you can... go to Settings>Buttons>Backlight
Click to expand...
Click to collapse
doesnt work ...maybe in the next build

Works fine on the SM-G900I version.
Only annoying thing is the red triangle that appears when unlocking device and at various other times.
IGNORE. I was on an old CM 13 build. I have reflashed and there's no red triangle.

Just curious - could anyone who installed this check if option to unify SD card with internal storage is available and works?

Plz make one for g900h

revanmj said:
Just curious - could anyone who installed this check if option to unify SD card with internal storage is available and works?
Click to expand...
Click to collapse
I don't see an option, sorry. Only lets me 'format as portable storage', not 'Format as internal storage'

Congrats on getting this out so quick
Glad to be a part of this community, working great for now on my SM-G900I (ktledv) will be hanging out for this build though too

AWESOME :') love you guys

daddymemoru said:
2 questions.
1. Does this work on g900t?
2. Do I need to have the latest modem and bootloader for this to work?
Click to expand...
Click to collapse
Yes, it should. And I think you should just update to the T-Mobile OG6 firmware for good measure.

[ROM][7.x][T810] LineageOS 14.1 for Tab S2 9.7 wifi

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This ROM is Beta and not ready for daily use at the moment​
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community
First I would like to thank the following developers :
@RaymanFX
@CTXz
I used @RaymanFX's T815 image to base my cm 13.0 build on, which in turn is the base of cm-14.1 and this lineage-14.1.
Before you start
THIS ROM IS ONLY FOR THE SM-T810
Code:
*
* Your warranty will be voided !
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
About the ROM
Current state of ROM : testing
Everything except what's reported below is working (or not yet reported as not working).
What is Fixed
In '20-09' build reboot to recovery triggers message 'Factory reset'. (wrong messagem not resetting)
Camera not working in selinux enforcing
Front facing camera unable to save image
Hardware codecs not working (fallback to software for mp3/flac works)
Limited wifi 5GHz support (channels above 100 give issues)
Video recording not working? (not tested on T810, reported not working on T815)
Mic not working (no input routing)
SDCard working again (broke after switch N blobs)
What is not working
Important
Bluetooth not working (broke with switch to N blobs, works on images before 23-04)
Fingerprint scanner not working
Minor
Bootanimation died with introduction Lineage animation
Instructions
How to install LineageOS 14.1
If you haven't run stock Android 6.x, flash that first with odin. (image won't boot without this step)
If you don't have TWRP yet, get it from here : TWRP by ashyx
Download the ROM and the Gapps that are located below to your device
Reboot into TWRP by holding VOL UP + POWER + HOME on boot
In case things go wrong make a backup
After the backup has completed return to home and select Wipe and then Advanced Wipe
Now ONLY tick Dalvik Cache, System, Data and Cache
After ticking those, Swipe below to wipe
Once the wipe has completed return to home and select the ROM
After you selected the ROM swipe below to install it
After the ROM has installed flash the Gapps
When all of this is done, reboot into system, wait, and enjoy LineageOS 14.1
How to ROOT
As build-date 20-01-2017, root is by default not available. Install the correct root package from here. Install the arm root package after lineage. Then follow the steps below.
In LineageOS 14.1 Enable the developer options
Select Root access
Select Apps Only
Done
Questions and bug reporting
The following questions will be ignored
Inappropriate questions
Forced orders, EX. : "PLS FIX!!!!!!"
ETA's
Often repeated questions usually by the same user
Requests that are out of LineageOS's framework (Ex. Adding Samsung Apps)
How to report a bug/issue
Explain exactly what happens
Mention a log if you can (Please use hastebin or any other paste site to keep the thread clean)
If you can't mention a log, explain as precise as possible when, why and where it occurs!
Changelog
Code:
**********
14-05-2017 - Build SDCard fix, SD card wordk again. (BT still broken)
**********
24-04-2017 - Build with Nougat T815 (common) and T810 (device specific) blobs.
**********
23-04-2017 - Build with Nougat blobs.
- Broke external SDCard, BT
**********
16-04-2017 - Latest patches, including neat netflix patch.
**********
03-04-2017 - Netflix patch in self compiled build.
**********
12-03-2017 - Updated links here, uploaded build of yesterday (Patch level March).
**********
26-02-2017 - Build went Nightly (more Weekly).
**********
24-02-2017 - Removed rild correctly.
**********
17-02-2017 - Removed rild, not needed.
- Final test build before nightly.
**********
10-02-2017 - Several DRM fixes in common part. (Could fix netflix, can't test)
- Fingerprint services available (untested)
- Tablet encryption available (untested)
**********
29-01-2017 - Recompile with latest patches and manual update of bootanimation.
- Fixed compilation of bootanimation (latest build has one self-compiled)
**********
28-01-2017 - Mic fixed
**********
26-01-2017 - LineageOS new style, WITH_SU (builds after today will be without)
- No bootanimation. (so be patient, it'll boot)
**********
05-01-2017 - Latest patches and final rebrand.
**********
02-01-2017 - Sources patched so self-compiled dtb is used, so image boots... :D
- Latest gts2-common patches added.
- Product name rebranded to lineage.
**********
01-01-2017 - Complete image build with self-compiled dtb.
**********
29-12-2016 - First LineageOS recompile after rebrand is (mostly) finished.
- Latest patches.
**********
Downloads
All LineageOS 14.1 Nightly releases can be found here : https://download.lineageos.org/gts210wifi
Latest self compiled LineageOS 14.1 build : https://www.androidfilehost.com/?fid=529152257862726418
All self compiled LineageOS 14.1 releases can be found here : https://www.androidfilehost.com/?w=files&flid=138958
Recommended GAPPS by opengapps.org : http://opengapps.org/ (I use pico)
Source
Special Thanks to @RaymanFX for releasing his Exynos 5433 source, and already patching the common sources to lineage-14.1, without him this ROM would most likely not be possible!
All my sources can be found at github LineageOS -> gts2*
Screenshots
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
XDA:DevDB Information
LineageOS 14.1 for Tab S2 9.7 wifi, ROM for the Samsung Galaxy Tab S2
Contributors
T_I, RaymanFX, CTXz
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock Android 6.x flashed at least once before install
Based On: LineageOS
Version Information
Status: Nightly
Created 2016-12-29
Last Updated 2017-05-15

You. Are. The. Man!
Sent from my ONEPLUS A3003 using Tapatalk

Wow that was fast
Running awesome BTW... Thanks!
Sent from my SM-T810 using Tapatalk

tzlot said:
Wow that was fast
Running awesome BTW... Thanks!
Click to expand...
Click to collapse
Could have posted a day sooner, but was messing with the dtb compile (@RaymanFX got it working, currently compiling to test).
I hope the solution workd for all Tab s2's with the exynos chipset. I think the T71x tabs have issues with the stock dtb/kernel combination. Would be nice to get those builds up and running again.

Might flash this tomorrow. Anyone try Netflix on it yet ?

Awesome stuff. Will give this a flash here in a bit after I do a Odin. Just for my infos :angel: Does this have similar tweaks to CM 14.1 did or still pretty barebones at this date. Either way it won't stop me from trying it, just curious.

maddog975 said:
Might flash this tomorrow. Anyone try Netflix on it yet ?
Click to expand...
Click to collapse
DroidIt! said:
Awesome stuff. Will give this a flash here in a bit after I do a Odin. Just for my infos :angel: Does this have similar tweaks to CM 14.1 did or still pretty barebones at this date. Either way it won't stop me from trying it, just curious.
Click to expand...
Click to collapse
It's a rebranded cm-14.1, so expect all issues cm-14.1 had to be acailable in this build as well, until we fixed them.
Just replaced the boot.img from a failed build of yesterday with a new one with a self compiled dtb made today. The change to build the dtb killed something else, so I need to hunt that new bug down. Will update OP with link to new file when the upload finishes.

T_I said:
It's a rebranded cm-14.1, so expect all issues cm-14.1 had to be acailable in this build as well, until we fixed them.
Just replaced the boot.img from a failed build of yesterday with a new one with a self compiled dtb made today. The change to build the dtb killed something else, so I need to hunt that new bug down. Will update OP with link to new file when the upload finishes.
Click to expand...
Click to collapse
Sounds cool...and thanks a ton for all the work you're doing on this...and Happy New Year!

maddog975 said:
Might flash this tomorrow. Anyone try Netflix on it yet ?
Click to expand...
Click to collapse
Netflix will cast fine if you have a chromecast but doesn't work locally yet. The video zoom issue is much improved - YouTube works great, prime video works, Facebook video works but still a bit buggy (videos sometimes play at half speed, sometimes need reloading to work fullscreen).
Sent from my SM-T810 using Tapatalk

NalNalas said:
You're the best! I'll totally donate to you when I get the chance.
Click to expand...
Click to collapse
Just did exactly that yesterday . Work like this needs tangible support.
Sent from my ONEPLUS A3003 using Tapatalk

Thanks for the support.
Just compiled a complete image with the new boot.img generation (incl. compiled dtb instead of stock). Updated OP. Image not yet tested, flashing as I type..

T_I said:
Thanks for the support.
Just compiled a complete image with the new boot.img generation (incl. compiled dtb instead of stock). Updated OP. Image not yet tested, flashing as I type..
Click to expand...
Click to collapse
Mine is stuck on the boot screen.
Edit: I flashed the boot.img file from the 12/31 build with Odin and the 01/01 build booted fine.

Check, stuck on my tab s2 as well. Will build a new image tomorrow.
Sent from my SM-T810 running lineage-14.1

Build 01/02 boots just fine

Did a recompile, added latest patches of @RaymanFX on the gts2-common tree and rebranded the product name to lineage. (missed that one) Updated op with link. (and tested, it boots )
Feels a tad faster on the screen as well.

Sounds great that something is happening for the Tab S2 However i have a T815 (LTE model), any chance it will be supported somewhere down the line? (with or without LTE support, as i rarely use it)

Epedemic said:
Sounds great that something is happening for the Tab S2 However i have a T815 (LTE model), any chance it will be supported somewhere down the line? (with or without LTE support, as i rarely use it)
Click to expand...
Click to collapse
@RaymanFX is building the T815 sources and to be honest, doing most of the work. I mostly check of his patches don't break the T810 build. I don't know where he uploads his images.
Speaking of which, when he was debugging the T815 to locate the missing hardware decode support, he found, after a clean install, that they were used. I've compiled today and I'm now rebuilding my device, to see if graphincs have improved. When someone with netflix could test if it works after a clean flash, that would be nice.
OP updated with link to todays build.

Did a factory reset, fresh install - Netflix still can't play.
01-05 19:37:02.502 E/BufferQueueProducer(2616): [SurfaceView - com.netflix.mediaclient/com.netflix.mediaclient.ui.player.PlayerActivity] cancelBuffer: BufferQueue has no connected producer
Thanks for the efforts anyway.

Drat, still no-go...
Sent from my SM-T810 running lineage-14.1

NalNalas said:
Youtube is having a problem where when you set the video to 1080p, after a minute or so the video zooms in awkwardly. It can be easily replicated.
Click to expand...
Click to collapse
This is a very well-known bug, affecting all AOSP-based 7.1.1 ROMs. The problem has to do with auto quality detection. If YouTube, and pretty much all web-based video, allowed for the resolution to be manually and statically set, this wouldn't be a problem.

[ROM][7.x][T715][ABANDONED] LineageOS 14.1 for Tab S2 8.0 2015

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As of 30-01-2017 the sources have been included in LineageOS, created new thread https://forum.xda-developers.com/tab-s2/orig-development/rom-lineageos-14-1-tab-s2-8-0-2015-t3551027 as the project is now original LineageOS.
This ROM is BETA and not ready for daily use at the moment​
Marked as BETA/EXPERIMENTAL, as all uploaded images after 7-2-2017 are untested by compiler, as I don't own the device. (have one on loan for a few weeks) (Donations to fix this are welcome :fingers-crossed: :laugh: )
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community
First I would like to thank the following developers :
@RaymanFX
@CTXz
@Sarum4n
I used @CTXz his T710 work and @RaymanFX's T815 image to base this cm 13.0 build on.
Special thanks to @Sarum4n, as he loaned me the T710 to test the builds and debug the boot issue we had. All except lte functionality i stested. (as the T710 doesn't have lte)
Before you start
THIS ROM IS ONLY FOR THE SM-T715 AND MOSTLY UNTESTED BY DEVELOPER
Code:
*
* Your warranty will be voided !
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
About the ROM
Current state of ROM : BETA/EXPERIMENTAL
Everything except what's reported below is working. Nothing 'fixed' yet, first build.
What is Fixed
Bootanimation not working
Mic not wirking
What is not working
Important
Fingerprint scanner not working (included, but not working)
Camera not working (killed it with kernel update )
Vibration not working (probably also kernel)
Minor
Instructions
How to install Lineage 14.1
If you haven't run stock Android 6.x, flash that first with odin. (image won't boot without this step)
If you don't have TWRP yet, get it from here : TWRP by ashyx
Download the ROM and the Gapps that are located below to your device
Reboot into TWRP by holding VOL UP + POWER + HOME on boot
In case things go wrong make a backup
After the backup has completed return to home and select Wipe and then Advanced Wipe
Now ONLY tick Dalvik Cache, System, Data and Cache
After ticking those, Swipe below to wipe
Once the wipe has completed return to home and select the ROM
After you selected the ROM swipe below to install it
After the ROM has installed flash the Gapps
When all of this is done, reboot into system, wait, and enjoy Lineage 14.1
How to recover from issues
Looks like the reset to recovery (<HOME><VOL-UP><POWER>) is still broken on some or all T710/5 & 810/5 devices with this build.
Press and hold <HOME><VOL-DOWN><POWER> to enter 'download' screen.
Select cancel <VOL-DOWN>
Immediately press and hold <HOME><VOL-UP><POWER> to enter TWRP
Restore back-up made during installation phase
How to ROOT
Install the correct root package from here. (after flash of the image)
In LineageOS 14.1 Enable the developer options
Select Root access
Select Apps Only
Done
Questions and bug reporting
The following questions will be ignored
Inappropriate questions
Forced orders, EX. : "PLS FIX!!!!!!"
ETA's
Often repeated questions usually by the same user
Requests that are out of LineageOS's framework (Ex. Adding Samsung Apps)
How to report a bug/issue
Explain exactly what happens
Mention a log if you can (Please use hastebin or any other paste site to keep the thread clean)
If you can't mention a log, explain as precise as possible when, why and where it occurs!
Changelog
Code:
**********
29/01/2017 - First build LineageOS 14.1.
- Fixed mic
**********
Downloads
Latest LineageOS 14.1 build : https://www.androidfilehost.com/?fid=457095661767133753
All LineageOS 14.1 BETA releases can be found here : https://www.androidfilehost.com/?w=files&flid=141202
Recommended GAPPS by opengapps.org : http://opengapps.org/ (I use pico)
Source
Special Thanks to @RaymanFX for releasing his Exynos 5433 source, without him this ROM would most likely not be possible!
All our sources can be found here : https://github.com/Galaxy-Tab-S2/android_device_samsung_gts28wifi
Screenshots
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
XDA:DevDB Information
LineageOS 14.1 for Samsung Galaxy Tab S2 8.0 T715, ROM for the Samsung Galaxy Tab S2
Contributors
T_I,CTXz, Sub77, Moonbutt74, RaymanFX, Hennymcc
Source Code: https://github.com/Galaxy-Tab-S2
ROM OS Version: 7.x Nougat
Based On: LineageOS
Version Information
Status: BETA
Created 2017-01-30
Last Updated 2017-01-30
XDA:DevDB Information
LineageOS 14.1 for Tab S2 8.0 2015, ROM for the Samsung Galaxy Tab S2
Contributors
T_I, RaymanFX, CTXz
Source Code: https://github.com/Galaxy-Tab-S2
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock Android 6.x flashed at least once before install
Based On: LineageOS
Version Information
Status: Abandoned
Created 2017-01-30
Last Updated 2017-02-11

Jumped the gun a bit, as it's compiling now. The issues are overcome and the build should work. (Want to have it online as soon as it's upoloaded) All info in OP is correct, except the latest build link. (need to upload that first )

Thank you! Will test this.
Quick question. Is LTE module working? And which gapps shoud i install, arm or arm64?

Uploaded build and updated link in OP.
PaterProx said:
Thank you! Will test this.
Quick question. Is LTE module working? And which gapps shoud i install, arm or arm64?
Click to expand...
Click to collapse
Don't know if lte is working, don't have a T715, just a sleep-over T710. I'm now repacking and flasing so I can test it there.
The device is arm, so you need arm gapps ans root package. I test with opengapps pico.

T_I said:
Uploaded build and updated link in OP.
Don't know if lte is working, don't have a T715, just a sleep-over T710. I'm now repacking and flasing so I can test it there.
The device is arm, so you need arm gapps ans root package. I test with opengapps pico.
Click to expand...
Click to collapse
Okay, im downloading. Will give you a report. What do you mean with root package?

PaterProx said:
Okay, im downloading. Will give you a report. What do you mean with root package?
Click to expand...
Click to collapse
See OP -> How to root. Things changed in Lineage, root isn't available by default anymore.
Tested image on T710 and it boots. Screenshot added to OP.
Camera isn't working. As it did in cm-13 build for T715, I can check what I killed.

Okay, installed it and it boots. WLAN works, LTE also works but not on first boot. Only thing I noticed is that vibration is not working and camara also. But all in all its very smooth. Will give this a week and report again.

PaterProx said:
Okay, installed it and it boots. WLAN works, LTE also works but not on first boot. Only thing I noticed is that vibration is not working and camara also. But all in all its very smooth. Will give this a week and report again.
Click to expand...
Click to collapse
I killed the camera in the process of getting screen back up. (Kernel config) When I remember correctly, vibration is also a kernel option. Will look into this and post a build when I get a solution.

Installed and works!
Just installed the ROM. I can confirm, that everything is working as described above, perfect! Thanks for the great work, i will continue testing and try to support as far as i can.
One first, little thing i just found by chance:
When opening settings app, the last menu entry 'About Tablet' shows 'SM-T815' under 'Device Model'.
Not a big deal, just wanted to report.
Thanks again, i appreciate the work done by you all!

Thanks for the Rom :good:
Since I own the T715 I am waiting for this.
Will give it a try during the weekend

The T710/T715 sources have been included in LineageOS github on 30-01-2017, so I'll be moving the thread over to the official development section. (or be more precise, create a new one there)

Hi,
Have Problems with YouTube (Videos Looks after ~30sec in Zoom) and Facebook Videos are Not starting.
(On a T715)

Please report the issues to the correct thread, as this one is abandoned. (we moved to original development) (And fixes to bideo playback are made and upodated images will be posted there )

T_I said:
Please report the issues to the correct thread, as this one is abandoned. (we moved to original development) (And fixes to bideo playback are made and upodated images will be posted there )
Click to expand...
Click to collapse
Closed - in future, please request that the thread be closed and also ADD REDIRECTION to your final thread post to enable others to find things...
https://forum.xda-developers.com/tab-s2/orig-development/rom-lineageos-14-1-tab-s2-8-0-2015-t3551027

[ROM][7.x][T715][UNOFFICIAL] LineageOS 14.1 for Tab S2 8.0 2015

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This ROM is BETA and not ready for daily use at the moment​
As of 8-7-2017 permanently marked as BETA.
The project started out as Experimental, as I had no device. Thanks to @Sarum4n it was temporarely BETA since 27-1-2017 as he loaned me his T710. Thanks to donations a used T710 came into budget and is available to test code.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community
First I would like to thank the following developers :
@RaymanFX
@CTXz
@Sarum4n
I used @CTXz his T710 work and @RaymanFX's T815 image to base this lineage 14.1 build on.
Special thanks to @Sarum4n, as he loaned me the T710 to test the builds and debug the boot issue we had. All except lte functionality is tested, as the T710 doesn't have lte.
Before you start
THIS ROM IS ONLY FOR THE SM-T715
Code:
*
* Your warranty will be voided !
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
About the ROM
Current state of ROM : BETA/EXPERIMENTAL
Everything except what's reported below is working. Nothing 'fixed' yet, first build.
What is Fixed
Bootanimation not working
Mic not working
SDCard working again (broke after switch N blobs)
What is not working
Important
Fingerprint scanner not working (included, but not working)
Camera not working (killed it with kernel update )
Vibration not working (probably also kernel)
Adaptive brightness not working (after N blobs?)
Bluetooth not working (broke with switch to N blobs, works on images before 23-04)
Minor
Instructions
How to install Lineage 14.1
If you haven't run stock Android 6.x, flash that first with odin. (image won't boot without this step)
If you don't have TWRP yet, get it from here : TWRP by ashyx
Download the ROM and the Gapps that are located below to your device
Reboot into TWRP by holding VOL UP + POWER + HOME on boot
In case things go wrong make a backup
After the backup has completed return to home and select Wipe and then Advanced Wipe
Now ONLY tick Dalvik Cache, System, Data and Cache
After ticking those, Swipe below to wipe
Once the wipe has completed return to home and select the ROM
After you selected the ROM swipe below to install it
After the ROM has installed flash the Gapps
When all of this is done, reboot into system, wait, and enjoy Lineage 14.1
How to recover from issues
Looks like the reset to recovery (<HOME><VOL-UP><POWER>) is still broken on some or all T710/5 & 810/5 devices with this build.
Press and hold <HOME><VOL-DOWN><POWER> to enter 'download' screen.
Select cancel <VOL-DOWN>
Immediately press and hold <HOME><VOL-UP><POWER> to enter TWRP
Restore back-up made during installation phase
How to ROOT
Install the correct root package from here. (after flash of the image)
In LineageOS 14.1 Enable the developer options
Select Root access
Select Apps Only
Done
Questions and bug reporting
The following questions will be ignored
Inappropriate questions
Forced orders, EX. : "PLS FIX!!!!!!"
ETA's
Often repeated questions usually by the same user
Requests that are out of LineageOS's framework (Ex. Adding Samsung Apps)
How to report a bug/issue
Explain exactly what happens
Mention a log if you can (Please use hastebin or any other paste site to keep the thread clean)
If you can't mention a log, explain as precise as possible when, why and where it occurs!
Changelog
Code:
**********
16-12-2017 - Recompile with latest security patches. (5 dec patchset)
**********
19-11-2017 - Recompile with latest security patches. (6 nov patchset)
**********
17-10-2017 - Recompile with krack patches.
**********
6-10-2017 - Recompile with latest security patches. (5 okt patchset)
**********
12-08-2017 - Recompile with latest security patches. (5 aug patchset)
**********
16-07-2017 - Recompile with latest patches, BT seems to work. (needs more testing)
**********
07-07-2017 - Recompile with security level july 5th.
**********
04-07-2017 - Recompile with latest patches.
**********
20-06-2017 - Recompile with latest gts2-common patches.
**********
16-06-2017 - Recompile with june security patches.
**********
28-05-2017 - Adaptive brightness seems to work.
**********
14-05-2017 - Build SDCard fix, SD card wordk again. (BT still broken)
**********
28-04-2017 - Build with Nougat T815 (common) and T810 (device specific) blobs.
- Broke external SDCard, BT
**********
16/04/2017 - Patched mixer paths.
- Included ril changes from gts210ltexx as they are needed due to changes in common sections.
- Vibrate patch added.
**********
12/03/2017 - Rebuild with patchlevel March 5th..
**********
26/02/2017 - Switched back to Samsung RIL.
**********
06/02/2017 - First build from LineageOS Github.
**********
Downloads
Latest LineageOS 14.1 build : https://www.androidfilehost.com/?fid=962021903579500326
All LineageOS 14.1 BETA releases can be found here : https://www.androidfilehost.com/?w=files&flid=141202
Recommended GAPPS by opengapps.org : http://opengapps.org/ (I use pico)
Source
Special Thanks to @RaymanFX for releasing his Exynos 5433 source, without him this ROM would most likely not be possible!
All our sources can be found here : https://github.com/LineageOS/android_device_samsung_gts28ltexx
Screenshots
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
XDA:DevDB Information
LineageOS 14.1 for Samsung Galaxy Tab S2 8.0 T715, ROM for the Samsung Galaxy Tab S2
Contributors
T_I,CTXz, Sub77, Moonbutt74, RaymanFX, Hennymcc
Source Code: https://github.com/LineageOS/android_device_samsung_gts28ltexx/URL]
ROM OS Version: 7.x Nougat
Based On: LineageOS
Version Information
Status: BETA
Created 2017-02-05
Last Updated 2017-02-05
XDA:DevDB Information
LineageOS 14.1 for Tab S2 8.0 2015, ROM for the Samsung Galaxy Tab S2
Contributors
[URL="https://forum.xda-developers.com/member.php?u=4557146"]T_I, RaymanFX, CTXz
Source Code: https://github.com/LineageOS/android_device_samsung_gts28ltexx
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock Android 6.x flashed at least once before install
Based On: LineageOS
Version Information
Status: Beta
Created 2017-02-05
Last Updated 2017-12-26

Forgot 2 patches for the merge in Lineage, added them today and build image. OP updated.

Is there any diffrence to the build which was posted in the old thread?

xeta_at said:
Is there any diffrence to the build which was posted in the old thread?
Click to expand...
Click to collapse
Other then that the sources are coming from LineageOS github, nop. At least there are no changes in my sources, some in LineageOS sources, but I didn't notice any differences.
This was a test build to see if all was transferred correctly.

Ok.
Then I will wait for the next Update.
Except the mentioned problems the ROM already works fine for me.

Hi,
Have Problems with YouTube (Videos Looks after 30sec in Zoom) and Facebook Videos are Not starting.
(T715)

I think, I'll give it a try. Actually I'm using [ROM 5.0.2] [Kernel] [Mod] Tab S2 [T715-T715Y] v3.0 By Jafangie|Deodexed|Rooted . But there are still some issues, like failure "Gallery stopped".
Best regards
Tim

Slider-Override said:
Hi,
Have Problems with YouTube (Videos Looks after 30sec in Zoom) and Facebook Videos are Not starting.
(T715)
Click to expand...
Click to collapse
Same in T710 but it's random, I mean the YouTube problems

Great work, but this was built for the 10'' model. The screen size of the rom needs adjustment to fit exactly for this model. Other than that, once the important issues get resolved, this is my preferred ROM for my Tab S2. Already installed.

eliasps said:
Great work, but this was built for the 10'' model. The screen size of the rom needs adjustment to fit exactly for this model. Other than that, once the important issues get resolved, this is my preferred ROM for my Tab S2. Already installed.
Click to expand...
Click to collapse
You can try to set 700 instead of 768 dpi.

Yes, the camera isn't working.
In the upper tiles I found a button for the torch. The tablet hasn't a torch.

Sorry, this i my third post:
GPS isn't working . No signal in sight.

GPS isn't working .
Adaptive brightness with manual correction isn't possible.

+ hotspot won't work, video zooming in while changing to higher resolution

I use the fingerprint sensor a lot, maybe if this will be fixed i'll try the rom. I've heard about 7.1 coming for some 9.7" Tab S2 variant...not sure if 8" version will receive it too. But i didn't hope. Samsung teached me how to kill a device without major updates with my previous device.

Giuskiller said:
I use the fingerprint sensor a lot, maybe if this will be fixed i'll try the rom. I've heard about 7.1 coming for some 9.7" Tab S2 variant...not sure if 8" version will receive it too. But i didn't hope. Samsung teached me how to kill a device without major updates with my previous device.
Click to expand...
Click to collapse
Lineage 14.1 is Android 7.1, so yeah, it'll be there for T715. Fingerprint sensor isn't working on any Samsung device (at least on any Tab S2, 2015 or 2016 release). This is being worked on, at least for all Samsung Exynos devices. (common lib)

T_I said:
Lineage 14.1 is Android 7.1, so yeah, it'll be there for T715. Fingerprint sensor isn't working on any Samsung device (at least on any Tab S2, 2015 or 2016 release). This is being worked on, at least for all Samsung Exynos devices. (common lib)
Click to expand...
Click to collapse
Yeah i know that Lineage OS is Android 7.1, but i was talking about official one by Samsung. I've heard it's coming for some Tab S2 9" variants but it's not sure if it will be avaible for 8" models too. Anyway, hope that the fingerprint will be fixed soon thaks for all the work you do guys

Hello and a big thank for your work so far. I gave it a try (2017-02-06 build) and liked it very much. Despite the camera problem I encountered a strange behaviour when receiving the first call: I was able to pick up but couldn't hear anything. Then I tried to analyse the issue the behaviour changed - no incoming calls were possible. When I called someone from my mobile they could pick up the call but audio wasn't working. I couldn't hear anything and was not heard. Mobile data worked like a charm over LTE. Do you have an idea how and if this could be fixed? I would like to use Lineage OS as productive OS on my T715 and yes - I am using it for making phonecalls although it might look funny to see me with an 8" device attached to my head. I didn't try if audio would work with a BT device, but maybe I can test this on this WE. For now I'm stuck with stock rom again.
Thanks & Regards, Simon

As I just have a T710 on loan, I can't test RIL and call related issues. Mic should have been fixed, but I'm not sure.
As hardware libs were rewrittento change back to Samsung ril instead of the AOSP one, I had to copy a few gts210ltexx patches to gts28ltexx. I just did a recompile and uploaded the image. OP is updated. Haven't tested it. (I don't own a T715 and haven't had time to test if it'll boot on the T710)

Hello, thank you for the new build. I gave it a quick try, but unfortunately the SIM module didn't recognise my installed SIM card. I tried shut downs etc. So telephony is broken . I rolled back to stock immediately and it worked again.

[DISCONTINUED][ROM][UNOFFICIAL][gta4xl][10] LineageOS 17.1 for Galaxy Tab S6 Lite (LTE)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
FEATURES
SELinux enforcing
Improved Performance
Flip cover working
Touchscreen input disabled while using SPen
SPen tilt orientation working
Latest Linux 4.14.x kernel
ROM is signed with my developer keys
KNOWN ISSUES
Miracast not working (Google removed it in AOSP Pie)
You tell me
DOWNLOAD
Warning: 17.1 is now discontinued, please use 18.1 instead
Galaxy Tab S6 Lite LTE: lineage-17.1-20201215-UNOFFICIAL-gta4xl.zip
INSTALLATION
Follow the instructions at the TWRP Thread to install TWRP
If coming from another ROM (Stock ROM, GSI or whatever) you need to wipe data and cache
Also be sure your /data is ext4, if not format /data to ext4 (in TWRP at "Advanced Wipe" -> Select Data -> "Change Filesystem")
Put the ROM zip on your external sdcard (if you are already on my LineageOS and have decrypted /data you might also put it in internal storage) and flash it using TWRP
Optional:
Flash GApps
Flash Magisk
SUPPORT
Telegram support group
THANKS TO
@modpunk
@derf elot
I used their source code for LineageOS for Galaxy S10 series (which I have also contributed to) as base for my ROM.
XDA:DevDB Information
lineage-gta4xl, ROM for the Samsung Galaxy Tab S6 Lite
Contributors
Linux4
Source Code: https://github.com/gta4xl
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Beta
Current Beta Version: 0.8
Beta Release Date: 2020-09-23
Created 2020-09-23
Last Updated 2020-12-15

FAQ
Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues. Any bug not reported in the bug report format below may be ignored.
Code:
What is your--
LineageOS version:
LineageOS Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:

CHANGELOG
2020-12-15
Update to Linux 4.14.210
Add glove mode / high touch sensitivity mode
2020-12-05 system securitypatch
Netflix now works without liboemcrypto disabler (L3 only, Samsung doesn't seem to allow L1 with custom ROM installed)
2020-11-01 vendor securitypatch
2020-11-19
Fixed RIL on LTE variant
2020-11-08
Fix SPen tilt orientation issue (tilt_x and tilt_y were swapped)
Don't limit system inode count (should fix flashing bigger gapps packages)
Update Linux to 4.14.203
2020-11-05 system securitypatch
2020-10-15
Turn display off when closing flip cover
Fix audio output over usb-c
Improve audio quality
2020-10-08
Change SPen pointer to stock one
SELinux enforcing on LTE variant
Fix DT2W on LTE variant by updating dtbo sources from decompiled stock ones
Fix display bugs on LTE variant by updating dtbo sources from decompiled stock ones
Update to Linux 4.14.200
Fix bluetooth issues
2020-10-05 system security patch
2020-09-25
Enable nightlight (thanks to erfanoabdi)
Fix /system_root mounting issues in TWRP
2020-09-24
Update blobs to P61*XXU2BTI3, 2020-09-01 vendor security patch
Improves GPS speed
2020-09-23
Initial release

Reserved

Linux4 said:
FEATURES
SELinux enforcing
Improved Performance
Flip cover working
Touchscreen input disabled while using SPen
ROM is signed with my developer keys
KNOWN ISSUES
Miracast not working (Google removed it in AOSP Pie)
You tell me
DOWNLOAD
Galaxy Tab S6 Lite WiFi: lineage-17.1-20200923-UNOFFICIAL-gta4xlwifi.zip
INSTALLATION
If coming from stock or the other LineageOS ROM (GSI) you need to format /data with TWRP
Put the ROM zip onto your external sdcard (if you are already on my LineageOS and have decrypted /data you might also put it in internal storage) and flash it using TWRP.
THANKS TO
@modpunk
@derf elot
I used their source code for LineageOS for Galaxy S10 series (which I have also contributed to) as base for my ROM.
XDA:DevDB Information
lineage-gta4xl, ROM for the Samsung Galaxy Tab S6 Lite
Contributors
Linux4
Source Code:https://github.com/gta4xl
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Beta
Current Beta Version: 0.1
Beta Release Date: 2020-09-23
Created 2020-09-23
Last Updated 2020-09-23
Click to expand...
Click to collapse
Thanks your work cheers :highfive:

Installed Lineage and it was booting, but had some problems with installing Gapps.
After 3 attempts succeeded with installing Open Gapps pico from sd-card.
In the first 2 attempts, TWRP gave error "failed to mount '/system_root"
I found this: https://github.com/topjohnwu/Magisk/pull/2496 , probably due to dynamic partitions.
Wifi, Bluetooth, pen are working, but gps is not working.

Iceman66 said:
Installed Lineage and it was booting, but had some problems with installing Gapps.
After 3 attempts succeeded with installing Open Gapps pico from sd-card.
In the first 2 attempts, TWRP gave error "failed to mount '/system_root"
I found this: https://github.com/topjohnwu/Magisk/pull/2496 , probably due to dynamic partitions.
Wifi, Bluetooth, pen are working, but gps is not working.
Click to expand...
Click to collapse
Yes, TWRP's support for dynamic partitions is still not fully finished.
Gps is working for me, but it takes a very long time initializing, that should be fixed with the next update (I'm currently working on including Samsung's september secpatch update on which gps seems to work faster)

Linux4 said:
Yes, TWRP's support for dynamic partitions is still not fully finished.
Gps is working for me, but it takes a very long time initializing, that should be fixed with the next update (I'm currently working on including Samsung's september secpatch update on which gps seems to work faster)
Click to expand...
Click to collapse
Thx, keep up the good work!

I have uploaded an updated version with september vendor security patch which should also fix the gps issues

Dirty flashed the 0924 version, but i ran into the issue with system_root and got a bootloop.
After format with TWRP, clean flashed from SD-card and booted successful.
GPS is fixed!

I have uploaded a new version which fixes the /system_root mounting issues in TWRP (yes it was caused by LineageOS) but (only for this update, for the next ones it will work without reboot) you will have to reboot to recovery once the update finished to be able to install e.g GApps.

MicroG nanodroid doesn't work yet ? any alternative ?

StuKaGel said:
MicroG nanodroid doesn't work yet ? any alternative ?
Click to expand...
Click to collapse
I think nanodroid patcher is not supported on Q yet. You can build this rom yourself with signature spoofing patch or you can also use xposed + fakegapps module, but I dont know if it works on Q, you can try it out.

Fakegapps with microg via magisk worked wonders
Are there any way to customise the cursor? It's quite hard to see using the default cursor

StuKaGel said:
Fakegapps with microg via magisk worked wonders
Are there any way to customise the cursor? It's quite hard to see using the default cursor
Click to expand...
Click to collapse
It don't think it can be changed by user. Btw do you really mean cursor or the pointer used for spen?

Linux4 said:
It don't think it can be changed by user. Btw do you really mean cursor or the pointer used for spen?
Click to expand...
Click to collapse
The S-pen pointer
I found this guide https://daniel-baker.photography/asus-fonepad-7-change-mouse-cursor/ , but I don't want to revert to stock and don't understand how to extract the image file

StuKaGel said:
The S-pen pointer
I found this guide https://daniel-baker.photography/asus-fonepad-7-change-mouse-cursor/ , but I don't want to revert to stock and don't understand how to extract the image file
Click to expand...
Click to collapse
It can be changed using an overlay, but that would also change the pointer when using e.g Bluetooth mouse because both use the same pointer. I'll probably add that in the next build.

Linux4 said:
It can be changed using an overlay, but that would also change the pointer when using e.g Bluetooth mouse because both use the same pointer. I'll probably add that in the next build.
Click to expand...
Click to collapse
I think for most people using a mouse is not really important on this device (due to the s pen), thank you very much tho
btw, do I need to clean flash the next build or could I just dirty flash it + magisk when the next build rolls out (I don't particularly like google, so no Gapps for me) ?

StuKaGel said:
I think for most people using a mouse is not really important on this device (due to the s pen), thank you very much tho
btw, do I need to clean flash the next build or could I just dirty flash it + magisk when the next build rolls out (I don't particularly like google, so no Gapps for me) ?
Click to expand...
Click to collapse
Dirty flash should work but you should still make a backup! The other user only had to wipe because gapps failed to install and removing gapps requires a wipe.

Linux4 said:
Dirty flash should work but you should still make a backup! The other user only had to wipe because gapps failed to install and removing gapps requires a wipe.
Click to expand...
Click to collapse
Of course, a backup is always important for everything
Will await for your next release then, keep up the good work
on an unrelated note, SElinux is disabled on mine, is it because of magisk or is it because I haven't yet encrypted my device ?