Moto XT1060 2016 Questions - Moto X Q&A

So, I first received one of these after 4.4.4 was already on it. about a year ago successful root using ExtremeSlimRoot. Wonderful, beautiful little phone that is super snappy fast even today. So, as I use it as as secondary phone, thought it's been close to a year, why not see if boot unlock code avail or exploit has been discovered. Had a couple related questions
So, wanted to confirm, non dev devices with locked bootloaders and 5.1 have no exploit now or forever to unlock?
Additionally, phone has been rooted for quite awhile, SuperSU is constantly upset about a binary that won't update, likely because was injected into a read only section of system? Is there any easy fix or is only option to stock restore, and grab a newer root option?
Has there been any develops or recommended updates since slimroot, or is that still about what is available for this device?
Thanks!

Related

OTA 139.15.1 keep root

All,
Has anyone on Verizon done the OTA update and kept root? From what I've been reading, sounds like if you rooted with MotoRoot then you're okay, but not if you used PwnMyMoto.
As far as people getting a bootloop, that does make some sense because the recovery partition is really just the boot image... So I can flash the stock recovery to the recovery partition before running the update, and that should theoretically prevent a bootloop. However, if this is going to erase my root, then I don't want to do the update.
So, has anyone on verizon done the OTA and kept their root? How did you do it?
First item, this is a question so it should belong in the question and answer threads! Secondly look here http://forum.xda-developers.com/showthread.php?t=2466191
Sent on my Moto X
Sorry, and thanks! I'll probably give this a shot, make that camera work a little better...
You can always install the SafeStrap ROM here. That's what I did.
http://forum.xda-developers.com/showthread.php?t=2484908
[Rom] [VZW] SafeStrap 139.12.57
Sent from my Moto X
The way that everyone (including myself) have been updating and keeping root on Verizon is as followed:
1. RSD back to stock (instructions here: http://forum.xda-developers.com/showthread.php?t=2446515)
2. Install PwnMyMoto and DO NOT RUN IT
3. Download and install OTA
4. When the install completes, your phone will reboot a few times. This is just PwnMyMoto doing its magic.
5. Profit.
dymmeh said:
The way that everyone (including myself) have been updating and keeping root on Verizon is as followed:
1. RSD back to stock (instructions here: http://forum.xda-developers.com/showthread.php?t=2446515)
2. Install PwnMyMoto and DO NOT RUN IT
3. Download and install OTA
4. When the install completes, your phone will reboot a few times. This is just PwnMyMoto doing its magic.
5. Profit.
Click to expand...
Click to collapse
This method makes it so SafeStrap is no longer available though, right? If that's not the case then... Don't know what I've been waiting for!
Sent from my Moto X
mercado79 said:
This method makes it so SafeStrap is no longer available though, right? If that's not the case then... Don't know what I've been waiting for!
Sent from my Moto X
Click to expand...
Click to collapse
I searched around and can't really find an answer to that. I don't use SafeStrap so I have no idea. I'd assume you can try the method I posted and try using SafeStrap after. If that doesn't work then just RSD back to pre-update and hang on to SafeStrap until it's figured out. No guarantees if it'd work / break stuff, though. You'd be the guinea pig for that one.
dymmeh said:
I searched around and can't really find an answer to that. I don't use SafeStrap so I have no idea. I'd assume you can try the method I posted and try using SafeStrap after. If that doesn't work then just RSD back to pre-update and hang on to SafeStrap until it's figured out. No guarantees if it'd work / break stuff, though. You'd be the guinea pig for that one.
Click to expand...
Click to collapse
@jcase Any chance you can answer this for us? Just cause someone was able to keep root (the one shot kind you mentioned), does that mean that using RSD is still on the table?
Sent from my Moto X
mercado79 said:
@jcase Any chance you can answer this for us? Just cause someone was able to keep root (the one shot kind you mentioned), does that mean that using RSD is still on the table?
Sent from my Moto X
Click to expand...
Click to collapse
If you take the OTA you dont have wY to revert to old stock Motorola block the reverts already and @jcase already said that he will be back for root in this device till 4.3 is out
Sent from my XT1060 using Tapatalk
juancaperez2000 said:
If you take the OTA you dont have wY to revert to old stock Motorola block the reverts already and @jcase already said that he will be back for root in this device till 4.3 is out
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
That's what I thought too. Thanks.
MikeyNick said:
All,
Has anyone on Verizon done the OTA update and kept root? From what I've been reading, sounds like if you rooted with MotoRoot then you're okay, but not if you used PwnMyMoto.
As far as people getting a bootloop, that does make some sense because the recovery partition is really just the boot image... So I can flash the stock recovery to the recovery partition before running the update, and that should theoretically prevent a bootloop. However, if this is going to erase my root, then I don't want to do the update.
So, has anyone on verizon done the OTA and kept their root? How did you do it?
Click to expand...
Click to collapse
For sure have I just updated my Moto X the other day on VZW and kept root. Here is a link to the process on how to do it
http://forum.xda-developers.com/showthread.php?t=2466191
will2live said:
For sure have I just updated my Moto X the other day on VZW and kept root. Here is a link to the process on how to do it
http://forum.xda-developers.com/showthread.php?t=2466191
Click to expand...
Click to collapse
I think that's not up for debate. The issue is that even though you kept root, you're now blocked from using safestrap or ever gaining root again in the future (once another ota comes through). The update has now patched root going forward and it sounds like you won't be able to keep it after this update.
MikeyNick said:
All,
Has anyone on Verizon done the OTA update and kept root? From what I've been reading, sounds like if you rooted with MotoRoot then you're okay, but not if you used PwnMyMoto.
As far as people getting a bootloop, that does make some sense because the recovery partition is really just the boot image... So I can flash the stock recovery to the recovery partition before running the update, and that should theoretically prevent a bootloop. However, if this is going to erase my root, then I don't want to do the update.
So, has anyone on verizon done the OTA and kept their root? How did you do it?
Click to expand...
Click to collapse
mercado79 said:
I think that's not up for debate. The issue is that even though you kept root, you're now blocked from using safestrap or ever gaining root again in the future (once another ota comes through). The update has now patched root going forward and it sounds like you won't be able to keep it after this update.
Click to expand...
Click to collapse
Safestrap i know about and dont care about as i dont use it. As for moving forward with root I'll be surprised if that is the case but I wont disagree either. It is very possible they patch something to actually block root down the road. From my understanding tho currently the patch is blocking ppl to root the update not keeping root if the process is followed correctly. My guess is odds are it will be the same on the next OTA just like we had to do on the original Razr line to keep root until the bootloader was unlocked. However if the next OTA is 4.3 tha tcould all change for sure as anything is possible. Even so when that time comes I'll just unlock mine. I do have a Dev edition i just haven't unlocked with it being brand new and not wanting to void warranty yet to make sure hardware is cool but i do want root so i went the long route for now is all.
dymmeh said:
The way that everyone (including myself) have been updating and keeping root on Verizon is as followed:
1. RSD back to stock (instructions here: http://forum.xda-developers.com/showthread.php?t=2446515)
2. Install PwnMyMoto and DO NOT RUN IT
3. Download and install OTA
4. When the install completes, your phone will reboot a few times. This is just PwnMyMoto doing its magic.
5. Profit.
Click to expand...
Click to collapse
So I installed PwnMyMoto, SuperSU and OTA Root Keeper, then decided not to root. I installed the Verizon update and boom, I'm rooted. Is that what you're saying is needed? I was surprised that root apps all work fine for me, I really didn't do anything but install those apks before I installed the camera update!
boardrx182 said:
So I installed PwnMyMoto, SuperSU and OTA Root Keeper, then decided not to root. I installed the Verizon update and boom, I'm rooted. Is that what you're saying is needed? I was surprised that root apps all work fine for me, I really didn't do anything but install those apks before I installed the camera update!
Click to expand...
Click to collapse
As long as you had PwnMyMoto and never ran it / not rooted you were good to go. SuperSU could be installed before or after. I dont think OTA Root Keeper was needed at all. PwnMyMoto runs after a reboot so once you installed the OTA and rebooted it did its rooting magic automatically for you. Glad it all worked out for you
dymmeh said:
The way that everyone (including myself) have been updating and keeping root on Verizon is as followed:
1. RSD back to stock (instructions here: http://forum.xda-developers.com/showthread.php?t=2446515)
2. Install PwnMyMoto and DO NOT RUN IT
3. Download and install OTA
4. When the install completes, your phone will reboot a few times. This is just PwnMyMoto doing its magic.
5. Profit.
Click to expand...
Click to collapse
dymmeh said:
As long as you had PwnMyMoto and never ran it / not rooted you were good to go. SuperSU could be installed before or after. I dont think OTA Root Keeper was needed at all. PwnMyMoto runs after a reboot so once you installed the OTA and rebooted it did its rooting magic automatically for you. Glad it all worked out for you
Click to expand...
Click to collapse
That's awesome, didn't realize that would happen automatically. I completely expected that I'd have to complete the entire root process steps that were outlined in an earlier post if I wanted root. Thanks for the reply.
will2live said:
Safestrap i know about and dont care about as i dont use it. As for moving forward with root I'll be surprised if that is the case but I wont disagree either. It is very possible they patch something to actually block root down the road. From my understanding tho currently the patch is blocking ppl to root the update not keeping root if the process is followed correctly. My guess is odds are it will be the same on the next OTA just like we had to do on the original Razr line to keep root until the bootloader was unlocked. However if the next OTA is 4.3 tha tcould all change for sure as anything is possible. Even so when that time comes I'll just unlock mine. I do have a Dev edition i just haven't unlocked with it being brand new and not wanting to void warranty yet to make sure hardware is cool but i do want root so i went the long route for now is all.
Click to expand...
Click to collapse
people who have moto employee friends say they are moving to 4.3 next. Also, there may be a work around for you to keep root with the next release, but because people who aren't on dev phones that must be sure they can retain root would not have used this method (as it is a one chance type of method). so it is more likely that any new workarounds that people come up with will be for those that still have the ability to downgrade to original stock firmware. Also, SS is nice because it gives you the ability to run the phone just like you normally would but you can create complete backups of the device so you don't have to set everything up all over again if you screw something up with your phone. Even if you don't use SS for flashing roms it is still useful for back ups.
jayboyyyy said:
people who have moto employee friends say they are moving to 4.3 next. Also, there may be a work around for you to keep root with the next release, but because people who aren't on dev phones that must be sure they can retain root would not have used this method (as it is a one chance type of method). so it is more likely that any new workarounds that people come up with will be for those that still have the ability to downgrade to original stock firmware. Also, SS is nice because it gives you the ability to run the phone just like you normally would but you can create complete backups of the device so you don't have to set everything up all over again if you screw something up with your phone. Even if you don't use SS for flashing roms it is still useful for back ups.
Click to expand...
Click to collapse
I have my Moto contacts and yes they are moving to 4.3 next last i was told when I asked. As for downgrading stock software that isn't going to happen once updated as you can't go backwards. Moto devices have been that way going back to the original Droid Razr. Its few and far between where you could actually go backwards after an OTA. So unless you mean stock of the current build installed then ppl will have issues for sure. That said if ppl OTA and have root now but for whatever reason need to use the new fastboot file that was just posted they will in fact be SOL for gaining root. This is exactly why I refuse to buy consumer units from the carrier besides a few other reason I wont go into. My theory is simple we want to mess with device buy an unlockable one or be ready to suffer/wait for an exploit after an OTA hits.
As far as root moving forward what process you talking about tho? There is 2 ways to do it. The one posted right above your post in this thread, or the link I posted above. If the info in this thread was used yes there may be an issue because of the patch. However I will be very surprised to see ppl not be able to keep root if they updated using the process in the link I posted above. Besides having to fastboot the boot.img to recovery in that process its the same way original Droid Razr owners had to update to be able to keep root if there was no root process for the OTA being pushed. Moving forward my guess is there will be an issue once 4.3 hits tho. I'm not sure you will be able to use the old kernel from 4.2.2 to overwrite recovery and boot the 4.3 /system so you can restore root and pull the actual 4.3 boot.img so that can be used for the recovery highjack. Bottom line is only time will tell at this point as you never know what Moto/Google will do with the next update.
Agreed on SS for backups even if not flashing ROMs, but personally i just dont mess with my device enough to worry about a full back i guess. For apps/settings I just use MyBackup PRO. I've also have an app a buddy made that creates a full XML if i wanted to use it. In the old days I use to make alot of backups for ROM flashing when I used SS. Guess in my old age I've just got lazy and dont worry about it that much anymore. I really hose the device I'll just swap to one of my others til i get back to fixing the messed up one.
will2live said:
I have my Moto contacts and yes they are moving to 4.3 next last i was told when I asked. As for downgrading stock software that isn't going to happen once updated as you can't go backwards. Moto devices have been that way going back to the original Droid Razr. Its few and far between where you could actually go backwards after an OTA. So unless you mean stock of the current build installed then ppl will have issues for sure. That said if ppl OTA and have root now but for whatever reason need to use the new fastboot file that was just posted they will in fact be SOL for gaining root. This is exactly why I refuse to buy consumer units from the carrier besides a few other reason I wont go into. My theory is simple we want to mess with device buy an unlockable one or be ready to suffer/wait for an exploit after an OTA hits.
As far as root moving forward what process you talking about tho? There is 2 ways to do it. The one posted right above your post in this thread, or the link I posted above. If the info in this thread was used yes there may be an issue because of the patch. However I will be very surprised to see ppl not be able to keep root if they updated using the process in the link I posted above. Besides having to fastboot the boot.img to recovery in that process its the same way original Droid Razr owners had to update to be able to keep root if there was no root process for the OTA being pushed. Moving forward my guess is there will be an issue once 4.3 hits tho. I'm not sure you will be able to use the old kernel from 4.2.2 to overwrite recovery and boot the 4.3 /system so you can restore root and pull the actual 4.3 boot.img so that can be used for the recovery highjack. Bottom line is only time will tell at this point as you never know what Moto/Google will do with the next update.
Agreed on SS for backups even if not flashing ROMs, but personally i just dont mess with my device enough to worry about a full back i guess. For apps/settings I just use MyBackup PRO. I've also have an app a buddy made that creates a full XML if i wanted to use it. In the old days I use to make alot of backups for ROM flashing when I used SS. Guess in my old age I've just got lazy and dont worry about it that much anymore. I really hose the device I'll just swap to one of my others til i get back to fixing the messed up one.
Click to expand...
Click to collapse
3 ways to maintain root are the one in the thread, SS, and the one you posted. The one you posted actually allows you to flash the original stock firmware on the phone because the BL was never touched thus the security (keeping you from downgrading) was never installed. That was what I was referring to when I said those that must make sure they will retain root in the future would not have done the install pwnmymmoto without running then take ota then run pwnmymoto. As you said those people will be screwed if the next root requires you to flash back to original stock or use part of the pwnmymoto exploit that will only be accessible to those that got the OTA with SS or the link you posted. I don't toy with my phone as much as I used to especially this one, but bypasing exchange security is pretty essential for me. I don't want an encrypted device with mandatory pin. I never lose my phone and I would know within minutes of losing it if i ever did so I could shut it down remotely.
And I'm not sure about the new kernel situation either. This is why I wanted to make sure I could go back to original firmware as I see that being our best bet to retain root through 4.3, assuming jcase doesn't release another exploit for it to get some cash.
jayboyyyy said:
3 ways to maintain root are the one in the thread, SS, and the one you posted. The one you posted actually allows you to flash the original stock firmware on the phone because the BL was never touched thus the security (keeping you from downgrading) was never installed. That was what I was referring to when I said those that must make sure they will retain root in the future would not have done the install pwnmymmoto without running then take ota then run pwnmymoto. As you said those people will be screwed if the next root requires you to flash back to original stock or use part of the pwnmymoto exploit that will only be accessible to those that got the OTA with SS or the link you posted. I don't toy with my phone as much as I used to especially this one, but bypasing exchange security is pretty essential for me. I don't want an encrypted device with mandatory pin. I never lose my phone and I would know within minutes of losing it if i ever did so I could shut it down remotely.
And I'm not sure about the new kernel situation either. This is why I wanted to make sure I could go back to original firmware as I see that being our best bet to retain root through 4.3, assuming jcase doesn't release another exploit for it to get some cash.
Click to expand...
Click to collapse
Gotchya, makes total sense now what you are saying. I think there is just confusion at times when talking about root & OTA because of different ways to do it in a case like this device. Being a Moto guy for so long tho i'm use to all the BS they throw at us.....lol. That said that is why i posted the link I did. Imho it's a bad plan to update using the other method of installing pwnmymoto and not running it first before taking the OTA. Doing the process to protect root before updating is a much safer bet atm imo. Sure its a little more work but at the end of the day you dont have to be worried as much moving forward. Only concern I have still for doing it the longer way is if that process will work when they push out 4.3. It had alot of changes in it so lord only knows what will be up for keeping root. And really in my case its no concern but for all the folks with consumer version it is still a concern i think for the time being

[Q] Can I update? Confused by so many unclear posts.

Background information:
Bought the AT&T version when it came out right away
Got root the first time it was released
Updated root when next update came out ( Didn't know if I need to )
OTA has been Frozen since I got the phone
Is it safe for me? Should I go back to the first version and then update?
Trust me I've read the posts and since I know there have been some issues on the Verizon side I wasn't sure if that was something that was effecting AT&T too. If some one could please give me an explain of that to it would be extremely helpful as I like to know my **** so I can help others.
Thanks
Icon000 said:
Background information:
Bought the AT&T version when it came out right away
Got root the first time it was released
Updated root when next update came out ( Didn't know if I need to )
OTA has been Frozen since I got the phone
Is it safe for me? Should I go back to the first version and then update?
Trust me I've read the posts and since I know there have been some issues on the Verizon side I wasn't sure if that was something that was effecting AT&T too. If some one could please give me an explain of that to it would be extremely helpful as I like to know my **** so I can help others.
Thanks
Click to expand...
Click to collapse
Flash back to stock via RSDLite. Let it boot up. Get your gmail setup.
When the prompt comes up, DL the .54 update. Install.
Root with jcase's new root method.
Or you could just install safestrap. Install a ROM with the camera update and not worry about it until kitkat comes around.
Sent from non rooted motoX :'(
I'm not really interested in updating to another Rom unless it has the touchless controls or something really interesting. Touchless Controls is one of the main reasons I got this phone next to battery life.
Is Safestrap finally settled down? I feel like last time I check there were still messages about bugs and other issues?
matt99017d said:
Flash back to stock via RSDLite. Let it boot up. Get your gmail setup.
When the prompt comes up, DL the .54 update. Install.
Root with jcase's new root method.
Or you could just install safestrap. Install a ROM with the camera update and not worry about it until kitkat comes around.
Sent from non rooted motoX :'(
Click to expand...
Click to collapse
Icon000 said:
I'm not really interested in updating to another Rom unless it has the touchless controls or something really interesting. Touchless Controls is one of the main reasons I got this phone next to battery life.
Is Safestrap finally settled down? I feel like last time I check there were still messages about bugs and other issues?
Click to expand...
Click to collapse
the only rom out for SS that i am aware of is just a ported tmobile rom for vzw phones that has the update built in. Basically it is just the OTA stock rom running on SS. This is what I am using currently. Not sure if it flashable for ATT phones, but I'm sure there is some workaround there. Or maybe the OP on that thread can make a ATT one if you asked him. SS is stable as of now. Haven't had any new updates to it because no one is having any problems currently (at least with moto x devices).
For your question pertaining to options for taking the OTA. There are 4 methods now.
1. SS method described above
2. use the thread called something like "keep root through the OTA." It basically takes the ota without updating the BL so you can still downgrade to your stock original FW that you are on now. It's the same thing as the SS method because SS also does not udpate the BL, but you won't be using SS for this method obviously.
3. you can flash recovery.img (and system.img if you need to) or just RSD, then install pwnmymoto without running it, then take the ota and pwnmymoto will root the phone automatically after the ota is taken. you won't be able to downgrade your FW anymore with this method.
4. you can just take the ota (also must flash or use rsd to take it obviously) and then use jcase's rockmymoto root exploit. This uses adb commands and telnet stuff. Not too difficult but if you are unfamiliar with all of that then it will take at least some reading. There is also a thread out there for windows users that simplifies it pretty well.
For future Kit kat root. it is still up in the air what will happen with that. I chose to use SS because it was easy. quick. and allows me to make nandroids. I also like knowing that I can still flash to original stock FW in case that might be necessarry for getting root on kit kat. This seems less likely now that jcase created a root method for the OTA that is out, but I'm still just playing it safe personally, even if it might be pointless now.

[Q]I'm not a noob, not yet a woman..i mean, expert.

Hello!
Recently jumped shipped to AT&T moto x and am absolutely loving it. I was perusing around the forum, and really wanted to ask some questions on a specific thread but due to the fear and anxiety of sounding dumb and wasting everyone else's time, I'm just posting a question here hoping that even stupid questions are answered with lots of love. I'm pretty comfortable with rooting, flashing.....aka I'm really good at following instructions, but would really like to expand my knowledge further and am having difficult time getting the explanations I need. SO, hoping some kind soul on here with AT&T Moto X will answer my questions in one shot.
Since my Moto X automatically updated with the new camera update via OTA when I got it four days ago, I was able to successfully root it using JCase's new RockMyMoto method. So, now I'm rooted - great. Everything is set up perfectly the way I want. Then now I find out that AT&T 4.4 is leaked, meaning it's probably going to be ready for an OTA update in the near future (I'm not planning on using the leaked one). So my questions are as follows...
1. I'm going to keep mine rooted until AT&T has 4.4 available for OTA update. Can I simply just run that update when it's available (which will break the root), then just re-root it when that's also available (which it seems like will be rather soon according to Jcase's tweet...)? Or will running the OTA update on my rooted moto x cause more issues other than simply breaking the root? Should I be going back to stock, get the OTA update, THEN re-root it?
2. My understanding is that AT&T boot loader is still locked down...so to my limited knowledge, this means I'm not able to make a NANDROID back up using CWM...am I wrong here in any way? Is there a way to make a NANDROID-like back up (which I used to back in S3 days) without having my bootloader unlocked?
3. Tethering...I was able to use FoxFi fine on my S3 (I got that good old granfathered unlimited data plan....), but it does not seem to work on my new Moto X. Is there any known work around for this? I have Titanium Backup Pro as well, so thought I could maybe just freeze the tether provision or w/e by AT&T but seems like I'm also somehow misunderstanding that there as no such thing seems to exist.
Thanks,
Yoondroid
I can only respond to your first question. You can not take an ota while rooted. The exploit breaks the stock recovery. In order to take the update, you'll have to fastboot the factory images to revert to an in rooted state and then accept the ota. It's really easy and only takes a few minutes... Assuming you have adb set up and know how to use it, if not, an hour or so if searching and reading will get you up to speed.
Sent from my XT1058 using XDA Premium 4 mobile app
theraffman said:
I can only respond to your first question. You can not take an ota while rooted. The exploit breaks the stock recovery. In order to take the update, you'll have to fastboot the factory images to revert to an in rooted state and then accept the ota. It's really easy and only takes a few minutes... Assuming you have adb set up and know how to use it, if not, an hour or so if searching and reading will get you up to speed.
Sent from my XT1058 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You can also just flash the recovery.img back and take the OTA update while rooted.
You can install safestrap to make a backup and WiFi tether root works with some minor changes there's a thread somewhere.
Hmm, thanks guys I'll be checking out/learning more about the fastboot option
As for tethering, I've found some good information though for the first option, I haven't figured out a way to patch the at&t apk OP posted in his thread. Seems like quite the ingenious work around though, so hopefully I'll be able to figure it out soon! The second option seems to be a quick work around to get tethering to work, but seems way less secure...and I'll be using tethering to do work which I prefer to be on a much secure network, so we'll see.
First (tricking the phone to think it's not an at&t phone when turning on tethering in native app): http://forum.xda-developers.com/showthread.php?t=2443562
Second: http://forum.xda-developers.com/showthread.php?t=2449534&page=3
mandrsn1 said:
You can also just flash the recovery.img back and take the OTA update while rooted.
Click to expand...
Click to collapse
just so the OP is led astray, if you only flash the recovery.img and you have made changes to your system apps or anything in the /system then you won't be able to take the ota and it will likely through you into a BL. If you don't know what you have changed, then go ahead and flash the system.img as well as recovery and you will be good to go. If you know what you changed then uninstall all of your root apps and change everything you change in the /system back to how it was and take the ota (after flashing recovery.img of coarse).
here is a great guide to adb stuff for you as well that got me started. still go back to it for reference occasionally. its a little old but it is still good.
http://forum.xda-developers.com/showthread.php?t=872128

[Q] Safestrap 4.4 or use JCase to root???

I am about to get a Moto X from Verizon and I know it has a locked bootloader
I never dealt with a locked phone in the past and this will be my first moto so I am doing a lot of reading
Correct me if I'm wrong, but I guess the phone will come with 4.2 on it so I'll have two options:
1) Use safestrap and flash 4.4 as a second rom. I am guessing the disadvantage will be loss of disk space for the second rom (maybe other disadvantages, I don't know) but I'll be able to do nandroid backups and flash zips
2) Use the JCase method to root using SlapMyMoto and MotoWpNoMo, etc. (I'll be rooted, but no flashing roms or zips, or nandroid backups)
In that case, which method do you guys really recommend? Do I really need custom roms on this phone since it is almost stock and I can still get xposed to do a lot of the things I'd be interested in with just the root?
If I use the JCase method, do I lose the ability to use safestrap in the future?
Thanks
The moto xs leaving moto maker for Verizon should all be 4.4 at this point. Can't whole heartedly speak to your other questions though.
Sent from my SCH-I925 using Tapatalk
I used to be a flash-o-holic and so far I'm perfectly satisfied with just having root and xposed
sent from my Moto X
I'm rooted, using xposed and gravity box. Very happy with phone. Came from an s3 and have to say I don't miss flashing Roms. Real learning curve for me to root but JCase methods worked perfect and google was my friend through the many steps. Good luck!
Sent from my XT1060 using Tapatalk
SlapMyMoto. You're not gonna want to flash roms on this phone.
Thanks for the replies.
I guess if the phone comes with 4.4 already, I only have the JCase's root option, anyway.
But reading the replies here as well as other threads, I see that most people are pretty content with the stock rom + root + gravitybox/xposed. That's great to know.
I can't wait to get the phone tomorrow
Does Safestrap load 4.4.2 roms now?
aptalca said:
Thanks for the replies.
I guess if the phone comes with 4.4 already, I only have the JCase's root option, anyway.
But reading the replies here as well as other threads, I see that most people are pretty content with the stock rom + root + gravitybox/xposed. That's great to know.
I can't wait to get the phone tomorrow
Click to expand...
Click to collapse
Safestrap works on 4.4 too
But you have to have satestrapped it when you were on the 4.2 bootloader, correct? So if you took an ota or if your phone shipped with 4.4, your bootloader was updated and you can no longer safestrap

lollipop root on G900A discussion

On the G900A shipped from AT&T we have a locked bootloader, and there is no known existing workaround to unlock it correct?
So given that, root was achieved , then safestrap was developed so we can currently flash roms that use the stock bootloader and kernel image, however we can customize the OS as long as the kernel and loader are untouched.
If the bootloader stays locked, what is known regarding safestrap and lollipop?
Can we still rollback the stock kernel to achieve root, then roll forward and keep it?
If that is the case, then when the stock AT&T lollipop is released, some level of ROM development can occur?
I am confused somewhat by all the discussions surrounding this, and didn't see any threads to discuss it specifically.
wmunn said:
On the G900A shipped from AT&T we have a locked bootloader, and there is no known existing workaround to unlock it correct?
So given that, root was achieved , then safestrap was developed so we can currently flash roms that use the stock bootloader and kernel image, however we can customize the OS as long as the kernel and loader are untouched.
If the bootloader stays locked, what is known regarding safestrap and lollipop?
Can we still rollback the stock kernel to achieve root, then roll forward and keep it?
If that is the case, then when the stock AT&T lollipop is released, some level of ROM development can occur?
I am confused somewhat by all the discussions surrounding this, and didn't see any threads to discuss it specifically.
Click to expand...
Click to collapse
No, if you update to lollipop then your ability to have a rooted phone will be lost. The bootloader hasnt changed since the phone was released which is the reason we have been able to rollback the rom. This was a loophole in the original firmware of the s5. When lollipop comes out then it will be a completely different bootloader and will be locked and you will not be able to roll back to kk bootloader. The loophole for this has been patched and there probably wont be another way to root the phone after lollipop considering the guy that found the loophole is now working for googles security team. Bottom line is if you want root then you cant have lollipop.
Sent from my SM-G900A using XDA Free mobile app
miller1821 said:
No, if you update to lollipop then your ability to have a rooted phone will be lost. The bootloader hasnt changed since the phone was released which is the reason we have been able to rollback the rom. This was a loophole in the original firmware of the s5. When lollipop comes out then it will be a completely different bootloader and will be locked and you will not be able to roll back to kk bootloader. The loophole for this has been patched and there probably wont be another way to root the phone after lollipop considering the guy that found the loophole is now working for googles security team. Bottom line is if you want root then you cant have lollipop.
Sent from my SM-G900A using XDA Free mobile app
Click to expand...
Click to collapse
How does this affect our device when it gets the lollipop update?
http://www.xda-developers.com/android/supersu-beta-lollipop-root-stock-kernel/
wmunn said:
On the G900A shipped from AT&T we have a locked bootloader, and there is no known existing workaround to unlock it correct?
So given that, root was achieved , then safestrap was developed so we can currently flash roms that use the stock bootloader and kernel image, however we can customize the OS as long as the kernel and loader are untouched.
If the bootloader stays locked, what is known regarding safestrap and lollipop?
Can we still rollback the stock kernel to achieve root, then roll forward and keep it?
If that is the case, then when the stock AT&T lollipop is released, some level of ROM development can occur?
I am confused somewhat by all the discussions surrounding this, and didn't see any threads to discuss it specifically.
Click to expand...
Click to collapse
Thanks to chainfire the chances of updating to 5.0 while keeping root seems more doable at this point.
However, based on recent samsung updates for other devices, safestrap may stop functioning after the update as it continues its slow death.
Once again, if having root access is important to you, do no not take the 5.0 update when released until some of us have a chance to evaluate it.
Since I am running dynamic Kat on stock slot right now, I should be safe from updates for now right?
Waiting to see what happens with all this. I did back up my stock rom to an SD card, so I can restore and unroot etc... to get an update if I choose to later.
muniz_ri said:
Thanks to chainfire the chances of updating to 5.0 while keeping root seems more doable at this point.
However, based on recent samsung updates for other devices, safestrap may stop functioning after the update as it continues its slow death.
Once again, if having root access is important to you, do no not take the 5.0 update when released until some of us have a chance to evaluate it.
Click to expand...
Click to collapse
was looking for a post like this. well maybe we might get 5.1 in the next few weeks or sooner so i am sure you will give it a try and a good look and hopefully you will have success in attaining root and a good SS. seems like u da man for this...:good::good:
as for 5.1 or a custom rom...well whose to say what that will bring...
will be waiting to see what happens. will check back here when it comes out. i watch for it everyday and as usual, thank you for all your great work!
miller1821 said:
No, if you update to lollipop then your ability to have a rooted phone will be lost. The bootloader hasnt changed since the phone was released which is the reason we have been able to rollback the rom. This was a loophole in the original firmware of the s5. When lollipop comes out then it will be a completely different bootloader and will be locked and you will not be able to roll back to kk bootloader. The loophole for this has been patched and there probably wont be another way to root the phone after lollipop considering the guy that found the loophole is now working for googles security team. Bottom line is if you want root then you cant have lollipop.
Sent from my SM-G900A using XDA Free mobile app
Click to expand...
Click to collapse
Not necessarily, just because (if) the S5 gets 5.0 does not mean the ability to root will be lost just go check out the Verizon S5 forums you'll see they have a method for rooting with 5.0 that in theory should work for us as well. again it is recomended to remain on a 4.4.x rom until this has been fully evaluated.
wmunn said:
On the G900A shipped from AT&T we have a locked bootloader, and there is no known existing workaround to unlock it correct?
So given that, root was achieved , then safestrap was developed so we can currently flash roms that use the stock bootloader and kernel image, however we can customize the OS as long as the kernel and loader are untouched.
If the bootloader stays locked, what is known regarding safestrap and lollipop?
Can we still rollback the stock kernel to achieve root, then roll forward and keep it?
If that is the case, then when the stock AT&T lollipop is released, some level of ROM development can occur?
I am confused somewhat by all the discussions surrounding this, and didn't see any threads to discuss it specifically.
Click to expand...
Click to collapse
My suggestion would be not to take any updates until the root capabilities have been evaluated.
As always, research goes a long way towards alleviating fears and stopping panic attacks before they happen. be patient there are great devs here give them time to work
Well, I stopped using the S5 and switched to a oneplus one, happily running CM12 nightlies now
the att gs5 doesn't seem like it's getting any updates..
wmunn said:
Well, I stopped using the S5 and switched to a oneplus one, happily running CM12 nightlies now
Click to expand...
Click to collapse
How are you liking it? I'm seriously thinking about doing the same thing.
I have a coworker that just got the Lollipop update for his Note 3 so that means it will be coming to the S5 very soon!
There is a pre-rooted lollipop update on droid views "http://www.droidviews.com/install-rooted-lollipop-on-att-galaxy-s5-sm-g900a/" . I have updated already and it runs smoothly. The only thing is after you run the update it can take anywhere from 5 to 20 minutes to reboot so just hang tight.
silentscreamz said:
There is a pre-rooted lollipop update on droid views "http://www.droidviews.com/install-rooted-lollipop-on-att-galaxy-s5-sm-g900a/" . I have updated already and it runs smoothly. The only thing is after you run the update it can take anywhere from 5 to 20 minutes to reboot so just hang tight.
Click to expand...
Click to collapse
I used that method as well. Sure, it worked for me, but I came from Dynamic Kat, a well debloated stock rom. Due to this, after installing the update using this method, the built-in apps restore function could not complete due to having all of the useless bloatware back, taking up the extra space I was free to use in Dynamic Kat. Even removing the apps that are safe to remove via Titanium Backup doesn't help because the space is reserved for them. I've also already moved every app that it will allow to move to SD card. I've removed unneeded apps. I've gone through my internal storage to remove any unneeded files.
I've removed most of the apps listed here
This doesn't give me the Bluetooth tether that I used to us for my Gear 1(Running Null Rom). I'd look for an app to cover this but... I can't install anything because I've got no space to do so... I hope a good debloat method comes along soon. I still have root, so I'm hopeful.
Yea, bloatware is ridiculous for this phone. Have you tried the Alliance rom, that is what I run and it's not to bad for bloatware but I have only managed to get 5.6 running. Going to try version 8 today sometime. If you like to customize that is an awesome rom.
Hi folks, new to the S5 forums on here as I just upgraded from my trusty S3 on AT&T. I'm still on the stock 4.4.2 firmware, NG3 build, and I'm wondering if I should just root from here using TowelRoot method or take the 4.4.4 OTA and root from there.
Root your 4.4.2, then use the update while saving root to lollipop and skip 4.4.4 all together.
SoCalHTCFuze said:
Root your 4.4.2, then use the update while saving root to lollipop and skip 4.4.4 all together.
Click to expand...
Click to collapse
I tried to root using TowelRoot but it said device not supported. I'll do some research though. Havent even had the phone 5 hours yet.
MetalHead66 said:
I tried to root using TowelRoot but it said device not supported. I'll do some research though. Havent even had the phone 5 hours yet.
Click to expand...
Click to collapse
You gotta downgrade theres a post on here just type it in the search bar. Pretty easy process
Yes. Follow the 4.4.2 how to root thread, it says that bit still works.
OK thanks a bunch. Getting ready to do that now.
---------- Post added at 03:27 AM ---------- Previous post was at 02:53 AM ----------
Well that was quite easy and I'm a happy camper now! Just had to flash nd3 kernel with odin in order for TR to work then flash my ng3 kernel. So nice to be able to use TiBu. Helium wouldnt install all my apps. Now I can start freezing and uninstalling all the bloatware!

Categories

Resources