Related
Hello, everyone!
TL;DR: You're about to perform a systemless root installation on your phone so make sure you have uninstalled Xposed Framework, uninstalled root, the device's bootloader is unlocked and your phone's boot image is in its untouched stock state. Then boot into TWRP and install SuperSU-v.279-SR3 or newer.
UPDATE 2017-01-19:
- Provided missing bootloader information regarding root. Thanks, @Charlita for the heads-up!
- Moved TL;DR section to the top.
UPDATE 2017-01-15:
- SuperSU-v.279-SR3 learned how to use systemless mode as default flashing method for Motos. This is great news as the installation process now is just a matter of flashing the SuperSU installer. The segmentation fault had been fixed on SR2 and this version also includes that fix.
- Included a TL;DR section.
UPDATE 2016-12-25:
- SuperSU-v.279-SR1 contains a regression bug regarding the "segmentation fault". Skip this version for now. I've already contacted Chainfire.
- suhide: as the Chainfire himself stated, the tool is a losing game so I'm not putting any further effort here.
UPDATE 2016-11-03:
- As of SuperSU-v2.78-SR3 boot image patching works out-of-the-box. Just install it and you're done!
- TWRP version 3.x works as expected.
- Unfortunately, SafetyNet checking fails as Google constantly updates the server-side code.
- WIP: Check if Chainfire's suhide are able to help here.
UPDATE 2016-08-08:
- Added a backup reminder.
- Added flashable zip systemless_root_enabler_by_glauberlima.zip.
After a few days playing with it, I finally managed to perform a systemless root install for our beloved Moto X 2014
Benefits:
- Install OTA updates when they arrive;
- SafetyNet checking will pass so Android Pay can be used (not available in Brazil yet).
Requirements (links below) :
- Android 6 Marshmallow
- Bootloader must be unlocked otherwise you won't be able to root your phone;
- Boot partition must be in its original untouched stock state otherwise, SuperSU installer won't be able to patch it;
- System partition must be untouched as well but a simple uninstall of applications that have changed it should be enough. This step is not mandatory but if your system partition remains changed SafetyNet checking will fail;
- Your device must be unrooted. SuperSU has the option "Completly remove root". Use it;
- If you have Xposed Framework installed, uninstall it;
- You'll need ADB and Fastboot in order to flash stock boot.img if applicable;
- TWRP. Version 3.0.2-2 works just fine. If you prefer 2x series, I highly recommend version 2.8.7.1;
- SuperSU-v2.79-SR3 zip installer (or a newer version). DO NOT TRY AN OLDER VERSION. WILL NOT WORK;
Install guide:
- Make a Nandroid backup first using TWRP;
- Uninstall Xposed Framework if applicable;
- Uninstall SuperSU;
- Connect your device to your computer via USB;
- Reboot into bootloader:
Code:
adb reboot-bootloader
- Restore stock boot partition (you can skip this step if you already been on stock boot):
Code:
fastboot flash boot xt1097_boot_stock_with_may_2016_update.img
VERY IMPORTANT: The binary file boot xt1097_boot_stock_with_may_2016_update.img is device dependent. I have extracted stock boot.img from victara May 2016 update full ROM package and put it here. If you are trying on the other variants, make sure you will use the right image.
- Reboot into Recovery (TWRP);
- Flash the attached zip file systemless_root_enabler_by_glauberlima.zip. This will set both variables SYSTEMLESS=true and BINDSYSTEMXBIN=false. Without these variables set, SuperSU will fail to systemless root the device. Feel free if you want to manually enter the commands in the Command Prompt:
Code:
adb shell "echo SYSTEMLESS=true>/data/.supersu"
adb shell "echo BINDSYSTEMXBIN=false>>/data/.supersu"
- Install SuperSU and reboot system. If the first boot fails, just wait - the second will work I promise you!
- As soon as Android UI shows up you should be systemless rooted;
- Confirm SuperSU is installed by recognizing the green icon on your app drawer;
- Open up any root app you have. The world-famous Superuser permission request dialog should pop-up;
- Install SafetyNet Helper, in order to attest your Android, is passing Google's SafetyNet checking: https://play.google.com/store/apps/details?id=com.scottyab.safetynet.sample
Now you should be good. Congrats!
Go ahead and get some systemless apps:
- Systemless Xposed Framework
- Systemless Adaway
This procedure should work for the other variants too - all you need is the original boot.img
If you need any help feel free to ask.
Attached you can find the screenshots taken from my XT1097 after the procedure
Related links:
SuperSU-v2.79-SR3:
https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip
Latest stable SuperSU:
http://download.chainfire.eu/supersu-stable
Systemless Xposed Framework:
http://forum.xda-developers.com/xposed/unofficial-systemless-xposed-t3388268
Systemless AdAway:
http://forum.xda-developers.com/showthread.php?t=2190753
Material Design Xposed Installer:
http://forum.xda-developers.com/xposed/material-design-xposed-installer-t3137758
Minimal ADB and Fastboot:
http://forum.xda-developers.com/showthread.php?t=2317790
TWRP for Moto X 2014:
http://forum.xda-developers.com/mot...recovery-twrp-2-8-0-0-touch-recovery-t2911523
Thanks:
@Chainfire
Even if I am on stock I have to flash boot*.img?
Sent from my XT1097 using Tapatalk
rtrotsky said:
Even if I am on stock I have to flash boot*.img?
Sent from my XT1097 using Tapatalk
Click to expand...
Click to collapse
Since your device already has the untouched stock boot you don't need to flash anything.
I seem to be having trouble installing the "Systemless Xposed". It errors out with - ! Failed: Unable to extract zip file!
I have verified "systemless root - ver 2.76" and tried re-downloading the zip. Any thoughts?
jbaumert said:
I seem to be having trouble installing the "Systemless Xposed". It errors out with - ! Failed: Unable to extract zip file!
I have verified "systemless root - ver 2.76" and tried re-downloading the zip. Any thoughts?
Click to expand...
Click to collapse
Could you provide your recovery.log from TWRP so we can see the detailed logging information?
You can pull it from your device by running the following command in command prompt:
Code:
adb shell cat /tmp/recovery.log | clip
This will copy recovery.log contents to the clipboard. Paste it into notepad then save and attach here.
glauberlima said:
Could you provide your recovery.log from TWRP?
You can pull it from your device by running the following command in command prompt:
Code:
adb shell cat /tmp/recovery.log | clip[code]
This will copy contents to the clipboard. Paste it in notepad then save and attach here.[/QUOTE]
This is pretty neat. Given what I read as the requirements am I correct this only works with stock ROM? (and test will only pass on stock).
Click to expand...
Click to collapse
vpxf said:
This is pretty neat. Given what I read as the requirements am I correct this only works with stock ROM? (and test will only pass on stock).
Click to expand...
Click to collapse
Hi @vpxf
The unmodified boot.img is a requirement for SuperSU as it tries to patch the boot image on-the-fly during the install process (by the time you flash it using TWRP). If the image is not in its original state, SuperSU will fail to install in systemless mode.
Regarding your question about custom ROMs compatibility I don't know if the SafetyNet checking will pass/fail. That's a good test to perform.
glauberlima said:
Could you provide your recovery.log from TWRP so we can see the detailed logging information?
You can pull it from your device by running the following command in command prompt:
Code:
adb shell cat /tmp/recovery.log | clip
This will copy recovery.log contents to the clipboard. Paste it into notepad then save and attach here.
Click to expand...
Click to collapse
I've attached the log. I did notice "unzip: zip flags 1 and 8 are not supported".
NOTE: I was able to flash the 85.7 version found in the second post of the "Systemless Xposed" thread. The newest 86.2 is the one giving me troubles.
As glauberlima found out in the other thread, you need to re-zip the xposed installer with 7-zip (that's what i used at least) and the install will work.
bertolehm said:
As glauberlima found out in the other thread, you need to re-zip the xposed installer with 7-zip (that's what i used at least) and the install will work.
Click to expand...
Click to collapse
jbaumert said:
I've attached the log. I did notice "unzip: zip flags 1 and 8 are not supported".
NOTE: I was able to flash the 85.7 version found in the second post of the "Systemless Xposed" thread. The newest 86.2 is the one giving me troubles.
Click to expand...
Click to collapse
As stated by @bertolehm I've discussed in the other posts the exactly same issue with the zip installer you have reported @jbaumert. Take a look at them:
http://forum.xda-developers.com/showpost.php?p=67792193&postcount=1193
http://forum.xda-developers.com/showpost.php?p=67805517&postcount=1233
Regarding your device being systemless rooted check with SafetyNet Helper Sample app. If everything turns green you are good
** Duplicated **
Thanks for the tutorial.
The first boot fails, ok ; but how long is the second boot ?
I wait a long time (around 15 minutes) blocked at the first screent (static moto logo) and I stop it, reboot and reinstall my backup. I panic a little
oyoyl said:
Thanks for the tutorial.
The first boot fails, ok ; but how long is the second boot ?
I wait a long time (around 15 minutes) blocked at the first screent (static moto logo) and I stop it, reboot and reinstall my backup. I panic a little
Click to expand...
Click to collapse
Which variant is your X?
glauberlima said:
Which variant is your X?
Click to expand...
Click to collapse
XT1092
oyoyl said:
XT1092
Click to expand...
Click to collapse
15 minutes... That's definitely too much.
I'm about to update this guide with my new findings so If you don't mind I'd like to suggest you this:
Repeat the steps but this time skip the update to latest version. After the reboot access SuperSU. It should display a message regarding your su needs update. Accept it.
Make sure your nandroid backup is up to date.
Same thing, but it's possible that my boot image is not up to date and I have no other boot backup to test.
I have only a complete backup (boot + system without root), perahps I'll try later with complete restore ...
Thanks
Something went wrong, the root works fine, but when I run the SafetyNet test, I got "CTS profile match: false", I just want to keep the OTA upgrades working, if I did something wrong, is there any way to unroot and do the systemless root again?? Thankss
Hi! Hey, I followed the steps and my MotoX got stuck when rebooting after flashing. I'm trying to enter fastboot with power+Volume down but no luck so far, any idea? I hope you can help me!
oyoyl said:
Same thing, but it's possible that my boot image is not up to date and I have no other boot backup to test.
I have only a complete backup (boot + system without root), perahps I'll try later with complete restore ...
Thanks
Click to expand...
Click to collapse
OK. Just leave a reply by the time you have the result of your test.
guilhermoaraujo said:
Something went wrong, the root works fine, but when I run the SafetyNet test, I got "CTS profile match: false", I just want to keep the OTA upgrades working, if I did something wrong, is there any way to unroot and do the systemless root again?? Thankss
Click to expand...
Click to collapse
One of your installed apps modified system partition. Did you test on a completly stock image?
Hi to all
I have rooted OP3T and every time when I install new update, BETA small or full version zip file, I need again to install stock.zip from boatloader , then again, install TWRP and Super Su.
I hear that with Magisk I can easy install any update without lost TWRP and Root. I have flash Magisk and install from Google Store Magisk Manager.
So my question is how to install new update with Magisk and dont lost TWRP and Root?
Please tell me step by step
thx a lot for your answers
Magisk doesn't touch the recovery. And you'll still have to flash the Magisk zip since the boot image is updated whenever you update your system (Magisk modifies the boot image).
What does stay after an update (as long as you don't wipe /data) is any Magisk modules that you have installed. If you have a bunch of modules that change build.prop values, debloat system apps, change screen density, replaces system UI sounds, etc, you won't have to do those changes again after an update. They are found in the Magisk image in /data and will be loaded by Magisk at boot.
Even if you've wiped /data, it's just a matter of flashing the Magisk and module zips in TWRP after updating your system. No tedious manual editing of build.prop or deleting apps, etc. It literally takes seconds...
If you have issues with loosing TWRP after an update, you can easily fix that, right after updating. Just keep a copy of the recovery image on your device and flash it in TWRP.
I recently got a Pixel 2 XL and have been using Magisk right away. Because of the nuisance of updating I didn't update much in the past on my 6P with Magisk. On this device I'm determined to stay as up to date as possible when it comes to OTAs. I didn't have luck taking the January OTA using the recommended method on the Magisk site and I found many different methods. I decided this method was the most straightforward method for me. I'm sure others are already doing this, but I wanted to post my method of updating the device while keeping TWRP and Magisk.
-Make sure you have installed the platform-tools properly
-Download the desired FULL image from https://developers.google.com/android/images and extract the ZIP somewhere
-***IMPORTANT: REMOVE '-w' from the 'fastboot update' line in the flash-all.bat (this will stop it from wiping the device)
-Remove 'exit' from flash-all.bat
-Make sure you have already downloaded the latest Magisk ZIP (should be under '/sdcard/MagiskManager', ex. 'Magisk-v15.2.zip')
-Power off device
-Boot the device into fastboot (power + down)
-Run flash-all.bat
-Let phone boot into the OS
-Power off
-Boot the device into fastboot (power + down)
-Install TWRP (using instructions from https://twrp.me/Devices/Google/)
-fastboot boot *TWRP.img path*
-adb push *TWRP.zip path* /
-Install twrp.zip via TWRP interface​-While still booted in TWRP, install Magisk ZIP via TWRP interface (ex. '/sdcard/MagiskManager/Magisk-v15.2.zip')
-Wipe cache/dalvik
-Reboot
You don't even need TWRP to take the OTA, Magisk has a built in way to take OTAs and still retain magisk.
Neverendingxsin said:
You don't even need TWRP to take the OTA, Magisk has a built in way to take OTAs and still retain magisk.
Click to expand...
Click to collapse
The reference to TWRP wasn't meant to imply that TWRP is required. I was just stating the easiest method that I used for a user who has a Pixel 2 device with Magisk AND TWRP. I was unable to take the OTA with Magisk after following the instructions on https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md and that it is why I went this route.
Simple and straightforward, thanks mate! I'll give it a try.
Of course being an OTA it keeps all my stuff after I remove "-w" right?
Finally got around to trying this, it worked great!
hey mate i used these instructions to install the May OTA on my Pixel 1 and worked a treat. I would add at the start to remove any substratum overlays if used.
Also I uninstalled magisk before the process but not sure if you need to?
p.p.s. can a git please message this guy to re-test or remove his instructions here because there's multiple reports that they don't work!
https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md
gfunkzero said:
hey mate i used these instructions to install the May OTA on my Pixel 1 and worked a treat. I would add at the start to remove any substratum overlays if used.
Also I uninstalled magisk before the process but not sure if you need to?
p.p.s. can a git please message this guy to re-test or remove his instructions here because there's multiple reports that they don't work!
https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md
Click to expand...
Click to collapse
Shouldn't have to remove anything because you are doing a full flash of the stock OS. It will just overwrite anything that is there.
Hello everybody.
I've read that 18.1 supports 4.2+ so I've tried to install in two MTK6589T devices I've. One running 4.2, the other running 4.4
CMW/TWRP gave an error mounting system, so I mounted system manually and it started flashing. Firstly it detected old root installed and disabled the old root. But when it tried to find the boot, installation was aborted because installator claims cannot find the boot on both phones.
Then I though, okay, lets reboot back to android, I will try to install a few days later, maybe its buggy now, but both phones cannot boot.
I can easily fix them by flashing rom again I guess, but I would like to know where's the issue and also post it for more people could face the same problem.
Any idea where's the problem/how to fix without rom reflashing? I've tried magisk uninstaller but after mounting system in recovery it is also giving error.
Thanks
UPDATE: For now, if no other solution is found, bootloop can be bypassed by dirty installing the rom again. But it has to be an easier workaround...
We know now that the problem is caused because of two factors merging:
1- Using Magisk.zip installer through custom recovery
2-In the case that the custom recovery CMW/TWRP installed in the phone is very old (for instance, CMW automade for MTK6589X or TWRP 2.5.0).
While installing, Magisk tries to send commands to the custom recovery that cant be understood by it, leaving the installation incomplete after some modifications in /system (read below recovery log).
Acording to the recovery, it seems that Magisk did some modifications without running correctly survival script - Adding addon.d survival script ("Unrecognized option '-Xnodex2oat'") and .zip installer is not designed to revert actions in this case.
Also, Magisk couldn't reach the boot modification step, so boot is not damaged, therefore workarounds for restoring boot won't work.
Using Magisk Unistaller.zip is also not possible as the uninstaller is mainly designed for boot backup restoration, and again, this is not the case.
Currently needed: Find what's wrong in system due to the incomplete Magisk installation to revert it back to the original state (before faulty magisk.zip installation).
Recovery log:
************************
* Magisk v18.1 Installer
************************
- Mounting /system, /vendor
- Target image: /dev/bootimg
- Device platform: arm
- Removing system installed root
- Constructing environment
- Adding addon.d survival script
Unrecognized option '-Xnodex2oat'
up!
I' also having the same problem. My Samsung J2 Prime stuck at logo after updating to 18.1. Any tips on how to fix it without resetting my phone? Thanks.
Update: Bootloop fixed. I used TWRP to restore boot image. I then update Magisk by flashing zip file from TWRP. Everything went back to normal. Hope this help.
trol_sg said:
Hello everybody.
I've read that 18.1 supports 4.2+ so I've tried to install in two MTK6589T devices I've. One running 4.2, the other running 4.4
CMW/TWRP gave an error mounting system, so I mounted system manually and it started flashing. Firstly it detected old root installed and disabled the old root. But when it tried to find the boot, installation was aborted because installator claims cannot find the boot on both phones.
Then I though, okay, lets reboot back to android, I will try to install a few days later, maybe its buggy now, but both phones cannot boot.
I can easily fix them by flashing rom again I guess, but I would like to know where's the issue and also post it for more people could face the same problem.
Any idea where's the problem/how to fix without rom reflashing? I've tried magisk uninstaller but after mounting system in recovery it is also giving error.
Thanks
Click to expand...
Click to collapse
If you have a backup of your boot image, you can just restore it using TWRP. But in case that you have no backup of boot image, you can try to get boot image from the internet and restoring using it. In my case, this is what I did.
1. Go to TWRP and then make backup of boot image of the faulty phone*. (Folder 1)
2. I used another J2 prime to create a boot image backup. (Folder 2)
3. Once that is done, copy and replace the files inside the Folder 2 into Folder 1.
4. Reboot to TWRP again then use that to restore the boot image on my stuck J2.
Tips: make backup in SD card so you can easily swap it in between the bad and good phone.
*This is to create a folder of the backup file. I did tried to directly copy and paste the backup boot image file from another good phone but TWRP didn't detect it. So this is the workaround that I come with. And it worked for me.
Thanks for your answer but I doubt your case is mine. Your device is much newer than mine and according to your comment, you've sucesfully installed previous version of Magisk without issues. This is not a problem while updating, as Magisk v. earlier than 18.1 was not compatible with android 4.2+. I think Magisk is not compatible with MT6589T even if they run 4.2 or 4.4.
I think that it cannot be a boot problem as TWRP/CWM displayed msg 'Boot cannot be found' while installing Magisk, so that I don't think boot was replaced or modified in any ways. Moreover, the bootloop is not in the boot loading, as phone can pass boot image without any problem, but it is stuck in android loading image. I'm thinking in some script or root modification that Magisk did before trying to unpack the boot, however I'm not that deep into the Magisk install to find the proper workaround.
I can restore boot backup and also I can take boot file from the original rom and flash, because in Mediatek-based devices, boot.img is inside de zip, but I dont think it will solve the problem. Anyhow I'll get back ASAP with the answer.
Any more ideas??
Nothing, boot/uboot restoration or flashing again just the boot won't fix the problem, so it's something that Magisk installator touch in /system or /data I guess, but what?
trol_sg said:
Nothing, boot/uboot restoration or flashing again just the boot won't fix the problem, so it's something that Magisk installator touch in /system or /data I guess, but what?
Click to expand...
Click to collapse
Have you read/tried this?
didgeridoohan(dot)com/magisk/MagiskIssues
Ato09 said:
Have you read/tried this?
didgeridoohan(dot)com/magisk/MagiskIssues
Click to expand...
Click to collapse
Yes, I've read them before I made the post. I've also looked for a solution in some of the threads and using search, but couldn't find a way.
Here I attach recovery.log if someone is interested to see the detailed problem.
Also, here below I attach the lines concerning the installation. All other is uninstallation tries and so on:
************************
* Magisk v18.1 Installer
************************
- Mounting /system, /vendor
- Target image: /dev/bootimg
- Device platform: arm
- Removing system installed root
- Constructing environment
- Adding addon.d survival script
Unrecognized option '-Xnodex2oat'
dalvikvm: [options] class [argument ...]
dalvikvm: [options] -jar file.jar [argument ...]
The following standard options are recognized:
-classpath classpath
-Dproperty=value
-verbose:tag ('gc', 'jni', or 'class')
-ea[:<package name>... |:<class name>]
-da[:<package name>... |:<class name>]
(-enableassertions, -disableassertions)
-esa
-dsa
(-enablesystemassertions, -disablesystemassertions)
-showversion
-help
The following extended options are recognized:
-Xrunjdwp:<options>
-Xbootclasspath:bootclasspath
-Xcheck:tag (e.g. 'jni')
-XmsN (min heap, must be multiple of 1K, >= 1MB)
-XmxN (max heap, must be multiple of 1K, >= 2MB)
-XssN (stack size, >= 1KB, <= 256KB)
-Xverify:{none,remote,all}
-Xrs
-Xint (extended to accept 'ortable', ':fast' and ':jit')
These are unique to Dalvik:
-Xzygote
-Xdexopt:{none,verified,all,full}
-Xnoquithandler
-Xjniopts:{warnonly,forcecopy}
-Xjnitrace:substring (eg NativeClass or nativeMethod)
-Xstacktracefile:<filename>
-Xgc:[no]precise
-Xgc:[no]preverify
-Xgc:[no]postverify
-Xgc:[no]concurrent
-Xgc:[no]verifycardtable
-XX:+DisableExplicitGC
-X[no]genregmap
-Xverifyopt:[no]checkmon
-Xcheckdexsum
-Xincludeselectedop
-Xjitop:hexopvalue[-endvalue][,hexopvalue[-endvalue]]*
-Xincludeselectedmethod
-Xjitthreshold:decimalvalue
-Xjitcodecachesize:decimalvalueofkbytes
-Xjitblocking
-Xjitmethod:signature[,signature]* (eg Ljava/lang/String\;replace)
-Xjitclass:classname[,classname]*
-Xjitoffsetffset[,offset]
-Xjitconfig:filename
-Xjitcheckcg
-Xjitverbose
-Xjitprofile
-Xjitdisableopt
-Xjitsuspendpoll
Configured with: debugger profiler hprof jit(armv7-a-neon) smp show_exception=1
Failed to initialize runtime (check log for details)
- Unpacking boot image
MagiskBoot v18.1(18100) (by topjohnwu) - Boot Image Modification Tool
Parsing boot image: [/dev/bootimg]
No boot image magic found!
! Unable to unpack boot image
- Unmounting partitions
E:Error executing updater binary in zip '/sdcard/Magisk-v18.1.zip'
Error flashing zip '/sdcard/Magisk-v18.1.zip'
@trol_sg I'm gonna guess it's got to do with the absolutely ancient TWRP you're using. It just can't handle everything that the Magisk installation script is trying to do...
Your best bet (if Magisk will work at all on your device) is to patch the boot image with the Magisk Manager and then flash the patched image manually. There are new and shiny installation instructions available here: https://topjohnwu.github.io/Magisk/
Didgeridoohan said:
@trol_sg I'm gonna guess it's got to do with the absolutely ancient TWRP you're using. It just can't handle everything that the Magisk installation script is trying to do...
Your best bet (if Magisk will work at all on your device) is to patch the boot image with the Magisk Manager and then flash the patched image manually. There are new and shiny installation instructions available here: https://topjohnwu.github.io/Magisk/
Click to expand...
Click to collapse
Thank you so much for your answer. So it's the recovery, but can't find newer ones, sadly. Too old phones I know, but just curious if I could make Magisk working on them, lol.
I was going into the boot modification manually right now, but in order to patch the boot I need manager installed first, and phone couldn't boot so I did dirty flash of the rom to be able to boot into it again.
Lets see what happens then. I'll be right back.
Anyhow, this is not a solution to fix the problem of bootloop that I am requesting help in case someone could face the same and did not make a backup of the phone and didn't want to make dirty re-flash. Any idea?
Update: After I did dirty flash of the rom, and now Jiayu g3s android 4.4 booted.
UPDATE: So, after patching manually boot and installing (using restore in TWRP 2.5 as image flash is not yet implemented AFAIK), phone booted and yes Magisk is working.
Magisk installation .zip through a very old recovery is making the bootloop. So that, a thing learnt now.
But, for other people facing this bootloop, can we do a research to find what magisk.zip did to the phones to leave them in bootloop? Maybe we can revert without rom flashing easily if we knew what's the issue...
Thanks in advance!
Doing a bit more tests I found that magisk.zip did something in /system so that it is left in bootloop, but still no idea why/whats causing that...
There are delay complete boot like 4 5 second in j7 prime. I didn't love this version
any more help?? up!!
trol_sg said:
Yes, I've read them before I made the post. I've also looked for a solution in some of the threads and using search, but couldn't find a way.
Click to expand...
Click to collapse
Try this.
Quote:
Originally Posted by void74
I faced this problem too this morning.
I have a Redmi Note 5 with AOSiP ROM, I don't know if it's the right way to do it, but I solved the bootloop problem this way:
- volume up and then boot to TWRP
- copied magisk uninstall to phone memory
- installed magisk uninstall
- rebooted in fastboot/bootloader mode
- flashed original boot.img extracted from stock image zip file ("fastboot flash boot boot.img")
- rebooted to TWRP
- installed magisk 17.0 zip file
- rebooted to system, all OK!
Only problem is that I lost previous magisk configuration, but it's a snap to reconfigure it!
Quote:
Originally Posted by Mangraviti
Here is what to do, if you HAVE NOT installed the new version:
1) Do not update via Magisk Manager.
2) Do not update via TWRP using the zip you can download via Magisk Manager.
3) Uninstall Magisk using Magisk uninstaller (ZIP).
4) Boot to Android.
5) Reboot to TWRP
6) Install V17 ZIP via TWRP and boot to Android.
If you HAVE INSTALLED and got a bootloop:
1) Download the uninstaller ZIP.
2) Enter TWRP during the bootloop.
3) Uninstall using the uninstaller ZIP.
4) Boot to Android.
5) Download V17.
6) Reboot to TWRP and flash the V17.
7) Boot to Android it it should be working.
-------------
Original post. https://forum.xda-developers.com/apps/magisk/bootloop-magisk-update-t3836904
Hope it help.
Ato09 said:
Try this.
Quote:
Originally Posted by void74
I faced this problem too this morning.
I have a Redmi Note 5 with AOSiP ROM, I don't know if it's the right way to do it, but I solved the bootloop problem this way:
- volume up and then boot to TWRP
- copied magisk uninstall to phone memory
- installed magisk uninstall
- rebooted in fastboot/bootloader mode
- flashed original boot.img extracted from stock image zip file ("fastboot flash boot boot.img")
- rebooted to TWRP
- installed magisk 17.0 zip file
- rebooted to system, all OK!
Only problem is that I lost previous magisk configuration, but it's a snap to reconfigure it!
Quote:
Originally Posted by Mangraviti
Here is what to do, if you HAVE NOT installed the new version:
1) Do not update via Magisk Manager.
2) Do not update via TWRP using the zip you can download via Magisk Manager.
3) Uninstall Magisk using Magisk uninstaller (ZIP).
4) Boot to Android.
5) Reboot to TWRP
6) Install V17 ZIP via TWRP and boot to Android.
If you HAVE INSTALLED and got a bootloop:
1) Download the uninstaller ZIP.
2) Enter TWRP during the bootloop.
3) Uninstall using the uninstaller ZIP.
4) Boot to Android.
5) Download V17.
6) Reboot to TWRP and flash the V17.
7) Boot to Android it it should be working.
-------------
Original post. https://forum.xda-developers.com/apps/magisk/bootloop-magisk-update-t3836904
Hope it help.
Click to expand...
Click to collapse
Hello, thanks
This method won't work in my case as in the step:
- installed magisk uninstall = gives error
Note 5 is much newer phone with a recent recovery TWRP that allows all Magisk.zips commands, but unluckyly not this case.
Also, this method is for wrong boot installation/damaged boot. In my case what Magisk damage is /system, not boot.
I wish it could be boot, because that is very easy to fix (flashing through fastboot/SP Flash tools in the case of MTK, recovering boot twrp "backup" even if you didn't make backup...) as you mentioned.
Hope someone have a great idea to revert system to origin, then we could post the solution for those who would like to install Magisk in 4.2+ old phones, and instead of doing boot flash manually, they try to flash magisk.zip and they got bootloop.
Main post updated with all thread information. Up!
Nothing?? Up!!
trol_sg said:
Hope someone have a great idea to revert system to origin, then we could post the solution for those who would like to install Magisk in 4.2+ old phones, and instead of doing boot flash manually, they try to flash magisk.zip and they got bootloop.
Click to expand...
Click to collapse
The only part of the Magisk installation that actually touches /system is if it installs the addon.d survival script. The log you posted earlier shows that it's trying to do this, for some reason, and failiing. I'd start looking there...
Post my other thread for Android Oreo with OTA with TWRP ( https://forum.xda-developers.com/as...to/rom-update-stock-firmware-keeping-t3808269 ), wanted to continue the same but found pretty good solutions to have the process more quick and seamless.
So to have rooted Pie with TWRP and to flash OTA please follow below procedure.
Files needed,
Latest Pie full OTA file from Asus website.
Latest TWRP from here.
Decrypt File for Pie (recommedned).
Magisk (optional).
Debloat File (optional).
Steps to be followed to update to latest OTA,
Flash the latest TWRP and boot into it.
Flash downloaded full OTA package (point-1 above) from Asus website then reboot to recovery from TWRP menu.
Mount /system & /vendor partitions and flash decrypt-pie.zip file (point-2 above).
Reboot to recovery again, mount /system & /vendor and flash Magisk. (point-3 above)
Reboot to recovery and mount /system & /vendor and flash Debloat zip (point-4).
Finally reboot to system and HIT THANKS if it worked for you. This helps me and also gives confidence/credibility to others to try.
Post issues if any below.
It's not working bro
This ROM package works very well but cam2api is getting disabled. Did the build.prop method after root and also the fastboot method. It works for a few days than gcam stops.
As pointed out in the guide, official Pie zip is to be DL and flashed through TWRP. However, since it is official zip, will it flash successfully through TWRP recovery instead of Stock Recovery ?
Also, can anybody confirm if the phone is now system-as-root after upgrade to Pie ? (I am on v340 Oreo and system-as-root is not mandatory for devices upgrading to Pie).
Edit: Ok, so took the plunge and successfully updated from stock rooted v340 (Oreo) to v56 (Pie). Did everything as per the guide except for 2 steps:
1) Used TWRP flashable ROM instead of stock ROM zip.
2) Did not reboot to TWRP recovery after flashing updated recovery. Instead, continued through updated recovery, flashed ROM and then rebooted to recovery.
Bugs in the update v056 (Pie):
1) Sometimes "Recent Apps" list goes blank / stops working. Workaround: Reboot to safe mode and check "Recent Apps" (it usually is working), reboot to normal mode and everything works fine again.
2) Cam2Api breaks, even if you enable <persist.camera.HAL3.enabled=1> it will not work.
Add these lines to build.prop, save and reboot:
persist.camera.HAL3.enabled=1
persist.vendor.camera.HAL3.enabled=1
persist.camera.stats.test=5
persist.vendor.camera.test=5
persist.camera.eis.enable=1
(DO NOT FORGET to backup your original build.prop !)