[TWRP 3.0.2-1][ROOT] Samsung galaxy A9 pro SM-A910F/9100 - 26/7/2016 - Galaxy A3, A5, A7, A8, A9 Android Development

TWRP 3.0.2-1. for the Samsung Galaxy A9 pro SM-A910/9100 - Qualcomm MSM8976
Please note I don't own this device.
Stock Recovery is posted below if required.
NOTE:
FLASHING CUSTOM STUFF VOIDS YOUR WARRANTY. THIS WILL TRIP THE KNOX FLAG.
Install:
Boot to download mode.
Flash with Odin using the AP slot.
Uncheck Auto-reboot.
Reboot to recovery immediately after flashing using POWER + HOME + VOL DOWN, as soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
TWRP should now boot.
NOTE: ON SOME ANDROID 5.1.1 and 6.01 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
Install with ODIN:
twrp_3.0.2-1_sm-a910f_25716
Update 8/2/2017
Fixed build for latest firmware :
twrp_3.0.2-1_sm-a910_a9100_7217
Stock recovery:
A910FXXU1APFC_stock_recovery
IMPORTANT
At the moment TWRP isn't working with encryption, this means the DATA Partition and internal storage cannot be mounted.
To mount the Data partition encryption needs to be removed and the boot image patcher needs to be flashed below
This can be done via the FORMAT DATA button under the WIPE option in TWRP.
Please note this will erase all user data.
The boot image patcher can be flashed with TWRP.
The boot image patcher MUST be flashed before booting the device to system or the DATA partition will be re-encrypted at boot time.
BOOT IMAGE PATCHER
Boot image patcher to remove DM-verity and Forced encryption.
Instead of flashing one of the boot images above flash the zip below with TWRP.
This was built by jcadduono not me, so props to him, I just modified it to work for this device and to remove the SEANDROID ENFORCING message.
Steps:
1. BOOT TO TWRP
2. FORMAT DATA
3. FLASH SUPERSU
4. FLASH THE BOOT IMAGE PATCHER
5. REBOOT TO RECOVERY
6. CHECK DATA IS STILL MOUNTABLE
no-verity-no-encrypt_ashyx
TO ROOT
Flash the file below in twrp.
http://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip
FEEDBACK IS APPRECIATED PLEASE.
THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.

Reserved

Thanks mate
everything is working
---------- Post added at 12:49 ---------- Previous post was at 12:43 ----------
may you know how to do Custom Boot Splash for A9100 pro ?

Hi, I'm on firmware A9100ZCU1APD5 so these boot images wont work right. So now to be able to mount data, what I got is that I'll have to first wipe data in twrp and then flash the boot image patcher in order to get full access to twrp?

omar.abbas said:
Hi, I'm on firmware A9100ZCU1APD5 so these boot images wont work right. So now to be able to mount data, what I got is that I'll have to first wipe data in twrp and then flash the boot image patcher in order to get full access to twrp?
Click to expand...
Click to collapse
TWRP >BOOT IMAGE PATCHER >FORMAT DATA >SUPERSU
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU

ashyx said:
TWRP >BOOT IMAGE PATCHER >FORMAT DATA >SUPERSU
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
Click to expand...
Click to collapse
Thanks I'll try now and get back to you
Sent from my SM-A9100 using XDA-Developers mobile app

Wow thanks a lot it works. Dont have to change the language to English everytime I boot into recovery ? and can finally make backups. Thanks once again, you're the man!!
Sent from my SM-A9100 using XDA-Developers mobile app

Thanks, hope for more development.
Thanks for the development, not much out there for the A9100/A910f. Own a A9100(CH), which came without any Google apps and full of Chinese applications and region locked. Was able to load recovery and unencrypt boot, root, sideload Google apps. Is there a way to remove my region lock? Wish someone would develope the A910f international firmware to port over to the A9100. The A9 phone has some pretty impressive specs, hope for more development. Thank you.

gsnewport said:
Thanks for the development, not much out there for the A9100/A910f. Own a A9100(CH), which came without any Google apps and full of Chinese applications and region locked. Was able to load recovery and unencrypt boot, root, sideload Google apps. Is there a way to remove my region lock? Wish someone would develope the A910f international firmware to port over to the A9100. The A9 phone has some pretty impressive specs, hope for more development. Thank you.
Click to expand...
Click to collapse
By region lock you mean unable to flash with ODIN?
You can use FLASHFIRE to flash the stock firmware.
Sent from my SM-T280 using XDA-Developers mobile app

ashyx said:
By region lock you mean unable to flash with ODIN?
You can use FLASHFIRE to flash the stock firmware.
Sent from my SM-T280 using XDA-Developers mobile app
Click to expand...
Click to collapse
No, flashed recovery with Odin. I mean by region locked is the csc file is just for China and it's the only csc on the phone. So I'm seeing some Chinese in some of the stock apps still even though I changed the language to english. Location is working for me. But some of the apps still show Chinese

gsnewport said:
No, flashed recovery with Odin. I mean by region locked is the csc file is just for China and it's the only csc on the phone. So I'm seeing some Chinese in some of the stock apps still even though I changed the language to english. Location is working for me. But some of the apps still show Chinese
Click to expand...
Click to collapse
So what's actually stopping you from flashing another rom? Like I say you can use Flashfire.

Would like to stay stock Marshmallow 6.0.1. Tried to flash the rom for the A910f but if failed, same with the A9000(Android L). Both of these roms have multiple crc files for other regions. I think the failure is being caused by partition size. Didn't want to mess with for fear of bricking.

ashyx said:
So what's actually stopping you from flashing another rom? Like I say you can use Flashfire.
Click to expand...
Click to collapse
Have you tried it? Does it work? I tried using Odin but got some partition size errors and soft bricked my phone. So just need to make sure before I give Flashfire a go.
Sent from my SM-A9100 using XDA-Developers mobile app

So the actual failure to flash is the partition size, but which partition is failing?
More info needed here.
There are ways of adjusting the partition size on the device by simply flashing with the required PIT file.
Or the actual image itself can be resized to fit.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU

ashyx said:
So the actual failure to flash is the partition size, but which partition is failing?
More info needed here.
There are ways of adjusting the partition size on the device by simply flashing with the required PIT file.
Or the actual image itself can be resized to fit.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
Click to expand...
Click to collapse
I can't remember which partition size error it was as it was a few days ago. So do you know anyone who has done that on this phone successfully? Because if it is possible then thats all I'd want right now.
Sent from my SM-A9100 using XDA-Developers mobile app

omar.abbas said:
I can't remember which partition size error it was as it was a few days ago. So do you know anyone who has done that on this phone successfully? Because if it is possible then thats all I'd want right now.
Sent from my SM-A9100 using XDA-Developers mobile app
Click to expand...
Click to collapse
It is possible as I myself have done it with other devices.
If you can try the flash again with ODIN and then post the output log then we can find out which partition fails.
Just reflash your stock firmware after the failure.
By the way I don't own this particular device.
In the meantime I'm going to download the stock A9100 firmware and check the image sizes against the a910f firmware.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU

I tried to flash the A910F with Odin and It's give Auth fail on pitfile and stops there. I downloaded the firmware via samfirm 0.36 with binary to get the full 4 firmware files. Extract the pit file, point to it in Odin and BL, CSC, CP, AP in their slots and it always fail. Also does not work with flashfire with a single firmware file.
But now there is another way, I did it yesterday and works great. No Chinese! Credits to @dadimon29. You flash the full A9100 firmware but untick autoreboot. Once finished you boot back in download mode and flash @ashyx TWRP with Odin with no reboot. Reboot again to TWRP, flash the no-verity-no-encrypt_ashyx.zip, reboot again to twrp, now format data not wipe! Mount system and flash Supersu, your own CSC file and GPS.conf for your region and the GAPPS micro package. Now reboot to samsung and you will find everything is English or whatever language you prefer. And Google works out of the box, no permission errors. Now I can keep this phone!

steberg said:
I tried to flash the A910F with Odin and It's give Auth fail on pitfile and stops there. I downloaded the firmware via samfirm 0.36 with binary to get the full 4 firmware files. Extract the pit file, point to it in Odin and BL, CSC, CP, AP in their slots and it always fail. Also does not work with flashfire with a single firmware file.
But now there is another way, I did it yesterday and works great. No Chinese! Credits to @dadimon29. You flash the full A9100 firmware but untick autoreboot. Once finished you boot back in download mode and flash @ashyx TWRP with Odin with no reboot. Reboot again to TWRP, flash the no-verity-no-encrypt_ashyx.zip, reboot again to twrp, now format data not wipe! Mount system and flash Supersu, your own CSC file and GPS.conf for your region and the GAPPS micro package. Now reboot to samsung and you will find everything is English or whatever language you prefer. And Google works out of the box, no permission errors. Now I can keep this phone!
Click to expand...
Click to collapse
Could you tell me what firmware files you downloaded exactly? When you reboot your phone, does it show Galaxy A9 Pro in english? I'm still a little confused on the procedure too
Sent from my SM-A9100 using XDA-Developers mobile app

In order to get rid of the Chinese when you boot up I guess you have to flash the bootloader from A910F but you can't.
Download Samfirm 0.36 and download the latest SM-A9100 firmware.
http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Be sure to tick Binary Nature.

gsnewport said:
Thanks for the development, not much out there for the A9100/A910f. Own a A9100(CH), which came without any Google apps and full of Chinese applications and region locked. Was able to load recovery and unencrypt boot, root, sideload Google apps. Is there a way to remove my region lock? Wish someone would develope the A910f international firmware to port over to the A9100. The A9 phone has some pretty impressive specs, hope for more development. Thank you.
Click to expand...
Click to collapse
You can try this out.
I have repacked the A910F firmware so it will be flashable on the A9100. I have replaced the A910F build.prop with the A9100 build.prop to help prevent boot issues.
It is the system image only. It should flash fine with ODIN in the AP slot. Whether it will boot or not is another matter, but I should think it will. If everything will be working, I don't know.
It may also be necessary to flash the A910F kernel boot.img. NOTE: this boot.img does not support encryption.
A910FXXU1APFC_no_encryptable_boot
Make sure you have a TWRP backup of the system partition or the stock firmware before flashing just in case you need to restore.
sm-a9100_system.img.tar.zip
.
.

Related

Stock system and vendor partitions with FACE Unlock (Indian Version)

Assalamu alaikum people,
Presenting you with the stock ROM system.img for our Honor 9 Lite. I received my phone yesterday i.e. on 22ndMarch'18 so, this ROM is the latest preloaded ROM you can find. I have ordered the device from India so the ROM is Indian version. I don't know if the international version is any different or not. This system.img has the face unlock feature. The ROM is pre-rooted using Magisk but you know that Magisk is system-less root. So, I don't think the root still persists. It is untouched stock so expect all the bloatware to still be there.
And some people are telling me that Face unlock does not work. Try flashing vendor partition too. That might bring face unlock
Instructions to flash the ROM
I tried fastboot flash but it did not work for me. It showed up a weird error. When I did twrp flash, it works. So,
Put the system.img into your SDcard
Reboot into twrp
Choose Install
Select the "Select Image"
Select system.img
Choose to flash to system partition
Reboot. Enjoy
LInks
System image
https://drive.google.com/file/d/1h_Doj7XfC6-LT3zTAxjcGhuo-9qGg1mL/view?usp=sharing
Vendor image
https://www.androidfilehost.com/?fid=818070582850504951
This system.img works fine. Thanks @aveemashfaq
Which version and build number??
Hi, can I flash it via fastboot ?
Idon't have twrp.
aveemashfaq said:
Assalamu alaikum people,
Presenting you with the stock ROM system.img for our Honor 9 Lite. I received my phone yesterday i.e. on 22ndMarch'18 so, this ROM is the latest preloaded ROM you can find. I have ordered the device from India so the ROM is Indian version. I don't know if the international version is any different or not. This system.img has the face unlock feature. The ROM is pre-rooted using Magisk but you know that Magisk is system-less root. So, I don't think the root still persists. It is untouched stock so expect all the bloatware to still be there.
Instructions to flash the ROM
I tried fastboot flash but it did not work for me. It showed up a weird error. When I did twrp flash, it works. So,
Put the system.img into your SDcard
Reboot into twrp
Choose Install
Select the "Select Image"
Select system.img
Choose to flash to system partition
Reboot. Enjoy
Please someone download and flash and verify it works. It works for me but I am not sure whether it uploaded completely or not. If it is broken, I will re-upload tomorrow.
LInks
https://drive.google.com/file/d/1h_Doj7XfC6-LT3zTAxjcGhuo-9qGg1mL/view?usp=sharing
Click to expand...
Click to collapse
Pl brief the process followed for rooting with magisk.
Thanking you.
excelly2k1 said:
Pl brief the process followed for rooting with magisk.
Thanking you.
Click to expand...
Click to collapse
Here you have Video Tutorial for rooting Honor 9 Lite https://forum.xda-developers.com/9-lite/how-to/unlock-bootloader-honor-9-lite-video-t3760243
aveemashfaq said:
Assalamu alaikum people,
Presenting you with the stock ROM system.img for our Honor 9 Lite. I received my phone yesterday i.e. on 22ndMarch'18 so, this ROM is the latest preloaded ROM you can find. I have ordered the device from India so the ROM is Indian version. I don't know if the international version is any different or not. This system.img has the face unlock feature. The ROM is pre-rooted using Magisk but you know that Magisk is system-less root. So, I don't think the root still persists. It is untouched stock so expect all the bloatware to still be there.
Instructions to flash the ROM
I tried fastboot flash but it did not work for me. It showed up a weird error. When I did twrp flash, it works. So,
Put the system.img into your SDcard
Reboot into twrp
Choose Install
Select the "Select Image"
Select system.img
Choose to flash to system partition
Reboot. Enjoy
Please someone download and flash and verify it works. It works for me but I am not sure whether it uploaded completely or not. If it is broken, I will re-upload tomorrow.
LInks
https://drive.google.com/file/d/1h_Doj7XfC6-LT3zTAxjcGhuo-9qGg1mL/view?usp=sharing
Click to expand...
Click to collapse
Dear @aveemashfaq,
You might be extracted the system.img after installing the custom recovery which implies that the system.img is not having the stock recovery with in it. Pl correct me if i am wrong.
Thanking you.
excelly2k1 said:
Dear @aveemashfaq,
You might be extracted the system.img after installing the custom recovery which implies that the system.img is not having the stock recovery with in it. Pl correct me if i am wrong.
Thanking you.
Click to expand...
Click to collapse
No. system.img is a different partition. It does not include any recovery. Neither stock nor twrp. Your recovery has the partition of recovery_ramdisk.
Dear @aveemashfaq,
Thank you for the clarification. Can i have the stock recovery then?
Thanking you.
Thanks
Thanks for sharing vender image file ? I have formatted my vender image.. flashed .. it cured my phone. :laugh:
Can You Please Compress The File In Zip Or Rar . This File Is Very Big .
I have flashed treble rom and now i have to go back to stock so what should i do
should i flash only system image or both system and vendor????
plz help
[email protected] said:
I have flashed treble rom and now i have to go back to stock so what should i do
should i flash only system image or both system and vendor????
plz help
Click to expand...
Click to collapse
U have to flash both
I downloaded System. img and flashed, it's working great. I flash to System image, not system partition.
What is Vendor image?? Do I need to flash that also?? If yes what to select in Flash to......??
Btw Themes are not working everything else is working great. I flash Magisk 16.0 to have root access.
Can anyone tell me how themes will work??
I flashed Vendor.img to vendor image and now My phone is not starting. I repeated the same step (flashing system.img) but still my phone is not starting.
please tell how to flash correcting, write now my phone is in dead condition.
---------- Post added at 02:03 PM ---------- Previous post was at 01:35 PM ----------
Oushal kDee said:
Thanks for sharing vender image file I have formatted my vender image.. flashed .. it cured my phone. :laugh:
Click to expand...
Click to collapse
Can you please tell me step wise how to flash system.img and vendor.img.
I have twrp installed.
thanks
flash completed
sir flash completed but phone not starting
Stock Recovery and Boot Image
Can you please give me stock recovery and boot image file?
I badly need this. I can not download the whole ROM.. Plzzzzzz............:crying::crying::crying:
After flashing the abv system img & vendor partion.. phn will be wakeup bt Mobile signal,wifi,bluetooth are not working..
---------- Post added at 08:17 AM ---------- Previous post was at 08:16 AM ----------
aveemashfaq said:
Assalamu alaikum people,
Presenting you with the stock ROM system.img for our Honor 9 Lite. I received my phone yesterday i.e. on 22ndMarch'18 so, this ROM is the latest preloaded ROM you can find. I have ordered the device from India so the ROM is Indian version. I don't know if the international version is any different or not. This system.img has the face unlock feature. The ROM is pre-rooted using Magisk but you know that Magisk is system-less root. So, I don't think the root still persists. It is untouched stock so expect all the bloatware to still be there.
And some people are telling me that Face unlock does not work. Try flashing vendor partition too. That might bring face unlock
Instructions to flash the ROM
I tried fastboot flash but it did not work for me. It showed up a weird error. When I did twrp flash, it works. So,
Put the system.img into your SDcard
Reboot into twrp
Choose Install
Select the "Select Image"
Select system.img
Choose to flash to system partition
Reboot. Enjoy
LInks
System image
https://drive.google.com/file/d/1h_Doj7XfC6-LT3zTAxjcGhuo-9qGg1mL/view?usp=sharing
Vendor image
https://www.androidfilehost.com/?fid=818070582850504951
Click to expand...
Click to collapse
After flashing the abv system img & vendor partion.. phn will be wakeup bt Mobile signal,wifi,bluetooth are not working..

[Easy_Root/Unroot][Any_Oreo/Nougat_Firmware_V4_Bootloaders][Tmp_Twrp_Recovery]

EASY ROOT/UNROOT FOR S7 OR S7E ALL NOUGAT OR OREO STOCK ROMS
THANKS @klabit87 FOR OREO ROOT
TEMPORARY TWRP RECOVERY VIA ADB THANKS TO @afaneh92​
This is for AT&T, T-Mobile and Verizon and Sprint running V4 bootloaders only!​
This tool will allow you too easily root any stock rom allowing you to make any modifications you might want then easily unroot for better performance
This will Also give you a fully functional TWRP recovery that can be accessed via adb. TWRP is fully functional on OREO Roms but is limited on Nougat roms
The initial setup does require a data wipe.​
S7 G930T Flat Odin Factory FIrmware Downloads
G930TUVU4CRI2_8.0_4File_USA (T-Mobile).rar
ADB_Root Temporary Twrp Tool Download
S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z
S7 G935 Edge Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G935_EDGE_OREO.7z
SM_G935_EDGE_NOUGAT.7z
S7 G930 Flat Root/Unroot Odin Files Downloads
These Files Are Needed To Unroot Your Phone
SM_G930_FLAT_OREO.7z
SM_G930_FLAT_NOUGAT.7z
Instructions
1. Download S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z and your model and version you want from above
2. Unzip S7_S7E_ROOT_UNROOT_ADB_TOOLS.7z to S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
3. Unzip the Model/Version file you downloaded and copy the files to the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and place them in the Odin folder
4. Prepare your phone for a data wipe
5. Reboot your phone to download mode and flash the AP_ROOT_G93*.tar in the Odin AP slot and reboot your phone to recovery
6. Once phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
7. Now in the cmd window make sure your device is connected and choose Option (1) Launch TWRP
8. Your phone should launch TWRP leave phone plugged in and command window open on computer
9. Now In Twrp choose wipe and choose format data. Type yes in the box when it ask
10. Now in cmd window choose Option(8) Push Root.zip to Phone
11. Now in TWRP choose install and select the Root.zip
12. After zip is installed reboot and go through setup.
13. Once through setup make sure you are rooted
To Unroot Your Phone
1. In the Root Control app choose phone settings and unroot phone make sure phone is connected to computer
2. Now depending on the type of root you choose your phone will reboot to download if you chose system root or stock recovery if you chose systemless root. If your phone reboots to download mode skip to number 5
3. If your phone reboots to recovery once your phone is in recovery run the Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder
4. In cmd window choose Option(3) Unroot phone will reboot too download mode
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G93*.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar
To Reroot Your Phone
1. Reboot to download in Odin AP slot flash AP_ROOT_G93***.tar
2. Phone will reboot then will reboot one more time and you will be rerooted
To Enter TWRP When Rooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Manually reboot phone to recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP
2. To Exit TWRP simply choose reboot
To Enter TWRP When Unrooted
Remember with Nougat TWRP cannot mount data because of encryption so some zips wont work
1. Put phone in download mode In Odin AP slot flash AP_ROOT_G93***.tar force phone to reboot to recovery. If you let phone boot it will reroot and you will have to run the unroot from the root control app.
2. In recovery launch Setup.exe in the S7_S7E_ROOT_UNROOT_ADB_TOOLS folder and choose Option(1) Launch TWRP.
3. Do whatever you need too do
4. To exit Twrp choose reboot to Download
5. In Odin BL slot choose the BL_G93*_DELETE_CACHE.tar and flash phone will reboot to recovery and say processing update then get an error and strart rebooting recovery
6. Let recovery bootloop at least once thin force phone back to download mode
7. In Odin AP slot flash BL_ENTER_ENG_RECOVERY_G93*.tar and flash phone will reboot to recovery with a bunch of red cache errors
8. In recovery choose wipe cache then reboot back to bootloader from recovery
9. In Odin BL slot choose BL_OREO_STOCK_G93*.tar for Oreo or BL_RESET_DM_VERITY_G93*.tar for Nougat and flash
10. This is important as soon as odin is done flashing and phone powers off immediately hold buttons to force phone to recovery
11. When phone reboots to recovery you will get no command error then when phone shows recovery options in black box at very botton it should say Successfully verified. If it says unsuccessful or failed then start at number 5 again. If successful and on oreo you are done.
12. If on Nougat and successful from recovery reboot to bootloader in Odin BL slot flash BL_NOUGAT_STOCK_G93*.tar
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
I had to look this up so thought I'd share This is for Tmobile Versions
Example: G930TUVS8CRJ1 (5th # from right is 8, BL version - this is found in Settings>About Phone>Software Information>Baseband Version)
Which Oreo versions are safe (ver 4):
G930TUVU4CRI2 Oct 1, 2018
G930TUVU4CRF1 June 28, 2018
Not safe (ver 8):
G930TUVS8CRJ1 Oct 26, 2018 release date
---------- Post added at 02:55 AM ---------- Previous post was at 02:49 AM ----------
BTW nice work as always Jr! Oh, & almost forgot ...your last comment saved my @zz!!! I wasn't aware of the ver 8 issue, and the fact that u can't downgrade!! DAMN Samsung!!!!! I was seriously about to try this latest update just to try & figure out RCS not working on CRF1 & randomly came across this! THANKS! (BTW if you know anything about RCS on s7 or services/apks needed for functionality on CRF1 please pm me!)
On another note, let's have a contest to see who can hold on to the S7 the longest as their primary phone
It works perfectly , I had no problem installing it. But I have a question:
Could I replace the SuperSu with the Magisk?
I am also in the Rom Project L S7 of Lanc-City: 3
FranMLG said:
It works perfectly , I had no problem installing it. But I have a question:
Could I replace the SuperSu with the Magisk?
I am also in the Rom Project L S7 of Lanc-City: 3
Click to expand...
Click to collapse
No magisk requires custom boot.img
Sent using some kind of device I modified
jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
Thanks for the effort and providing root for T-Mobile. Perhaps I am an unlucky person. By the time I discovered this thread, my phone was already updated to G930TUVS8CRJ1 version. I am wondering if there is any hope for V8 bootloader to root their phone in near future. Here is my humble request if you could provide root for V8 update. TIA.
jrkruse said:
No magisk requires custom boot.img
Sent using some kind of device I modified
Click to expand...
Click to collapse
can we do full backup after setting up the phone and then restore it without any bugs and issues?
zfk110 said:
can we do full backup after setting up the phone and then restore it without any bugs and issues?
Click to expand...
Click to collapse
Do a system.img backup
Sent using some kind of device I modified
Thank you. It worked fine on my nougat s7 flat with v4 bootloader. Now I have nougat root. I have a question if I may, Can I use tmp twrp to flash Oreo or one of your, or other roms? Or would I need to upgrade the kernel or something because I can flash Oreo being that I'm on Nougat. Thanks.
boofbatch said:
Thank you. It worked fine on my nougat s7 flat with v4 bootloader. Now I have nougat root. I have a question if I may, Can I use tmp twrp to flash Oreo or one of your, or other roms? Or would I need to upgrade the kernel or something because I can flash Oreo being that I'm on Nougat. Thanks.
Click to expand...
Click to collapse
You have to update bootloaders and firmware as well so its better to update to oreo first
Sent using some kind of device I modified
working fine.
update: gonna have to switch back to u firmware because even when i unroot the phone, certain games wont work or connect to server. i cant install magisk to bypass safetynet or hide magisk after installing so root isnt even seeming worth it on this device. might as well stick to the u firmware and disable the apps I dont need and disable ota update so that i dont get the v8 bootloader update. It was fun while it lasted.
jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
Man, will you update the Recovery for the new security patch (CRJ1) ?, I've run out of Root , and I can no longer go back in the version.
---------- Post added at 04:50 PM ---------- Previous post was at 04:47 PM ----------
jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
That's exactly what happened to me, I did not know
FranMLG said:
Man, will you update the Recovery for the new security patch (CRJ1) ?, I've run out of Root , and I can no longer go back in the version.
---------- Post added at 04:50 PM ---------- Previous post was at 04:47 PM ----------
That's exactly what happened to me, I did not know
Click to expand...
Click to collapse
yikes sorry to hear that
jrkruse said:
Beware If you update to new V8 bootloader then rooting and everything will not work. You will be stuck on stock possibly for good
Click to expand...
Click to collapse
I bought a phone which is already to g930tuvs8crj1 I tried to down grade but it wont let me, what are my options? Thanks
zfk110 said:
I bought a phone which is already to g930tuvs8crj1 I tried to down grade but it wont let me, what are my options? Thanks
Click to expand...
Click to collapse
Enjoy Stock
Sent using some kind of device I modified
jrkruse said:
Enjoy Stock
Sent using some kind of device I modified
Click to expand...
Click to collapse
After looking around for 4 days I was finally able to find G930T U8 ENG ROOT Modem.bin file, but when I'm trying to flash it using odin it wont pass file Analyzing
I hope you can look more into it. if we can flash this then we can able to root U8 bootloaders too
https://drive.google.com/open?id=1dhHeYAPsCqKQ_eFfuzPaYbgFv0y1BSLr
These guys also selling Eng boot for $60
https://support.halabtech.com/index.php?a=downloads&b=file&id=90428
zfk110 said:
After looking around for 4 days I was finally able to find G930T U8 ENG ROOT Modem.bin file, but when I'm trying to flash it using odin it wont pass file Analyzing
I hope you can look more into it. if we can flash this then we can able to root U8 bootloaders too
https://drive.google.com/open?id=1dhHeYAPsCqKQ_eFfuzPaYbgFv0y1BSLr
These guys also selling Eng boot for $60
https://support.halabtech.com/index.php?a=downloads&b=file&id=90428
Click to expand...
Click to collapse
Im just waiting on them to email me the passwords
Sent using some kind of device I modified
Alright guys i really need your help...i just bought a used samsung. galaxy s7 G930T...the problem is it doesnt get any network...thr signal says searching and theres is nl network bar...the issue is i cant tell if it is unlocked or not..because it reads my sim...it displays the right access point....shoes sim tools...but just doesn't get network..i ve tried all sim cards...i tried using the tmobile unlock tool that came with the device butbit says unlock failed reboot device repeatedly....ive tried factory reset....i love this phone and would really like to use it...Pls any suggestions or help...the software version is 8.0. baseband version is G930TUVS8CRL1
marvelv94 said:
Alright guys i really need your help...i just bought a used samsung. galaxy s7 G930T...the problem is it doesnt get any network...thr signal says searching and theres is nl network bar...the issue is i cant tell if it is unlocked or not..because it reads my sim...it displays the right access point....shoes sim tools...but just doesn't get network..i ve tried all sim cards...i tried using the tmobile unlock tool that came with the device butbit says unlock failed reboot device repeatedly....ive tried factory reset....i love this phone and would really like to use it...Pls any suggestions or help...the software version is 8.0. baseband version is G930TUVS8CRL1
Click to expand...
Click to collapse
Sounds like you bought yourself a blacklisted phone
Sent using some kind of device I modified
jrkruse said:
Sounds like you bought yourself a blacklisted phone
Sent using some kind of device I modified
Click to expand...
Click to collapse
It is not blacklisted ...i already checked...any help?

How to update rooted S20 FE 5G without lost data ?

Hello,
I have XEO software from security patch 07.21
And rooted phone.
I try upgrade FW Odin. Choose CSC Home and update...
And telephone not started
Only try three times started and write fault system.
Only wipe data working and starting
How i can in future rooted my telephone, only uses magisk, and safe upgrade to next update without lost data ???
Please help... Thanks
I've never tried it...
[S20_FE SM-G781U/U1_Snapdragon]-[Upgrade Easily Firmware Using Odin]-[Automatically Root Remove Forceencrypt Patch Bluetooth And Fix Safetynet]
Must Have An Unlocked Bootloader To Do This! This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install...
forum.xda-developers.com
Thanks for info.
But i think i not good for my model.
I have SM-G781B
Other advaice please...
I try moore times and always i must wipe data
Always if add home CSC ( without delete data ) must later wipe data in menu ( always corrupted data, system )
onken said:
Thanks for info.
But i think i not good for my model.
I have SM-G781B
Other advaice please...
I try moore times and always i must wipe data
Always if add home CSC ( without delete data ) must later wipe data in menu ( always corrupted data, system )
Click to expand...
Click to collapse
If you were rooted while patching the boot.img with magisk you will have to redo it on each odin update with patched AP and Home CSC to keep the root & data.
This is the way I do it but it implies not to use twrp therefore caution is in order regarding modules which could lead to bootloop.
Full House said:
If you were rooted while patching the boot.img with magisk you will have to redo it on each odin update with patched AP and Home CSC to keep the root data.
Click to expand...
Click to collapse
Hello, thanks.
I can use old patched AP for new software ?
onken said:
Hello, thanks.
I can use old patched AP for new software ?
Click to expand...
Click to collapse
No you can't, you have to patch AP each time with magisk before flashing
Full House said:
No you can't, you have to patch AP each time with magisk before flashing
Click to expand...
Click to collapse
Ok.
Thanks for info
Maybe know why not can rooted new mode Samsung A52s ?
I always run this same method and telephone not starting
onken said:
Ok.
Thanks for info
Maybe know why not can rooted new mode Samsung A52s ?
I always run this same method and telephone not starting
Click to expand...
Click to collapse
Have you unlocked the BL?
Didn't you have the camera problem?
If you followed the procedure and it doesn't work maybe the patched AP file was corrupted during the transfer have you eliminated this probability?
I try many times patched. Always not working.
Not only in me.
But about camera not checked but if yes to big problem.
If not can uses later camera for rooted, why possible unlock bootlader permission from Samsung....
unlocking the bootloader doesn't cause an issue with the camera on this phone.
different story on the Galaxy Fold 3 but we are OK to unlock.
once you have patched the AP file DON'T use windows file manager to move it, use ADB pull command.
ADB Push and Pull - Push and Pull Files on Android Using Commands
You can push and pull files on Android using ADB commands. ADB Push and Pull make Android development easy &save time by reducing data retrieving tasks.
www.droidviews.com

[Galazy Z Fold2 F916U/U1_Snapdragon]-[Upgrade Easily Firmware Using Odin]-[Automatically Root Remove Forceencrypt Patch Bluetooth And Fix Safetynet]

Must Have An Unlocked Bootloader To Do This!
This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magislk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required
Info For Bootloader Unlocks Can Be Found In Post 2
I Do Not Recommend Mixing Bit 1 With Higher Firmware!!!!
Unless Using Bit Safe Firmware That Is Patched​
Downloads
SM-F916U/U1/W- Model
USERDATA_AIO_F916U_5G_FORCE_WIPE_10_10_21.tar.md5
This will force a wipe of data no mater what.
Full Odin 3.1.1 Bit1 Safe Firmware
F916USQS2EUH9_BIT1_SAFE.7z Thanks @markfm
This are odin files and will safely update all image files too bit 4 and keep bit 1 bootloaders. Unfortunately this will wipe data this is beyond my control as it seems to be a side affect of mixing firmware it causes data not to mount and therefore my AIO will format it. This is full firmware with USERDATA_AIO. This will put you on U firmware. Before flashing I recommend removing your google account and make sure in download mode you are not frp locked
If above USERDATA_AIO_G78*_FORCE_WIPE_NO_BL is newer than the one in this zip use the newer one from above
Odin3_v3.14.1_3B_PatcheD.zip
TWRP Recovery Provide by afaneh92
Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware
Install Instructions For Newly Unlocked Devices
You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.
2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again
View attachment 5217631
3. Use patched 3.14 odin and load file USERDATA_SLOT_F916U_**.tar.md5 you must choose one of the FORCE_WIPE files and load in the USERSDATA slot of odin and flash file
4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup
Install Instructions For Updating Firmware On Phone Already Unlocked
1. Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above
2. Use patched 3.14 odin and load stock firmware in appropriate slots use regular CSC file in the CSC slot and load file one of the USERDATA_SLOT_F916U_**.tar.md5 in the USERSDATA slot of odin and flash firmware. Do not use the User Data file that comes with firmware.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not
Install Instructions If Updating Images With TWRP
1. When done flashing images in TWRP Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above.
2. Use patched 3.14 odin and load file USERDATA_AIO_F916U_NO_WIPE_NO_BL.tar.md5 in the USERSDATA slot of odin and flash file.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not.
4. Alternatively to using USERDATA_AIO_F916U_NO_WIPE_NO_BL.tar.md5 in odin you can use AIO_Magisk_22_S20_Series.zip found in post 2
Features
No patches or mod zips are needed phone will already be rooted
Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms
Thanks To People That Make My Life Easier
elliwigy
klabit87
Krog18
me2151
stang5litre
Raymonf for modified odin
rayan-refoua for boot animation
TheMadScientist
afaneh92
kdrag0n for safetynet fix
3arthur6 for bluetooth patch zip
JDBarlow for test S20 stuff
Xylvion for testing s21
dark11b for testing s21
Hi, can i have the procedure for rooted Fold2 F916B for firmware update.
I'm super excited about this. Hope to see the info for bootloader unlock soon so I can try it. Thanks you're awesome!
Does this mean it can be updated on the latest firmware with root?
PLZ PLZ PLZ do this for the z Fold 3 u1 snapdragon please sir your work has been a God send since the s8+ for me. Thank you
The full odin bitsafe firmware link isn't working
Hey can you fix the link to the odin firmware please?
Nothing? Please fix the link to the odin firmware it doesn't work.
same here. Please reupload to the drive.
halx said:
same here. Please reupload to the drive.
Click to expand...
Click to collapse
What's going on here ? Why hasn't the OP responded to us?
Ok it's official....samsung murked the OP.

I have a SOFT BRICK on my A605FN (a6plte)

So i tried to root my phone and it happend. After i flashed A10 to phone (again) because my system stuck on bootloop after trying to again flash root. I booted to the system. The normal welcome screen appear, instead of complete it, i decided to go to the recovery and wipe phone again. I dont know why i did it, but i did and now the phone is stuck on bootloop. I tried many things but when i try to even flash system again without root, it stucks on logo. One boot takes time about 2,3 minutes, at the end almost black screen appears (almost because its little shining, it looks like LCD black) for 3sec then everything goes again until battery drain out. From this i can normally boot to any custom or stock recovery. It happend like 3weeks ago and phone is still on bootloop. Please help. Im on TWRP 3.2.3-1_ashyx and i cant find any newer for this phone model, there isnt any orangefox recovery too. I dont know what to do, i tried everything i can like ADB, no success, odin, no success, apps that repair system, also no success. I dont know Im a moron or something but if you can help, tell me everything step by step. Im on bootloader 8.
here is the TWRP i use
Download and flash latest stock firmware for your country via Odin:
Download Samsung Galaxy A6+ SM-A605F firmware
Download the latest Samsung firmware for Galaxy A6+ with model code SM-A605F. Check out our free download or super fast premium options.
www.sammobile.com
Then use this TWRP version for easy flashing custom roms or Magisk (root):
[RECOVERY][UNOFFICAL][LINK FIXED] TWRP 3.5.0 for Samsung Galaxy A6+ 2018
Team Win Recovery Project 3.5.0 Special Notes: 1. DON'T FORGET TO ENABLE "OEM UNLOCK" (located in Developers options). 2. KNOX will be tripped once you flashed custom binaries to your phone. (Your warranty may be voided. However this may not...
forum.xda-developers.com
However you don't need TWRP if you need only root. Instructions here:
Installation
The Magic Mask for Android
topjohnwu.github.io
When i flash latest stock rom im still in bootloop, I also have problem with flashing that TWRP because odin just errors with Complete (write) operation Failed. Re-flashing system doesnt work. I tried everything, even re-partition. I cant use ADB, also I cant do TOTAL re-install of system because my TWRP is too old and i cant delete Vendor partition, only from TWRP 3.4.0 or higher i can do that, also that old TWRP is buggy,
MDN2137 said:
When i flash latest stock rom im still in bootloop
Click to expand...
Click to collapse
How did you do that? Just putted AP, BL, CP and CSC (not HOME_CSC) in Odin and flashed?
nqnxev said:
How did you do that? Just putted AP, BL, CP and CSC (not HOME_CSC) in Odin and flashed?
Click to expand...
Click to collapse
Im not that stupid . I putted AP fle in AP slot like everything else, i also used CSC not Home CSC.
nqnxev said:
How did you do that? Just putted AP, BL, CP and CSC (not HOME_CSC) in Odin and flashed?
Click to expand...
Click to collapse
Im 100% sure i putted everything in right slot
If you have working properly TWRP at the moment, then just flash newer version TWRP from current TWRP (get IMG file and flash as "Recovery" (choose "Recovery" partition for flashing) and reboot).
MDN2137 said:
and i cant delete Vendor partition
Click to expand...
Click to collapse
Why would you do that? Don't mess with partitions ifself without reason. Just try to update TWRP and then wipe partitions: cache, dalvik, data. You can then try also flashing GSI. Follow instructions from this thread. Maybe it will help.
well... the phone is still stuck on bootloop, but i updated the TWRP thanks to you, but before i had to wipe several partitions to do that, because without that i had error with that SEANDROID bla bla bla, it just means i propably installed wrong recovery or system. I dont know what to do i tried everything i know and Im out of ideas. Please help, this phone is trying to kill me, i want to throw this phone from scycraper and i think this is the best idea.
I think that phone is bricked really hard, like a real brick, but maybe there is still some chance.
The same situation after flashing GSI? Also bootloop?
I dont know how to flash GSI on latest Android10 update
MDN2137 said:
I dont know how to flash GSI on latest Android10 update
Click to expand...
Click to collapse
Instructions here.
Well...... it worked! Thanks.

Categories

Resources