Database Develop

No Quick Charge 2.0/3.0 support

TurboPower charger that comes with it is the only thing that will give it a fast charge.
I have no idea how or why Quick Charge tech was left out.

Mine does indeed say "TurboPower Connected" and charges super-fast when I use the USB C Quick Charge 3.0 AUKEY Amp Type-C Dual-Port Wall Charger and the USB C Quick Charge 3.0 AUKEY Car Charger with Dual AiPower Ports. I can't seem to find it now, but I remember reading somewhere that the Moto Z does use QC 3.0, otherwise I wouldn't have bought the above products. NOTE: I am going USB-C to USB-C.

Does not use 3.0.
http://forum.xda-developers.com/z-force/help/moto-z-forces-turbopower-quickcharge-t3429607

In short QC 2.0 and 3.0 don't follow usb c spec according to a top Google engineer. According to Usb c spec the vbus voltage should not exceed 5v. QC tech exceeds this by using 9v and 12v to achieve more power. Motorola built the Moto Z according to spec which allows you to ramp up the current (amps) to achieve more power which is why our stock charger outputs at 5.7amps. You don't need QC to charge fast with Usb c. Usb c with power delivery is actually better . Either way the QC chargers put out 15 watts total. Our turbo charger does 28.5 watts using 5v at 5.7 amps and is actually faster than what's out now. QC chargers use higher voltage to achieve this at 9v 1.7 amps 15 watts, a charger doing 5v 3a does the same 15 watts. So to turbo charge your phone don't use QC chargers unless it also outputs at least 5v at 3a that's the key. Anything less than 3a won't turbo charge. It needs to be a usb C to usb C cable so the charger should have a usb C port not a usb a port like most of you are trying to use. No other charger out now does more than 3amps besides the turbo charger until then use chargers that do 5v 3a. Verizon has a fast charger that supports this and all other fast charging tech.

Here is some info I have been updating on another thread. Here are some 5V/3A Type-C options:
Wall chargers:
http://www.choetech.com/CHOE-3A-USB-C-Charger/
http://www.tronsmart.com/tronsmart-w2pte-type-c-quick-charger-3.0-dual-ports-rapid-wall-charger
https://www.amazon.com/gp/product/B01DVH7Q8M
Batteries:
http://www.tronsmart.com/products/tronsmart-presto
http://www.ravpower.com/20100mah-external-battery-charger-QC3.0-type-c.html
https://www.anker.com/products/A1371012
Car chargers:
http://www.tronsmart.com/product-ccta-quick-charge-3.0-car-charger
http://www.tronsmart.com/product-c2pe-car-charger
http://www.blitzwolf.com/BlitzWolf-Qualcomm-Certified-Quick-Charger-QC-3.0-33W-USB-Type-C-BW-C8-Car-Charger-with-Micro-Cable-p-85.html
https://www.amazon.com/gp/product/B01E764DXM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B018TGGH4E
I know these are not as nice as having some other 5V/5.7A charging options but at least they should charge better than QC 3.0 chargers.

fliptwister said:
Here is some info I have been updating on another thread. Here are some 5V/3A Type-C options:
Wall chargers:
http://www.choetech.com/CHOE-3A-USB-C-Charger/
http://www.tronsmart.com/tronsmart-w2pte-type-c-quick-charger-3.0-dual-ports-rapid-wall-charger
https://www.amazon.com/gp/product/B01DVH7Q8M
Batteries:
http://www.tronsmart.com/products/tronsmart-presto
http://www.ravpower.com/20100mah-external-battery-charger-QC3.0-type-c.html
https://www.anker.com/products/A1371012
Car chargers:
http://www.tronsmart.com/product-ccta-quick-charge-3.0-car-charger
http://www.tronsmart.com/product-c2pe-car-charger
http://www.blitzwolf.com/BlitzWolf-...-BW-C8-Car-Charger-with-Micro-Cable-p-85.html
https://www.amazon.com/gp/product/B01E764DXM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B018TGGH4E
I know these are not as nice as having some other 5V/5.7A charging options but at least they should charge better than QC 3.0 chargers.
Click to expand...
Click to collapse
Will these charge as fast as the stock charger out of the box? And with a USB C cable does it need to support quick charge, or do all USB C cables support quick charge as long as you have it plugged into a USB C quick charge adapter like you linked to?

Nothing charges as fast as the stock charger as far as I know.

I looked around on Amazon to try to find a spare charger with the same speed as the OEM, but there are none as far as I know. QC actually goes against usb-c standard, so whoever has a phone that supports both is technically being shorted on charge speed. I will be waiting for the verified brands (ex. Anker/Aukey) to release a legitimate charger because there have been instances where wall chargers have completely destroyed devices. For the fastest charge, you'll want usb-c cables end to end, but since usb-c is not the standard yet, I would be very careful when buying lesser-known usb-c accessories. Z owners will have to wait for the market to catch up at this point.

Total side note but I wonder if the problems Samsung is having is because of their bastardized quick charge/type setup.
I'm happy we don't have QC.

fliptwister said:
Here is some info I have been updating on another thread. Here are some 5V/3A Type-C options:
Wall chargers:
http://www.choetech.com/CHOE-3A-USB-C-Charger/
http://www.tronsmart.com/tronsmart-w2pte-type-c-quick-charger-3.0-dual-ports-rapid-wall-charger
https://www.amazon.com/gp/product/B01DVH7Q8M
Batteries:
http://www.tronsmart.com/products/tronsmart-presto
http://www.ravpower.com/20100mah-external-battery-charger-QC3.0-type-c.html
https://www.anker.com/products/A1371012
Car chargers:
http://www.tronsmart.com/product-ccta-quick-charge-3.0-car-charger
http://www.tronsmart.com/product-c2pe-car-charger
http://www.blitzwolf.com/BlitzWolf-Qualcomm-Certified-Quick-Charger-QC-3.0-33W-USB-Type-C-BW-C8-Car-Charger-with-Micro-Cable-p-85.html
https://www.amazon.com/gp/product/B01E764DXM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B018TGGH4E
I know these are not as nice as having some other 5V/5.7A charging options but at least they should charge better than QC 3.0 chargers.
Click to expand...
Click to collapse
I bought the Choetech charger from amazon and it works great on my Z Force. no where near the OEM charger but still charges the phone dead to full in a little over an hour and a half. from my limited testing.

fr4nk1yn said:
Total side note but I wonder if the problems Samsung is having is because of their bastardized quick charge/type setup.
I'm happy we don't have QC.
Click to expand...
Click to collapse
Ha! I was thinking the same when I heard about battery fire from the Note 7.

I just bought another oem charger from amazon and called it a day.

squidder said:
I just bought another oem charger from amazon and called it a day.
Click to expand...
Click to collapse
But car charger?

sniperess said:
But car charger?
Click to expand...
Click to collapse
The car charger that Verizon sells turbo charges the phone, but not as quickly as the stock home charger. I don't think any charger will charge as fast as the stock home charger, since it's optimized for the phone. But the Verizon USB-C charger charges the phone plenty fast.

tgambitg said:
The car charger that Verizon sells turbo charges the phone, but not as quickly as the stock home charger. I don't think any charger will charge as fast as the stock home charger, since it's optimized for the phone. But the Verizon USB-C charger charges the phone plenty fast.
Click to expand...
Click to collapse
I can confirm this. I just got this phone on an upgrade after insisting to the Verizon sales representative that I did NOT want a Galaxy S8, that I was absolutely sure I didn't want the S8, and that I think the Z Force is a much better device than the S8. After seeing the genuine shock on his face that I slighted his phone, I bought the OtterBox case and the Verizon branded USB-C car charger with it.
The car charger definitely charges faster than my non quick charge USB-C cable, but not as fast as the stock charger. The stock charger will take me from ~5% to full in an hour. The Verizon car charger takes about an hour and twenty minutes to go from ~5% to full.
All in all, it was worth the money spent on the charger. It is definitely better than the 8 hour charge my standard USB-C usually takes.

Post your charging time (5v2A, QC3, QC4)

I ordered an A2 and a QC 3 wall charger, I'm considering also a car charger, but seems not that needed.
Please tellme... About your Chargint times (Half/Full) on basic wall 5V2A Chager, and QuickCharge 3.0/4.0 chargers, also on car chargers as well
Also, Does anyone tried an iPad charger?

On QC 2.0/3.0 ? form 10% to 100% - around 1h 10m ( not sure abot QC version but was fast charging icon )

I was measuring charging time with stock charger, here are my results:
Greetings everyone,
I have charged my phone with stock charger that came with it, by the way I have global version. 5V=2A)
After a 30 minutes my phone was at 54% i was surprised with percentage!
After an hour I had 92% of battery charged.
Battery fully charged at 1:13.
I want to ask, how fast would battery charge if I use QC v4.0?
Thank you in advance,
DarkoMiA2, :fingers-crossed: Bosnia

Got mine today. I don't have any qc. But have mi power bank which have qc 3.0 capability. I am using but phone doesn't show any quick charge indicator. Is it normal?

I can't find the link to buy a QC 4 charger(I'm from India). I can't find anyone who has actually used snd tested the device with QC 4 either.

HashDragon said:
I can't find the link to buy a QC 4 charger(I'm from India). I can't find anyone who has actually used snd tested the device with QC 4 either.
Click to expand...
Click to collapse
As of now there are no QC 4.0 charger in market... It'll take couple of months before they get on shelves for sales.. Till then use QC 3.0 or stock charger.
PS, or you can buy mi 3i power bank, it has QC 3.0 capabilites and when QC 4.0 chargers hit the market you can buy one of those too..so then you will have a power bank and a QC 4.0 charger...

veeru1saini1 said:
As of now there are no QC 4.0 charger in market... It'll take couple of months before they get on shelves for sales.. Till then use QC 3.0 or stock charger.
PS, or you can buy mi 3i power bank, it has QC 3.0 capabilites and when QC 4.0 chargers hit the market you can buy one of those too..so then you will have a power bank and a QC 4.0 charger...
Click to expand...
Click to collapse
I actually can't find a link for mi 3i power bank or qc 3.0 wall charger either
BTW, Do you have any idea about the charging % that we can expect out of qc 4.0 in future?

HashDragon said:
I actually can't find a link for mi 3i power bank or qc 3.0 wall charger either
BTW, Do you have any idea about the charging % that we can expect out of qc 4.0 in future?
Click to expand...
Click to collapse
For qc 3.0 wall charger https://www.flipkart.com/syska-qual...STACCEWVGWSNPZFFXWIGNAZQ&marketplace=FLIPKART
MI 2i power bank
Correction it's 2i actually... Mi 10000mAH Li-Polymer Power Bank 2i (Black) https://www.amazon.in/dp/B077RV8CCY/ref=cm_sw_r_cp_apa_i_fFIGBbWDW603N
About qc 4.0 improvement, no idea as there is no charger as of now even in international market..
Edit : quick tip, never but cheap 3.0 chargers found on Amazon (quantum zero, geekzone.. etc)

Dash Charge Oneplus 3 Charger & Cable on mi 8

Hi ! I had 2 charger for my Oneplus 3 and cable usb type -c ( I had 3 cable usb type-c ugreen too but no charger)
Can I use my Dash charger with my mi 8 ? I had buy a mi 8 and receive it tomorrow global version with EU charger but don't know wich charger it Qc 3.0 or 4.0 ? And with my oneplus Dash charge is 5v 4amp can work on mi 8 or do buy another charger ? Thank you

ggkameleon said:
Hi ! I had 2 charger for my Oneplus 3 and cable usb type -c ( I had 3 cable usb type-c ugreen too but no charger)
Can I use my Dash charger with my mi 8 ? I had buy a mi 8 and receive it tomorrow global version with EU charger but don't know wich charger it Qc 3.0 or 4.0 ? And with my oneplus Dash charge is 5v 4amp can work on mi 8 or do buy another charger ? Thank you
Click to expand...
Click to collapse
it will charge at normal speed. I tried myself with original oneplus car dash charger, no fast charging for Mi8.

lockmunk said:
it will charge at normal speed. I tried myself with original oneplus car dash charger, no fast charging for Mi8.
Click to expand...
Click to collapse
Ok thanks. I can use it no mistake but slow. I think buy a qc 3 or 4 it's good. For car I have too dash car and it's so good I loose it. I have car charger qc 2 or 3 I don't know.
Thanks

Rommco05 said:
DASH charger is good for OP, strange for others. Highly not recommended to use DASH on other devices than OP
Click to expand...
Click to collapse
Why not?
It is a very good 5V charger, with Xiaomi you can expect up to 2A current, not more. Perfectly safe to charge anything, however not quickest charging option for others.

Rommco05 said:
RIP battery. Do u think it is good charging phone with no original charger? Especially with OP DASH
Click to expand...
Click to collapse
Bull*hit....
Dash charging just doesnt work on mi8, normal charge will not cause any damage on any other phone or their battery.
you do not necessarily need a original charger from your phone manufacturer.
The phone negotiate how much power the battery gets not the charger ... the charger slows down the load balance to 2,4A (2,4A*5V=12W)
With a 2,4A output you'll reach ~12W at peak due to cable limitations you'll get 10w
QC 3.0 reach ~ 18 watt on peak with variable voltage and ampere steps. (3,6 - 20v)
Same on Dash Charge, Dash uses variable voltage and ampere steps like QC but doubles the charging lanes.
You can charge your phone with any charger you get, the worst you can get is slower charging speed.

tomsag said:
Why not?
It is a very good 5V charger, with Xiaomi you can expect up to 2A current, not more. .
Click to expand...
Click to collapse
Bull****, the original MI 8 charge is QC 3.0 and I'm getting up to 3.3A on it.
It's very fast..
---------- Post added at 10:39 AM ---------- Previous post was at 10:36 AM ----------
Flash-User said:
Bull*hit....
Dash charging just doesnt work on mi8, normal charge will not cause any damage on any other phone or their battery.
you do not necessarily need a original charger from your phone manufacturer.
The phone negotiate how much power the battery gets not the charger ... the charger slows down the load balance to 2,4A (2,4A*5V=12W)
With a 2,4A output you'll reach ~12W at peak due to cable limitations you'll get 10w
QC 3.0 reach ~ 18 watt on peak with variable voltage and ampere steps. (3,6 - 20v)
Same on Dash Charge, Dash uses variable voltage and ampere steps like QC but doubles the charging lanes.
You can charge your phone with any charger you get, the worst you can get is slower charging speed.
Click to expand...
Click to collapse
What he said.

Rommco05 said:
I see, probably u never heard about optimization, calibration and testing btw and that's isn't about fast or slow charging
Click to expand...
Click to collapse
OKay its just your opinion but my opinion is you have no insight in electrical topics or the insight of such an charger.
optimization - the charger doesn't overcharge or use an overvoltage on your phone when its not support their specific fast charge technology it simply slow down to 5v - max. 2.4A, these charging speed will never cause any damage on your phone.
its just simple: an QC phone doesnt use the benefits of SuperCharge technology or Dash Charge and vize versa....
And trust me i've done more calibration and testing in USB charging topics and their different Charging tecnologys as you think (mobile batterys, chargers and so on).
I had several phones and several chargers and compared nearly all of them (QC, FastCharge, VOOC) and there is absolutely nothing dangerous to charge a phone with a QC charger if it is a supercharge phone.
But .... you ever can prove the contrary. I'll never stop learning but you have to tell me some facts.

Charging with Power Delivery

Do Power Delivery (PD)-only chargers work with the Mi 9T Pro, and if so, at what speeds and which PD version does it support?
Can't really find any tests on this online, I'm surprised it's not standard to be honest -- using one single PD charger for everything is fast becoming the norm.

skleppo said:
Do Power Delivery (PD)-only chargers work with the Mi 9T Pro, and if so, at what speeds and which PD version does it support?
Can't really find any tests on this online, I'm surprised it's not standard to be honest -- using one single PD charger for everything is fast becoming the norm.
Click to expand...
Click to collapse
Yes. Qualcomm QC4+ adheres to PD standards, it's the first time they've done so. Xiaomi haven't used any proprietary charging, they've relied on QC4+ baked on the SD855. You'll get up to 27W charging, depending on the charger and battery level. I find I'm only getting 27W when the battery is very low, normally it's 24W until it's nearing full, but that might be how my charger chooses to deliver the juice.
Not sure what PD version it's using, but I'm sure a Google/Wiki search on Qualcomm QC4+ will provide an answer somewhere.
Edit: a quick look on wiki says that it's PD 3.0

Robbo.5000 said:
Yes. Qualcomm QC4+ adheres to PD standards, it's the first time they've done so. Xiaomi haven't used any proprietary charging, they've relied on QC4+ baked on the SD855. You'll get up to 27W charging, depending on the charger and battery level. I find I'm only getting 27W when the battery is very low, normally it's 24W until it's nearing full, but that might be how my charger chooses to deliver the juice.
Not sure what PD version it's using, but I'm sure a Google/Wiki search on Qualcomm QC4+ will provide an answer somewhere.
Edit: a quick look on wiki says that it's PD 3.0
Click to expand...
Click to collapse
Oh awesome, what charger are you getting those speeds on if I may ask?
You might've just helped me to make my final decision to get the 9T Pro then. The only thing I'm still hesitant about is the lack of HDMI-out and color-notification. If this phone had color notification and HDMI-out... my lord.

skleppo said:
Oh awesome, what charger are you getting those speeds on if I may ask?
You might've just helped me to make my final decision to get the 9T Pro then. The only thing I'm still hesitant about is the lack of HDMI-out and color-notification. If this phone had color notification and HDMI-out... my lord.
Click to expand...
Click to collapse
I went for a bit of a gamble on AliExpress and got this one.
https://s.click.aliexpress.com/e/tGXqRBeY
It was a brand I hadn't heard of but had good reviews and was cheaper than the known brands. So far I'm happy with it, does exactly what it says on the tin.
For the price there's nothing much to complain about, you start adding on all the nice to have extras and suddenly the phone would be half as much again.

Robbo.5000 said:
I went for a bit of a gamble on AliExpress and got this one.
https://s.click.aliexpress.com/e/tGXqRBeY
It was a brand I hadn't heard of but had good reviews and was cheaper than the known brands. So far I'm happy with it, does exactly what it says on the tin.
For the price there's nothing much to complain about, you start adding on all the nice to have extras and suddenly the phone would be half as much again.
Click to expand...
Click to collapse
And you got 24-27w through the USB-C PD port? I guess that must be, since QC3 max is 18 watt right. Grand, thanks for the info!
Not so sure regarding the price, although it's a bit difficult to weight the pros and cons sometimes. Take the Black Shark 2, which is great, aside from the absence of NFC, and no bootloader unlocking, but it's around the same price. Putting a color led in there and HDMI out, that would've made the phone pretty much unbeatable, even if it cost 50 euro or so more. It's definitely making me hesitant to purchase, because what if a 9T Pro equivalent comes out with those two things extra for 50-60 euro more? I would be gutted

skleppo said:
And you got 24-27w through the USB-C PD port? I guess that must be, since QC3 max is 18 watt right.
Click to expand...
Click to collapse
Yes, the QC3 port only delivers 18W max.

I'm resuming this thread because I'm really confused on how get 27w charge on my Mi 9T Pro.
I'm using a UGreen USB-C cable that supports 60W Power Delivery charge with an Aukey 27W power adapter (ADEQ-ES-PA-Y8-B) with PD 3.0. The maximum current I get (verified using Ampere app) is about 3.150mAh which is the same I get using three different Quick Charge 3.0 power adapters, the only difference is when I use the QC3.0 adapters the phone shows "Quick Charge" text on lock screen + double flash symbols on the battery icon and when I use the PD charger I have no text in lock screen but only the double flash symbols on the battery icon.
Does anyone know if the "Turbo charge" is achievable only using the original Xiaomi 27W Charger?

alexmil said:
I'm resuming this thread because I'm really confused on how get 27w charge on my Mi 9T Pro.
I'm using a UGreen USB-C cable that supports 60W Power Delivery charge with an Aukey 27W power adapter (ADEQ-ES-PA-Y8-B) with PD 3.0. The maximum current I get (verified using Ampere app) is about 3.150mAh which is the same I get using three different Quick Charge 3.0 power adapters, the only difference is when I use the QC3.0 adapters the phone shows "Quick Charge" text on lock screen + double flash symbols on the battery icon and when I use the PD charger I have no text in lock screen but only the double flash symbols on the battery icon.
Does anyone know if the "Turbo charge" is achievable only using the original Xiaomi 27W Charger?
Click to expand...
Click to collapse
It's no good looking at only amps. You need to know what voltage is being delivered too.
Watts = volts x amps
I have 2 PD chargers and both charge the phone at the full 27W, when the battery is empty.
I have a 30W PD wall charger which delivers 27W as 12V at 2.25A, but my 30W PD car charger delivers 27W as 9V at 3A

Robbo.5000 said:
It's no good looking at only amps. You need to know what voltage is being delivered too.
Watts = volts x amps
I have 2 PD chargers and both charge the phone at the full 27W, when the battery is empty.
I have a 30W PD wall charger which delivers 27W as 12V at 2.25A, but my 30W PD car charger delivers 27W as 9V at 3A
Click to expand...
Click to collapse
Thanks for your reply. Do you know if there is any chance to read the charging voltage from the phone? Or the only option is use an USB multimeter?

alexmil said:
Thanks for your reply. Do you know if there is any chance to read the charging voltage from the phone? Or the only option is use an USB multimeter?
Click to expand...
Click to collapse
You can get apps which show volts and amps when charging. Search for Ampere in the play store, written by an xda member, I believe.
I'm using Havoc ROM, which shows these on the lock screen when the phone is charging.
However I've seen people say that these may not be accurate and suggest only USB meters give true figures. I've never tried a USB meter, so couldn't say if the figures I see are accurate or not.

33W Charger

Are there any other devices with the same power output? I have various Oneplus chargers, and a couple of Quick charge 3.0, but would like a spare fast charger.

MarkRobert said:
Are there any other devices with the same power output? I have various Oneplus chargers, and a couple of Quick charge 3.0, but would like a spare fast charger.
Click to expand...
Click to collapse
You can buy the xiaomi 27W QC4 charger it does 27-35W

realme x2 pro has 50W, so something there shud fit

I've tried various chargers but the SOC was >85% so it wasn't a proper test. With most charger (QC or PD) I've gotten 15W, including with my 65W PD laptop charger. With the original charger I got 20-22W. If it's important to check the power, I can wait until it's discharged and redo the tests, which I plan to do anyway.
For travelling, I find it a lot more useful to have the 36W (18W QC + 18W PD?) cheap Amazon charger with 2xUSB-A and 1xUSB-C, which has the same size as the original charger: https://smile.amazon.de/gp/product/B07WFDTJFR/

Let us know how you get on. I tried my Samsung 25w charger, Pixel 3 charger and the Motorola 18w charger. All of them charge at 12-18w only. Stock charger goes to around 27w

I've now tried all the chargers and powerbanks that I have, QC3 or PD. All of them cap out at 16W, even though they can deliver more. I got the original one to charge with 30W (at 60% SOC).
The original charger is marked QC3 but they are probably not following the standard.

From my understanding the Snapdragon 732g has Quick Charge 4+ support doesn't it ?

manu1991 said:
Let us know how you get on. I tried my Samsung 25w charger, Pixel 3 charger and the Motorola 18w charger. All of them charge at 12-18w only. Stock charger goes to around 27w
Click to expand...
Click to collapse
Yes, i've noticed the same. Around 27w max. Today i was charging my phone and observing the batt temperature. Kinda obvious, but the hotter the battery gets, the lower charging power it will deliver. Here in Brazil the temp this week is being around 36-42°C, so i put the phone over a bar of artificial ice. As the batt temp went under 35°C, the resultant "charging current" went to around 5500-6000mA. Doing the math, it was possible to arrive at the 27w result. (~4,5V x 6 = 27w).
When the batt temp was near 38~39°C, charging was down to 2000-2800mA (resulting to around 10-12w).
I also found something strange, it wasn't able to show the charging percentage with 2 decimals, as shown in this video:
https://www.youtube.com/watch?v=2Y8ja08uGEQ

Can someone give me a link for a u.s. charger for poco x3 device??

danieliswhattheycallme said:
Can someone give me a link for a u.s. charger for poco x3 device??
Click to expand...
Click to collapse
maybe this?
https://it.aliexpress.com/item/1005001516773316.html?spm=a2g0o.productlist.0.0.221f1870n5uSWW&algo_pvid=e82d72d7-5dac-413a-8e05-1657b2124e88&algo_expid=e82d72d7-5dac-413a-8e05-1657b2124e88-15&btsid=0b0a187916118446027031496e9a4e&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

For me GAN 65W chargers (Baseus) are good and universal quick chargers.
I have made a quick test in the thread Chargers and Charging speed