Database Develop

[DISCONTINUED][UNOFFICIAL] SlimLP - [02 May 2016]

Disclaimer
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications.
Prerequisites for Installation
- Must have an unlocked bootloader
- Must have working TWRP
Known Issues
- MINOR - On Apollo there is a small glitch in rotation animation when screen transitions between on->off state
- MEDIUM - Bluetooth, GPS and LTE need to be debugged
Tips
- For ROOT ACCESS see Question 1 on the Frequently asked questions
Fresh Installation
- Factory Reset
- Flash the ROM File
- Flash any 5.1, arm 32-bit version Open GAPPS of your choice.
- Reboot
- On first boot it will take about 15-30 seconds before the boot animation appears
Upgrading to new Version
- Flash the ROM File
- Reboot
Downloads
- APOLLO rom
- THOR rom
- GAPPS
Source Code
- Kernel Source and Device Trees are here.
Credits
- Cyanogenmod
- CodeAurora
- Hashcode
- Cpasjuste
- dpeddi
XDA:DevDB Information
SlimLP, ROM for the Amazon Kindle Fire HDX 7" & 8.9"
Contributors
ggow
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader Only
Based On: Slimroms
Version Information
Status: Beta
Created 2015-09-04
Last Updated 2019-10-02

Release Notes / Changelog
2015-09-04
- Initial Release
- Kernel:
Based off Amazon Stock 4.5.5 for which we don't have the commit history so I have manually by hand done all the updates.
Rebased MDSS MDP Driver from CAF branch LA.BF.1.1.1.c4-03300-8x74.0
Upgraded a lot of code from the same CAF branch
More features coming soon
2015-09-05
Temporary Fix for Thor screen not coming out of standby correctly
Still a tiny bit more work needed in kernel for mdss mdsp driver
2015-09-15
Rebased mdss driver now fully working on Thor
Kernel has had a lot of work, see bitbucket page for changes
RRO Layers 2.1 have not been merged yet
Tried to cherry pick RRO Layers commits but received bad object errors
Updated to latest Slim 0.7 BETA code
Bluetooth is under investigation, sees devices but doesn't seem to pair
Switched bluetooth libs to been built from source
GPS is untested
LTE is untested
Battery Stats still needs to be fixed, needs investigation
2015-09-21
Update SlimLP code
Enable Sim Toolkit
Made changes based on provided logs to try to enable LTE
Recommended Gapps is now Open Gapps, linked in the OP.
2015-10-27
Update SlimLP Code
2015-11-07
Update SlimLP Code
2016-05-02
Updated kernel to the lastest CAF branch
Updated to latest SlimLP Code
Build bluetooth stack from source
Still working on Bluetooth - passkey pairing seems to be broken

Frequently Asked Questions
Question 1:
How do I get ROOT access?
Answer:
- Unlock developer options: "Settings" ➜ "About phone" ➜ Tap the build number 7 times
- Go back to "Settings" ➜ "Developer options" ➜ "root access" ➜ choose your desired option

Thank you so much for your and other developers hard work!
Will try this rom and give you a feedback ...

Hi, I wanna give you a quick feedback after 1 hour on the thor rom...
1) after the installation (did a factory reset) it comes with a bluethoot error and the service doesnt work.
I did a restart and switched it on ... off ... on ...off the first and secound time bluethooth seems to work (but did'nt make a link) but after that the service didnt come back.
2) After I switch off the display I have to reboot to get it back. So I only get a blackscreen with backlight.
3) Rotation works well but a few apps rotate in the wrong direction. But this is not a big thing!
4) Batteryusage didnt show apps and the graphic locks buggy
this are my first impressions
cocoon

cocoon4u said:
Hi, I wanna give you a quick feedback after 1 hour on the thor rom...
1) after the installation (did a factory reset) it comes with a bluethoot error and the service doesnt work.
I did a restart and switched it on ... off ... on ...off the first and secound time bluethooth seems to work (but did'nt make a link) but after that the service didnt come back.
2) After I switch off the display I have to reboot to get it back. So I only get a blackscreen with backlight.
3) Rotation works well but a few apps rotate in the wrong direction. But this is not a big thing!
4) Batteryusage didnt show apps and the graphic locks buggy
this are my first impressions
cocoon
Click to expand...
Click to collapse
- To be honest I developed this on apollo
- Didn't really test much on thor so probably problems in the kernel causing blackscreen for thor
- seems to work flawlessly on apollo
- will look into thor issues before next build
- thanks for the early feedback
- updated op known issues
Sent from my Fire Phone using Tapatalk

Thanks!
Excellent work @ggow, I just dirty flashed Apollo version, and must say I am pretty impressed, everything vent smoothly, the only FC I get was from clock app, but that was expected... :good:
Is there any recommended xposed version working with this ROM?
So far I found one small graphic glitch, you can see it on attached picture (you can see only half of the first notification)...
OK that's all for now, going to test how fast this can burn through hdx battery, so far every LP ROM I tested on my phones was really power hungry...

I've tried this ROM.. smooth as hell...
but if I not geting wrong, no LTE...( I am on Apollo)
Is that right? Or I made something wrong...

jeryll said:
Excellent work @ggow, I just dirty flashed Apollo version, and must say I am pretty impressed, everything vent smoothly, the only FC I get was from clock app, but that was expected... :good:
Is there any recommended xposed version working with this ROM?
So far I found one small graphic glitch, you can see it on attached picture (you can see only half of the first notification)...
OK that's all for now, going to test how fast this can burn through hdx battery, so far every LP ROM I tested on my phones was really power hungry...
Click to expand...
Click to collapse
- thanks, glad you like it
- I wouldn't recommend xposed with this rom. May not play nice as aosp

ka_putt said:
I've tried this ROM.. smooth as hell...
but if I not geting wrong, no LTE...( I am on Apollo)
Is that right? Or I made something wrong...
Click to expand...
Click to collapse
- I didn't think LTE would work
- that's gonna be a separate debugging exercise

How's Bluetooth? I know CM12 has some issues.

EncryptedCurse said:
How's Bluetooth? I know CM12 has some issues.
Click to expand...
Click to collapse
- Bluetooth will probably also need a bit work

ggow said:
- I didn't think LTE would work
- that's gonna be a separate debugging exercise
Click to expand...
Click to collapse
Ah OK. Good to know..
:good:

New Build For Thor
- This temporarily patches the problem on Thor with the screen not coming out of standby properly

What is the difference between this and the CM12 one that was updated the 15th of August?

DarkenedMatter said:
What is the difference between this and the CM12 one that was updated the 15th of August?
Click to expand...
Click to collapse
- Best to try it and find out.
- New kernel based on and modified from Stock 4.5.5 and latest MSM8974 CAF branch
- Rebased MDSS kernel driver is fully functional on Apollo Devices

Does the Apollo support otg? I just plugged my USB otg from my nexus 6, but stick mount says there isn't anything that needs mounted,

holeshot77 said:
Does the Apollo support otg? I just plugged my USB otg from my nexus 6, but stick mount says there isn't anything that needs mounted,
Click to expand...
Click to collapse
- OTG support isn't available at least at the moment.
- Not completely certain what the story is with OTG on Apollo and Thor
- I have seen various comments about this
- Some have said it might be a limitation of the hardware or a limitation imposed from the bootloader.
- Needs investigating to be sure of what can be done.

well xposed for LP actually works
ggow said:
...
- I wouldn't recommend xposed with this rom. May not play nice as aosp
Click to expand...
Click to collapse
I just had to try it and it's working! :laugh:
So if anyone wants to try xposed for lollipop, go for it (make sure you don't have any "xposed leftovers" from KitKat like me (gravity box i. e.) and uninstall them first)
be sure you did nandroid backup in TWRP before you flash xposed for lollipop in TWRP (yes, framework needs to be flashed)
I used xposed-v73-sdk22-arm.zip
Reboot into ROM and install XposedInstaller_3.0_alpha4.apk
That's it, happy hacking...

YouTube in FullHD
And I don't know what magic @ggow did this time, but we finally have here YouTube app where we can choose 1080p streaming ! Yay! This just made my day!
Or Google finally allowed this for every mobile users in latest YouTube app? Anyone on CM11 or Nexus 4 can check if its there too?

[E6683/E6653][Single/Dsds][ROM][CLANG][7.1.1][Themes]PixN Rom [3/01/17]

PixN Rom​** Theme friendly ** Better Camera ** exFAT ** Optimized kernel ** Substratum ** Clang ** Custom Settings **
This is my daily driver which I update occasionally depending on weather I need/want new features. There won't be any OTA's because of work. Do please also check the Credits section, and the Screenshots tab.
I do not have a single sim device, however I have compiled kernels for the single sim and dual sim variant both.
The kernel thread has now been split to be here since the kernel gets more updates than the rom (for now atleast).
This project has been renamed to show the my first forays into more *real* development.
Please use the Feature Request tab for feature inclusion requests.
It's also very hard to keep track of bugs reported here in the comments so please, again, use the bug reports tab...
I'm very thankful to everyone commenting, it's just hard to keep track sometimes, and seeing as DevDB has all the features required...
Since I also use XDA Labs which has no DevDB support it'd be best to comment AND add the comment in the required DevDB tab..
Features Implemented
Release 1
SonyAosp Based
OMS Substratum Support with Masquerade (from CarbonROM)
Thermal-engine (CarbonROM)
Gapps Inbuilt (OpenGapps)
Supports Assistant Activation
Increased Call Log History
Working Advance Reboot Menu (SonyAosp)
Commit history in Changelog (SonyAosp)
Screen dimmer. (Elementalx Kernel)
Release 1.99
This is a beta release which sort of currently BREAKS BLUETOOTH. (will be fixed in Release 2)
Working Camera (The google camera crashes but open camera and whatsapp camera work usually, some crashes are still there but the pictures are clear (front camera colors are a bit washed out) and no inversion or anything)
Sdcarfs (should fix exfat)
Fixed the wakelock issue (IPA and others)
Fixed substratum for the e6653
Stability Tweaks
Release 1.999
Please extract the zip and fastboot flash both the system and the kernel..
Working Camera (Works for me)
Built with CLANG
Fixed the slow charging
Native ntfs and exFAT
More Stability Tweaks
Built with newer external libraries
Added Vanilla Music Player
More features coming soon, framework buildup.
Release 3
Please extract the zip and fastboot flash both the system and the kernel.. This is a deodexed build and has a slow FIRST boot.
Status Bar swipe to increase brightness
Customize Nav Bar
Fixed Substratum
Double Tap status bar to sleep
Music Controls
Close foreground app with long press
Screen Record
Native Screenshot edit options
All other OmniGears features as of 7.0
Busybox built in (toybox is too limited)
Some new bugs which will be fixed. Report them asap!
Release 3.1
Minor Bugfix release.
Squashed that damn irritating power button reboot
Also has a new minor kernel update
Release 4
Major release. Name change, fixes... the full changelog is HUGE
Fixed LEDs
Fixed Power reboot issues
Added my own custom settings based off Benzo and Flash Roms
Ambient display
NETWORK TRAFFIC MONITOR!!
LED Control (Cyanogenmod)
Default pixel coloring
Added substratum and superuser tiles in settings
Double tap to sleep anywhere
Adblock from the MoaAB Project
Navigation bar edits
Pulse
Smartbar
Fling
Toast icons
Fixes and stuff check changelog.
Sdclang and Clang build
Release 5
Major release. Android version upgrade. I can't remember the whole changelog.
Rebased to Android 7.1.1
Therefore all 7.1.1 features, most notably, automatic background update handling and faster UI
Built with GCC 6.x as well as Clang 3.9 for speed and battery
All the features made it through intact including themes
Introducing Moves, which are quick shortcuts
All the libraries have been optimized and rebuilt mostly
Uses a Relatime Thread for the UI
Release 5.5
Bugfixes. Everyone should get this.
Fixed all the Settings
Added charging current and voltage
Release 6
More fixes and features.
Fixed all the Settings (again)
Added memory bar option
QS Header Icon settings
Date and time for header modifications
Auto launch music player
Release 7
Major fixes
Updated externals
Fixed fingerprint thanks to @Myself5
Working
Almost everything.
Originally based on the test data over here.
Single Sim Support
Dual Sim Support
GPS
Bluetooth
SMS
SD Card
Fingerprint
Partially Working / Buggy
Camera (Mostly working)
PicoTTS sometimes crashes (reported by @Azrael6947 ) Not an issue from 1.99
Sometimes these wakelocks prevent deepsleep. Disable the services and use suggested apps to fix. (as reported by @Sh4douw)
Release 3
Sorry but these are mostly due to a rushed release. ALL of these WILL be fixed asap.... All done!
The LED won't turn on while charging, but it still charges and shows the animation. (Fixed in 4)
The power button sometimes causes random reboots (Fixed in 4)
Power menu isn't themed yet (Fixed in 4)
The omnigears settings look like they don't stick (checkboxes) but they actually do (My settings do stick in 4)
Release 5
These are to be removed in the next release
The statusbar battery in the icon doesn't work. Everything else does. (Fixed in 6)
Lockscreen shortcuts don't work yet (Fixed in 5.5)
Lockscreen voltage and charging current doesn't work yet (Fixed in 5.5)
Weirdly I managed to get the advanced reboot menu to turn up while using the Power Off option too so for now to really turn it off you'll need to choose bootloader
Not Working
Inbuilt Recovery (Weirdly) (Use the one in the suggested extras)
Fingerprint Manager (Asks for it in settings but never works) (Fixed from 7 onwards)
Bluetooth for E6683 (Fixed)
Suggested Extras
Recovery
SuperSU (suhide causes bootloops)
Magisk with phh's Superuser (New root interface with persist options)
AutoMagisk for hiding root
Assistant Enabler Zip Or App
Substratum
Substratum Pixel Theme
Naptime & Doze for better standby drain.
If the brightness is too dim you can turn the dimmer on and off by the following
You can echo 0 to disable and echo 1 to enable it via the sys path /sys/module/mdss_fb/parameters/backlight_dimmer
Click to expand...
Click to collapse
Please feel free to report more bugs, or even request more features but I'm not a dev so, no guarantees.
Installation Instructions
Eventually these will be flashable zips, however right now they're causing an error (IOError: [Errno 28] No space left on device)
So for now install by fastboot
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash recovery recovery_3.0.2.img
I don't recommend wiping userdata via fastboot so if you want you can always factory reset or clear Data, Cache, Dalvik and System from TWRP.
EDIT:- People having trouble flashing the system.img should try with mfastboot (fix found by @katibehi)
Downloads​
The DevDB downloads are for the system.img and boot.img files only. They're in 7z cuz otherwise I can't upload them.
Get the latest kernel from the PixN kernel thread here.
Beta Release 1.999
This is in the DevDB download. The changelog is incorporated into the feature list.
The .7z is NOT FLASHABLE.
Extract it and fastboot flash the file as fastboot flash system filename.img
Click to expand...
Click to collapse
Beta Release 3
MAJOR RELEASE. Go get it.
Beta Release 3.1
Bugs squashed. Notably the reboot.
Beta Release 4
Biggest YET!! Most feature complete rom around.
Beta Release 5
Bigger than ever (feature wise). First and only 7.1.1 build for our devices. Happy New Year!
Sadly this release is not on DevDB.. Since DevDB won't finish attaching files as of 1st Jan and I don't even know if it'll be back. I'm really hoping for a basketbuild account, cuz then I'll be able to serve OTA's. Anyway.
For now due to popular demand this release, Release 5 is uploaded to MEGA.
Beta Release 5.5
Still on MEGA.
The link to the folder is here
Beta Release6, 7
Mega again... Until DevDB is back up assume all future releases to be on MEGA for now.
The link to the folder is here
For mobile users to get to the downloads section just hit the big DOWNLOADS button.
FAQ/Frequent Statements
Q0: When ${THING}?
A0: No ETAs. Don't ask.
Q1: You list my phone above but there isn't a build uploaded, why not?
A1: Haven't gotten around to it yet.
Q2: But when will you get to building it?
A2: Damn it, see Q0/A0.
Q3: How often will builds be produced?
A3: Whenever I get to them and feel like uploading.
Q4: But ${THING} isn't working for me. I cannot live without ${THING}.
A4: Not surprising, nougat is still young. Some features aren't ported and some may still be buggy. Maybe this isn't ready for you yet. And don't cry.
Q5: Xposed?
A5: Don't know. Maybe, maybe not. I'll ignore you if you complain about something and are using Xposed. Not out for nougat yet.
Q6: Can I complain about something?
A6: I'd prefer not, but be prepared for me to ignore you.
Q7: Can I report a bug?
A7: Absolutely. Please mention the kernel version and any additional files you flashed. Create a logcat.
Q8: When will you fix ${THING} that I just reported?
A8: Damn it, see Q0/A0. And if your ${THING} isn't something that bothered me, it probably just got shuffled to the back of the line.
Q9: Can I donate?
A9: Sure! Whatever you can. This takes a lot of time. Apparently not.
Q10: What is this "sdclang" thing?
A10: CM is using a optimized version of the clang/llvm compiler for official builds of Qualcomm devices. I'm using it for my own builds. See these links here and here.
I've depreciated this to move to Clang 3.9 (newer).
Click to expand...
Click to collapse
Full Changelog
These were clogging up my XDA Labs view of the thread. I'll make a github repo for them soon.
Credits
@The Flash for his kernel and rom. (Disputed)
[*] @JerryLaiHMmmmmm for showing the community AOSP was possible.
[*] @zacharias.maladroit for the recovery and his excellent kernel.
[*] @RyTekk also for his kernel source and inputs.
[*] @Myself5 for setting me straight about the E6683 kernel issues and for all the work done on sony devices.
[*]@frap129 for his excellent MapleAOSP
[*] @pollob666 for the call log fix.
[*] @haggertk for the FAQ.
[*]@BSDgeek_Jake for MoaAB.
[*] Sonyxperiadev Team.
[*] SonyAOSP Team.
[*]OmniRom Team.
[*]DirtyUnicorns Team.
[*]PureNexus Team.
[*]BenzoRoms Team.
[*] CarbonROM Team (Best gerrit ever).
[*] Substratum Team.
[*] AOSP providers.
[*] Everyone testing this.
If I've forgotten anyone I'll add them later, especially if someone reminds me...
Sources
All of them are up on github now... here!
The kernel is given here.
XDA:DevDB Information
PixN Rom, ROM for the Sony Xperia Z5
Contributors
HaoZeke
Source Code: https://github.com/PixN-ROM
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: 5.5
Beta Release Date: 2017-01-03
Created 2016-11-10
Last Updated 2017-01-11

I just tried it on my E6633
Everything works except the camera which didn't want to work, even after some reboots.

Sh4douw said:
I just tried it on my E6633
Everything works except the camera which didn't want to work, even after some reboots.
Click to expand...
Click to collapse
Well.... I'd suggest you wait for a while after the reboot.. Then try the internal camera in WhatsApp... That works for me..
Though the camera problem is basically across all aosp builds until Sony or cyanogenmod or someone fixes it...

First of all thanks for your great effort! this rom is amazing.
Well time to report.
First, battery life is quite amazing, over 5 hours of sot. (around 3 in stock rom)
Second, the 64gb sd card won't get recognized... but on the other hands 32 gb one works well.
Regards,
Jerry
P.s. if you would like to solve the camera issue try to dig into @infected_'s repo... His roms had solved the camera problem.

JerryLaiHMmmmmm said:
First of all thanks for your great effort! this rom is amazing.
Well time to report.
First, battery life is quite amazing, over 5 hours of sot. (around 3 in stock rom)
Second, the 64gb sd card won't get recognized... but on the other hands 32 gb one works well.
Regards,
Jerry
P.s. if you would like to solve the camera issue try to dig into @infected_'s repo... His roms had solved the camera problem.
Click to expand...
Click to collapse
Thanks for the heads up I'll definitely look into it
I'm not sure why the 64 gb cards don't work...
I'm not having issues with my 128gb sd card but it did format it before it would work..
Has it offered to format the sd card?
EDIT: @infected_ also seems to have used the same sonyAOSP repositories for his aosp build...
It's unlikely but maybe a different tool chain might help... I'll check. Also they seem to be all marshmallow builds... That might also be behind their camera working better...

camera isnt working yet on AOSP, on the kitakami/msm8994 family and all others. with some hacks msm8974 was taking pictures, but nothing stable.
regards.

What about the battery life during the night for you ?
It started from 82% at 2:00 AM, and now it's at 65%...

Sh4douw said:
What about the battery life during the night for you ?
It started from 82% at 2:00 AM, and now it's at 65%...
Click to expand...
Click to collapse
Yikes, that seems really awful. I'd suggest you use naptime for aggressive doze.
You could also try the doze app which stops background data for chosen apps...
With naptime installed you should get much better battery life...
Did you clean flash this?

HaoZeke said:
Yikes, that seems really awful. I'd suggest you use naptime for aggressive doze.
You could also try the doze app which stops background data for chosen apps...
With naptime installed you should get much better battery life...
Did you clean flash this?
Click to expand...
Click to collapse
I'll try Naptime and Doze app secondly.
Thanks for your tricks. I will tell you if it resolved my issue
And yup, I did a clean install

I can't flash system.img, fastboot shows this error
(load_file: could not allocate -1585037392 bytes
error: cannot load 'system.img')
I downloaded system.img two times but same error.

katibehi said:
I can't flash system.img, fastboot shows this error
(load_file: could not allocate -1585037392 bytes
error: cannot load 'system.img')
I downloaded system.img two times but same error.
Click to expand...
Click to collapse
Which system are you coming from?
I think that error probably has to do with the larger size of the system image because of gapps being included..
Are you trying a full wipe?

finly i flashed it every think is good but camera dosent work. for now i come back to stock.camera important for me.thanks for your work

Is it possible to make this compatible with the E6653 device? The rom loads perfectly on my phone, only thing not working is my SIM card because I dont have a DSDS phone.

Azrael6947 said:
Is it possible to make this compatible with the E6653 device? The rom loads perfectly on my phone, only thing not working is my SIM card because I dont have a DSDS phone.
Click to expand...
Click to collapse
Yup it is possible and I'll release a working boot.img for the e6653 with the next release (hopefully today itself)
Actually the delay is because I'm compiling with uber but my first build was laggy as hell.

Azrael6947 said:
Is it possible to make this compatible with the E6653 device? The rom loads perfectly on my phone, only thing not working is my SIM card because I dont have a DSDS phone.
Click to expand...
Click to collapse
Why you don't flash this(http://forum.xda-developers.com/xperia-z5/development/cyanogenmod-14-1-xperia-z5-e6553-t3493283) on your e6653?

katibehi said:
Why you don't flash this(http://forum.xda-developers.com/xperia-z5/development/cyanogenmod-14-1-xperia-z5-e6553-t3493283) on your e6653?
Click to expand...
Click to collapse
Actually trying that one now, funnily enough it's not detecting my SIM card either. Never had this issue before, might be because I am in Australia.
---------- Post added at 10:26 PM ---------- Previous post was at 10:07 PM ----------
HaoZeke said:
Yup it is possible and I'll release a working boot.img for the e6653 with the next release (hopefully today itself)
Actually the delay is because I'm compiling with uber but my first build was laggy as hell.
Click to expand...
Click to collapse
Haha, you have no idea how excited I am right now. Eagerly awaiting that upload. Soon as it's up, I'll load it up and if all works well I'll use it for a while and give you some feedback.
Unfortunately the CM 14.1 ROM that was posted (which is for the E6653) cant detect my SIM either, lot of other people are having that issue too. Hopefully yours will be that stock experience I'm looking for.

Sh4douw said:
I'll try Naptime and Doze app secondly.
Thanks for your tricks. I will tell you if it resolved my issue
And yup, I did a clean install
Click to expand...
Click to collapse
Ok, so I installed Doze, Greenify (without Xposed, hope that it will be compatible with Android Nougat soon ), and NapTime. Without effect, always 2-3% drain per hour.
I realized that my device won't deep sleep, it was always in activity even when I wasn't using it.
I searched for wakelocks, and noticed that Google services were faulty. I disabled some of them after searched online, and it's better

I think without camera, the rom isn't complete. I am waiting for that.

Azrael6947 said:
Actually trying that one now, funnily enough it's not detecting my SIM card either. Never had this issue before, might be because I am in Australia.
---------- Post added at 10:26 PM ---------- Previous post was at 10:07 PM ----------
Haha, you have no idea how excited I am right now. Eagerly awaiting that upload. Soon as it's up, I'll load it up and if all works well I'll use it for a while and give you some feedback.
Unfortunately the CM 14.1 ROM that was posted (which is for the E6653) cant detect my SIM either, lot of other people are having that issue too. Hopefully yours will be that stock experience I'm looking for.
Click to expand...
Click to collapse
I believe the sim detection in @fergy's rom has been fixed by him.. check the last posts in that thread...
I do honestly believe aosp is doing better than cm-14.1 at the moment, mostly because CMTE hasn't been doing well on the newer CM roms while Substratum is working really well...
I'm uploading a single sim kernel to release 1. Since the Uber builds are being more trouble than help...
Test it and tell me how it goes...

katibehi said:
I think without camera, the rom isn't complete. I am waiting for that.
Click to expand...
Click to collapse
On release 2 (testing) with the Uber toolchain, Open Camera works... however the rom is overall very laggy using uber...
So I'll be looking into other opportunities...
By the way, have you found any non-stock rom (AOSP,CM etc) here or elsewhere with a working msm8994 camera?
If yes please link the repos here, I'll gladly try to incorporate it.

[ROM] Mokee

Hello,
I just open this thread to discuss about the rom and share issues.
The rom is very close to Android stock.
Issues that I have encountered (Build: 2017-10-08):
-Led notification is blinking very very fast (and change settings does nothing)
-Bluetooth audio (for music and video) does not work (I haven't tried calls)
Camera works, fingerprint is fast as in MIUI, run smoothly
You must format data before flashing (or it will bootloop)
Link: https://download.mokeedev.com/?device=chiron

Wahoux said:
Hello,
Issues that I have encountered (Build: 2017-10-08):
-Led notification is blinking very very fast (and change settings does nothing)
-Bluetooth audio (for music and video) does not work (I haven't tried calls)
Camera works, fingerprint is fast as in MIUI, run smoothly
You must format data before flashing (or it will bootloop)
Link: https://download.mokeedev.com/?device=chiron
Click to expand...
Click to collapse
- Bluetooth audio bug is same as that in Mokee Xiaomi Mi 6 rom, dev has replied in their forums the next nightly should have it fixed.
- Notification light bug will not be fixed until source is out (dev replied on when i listed the bug on Mokee forums)
Another thing ive noticed:
- The rom included a non-official xposed port for nougat which I cant remove, only disable
- Rom does not pass safetynet. Tried magisk+hide to no avail

Wahoux said:
Hello,
I just open this thread to discuss about the rom and share issues.
The rom is very close to Android stock.
Issues that I have encountered (Build: 2017-10-08):
-Led notification is blinking very very fast (and change settings does nothing)
-Bluetooth audio (for music and video) does not work (I haven't tried calls)
Camera works, fingerprint is fast as in MIUI, run smoothly
You must format data before flashing (or it will bootloop)
Link: https://download.mokeedev.com/?device=chiron
Click to expand...
Click to collapse
Ugh, no bluetooth audio is a killer for me. I do like the idea of a near stock Android though...

Safetynet is the killer for me. Need bank apps to work.

duraaraa said:
Safetynet is the killer for me. Need bank apps to work.
Click to expand...
Click to collapse
True, but if they pre-installed xposed and made it un-removable, then safety net will always fail...

I am loving this ROM! The battery life doesn't seem as good as eu rom. Also notice volume for YouTube seems low at Max setting. Other than that this is amazing stick room with Xposed and Gravity box!
---------- Post added at 09:00 PM ---------- Previous post was at 08:39 PM ----------
BTW... Bluetooth for calls works flawlessly

ugene1980 said:
- Bluetooth audio bug is same as that in Mokee Xiaomi Mi 6 rom, dev has replied in their forums the next nightly should have it fixed.
- Notification light bug will not be fixed until source is out (dev replied on when i listed the bug on Mokee forums)
Another thing ive noticed:
- The rom included a non-official xposed port for nougat which I cant remove, only disable
- Rom does not pass safetynet. Tried magisk+hide to no avail
Click to expand...
Click to collapse
Seems the buildbot is failing for our device
http://build.mokeedev.com/nightly/

ninjazin said:
Seems the buildbot is failing for our device
http://build.mokeedev.com/nightly/
Click to expand...
Click to collapse
Yep, hopefully someone will look into it soon.

ugene1980 said:
- Bluetooth audio bug is same as that in Mokee Xiaomi Mi 6 rom, dev has replied in their forums the next nightly should have it fixed.
- Notification light bug will not be fixed until source is out (dev replied on when i listed the bug on Mokee forums)
Another thing ive noticed:
- The rom included a non-official xposed port for nougat which I cant remove, only disable
- Rom does not pass safetynet. Tried magisk+hide to no avail
Click to expand...
Click to collapse
Safetynet doesn't pass with xposed.. uninstall it

Shoot. No VOLTE on T-Mobile.. Every time I make a call I notice it drops to 3g or H+. Anyone know a fix?

Also, when making a 3 way conference call the phone app force closes and can't open.

11/11 build of Mokee is just out~ go grab it!

ugene1980 said:
11/11 build of Mokee is just out~ go grab it!
Click to expand...
Click to collapse
Hi,
Woah... 11/11 released on 10/11 ! that is looking into the future
Anyways, jokes apart, did you try it and if so, is Bluetooth audio working ? It's something I would need
By the way : I just looked into the Mokee source. It seems they have the source for device and vendor.
Anyone knows if the msm8996 kernel for xiaomi would work with these ? tat would allow to build other ROM's.
Regards.

NexusPenguin said:
Hi,
Woah... 11/11 released on 10/11 ! that is looking into the future
Anyways, jokes apart, did you try it and if so, is Bluetooth audio working ? It's something I would need
By the way : I just looked into the Mokee source. It seems they have the source for device and vendor.
Anyone knows if the msm8996 kernel for xiaomi would work with these ? tat would allow to build other ROM's.
Regards.
Click to expand...
Click to collapse
Have not tried it~ (bt-audio should be fixed as the mi6 had the same issue and is fixed with currently nightly, dev also added aptx+aptxhd in addition to a2dp)
Mix2 hasnt had it's source released, the maintainer for mix2 happens to be the maintainer for the mi6 (which had it's sources released). As the both use smiliar hardware (sd835, camera sensor) they messed around to get the mix2 rom up. Which is why somethings will not work properly until mix2 sources are released (like the prox sensor and the notif light)

ugene1980 said:
Have not tried it~ (bt-audio should be fixed as the mi6 had the same issue and is fixed with currently nightly, dev also added aptx+aptxhd in addition to a2dp)
Mix2 hasnt had it's source released, the maintainer for mix2 happens to be the maintainer for the mi6 (which had it's sources released). As the both use smiliar hardware (sd835, camera sensor) they messed around to get the mix2 rom up. Which is why somethings will not work properly until mix2 sources are released (like the prox sensor and the notif light)
Click to expand...
Click to collapse
OK... anywyas : 10/11 doesn't work properly it seems... Got a ****load of errors at boot and then it's stuck at "Looking for updates"
Back to EPIC ROM...
Regards.

NexusPenguin said:
OK... anywyas : 10/11 doesn't work properly it seems... Got a ****load of errors at boot and then it's stuck at "Looking for updates"
Back to EPIC ROM...
Regards.
Click to expand...
Click to collapse
that sucks...Full wipe?

Downloading now. First I Will try dirty over which I am currently running. If that doesn't work I will do a full wipe. Last version of mokee running great for me

stu5797 said:
Downloading now. First I Will try dirty over which I am currently running. If that doesn't work I will do a full wipe. Last version of mokee running great for me
Click to expand...
Click to collapse
It was. Just needed BT audio. if you confirm i'll switch ASAP

On the newest mokee! You need to wipe everything and do a clean install. Dirty flash and you get a bunch of errors and need to reboot into recovery

stu5797 said:
On the newest mokee! You need to wipe everything and do a clean install. Dirty flash and you get a bunch of errors and need to reboot into recovery
Click to expand...
Click to collapse
It works? BT audio? ::highfive:

Nokia5 Ports by Markus

Hello everybody! I waited for a long time for unofficial roms and source code, but.....you know. So i decided to make it by myself.
I ported 2 roms: RR from Xiaomi redmi 3s and stock from Asus zenfone 4 max
Both roms in alpha state, so i hope, you will help me with fixing bugs
Download links:
Asus port
Resurrection remix from xiaomi 3s
Installation:
1. Unlock you bootloader!!!!
2. Downgrade stock rom to 7.1x to avoid problems
3. copy on sd card
4. backup and wipe all
5.install zip
6. reboot
Works:
-sim
-3g/lte network
-internet sharing
-bluetooth
Bugs(not full list):
On both roms:
-no audio
-no wifi
-no sensor keys work
On rr:
-lockscreen cannot be unlocked, so i disable it first in secure settings
On asus port:
-rotated screen
-input sensor problem(can be fixed by libinput.so and may be in /hw folder by sensors.so)
If you want buy me coffe here is my paypal: https://www.paypal.me/markusll/
XDA:DevDB Information
Ports for nokia 5, ROM for the Nokia 5
Contributors
markus_ll
ROM OS Version: 7.x Nougat
Version Information
Status: Alpha
Created 2018-07-28
Last Updated 2018-07-28

Thanks ...waiting for more

Good job mate, will try to make out time to try it out

when we get the bug free custom rom

Jitender Baloda said:
when we get the bug free custom rom
Click to expand...
Click to collapse
Custom rom development on Nokia phones is a recent development, stable roms come about after lots of testing and sometimes with contribution from group of people.
Instead of asking when a stable rom will be ready which I'm sure the OP doesn't know, it would be more helpful if you helped by testing and maybe giving helpful suggestions on how he can fix bugs
@op the moto g5 has similar specs with the nokia 5 (apart from the display size) and uses almost stock android like Nokia. I wonder whether one it's possible to get some elements from there.
I do know that twrp for nokia 6 works for Nokia 5

@sltushar, I was wondering if you could help out with this, if you are into this kind of stuff

redweaver said:
@sltushar, I was wondering if you could help out with this, if you are into this kind of stuff
Click to expand...
Click to collapse
Okay, thanks for the invitation, i will try my best to make it on beta state or stable

Hello again. Here is new update. I think it's in pre-beta stage
What's new:
-fixed wifi
-better working stability
-fixed rotatated screen
-fixed input sensor
-remade ramdisk, it's looks like nokia original
-fixed hardware buttons (vol+,vol-,power)
Not working now
- touchpanel with fingerprint
- camera
- sound
- may be microphone???
- nfc
- may be something else (waiting for bug report messages)
Download link
Asus_pre_beta
P.S. if you want to speed up this process, try to fix sound or touchpanel with fingerprint

markus_ll said:
Hello again. Here is new update. I think it's in pre-beta stage
What's new:
-fixed wifi
-better working stability
-fixed rotatated screen
-fixed input sensor
-remade ramdisk, it's looks like nokia original
-fixed hardware buttons (vol+,vol-,power)
Not working now
- touchpanel with fingerprint
- camera
- sound
- may be microphone???
- nfc
- may be something else (waiting for bug report messages)
Download link
Asus_pre_beta
P.S. if you want to speed up this process, try to fix sound or touchpanel with fingerprint
Click to expand...
Click to collapse
Sorry i'm not more active, this is because I have limited internet data , however I can recommend this thread to other people I think might find this useful

markus_ll said:
P.S. if you want to speed up this process, try to fix sound or touchpanel with fingerprint
Click to expand...
Click to collapse
Where would you recommend to begin doing that?

Benderisas said:
Where would you recommend to begin doing that?
Click to expand...
Click to collapse
check boot.img first of all. i think i made all, but i can mistake. after check /bin -> libs -> /etc -> /vendor -> /framework

All works are stopped, because i changed phone. Good luck guys!

markus_ll said:
All works are stopped, because i changed phone. Good luck guys!
Click to expand...
Click to collapse
Oh maan.. you were my only hope!

[ROM][11.0][Discontinued] Yet another AOSP project [Mi A1 Tissot][ALPHA]

Who are we?​YAAP is a project founded by Adhitya Mohan (@poad42) and Ido Ben-Hur (@idoybh) with the goal of staying close to AOSP in design goals, offer a clean interface, do as much as original development as possible and avoid becoming a kitchen sink and cherry picked mess.
Bug reporting:​
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab dmesg . (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Downloads​Mi A1​Flashing Procedure​Install Latest Custom Recovery (This is recommended)
Coming from a different rom / OS you'll need to clean flash:
1. Wipe data (Factory reset)
(1.1.) If coming from stock OS you may need to format internal storage
2. Flash rom
(2.1.) After Flashing rom Flash Twrp (dont reboot without installing it)
(2.2)After Flashing Twrp go back to main menu and go to Reboot menu and select Reboot to Recovery Again
(2.2)Flash Gapps (This Recommended) For Root We Suggest Use Magisk Canay Builds (check below for download link)
3. Rejoice
For dirty flash just skip step 1, 1.1
and possibly 2.1 if your mods support addon.d (ex: Magisk)
It does not matter when you flash the firmware zip, and you only need to flash it once per firmware version
XDA:DevDB Information
Yet another AOSP project, ROM for the Mi A1
Contributors
murtaza1326
Source Code: [url]https://github.com/yaap[/URL]
Device Tree: [url]https://github.com/yaap/device_xiaomi_tissot[/URL]
Common Device Tree: [url]https://github.com/yaap/device_xiaomi_msm8953-common[/URL]
Vendor Tree: [url]https://github.com/yaap/vendor_xiaomi[/URL]
Kernel Source Code: [url]https://github.com/yaap/kernel_xiaomi_tissot[/URL]
ROM OS Version: Android 11
ROM Kernel: Linux 4.x
ROM Firmware Required: v10.0.24.0 (Pie) (August)
Based On: AOSP
Version Information
Status: Alpha
Created 2020-09-20
Last Updated 2020-10-06

Working:
Camera/Video/Mic
Fingerprint
GPS
IMS (VoLTE)
RIL
Video playback
Wi-Fi
NightLight
CTS
Broken:
WFD
Bubbles
Switching back to wifi after using hotspot
(need to reboot to use wifi again)
Note: The ROM Does Not Include Gapps Feel Free to flash any gapps of your likings Nik Gapps are Recommended
For Root Magisk Canary Build(Compatible with R Only) is Working Fine This Works Perfectly (Do Not Update it)
Here
Credits Section
I am not alone to bring it up to you guys alone there are many many and many people who helped me to achive this
and i would like to mention them
First I would like to thanks
@abhinavagrd_1129 even tho me and him started bringing up trees differently he was always there to guide me
& i would like to tell you that his Aosp Beta 3 Rom Inspired me to try to bringup trees
@poad42 (Our Lead Dev of Project Yaap is the one who helped me alot to fix many bugs including the lags we were facing he pointed out fix to me
@SagarMakhar he is the one who fixed my noobish mistake i made everytime (also helped me to fix ril in the previous version)
@gotenksIN a guy who also stucked with his own bringup as well i was, we disscussed about bugs and different things together
@shivatejapeddi thanks to him VNDK29 issues were solved
@Lostark13 pointing and hinting me out for diffrent smaller things
Vince Device Devs (i picked there fixes thanks alot guys )
my mates in tissot maintainer TG group
also my testers ( i uslly do my own testing but at some point they helped me to too thanks alot guys)
if i miss anyone from the list do let me know :laugh:

New Changelogs :-
Code:
Device Side:-
Enforcing Now
CTS Passes Without Root(Tissot FP No More Pixel Props)
Fixed USB Teathering
Source Side:-
Merged Latest ASB (October)patch r5
Added Q/S Customisations
Added Clocks In Styles & wallpaper app
Added DT2W & DT2Sleep Gestures
Added Brightness Slider Customization
Added Custom Footer Text Support
Old Changelogs :-
Code:
Fixed Night Light
Fixed 3rd Party Apps Not Detecting Fingerprint
Fixed Wifi & Wifi Hotspot Toogle
Fixed CTS (With Root (No More Pixel Props Needed))
Xiaomi Parts Removed Vibration Controls Completly
Xiaomi Parts (New Adaptive Icons will match other android R icons)
Source side features will be added soon

Piru?
Congratulations ??

Harvey_Spectar said:
Piru
Congratulations ??
Click to expand...
Click to collapse
tnq sar

Good to See on 11 too..

Weww.. A11 going lit ??

Pro!!!! Nice work bruh!

Gawd
Sent from my Mi A1 using Tapatalk

What is the mean of "ROM Firmware Required: 10.0.24 (August)"?
Where can I found the ROM firmware?
There is some " must" to install it?
I am sorry if these are silly questions

sergiobh said:
What is the mean of "ROM Firmware Required: 10.0.24 (August)"?
Where can I found the ROM firmware?
There is some " must" to install it?
I am sorry if these are silly questions
Click to expand...
Click to collapse
sorry for inconvenience updated info
edit: i have added links for required firmware there shouldnt be a issue to find it somewhere else

Hi, @murtaza1326, thanks for your great work!
Nice to see that you're working on 11
I flashed YAAP and I found that fingerprint sensor is getting harder to detect fingertips (much less sensible, perhaps?).
Also, I see that if I just flash or update Official Magisk Canary, after device reboots, it goes to Fastboot mode and never boots System. I found that a solution was flashing that "MagiskR" zip, found at the other Android 11 ROM, but once installed, I have to avoid updates... otherwise, problem will appear.

?

KaaMyA said:
Hi, @murtaza1326, thanks for your great work!
Nice to see that you're working on 11
I flashed YAAP and I found that fingerprint sensor is getting harder to detect fingertips (much less sensible, perhaps?).
Also, I see that if I just flash or update Official Magisk Canary, after device reboots, it goes to Fastboot mode and never boots System. I found that a solution was flashing that "MagiskR" zip, found at the other Android 11 ROM, but once installed, I have to avoid updates... otherwise, problem will appear.
Click to expand...
Click to collapse
it could be different sensor like fpc ? i will see and i will fix it thanks for informing about magisk

KaaMyA said:
Hi, @murtaza1326, thanks for your great work!
Nice to see that you're working on 11
I flashed YAAP and I found that fingerprint sensor is getting harder to detect fingertips (much less sensible, perhaps?).
Also, I see that if I just flash or update Official Magisk Canary, after device reboots, it goes to Fastboot mode and never boots System. I found that a solution was flashing that "MagiskR" zip, found at the other Android 11 ROM, but once installed, I have to avoid updates... otherwise, problem will appear.
Click to expand...
Click to collapse
i need more details on your sensor type if you can provide me
check this screenshot it has Fingerprint model stated that can you tell us what it shows there for you because as far as i and my tester tested this has blazing fast Fingerprint sensor

murtaza1326 said:
i need more details on your sensor type if you can provide me
check this screenshot it has Fingerprint model stated that can you tell us what it shows there for you because as far as i and my tester tested this has blazing fast Fingerprint sensor
Click to expand...
Click to collapse
Friend, your screenshot seems to have been deleted
Well, while that, all I could tell is I'm coming from DerpFest, I have changed back to that ROM because I need to use my phone everyday. In that ROM fingerprint if easier to detect fingerprints.

murtaza1326 said:
i need more details on your sensor type if you can provide me
check this screenshot it has Fingerprint model stated that can you tell us what it shows there for you because as far as i and my tester tested this has blazing fast Fingerprint sensor
Click to expand...
Click to collapse
Hello prosur!
KaaMyA said:
Friend, your screenshot seems to have been deleted
Well, while that, all I could tell is I'm coming from DerpFest, I have changed back to that ROM because I need to use my phone everyday. In that ROM fingerprint if easier to detect fingerprints.
Click to expand...
Click to collapse
You can still check which fingerprint sensor your device have

Takeshiro04 said:
You can still check which fingerprint sensor your device have
Click to expand...
Click to collapse
Don't know how. Screenshot would have helped me, but was deleted. Please tell me how to check that.

KaaMyA said:
Don't know how. Screenshot would have helped me, but was deleted. Please tell me how to check that.
Click to expand...
Click to collapse
Install Device info apk and check the fingerprint sensor

murtaza1326 said:
i need more details on your sensor type if you can provide me
Click to expand...
Click to collapse
Mr Magneto said:
Install Device info apk and check the fingerprint sensor
Click to expand...
Click to collapse
I have installed "Device Info HW" app and it tells that my sensor variant is "goodix".