Hello,
I have bought an Honor 5C, chinese version (NEM-UL10).
Can i flash any of the international (european) roms?
Thank you
Miguel
mjjferreira said:
Hello,
I have bought an Honor 5C, chinese version (NEM-UL10).
Can i flash any of the international (european) roms?
Thank you
Miguel
Click to expand...
Click to collapse
nop, only flash the one intended for ur model no
otherwise u may brick ur device:crying:
It does not work for the model NEM-AL10 3GB RAM, get a brick! AL10-2GB - lost SIM 100%
CHANGE OF THE LOCATION OF CN - EU
for the further ROM installation
To UNBLOCK the LOADER! SURELY!
Using TWRP installed instead "eRecovery" (recovery2) !!!
BACKUP for TWRP is ALSO OBLIGATORY!
(surely drill the status of an unblocking of the loader)
1) We establish hw_EU.zip through TWRP (Using TWRP installed instead "eRecovery" (recovery2)), after installation click reload.
2) The device will not be able to load the system , reboot and launch itself stock recovery, will be reset to factory default settings , you press SHUTDOWN button.
3) Turn on phone. Long start and optimization. Tapping the build number in Settings -> About 7 times, then going back and selecting the option from the Development menu.
Enable "OEM unlock" in the Development menu. So we will have flashing opportunity phone through fastboot if we receive a brick!
4) We throw on the card dload folder with UPDATE.APP firmware file on the region -EU (NEM-L51C432Bxxx), insert the card into the phone turned off , click the three buttons , waiting for the start of the upgrade process and all !!!)))
:good::good:
PS: In my hw_EU.zip archive three files are used:
custom.bin - the file in which contains one record in which belonging to the region - Vendor Country Info is specified
oeminfo - the binary file, contains information on a phone model and on the version of a firmware
build.prop - the system file from a specific firmware
All these three files from the European firmware of NEM-L51
Don't use this archive for change of a location in other phone models of Honor!!!
This archive - it isn't simple to replace a method a location
This archive - preparation of phone for the subsequent updating by a firmware from the European NEM-L51 model
You need to debrand your phone.
DRUGER said:
method has
I made the transition from Russian (European) firmware to the Chinese , and the Chinese in the European , fingerprint scanner is 100 %
CHANGE OF THE LOCATION OF CN - EU
for the further ROM installation
To UNBLOCK the LOADER! SURELY! To establish TWRP!
BACKUP for TWRP is ALSO OBLIGATORY!
(surely drill the status of an unblocking of the loader)
1) We establish hw_EU.zip through TWRP, after installation, we SWITCH OFF phone, you don't reboot!!!!
2) We return stock recovery, we do reboot, the device won't be able to load system, itself to reboot and will start stock recovery, there will be a dumping to factory, press the SHUTDOWN button
3) We turn on the device as usual, minutes 2-3 can hang on HONOR'S prompt, control of system and start of the device will go!
4) In the engineering menu we check vendor, in information about phone model and number of assembly
5) We throw in the dload folder, on a SD card, the firmware file from the region-EU, we insert the card into the switched-off phone, we press three buttons and wait for the update process!!!
Click to expand...
Click to collapse
does this work?????
has anyone tried??
venom007 said:
does this work?????
has anyone tried??
Click to expand...
Click to collapse
Finalize instructions, now all quickly and easily!
tested 100%
DRUGER said:
Finalize instructions, now all quickly and easily!
tested 100%
Click to expand...
Click to collapse
Good job
DRUGER said:
Finalize instructions, now all quickly and easily!
tested 100%
Click to expand...
Click to collapse
thats cool
As it worked for the 5x, it should work on almost any recent honor device, again good job
PalakMi said:
As it worked for the 5x, it should work on almost any recent honor device, again good job
Click to expand...
Click to collapse
I don't advise to use my instruction in other Honor devices for the reason that I used files specifically for NEM model!
it would work on device which has twrp support.
venom007 said:
it would work on device which has twrp support.
Click to expand...
Click to collapse
In my hw_EU.zip archive three files are used:
custom.bin - the file in which contains one record in which belonging to the region - Vendor Country Info is specified
oeminfo - the binary file, contains information on a phone model and on the version of a firmware
build.prop - the system file from a specific firmware
All these three files from the European firmware of NEM-L51
Once again I repeat!!! Don't use this archive for change of a location in other phone models of Honor!!!
This archive - it isn't simple to replace a method a location
This archive - preparation of phone for the subsequent updating by a firmware from the European NEM-L51 model
DRUGER said:
I don't advise to use my instruction in other Honor devices for the reason that I used files specifically for NEM model!
Click to expand...
Click to collapse
Roger that
can I use this method to change my nmo-l31 to the European NEM-L51 model ?
LIONS1 said:
can I use this method to change my nmo-l31 to the European NEM-L51 model ?
Click to expand...
Click to collapse
as said,only for NEM model
LIONS1 said:
can I use this method to change my nmo-l31 to the European NEM-L51 model ?
Click to expand...
Click to collapse
Don't even think about it
Just did this on my NEM-L21, and now I have an NEM-L51 ... So it works just fine
LINJEinc said:
Just did this on my NEM-L21, and now I have an NEM-L51 ... So it works just fine
Click to expand...
Click to collapse
do u have any problems so far after changing???
venom007 said:
do u have any problems so far after changing???
Click to expand...
Click to collapse
No problems so far, but haven't testing so much, have other things to do right now so.
But i will test more tonight after school.
LINJEinc said:
No problems so far, but haven't testing so much, have other things to do right now so.
But i will test more tonight after school.
Click to expand...
Click to collapse
ok, test it and report back
Related
After installing twrp recovery i decided to install SU too. After that my phone is stuck in bootloop, before SU installation it worked just fine (with just the twrp) ;[
So here's my phone info (all i could get):
Model: PRA-LX1 (other ppl place here some diffrent numbers but i dont know where to find them since i cant even start my phone)
FCC ID: QIPRA-LX1
Well if someone could find a stock frimewere (or pre-rooted custom rom that would work on this phone) and give a link to it i would be greatfull couse i searched a lot and i'm still with nothing.
Now im left with empty brick with no OS at all...
Help! ;[
Maybe you should try this, it may find the proper firmware for your device.
Firicel69 said:
Maybe you should try this, it may find the proper firmware for your device.
Click to expand...
Click to collapse
The problem is there are a ton of diffrent versions of this PRA-LX1 and i dont know which one to chose...
Wilchu said:
The problem is there are a ton of diffrent versions of this PRA-LX1 and i dont know which one to chose...
Click to expand...
Click to collapse
Wrong thread mate, open this in P9Lite not in P8Lite
If this is P8 Lite 2017, we have seperate subforum for it :highfive:
D1stRU3T0R said:
Wrong thread mate, open this in P9Lite not in P8Lite
Click to expand...
Click to collapse
... But this is P9 Lite "2017" and what i heard is that this model comes with name of P8 Lite 2017 and if im not wrong there is no P9 Lite "2017" thread just P9 Lite which is completly diffrent device!
Let's do this in a diffrent way...
If there is a person who owns the same phone and the same model PRA-LX1 which is the only thing written on the box,
then i ask you to do a twrp system backup and maybe give the file to me.
Wilchu said:
If there is a person who owns the same phone and the same model PRA-LX1 which is the only thing written on the box,
then i ask you to do a twrp system backup and maybe give the file to me.
Click to expand...
Click to collapse
https://forum.xda-developers.com/huawei-p9lite/development/rom-custom-rokangtex-rom-t3624816
I hope it's working.
D1stRU3T0R said:
https://forum.xda-developers.com/huawei-p9lite/development/rom-custom-rokangtex-rom-t3624816
I hope it's working.
Click to expand...
Click to collapse
Thanks! I'll test it out but i have another question is there a way to install rom through pc maybe couse twrp is acting weird and i dont trust it so much...
To be more precise i get updater error: 7 every time when i try to flash the rom
And after that phone booted but i got encryption error, and cant do much
Wilchu said:
Thanks! I'll test it out but i have another question is there a way to install rom through pc maybe couse twrp is acting weird and i dont trust it so much...
To be more precise i get updater error: 7 every time when i try to flash the rom
(but i will still try tho)
Click to expand...
Click to collapse
Yeah, with flash. Search universal flashboot anf than flash everything in order (these are not the orders, just an ex) flashboot boot boot.img flashboot recovery recovery.img etc(extracted from the zip file, maybr with huawei extractor)
But try to update you're TWRP, either to personas one or OpenKirin's TWRP, you should not have any problem on TWRP 3.1.1-0
Quick update nothing new, nothing works just gonna go to huwaei service room and hope that they can fix this... :[
Wilchu said:
Quick update nothing new, nothing works just gonna go to huwaei service room and hope that they can fix this... :[
Click to expand...
Click to collapse
Did you go to the P8 Lite 2017 thread? I think that device has the same model number
Wilchu said:
Quick update nothing new, nothing works just gonna go to huwaei service room and hope that they can fix this... :[
Click to expand...
Click to collapse
First.. i supose you have TWRP ...
So, if im not wrong, your phone use 3 files to install the firmware ( like P8 Lite 2017 )...
Must be like this:
Download the 3 zip files (update.zip, cust and public data) of the firmware you want to flash and copy them to your phone’s memory.
Unplug the USB cable and power off your device.
Now hold Vol up + Power keys for a few seconds to boot into TWRP mode.
In TWRP, go to Install and flash the update.zip package.
After that, install the remaining two update files (cust and then the public data package).
Wipe the dalvik cache( or do a factory reset ) and then reboot normally into the new system.
Now the ROM... i don´t know where you can find it, sorry ...
.
Good news for chinese firmware
rambik33 said:
Good news for chinese firmware
Click to expand...
Click to collapse
Hello
I took my p9 lite vns-l31c432. OK
I made it go to was-al00c00b240. OK
i reflected huawei's recovery.img stock and i closed the bootloader.
it works properly.
NOW.
I tested ota update with the phone, does not work.
I tested finder does not work.
i tested huawei updater v2.0, does not work.
I tested update on the pc with hisuite, does not work.
I can not register for the beta, I do not have a Chinese phone number, I am in France.
And
of course dload method, sofware install failed!
do you have an idea to try to start it?
Sim is not work?
rambik33 said:
Sim is not work?
Click to expand...
Click to collapse
Yes work
What the ota you try install?
We cant install it right ?
kisvagen said:
We cant install it right ?
Click to expand...
Click to collapse
Yes
Need wait few weeks)
Okay mate thanks for the info my model is : was lx1c432 . Dual sim . Hope the oreo will be better than nougat xd
Chisetdel31260 said:
Hello
I took my p9 lite vns-l31c432. OK
I made it go to was-al00c00b240. OK
i reflected huawei's recovery.img stock and i closed the bootloader.
it works properly.
NOW.
I tested ota update with the phone, does not work.
I tested finder does not work.
i tested huawei updater v2.0, does not work.
I tested update on the pc with hisuite, does not work.
I can not register for the beta, I do not have a Chinese phone number, I am in France.
And
of course dload method, sofware install failed!
do you have an idea to try to start it?
Click to expand...
Click to collapse
Nice try man! Ok, did you try to update b311 using ffinder, or just with beta program? Now, I see that they remove beta b311 from ffinder...
Also, just keep it in mind that Emui 8 change some partitions including recovery sectors. So, we dont have Twrp for emui 8 for our models, and its big posibillity to stuck on some beta emui 8 lets say Al00C00 without any chance to rollback to Emui 5 and destroy partitions, brick your phone trying that. Just wait for custom recovery for Emui 8 for Kirin 658, after that u can do some experiments ?
Regards.
Alexxxx1 said:
Nice try man! Ok, did you try to update b311 using ffinder, or just with beta program? Now, I see that they remove beta b311 from ffinder...
Also, just keep it in mind that Emui 8 change some partitions including recovery sectors. So, we dont have Twrp for emui 8 for our models, and its big posibillity to stuck on some beta emui 8 lets say Al00C00 without any chance to rollback to Emui 5 and destroy partitions, brick your phone trying that. Just wait for custom recovery for Emui 8 for Kirin 658, after that u can do some experiments
Regards.
Click to expand...
Click to collapse
new tests.
Too bad, I tried DC-Phoenix V50 with 15 credits.
to install b331-log, after having restarted the installation 4 or 5 times, he finished installing it completely. I wonder how dc-phoenix can create a new partition.
and that on xda, there is no dev that could create an equivallent toolkit.
But, the p9 lite remains on a black screen, the volume and power buttons do not respond anymore.
no led lights up. But it still remains recognized in fastboot mode.
so, I can always go back to a clean device.
now ım using VTR-L09C432B186 but ı cant flash datafiles in twrp.icons its weird wallpaper is weird.and when ı try rebrand with hwota give me error,phone going to error mode,ı cant reboot fastboot mode,i need to wait discharge then phone is open.how can ı fix that problems?if ı found how flash datafiles in twrp then ı dont need rebrand this phone
What data files do you mean?
Take a look at my HWOTA alternative.
May you try this.
HWOTA and "my" script are working, when the user did everything right. So try my script and tell me, what isn't working.
manual upgrade
Jannomag said:
What data files do you mean?
Take a look at my HWOTA alternative.
May you try this.
HWOTA and "my" script are working, when the user did everything right. So try my script and tell me, what isn't working.
Click to expand...
Click to collapse
Hi Jannomag,
I haven't managed to update from android 7 to android 8 with neither of the two versions. Can you possibly help me
I have already done the following:
- OS = Ubuntu 17.10
- Huawei P10 (VTR-L09) *185 unbranded
- Bootloader unlocked
- Device rooted
Nakedchef said:
Hi Jannomag,
I haven't managed to update from android 7 to android 8 with neither of the two versions. Can you possibly help me
I have already done the following:
- OS = Ubuntu 17.10
- Huawei P10 (VTR-L09) *185 unbranded
- Bootloader unlocked
- Device rooted
Click to expand...
Click to collapse
Okay, I think there was a problem with my tutorial - I wrote "upgrade" not "oreoupgrade" when I mentioned the folder on the sd card. Rename the "upgrade" directory to "oreoupgrade" and you should be good.
REALLY IN NEED FOR HELP:crying:
Followed this guide youtube.com/watch?v=2tAeNZdTyeY to install Resurrection Remix on my P9 EVA-L19. After booting the phone, it is just stuck on the boot animation. I panicked and restored to the stock rom. After booting the device, it gets stuck at the "unlocked bootloader" screen.
So I tried to restore the rom through the eRecovery process but gave me an error.
So then I tried the dload process where I copy the UPDATE.APP to my SD card(FAT32) and failed. it stopped at 5% and said "Software install failed!"
I really don't know what to do next.
Any suggestions will be highly appreciated.
Thanks.
Béresford_G said:
REALLY IN NEED FOR HELP:crying:
Followed this guide youtube.com/watch?v=2tAeNZdTyeY to install Resurrection Remix on my P9 EVA-L19. After booting the phone, it is just stuck on the boot animation. I panicked and restored to the stock rom. After booting the device, it gets stuck at the "unlocked bootloader" screen.
So I tried to restore the rom through the eRecovery process but gave me an error.
So then I tried the dload process where I copy the UPDATE.APP to my SD card(FAT32) and failed. it stopped at 5% and said "Software install failed!"
I really don't know what to do next.
Any suggestions will be highly appreciated.
Thanks.
Click to expand...
Click to collapse
There is a RR thread for P9, I'd suggesr to ask there about the RR installation and issues (these topics opened under Q&A practically nobody reads, specially not those few who know more about RR)
https://forum.xda-developers.com/p9/development/rom-t3767344
For safe reverting back to stock you should have used HWOTA method (maybe it will still work if your Bootloader is unlocked and/or you have TWRP for EMUI 5.x)
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3
zgfg said:
There is a RR thread for P9, I'd suggesr to ask there about the RR installation and issues (these topics opened under Q&A practically nobody reads, specially not those few who know more about RR)
https://forum.xda-developers.com/p9/development/rom-t3767344
For safe reverting back to stock you should have used HWOTA method (maybe it will still work if your Bootloader is unlocked and/or you have TWRP for EMUI 5.x)
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3
Click to expand...
Click to collapse
thanks for the links. How can I find out my phone model name and cust number. I already know that it is the EVA-L19 version but I dont know the cust number due to the fact that I cant boot.
Béresford_G said:
thanks for the links. How can I find out my phone model name and cust number. I already know that it is the EVA-L19 version but I dont know the cust number due to the fact that I cant boot.
Click to expand...
Click to collapse
I don't know if that is possible, I know it's too late now but whenever I'm going to play with ROMs or so, I save screenshots of my Settings/About and all things like that (IMEI, etc), just in case (like this case).
Maybe you can figure out by:
- was it International cust c432, Mideast c185, or provided by some operator, see
https://www.huaweiblog.de/firmware-update-was-bedeutet-cust-emui-und-co/
- have you debranded the phone
- btw, before installing RR did you check if RR is compatible to install over your (at that time) stock ROM
- Have you installed a firmware from FirmwareFinder, by DLOAD, HWOTA or other methods
Eg, if it was c432 and if you did not manually update, it was likely b393 as the last approved build for L19
zgfg said:
I don't know if that is possible, I know it's too late now but whenever I'm going to play with ROMs or so, I save screenshots of my Settings/About and all things like that (IMEI, etc), just in case (like this case).
Maybe you can figure out by:
- was it International cust c432, Mideast c185, or provided by some operator, see
https://www.huaweiblog.de/firmware-update-was-bedeutet-cust-emui-und-co/
- have you debranded the phone
- btw, before installing RR did you check if RR is compatible to install over your (at that time) stock ROM
- Have you installed a firmware from FirmwareFinder, by DLOAD, HWOTA or other methods
Eg, if it was c432 and if you did not manually update, it was likely b393 as the last approved build for L19
Click to expand...
Click to collapse
I fixed the phone! I used the link u shared about the HWOTA and followed the steps. I did a lot of research about the model number and the cust and found out on the Huawei site that my phone is the EVA-19C185. So I installed the update and it worked! Thank you so much for your help. Really appreciate it.
Béresford_G said:
I fixed the phone! I used the link u shared about the HWOTA and followed the steps. I did a lot of research about the model number and the cust and found out on the Huawei site that my phone is the EVA-19C185. So I installed the update and it worked! Thank you so much for your help. Really appreciate it.
Click to expand...
Click to collapse
Ok - good. Please help to others when they will simlarly seek for help
zgfg said:
Ok - good. Please help to others when they will simlarly seek for help
Click to expand...
Click to collapse
Hi There, i followed the same link and instructions, i was in RR 7.1.2 and didnt rember witch version i had before updating to it. i've downloaded the eva-l09 c342 b394 (wich seemed to me similir or identical by memory) i'v done the folder in the correct way. lauched trwp installed the script, it opened what it was suposed to but as soon i got to 57% the phone rebooted.. and now doesnt go beyond a dark screen after the logo. i'm able to open the erecovery and fastboot mode . what do i have to do now? install trp? bootloader its stil unlocked.
Hi All,
Please anyone advise me how to upgrade my Huawei P9 EVA L19. I'm from Sri Lanka.
My device version is C185B162 ( EMUI 4.1 ) which needs to upgrade Nougat ( Android 7).
If not possible, please let me know the best stable edition for this phone.
Many Thanks in advance.
Aselaj
aselaj said:
Hi All,
Please anyone advise me how to upgrade my Huawei P9 EVA L19. I'm from Sri Lanka.
My device version is C185B162 ( EMUI 4.1 ) which needs to upgrade Nougat ( Android 7).
If not possible, please let me know the best stable edition for this phone.
Many Thanks in advance.
Aselaj
Click to expand...
Click to collapse
For OTA, you must have a proper SIM card and WiFi connection - check in Settings/Software update do you receive OTA
Also, install latest HiSuite to PC, connect to the phone and find in HiSuite (at the bottom) an option to update.
Not sure, but also better have a valid SIM card in the phone
There are other options but first try these simplest and less intrusive ones
Ofc, supposing that phone is not rooted or TWRP installed (ie - must be the stock firmware)
Thanks...
zgfg said:
For OTA, you must have a proper SIM card and WiFi connection - check in Settings/Software update do you receive OTA
Also, install latest HiSuite to PC, connect to the phone and find in HiSuite (at the bottom) an option to update.
Not sure, but also better have a valid SIM card in the phone
There are other options but first try these simplest and less intrusive ones
Ofc, supposing that phone is not rooted or TWRP installed (ie - must be the stock firmware)
Click to expand...
Click to collapse
many Thanks for the advices.
Yes. phone is not rooted. I have tried both above ways & not getting update. So i thought to use other way ( dload) & try.
Please let me know the correct update package so i can download & push via SD card.
Is it risky to use that method...??
Also please tell me if upgrade would caused to any other issue such as battery draining issue.. If so how can i downgrade the version.?
many thanks...
aselaj said:
many Thanks for the advices.
Yes. phone is not rooted. I have tried both above ways & not getting update. So i thought to use other way ( dload) & try.
Please let me know the correct update package so i can download & push via SD card.
Is it risky to use that method...??
Also please tell me if upgrade would caused to any other issue such as battery draining issue.. If so how can i downgrade the version.?
many thanks...
Click to expand...
Click to collapse
You can DLOAD to L19 c185 b385 (initial Nougat), you must take FullOTA-MF-PV (PV is important) - as on the screenshot, from:
https://pro-teammt.ru/firmware-database/?firmware_model=EVA-L19c185
You can also install FirmwareFinder app (from Playstore or XDA) to download from the app
Download the two files, update.zip and update_data_full_hw_meafnaf.zip, do not unzip, put into DLOAD folder on your SD card.
Phone better to be charged, switch off, disconnect USB, press and keep pressing both Vol+ and Vol-, then boot - it should start DLOAD
Boot and login to system, and check if you can receive further OTA updates
Many thanks...
zgfg said:
You can DLOAD to L19 c185 b385 (initial Nougat), you must take FullOTA-MF-PV (PV is important) - as on the screenshot, from:
https://pro-teammt.ru/firmware-database/?firmware_model=EVA-L19c185
You can also install FirmwareFinder app (from Playstore or XDA) to download from the app
Download the two files, update.zip and update_data_full_hw_meafnaf.zip, do not unzip, put into DLOAD folder on your SD card.
Phone better to be charged, switch off, disconnect USB, press and keep pressing both Vol+ and Vol-, then boot - it should start DLOAD
Boot and login to system, and check if you can receive further OTA updates
Click to expand...
Click to collapse
Hi..
Many thanks for the valuable information.
I will try this way....
aselaj said:
Hi..
Many thanks for the valuable information.
I will try this way....
Click to expand...
Click to collapse
If you don't receive further OTA update, you can force DLOAD up to the latestEVA-L19c185b403
Download:
https://androidhost.ru/bN4
Unzip/untar until you extract a dload folder (do not extract further) and ReleaseDoc folder.
In the latter find Software Upgrade Guide and follow it - basically, you copy dload folder to your SD card and repeat the DLOAD method
zgfg said:
You can DLOAD to L19 c185 b385 (initial Nougat), you must take FullOTA-MF-PV (PV is important) - as on the screenshot, from:
https://pro-teammt.ru/firmware-database/?firmware_model=EVA-L19c185
You can also install FirmwareFinder app (from Playstore or XDA) to download from the app
Download the two files, update.zip and update_data_full_hw_meafnaf.zip, do not unzip, put into DLOAD folder on your SD card.
Phone better to be charged, switch off, disconnect USB, press and keep pressing both Vol+ and Vol-, then boot - it should start DLOAD
Boot and login to system, and check if you can receive further OTA updates
Click to expand...
Click to collapse
Hi..
Its unable to retrieve the file from above link. https://pro-teammt.ru/firmware-database/?firmware_model=EVA-L19c185
Can you please provide another active link to download L19 c185 b385 (initial Nougat) file.
Many Thanks.
aselaj said:
Hi..
Its unable to retrieve the file from above link. https://pro-teammt.ru/firmware-database/?firmware_model=EVA-L19c185
Can you please provide another active link to download L19 c185 b385 (initial Nougat) file.
Many Thanks.
Click to expand...
Click to collapse
Just downloaded update.zip (1.33 GB) and update_data_full_hw_meafnaf.zip (865.19 MB) with no problem - EVA-L19c185b385 FullOTA-MF-PV (80560)
Maybe download failed to you because of not-reliable WiFi connection.
Try using ADM browser - it downloads a big file in parallel chunks and it can resume download upon connection breaks
zgfg said:
Just downloaded update.zip (1.33 GB) and update_data_full_hw_meafnaf.zip (865.19 MB) with no problem - EVA-L19c185b385 FullOTA-MF-PV (80560)
Maybe download failed to you because of not-reliable WiFi connection.
Try using ADM browser - it downloads a big file in parallel chunks and it can resume download upon connection breaks
Click to expand...
Click to collapse
hi.
when i trying to download error shows as the attached image.
i tried with laptop & mobile phone as well. both showing same error.
please advise.
thanks
aselaj said:
Hi All,
Please anyone advise me how to upgrade my Huawei P9 EVA L19. I'm from Sri Lanka.
My device version is C185B162 ( EMUI 4.1 ) which needs to upgrade Nougat ( Android 7).
If not possible, please let me know the best stable edition for this phone.
Many Thanks in advance.
Aselaj
Click to expand...
Click to collapse
Same issue, expext when i dload i get software install error not compatible with current version
aselaj said:
hi.
when i trying to download error shows as the attached image.
i tried with laptop & mobile phone as well. both showing same error.
please advise.
thanks
Click to expand...
Click to collapse
Same
Apher said:
Same issue, expext when i dload i get software install error not compatible with current version
Click to expand...
Click to collapse
You are not downloading correctly
Select package as on the first screenshot.
Click on Update files - FILELIST.
In the popup you will have links to download zip files, this is what you have to downliad, not xml.
Copy one by one link to ADM Browse (all from mobile phone) and download.
Don't know how to help you otherwise
zgfg said:
You are not downloading correctly
Select package as on the first screenshot.
Click on Update files - FILELIST.
In the popup you will have links to download zip files, this is what you have to downliad, not xml.
Copy one by one link to ADM Browse (all from mobile phone) and download.
Don't know how to help you otherwise
Click to expand...
Click to collapse
Do i download all of them or just update.zip?
---------- Post added at 01:34 PM ---------- Previous post was at 01:28 PM ----------
Apher said:
Do i download all of them or just update.zip?
Click to expand...
Click to collapse
Also is there one for eva-l09 i have single sim model
Apher said:
Do i download all of them or just update.zip?
---------- Post added at 01:34 PM ---------- Previous post was at 01:28 PM ----------
Also is there one for eva-l09 i have single sim model
Click to expand...
Click to collapse
Ok nvm i found one for my model
Apher said:
Do i download all of them or just update.zip?
---------- Post added at 01:34 PM ---------- Previous post was at 01:28 PM ----------
Also is there one for eva-l09 i have single sim model
Click to expand...
Click to collapse
You have to download and use for DLOAD both update.zip and update_data_full_hw_meafnaf.zip (both files must be put as is into the DLOAD folder)
Some packages may even have three update***.zip files for DLOAD
Generally, judge by names, if package name shows both L09 and L19 and if you see in the filelist two files with the same names except that one contains L09 in its name, the other L19 in its name, then (for your L19) forget that with L19 in the name.
This package, as the name clearly says is for EVA-L19c185 not for some MHA, L19, c432 or else
In the OP post it was asked for EVA-L19c185
You came later, if you have different phone you have to go to the top of the page and instead of EVA-L19c185 enter EVA-L09c432 or exactly what is your model and cust (based on Settings/About)
Then press Find my model.
Only FullOTA-MF-PV packages are for DLOAD
zgfg said:
You have to download and use for DLOAD both update.zip and update_data_full_hw_meafnaf.zip (both files must be put as is into the DLOAD folder)
Some packages may even have three update***.zip files for DLOAD
Generally, judge by names, if package name shows both L09 and L19 and if you see in the filelist two files with the same names except that one contains L09 in its name, the other L19 in its name, then (for your L19) forget that with L19 in the name.
This package, as the name clearly says is for EVA-L19c185 not for some MHA, L19, c432 or else
In the OP post it was asked for EVA-L19c185
You came later, if you have different phone you have to go to the top of the page and instead of EVA-L19c185 enter EVA-L09c432 or exactly what is your model and cust (based on Settings/About)
Then press Find my model.
Only FullOTA-MF-PV packages are for DLOAD
Click to expand...
Click to collapse
So i downloaded firmware which says its FullOTA-MF-PV but when i flash i get incompability with current version error
Apher said:
So i downloaded firmware which says its FullOTA-MF-PV but when i flash i get incompability with current version error
Click to expand...
Click to collapse
By "flashing" do you mean DLOAD or what?
With DLOAD you cannot do rebranding by going from eg c185 to c432 or so - for that Bootloader must be unlocked and other methods used
What is exactly the full EMUI name and number, best please attach screenshot from Settings/About.
And what do you want to install
If you just want to update to the latest for your model and cust, did first try OTA (both SiM and WiFi must be on), and did you try updating by HiSuite (in the app on the PC find in the bottom Install or Update, not sure how is it named)
zgfg said:
By "flashing" do you mean DLOAD or what?
With DLOAD you cannot do rebranding by going from eg c185 to c432 or so - for that Bootloader must be unlocked and other methods used
What is exactly the full EMUI name and number, best please attach screenshot from Settings/About.
And what do you want to install
If you just want to update to the latest for your model and cust, did first try OTA (both SiM and WiFi must be on), and did you try updating by HiSuite (in the app on the PC find in the bottom Install or Update, not sure how is it named)
Click to expand...
Click to collapse
I originaly had C555 but now i have C900 and i flash with dload and i try dloading C555 firmware
Apher said:
I originaly had C555 but now i have C900 and i flash with dload and i try dloading C555 firmware
Click to expand...
Click to collapse
With c900 there are no OTAs (maybe) and no FullOTA-MF-PV firmwares for DLOAD
Going to different cXXX means rebranding and requires the unlocked Bootloader
I don't see firmwares for EVA-L09c555, only for c55.
But from the other post you tried to download L09GBRc555 - frankly, I don't know what's that (3UK H3G?)
Probably rebranding to c432 would be the best choice (with unlocked Bootloader but not with simple DLOAD - it would brick the phone)
zgfg said:
With c900 there are no OTAs (maybe) and no FullOTA-MF-PV firmwares for DLOAD
Going to different cXXX means rebranding and requires the unlocked Bootloader
I don't see firmwares for EVA-L09c555, only for c55.
But from the other post you tried to download L09GBRc555 - frankly, I don't know what's that (3UK H3G?)
Probably rebranding to c432 would be the best choice (with unlocked Bootloader but not with simple DLOAD - it would brick the phone)
Click to expand...
Click to collapse
The folks at telegram told me to testpoint my phone and flash board firmware and flash oeminfo using that, and im gonna use it so i can rebrand to EVA-AL10 so i can have emui 8, i used board firmware before since i hard bricked my p9 before