MODEST ROM
So, this is my rom. It's basically an all stock rom with some added features that, in my opinion, make for a much better overall experience than true stock. It comes with a custom kernel that is fully upstreamed for all the latest fixes and patches. If you like stock Note 4 look I don't think you'll find a better rom.
Features :
Flashpoint Kernel v3.1- Linux v.3.10.108 Thread Link
Rooted with Magisk v15.3
Busybox by osm0sis
Deodexed
Zip-aligned
Multi-DPI (Currently set at 560)
Private Mode Working
Safe volume removed
All apps multi-window
Brought back "once and always" buttons
Call record
5way reboot
6 in the Hotseat
TouchWiz swipe left
Toolbox enabled
Flashlight in QuickSettings Panel
Volume Up for flashlight- turn on in Settings/Display/Torch light
Tethering check disabled
1120 Fonts- Main Thread
Viper4android
There are a lot of thinks to give out, so here goes.
@topjohnwu
@carlosggb
@jovy23
@viper520
@SuperR.
@iBotPeaches
@nathanchance
@asc1977
@tdunham
@gharrington
@mariozawa
@Ticklefish
@osm0sis
@Kamy
@Alexandr
@BRoy_98
@1Xfan
@mhmdalsfaf
@supergrobi94
@dagrim1
@BeckPC
@Winb33
And for bringing root to the 910V. The following:
@beaups
@ryanbg
@Kingxteam
I really could go on and on. Everything I've learned is from members of XDA. Thank you to anyone who has taken the time to share their knowledge and if I've forgotten you just pm me and it will be corrected immediately.
ModestRom v11--- DOWNLOAD
If you've already upgraded your bootloader to CPD1 (MM 6.0.1) the only thing you need to upgrade is your modem. Using Odin, just place the modem file in the AP slot and boot your phone into download mode and flash.
CQL1 Modem Upgrade-- DOWNLOAD
Instructions
If you are on 5.1.1 you will need to upgrade your bootloader and reroot using this Guide.
If you have already upgraded to 6.0, unlocked your bootloader, and have TWRP installed, all you need to do is the following:
-Download the CQL1 modem upgrade to your pc
-Download the Rom to your internal or external sdcard
-Boot into recovery and factory reset your device
-Do not boot straight from recovery to download mode - download mode does not properly boot without doing the following
-Power off your device and pull your battery for 3-5 seconds (this will ensure that your device properly boots into download mode)
-Insert your battery and boot to download mode by holding vol. down + home button + power button at the same time
-Using Odin flash the CQL1 modem and once that completes, power off your device
-Now boot to recovery by holding vol. up + home button + power button
-Once you're in recovery go to advanced wipe and wipe everything but the internal and external sdcard (I always do this step twice)
-Then just go to install and flash the MODestRom zip file
-Boot time is about 7 to 10 minutes
-Enjoy!!
XDA:DevDB Information
MODest Rom, ROM for the Samsung Galaxy Note 4
Contributors
kevintm78
Source Code: https://github.com/kevintm78/Flashpoint_3
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: CQI2
Based On: TouchWiz
Version Information
Status: Stable
Current Stable Version: MODestRom v11
Stable Release Date: 2018-01-26
Created 2016-09-09
Last Updated 2018-01-26
Advanced/WiFi Calling Fix
This is how I got mine working; it's the same fix that @mharleston brought to light a while back.
Using any root explorer do the following:
-Go to /system/csc/ and find the sales_code.dat file
-Open with a text editor and change the VZW to TMB
-Save that file and reboot
-After the reboot go back to the same file and change it back to VZW and reboot again
Once it boots back up check in Settings and you should be able to access both the Advanced Calling and WiFi Calling
Flashpoint Kernel-most recent kernel
Link to kernel thread
How to Update Bootloader from CPD1 to CQI2
Link to post
MAGISK
Link to all things Magisk
Xposed-system-less v87.3_Updated for Magisk v18+
See this post
TWRP 3.2.2
TWRP 3.2.2 is now available! Here's the link The .tar file gets flashed in Odin (in the ap slot) and the image file can be flashed in recovery.
Theme's by @supergrobi94
Tons of different options.- and here's an example of my own personal favorite here.
☆☆Edge Panel for ModestRom v11☆☆
DOWNLOAD-This will change your Contacts app to the S6 version and the IncallUI app to the Note 7 version because the people stripe will not work with the N4 contacts.
☆☆3minit Battery Flashable for ModestRom v11☆☆
DOWNLOAD
☆☆3minit Battery-3minit Clock for ModestRom v11☆☆
DOWNLOAD
☆☆3minit Battery-3minit Clock-Gradient Statusbar for ModestRom v11☆☆
Download
☆☆Signature Spoofing for ModestRom v11☆☆
Link to info and Download
☆☆Older ModestRom Versions☆☆
DOWNLOADS
GRACE Apps
Grace_Contacts
GRACE_Email
GRACE_VoiceNotes
Grace_InCallUI
Other Apps
S7 S-Voice flashable zip - after you flash that you can update it with this app.
Modded YouTube app- allows background playback and no ads
Kernel Adiutor-mod- alternative app that has different options and may suit some people better
Device Check- a must have app. Will tell you nearly everything you need to know about your device.
Adaway app- another must have app. Imo this app greatly speeds up stock browser and Chrome
arkTube app-an app for downloading YouTube videos.
S7 Keyboard
TerrariumTV app- a great app to watch all your favorite shows and movies
Please post screenshot
RaipurBoy said:
Please post screenshot
Click to expand...
Click to collapse
Sorry about that, screenshots are up.
Does this work with 910t , if we use T-Mobile kernel ?
Manan79 said:
Does this work with 910t , if we use T-Mobile kernel ?
Click to expand...
Click to collapse
I'm not real sure. It seems like the v&t can both run on f&g models, so if i had to guess i think it can. But that's just a guess.
Hi! I'm very excited there's a new ROM for my N910V. Does Wifi/Advanced Calling work on this ROM?
shusuke028 said:
Hi! I'm very excited there's a new ROM for my N910V. Does Wifi/Advanced Calling work on this ROM?
Click to expand...
Click to collapse
Advanced calling works and wifi calling activates when you turn it on, but to be honest i haven't tried it to verify. Also just in case your wondering, visual voice mail works (it drives me crazy when I can't get vvm to activate on other roms.)
Good Job
how install this? use twrp? i apreciated you say the step instalation
this rom is rooted?
lesther70 said:
how install this? use twrp? i apreciated you say the step instalation
this rom is rooted?
Click to expand...
Click to collapse
Yes twrp. Just download the zip file, place on your external sd card, or internal if you don't plan on formatting data (although I would), and flash zip file. Also if you haven't already upgrade your modem to pf3, do that first. The link for that is here. The modem needs to be flashed through odin. I'll be sure to update the op to include instructions. Thanks for pointing that out.
kevintm78 said:
Yes twrp. Just download the zip file, place on your external sd card, or internal if you don't plan on formatting data (although I would), and flash zip file. Also if you haven't already upgrade your modem to pf3, do that first. The link for that is here. The modem needs to be flashed through odin. I'll be sure to update the op to include instructions. Thanks for pointing that out.
Click to expand...
Click to collapse
thanks friend
Cool rom, but why have 2 batteries enabled on boot? How can we uninstall minit if we prefer the stock batteries?
lev777 said:
Cool rom, but why have 2 batteries enabled on boot? How can we uninstall minit if we prefer the stock batteries?
Click to expand...
Click to collapse
There shouldn't be two batteries. Did you do a full wipe first? I'll post a version without 3minit mod since it basically requires a paid app to work.
I wiped everything except internal storage and SD card in twrp. Can you add screenshot option to power menu? Thx.
Sent from my SM-N920V using Tapatalk
lev777 said:
I wiped everything except internal storage and SD card in twrp. Can you add screenshot option to power menu? Thx.
Sent from my SM-N920V using Tapatalk
Click to expand...
Click to collapse
I can certainly give it a shot . I'll have a copy of the systemUI without 3minit up in the morning, as soon as I can get to my computer. Also of you don't want the statusbar gradient you can go into the gradient app and push the slide bar under the color box all the way to the right. I circled the bar in screenshot.
Hopefully this rom is stable, and not a lot of bugs. I've flashed 4 different Roms in the past week or 2.
Sent from my SM-G935V using Tapatalk
---------- Post added at 03:54 PM ---------- Previous post was at 03:53 PM ----------
Is it recommended to flash a different kernel or is the kernel that's incorporated into this rom suffient?
Sent from my SM-G935V using Tapatalk
---------- Post added at 03:55 PM ---------- Previous post was at 03:54 PM ----------
Were do I get the 3mint battery mod? Is this a TW rom or aosp
Sent from my SM-G935V using Tapatalk
mwebb34 said:
Hopefully this rom is stable, and not a lot of bugs. I've flashed 4 different Roms in the past week or 2.
Sent from my SM-G935V using Tapatalk
---------- Post added at 03:54 PM ---------- Previous post was at 03:53 PM ----------
Is it recommended to flash a different kernel or is the kernel that's incorporated into this rom suffient?
Sent from my SM-G935V using Tapatalk
---------- Post added at 03:55 PM ---------- Previous post was at 03:54 PM ----------
Were do I get the 3mint battery mod? Is this a TW rom or aosp
Sent from my SM-G935V using Tapatalk
Click to expand...
Click to collapse
Yes it's very stable. I use my phone heavily for work and that was my kind of the reason I started down this path. If you want to wait a couple hours I'm going to post another version, with 3minit battery and one without. Also a couple more tweaks/mods. I'll update the op with more info as well.
kevintm78 said:
Yes it's very stable. I use my phone heavily for work and that was my kind of the reason I started down this path. If you want to wait a couple hours I'm going to post another version, with 3minit battery and one without. Also a couple more tweaks/mods. I'll update the op with more info as well.
Click to expand...
Click to collapse
Great,news brother!! I have a question it's probably been asked already but I have 2 battery icons the stock then the 3 mint.
Sent from my SM-N920V using Tapatalk
---------- Post added at 05:07 PM ---------- Previous post was at 05:05 PM ----------
I factory reset then wiped data system cache and dalvik.
Sent from my SM-N920V using Tapatalk
---------- Post added at 05:34 PM ---------- Previous post was at 05:07 PM ----------
I flashed the modest rom about a hour ago. I gotta say man its great to see a rom that actually works the way it's supposed to work. No FCs or systemUI FCs or random reboots and WiFi works without having to enter my WiFi password everytime I reboot my device.
Sent from my SM-N920V using Tapatalk
Related
I have started this thread to keep track of working S4 ROMS on S4A with SafeStrap.
I would only try 4.2.2 Touchwiz roms due to are kernel limitation!!
You must flash your module MF1,MF2,MF3 zip for the stock rom you are on! Also menu and back keys need to be configured
I have had no luck getting stock camera to work on any S4 rom even with camera patches.
Due to post count I can not provide links yet!
Confirmed Working:
SHOstock-v2.0 and update to v2.3 (Camera not working) Can use Focale or Camera 360
Confirmed Not Working:
Flight 5 (bootloop)
MDOB MF3 v2.5 (Wll not Flash)
If you get an error saying it isn't compatible because you don't have a 9295 or something you can edit the updater script and remove the compatibility check. I say this because I am currently using the MDOB rom and I love it.
Screenshot: https://db.tt/xm1KlRzR
That's great u have it working! I tried to flash ran for 20 min and nothing! Are u running a i537? Please share what steps u took, the main reason I started this thread. Also did u get the camera working?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
davenger1 said:
That's great u have it working! I tried to flash ran for 20 min and nothing! Are u running a i537? Please share what steps u took, the main reason I started this thread. Also did u get the camera working?
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Honestly I don't know what it was. I'm running MF1. Hyperdrive used to work for me but not now. After seeing the new one I have to try again lol. Anyway, I just created a rom slot, flashed the MF1 module, flashed the rom, reflashed module, flashed some of the addons from the thread, and it booted right up.
No camera support whatsoever though = /. At least not that I can see lol.
---------- Post added at 03:29 AM ---------- Previous post was at 03:15 AM ----------
Here is what seems to be important about being able to use any particular rom:
1. Comes in a flashable .ZIP format
2. Does NOT require any kind of custom kernel
3. Stock based (4.2.2)
4. Does not automatically install any modem files. (soft bricked a few times trying to flash a rom with a modem)
Other things I've noticed:
These stock based roms will USUALLY work fine if you "Restore Data" after you boot them. That being said, you need to pay attention to whether the rom is odexed or deodexed. I keep a backup of my config in an odex data file and a deodex data file so I can flash either = ).
All roms share the same Download/Music/Video etc folders which is awesome.
Camera almost never works.
I never get init.d support (maybe something I'm doing wrong?)
I will post more info as it comes to mind. (3:30 AM lol)
---------- Post added at 03:34 AM ---------- Previous post was at 03:29 AM ----------
Here is what seems to be important about being able to use any particular rom:
1. Comes in a flashable .ZIP format
2. Does NOT require any kind of custom kernel
3. Stock based (4.2.2)
4. Does not automatically install any modem files. (soft bricked a few times trying to flash a rom with a modem)
Other things I've noticed:
These stock based roms will USUALLY work fine if you "Restore Data" after you boot them. That being said, you need to pay attention to whether the rom is odexed or deodexed. I keep a backup of my config in an odex data file and a deodex data file so I can flash either = ).
All roms share the same Download/Music/Video etc folders which is awesome.
Camera almost never works.
I never get init.d support (maybe something I'm doing wrong?)
I will post more info as it comes to mind. (3:30 AM lol)
There already is a thread for ROMs working with Safestrap http://forum.xda-developers.com/showthread.php?t=2491762
Please post in that one
Thanks
FNM
This is a port of an amazing rom by Moluntic and Prashantp01 that was for the J700F/H/M.
Port completed and maintained by (ME) Full Of Hell and Metabolic12
Their original threads are here:https://forum.xda-developers.com/galaxy-j7/development/rom-stock-optimized-rom-build-galaxy-j7-t3444761
And https://forum.xda-developers.com/galaxy-j7/development/optirom4-1bymolunticprashantp01-t3558251
SO make sure to hit their thanks buttons on their threads too!
Thank you also to Messi2050 for the amazing Mina kernel, Without that, nothing really would work for the J700T!
Also, thank you to ashyx for the twrp port .Without those critical things ports, roms, root, nothing would be possible! we appreciate all you guys do!
Installation of Optirom V4.1 Port for the J700T T-Mobile
Rom created by Moluntic; V4.1 By Prashantp01 Ported by Full Of Hell
First off you need use this twrp via odin to get rom to work: https://forum.xda-developers.com/galaxy-j7/j700t-development/recovery-twrp-v3-galaxy-j7-metropcs-t3427499
Download Optirom V4.1 Rom Zip and Edge Screen zip. Rom: https://mega.nz/#!wyRTjSDJ!xj75kJYI5BnCPKnOWP8wQf4BioMOCenVj6WKW6EyK-k
edge screen zip: https://mega.nz/#!N6ZXDAKD!obwY7z4a2Ny9t6XEIdSeW6RN6tWBZFzq3zAvVyoUnIc
Download Mina Kernel:
http://www.mediafire.com/download/j2a3m54txr3aedd/permissive+selinux+and
Download Boot Image Patch to disable encryption:https://forum.xda-developers.com/galaxy-j7/j700t-development/recovery-galaxy-j7-sm-j700t-t1-t3560342
Download SuperSu 2.82 zip: https://forum.xda-developers.com/app...2-05-t2868133/
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards , ...
Please do some research if you have any concerns about Custom Roms before flashing it!
Place all these files on external sd card
Make nandroid backup
Boot to recovery
Wipe dalvik, cache, data, and system
Flash in this order:
Rom
Edge screen zip
Mina Kernel
Supersu
Encryption breaker
Reboot
first boot takes about 4 to 7 mins
Enjoy!
The Rom is Fully Deodexed
- Debloated
- VoLte Works Great
- S Music Added
- Edge Screen (flashable)
- S7e nougat browser
- S7e nougat keyboard
- S7e nougat calculator
- S7e nougat weather widget
- S7e nougat Samsung apps
- S7e nougat Gallery
- BusyBox Preinstalled
- S Music Added
- S Bike Exist
- Ultra Data Saving Fully Removed
- Lots Of Tweaks Added (Build.prop)
- Volume Up Mode Added (Thanks @messi2050)
- VoLte Works Great
- Csc Tweaks Added
- H+ Replaced With DC ( Signal Bar)
- Google Package Installer Signature Check Disabled
- Screen Overly Issue (From Android 6.0.1) Fixed
- Statusbaricons Alpha Channel Removed (It Means U Will See Icons Brighter)
- PowerSaveMode Gray Statusbar Icons Removed
- Screen Capture Toggle Added
- ToolBox + Toggle Added (12 App)
- Do Not Disturb Schedule Added
- All Ad Blocking Apps Database Included (No Need Such App)
- Update Tab Removed From Setting
- Smart Capture Added
- Galaxy Lab Added
- Power Menue Has More Features Now (Screen Recorder + Reboot Recovery)
- More Language Added
- Low Battery Noti. Removed
- Safe Volume Warning Removed
- Power menu and Recent view Background Blured
- QS Favorites in Setting Removed
- TW Launcher Wall Scrolling Enabled
- Some Cool Fonts Added + Samsung Sans
- Some Nougat Wall Added
- Network Traffic Added (With Customization In Setting) (Setting/Display/Network Traffic)
- MultiWindow (+Popup View) Ported And Working Fine
- Maybe More . . . . .
Also,
-Mina kernel is permissive, so get them audio mods
-Xposed works great in this rom, not included but recommended
Everything works on this Rom EXCEPT for the Camera. That is a work in progress. An update will be around soon to resolve the cam probs. Sorry!
Special Thanks To Metabolic12 for helping me out with my work and having the time to teach me when i'm faced with a problem.
XDA:DevDB Information
[Rom]Optirom V4.1 Port To The J700T , ROM for the Samsung Galaxy J7
Contributors
fullofhell, fullofhell, metabolic12, Moluntic; Prashantp01
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Beta
Created 2017-06-26
Last Updated 2017-07-07
Reserved
Reserved
Awesome job brother! About time you posted this bad boy!!
Metabolic12 said:
Awesome job brother! About time you posted this bad boy!!
Click to expand...
Click to collapse
Thanks dude I appreciate it, thanks for your support and thanks for your Yoda skills !
fullofhell said:
Thanks dude I appreciate it, thanks for your support and thanks for your Yoda skills !
Click to expand...
Click to collapse
Ah man no problem, looks like the student is surpassing the master!!
Metabolic12 said:
Ah man no problem, looks like the student is surpassing the master!!
Click to expand...
Click to collapse
I don't think that's quite right bro I'm just a vessel lol
so first thing i found was that there is no way to control background data. there is an option call ultra data saving mode, but when you click on it or toggle it it force closes
gizm0luvsu said:
so first thing i found was that there is no way to control background data. there is an option call ultra data saving mode, but when you click on it or toggle it it force closes
Click to expand...
Click to collapse
I have never paid attention to the background data stuff, I'll look into it, but till then, go to developer menu and disable whatever u don't want running. Or under applications.
fullofhell said:
I have never paid attention to the background data stuff, I'll look into it, but till then, go to developer menu and disable whatever u don't want running. Or under applications.
Click to expand...
Click to collapse
Actually now I think about it, I recommend boot manager module in Xposed. U can control what u want to start running at boot.its amazing
nice work bro
Oves786 said:
nice work bro
Click to expand...
Click to collapse
Thank you bro!
i cant get this rom to load keeps hanging after third bootloop ive tryed like 6 times im not sure why it wont im on the latest twrp
crumle60 said:
i cant get this rom to load keeps hanging after third bootloop ive tryed like 6 times im not sure why it wont im on the latest twrp
Click to expand...
Click to collapse
There's no bootloop. Flash the rom, the edge, then the Mina kernel the SuperSU zip then encryption breaker.
fullofhell said:
There's no bootloop. Flash the rom, the edge, then the Mina kernel the SuperSU zip then encryption breaker.
Click to expand...
Click to collapse
And are you using the twrp I have linked in post?
fullofhell said:
And are you using the twrp I have linked in post?
Click to expand...
Click to collapse
It can't be the j700t specific twrp has to be the one I have listed the general twrp for the j700; It sounds like u didn't flash Mina kernel bro
thanks for ur help
fullofhell said:
It can't be the j700t specific twrp has to be the one I have listed the general twrp for the j700; It sounds like u didn't flash Mina kernel bro
Click to expand...
Click to collapse
i got it up it was a rookie mistake i was flashing min as a zip instead of the img.thanks for the quick reply i apreciate it, and its all good im using the rom as we speak
---------- Post added at 01:50 PM ---------- Previous post was at 01:46 PM ----------
crumle60 said:
i got it up it was a rookie mistake i was flashing min as a zip instead of the img.thanks for the quick reply i apreciate it, and its all good im using the rom as we speak
Click to expand...
Click to collapse
and a side note im still on the special 3.03 twrp for j700t its working fine
crumle60 said:
i got it up it was a rookie mistake i was flashing min as a zip instead of the img.thanks for the quick reply i apreciate it, and its all good im using the rom as we speak
---------- Post added at 01:50 PM ---------- Previous post was at 01:46 PM ----------
and a side note im still on the special 3.03 twrp for j700t its working fine
Click to expand...
Click to collapse
Awesome happy to hear you got it booted... Yeah I forgot it would prob work on the other twrp too. Thanks for the reminder bro some of the ROMs I have been working on need the one and some need the other.. depends on what you're working with. Enjoy.. pixel experience port should be up soon too, along with a port of the radical experience rom.
Need testers, PM if interested. Zero pay and lots of battery removal. Hmu.
Will the camera work on those or will need to be fix later as well
Hi XDA friends.
This ROM was modified using latest official ROM released for betatesters group (January 10th 2017), and some days ago for all public under OTA feature.
Disclaimer :
Code:
Install at your own risk, only you are responsible for your device
The main features in this customized ROM are:
Root with Magisk
TWRP in-built
A/B TWRP installer zip with fast flashing time, about 50 seconds to finish.
Pico GApps
Centered clock with screen lock feature
Fingerprint unlock after a reboot without use pattern or PIN
Added MIUI main applications like Mi Remote, Mi File Explorer and Music
Third party app for reboot in recovery mode
Minor patches and tweaks
Installation method:
Reboot in TWRP
Do a factory reset (recommended)
Flash zip ROM
For TWRP boot instructions:
Follow Mi A1 TWRP thread
Download center:
A-One_tissot_8.1.10_v8.0_customized.zip
Credits:
Xiaomi
Google
@topjohnwu for Magisk root
TWRP team
Version Information
Status: stable
Current Stable Version: 8.1.10
Stable Release Date: 2018-01-10
Created: 2018-01-10
Last Updated: 2018-01-17
Reserved
Asuming is a Stock ROM with some tweaks, have you added, or think in add in some update, the Support for Camera2API?
I know it's just some code lines in the build.prop, but with this and the sideload of some GCam apk, everything gets better.
hello I flased and bootloop screen mi
EDIT, working flased , not working apk reboot to recovery edit root permisions in working apk reboot to recovery
thansk
regards
Thanks @JamFlux
Good work
i have flashed and also booted up will give review after 2 days
Hello it seems that drains a lot of battery when you use it
regards
Thanks for your work!
Any way to remove the top centered clock from lock screen? Or even to remove it at all?
Edit: actually, I'd rather remove that option and put the clock back to it's original location. Any idea how?
Thanks again.
Regards
Thanks @JamFlux. That sounds nice. Must try that asap.
can i flash with the twrp that u provided in your oreo beta modded rom earlier ??
---------- Post added at 12:49 AM ---------- Previous post was at 12:48 AM ----------
or both are same
aayush prinja said:
can i flash with the twrp that u provided in your oreo beta modded rom earlier ??
---------- Post added at 12:49 AM ---------- Previous post was at 12:48 AM ----------
or both are same
Click to expand...
Click to collapse
yes try with modded twrp
but both are not same
Passaralho said:
Thanks for your work!
Any way to remove the top centered clock from lock screen? Or even to remove it at all?
Edit: actually, I'd rather remove that option and put the clock back to it's original location. Any idea how?
Thanks again.
Regards
Click to expand...
Click to collapse
Sorry, the ROM is as is it. You can put the original systemui app, but you will lost a lot of features.
iron maiden said:
Hello it seems that drains a lot of battery when you use it
regards
Click to expand...
Click to collapse
Let the screenshots speak.
Make a full charge, then delete batterystasts.bin and reboot.
JamFlux said:
Let the screenshots speak.
Make a full charge, then delete batterystasts.bin and reboot.
Click to expand...
Click to collapse
Awesome!
JamFlux said:
Let the screenshots speak.
Make a full charge, then delete batterystasts.bin and reboot.
Click to expand...
Click to collapse
hello, ok thanks
regards
hmm i wipe cache/system/data after flashing now it reboot only to twrp what i did wrong?
Return the clock to the place.
lagging
camera is lagging like hell, front and rear both camera are lagging even while switching from one to another
People who had problems with video camera in the previous ROMs provided by @JamFlux, are you now capable of recording video in this ROM?
fida4011 said:
camera is lagging like hell, front and rear both camera are lagging even while switching from one to another
Click to expand...
Click to collapse
U have to flash one Magisk module for that... Magisk Permissive Script
Can I flash this ROM with FlashFire?
Hey All,
I Read many messages about Viper not working in Oreo ROM,
I have some steps & file through which i am able to run V4A + Dolby Digital with Best sound quality in my life.
Here are the name & steps of File (sorry you can search for link in google easily available) :-
Files Required :-
1) magisk-permissive-script_v1.2 (Magisk Module)
2) ARISE+Deuteronomy+2.94+Modular+AROMA+Installer (ZIP Flashable file) around 125 MB
Steps :-
1) Rooted OOS (Stock or Beta) / Freedom OS (based on Oreo 8.0) with Magisk V15+ (Stable Latest only)
2) Load magisk-permissive-script_v1.2 from Magisk Manager & Flash
3) Reboot
4) Check in Setting > System About > There will be no SE LINUX STATUS SHOWING (Thats OK)
5) Reboot in Recovery (Official TWRP 3.2.1 recommended but also work with blu_spark twrp)
6) Wipe Dalvik / Cache
7) Flash ARISE+Deuteronomy+2.94+Modular+AROMA+Installer (Link : https://androidfilehost.com/?fid=457095661767141554 )
8) Now you would be in Aroma Installer (Now select only as per under Lisit, rest of all select Skip or No)
- Core Module - INSTALL YES
- Viper Version 2.5 - INSTALL YES
- Dolby Digital Plus - INSTALL YES
- Remove Deep Buffer - NO
- SeLinux Permissive - YES
- SD Card Repair Permission - YES
Rest of all option Select NO or SKIP (THIS IS MUST FOLLOW)
9) Finish Installation in 1 minutes.
10) back to TWRP
11) Reboot to System
12) Wait few minutes, if stuck in boot then go to TWRP & clear Dalvik Cache.
13) On main screen
13) Go to Viper4Arise from Menu drawer
14) Load Profile (Viper 4 Arise)
15) Back to Main drawer
16) Use Google Play or any third party app ( i have tried Saavan also, it worked)
17) Play music > Feel the Effect
18) You must adjust Dolby digital plus setting under Music option as per your need (equaliser)
19) Reboot System, Everything is working fine. Nothing to do again.
20) Even with many different Kernel no issue (tried blu_spark, Franco kernel, boeffla kernel)
I am sure this is universal solution for OOS based rom 8.0
Please let me know if you are still facing issue.
If you need my Viper Profile & Dolby Setup Screen Shoot, please let me know.
It is working for youtube and any other app right ?
---------- Post added at 08:26 PM ---------- Previous post was at 08:02 PM ----------
Bruv it didnt work for me , how to uninstall ?xd
Kecoe said:
It is working for youtube and any other app right ?
---------- Post added at 08:26 PM ---------- Previous post was at 08:02 PM ----------
Bruv it didnt work for me , how to uninstall ?xd
Click to expand...
Click to collapse
Dirty flash ROM
---------- Post added at 03:30 AM ---------- Previous post was at 03:27 AM ----------
Y post it in cross development section
This is for Dev's
Mods: move this to guides section
Kecoe said:
It is working for youtube and any other app right ?
---------- Post added at 08:26 PM ---------- Previous post was at 08:02 PM ----------
Bruv it didnt work for me , how to uninstall ?xd
Click to expand...
Click to collapse
Yes, it is working for youtube also.
What is your ROM & Kernel using.
smitmakani said:
Yes, it is working for youtube also.
What is your ROM & Kernel using.
Click to expand...
Click to collapse
Its Nitrogen os , redmi 4x. Stock kernel . the story is I could use viper and dolby before. But i uninstalled becouse I wanted to try an onlder version. Since then I cant make any of them work, forceclose or update popup with viper. Is it caused by a module?
Kecoe said:
Its Nitrogen os , redmi 4x. Stock kernel . the story is I could use viper and dolby before. But i uninstalled becouse I wanted to try an onlder version. Since then I cant make any of them work, forceclose or update popup with viper. Is it caused by a module?
Click to expand...
Click to collapse
This is Oneplus 3 & 3T section, So please post your query in Redmi 4x forum.
smitmakani said:
This is Oneplus 3 & 3T section, So please post your query in Redmi 4x forum.
Click to expand...
Click to collapse
Wow I didnt even notice it . btw I still dont understand. It should be working
After flashing the viper4arise on OOS, I get dirac control service force close. If I remove dirac related apks manually, then the ringtone volume reduces and phone earpiece quality becomes high pitched on call somehow.
Can anyone confirm this? I am on OB31
there's no need for permissive Module anymore, the latest V4A module by Ahrion works strait out of the box in Enforcing with no issues.
only thing that might need to be installed is Busybox.
---------- Post added at 08:11 PM ---------- Previous post was at 08:09 PM ----------
daninantro said:
After flashing the viper4arise on OOS, I get dirac control service force close. If I remove dirac related apks manually, then the ringtone volume reduces and phone earpiece quality becomes high pitched on call somehow.
Can anyone confirm this? I am on OB31
Click to expand...
Click to collapse
im on ob31 , remove any related modules and any old v4a or permissive one and dirty flash rom to add dirac back, and then flash the Ahrion V4a module from Magisk manager download section (or you can find it in the magisk forums) ... works perfectly fine without issues.
theduke7 said:
there's no need for permissive Module anymore, the latest V4A module by Ahrion works strait out of the box in Enforcing with no issues.
only thing that might need to be installed is Busybox.
---------- Post added at 08:11 PM ---------- Previous post was at 08:09 PM ----------
im on ob31 , remove any related modules and any old v4a or permissive one and dirty flash rom to add dirac back, and then flash the Ahrion V4a module from Magisk manager download section (or you can find it in the magisk forums) ... works perfectly fine without issues.
Click to expand...
Click to collapse
Tried the module but get fc of viper4android constantly
daninantro said:
Tried the module but get fc of viper4android constantly
Click to expand...
Click to collapse
Do you have busybox installed
theduke7 said:
Do you have busybox installed
Click to expand...
Click to collapse
yes sir.. I will try it once again after dirty flashing the ROM. Lets see
daninantro said:
yes sir.. I will try it once again after dirty flashing the ROM. Lets see
Click to expand...
Click to collapse
There's a good busybox module in magisk repo by osmosis , it works for me try it
@theduke7 are you planning to update freedom os ce or stable for next release ? I loved your rom & would like if we can get viper ready rom with your current root safety net features.
Thanks for your work..
smitmakani said:
@theduke7 are you planning to update freedom os ce or stable for next release ? I loved your rom & would like if we can get viper ready rom with your current root safety net features.
Thanks for your work..
Click to expand...
Click to collapse
You're mistaking me for @NevaX1 he's the dev of that rom he deserves all the thanks .
theduke7 said:
You're mistaking me for @NevaX1 he's the dev of that rom he deserves all the thanks .
Click to expand...
Click to collapse
Oh yes, sorry, my mistake.
I seen your Picture so confused... THanks
best settings to get perfect audio??
can anybody guide me for perfect audio settings for viper 4 arise??
Has anyone tried to install Magnum Opus (latest version)? I'm on open beta rom and I try like a 1000 times to install it from different ways, but it refuses to install the driver once booted. Viper app says driver status abnormal and not installed...
Wolfillete said:
Has anyone tried to install Magnum Opus (latest version)? I'm on open beta rom and I try like a 1000 times to install it from different ways, but it refuses to install the driver once booted. Viper app says driver status abnormal and not installed...
Click to expand...
Click to collapse
same and my device starts restoring it self
dhanmohan said:
same and my device starts restoring it self
Click to expand...
Click to collapse
What steps have you followed? Are you in open beta?
ROM Samsung Experience 8.5 Game Life for Samsung J3 V3
?????Modo Nigth Samsung..???
(SPREADTRUM & EXYNOS)
(New links) Optimize online Game in Samsung J3 2016 ¡without root!
Configuration PUB Gfxt tool for Android
Video en español abajo
Mod for Free Fire Full HD !!!???
Root magiks:
View attachment 4722395
??!SE 8.5 Style S9 v1 ¡?Rom Samsung J3 2016 J320M/G/M/F/FN & J320AZ,AG,A,w8 & J321AZ
Caution
-Read the ROM installation instructions correctly
-Error reports without the device variant and the records can not be considered errors
-Be sure to provide detailed information when reporting errors
-Press the 'Thank you' button instead of saying it will keep me motivated to do more
Click to expand...
Click to collapse
Screenshot:View attachment 4721443 View attachment 4721444 View attachment 4721445 View attachment 4721446
Click to expand...
Click to collapse
General Features
If you served the ROM you want to help me like me, you can help me by donating US $ 1,2,3,4,5 .......
V1
-Based on compilation J320AZTUS3BQL1, in base J320AZTUS3AQG1 (AQG1)
_Security patch December
-Completely deodexed
-Without secondary application only those of samsung
-Multiwindows
-Compatible with models [J320AZ/W8/ AG / A] Also for J321AZ
-[Battery LIFE without power saving mode activated]
-Playing 8 to 6 hours in a row
-Social networks and youtube 10 to 8 hours in a row
-Normal use from 18 to 16 hours
-Games like the fire free, PUBG Mobile, World of Tanks Blitz go fluid
V2
-Full Without secondary application only those of samsung
-Bootanimation black ATT
-Different sound when starting
v3
Added:
-Game Home
-Game Tuner
-Game ToolS
To activate Game Launcher after starting it go settings> applications> search Game Laucher and activate it
There is still no supersu method in 7.1.1you can install xposed but it will fail Galaxy theme recommend installing a theme first after xposed
Bug J321AZ/0AZ/AG/G F/FN and G
Solution:
After installing the custom Rom, the network will take a long time to grab Solution go settings> Mobile networks> Access point name> select the 2 option, they give in to add after they restart their cell phone and install any theme
Installation steps for J320AZ/AG/A J321AZ
On android 6.0.1
1- Be completely in the complication J320AZTUS3AQG1 . J320AUCS3AQG1 and J320AUES2APJ2 on J321AZ AQG1
2-Follow these steps to be superuser https://forum.xda-developers.com/galaxy-j3-2016/how-to/root-j320a-j320az-alternate-method-t3627225
3-Then download and install flashfire
4-Download the Custom ROM and pass it to the micro sd or internal memory
5-To use flashfire go settings change the date to year 2013
6-Open flashfire give permissions, then select flash zip or OTA, they look for the downloaded file they select it, select Mount/system read/ write
7-select wipe , they select the first 3, they select internal storage and select the pigeon
8=Selec FLAHS and OK
9=Wait 10 to 20 minutes and enjoy
10=Well, if you install the rom, the files of the internal memory will not be deleted. Reset the factory cell phone from settings
On android 7.1.1
1-Use odin to downgrade to android 6.0.1 After unzipping the folder come 4 files select in the corresponding places, same as in the csc file you will have to decompress it with 7-zip and odin select PIT and look for the PIT in the csc folder as you select it when you return to 6.0.1
do not download more of that compilation if it's not going to leave error
2-Then remove the battery from your cell phone, put it back again press home key plus volume up button more power button select restart factory and restart
3-Follow the steps of android 6.0.1
Below for models M / G / F / FN
Downloads: {Mod edit}
Mod Edit: Please DO NOT quote the entire OP
edgar43 said:
ROM Samsung Experience 8.5 Game Life for Samsung J3 V3
Modo Nigth Samsung..
(SPREADTRUM & EXYNOS)
......................................
Click to expand...
Click to collapse
can i use it on j320G sir? or not?
Greenpeanut said:
can i use it on j320G sir? or not?
Click to expand...
Click to collapse
If you can use it with that model
Mod Edit: Please DO NOT quote the entire OP
edgar43 said:
ROM Samsung Experience 8.5 Game Life for Samsung J3 V3
Modo Nigth Samsung..
(SPREADTRUM & EXYNOS)
......................................
Click to expand...
Click to collapse
youre back
Also please release one ui v1.. I want to try it really bad.[/QUOTE]
Yes, I will upload it bro but it is for the samsung exynos
edgar43 said:
Also please release one ui v1.. I want to try it really bad.
Click to expand...
Click to collapse
Yes, I will upload it bro but it is for the samsung exynos[/QUOTE]
j320fn? And which Android?
V3 for j320FN?
Bootloop for j320FN, the phone starts, arrives at the welcome screen, where it lets you choose the languages, and then restarts, I have already tried to do wipe data and wipe cache and davilk cache but the rom remains in bootloop. ( before installing this rom I had lineage os and not the stock firmware )
MR207 said:
Bootloop for j320FN, the phone starts, arrives at the welcome screen, where it lets you choose the languages, and then restarts, I have already tried to do wipe data and wipe cache and davilk cache but the rom remains in bootloop. ( before installing this rom I had lineage os and not the stock firmware )
Click to expand...
Click to collapse
You're sure you have flashed the correct files? Have you also flashed the" fix file " before flashing the rom?
---------- Post added at 12:23 PM ---------- Previous post was at 12:23 PM ----------
MR207 said:
Bootloop for j320FN, the phone starts, arrives at the welcome screen, where it lets you choose the languages, and then restarts, I have already tried to do wipe data and wipe cache and davilk cache but the rom remains in bootloop. ( before installing this rom I had lineage os and not the stock firmware )
Click to expand...
Click to collapse
Also which version have you installed? And have you used the turtorial?
2gg1 said:
You're sure you have flashed the correct files? Have you also flashed the" fix file " before flashing the rom?
---------- Post added at 12:23 PM ---------- Previous post was at 12:23 PM ----------
Also which version have you installed? And have you used the turtorial?
Click to expand...
Click to collapse
I have lineage os with root permissions, I installed flashfire and I followed the tutorial to install the rom. The version I tried is V2 and V3 FN model. I also tried using twrp but it doesn't work anyway. I will try to restore the stock firmware with odin and follow the tutorial step by step
MR207 said:
I have lineage os with root permissions, I installed flashfire and I followed the tutorial to install the rom. The version I tried is V2 and V3 FN model. I also tried using twrp but it doesn't work anyway. I will try to restore the stock firmware with odin and follow the tutorial step by step
Click to expand...
Click to collapse
Did you flashed the fix file before on twrp
2gg1 said:
Did you flashed the fix file before on twrp
Click to expand...
Click to collapse
No?, where is link of fix file?
MR207 said:
No?, where is link of fix file?
Click to expand...
Click to collapse
Here: {Mod edit: Link removed}
I have found it on the developers youtube channel
Please tell if it worked now
2gg1 said:
Here: ...
I have found it on the developers youtube channel
Please tell if it worked now
Click to expand...
Click to collapse
Don't work
---------- Post added at 10:48 AM ---------- Previous post was at 10:43 AM ----------
F and FN are 2 differents model. If rom Is the same for both i think that i need to install the PHN baseband for FN.
MR207 said:
Don't work
---------- Post added at 10:48 AM ---------- Previous post was at 10:43 AM ----------
F and FN are 2 differents model. If rom Is the same for both i think that i need to install the PHN baseband for FN.
Click to expand...
Click to collapse
Try that. If i remember i have installed the phn then the fix then the rom
2gg1 said:
Try that. If i remember i have installed the phn then the fix then the rom
Click to expand...
Click to collapse
Yea it works, FN model needs the phn baseband. but the rom is android 6.0.1 not 7.1
works on j320h????????????
MR207 said:
Yea it works, FN model needs the phn baseband. but the rom is android 6.0.1 not 7.1
Click to expand...
Click to collapse
what phn baseband i need pls
when i used the rom it was great but i had a problem, galaxy themes and galaxy store don work
can any one help me