CyanogenMod 13 is a free, community built distribution of Android 6.0 (Marshmallow) which greatly extends the capabilities of your phone, tablet or PMP.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
These are CM13 builds for the Huawei P9 Lite. It may cause all the things in the disclaimer to happen, or steal your girlfriend while you are busy flashing ROMs.
GPL:
Meticulus said:
Source trees are up
kernel: https://github.com/Meticulus/android_kernel_huawei_hi6250
device: https://github.com/Meticulus/android_device_huawei_hi6250
vendor: https://github.com/Meticulus/android_vendor_huawei_hi6250
For you builders out there. there is a patch.sh file which must be run from the patches dir before building.
Also there are a few projects out side of CM that I build into my ROMs:
https://github.com/omnirom/android_packages_apps_PerformanceControl/tree/android-4.4
https://github.com/Meticulus/android_packages_apps_CodinalteParts.
Click to expand...
Click to collapse
Warning: Currently, this ROM is in BETA.
Notice: These are not "official" CyanogenMod builds.
PLEASE STAY INFORMED!
No one likes to repeat themselves over and over again.
Latest Development Activity: here
Development Blog: here
I am not your personal tech support/customer service!
Don't post in here just to get me to notice or help you!
If all you do is complain then I never help you. That's my choice.
If you are helpful and contribute to development by testing or helping out others, I am more likely to help you.
If I tell you to take your conversation out of this thread, it's because you are OFF TOPIC. So don't respond, just continue somewhere else!
If you try to tell me what to do or how I should be, then I HATE YOU! I can't help it. I HATE THAT!
If you don't read what I write then when you don't understand I laugh at you!
Download | Changelog | Install Instructions: meticulus.co.vu
Gapps [arm64 | 6.0 | you choose]: here
XDA:DevDB Information
CyanogenMod 13, ROM for the Huawei P9 Lite
Contributors
Meticulus, dady000, surdu_petru, The Marionette, XePeleato
Source Code: https://github.com/Meticulus
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Bootloader Unlocked / TWRP
Based On: CyanogenMod
Version Information
Status: Beta
Created 2016-09-20
Last Updated 2016-12-20
Working / Not working
Working
It boots
RIL (dual sim not tested)
LCD Display
Touch screen
Audio
Wifi
Bluetooth: File Transfers
Accelerometer sensor
Proximity sensor
Luminosity sensor
Magnetic Sensor
Deep Sleep
Wifi Hotspot
USB Tethering
Bluetooth Tethering
External SD Card: for "Portable storage" use
External SD Card: "Internal storage" use
Battery Usage Stats
GPS
Cameras
NFC
Not working
FM Radio
Emulated? Gyroscope sensor
Emulated? Air pressure sensor
Minor issues
Thank you @Meticulus that you have made this possible.
Now I 'm really very curious how this evolved .
AWESOME, eagerly following this thread.
Sent from my GEM-703L using XDA-Developers mobile app
Is there a basic working not working list as I haven't even rooted this phone yet.
Sent from my HUAWEI VNS-L31 using Tapatalk
Well,nothing works except for boot.
I don't suggest anyone who isn't experienced to try to flash it,it is a pain to come back to stock after you do everything to flash CM(not emotionally hard but literally hard).
that was fast...
Good! thanks for work on it!
Wow, good job !
That was fast
And the alpha build had a lift off! Way to go
THANK YOU VERY MUCH! Can't wait for it!!!
Does it have TWRP built in?
So can I flash it and then just restore my current setup? Or will I have to reinstall TWRP?
Schlengge said:
Does it have TWRP built in?
So can I flash it and then just restore my current setup? Or will I have to reinstall TWRP?
Click to expand...
Click to collapse
TWRP isn't included,and you will have a bad time trying to restore stock after doing all the things for CM.
Trust me,the build isn't anything special for now(only boots, the UI is glitchy(since we have to skip the Huawei hwcomposer like any other Hauwei phone on CM),the nav bar buttons are a bit too big and the phone won't wake up once it goes to sleep). That's all,to be honest.
The Marionette said:
TWRP isn't included,and you will have a bad time trying to restore stock after doing all the things for CM.
Trust me,the build isn't anything special for now(only boots, the UI is glitchy(since we have to skip the Huawei hwcomposer like any other Hauwei phone on CM),the nav bar buttons are a bit too big and the phone won't wake up once it goes to sleep). That's all,to be honest.
Click to expand...
Click to collapse
Ah okay thats what I expected.
No problem though. A booting ROM this fast is more than I imagined. Cool to see a build already
Meticulus said:
CyanogenMod 13 is a free, community built distribution of Android 6.0 (Marshmallow) which greatly extends the capabilities of your phone, tablet or PMP.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
These are CM13 builds for the Huawei P9 Lite. It may cause all the things in the disclaimer to happen, or steal your girlfriend while you are busy flashing ROMs.
GPL:
Code:
https://github.com/Meticulus
Warning: Currently, this ROM is EXTREMELY ALPHA.
Download meticulus.co.vu
Gapps: here
XDA:DevDB Information
CyanogenMod 13, ROM for the Huawei P9 Lite
Contributors
Meticulus
Source Code: http://github.com/Meticulus
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Bootloader Unlocked / TWRP
Based On: CyanogenMod
Version Information
Status: Testing
Created 2016-09-20
Last Updated 2016-09-20
Click to expand...
Click to collapse
Lol that was fast af... Just wondering, how much would it take to get to a semi-stable rom? Thanks for working on this device! Cheers
Acoca said:
Lol that was fast af... Just wondering, how much would it take to get to a semi-stable rom? Thanks for working on this device! Cheers
Click to expand...
Click to collapse
That depends. Huawei pretty much,politely put,urinated over the dev community by making heavy changes to Android and then refusing to give all the info to devs,making CM/AOSP impossible or extremely hard to port.
It is really hard to speculate,we have no idea what Huawei messed up on the software level. I mean,we do,but I am sure even more unpleasant surprises are on the way.
Either way great work just to get as far as a booting build. Lucky as this phone has zero dev appeal really.
Sent from my HUAWEI VNS-L31 using Tapatalk
Acoca said:
Lol that was fast af... Just wondering, how much would it take to get to a semi-stable rom? Thanks for working on this device! Cheers
Click to expand...
Click to collapse
Please do not quote the OP.
Source trees are up
kernel: https://github.com/Meticulus/android_kernel_huawei_hi6250
device: https://github.com/Meticulus/android_device_huawei_hi6250
vendor: https://github.com/Meticulus/android_vendor_huawei_hi6250
For you builders out there. there is a patch.sh file which must be run from the patches dir before building.
Also there are a few projects out side of CM that I build into my ROMs:
https://github.com/omnirom/android_packages_apps_PerformanceControl/tree/android-4.4
https://github.com/Meticulus/android_packages_apps_CodinalteParts
EDIT: I think I will have the hwcomposer fixed soon...
Omg, when this actually is gonna work We can't thank the developer enough...
Related
LineageOS is a free, community built, aftermarket firmware distribution of Android 6.0, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community.
It can be used without any need to have any Google application installed.
CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
STATUS: ALPHA
This is a preview build, do not install it if you want a stable ROM.
This is a preview of what is going down on CM14.1
Rom is in beta state so many bugs are to be expected!
All the source code is available on my Github.
I do this on my free time and unfortunately I don't have much.
Any help is a appreciated!
LINKS IN SECOND POST
Source code: https://github.com/lirokoa
CREDITS:
The whole Cyanogenmod team
Special thanks @dhiru1602 for his awesome work on exynos 4
All people who works on the Exynos 4 SOC, they desserve it
XDA:DevDB Information
LineageOS N801X/N8000, ROM for the Samsung Galaxy Note 10.1
Contributors
lirokoa
Source Code: https://github.com/lirokoa
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.0.x
Version Information
Status: Alpha
Created 2016-11-22
Last Updated 2017-08-10
How to install:
Follow the usual procedure, important things is to use supported recovery, you can download it from the download section.
Also do not forget, wipe everything, install rom, then gapps without reboot between!
Others recovery will not be supported!
Also if you come from another ROM, full wipe is required.
FAQ:
Which Gapps to use? OpenGapps works great, you can get them from here
After installing ROM + Gapss, GApps keep crashing: Just update your recovery with the provided twrp (in cm-13.0 thread)
Keyboard does not work: enable hardware keyboard in settings.
If you don't want to see cursor while using S-Pen, you can disable it it in settings / inputs
Camera is not working: use google camera
SECURITY WARNING:
SElinux is set to permissive, I'm tired of rewriting those rules...
DOWNLOAD LINKS:
-10/08/2017:
-N801X: https://forum.xda-developers.com/devdb/project/dl/?id=26049
-N8000: https://forum.xda-developers.com/devdb/project/dl/?id=26052
Changelog:
- LineageOS update
Old releases :
-05/03/2017:
-N801X: https://forum.xda-developers.com/devdb/project/dl/?id=23476
-N8000: https://forum.xda-developers.com/devdb/project/dl/?id=23482
Changelog:
- LineageOS update
-16/01/2017:
-N801X: https://forum.xda-developers.com/devdb/project/dl/?id=22630
-N8000: https://forum.xda-developers.com/devdb/project/dl/?id=22631
Changelog:
- Welcome LineageOS
- Power off charging fixed
-09/12/2016:
-N801X: http://forum.xda-developers.com/devdb/project/dl/?id=21976
-N8000:http://forum.xda-developers.com/devdb/project/dl/?id=21998
Changelog:
- Android 7.1.1
- Fixed DRM
- Attempt to fix wifi tethering
-01/09/2016:
-N801X: http://forum.xda-developers.com/devdb/project/dl/?id=21696
-N8000:http://forum.xda-developers.com/devdb/project/dl/?id=21924
downloading now. Thanks lirokoa!!
*Edit - flashing crashes at checking md5 and reboots the recovery, Using TWRP 2.8.7
Any updates here guys?
Have a GT N8000 needing some care
Will try tonight thanks
lirokoa said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0, which is designed to increase performance and reliability over stock Android for your device.
Click to expand...
Click to collapse
Hi Lirokoa, do you still use github? i dont think there is updates for your cm14.1 work. cheers.
Great ROM
I installed the ROM yesterday. It has been very stable and fast. Thanks for extending the life of my tablet again.
This should work on a GT N8000 shouldn't it ?
I am downloading now
http://forum.xda-developers.com/showthread.php?t=1910913&page=2
Excellent Work
Fast, smooth, perfect...
Thanks
Dude you are awesome. Been rocking cm since buying my note new years ago. The one device that just will not die. Thank you for not forgetting her as so many older devices often get forgotten.
Just tried to Install on my GT N8000
It doesn't work it says its not for this model Bugger I was looking forward to Nougat on my N8000
Thanks anyway
Gaz
So for so good nice job
Would there be any way to get this ROM to install on a GT N8000 ??
little_lerroyy said:
Hi Lirokoa, do you still use github? i dont think there is updates for your cm14.1 work. cheers.
Click to expand...
Click to collapse
I'll clean up a bit and push in the next few days.
lirokoa said:
I'll clean up a bit and push in the next few days.
Click to expand...
Click to collapse
Oh awesome! BTW fantastic work you have done with the n801X. Much appreciated.
If you want to install on N8000:
Unzip updater-script (META-INF/com/google/android/) and remove first string. Replace it.
Gazzasore said:
Would there be any way to get this ROM to install on a GT N8000 ??
Click to expand...
Click to collapse
If you don't need radio capabilities, you can still install n8013 version. Try this: http://forum.xda-developers.com/showpost.php?p=64397238&postcount=76. Everything is working.
kodasnl said:
If you don't need radio capabilities, you can still install n8013 version. Try this: http://forum.xda-developers.com/showpost.php?p=64397238&postcount=76. Everything is working.
Click to expand...
Click to collapse
OK any idea what prgram they used to edit the ROM is this way
Cheers
Gazzasore said:
OK any idea what prgram they used to edit the ROM is this way
Cheers
Click to expand...
Click to collapse
Open Rom with 7Zip and edit with Notepad++.
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
My first Rom built for the Huawei Y6.
Resurrection Remix is the ROM that has been based on CM,Slim,Omni and original Remix ROM builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device.
Devices Confirmed working:
SCL-L01
[All all of the Huawei Y6 2015 models should work fine]
Dowload link: https://mega.nz/#!7coTgT4I!YhbJcWLXfoGy-2r9-UrxhcTiYCH6_1UArxv6A5YR6lc
Features: Based on LineageOS 14.1 - Android 7.1.2 Nougat
Installation:
Wipe Data, Cache, Dalvik and System.
After that flash from Twrp 3.x
Known issues:
None.
If i helped press the thanks button. Also thanks Runner85sx for making this possible.
XDA:DevDB Information
Unofficial Resurrection Remix 5.8.5 , ROM for the Huawei Y6
Contributors
Thespartann, Runner85sx
Source Code: https://github.com/Runner85sx?tab=repositories
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Twrp 3.x
Based On: Lineage
Version Information
Status: Testing
Created 2018-06-01
Last Updated 2018-06-01
Hello,
is this Rom working with SCL-L21? I'm using RR 5.8.5 from Carlos. Sometimes it lags because of not enough free memory. Is this Rom better than the other version?
mime77 said:
Hello,
is this Rom working with SCL-L21? I'm using RR 5.8.5 from Carlos. Sometimes it lags because of not enough free memory. Is this Rom better than the other version?
Click to expand...
Click to collapse
Hi. Yes this work should work perfectly with SCL-L21
And yes, this ROMs works better, well I think its still eating most of the RAM. Well you may use Lineage or Slim for this to be fixed.
I didn't experience any lags until now because of the low RAM.
I will see if I may fix the RAM being eated by the OS.
Press the thanks button if I helped
I have tested the Rom 2 Days. It uses not so much RAM like the other RR version. Unfortunaly the battery usage is too high, even in flight mode.
mime77 said:
I have tested the Rom 2 Days. It uses not so much RAM like the other RR version. Unfortunaly the battery usage is too high, even in flight mode.
Click to expand...
Click to collapse
Well go with Lineage/Slim7/XenonHD then.
I know they don't have a lot of customizations, but they work well.
I am testing now LOS 14.1. If you make a new build, i can test it.
Works on SCL-L21. No bugs found yet.
Can i install it on lyf wind 7
my phone has the exact same specs as this phone has. so can i install this rom on my phone lyf wind 7.
Hi, flashing error on Y6 2017 MYA-L11 (HWMYA-L6737), how could I change the updater script in order to make it work?
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my LineageOS 16.0 for the Samsung Galaxy Note 10.1.
At first I want to thank @forkbomb444, @rINanDO, @ChronoMonochrome and all the others who are working on the exynos 4 devices, you deserve it.
I'm working nearly every day to improve our N80xx devices and here you get a already stable version.
Here you can see what's working / not working:
Spoiler: Whats working
N8000, N8010, N8013, N8020:
Boot
Audio
Bluetooth
Graphics
Cameras
Sensors
Wifi
USB
Video playback (HW/SW)
OTA Updates
RIL N8000, N8020
GPS, not sure if completely
Tethering via USB, WIFI and Bluetooth
consumerir transmitter
Spoiler: Whats not working
Main camera sometimes can't take a picture in full resolution, you could simply reopen the app and retry, or you lower the resolution.
Spoiler: Links
TWRP
N8000 Rom
N8010 / N8013 Rom
N8020 Rom
If you're having problems with decoding some videos (blurried),
this is mostly because the avc hardware decoder gets configured wrongly.
You can disable it with my magisk module:
avc_decoder_disabler.zip
If you are going to use Gapps,
I recommend to use the pico package!
https://opengapps.org/
For the others, you can use microG if you want, I've enabled signature spoofing.
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Spoiler: Changelog
29.10.2020
31.10.2020
03.11.2020
04.11.2020
09.11.2020
12.11.2020
18.11.2020
19.11.2020
20.11.2020
24.11.2020
26.11.2020
27.11.2020
07.12.2020
15.12.2020
22.01.2021
26.02.2021
02.03.2021
05.03.2021
18.03.2021
19.03.2021
21.03.2021
22.03.2021
07.04.2021
12.04.2021
13.04.2021
13.07.2021
10.08.2021
01.09.2021
02.09.2021
25.09.2021
28.09.2021
29.09.2021
30.09.2021
07.10.2021
12.12.2021
22.12.2021
09.01.2022 FINAL VERSION
15.02.2022
14.03.2022-FINAL-N8020
20.04.2022 Re-Implemented Boeffla Sound
Spoiler: Don't like my boot picture?
If you don't like it, reboot into recovery and type the following command:
adb shell (or use TWRP's terminal)
bash /data/param_restore.sh
reboot
Uploaded a prepared package to build your own boot picture
https://androidfilehost.com/?fid=7161016148664799666
Spoiler: How to improve GPS
You could use a gps.conf from https://app.box.com/s/w57s1v1n3hie7l5lk28i for your location and replace /system/etc/gps.conf.
Or you try GPS Server Optimizer app for a faster 3D fix.
For both methods you need root rights.
Spoiler: How to install it?
Instructions
Wanna improve your sound configs?
Now you can use my app to access all boeffla sound configurations.
Exynos4 Kernel Manager - Apps on Google Play
This app provides Boeffla sound control and other kernel + charging tweaks
play.google.com
XDA:DevDB Information
[ROM][9.x][N8000/N801x/N8020][STABLE] LineageOS 16.0, ROM for the Samsung Galaxy Note 10.1
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.3.0
Based On: LineageOS
Version Information
Status: Stable
Release Date: 2020-12-15
Created 2020-10-26
Last Updated 2022-04-20
Tried your n8010 rom on my n8000. I don't use it with a sim card so it's okay. Running very good so far!
Dankeschön
So.. i have N8000.
You will have a ROM for this device or i have to install any of this?
Charly_Maths said:
So.. i have N8000.
You will have a ROM for this device or i have to install any of this?
Click to expand...
Click to collapse
You will receive a n8000 version the next days.
Komodoketavaran said:
Tried your n8010 rom on my n8000. I don't use it with a sim card so it's okay. Running very good so far!
Dankeschön
Click to expand...
Click to collapse
Thx for testing and your feedback .
html6405 said:
You will receive a n8000 version the next days.
Click to expand...
Click to collapse
Thank you.
You're awesome.
html6405 said:
Thx for testing and your feedback .
Click to expand...
Click to collapse
I know that I shouldn't ask that now but do you think even Android 10 will be able on this Tablet ?
Gesendet von meinem SM-P600 mit Tapatalk
html6405 said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my first test version for the n8010 / n8013 on LineageOS 16.0.
At first I want to thank @forkbomb444, @rINanDO, @ChronoMonochrome and all the others who are working on the exynos 4 devices, you deserve it.
I'm working nearly every day to improve our N80xx devices and want to start with android 9 for now.
Dont be scared, all my android 7 roms will still receive security updates!
Here you can see how far everything is developed for now.
Whats working / not working:
Boots
Audio, main mic does not work for now
Bluetooth
Graphics
Cameras, main camera does not zoom and isnt able to take a picture for now.
Sensors, compass does not work for now.
RIL (SMS, mobile data, calls) - untested, should work on my n8000 build
Wifi
USB
Video playback (HW/SW)
OTA Updates
What is not working:
Wifi hotspot
consumerir transmitter
N8010, N8013:
TWRP 3.4.0 GT-N8010 for Odin
TWRP 3.4.0 GT-N8010 IMG
N8010 / N8013 Rom
If you are going to use Gapps,
I recommend to use the pico package!
https://opengapps.org/
For the others, you can use microG in the future if you want to (I will enable signature spoofing).
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
XDA:DevDB Information
[ROM][9.x][N8000/N801x/N8020][Testing] LineageOS 16.0, ROM for the Samsung Galaxy Note 10.1
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP 3.3.0
Based On: LineageOS
Version Information
Status: Testing
Created 2020-10-26
Last Updated 2020-10-27
Click to expand...
Click to collapse
It is recommended for daily use, multimedia, use of spen in apps like sketchbook, we hope the prompt response and port of android 11 that we hope will help our tab to be valid for 5 years
---------- Post added 28th October 2020 at 12:07 AM ---------- Previous post was 27th October 2020 at 11:59 PM ----------
sebas1080 said:
It is recommended for daily use, multimedia, use of spen in apps like sketchbook, we hope the prompt response and port of android 11 that we hope will help our tab to be valid for 5 years
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s3/development/rom-lineageos-18-0-t4179303
It would be better if you carry the android 11 directly, which is for the s3 since it would be better than the android 9 and would support more apps and the tablet would last a little longer
Guys please chill , you just had android 7 two days ago.
If I manage to fix the last major problems, then there will be an android 10 build and maybe also android 11.
I cant say if the performance will be good enough, but with android 9 its pretty good.
(android 9 should be supportet a long time for all apps etc)
If there will be some donations in future, I will buy some new SSD's to store the Android 10 and 11 source and can start developing,
at the moment there is no place left (I contribute different LineageOS versions, Slim, RR, and I wont delete anything).
But more important at the moment is to reach a level for daily use with LOS16, afterwards we could think about other android 9 roms (if we want them, like for example RR, Slim, ...)
and then, I would release an android 10 build.
hi html6405, it's just crazy that you ported android 9 to our old tablet, sothanks for that big effort!
I'm using your slimroms port right now with android 7, do you recommend me to install the lineage os 16 yet, or do you think it is not still functional for everyday use?
Hello,
Thanks a lot for your good job.
I'll wait for the N8000 version .
It would revive my old tablet.
Regards.
Ezaechiel.
Artu1 said:
hi html6405, it's just crazy that you ported android 9 to our old tablet, sothanks for that big effort!
I'm using your slimroms port right now with android 7, do you recommend me to install the lineage os 16 yet, or do you think it is not still functional for everyday use?
Click to expand...
Click to collapse
This question is not easy to answere, we just have the testing phase.
But you could make a backup of your Slim7 installation and test it by your own.
Overall it's pretty stable and doesnt run bad so far.
I've already fixed many other things, you will receive an update, maybe today or tomorrow.
ezaechiel said:
Hello,
Thanks a lot for your good job.
I'll wait for the N8000 version .
It would revive my old tablet.
Regards.
Ezaechiel.
Click to expand...
Click to collapse
You can prepare yourself to flash it today or tomorrow .
html6405 said:
Guys please chill , you just had android 7 two days ago.
If I manage to fix the last major problems, then there will be an android 10 build and maybe also android 11.
I cant say if the performance will be good enough, but with android 9 its pretty good.
(android 9 should be supportet a long time for all apps etc)
If there will be some donations in future, I will buy some new SSD's to store the Android 10 and 11 source and can start developing,
at the moment there is no place left (I contribute different LineageOS versions, Slim, RR, and I wont delete anything).
But more important at the moment is to reach a level for daily use with LOS16, afterwards we could think about other android 9 roms (if we want them, like for example RR, Slim, ...)
and then, I would release an android 10 build.
Click to expand...
Click to collapse
You are awesome!!!!
Update 29.10.2020:
Built for N8000, N8010 and N8020:
fixed all sensors,
RIL not working (n8000, n8020),
fixed OTA for all.
html6405 said:
Guys please chill , you just had android 7 two days ago.
If I manage to fix the last major problems, then there will be an android 10 build and maybe also android 11.
I cant say if the performance will be good enough, but with android 9 its pretty good.
(android 9 should be supportet a long time for all apps etc)
If there will be some donations in future, I will buy some new SSD's to store the Android 10 and 11 source and can start developing,
at the moment there is no place left (I contribute different LineageOS versions, Slim, RR, and I wont delete anything).
But more important at the moment is to reach a level for daily use with LOS16, afterwards we could think about other android 9 roms (if we want them, like for example RR, Slim, ...)
and then, I would release an android 10 build.
Click to expand...
Click to collapse
You are awesome .
html6405 said:
Update 29.10.2020:
Built for N8000, N8010 and N8020:
fixed all sensors,
RIL not working (n8000, n8020),
fixed OTA for all.
Click to expand...
Click to collapse
OMG!!!
Mouse pointer is back!!!
JEjeje.
Everything working good so far.
Doubt
Hey, if i want to flash gapps, what do I select as arm architecture? (n8000).
like if I'm not wrong n8000 is arm7, not sure if its the same as arm in the opengapps page. can somebody pls correct me and attach the gapps link too.
Thanks!
Charly_Maths said:
OMG!!!
Mouse pointer is back!!!
JEjeje.
Everything working good so far.
Click to expand...
Click to collapse
I know , mouse pointer will be removed in the next update.
(It was already on my list, but the list is long...)
PHP:
dex450 said:
Hey, if i want to flash gapps, what do I select as arm architecture? (n8000).
like if I'm not wrong n8000 is arm7, not sure if its the same as arm in the opengapps page. can somebody pls correct me and attach the gapps link too.
Thanks!
Click to expand...
Click to collapse
https://opengapps.org/
ARM->9.0->pico
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my preview build version of LineageOS 18.1 for our Samsung Galaxy Note 10.1 devices.
At first I want to thank @forkbomb444, @rINanDO, @ChronoMonochrome for all your work which helped me a lot to bring this up.
This is a early BETA build, so don't install it if you want a completley stable rom and don't report my already listet bugs!
I'm working nearly every day on our N80xx devices, because LOS18 runs much smoother than LOS17.1, I will continue here.
When you have BitGapps installed, you have to reflash them after every update!
Here you can see how far everything is working for now.
Spoiler: Whats working
N8000, N8010, N8013, N8020:
Boot
Audio
Bluetooth
Graphics
Cameras
Sensors
Wifi
GPS
USB
Video playback (HW/SW)
Tethering via USB, WIFI and Bluetooth
consumerir transmitter
Stylus with gestures and hovering icon
sec keyboard dock
RIL on N8000 (mobile connection)
much more...
Spoiler: Whats not working
Screen Cast, Chromecast did work, Samsung TV not
Main camera sometimes can't take a picture (reopen app or lower resolution)
Random reboots
N8020: RIL works 90%
Screen lightning bug, nearly eliminated
SD-Card can't be formatted as internal storage, this will cause a bootloop
Spoiler: Links
TWRP
N8000 / N8005 Rom
N8010 / N8013 Rom
N8020 Rom
Magisk zip file
Spoiler: Changelog
22.12.2020
23.12.2020
24.12.2020
11.01.2021
14.01.2021
11.03.2021
28.04.2021
29.04.2021
30.04.2021
01.07.2021
06.07.2021
15.07.2021
24.07.2021
18.08.2021
19.08.2021
23.09.2021
29.09.2021
07.10.2021
08.10.2021
26.10.2021
05.11.2021
08.11.2021
03.12.2021
14.12.2021
06.01.2022
07.01.2022
25.02.2022
15.04.2022
Spoiler: How to improve GPS
You could use a gps.conf from https://app.box.com/s/w57s1v1n3hie7l5lk28i for your location and replace /system/etc/gps.conf.
Or you try GPS Server Optimizer app for a faster 3D fix.
For both methods you need root rights.
If you are going to use Gapps,
here you can download them:
Open Gapps
For the others, you can use microG in future.
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Wanna improve your sound configs?
Now you can use my app to access all boeffla sound configurations.
Exynos4 Kernel Manager - Apps on Google Play
This app provides Boeffla sound control and other kernel + charging tweaks
play.google.com
Spoiler: How to install it?
Instructions
XDA:DevDB Information
[ROM][11.x][N8000/N801x/N8020][BETA] LineageOS 18.1, ROM for the Samsung Galaxy Note 10.1
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 11.x R
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.4.0
Based On: LineageOS
Selinux: permissive, this only makes sense as soon the ROM is stable.
Version Information
Status: Beta
Created 2020-12-21
Last Updated 2022-04-15
Wow. Thanks for this. I will test it out later but in the meantime, I don't see any Gapps for Lineage 18.1/Android 11 that is for ARM (only ARM64)...
xtoad said:
Wow. Thanks for this. I will test it out later but in the meantime, I don't see any Gapps for Lineage 18.1/Android 11 that is for ARM (only ARM64)...
Click to expand...
Click to collapse
OpenGApps - Browse /arm/test at SourceForge.net
OpenGApps daily releases
sourceforge.net
Wow, really? Thanks a lot!
Debvgger said:
Wow, really? Thanks a lot!
Click to expand...
Click to collapse
I will upload a new update today with better stability.
Update 22.12.2020:
Some Bugfixes, but still not stable.
Good Morning!
Are we going to have a rom for the N8000?
Alexfs said:
Good Morning!
Are we going to have a rom for the N8000?
Click to expand...
Click to collapse
Yes, I'm already having a version, but I'm still struggling with ril.
It crashes every 5 seconds, as soon as I have resolved this issue,
I will upload it.
I have been unable to get through setup without reboots or boot loops. (I had also the same problem with the last few Lineage 16 builds). I was ready to accept device failure (as it has all original parts from ~9 years ago). However, RR 7.1.2 is stable for me, as is the 10/28 build of L16)
It has occurred to me that was around the time you added some slight overclocking? Does this sound possible?
Again, Thank You for your quality work!
xtoad said:
I have been unable to get through setup without reboots or boot loops. (I had also the same problem with the last few Lineage 16 builds).
Click to expand...
Click to collapse
With lineageos 16? Really? This should be stable, no one reported such issues before.
This rom is early alpha, so it could be, but my devices are all booting and are still on switched since yesterday,
but there is still much work to do.
xtoad said:
It has occurred to me that was around the time you added some slight overclocking? Does this sound possible?
Click to expand...
Click to collapse
And yes, with 1600 MHz the device runs stable!
I tried full wipes and both alpha versions (and the Gapps you referenced), but I always get restarts and boot loops during setup. Incidentally, the same for the December versions of your newest Android 9.
I have the October 28 version of your Android 9 currently and it seems stable. Also your latest RR is stable for me. I will continue to try the new releases.
xtoad said:
Incidentally, the same for the December versions of your newest Android 9.
Click to expand...
Click to collapse
Strange, please could you do a last_kmsg and send it to me?
But, so far you are the only person, I will try a fresh installation.
And further problems of LOS16, please post them there .
I will upload a new Testversion today (LOS18.1).
html6405 said:
Strange, please could you do a last_kmsg and send it to me?
But, so far you are the only person, I will try a fresh installation.
And further problems of LOS16, please post them there .
I will upload a new Testversion today (LOS18.1).
Click to expand...
Click to collapse
I will continue to test. Possibly just my device. Years ago I tried playing with overclock settings and was never able to get anything stable.
html6405 said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my preview build version of LineageOS 18.1 for our Samsung Galaxy Note 10.1 devices.
At first I want to thank @forkbomb444, @rINanDO, @ChronoMonochrome for all your work which helped me a lot to bring this up.
This is a preview build, so don't install it if you want a stable rom and don't report my already listet bugs!
I'm working nearly every day on our N80xx devices, because LOS18 runs much smoother than LOS17.1,
I will continue my work there.
Uncheck to overwrite recovery when you set it up, otherwise twrp will be gone and you have to reflash it!
When you have BitGapps installed, you have to reflash them after every update!
Here you can see how far everything is working for now.
Spoiler: Whats working
N8000, N8010, N8013, N8020:
Boots
Audio
Bluetooth
Graphics
Cameras
Sensors
Wifi
USB
Video playback (HW/SW)
Tethering via USB, WIFI and Bluetooth
consumerir transmitter
Stylus with gestures and hovering icon
sec keyboard dock
Spoiler: Whats not working
Video recording with both cameras
GPS
LiveDisplay
Magisk Root
OTA Updates
Screen Cast
Random reboots
Maybe more
Links:
Spoiler: N8010, N8013
TWRP 3.4.0 GT-N8010 for Odin
TWRP 3.4.0 GT-N8010 IMG
N8010 / N8013 Rom
If you are going to use BitGapps,
here you can download them:
BiTGApps
Custom Google Apps Project
bitgapps.github.io
For the others, you can use microG in future.
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Spoiler: How to install it?
Instructions
XDA:DevDB Information
[ROM][11.x][N8000/N801x/N8020][ALPHA] LineageOS 18.1, ROM for the Samsung Galaxy Note 10.1
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 11.x R
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.4.0
Based On: LineageOS
Version Information
Status: Alpha
Created 2020-12-21
Last Updated 2020-12-21
Click to expand...
Click to collapse
Thanks a lot.
are you also working for the rom for n8020?
fastjoy77 said:
are you also working for the rom for n8020?
Click to expand...
Click to collapse
Yes, but this will take some time.
Update 23.12.2020:
Build for N8000 and fixed RIL
Further ported palm rejection
Fixed some graphic crashes
Fixed some kernel crashes
Removed dangerous recovery flash option
More small things... It was a long day
I'm really struggling these day's with AFH, all servers are very slow.
As soon as I managed this, the links will be updated.
And dont forget, if you had BitGapps installed, you must flash them afterwards,
otherwise it wont boot.
Links are up!
html6405 said:
Links are up!
Click to expand...
Click to collapse
Thanks. You are Ironman.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my version of LineageOS 18.1 for our Samsung Galaxy S3 (I9300).
At first I want to thank @rINanDO, @ChronoMonochrome for all your work.
This Rom is based on https://forum.xda-developers.com/t/rom-unofficial-11-0-0-lineageos-18-0-alpha-20-10-2020.4179303/ .
This is a early beta build, so don't install it if you want a stable rom and don't report my already listed bugs!
Here you can see how far everything is working for now.
Spoiler: Whats working
Boot
Audio
Bluetooth
Graphics
Cameras
Sensors
Wifi
GPS
USB
Video playback (HW/SW)
Tethering via USB
RIL
OTA-Updates
GSI flash
NFC
Tethering via WIFI and Bluetooth
much more...
Spoiler: Whats not working
BT headset call
Screen Cast, Chromecast did work, Samsung TV not
Random reboots
SD-Card can't be formatted as a storage expansion, your device will crash
Maybe more
Spoiler: Links
TWRP
I9300 ROM
Magisk zip file
Spoiler: Changelog
06.07.2021
15.07.2021
24.07.2021
18.08.2021
24.08.2021
21.09.2021
22.09.2021
09.11.2021
10.12.2021
05.01.2022
07.01.2022
13.01.2022
21.02.2022
20.04.2022
Spoiler: How to improve GPS
You could use a gps.conf from https://app.box.com/s/w57s1v1n3hie7l5lk28i for your location and replace /vendor/etc/gps.conf.
Or you try GPS Server Optimizer app for a faster 3D fix.
For both methods you need root rights.
If you are going to use Gapps,
here you can download them:
Open Gapps
For the others, you can use microG in future.
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Wanna improve your sound configs, control your charging current and more?
Now you can use my app to access all boeffla configurations, there will follow more functions.
Exynos4 Kernel Manager - Apps on Google Play
This app provides Boeffla sound control and other kernel + charging tweaks
play.google.com
Spoiler: How to install it?
Instructions
XDA:DevDB Information
[ROM][11.x][I9300][BETA] LineageOS 18.1, ROM for the Samsung Galaxy S3
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 11.x R
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.5.2
Based On: LineageOS
Selinux: permissive, this only makes sense as soon the ROM is stable.
Version Information
Status: Beta
Created 2021-07-05
Last Updated 2022-04-20
If you're interested in flashing your first GSI, follow this thread:
[GSI][11][ EXYNOS4 SMDK4412 ][N8000, N801X, N8020, I9300, N5100, N51XX, N7100, ...][ALPHA] [EOL]
Here you will find my exynos4 compatible GSI's. This work is based on the magic of @phhusson, so thank you very much for this. Don't forget, that you need an treblelized ROM to support this. Do you like my work? Than you can simply hit...
forum.xda-developers.com
Update 06.07.2021:
Changed menu button behavior to better support AOSP
WIFI and RIL fixes for AOSP
Now you can flash your first GSI on your Samsung Galaxy SIII.
This update will be available via AFH and OTA.
Good job guys. Keep it up. I'm glad that our S3 is still supported by the online community...
@html6405 We thank you and your amazing team for your great effort,we hope Soon you will be these Rom more stable for daily use
Best hopes for your great work on i9300
Thank you sooo much
no way to add clone randomize mac address option in this rom ?
fezozone said:
no way to add clone randomize mac address option in this rom ?
Click to expand...
Click to collapse
Did you checked the development settings?
There's the option "Wi-Fi-enhanced MAC randomization.
But I'm not sure if this is what you're looking for.
html6405 said:
Did you checked the development settings?
There's the option "Wi-Fi-enhanced MAC randomization.
But I'm not sure if this is what you're looking for.
Click to expand...
Click to collapse
yes , amazing Rom , thank you so much
keep forward..
Is the sim pin bug fixed?
Lets hope it will not stuck at Alpha state like other new roms for I9300. Just make it stable and tune ram management using LMK and Page Mergers + ZSWAP... It will then get another 5 years of use.
html6405 said:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my version of LineageOS 18.1 for our Samsung Galaxy S3 (I9300).
At first I want to thank @rINanDO, @ChronoMonochrome for all your work.
This Rom is based on https://forum.xda-developers.com/t/rom-unofficial-11-0-0-lineageos-18-0-alpha-20-10-2020.4179303/ .
This is a alpha build, so don't install it if you want a stable rom and don't report my already listed bugs!
Here you can see how far everything is working for now.
Spoiler: Whats working
Boot
Audio
Bluetooth
Graphics
Cameras
Sensors
Wifi
GPS
USB
Video playback (HW/SW)
Tethering via USB
RIL
OTA-Updates
GSI flash
much more...
Spoiler: Whats not working
Tethering via WIFI and Bluetooth
Screen Cast, Chromecast did work, Samsung TV not
Random reboots
Maybe more
Spoiler: Links
TWRP
I9300 ROM
Magisk zip file
Spoiler: How to improve GPS
You could use a gps.conf from https://app.box.com/s/w57s1v1n3hie7l5lk28i for your location and replace /system/etc/gps.conf.
Or you try GPS Server Optimizer app for a faster 3D fix.
For both methods you need root rights.
If you are going to use Gapps,
here you can download them:
Open Gapps test versions
For the others, you can use microG in future.
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
Spoiler: How to install it?
Instructions
XDA:DevDB Information
[ROM][11.x][I9300][ALPHA] LineageOS 18.1, ROM for the Samsung Galaxy S3
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 11.x R
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.5.2
Based On: LineageOS
Selinux: permissive, this only makes sense as soon the ROM is stable.
Version Information.
Status: Alpha
Created 2021-07-05
Last Updated 2021-07-06
Click to expand...
Click to collapse
Hello. Your cloud publish any link from download this Room? Thanks you! Android file host, from download?!
SILELICA said:
Hello. Your cloud publish any link from download this Room? Thanks you! Android file host, from download?!
Click to expand...
Click to collapse
Its in downloads section of op
Downloads for : Samsung Galaxy S3 | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
anyone use this rom report us please
kurtn said:
Is the sim pin bug fixed?
Click to expand...
Click to collapse
No, it still would be better to disable the pin.
(In my case it's working to unlock the device, but the risk still may be exist.)
tural619 said:
Lets hope it will not stuck at Alpha state like other new roms for I9300. Just make it stable and tune ram management using LMK and Page Mergers + ZSWAP... It will then get another 5 years of use.
Click to expand...
Click to collapse
Yes I also hope that I will be able to make it stable oneday, it's a big challenge.
Thanks for your effort. Hope to use it everyday.
Update 15.07.2021:
Included permissions for signature spoofing
Disabled wallpaper zoom ( lowered max scale for the wallpaper when it's zoomed in )
Inserted parted for repartitioning, this will be necessary for most GSI's in future (just a single process, it will persist).
Inserted a fixgsi script, with this we are able to boot up most android 11 GSI's (but most of them will not be stable without my patches).
Via OTA and AFH.
html6405 said:
Update 15.07.2021:
Included permissions for signature spoofing
Disabled wallpaper zoom ( lowered max scale for the wallpaper when it's zoomed in )
Inserted parted for repartitioning, this will be necessary for most GSI's in future (just a single process, it will persist).
Inserted a fixgsi script, with this we are able to boot up most android 11 GSI's (but most of them will not be stable without my patches).
Via OTA and AFH.
Click to expand...
Click to collapse
Great steps . keep forward , We wish to see soon this rom stable for daily use
html6405 said:
Update 15.07.2021:
Included permissions for signature spoofing
Disabled wallpaper zoom ( lowered max scale for the wallpaper when it's zoomed in )
Inserted parted for repartitioning, this will be necessary for most GSI's in future (just a single process, it will persist).
Inserted a fixgsi script, with this we are able to boot up most android 11 GSI's (but most of them will not be stable without my patches).
Via OTA and AFH.
Click to expand...
Click to collapse
What about Android 12 gsi?
kurtn said:
What about Android 12 gsi?
Click to expand...
Click to collapse
Not yet, but I know that we will be able to flash an android 12 GSI one day, there are some specific changes needed to support our exynos4...
Maybe phhusson will start soon to build, or maybe I when I have time.