Replacement battery - Nexus 6 Q&A, Help & Troubleshooting

Use this thread to share vendors that have either sold you good batteries or bad ones. I have completed a battery swap in my N6 and the process is really rather easy assuming you have all the correct tools. The process from start to new battery installation can be found here:
https://www.ifixit.com/Guide/Nexus+6+Battery+Replacement/35878
One thing to add that is not listed in the guide is to make sure to preshape the battery to match that of the factory installed battery. If this is not done, it could impact functionality of the phone such as camera not working and also the flash. The battery is rather soft and is easy to manipulate into the correct curvature.
The battery that I have installed is a Motorola battery that was sold by the following eBay vendor:
http://www.ebay.com/itm/232047178752
I have only tested this battery for a full day and 2 charge cycles. I will update this post if the battery doesn't end up working out.

SFG said:
Has anybody found a good source for replacement batteries? I see them listed on amazon and eBay for around $25. I've read some mixed reviews.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
I bought and installed this one last week:
http://www.ebay.com/itm/232047178752
It has identical markings to the original battery and seems to be working great so far.

neilrl79 said:
I bought and installed this one last week:
http://www.ebay.com/itm/232047178752
It has identical markings to the original battery and seems to be working great so far.
Click to expand...
Click to collapse
So no issues with the battery not charging to 100℅ or not charging at all?
Sent from my Nexus 6 using Tapatalk

SFG said:
So no issues with the battery not charging to 100℅ or not charging at all?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
No issues at all. Installed it last Friday and it charges all the way up and seems to last better than the original ever did (I bought the phone used a year ago).

Alright I purchased it. Hopefully I get the same results
Sent from my Nexus 6 using Tapatalk

Actually I did have an issue with my camera not working after initially installing it but now I'm sure that it was caused by the actual installation then the battery.
If you do change your your battery make sure you take note of exactly how it's mounted. The new battery comes flat but the battery sits in the phone with a bit of curvature to it. My problem resolved itself, assuming the battery settled into place and allowed the camera module to contact the board properly.

Well I wish you had said that earlier. ? Guess I will have to take my time and be thorough. Besides the basic plastic pry tools and mini torx, what else do I need? Is there any adhesion materials that need to be replaced?
Sent from my Nexus 6 using Tapatalk

SFG said:
Well I wish you had said that earlier. ? Guess I will have to take my time and be thorough. Besides the basic plastic pry tools and mini torx, what else do I need? Is there any adhesion materials that need to be replaced?
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Like I said, I think it was my lack of attention to details that caused my issue. I had a bought a new back cover a few weeks ago that came with new adhesive already on it, but you can buy just the adhesive. Here is a link:
http://www.ebay.com/itm/141334618840
Though at the price you will pay for just the adhesive, a couple $ more will get you a brand new back cover. Just do some searching and you may find it cheaper, I just shared one of the first results.

I'll be following this breakdown in case anybody else is looking into it. I'll report if it's accurate after I complete the swap.
https://www.ifixit.com/Guide/Nexus+6+Battery+Replacement/35878
Sent from my Nexus 6 using Tapatalk

X2 battery is compartible and cheap, but lasts 1/3 less

Vivjen said:
X2 battery is compartible and cheap, but lasts 1/3 less
Click to expand...
Click to collapse
Sounds like the battery that I don't want
Sent from my Nexus 6 using Tapatalk

what battery do you recommend to buy?

thetransit123 said:
what battery do you recommend to buy?
Click to expand...
Click to collapse
I ordered the one linked in post #2. I'll report on it after I receive it and get it installed.
Sent from my Nexus 6 using Tapatalk

SFG said:
I ordered the one linked in post #2. I'll report on it after I receive it and get it installed.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Looking forward to hearing your results. Did you also order a replacement back cover?

Tikerz said:
Looking forward to hearing your results. Did you also order a replacement back cover?
Click to expand...
Click to collapse
No I did not find the need to do so. My back cover has seen minimal daylight outside of a case.
Sent from my Nexus 6 using Tapatalk

SFG said:
No I did not find the need to do so. My back cover has seen minimal daylight outside of a case.
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Oh, okay I was asking because of the adhesive question earlier. Thanks.

Tikerz said:
Oh, okay I was asking because of the adhesive question earlier. Thanks.
Click to expand...
Click to collapse
According to the link I posted about the breakdown to replace the battery, it didn't mention it so I will tackle that issue if it becomes a problem. Hopefully it's not an issue.
Sent from my Nexus 6 using Tapatalk

I just replaced my battery 24 hours ago with this one (did a frame swap and battery replacement)
http://www.ebay.com/itm/231879248130
I haven't had any problems yet. I'm glad I read this thread and sort of prebent the battery. I didn't have an issue with the camera or flash not working. I did strip 4 screws, but they came out with a t4 bit. I reused my blue back, even though I switched my frame for the silver one. I reheated it back up and I've been running without a case for 24 hours and it hasn't come off yet.

Did you use heat to prebend the battery?
Sent from my Nexus 6 using Tapatalk

SFG said:
Did you use heat to prebend the battery?
Click to expand...
Click to collapse
No I just bent edges slightly like the original battery. I didn't want to bend it too much and ruin it

Related

confirmed: Behold II, Moment, Omnia battery works, Extended Battery, Wall Charger

Anyone seen any extra batteries and external battery chargers? I need this to survive . I'm a battery swapper: I don't support being tied down by walls
EDIT:
Badda bing:
http://www.cellphoneshop.net/m850desktop.html
Badda boom:
http://www.amazon.com/Samsung-Stand..._1_7?s=wireless&ie=UTF8&qid=1292545002&sr=1-7
I am SO with you!
My N1 and Captivate both have two extra batteries and I can't stand waiting around for my phone to charge. That was the first thing I looked into at 8:03 this morning and haven't found anything. I can't even find a decent case... The plastic phone worries me.. At least bestskinsever are shipping them by the 20th
Oh dude the plastic is solid. I've dropped a Vibrant to death and it's still hot smokin safe. The only plastic part anyways is the battery cover, which can be easily replaced in the future.
confirmed: Behold II and moment battery works
I posted a question about the battery.
I have a battery used with Behold II and it just fits (same model number) and I am using it.
Whoaaaaaaaaaaa. Good find.
Badda bing:
http://www.cellphoneshop.net/m850desktop.html
Badda boom:
http://www.amazon.com/Samsung-Stand..._1_7?s=wireless&ie=UTF8&qid=1292545002&sr=1-7
any of those larger capacity than the stock one now?
Are u sure that it will work for ns? Doesn't list it as compatible...... hmmm I want one too screw cords lol
Edit :
Nvm read post in thread where its confirmed that behold battery works. Nice.
Sent from my Nexus S using XDA App
Just make sure you buy the 1500mAh one.
http://cgi.ebay.com/Black-Portable-...Accessories&hash=item2eb01414b5#ht_2039wt_905
Haven't seen any extended batteries while Googling, but the OEM's are about $7 a pop:
http://www.amazon.com/Samsung-Stand..._1_1?s=wireless&ie=UTF8&qid=1292705451&sr=1-1
mingkee said:
I posted a question about the battery.
I have a battery used with Behold II and it just fits (same model number) and I am using it.
Click to expand...
Click to collapse
1500mah? idk. might damage the device
I mean, if those batteries on amazon are the EXACT SAME (1500mah) then i'll buy two, no questions asked.
Anderdroid said:
Badda bing:
http://www.cellphoneshop.net/m850desktop.html
Badda boom:
http://www.amazon.com/Samsung-Stand..._1_7?s=wireless&ie=UTF8&qid=1292545002&sr=1-7
Click to expand...
Click to collapse
The battery on Amazon says 5,48Wh whereas mine syas 5,55Wh. I'm not sure what the difference is, but I'd rather get one that's the exact same.
zachthemaster said:
1500mah? idk. might damage the device
Click to expand...
Click to collapse
No problem at all.
They're original batteries used with Behold II. I did a careful research to make sure the battery is compatible.
mingkee said:
No problem at all.
They're original batteries used with Behold II. I did a careful research to make sure the battery is compatible.
Click to expand...
Click to collapse
Thank you for doing research. I'm buying 2 right now.
Sent from my Nexus S
I actually ended up getting one on eBay because that one wasn't shipping for a week and I'm in a hurry Can't stand walls
Thanks, just added to my Amazon wish list for after I financially recover from Christmas.
Sent from my Nexus S using XDA App
Same here. Hopefully they don't jack up the price. I wasn't even supposed to gethis phone lol.... but I couldn't resist!
Sent from my Nexus S
I just got the 2 battery I bought from amazon. The good news is it works perfectly. The bad news is it is only 1440 mAh.

[Video] How I installed EB40 battery in my Atrix HD

A few people wanted to see the video of how to do that mod I decided to capture my experience. It took about 40 min total, but I edited out some parts that were not important or was just me looking for tools and trying different things. For example it took me some time and effort to remove the original battery and I found that using a plastic card like credit card to pry it of is the best way to do it.
I've been using the information from xda for awhile so it's my time to give something back I hope it helps someone on this forum.
There is no sound on purpose. ( I hate when I look at someones video and hear their stupid comments or weird sounds while they doing something I think it's self explanatory, but if you have questions please ask and I'll try to post comments in the video.
Here it is. Don't be to harsh on me, it was my first attempt
I also suggest to read this thread which was an inspiration for my endeavor:
http://forum.xda-developers.com/showthread.php?t=1906371
Good luck.
Oh hell no, doing it without cutting the plastic is just plain butchering.
Just because its *possible* to fold the battery like clay, doesnt mean you *should* do it, damn!
souljaboy said:
Oh hell no, doing it without cutting the plastic is just plain butchering.
Just because its *possible* to fold the battery like clay, doesnt mean you *should* do it, damn!
Click to expand...
Click to collapse
Well it's a bit unclear, but I made about eights of an inch cut in plastic on both sides of the battery which allows it to bend up and provides the room for the battery without cutting out plastic completely
See video at 12:25
Or you could just take the phone apart and place the battery under the plastic.......
Sent from my MB886 using Tapatalk 2
Thanks for the video, but would it be possible for you to upload the video in HD? It's very blurry.
SirHoover2010 said:
Or you could just take the phone apart and place the battery under the plastic.......
Sent from my MB886 using Tapatalk 2
Click to expand...
Click to collapse
he actually does take the black frame off
I was talking to the person that said you should cut
Sent from my MB886 using Tapatalk 2
SirHoover2010 said:
I was talking to the person that said you should cut
Sent from my MB886 using Tapatalk 2
Click to expand...
Click to collapse
Ah
Removing the frame is the easiest part. The back is a pita
Sent from my HTC Glacier
davwman said:
Removing the frame is the easiest part. The back is a pita
Sent from my HTC Glacier
Click to expand...
Click to collapse
If you have the proper tools, the entire procedure is a breeze.
Professional tear-down video here
Ok, maybe I missed it, but what does this get you? Is the replacement significantly better?
capran said:
Ok, maybe I missed it, but what does this get you? Is the replacement significantly better?
Click to expand...
Click to collapse
ya think? lol
http://forum.xda-developers.com/showthread.php?t=1906371&page=27
2 1/2 days on a single charge? Wow. I'm lucky if I get maybe 9 hours before it complains of low bat. My AHD has the Bell ROM so the battery preference page doesn't track usage.
capran said:
2 1/2 days on a single charge? Wow. I'm lucky if I get maybe 9 hours before it complains of low bat. My AHD has the Bell ROM so the battery preference page doesn't track usage.
Click to expand...
Click to collapse
Install the EB-40 battery. It's an easy DIY, root, and recalibrate battery (using the app from the Play Store) after charging to 100%.

S4 Active(i9295 and i537) Replacement Parts Page

Please help me keep track of replacement parts for this phone. So far I have found:
LCD + Digitizer
OEM Battery Samsung
OEM Battery from eTrade(cheaper)
2A OEM Charger
Rear Housing Sapphire
Rear Housing Grey
Back Camera Module
Flex cable with SIM holder and wireless charging pins
Flex cable with charging port and mic
How to take it apart
Do this at your own risk, remember that you have 1 year warranty, you should first try getting samsung or AT&T to replace.
Would be great if a replacement back was available. I contacted Samsung and they said one is not available and do not have an ETA when it will be.
jeremy1701 said:
Would be great if a replacement back was available. I contacted Samsung and they said one is not available and do not have an ETA when it will be.
Click to expand...
Click to collapse
hopefully soon. I would prefer a wireless charging back with the seal
joshuadjohnson22 said:
Please help me keep track of replacement parts for this phone. So far I have found:
LCD + Digitizer
OEM Battery
2A OEM Charger
Click to expand...
Click to collapse
Even though it's not directly from Samsung, this battery is from the same website as the LCD + Digitizer and it only costs $15. It might be worth posting.
Devo7v said:
Even though it's not directly from Samsung, this battery is from the same website as the LCD + Digitizer and it only costs $15. It might be worth posting.
Click to expand...
Click to collapse
added, thanks
I'm on my second s4 now. My first one's USB port died.
I wonder if that's something that would be possible for mere mortals to fix...
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Dannar said:
I'm on my second s4 now. My first one's USB port died.
I wonder if that's something that would be possible for mere mortals to fix...
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
yeah that looks easy to replace.
For the i337 here is the part http://www.etradesupply.com/oem-samsung-galaxy-s4-sgh-i337-charging-port-flex-cable-ribbon.html
You guys are so lucky LCD and digitizer for the active is dirt cheap haha
Sent from my GT-I9505G using Tapatalk 4 Beta
joshuadjohnson22, I found genuine battery covers for anyone that needs it. A bit pricey, but it is all I've seen so far.
http://www.ebay.com/itm/Genuine-Sam...K_Replacement_Parts_Tools&hash=item5d420fce4f
mrmartin86 said:
joshuadjohnson22, I found genuine battery covers for anyone that needs it. A bit pricey, but it is all I've seen so far.
http://www.ebay.com/itm/Genuine-Sam...K_Replacement_Parts_Tools&hash=item5d420fce4f
Click to expand...
Click to collapse
Thanks, if someone makes an offer and the seller approves please tell us the amount
*updated with rear housing*
Updated with more content
Amazon has the 2amp charger for 9 bucks 3" cord witch I like
Sent from my SAMSUNG-SGH-I537
Would be cool if the camera module was swappable with the i9500, hey at least I can dream!
robstunner said:
Would be cool if the camera module was swappable with the i9500, hey at least I can dream!
Click to expand...
Click to collapse
Yeah, if the connectors are the same it would be a simple driver change. We would need a little help but it would be possible. We do not know if they are the same.
tanasczn said:
I contacted Samsung and they said one is not available and do not have an ETA when it will be.
Click to expand...
Click to collapse
one? What are you referring to?
joshuadjohnson22 said:
Yeah, if the connectors are the same it would be a simple driver change. We would need a little help but it would be possible. We do not know if they are
Click to expand...
Click to collapse
Yea, I completely disassembled the s4a already, it's very easy and zedomax has a great tutorial on YouTube, then only problem is two fold. Does it if and is it waterproof
Sent from my SAMSUNG-SGH-I537 using Tapatalk 4 Beta
robstunner said:
Yea, I completely disassembled the s4a already, it's very easy and zedomax has a great tutorial on YouTube, then only problem is two fold. Does it if and is it waterproof
Sent from my SAMSUNG-SGH-I537 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Exactly, if it doesn't fit you can buy a replacement back for around 11 (see op) and try to modify and seal. May take some work but it would be sweet!
Sent from my SAMSUNG-SGH-I537 using Tapatalk 4
thx
joshuadjohnson22 said:
Exactly, if it doesn't fit you can buy a replacement back for around 11 (see op) and try to modify and seal. May take some work but it would be sweet!
Sent from my SAMSUNG-SGH-I537 using Tapatalk 4
Click to expand...
Click to collapse
I wonder if the waterproofing is part of the camera though
Sent from my SAMSUNG-SGH-I537 using Tapatalk 4 Beta
robstunner said:
I wonder if the waterproofing is part of the camera though
Sent from my SAMSUNG-SGH-I537 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Only one way to find out
If you can get a replacement housing and a s4 camera sensor and then mod them together... I would use some type of sealant and put it around the edge of the sensor and take a drop of water and see if it gets past the housing. Of course do this before putting your system board in the housing... Just as a test. Not sure if it is worth it to you but if we could successfully mod the S4 camera on the active and keep water proof I think most active users will do it. It appears that samsung thought about using the 13 mp sensor but changed their minds because of supply demands.
If I had some extra money I would give it a shot. But my wife would get mad for me tossing out around 30-50 bucks for just a chance of a working mod. any unmarried people out there willing to try?
Sent from my SAMSUNG-SGH-I537 using Tapatalk 4

Loose earpiece grill

The ear piece grill on mine is loose. Checked my note 3 and it's not the same. Check yours just in case. I may sound a bit picky but I just spent $749 + tax on this. Gonna get it exchanged.
Sent from my SM-N900T using Tapatalk
Will t-mobile even exchange for that?
the one on my Note 2 kinda does that. but i never noticed until now until you brought it up. hmm...guess it didn't bother me or it didn't really cause a problem.
the one on my Note 3 on the other hand....it's rock solid. like welded into place.
browniegirl said:
Will t-mobile even exchange for that?
Click to expand...
Click to collapse
They will but you would have to send it back since it was purchased online.
Kawaisa said:
They will but you would have to send it back since it was purchased online.
Click to expand...
Click to collapse
Sounds more of a pain than what it's worth.
browniegirl said:
Will t-mobile even exchange for that?
Click to expand...
Click to collapse
I'm sure they will. The only problem is, will they have some in stock
Sent from my SM-P600 using Tapatalk
I wouldnt mind it so much if it stayed balanced. But its higher on 1 side and it's bugging the heck out of me.
Sent from my SM-P600 using Tapatalk
Kawaisa said:
They will but you would have to send it back since it was purchased online.
Click to expand...
Click to collapse
Yes you do have to send it back but after you get the replacement. I've done exchanges with them before. They've sent me a replacement but they have to put a charge on the account. If the defective one doesn't come back then they don't remove the charge.
Sent from my SM-P600 using Tapatalk
aznmode said:
I'm sure they will. The only problem is, will they have some in stock
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Will you be okay with it for the next 4+days ? I don't know if they will, in the cities I've lived in all sold out of note 2and 3 within 2hrs and my town is small
aznmode said:
I wouldnt mind it so much if it stayed balanced. But its higher on 1 side and it's bugging the heck out of me.
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
is higher on the left side... I noticed that too...
man... to be honest... I completely understand your felling and frustration... even a small imperfection like this can make me crazy too. In my case I always inspect the screen looking for dead pixels (I usually install dead pixels app from the store)... and I have returned many phones because of this. (Including Note 3) In other words... like you mentioned... is your money, and if you are not 100% happy... return it... better live a week or 2 without the Note 4 than a year or more with the problem in your mind every single day...
browniegirl said:
Will you be okay with it for the next 4+days ? I don't know if they will, in the cities I've lived in all sold out of note 2and 3 within 2hrs and my town is small
Click to expand...
Click to collapse
Ya I'll be fine as long as it gets replaced. But since I bought online they will have different stock status than stores. Hopefully they've reserved some for replacements. I'll find out in a few.
Sent from my SM-P600 using Tapatalk
TEKHD said:
is higher on the left side... I noticed that too...
man... to be honest... I completely understand your felling and frustration... even a small imperfection like this can make me crazy too. In my case I always inspect the screen looking for dead pixels (I usually install dead pixels app from the store)... and I have returned many phones because of this. (Including Note 3) In other words... like you mentioned... is your money, and if you are not 100% happy... return it... better live a week or 2 without the Note 4 than a year or more with the problem in your mind every single day...
Click to expand...
Click to collapse
So you have the same issue too? Ya if I didn't spend so much on this, I wouldn't make such a big fuzz.
Sent from my SM-P600 using Tapatalk
I just checked mine and the earpiece doesn't have this defect. It would bother me also.
aznmode said:
So you have the same issue too? Ya if I didn't spend so much on this, I wouldn't make such a big fuzz.
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Just checked my white note 4. The speaker on mine is fine. I'd return it if I were you.
It looks like assembly problem. It appears that your speakers grill sits on top of foam gasket (this would be a reason why it springs back).
Sent from my SGH-T889 using xda app-developers app
That sucks and I still don't get why online and their stores are separate. One thing I liked about AT&T is being able to return to store even if I ordered online.
Sent from my LG-D851 using Tapatalk
Thanks guys. Glad to know it's not on all of them. I don't mind waiting a few days for a replacement. I'm on the phone with them now. But ya, I also hate that I have call if I bought online. And if I buy at a store, it has to be the same type store, meaning if I bought at a corporate store, I have to go another corporate store.
UPDATE: Ok they had to reorder me a new phone (black). It wasn't out of stock so they are going to ship it to me overnight at no charge and will get it on Wednesday. As usual, they are charging me for the new one and will refund the charges on the 1st phone when they receive it back.
Sent from my SM-P600 using Tapatalk
aznmode said:
Thanks guys. Glad to know it's not on all of them. I don't mind waiting a few days for a replacement. I'm on the phone with them now. But ya, I also hate that I have call if I bought online. And if I buy at a store, it has to be the same type store, meaning if I bought at a corporate store, I have to go another corporate store.
UPDATE: Ok they had to reorder me a new phone (black). It wasn't out of stock so they are going to ship it to me overnight at no charge and will get it on Wednesday. As usual, they are charging me up front and will remove the charges when they receive the defective on back.
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
Beautiful. So you get a second phone before I even get my first? Sounds good.
They need to make orders upgradeable mid shipment.
p()()pypants said:
Beautiful. So you get a second phone before I even get my first? Sounds good.
They need to make orders upgradeable mid shipment.
Click to expand...
Click to collapse
I guess I got lucky the 2nd time around.
Not quite sure how UPS works but with FedEx ground it cannot be changed either once it ships. If it was express then they can switch between next day, 2nd and 3 days.
Sent from my SM-N900T using Tapatalk
Got my replacement today and I'm happy to report that it doesn't have the same issue. And is perfectly flushed against the glass.
Sent from my SM-N900T using Tapatalk

Zerolemon battery now out! [Feel free to show battery stats] [Discussion]

i've been keeping both eyes for this since i bought my G4 and now it is out on Amazon! Enjoy insane SOT!
http://www.amazon.com/gp/product/B01181ODJI
"Zerolemom. Turns your phone into a brick without flashing."
android404 said:
"Zerolemom. Turns your phone into a brick without flashing."
Click to expand...
Click to collapse
LOL
More like a cinder block with that size case. Wow.
Thanks for the info though.
That's great! I would probably get that if I was keeping my g4
What's that, about 10 pounds?
Sent from my VS986 using XDA Free mobile app
Bad topic!
looks like they decreased it by 500mah vs the G3 and took out the included belt clip
ixrs said:
looks like they decreased it by 500mah vs the G3 and took out the included belt clip
Click to expand...
Click to collapse
It does seem like that, but i think it'll be enough for two days.
Sent from my LG-H815 using XDA Free mobile app
If I can get 5 hours SOT with the stock battery about 13 hours with this one, that is ****ing impressive.
Get a morphie case and spare yourself the embarrassment...
Android_Guy said:
Get a morphie case and spare yourself the embarrassment...
Click to expand...
Click to collapse
Or i can not care what others think?
Android_Guy said:
Get a morphie case and spare yourself the embarrassment...
Click to expand...
Click to collapse
Nvm. Quick google search indicates mophie pack available.
---------- Post added at 08:52 PM ---------- Previous post was at 08:44 PM ----------
.84 inches is a thick damn phone to carry around. Part of me is telling me imwant. The other part says I don't want to carry it around. Especially when I have two spare batteries.
Say what you will, but I've had my old Galaxy S4 go over 6 days without a charge on one of their 7500 mAH batteries. it's not practical for everyone, but for specific situations it's quite useful.
Shaffer678 said:
That's great! I would probably get that if I was keeping my g4
Click to expand...
Click to collapse
Care to share why you're not keeping it?
adamdavidson said:
Care to share why you're not keeping it?
Click to expand...
Click to collapse
Well I came from the nexus 6 which was my first nexus device and the development on a nexus device can really spoil you. So I'm thinking I'm going to jump to one of the new nexus devices that launch soon.
Ordered mine hehe
I would like to get it, but its WAY too big for me. Maybe 4500 MaH, 5000 MaH, or 5500 MaH would be the sweet spot for me. As good as 7500 MaH sounds, its just way too big for me.
The note 3 one was too big lol
So now I'm torn between the mophie and zero lemon because this thing NEEDS a battery. The dies wayyyyyyy to fast
Sent from my LG-H812 using XDA Free mobile app
Metalshadowx2 said:
So now I'm torn between the mophie and zero lemon because this thing NEEDS a battery. The dies wayyyyyyy to fast
Sent from my LG-H812 using XDA Free mobile app
Click to expand...
Click to collapse
Indeed it does to bad my moto g doesn't have b12 as the battery is awesome

Categories

Resources