[RECOVERY] Team Win Recovery Project (TWRP) - Galaxy Tab 2 (Unified 7" + 10.1") Android Developm

Team Win Recovery Project 3.x​
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
One recovery to rule them all:
The common TWRP is compatible with GT-P3100, GT-P3110, GT-P3113, GT-P5100, GT-P5110 and GT-P5113 at the same time.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or lost Data!
* Please do some research if you have any concerns about this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* If you dont like this recovery: Stay away from this thread!
*/
Download:
http://andi34.github.io/recoveries_tab2.html
Note:
The new "Common TWRP" won't be able to flash Roms compiled before 22.03.2016.
Important links:
https://twrp.me - official TWRP page
https://twrp.me/FAQ - official FAQ
http://andi34.github.io/faq.html - FAQ by myself
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDA:DevDB Information
[unified] TWRP, Tool/Utility for the Samsung Galaxy Tab 2
Contributors
Android-Andi
Version Information
Status: Stable
Created 2016-09-18
Last Updated 2016-09-18

Reserved
DEVICE SPECIFIC TWRP
Device specific TWRP are discontinued!
Please note: our kernel detects your Tab2 variant at boot and chooses the right driver and config for your device! In some cases (e.g. if the mainboard or the screen got replaced) your device variant isn't detected right and it will use wrong driver!
I am not sure how many user are affected, but in such case we can skip the intelligent board detection and hardcode the variant.
Attached device specific TWRP should work to flash latest Android 7 builds.
Feel free to buy me a coconut water if it helped you to keep your Tab still, after many years, almost up to date.

Old recovery threads have been closed because device specific recoveries are discontinued and cwm & philz touch are not maintained anymore.
Let's keep this thread on topic here please:
- No rom questions
- no questions about other recoveries
- make sure posting a recovery.log, maybe dmesg if you have issues on this common twrp
~ All my work, news etc. on http://andi34.github.io ~

Thank you Andi for your kindness... I don't see twrp 3.0.2.5 in your files. Is it OK to install it

zidane01 said:
Thank you Andi for your kindness... I don't see twrp 3.0.2.5 in your files. Is it OK to install it
Click to expand...
Click to collapse
Yeah, it is ok. I'll upload it tomorrow to androidfilehost. It was a quick test to check if eMMC 4.5 work fine (some tab2 seem to have newer emmc, because of that current twrp wasn't able to use the emmc and flashing wasn't possible. Its also the reason why latest builds don't boot on some tab2 and getting only a black screen).
~ All my work, news etc. on http://andi34.github.io ~

hey man, thank you for the recovery and ROM. I am currently running the official kitkat cyanogenmod on the old recovery. So to install and use this recovery, do I just flash it using the current recovery, or is there some other steps i need to follow?

arnavb8 said:
hey man, thank you for the recovery and ROM. I am currently running the official kitkat cyanogenmod on the old recovery. So to install and use this recovery, do I just flash it using the current recovery, or is there some other steps i need to follow?
Click to expand...
Click to collapse
right, you can flash it with your current recovery (if you download the zip)

arnavb8 said:
hey man, thank you for the recovery and ROM. I am currently running the official kitkat cyanogenmod on the old recovery. So to install and use this recovery, do I just flash it using the current recovery, or is there some other steps i need to follow?
Click to expand...
Click to collapse
Just flash it via current recovery :good:

Hello! Thank you for your good work, Android-Andi
Anyway, I'm just asking. Does everytime I update my CM13, do I also need to re-flash the Common TWRP? (Flash TWRP > Update CM13 > Flash TWRP again)

Kursem said:
Hello! Thank you for your good work, Android-Andi
Anyway, I'm just asking. Does everytime I update my CM13, do I also need to re-flash the Common TWRP? (Flash TWRP > Update CM13 > Flash TWRP again)
Click to expand...
Click to collapse
no not needed

Perfect & faster recovery 3.0.2-6.... Works very correctly for me ... Ty Andi

TWRP 3.0.2-7 uploaded
- Update the ext-csd.rev check for eMMC5.1 (fixes emmc detection for some tab2)

Hey everyone., how to install twrp in tablet,,?

jimwel said:
Hey everyone., how to install twrp in tablet,,?
Click to expand...
Click to collapse
Do u know how to use Odin?
If yes, flash twrp using Odin

ok, I know how to use odin, but am I flashing the twrp tar.md5 file only or is there something else I'm supposed to be flashing? can't find a thorough guide for rooting the galaxy tab 2 7.0 p3113

You can read here
BlaineLondon said:
ok, I know how to use odin, but am I flashing the twrp tar.md5 file only or is there something else I'm supposed to be flashing? can't find a thorough guide for rooting the galaxy tab 2 7.0 p3113
Click to expand...
Click to collapse
http://forum.xda-developers.com/sitesearch.php?q=How to root p3113 (here is wrong thread for this )
---------- Post added at 18:55 ---------- Previous post was at 18:47 ----------
jimwel said:
Hey everyone., how to install twrp in tablet,,?
Click to expand...
Click to collapse
Take zip twrp , sent zip to SD & install via recovery...Or take .tar-md5 file and flash it with Odin... From here by Andi : https://andi34.github.io/recoveries_tab2.html (you must read first)

Windows Defender detected a Trojan in the latest TWRP zip (3.0.2-8).
https://www.androidfilehost.com/?w=...d44fd3d141077f60723133fd33b53c552b55892a840a0
Not sure if it's a false positive, or if maybe the Android File Host mirror was infected.
Update: I searched the md5 in VirusTotal and it came up clean
https://www.virustotal.com/en/file/...86575991df34d1ebd93aaf4a6fea9bf9f4c/analysis/
I also redownloaded the zip file a 2nd time, with no virus warning. So looks like it was a false alarm.

I use 3.0.3-0 .... Excellent ! Thanks Andi

I have tried the common 3.0.3-0 on my tab 2 7.0 (p3110) but it installs larger than the screen and the touch wont work, connected mouse to OTG but nothing would work. ended up forcing a shutdown and reflash old version.

peeko1979 said:
I have tried the common 3.0.3-0 on my tab 2 7.0 (p3110) but it installs larger than the screen and the touch wont work, connected mouse to OTG but nothing would work. ended up forcing a shutdown and reflash old version.
Click to expand...
Click to collapse
Sounds like your bootloader makes trouble.
Edit:
https://androidfilehost.com/?w=files&flid=37700
Flash the one for your device using Odin.
Gesendet von meinem A0001 mit Tapatalk

Related

[MOD][Feb 15] MultiROM v31x

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
MultiROM is one-of-a-kind multi-boot mod for Nexus 7. It can boot any Android ROM as well as other systems like Ubuntu Touch, Plasma Active, Bohdi Linux or WebOS port.Besides booting from device's internal memory, MultiROM can boot from USB drive connected to the device via OTG cable. The main part of MultiROM is a boot manager, which appears every time your device starts and lets you choose ROM to boot. You can see how it looks on the left image below and in gallery. ROMs are installed and managed via modified TWRP recovery. You can use standard ZIP files to install secondary Android ROMs, daily prebuilt image files to install Ubuntu Touch and MultiROM even has its own installer system, which can be used to ship other Linux-based systems.
Features:
* Multiboot any number of Android ROMs
* Restore nandroid backup as secondary ROM
You can also watch a video which shows it in action.
Click to expand...
Click to collapse
WARNING
It is dangerous. This whole thing is basically one giant hack - none of these systems are made with multibooting in mind. It is no longer messing with data partition or boot sector, but it is possible that something goes wrong and you will have to flash factory images again. Make backups. Always.
Click to expand...
Click to collapse
NOTES
I'm not responsible for anything.
I just compiled it, the hard work was done by the people in the credits section. Please support them.
Please post bugs
Installation with Sony Stock ROM
Your bootloader must be unlocked for this to work.
Make a backup
Flash custom boot.img (fastboot flash boot boot_stock_windy.img / fastboot flash boot boot_stock_pollux.img
Install multirom.zip
Installation with OmniROM
Make a backup
Install OmniRom
Install multirom.zip
more detailed
Make a backup from your recovery
Install a Rom with kexec-hardboot support from recovery
Install multirom.zip from TWRP
Reboot to recovery
Install second ROM from recovery (Advanced -> MultiROM -> Add ROM)
You now have a Xperia Tablet Z with multiboot
Source
MultiROM: https://github.com/pollonamid/multirom
Kernel: https://github.com/omnirom/android_kernel_sony_apq8064
TWRP: https://github.com/XperiaMultiROM/android_bootable_recovery
Click to expand...
Click to collapse
CREDITS
Tasssadar - MultiROM and modified TWRP
Olivier - MultiROM port to Xperia Z
Olivier and Everyone else mentioned here - KEXEC hardboot porting to Xperia Z and Tablet Z
skiwong 20 - building builds while I was away
OmniROM
Click to expand...
Click to collapse
Downloads
Pollux
multirom.zip
Pollux_windy
WARNING! - I don't own this device, so it's untested.
multirom.zip
XDA:DevDB Information
MultiROM v31x pollux, Tool/Utility for the Sony Xperia Tablet Z
Contributors
pollonamid
Version Information
Status: Testing
Created 2014-08-26
Last Updated 2015-02-15
Reserved
Changelog:
26/08/2014 - First release
16/09/2014 - No need to install recovery seperately
21/09/2014 - fixed list rom-view in recovery
Reserved
Supported internal ROMs:
Pollux_Windy
OmniROM
PAC-Man (thanks to skiwong20)
Sony Stock 10.5.1.A.0.xxx Flash this kernel
Pollux
OmniROM
PAC-Man (thanks to skiwong20)
Sony Stock 10.5.1.A.0.xxx Flash this kernel
nice to see multirom here too!
i´ve build it for my own (pollux windy _ aosb) but aosb code isn´t
ready yet, so i decided to hold it till aosb 1.3.7 will be released!
NICE WORK!!!
c0llal0 said:
nice to see multirom here too!
i´ve build it for my own (pollux windy _ aosb) but aosb code isn´t
ready yet, so i decided to hold it till aosb 1.3.7 will be released!
NICE WORK!!!
Click to expand...
Click to collapse
Wow, awesome!
Hi,
Installed multirom yesterday, so far its working, but when i try to add a rom in twrp (then advanced-multirom) i see a screen with something like what type of rom do you want to install, then i select android and then its stuck. No next button or something noting works anymore and I need to reset
Sent from my HTC One_M8 using XDA Free mobile app
Dutchdeveloper said:
Hi,
Installed multirom yesterday, so far its working, but when i try to add a rom in twrp (then advanced-multirom) i see a screen with something like what type of rom do you want to install, then i select android and then its stuck. No next button or something noting works anymore and I need to reset
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, I know this bug. Multirom-TWRP doesn't work in landscape currently. You have to change it to landscape. So, go to Settings -> Screen and set rotation to 90.
Hi !
Nice to see a working Multiboot.
Could you help me ?
My SGP311 is flashed with newest Omnirom nightly with "normal" TWRP,
What exactly i have to do to Update to Multirom and to install cm11 as second android ??
Can i do all steps without PC ?
phillipssat said:
Hi !
Nice to see a working Multiboot.
Could you help me ?
My SGP311 is flashed with newest Omnirom nightly with "normal" TWRP,
What exactly i have to do to Update to Multirom and to install cm11 as second android ??
Can i do all steps without PC ?
Click to expand...
Click to collapse
Hi
I updated the installation instructions and made the more detailed. Hope it helps.
Currently it's not possible to install without a pc, sorry.
pollonamid said:
Hi
I updated the installation instructions and made the more detailed. Hope it helps.
Currently it's not possible to install without a pc, sorry.
Click to expand...
Click to collapse
Does it split main partition to install 2nd ROM separately? Or where second ROM stores it data?
pollonamid said:
Hi
I updated the installation instructions and made the more detailed. Hope it helps.
Currently it's not possible to install without a pc, sorry.
Click to expand...
Click to collapse
@pollonamid I flashed your boot for pollux_windy but the recovery is the normal TWRP without multirom, any ideas what i'm doing wrong?
//can you share recovery img so i can flash like this? --> http://teamw.in/project/twrp2/185
Rootk1t said:
Does it split main partition to install 2nd ROM separately? Or where second ROM stores it data?
Click to expand...
Click to collapse
No. It stores the data in the multirom folder on the internal sd-card. You can read more in the original multirom thread http://forum.xda-developers.com/showthread.php?t=2011403
@pollonamid
can i request assistance here? I'm doing something wrong? Can you post recovery.img?
EsEnZeT said:
@pollonamid
can i request assistance here? I'm doing something wrong? Can you post recovery.img?
Click to expand...
Click to collapse
Here you go. Had to compile it. I will upload a new boot.img later, too. Could be that I uploaded the false one. Sorry.
https://www.androidfilehost.com/?fid=23622183712465782
Hi !
Whats about this App ?
https://play.google.com/store/apps/details?id=com.tassadar.multirommgr&hl=de
Does it run on SGP-311 with your Multiboot ??
pollonamid said:
Here you go. Had to compile it. I will upload a new boot.img later, too. Could be that I uploaded the false one. Sorry.
https://www.androidfilehost.com/?fid=23622183712465782
Click to expand...
Click to collapse
That means, this is OK for pollux-windy and your link on your first posting is not OK ??
Better to Update your first posting ??
phillipssat said:
Hi !
Whats about this App ?
https://play.google.com/store/apps/details?id=com.tassadar.multirommgr&hl=de
Does it run on SGP-311 with your Multiboot ??
Click to expand...
Click to collapse
Didn't try yet. Try it and tell us if it works, please.
phillipssat said:
That means, this is OK for pollux-windy and your link on your first posting is not OK ??
Better to Update your first posting ??
Click to expand...
Click to collapse
Thank you for pointing this out. I just forgot it. lol
https://www.androidfilehost.com/?fid=23622183712465782 is a recovery.img. Don't flash it to boot partition.
I updated the OP with the new link.
What happens after a nightly omnirom update which updates the recovery (TWRP) ??
Update 2014-09-04 will change TWRP !?
http://omni.cmxlog.com/4.4/pollux_windy/
Do i have to flash your files again ??
phillipssat said:
What happens after a nightly omnirom update which updates the recovery (TWRP) ??
Update 2014-09-04 will change TWRP !?
http://omni.cmxlog.com/4.4/pollux_windy/
Do i have to flash your files again ??
Click to expand...
Click to collapse
Currently, yes, if it is your main rom. If it is a secondary rom, no.

[RECOVERY][TWRP]TWRP 2.8.6.0 Galaxy Trend Lite S7390/2

Hi everyone! I've built a recovery named TWRP for Samsung Galaxy Trend Lite S7390 or S7392! And if we have any Cyanogenmod version of CM11 and newer than it, you can flash it using this recovery thanks to being enabled of SELinux!​
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired. Please
* do some research if you have any concerns about features included in this Recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What’s new in 2.8.6.0:
TWRP 2.8.6.0 is out now for all currently supported devices.
Fix daylight savings time rules for USA and Europe (_that)
Allow mulitple overlays for popup boxes (Dees_Troy)
Add pattern style password entry for decrypt (Tassadar)
Keyboard improvements (_that)
Update AOSP base to 5.1 (Dees_Troy)
Reduce theme count to 5 and rely on scaling (Dees_Troy)
Various scaling improvements (Dees_Troy)
Improved handling of resources in the GUI (_that)
Make scroll bar size proportional to list size (_that)
Allow scoll lists to render without a header (_that)
Make console scroll per pixel with kinetic scrolling (_that)
Support styles in XML to reduce XML size and improve consistentcy (Dees_Troy)
Various other fixes and improvements (mdmower, bigbiff, codelover, etc)
CHANGELOG
2015.05.17
initial release
BUGS
No bugs
If it's you tell me!
DOWNLOAD
Thanks to:
Samsung for device
Team Win Recovery for recovery sourcecode
Thread to discuss about our devices
XDA:DevDB Information
TWRP 2.8.6.0 for the Galaxy Trend Lite, App for the Android General
Contributors
fbli_41
Source Code: http://github.com/fbli41/android_device_samsung_kylevess
Version Information
Status: Stable
Current Stable Version: 2
Stable Release Date: 2015-05-17
Created 2015-08-04
Last Updated 2017-12-04
Ones again great work !!
Really cool fam!!
Wich one to use? Because the stable one is the 2015-05-17 version right?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ca110 said:
Wich one to use? Because the stable one is the 2015-05-17 version right?
Click to expand...
Click to collapse
Both are stable but i suggested #1 2015-05-17 to flash CyanogenMod 11
twrp 2.8.6.0 release # 1
anybody checked simulation action twrp 2.8.6.0 , how it work?
i did many backups of system, but only two of them work
don't know where is error
trouble with odin?
hi, love your work, i've been using fancy lite and was so happy to see that you built cm11
I'm trying to flash twrp 2.8.6.0 via Odin3 v3.10 onto my galaxy trend lite, but when i select start, it gets stuck at <ID:0/005> recovery.img for ages. Its been half an hour since i decided to post this.
i had disabled the auto reboot and F. reset time, as various threads had sugguested.
side note, auto start set to "-" could this be the problem?
same thing happened with earlier versions of odin
thanks in advance :good:
Munya8 said:
hi, love your work, i've been using fancy lite and was so happy to see that you built cm11
I'm trying to flash twrp 2.8.6.0 via Odin3 v3.10 onto my galaxy trend lite, but when i select start, it gets stuck at <ID:0/005> recovery.img for ages. Its been half an hour since i decided to post this.
i had disabled the auto reboot and F. reset time, as various threads had sugguested.
side note, auto start set to "-" could this be the problem?
same thing happened with earlier versions of odin
thanks in advance :good:
Click to expand...
Click to collapse
via ODIN you must to flash .tar file
twrp 2.8.6.0 release # 1
backup system cm 11 BETA2 with verify md 5( before change kernel), all was ok, but when i wanted to restore system it's wrote md5 does not match...nothing can't to do... it's not first backup, also was few time...
amiro13 said:
via ODIN you must to flash .tar file
Click to expand...
Click to collapse
You mean twrp-2860_kylevess.tar?
that is what I've been using and it is not working :crying:
another side note, i opened the .tar file with 7-zip and i found a recovery.img file is that correct?
thanks again in advance
Munya8 said:
You mean twrp-2860_kylevess.tar?
that is what I've been using and it is not working :crying:
another side note, i opened the .tar file with 7-zip and i found a recovery.img file is that correct?
thanks again in advance
Click to expand...
Click to collapse
via ODIN flash CWM v6.0.1.5 .tar file
via CWM flash TWRP recovery.img
it's all
amiro13 said:
via ODIN flash CWM v6.0.1.5 .tar file
via CWM flash TWRP recovery.img
it's all
Click to expand...
Click to collapse
thanks a bunch, ill try it out tomorrow though
worked
Munya8 said:
thanks a bunch, ill try it out tomorrow though
Click to expand...
Click to collapse
Managed to flash the CWM img with rashr, then flash the twrp zip :good:
Just note the current version of rashr, 2.3.5, doesnt work at all, so use an older version if you want to use this method
thanks again
Munya8 said:
Managed to flash the CWM img with rashr, then flash the twrp zip :good:
Just note the current version of rashr, 2.3.5, doesnt work at all, so use an older version if you want to use this method
thanks again
Click to expand...
Click to collapse
With the latest one (2.3.6) of Rashr doesn't work. I use 2.3.4 and works perfectly. thanks
First flash cwm.img then twrp.zip
Ca110 said:
With the latest one (2.3.6) of Rashr doesn't work. I use 2.3.4 and works perfectly. thanks
First flash cwm.img then twrp.zip
Click to expand...
Click to collapse
well. I've tried with cmw also. download with odin was ok, but starting in restore mode always show the standard menu. have you got any tips for me?
aldolo said:
well. I've tried with cmw also. download with odin was ok, but starting in restore mode always show the standard menu. have you got any tips for me?
Click to expand...
Click to collapse
Check the f.a.q. s in my CM11 thread.
kadjarT said:
Check the f.a.q. s in my CM11 thread.
Click to expand...
Click to collapse
i've done a simple root. too scary to go deeper with the mod.
the trick is to switch off the phone after loading cwm or twrp and on again, with volumeUp/Home/Power, without the "auto reboot" option.
thank you for support.
aldolo said:
i've done a simple root. too scary to go deeper with the mod.
the trick is to switch off the phone after loading cwm or twrp and on again, with volumeUp/Home/Power, without the "auto reboot" option.
thank you for support.
Click to expand...
Click to collapse
You're welcome.
Is it necessary to unlock the bootloader if I wanna flash twrp, fancy lite and kadjar kernel? Also thank you for your work, it's hard to find something for these low-end devices.
UppGr4de said:
Is it necessary to unlock the bootloader if I wanna flash twrp, fancy lite and kadjar kernel? Also thank you for your work, it's hard to find something for these low-end devices.
Click to expand...
Click to collapse
We haven't got bootloader on our devices. So you don't need it. Kadjar kernel is only for Kitkat based roms, it won't work on stock rom.
You're welcome.

[Recovery][TWRP3][ALL] Main thread of TWRP for Xperia E1

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you. Hard. A lot
Unlocking Bootloader/Root/Recovery (Required)
Just follow steps from Sony Developer World Mobile
http://developer.sonymobile.com/unlockbootloader/unlock-yourboot-loader/
1 - Make sure you have a Recovery pre-installed (via boot partition or bootstrap hack) and Bootloader Unlocked
2 - Download the latest version
3 - Flash it via your recovery
Now you ask "i still have the CWM Philz, what to do?"
You will need a custom kernel with support to load recovery from FOTAKernel, check this
For now only one Custom Kernel support it, the FalconSS Kernel
4 - Flash FalconSSKernel or any other Kernel with this support via recovery
5 - And Enjoy!!!
TWRP3 - Support from Stock KitKat to CM14.1 Based- Zip Flashable - https://www.androidfilehost.com/?fid=457095661767133664
Support: All Xperia E1 Variants
How to get into recovery: The LEDs will flash green, in this moment you can press Volume buttons and wait, you will see a Blue/Cyan color in LEDs, you will enter iin recovery.[/B]
No issues related to TWRP3 (If you found someone, just report. Thanks!)
https://github.com/TeamVee-SS
Great work
nvt992 said:
Great work
Click to expand...
Click to collapse
Thanks
Caio99BR said:
Thanks
Click to expand...
Click to collapse
why only 2.8.1?
Sent from my Xperia T using XDA Free mobile app
SdtBarbarossa said:
why only 2.8.1?
Sent from my Xperia T using XDA Free mobile app
Click to expand...
Click to collapse
We need to get CM11 working, so TWRP of Android KK branch, after get this working we will go to CM12.1 and TWRP of Android LP Branch and by last TWRP3 of MM branch.
Understand?
The device tree?
GITHUB?
porcha18 said:
The device tree?
GITHUB?
Click to expand...
Click to collapse
Oh sorry, i will update thread.
Wtf? I can't boot into 3.x... I have 2.8 (R1) installed, the. zip doesn't work and the image file in Rasher won't work either. I have FalconSS kernel installed, (of course) TWRP 2.8 and Sony Xperia E1 Stock Lite but I cannot get this to work. Fastboot I'm also having problems with; the drivers are being a fricken pain in the ass rn... If someone could link me the offical drivers that would be awesome thanks
xeonyt12 said:
Wtf? I can't boot into 3.x... I have 2.8 (R1) installed, the. zip doesn't work and the image file in Rasher won't work either. I have FalconSS kernel installed, (of course) TWRP 2.8 and Sony Xperia E1 Stock Lite but I cannot get this to work. Fastboot I'm also having problems with; the drivers are being a fricken pain in the ass rn... If someone could link me the offical drivers that would be awesome thanks
Click to expand...
Click to collapse
In Flashtool you can find Shuang (MSM8210/MSM8610) drivers, and also Sony generic drivers that will work
Kizoky said:
In Flashtool you can find Shuang (MSM8210/MSM8610) drivers, and also Sony generic drivers that will work
Click to expand...
Click to collapse
@Kizoky For some reason, those drivers won't install... it just says 'Drivers Failed to install'; no error code or anything.... idk anymore
Wow TWRP 3.0:victory:
You're one of the best dev of this forum thank you bro :highfive:
EDIT : erm, big fail, i forgot to wipe chache/dalvik any idea to get out of this situation ? Bc now twrp 3.0 won't boot
MrGunBest said:
Wow TWRP 3.0:victory:
You're one of the best dev of this forum thank you bro :highfive:
EDIT : erm, big fail, i forgot to wipe chache/dalvik any idea to get out of this situation ? Bc now twrp 3.0 won't boot
Click to expand...
Click to collapse
I will try to fix it, sorry, i said it is in wip, the recovery works but not pass of TeamWin screen, why idk.
Caio99BR said:
I will try to fix it, sorry, i said it is in wip, the recovery works but not pass of TeamWin screen, why idk.
Click to expand...
Click to collapse
NP bro'
everybody do some fails, but i'm sure you'll make it boot:fingers-crossed:
btw guys do you have 2 recoveries ,cwm and twrp ,too?
sad2kac said:
btw guys do you have 2 recoveries ,cwm and twrp ,too?
Click to expand...
Click to collapse
Actualy, the dual recovery exploit, use the bootstrap folder into the root of the storage to boot a recovery without having a UB, then if you want a PhilZ and TWRP, you unlock your BL, flash TWRP 2.8, Caio kernel AND THEN you have dual recovery
Ok, so far I got TWRP flashed, but the problem is it shows the TWRP start logo, but doesn't boot to the UI/Options. I waited for 15 minutes and it didn't boot. Hope this can get fixed
xeonyt12 said:
Ok, so far I got TWRP flashed, but the problem is it shows the TWRP start logo, but doesn't boot to the UI/Options. I waited for 15 minutes and it didn't boot. Hope this can get fixed
Click to expand...
Click to collapse
As he said, he havn't tested the recovery
Tested on R0r2 FalconSS Kernel, TWRP 3.0 Passed on Recovery but not on UI/Option on Xperia E1 (D2005). Hope it can be fixed. Good work though.
TWRP 2.8.1.0 R2 is on!
Fixed font size
Fixed device set
Partially fixed mtp
Removed default max brightness
I think so
Not is really NEED to update, but is more good than the previous release
You still need FalconSSKernel or kernel compatible with load FOTAKernel ramdisk
Caio99BR said:
TWRP 2.8.1.0 R2 is on!
Fixed font size
Fixed device set
Partially fixed mtp
Removed default max brightness
I think so
Not is really NEED to update, but is more good than the previous release
You still need FalconSSKernel or kernel compatible with load FOTAKernel ramdisk
Click to expand...
Click to collapse
Does this include the new kernel compression stuff?

[LOCKED BOOTLOADER] Temporary TWRP3.3.1 for Samsung Galaxy S7Edge (Snapdragon) G935XX

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.​
Code:
* [B][U]Your warranty is now void.[/U][/B]
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or your getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
DOWNLOAD:
Download TWRP from here
HOW DO I ENTER RECOVERY:
- Flash ENG OREO RECOVERY via Odin in AP slot
- Reboot into recovery
If you are on android 8.0 and this is first time using this TWRP you need to install modified fstab.qcom into /system/vendor/etc if not you will fall into encryption issues
WARNING: this require data wipe otherwise skip over next step
- Windows user: Run fstab.bat
- Linux user: Run fstab.sh in terminal
- Wipe data/factory reset
To enter TWRP recovery
- Windows: Run twrp.bat
- Linux: Run twrp.sh in terminal
BUGS:
- MTP
THANKS:
@jrkruse for most stuff, guides and help
Hashcode
TWRP team
jcadduono for device tree
reserved
Wait can we flash roms now?
Leone/kyleproxx said:
Wait can we flash roms now?
Click to expand...
Click to collapse
Why not, but dont flash custom recovery/boot img we still locked
afaneh92 said:
Why not, but dont flash custom recovery/boot img we still locked
Click to expand...
Click to collapse
Um it doesn't work for my sprint s7 edge, it a on bootloader 7 btw
Edit: when I try to flash in odingbit says fuse 2 binary 1
Leone/kyleproxx said:
Um it doesn't work for my sprint s7 edge, it a on bootloader 7 btw
Edit: when I try to flash in odingbit says fuse 2 binary 1
Click to expand...
Click to collapse
Your recovery partition fused on B2 you cant flash recovery from older Rev.
afaneh92 said:
Your recovery partition fused on B2 you cant flash recovery from older Rev.
Click to expand...
Click to collapse
would you be able to fix it so i can?
Wait, what is this if the bootloader is locked?
rlewis312010 said:
Wait, what is this if the bootloader is locked?
Click to expand...
Click to collapse
I think this allows you to install roms even with the locked bootloader
Edit: if you are willing to try this try installing one of the port roms for snapdragon
Leone/kyleproxx said:
would you be able to fix it so i can?
Click to expand...
Click to collapse
If there ENG recovery with rev2 you can run it
Leone/kyleproxx said:
I think this allows you to install roms even with the locked bootloader
Edit: if you are willing to try this try installing one of the port roms for snapdragon
Click to expand...
Click to collapse
As I said before skip installing custom boot/recovery img
afaneh92 said:
If there ENG recovery with rev2 you can run it
As I said before skip installing custom boot/recovery img
Click to expand...
Click to collapse
Could I build a recovery myselft?
Flagged as Virus in Windows Defender
Windows flagged both downloads as Trojans (Win32/Spursint.F!cl) Has anyone else downloaded with this warning or did AFH get spammed?
Sagoode said:
Windows flagged both downloads as Trojans (Win32/Spursint.F!cl) Has anyone else downloaded with this warning or did AFH get spammed?
Click to expand...
Click to collapse
I was able to download but I cant install because of fuse 2 binary 1 error
i got this to work and actually flashed the norma s9+ port from hillary trump on my g935t. (after removing the kernel insall lines from the updater script) since the rom was made for the 9350 it was VERY buggy/laggy. BUT IT DID BOOT UP!!!!!:laugh::laugh::laugh::laugh:
now we just need someone to build us a rom...:good:
bigTINY779 said:
i got this to work and actually flashed the norma s9+ port from hillary trump on my g935t. (after removing the kernel insall lines from the updater script) since the rom was made for the 9350 it was VERY buggy/laggy. BUT IT DID BOOT UP!!!!!:laugh::laugh::laugh::laugh:
now we just need someone to build us a rom...:good:
Click to expand...
Click to collapse
And to make a rev 2 eng recovery file so u can install twrp
Leone/kyleproxx said:
And to make a rev 2 eng recovery file so u can install twrp
Click to expand...
Click to collapse
the one provided here worked for me
bigTINY779 said:
the one provided here worked for me
Click to expand...
Click to collapse
Read the conversations above from beginning to ed then ull understand
I'm also getting fuse 2 > binary 1 when I try to flash it.
Wish I had not installed the updates a few days ago. :/
bigTINY779 said:
i got this to work and actually flashed the norma s9+ port from hillary trump on my g935t. (after removing the kernel insall lines from the updater script) since the rom was made for the 9350 it was VERY buggy/laggy. BUT IT DID BOOT UP!!!!!:laugh::laugh::laugh::laugh:
now we just need someone to build us a rom...:good:
Click to expand...
Click to collapse
Try flashing magisk and see if we now have a new root alternative
---------- Post added at 10:18 AM ---------- Previous post was at 10:16 AM ----------
@jrkruse could you make a rev 2 ENG Oreo recovery?
Leone/kyleproxx said:
Try flashing magisk and see if we now have a new root alternative
---------- Post added at 10:18 AM ---------- Previous post was at 10:16 AM ----------
@jrkruse could you make a rev 2 ENG Oreo recovery?
Click to expand...
Click to collapse
Please stop posting things you dont know about!
We cant make stock recovery, samsung do.
Also you cant flash custom boot.img or modify it by any root method. Only boot.img or recovery.img signed by samsung can be flashed.

Development [Recovery] [13] [BETA] [venus]・ OrangeFox - UNOFFICIAL

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OrangeFox Recovery is one of the most popular custom recoveries, with amazing additional features, fixes and a host of supported devices.​- Warnings :
​ Your warranty is now void, or not... (i have no idea bruh)
・ I'm not responsible for bricked devices, thermonuclear war or alarm app fails.
・ If it's your first time or you're unexperienced with flashing ROMS, please do some search before flashing!
・ YOU are choosing to make these modifications, you're the only responsible guy for messing up if you do so.
- Informations :
- Was built on the 11th of September 2022.
- Maintained by kota. (me)
- Used Kernel : Here!
- What's broken ?
- The Status Bar can now be totally seen but doesn't totally fit.
- Vibration still doesn't work normally (there have been changes to it tho)
- Please report anything else if you do find an issue!
- Installation Guides :
- Notes :
A glitch may happen where booting it via fastboot makes touch doesn't work sometimes.
To fix that, i also provided a flashable zip via sideloading (tested on TWRP) that directly installs it.
- First way to install : (Casual way, if touch works okay | .img )
1 · Reboot into bootloader and boot OrangeFox by using this command : fastboot boot OrangeFox.img
2 · Once the Recovery boots up, go to 4th menu (3 lines), and on it, click "More".
3 · Then click More, and Flash Current OrangeFox Recovery, then swipe and reboot!
- Second way : (More tricky, but always works out fine | .zip )
1 · Reboot into Recovery Mode with TWRP installed.
2 · Prepare an ADB Session on your PC and add to it the .zip version of OrangeFox.
3 · Get into Sideload Mode and do this command on adb : adb sideload OrangeFox_Name_Example.zip
- You're now done with flashing!
- Download Links :
- OrangeFox Folder (ZIP + IMG version) : Here!
- End :
Well, here it is! Real working OrangeFox for Mi 11.
At first it was just a random idea that went threw my head two month ago.
Now it's a real thing, it was really time consuming and head scratching but it was all worth it!
Enjoy and have a nice day!
By kota.
Please note!
For the second flashing method, TWRP isn't really "required", it's more to assure that your recovery let's you sideload any unsigned packages. You should be able to flash from some recoveries such as Pixel Experience and ArrowOS recovery.
As for unsupported ones such as CherishOS, RiceDroid, etc... They'll probably throw an Error 21 when trying to sideload any unsigned packages. (in this case, Orangefox but could also be Magisk) For them, simply use TWRP.
Reserved! #2
does this allow full backup and restore of the ROM?
Sage said:
does this allow full backup and restore of the ROM?
Click to expand...
Click to collapse
The "quick backup" (whatever it is) provides a backup of data and boot partitions. I'm not totally sure that the quick backup option is related to the one on main screen tho
Hello, thanks for your work, this recovery is amazing !
Appreciate the great work!
Is this recovery working fine for A12 custom roms? (In terms of data/internal storage decryption)
bongmeiister said:
Appreciate the great work!
Is this recovery working fine for A12 custom roms? (In terms of data/internal storage decryption)
Click to expand...
Click to collapse
Yup it works, at least with Pixel Experience it works. You just have to type in your code because the partition is encrypted
Nysioko said:
Yup it works, at least with Pixel Experience it works. You just have to type in your code because the partition is encrypted
Click to expand...
Click to collapse
Great, currently I'm running Evolution X with newest TWRP and there the recovery has problems with decrypting the internal storage - no matter what I try. I think it was not made for Android 12. https://wiki.orangefox.tech/en/guides/encryption Android 12 Custom Recoveries
What code do you mean to decrypt the partition? - Thanks for your response
bongmeiister said:
Great, currently I'm running Evolution X with newest TWRP and there the recovery has problems with decrypting the internal storage - no matter what I try. I think it was not made for Android 12. https://wiki.orangefox.tech/en/guides/encryption Android 12 Custom Recoveries
What code do you mean to decrypt the partition? - Thanks for your response
Click to expand...
Click to collapse
The code to decrypt the partition is the same you had to put in to lock your phone. Say you have a pin code of 3926, just type 3926 to unlock the score from orangeFox
bongmeiister said:
Appreciate the great work!
Is this recovery working fine for A12 custom roms? (In terms of data/internal storage decryption)
Click to expand...
Click to collapse
Of course it's made for A12
First link is dead
Nysioko said:
First link is dead
Click to expand...
Click to collapse
Oops! Fixing that
kotalol said:
Oops! Fixing that
Click to expand...
Click to collapse
Thanks
Excellent, working perfectly!
(other than vibration, which is very weird indeed!)
Hoping you will continue your great work, and build for A13...
nelvinchi said:
Excellent, working perfectly!
(other than vibration, which is very weird indeed!)
Hoping you will continue your great work, and build for A13...
Click to expand...
Click to collapse
Yep, A13 is coming soon...
With A13 decryption support, fix trial to vibration, removal of flashlight button, base on latest sekaiacg TWRP and much better holepunch handle!
Does it recognize and mount USB OTG? So I can do backups to USB storage?
seemebreakthis said:
Does it recognize and mount USB OTG? So I can do backups to USB storage?
Click to expand...
Click to collapse
Not yet because of the used kernel in pre-release, the next version will probably support ExFat USB OTG.
Hi, does anyone knows that this recovery works for Xiaomi EU roms ? Thank you !
epcwong said:
Hi, does anyone knows that this recovery works for Xiaomi EU roms ? Thank you !
Click to expand...
Click to collapse
It does!

Categories

Resources