Related
Just wondering, since some of the newer tablets let you hook up mini usb devices to it and so. Was wondering if there had been any adapters yet or so for us streak 7 users? Would be cool to get a wired controller hooked up and so.
You would need an OTG cable to do that, as dell doesnt make any you will have to make your own or use the HDMI dock.
Well I have the HDMI Dock, so I could use the dock then insert the usb device to that? Was thinking about getting that Logitech F710 with that usb dongle, heard it had support for android. What else would I need? Or hows that work fully.
As for the non dock part, has anyone made a cable yet to work?
if your device had a usb-a connector you have no choice then but to make a cable.
the sixaxis/ds3 uses a mini usb connector and might work though usb,
I know it and the wiimote will work over bt, with the wiimote being the easier to pair one.
Well I have the wiimote working fine, Issue there is.. Yea.. Battery drain on that remote. So figured maybe getting a adapter. I guess I need a USB to Mini micro usb? (The new style mini usb thing.. man I miss the old big RAZR size ones) How many of you have used a HID device or so on android or the streak 7?
you'd need to splice together the dock connector to preferably a USB-A female port, it'd be the most useful as you'd have a cable that could accept anything, but it'd mean you'd always need a minimum of 2 cables.
You'd also have to dissemble to dock connector itself i believe as the OTG pins are different from what's wired in the normal sync/charge cables, you cant simply cut the cable and rewire it, you'd prob have to cut the dock connector open and resolder
If you made a dock to micro usb connector it'd only accept devices that have a micro usb port on it.
Keep in mind usb mode means that the controller would be drawing power from the device itself, while controllers dont draw that much, it's still something to point out
Wouldnt this be all I need?
http://www.amazon.com/USB-Female-Mini-Male-Adapter/dp/B0016RNX2I/ref=pd_sbs_e_4
Would take the normal size usb dongle or cord, fits into the USB slot of the dock itself.
I havnt actually tried it but it sounds like that should work, i know that port is designed for otg connections so i'd assume it'd take care of the hard work.
When on 2.2.2 Did I need a special program for this to work? I know 3.x had native support. Just wondering. =) (Or can any game/emulator with key remapping auto detect)
if it's anything like the hoops needed for the s5 on 2.2.x yes, unless dell included their own code stuff to make it work, then i'm not sure.
I've never attached a controller to anything, wired or not so I can only say that much
Wonder what the app would be called or so, anyone know? I mean I ordered the part, should be here in a few days, then I can report any tests I have with a Rumblepad 2.
Ok tested it out, So far nada. Dont know if its even supposed to work.
Has anyone here hooked a wired controller up to their android? Running Honeycomb now too.
I know people talk about the F710, which I wonder if that works cause its battery powered?
So what's the verdict guys? Can a controller or other USB device be connected to the mini USB port on the docking station and work? If not, will it work if you plug in a mini USB OTG cable (like this one http://www.ebay.com/itm/Mini-USB-Re...757?pt=LH_DefaultDomain_0&hash=item3a6edf5335) into the docking station and then plug the controller into the OTG cable?
So far my verdict is nada.. dont think its supplying power to the usb ports. Now its been said that adapter based ones may work, something where controller is powered by batteries. Tho again. No one ever gives a real confirm.
My next area to branch out is http://www.onlive.com/controller 50$ but you can use a adapter for the pc. However it also works with bluetooth, something that the tablet DOES support and no adapter needed. Since I have the onlive app, least it will work 100% for THAT. Once my tax money comes in, Ill order the controller and see if it can work on emulators and so too. least then we will have 1 solid answer that has some good use. (Since honestly, onlive on the tablet really isnt bad at all!)
Why not bluetooth your ps3 controller though the sixaxis app on the market thats what I've done works great
Sent from my Dell Streak 7 using xda app-developers app
I have used my Wii remote that way
Sent from my Nexus 7 using Tapatalk 2
To answer both. If I am not mistaken. PS3 controllers have to be "paired". Which means when you wanna play PS3 or Tablet.. got to re-pair them all the time, correct?
Wii-Motes I know you dont have to re-pair them. However.. one thing I hate... that to use the classic controller.. you need to have the Wiimote laying around somewhere.. then the cable for classic. Seems bulky for normal use.
Both controllers all are battery too. Would be nice for wired solutions. If I do anything wireless, I may as well get that Onlive controller with BT support.
If you have a sixaxis/DS3 dedicated to non-ps3 use: you only have to re-pair it every time you want to use it on a different device.
The sixaxis/ds3 do work in usb mode, at least on pcs. I dont recall if there's a solution to use it in usb mode on android (though i'd imagine it should, as usb mode is trivial to enable)
If you only have a single device to use it with, you only ever need to pair it once and then you're done.
Well, I finally went and tried hooking up a usb hub to my S7, and my results were absolute failures.
I bought an OTG <-> dell 30 pin a while back and a standard OTG <-> dock cable.
I dont have a baseline as I dont know offhand which kernels are specifically tested to work.
It seems to enable the hub (by enable I mean it powers up on detection of a host, it's wall powered)
on my S5 with ICS/Phoenix kernal (which is known to support usb hosting), but nada on my S7 with ICS B4/mod and stock 514.
Can anyone explicitly confirm that the b4 and stock kernals work with host?
I'm pretty sure nothing is happening on either of those, and as it works fine on my S7 it's definitely not bad cables/hardware.
Edit: at least the S5 is even capable of powering the hub itself, and with a dock it can charge at the same time. If it wernt for the terrible HDMI out on it, it would be a full on android pc with the dock.
The S7 on the other hand: I still cant get anything, remotely powered or self powered: it gives no response
I can tell you, yes, ICS kernel does have otg drivers but may not provide power to those devices.
Sent from my Nexus 7 using Tapatalk 2
Hi,
I just received an OEM Micro USB to HDMI adapter today.
I connected my Note to the adapter and then to the HDMI cable of my TV.
Unfortunately there is no HDMI signal on the TV side.
Now, I don't know howto activate TV output on the Note. I don't even know if that's possible.
Can anyone guide me on how to activate HDMI output on the Galaxy Note ?
Should I make any settings ?
Should I play a video ? (or would it give out video from HDMI even at home screen ?)
Should I power the phone and/or the HDMI adapter through USB ?
Thanks.
mrmrmrmr said:
Hi,
I just received an OEM Micro USB to HDMI adapter today.
I connected my Note to the adapter and then to the HDMI cable of my TV.
Unfortunately there is no HDMI signal on the TV side.
Now, I don't know howto activate TV output on the Note. I don't even know if that's possible.
Can anyone guide me on how to activate HDMI output on the Galaxy Note ?
Should I make any settings ?
Should I play a video ? (or would it give out video from HDMI even at home screen ?)
Should I power the phone and/or the HDMI adapter through USB ?
Thanks.
Click to expand...
Click to collapse
Connect HDMI cable to MHL adapter, and other end into TV. (duh...)
Plug your charger cable into the MHL adapter. (output won't work without this)
Plug your MHL adapter into Note. (no configuring required!)
Everything you do on your Note will be mirrored on your TV/Screen, at the Note's native 1280x800 resolution. Plain and simple!
Video's that are played via the MHL adapter will be played at their own native resolution, up to and including 1080p.
Enjoy!
thank you.
it doesn't work unfortunately.
maybe my adapter is not working but it passes power through USB.
how can I understand if it really doesn't pass HDMI ?
mrmrmrmr said:
thank you.
it doesn't work unfortunately.
maybe my adapter is not working but it passes power through USB.
how can I understand if it really doesn't pass HDMI ?
Click to expand...
Click to collapse
It's possible that you have a faulty adapter. It should just be plug and play, but you have to make sure that the adapter is receiving external USB power in order for it to work.
ok; it works now.
the micro USB connector was not fully connected...
thanks.
Similar issue
Hi, me to facing similar issue. The MHL adapter when connected does not show any notification on the screen. The only thing it does is charging the phone. Does it mean its a faulty adapter?
i hope i am answering my own question but still if there is anything which i may be missing here
mesmerisor said:
Hi, me to facing similar issue. The MHL adapter when connected does not show any notification on the screen. The only thing it does is charging the phone. Does it mean its a faulty adapter?
i hope i am answering my own question but still if there is anything which i may be missing here
Click to expand...
Click to collapse
and what rom and kernel are you on ?
I'm on stock running ICS and I get funky results, sometimes it works for a minute or two sometimes just a few seconds. The problem seems to be on the TV, a Sony Bravia, the HDMI setting has to be Wide for picture quality (it has zoom, smart zoom, wide, 16:9 and 4:3) but as soon as there is some glitch in receiving data from the phone the TV begins to scroll through those settings to regain a signal and I can't force a setting on wide for the HDMI connector, only for one of the SCART connectors.
The frustrating part is that it works flawlessly when I connect an Asus Transformer. Could it be the MHL's USB connector? If that is the case how can I check it?
Sent from my GT-N7000 using Tapatalk 2
Just in case anyone relooks this up.
Connect everything. Then REBOOT PHONE/NOTE. The TV will then detect it auto.
Hope this helps someone !!
It didnt help me... my sony bravia 32" tv just wont show the gnote's video. the same adapter works fine on my samsung 32" tv but not on the sony. I have even upgarded the sony tv's firmware too. tried changing to "Wide Zoom" settings and other things but still no video showing, although the tv does know there is something plugged in to HDMI port 1.
Anyone else got ideas?
Samsung doesn't like sony!
sonhy said:
Anyone else got ideas?
Click to expand...
Click to collapse
lol, just don't try that any sony device to work together with another samsung device, this is a general rule for electronic trademarks.
*Frankly my friend, I lost a complete day trying my sony ericcson bt handset to work with my note, no success at all, so, I just bought a samsung one and everything gone well.
that sux, bluetooth is a standard and im sure there are no variants... they are cheap, so i will buy another one from ebay and see if it is bcos of the adpater and not the TV.
zopilote said:
lol, just don't try that any sony device to work together with another samsung device, this is a general rule for electronic trademarks.
*Frankly my friend, I lost a complete day trying my sony ericcson bt handset to work with my note, no success at all, so, I just bought a samsung one and everything gone well.
Click to expand...
Click to collapse
That is strange I have the MW-600 unit and it works fine with my Note, Despite, Galaxy Tab2 and Asus Transformer.
Sent from my GT-N7000 using Tapatalk 2
chappatti said:
Just in case anyone relooks this up.
Connect everything. Then REBOOT PHONE/NOTE. The TV will then detect it auto.
Click to expand...
Click to collapse
This did help me using a Galaxy Note and a cheap no-name MHL adapter I bought of eBay. Had it connected to the HDMI input on my Dell WFP3008 monitor.
mhl n7000 camera not starting when connected
hi sorry for posting after 4 years on this thread. is the camera or camera using apps (like skype) working for anyone when the phone is coonected and displaying through mhl to tv? because whenever i try to use camera when i am connected it is not working. on stock 4.1.2. thank you
I brought a MHL to HDMI adapter and I do not get a picture from it with my i9305 LTE
When I connect/disconnect I get a toast message to say HDMI connected/disconnected. and the phone charges.
When I connect a i9300 phone to the HDMI adapter it works OK.
Has anyone else had this problem?
Some early ones (9300) are wired differently and our 9305 will not work
Is there a specific adapter for the i9305 or have they removed the functionality
wstevew said:
Is there a specific adapter for the i9305 or have they removed the functionality
Click to expand...
Click to collapse
11-pin MHL-HDMI Adapter/Dongle
The Samsung Galaxy S III and Galaxy Note II use a connector that is similar to the original 5-pin MHL-HDMI adapter/dongle, but it uses 11-pins in order to achieve a few functional improvements over the 5-pin design.
It supports the use of USB and MHL simultaneously. (Note that the new Samsung 11-pin MHL-HDMI adapter also has a USB On-The-Go port).
Samsung’s Galaxy S III/ Note 2 can power the MHL-HDMI adapter (when used with a non-MHL-compatible-TV). Although this can theoretically also be done with the standard 5-pin micro-USB connector, the Galaxy S III's 11-pin connector is believed to be the first smartphone that supports this functionality.
http://www.mobilefun.co.uk/samsung-galaxy-s3-note-2-mhl-hdtv-adapter-epl-3fhubegstd-p35119.htm
OK so I checked and the model I have is 11 pin
EPL-3FHUBEGSTD
Which is the one you linked too.
Have you checked the USB debugging in advanced settings
I just checked mine today for the first time since I bought it from Amazon about 2 weeks ago. Cost me £9 - works fine. Although sometimes, it does lag a bit.
http://www.amazon.co.uk/gp/product/B00A2OBO6S/ref=oh_details_o01_s00_i00
I have tried with USB debugging on and off. Its usually on for dev purposes.
I spoke to Samsung who suggested I have a faulty MHL.
I have just had another thought though. I am running Nova Launcher, maybe touchwiz is required. I will give it another try tomorrow.
I was right, change back to touchwiz and the HDMI adapter works.
Thanks for the help
Do hdmi works on aosp custom rom?
no Samsung mhl is proprietary the 11 pins make it unique compared to standard mhl ports. as far as I know I have not heard of any aosp rom that has mhl enabled or working
Any luck?
Can anyone recommend a cheap mhl hdmi adapter from eBay?
Didn't know we had our own thread now.
Anyways so I've been trying to hook my active up to my monitor -- an ASUS VX238H -- and I finally got the correct MHL to HDMI adapter, but I still can't get it to work and I've tried three different HDMI cables. With this Sypder C Class cable and this Belkin cable I have the phone would detect being plugged up to the HDMI, but the monitor wouldn't recognize it, and with this off brand cable when I plug it in my monitor goes black (and it has two HDMI inputs with my computer plugged into HDMI1 and the phone plugged into HDMI2). Is there a specific cable I need or perhaps cables without a specific feature (such as Ethernet)?
This is not intended to be a sarcastic response, but did you enable "Screen Mirroring"?
dibeachdude said:
This is not intended to be a sarcastic response, but did you enable "Screen Mirroring"?
Click to expand...
Click to collapse
From what I read that was only needed for wireless connections and that HDMI connections didn't need that. Guess I'll give it a shot after work and see if that is the issue, but still I don't understand why the one cable would cause my monitor to go black despite me not having selected the HDMI2 input...
I have a cable left over from my Motorola Atrix 4G. I will give it a try tonight to see if I get any better results.
dibeachdude said:
This is not intended to be a sarcastic response, but did you enable "Screen Mirroring"?
Click to expand...
Click to collapse
Ok so I tried enabling Screen Mirroring but it told me to disconnect the HDMI cable first. Guess I'll just have to wait till I get paid again and get a different HDMI cable to try with (one without Ethernet) and see if I have better results.
I was reading an article from pcmag about screen mirroring (Google "How to Connect Your Samsung Galaxy S 4 to Your TV"). It said something about using a specific MHL to HDMI connector and then connecting a separate HDMI cable and a power cable. I'm not sure why you would need all of the extra cables, especially the power cable. I would think that the digital audio and video signals would be low enough power that it would use less power than the backlight. Maybe there is something specific about the pinout of the Samsung USB that requires that particular cable. If I get a chance to try my other cable tonight, I will post the results. Good luck.
dibeachdude said:
I was reading an article from pcmag about screen mirroring (Google "How to Connect Your Samsung Galaxy S 4 to Your TV"). It said something about using a specific MHL to HDMI connector and then connecting a separate HDMI cable and a power cable. I'm not sure why you would need all of the extra cables, especially the power cable. I would think that the digital audio and video signals would be low enough power that it would use less power than the backlight. Maybe there is something specific about the pinout of the Samsung USB that requires that particular cable. If I get a chance to try my other cable tonight, I will post the results. Good luck.
Click to expand...
Click to collapse
I had posted in the S4 QA section there are two different types of MHL-HDMI adapters.
A 5-pin variation for the older generation of phones like the S2 and the Infuse.
A 11-pin variation for the newer generation of phones like the S3 and S4.
The adapter does need some power to power it since it is an electronic device but not much. The rest of the power that's not used by the adapter is used to charge the phone.
I initially bought a 5-pin adapter because I didn't research enough before hand (it was a bit of an impulse buy) and so I didn't know there were two different types. I then bought an official Samsung MHL-HDMI 11-pin adpater which is what I've been using now.
I really think the issue is with the cables I'm trying to use so when I do get paid again I'm going to buy a HDMI cable with just the base A/V transfer and see if that works.
Please ignore what I said altogether. I assumed that I had a cable from my previous phone that would work for HDMI, but the cable that I have isn't even a USB connector. It has a completely different plug on it. I never used it on my last phone, and I didn't even remember the phone having two different plugs. Now, I am wanting to get the proper cable and try it. I have always thought that it would be cool to run XBMC on my phone.
Found this one: http://www.ebay.com/itm/Samsung-MHL-To-HDTV-Smart-Adapter-For-Samsung-Galaxy-S3-S-III-EPL-3FHUBEGSTA-/261233789076?pt=US_Cell_Phone_PDA_Cables_Adapters&hash=item3cd2bf4894
I will post my results when it comes in.
dibeachdude said:
Please ignore what I said altogether. I assumed that I had a cable from my previous phone that would work for HDMI, but the cable that I have isn't even a USB connector. The one that I have is an entirely different interface. I never used it on my last phone, and I didn't even remember the phone having two different plugs. Now, I am wanting to the proper cable and try it. I have always that the it would be cool to run XBMC on my phone.
Found this one: http://www.ebay.com/itm/Samsung-MHL-To-HDTV-Smart-Adapter-For-Samsung-Galaxy-S3-S-III-EPL-3FHUBEGSTA-/261233789076?pt=US_Cell_Phone_PDA_Cables_Adapters&hash=item3cd2bf4894
I will post my results when it comes in.
Click to expand...
Click to collapse
That's the one I have now.
My cable came in today, and it works perfectly. It is the original Samsung (EPL-3FHUBEGSTA) MHL to HDMI cable. I noticed that they raised the price on ebay by $5.00. They can still be found for around $11 or $12 though. All I did was plug mine in to the phone, the power cable, and HDMI, and then, I selected "Screen Mirroring" in settings. The problem may be with you monitor. I have seen some monitors that do not connect with certain HDMI devices. I think it has something to do with supporting 1080i vs 1080p. I've never been able to test the theory, but at work we have a large plasma TV that very few devices (almost none) will connect to. I have found a few other, usually smaller, monitors that seem to do the same thing. Good luck.
dibeachdude said:
My cable came in today, and it works perfectly. It is the original Samsung (EPL-3FHUBEGSTA) MHL to HDMI cable. I noticed that they raised the price on ebay by $5.00. They can still be found for around $11 or $12 though. All I did was plug mine in to the phone, the power cable, and HDMI, and then, I selected "Screen Mirroring" in settings. The problem may be with you monitor. I have seen some monitors that do not connect with certain HDMI devices. I think it has something to do with supporting 1080i vs 1080p. I've never been able to test the theory, but at work we have a large plasma TV that very few devices (almost none) will connect to. I have found a few other, usually smaller, monitors that seem to do the same thing. Good luck.
Click to expand...
Click to collapse
Are you using a HDMI cable with Ethernet or just an A/V HDMI cable? All the HDMI cables I have have Ethernet except maybe my 360 HDMI cable. I'm going to order this other cable online and try with that and if it doesn't work then I'm just going to assume my monitor is like what you said. Just a fyi it's supposed to support 1080p.
Ok just thought I'd provide an update. I got the Belkin A/V (no Ethernet) cable in today and it too didn't work so I'm just going to chalk it up to my monitor not supporting the MHL signal. I suppose I shouldn't be too surprised since it is a computer monitor after all.
Has anyone tried a USB-C to HDMI lead on the Nokia 8?
Does it work? And if it does which lead are you using.
sambartle said:
Has anyone tried a USB-C to HDMI lead on the Nokia 8?
Does it work? And if it does which lead are you using.
Click to expand...
Click to collapse
Did you find the answer already?
I'm wondering about that too...
Anyone? :fingers-crossed:
I used my Macbook Pro dock, it worked.
Sent from my Nokia 8!
Luhccas-X10 said:
I used my Macbook Pro dock, it worked.
Sent from my Nokia 8!
Click to expand...
Click to collapse
So glad that it is supported on this device. Many vendors are killing this feature for some reason.
It's a pain in the a** to check if a new device has it nowdays.
Thank you!! :good:
tal_sarid said:
So glad that it is supported on this device. Many vendors are killing this feature for some reason.
It's a pain in the a** to check if a new device has it nowdays.
Thank you!! :good:
Click to expand...
Click to collapse
Well, we don't all have Macbook Pro docks so does it work without that?
I bought a USB-C to HDMI cable today but I can't get it to work – are there any settings (or apps?) that I'd need to change/install to get this to work?
I just want to be able to plug my phone into a TV and play videos when I'm in hotels or away from home etc.
I'm new to both Android and the Nokia 8 so maybe I'm just missing something that's obvious?
(The most annoying thing is that it works perfectly on my old Nokia Lumia 950XL Windows Phone.)
nzmike001 said:
Well, we don't all have Macbook Pro docks so does it work without that?
I bought a USB-C to HDMI cable today but I can't get it to work – are there any settings (or apps?) that I'd need to change/install to get this to work?
I just want to be able to plug my phone into a TV and play videos when I'm in hotels or away from home etc.
I'm new to both Android and the Nokia 8 so maybe I'm just missing something that's obvious?
(The most annoying thing is that it works perfectly on my old Nokia Lumia 950XL Windows Phone.)
Click to expand...
Click to collapse
Still didn't get the phone yet...
From what I know the native support works with USB-C portable adapters with a HDMI port. Don't know about the cable ones.
I have this, https://www.amazon.com/dp/B01EZTRI42/, and it's working well with the native support of the HTC U11, still don't know about Nokia 8 though
I've contacted Nokia customer care and that's their official answer regarding this matter:
"Thank you for contacting Nokia Mobile Care!
We would like to inform you that the Nokia 8 does not support video out through the USB type C neither the HDMI. If you want to connect the phone to the TV please try to buy the chromecast to cast the device to the TV.
We hope that the above information is useful for you! If not, or if you have another question, please feel free to contact us again.
Best regards,
Nokia Mobile Care "
Are you sure that the Nokia 8 can cast its screen though a macbook pro dock to an external display through HDMI @Luhccas-X10 ?
I have a dodcool usb c hub and hdmi does not work on 8.1
I got my Nokia 8 today and tried a USB-C to HDMI cable I used on my old HTC U11 and unfortunately it does not work.
I'm very much doubting that the Nokia 8 has this ability.
Well today I tried a macbook dock and no joy, seems pretty conclusive that it doesnt work
I'm pleased to confirm that Displaylink works with Nokia 8! I used this one: https://www.amazon.co.uk/gp/product/B01B5RN9ZY/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
In theory any Displaylink hub or cable should work, note that you need to connect to the phone via a USB host cable e.g. https://www.amazon.co.uk/gp/product/B01GKS2HCE/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
This should work on most devices with a USB port, for me it works on my Kindle HD and Laptop too should its a useful thing to have anyway.
I got the info from a thread for the OnePlus 5T so more info in there:
https://forum.xda-developers.com/oneplus-5/themes/wired-tv-one-plus-5-makes-displaylink-t3667974
jamhtcman said:
I'm pleased to confirm that Displaylink works with Nokia 8! I used this one: https://www.amazon.co.uk/gp/product/B01B5RN9ZY/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
In theory any Displaylink hub or cable should work, note that you need to connect to the phone via a USB host cable e.g. https://www.amazon.co.uk/gp/product/B01GKS2HCE/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
This should work on most devices with a USB port, for me it works on my Kindle HD and Laptop too should its a useful thing to have anyway.
I got the info from a thread for the OnePlus 5T so more info in there:
https://forum.xda-developers.com/oneplus-5/themes/wired-tv-one-plus-5-makes-displaylink-t3667974
Click to expand...
Click to collapse
Well, very odd!
I tried a Displaylink-based hub myself with a Nokia 8 and it didn't work for me just like the regular adapters (which all of them, including the Displaylink one, worked with my HTC U11).
So, please elaborate about what you did. Is it a plug & play process? Did you do anything special to make it work for you?
By the way, I tried it with this Dell hub (which is Displaylink based on http://www.displaylink.com/products/find?vid_hdmi=1):
http://www.dell.com/en-us/shop/acce...note_bnrank=0&baynote_irrank=1&~ck=dellSearch
So firstly you need to have the displaylink app installed on your phone, apart from that you should just have to plug it in - the app will then prompt you to start showing your screen which you say OK to and that's it.
However... I found that the vast majority of the time it just simply doesn't work. Every time the device has a notification to say a device it connected and drawing power but very rarely will the displaylink actually work. I literally had to connect and disconnect the device around 100 times on some attempts before it works, sometimes fewer but the weird thing is once its connected and working, I can remove it and plug it back in and it will work straight away.
Its a really strange issue which I don't understand, it cant be the cable as it works consistently but only after getting it to work that first time. I'm thinking there may be a bug with the 8.1 firmware as another forum mentioned the maximum charge amp is reduced in 8.1. Another forum mentioned that on the Xperia XZ Premium display link only works with external power to the displaylink hub so perhaps its drawing to draw too much power and its just a fluke that it occasionally will work. Unfortunately I tried to connect external power to my hub and blew it so I can't test any further
I've tried the same setup on a Galaxy S7 Edge and that worked every time, no issue so it must be something strange with the device OR the adaptor used to convert the displaylink hub from USB to USB C.
LUHCCAS-X10
You fraud. I bought my Nokia 8 on the basis of your post. Because you decided to post this BS, and then made a prompt exit from this thread.
Now I am stuck with it. With this phone and with no ability to hook it up to my projector without unacceptable levels of latency through Chromecast or some such.
I even wasted money on this USB-C to HDMI cable (Thunderbolt 3 compatible), that doesn't work.
My only hope now is this DisplayLink setup. Any more news on it?
I messaged LUHCCAS and they said this is what they used: https://www.aliexpress.com/item/USB...a741666&transAbTest=ae803_4&priceBeautifyAB=0
Although they didn't specify which. None of them say they use displayport but I guess its possible, if so then perhaps they are not a fraud.
I have ordered a new displaylink hub so I will let you know if that works more consistently than the other one I tried.
Sounds good, please update the thread if you get the Hub. I want to use the Nokia with my Car Radio via HDMI (Appradio Unchained)
Displaylink adapter support
I'm happy to confirm that I managed to get the Nokia 8 connected to a TV using a DisplayLink adapter. :victory:
It's working pretty good (both image and sound) as long as the DisplayLink presenter app is installed.
From the first couple of minutes with it I didn't experience any issues that @jamhtcman mentioned and it's working very well at any time that I plug in the adapter to the phone (without an external power source).
Link to the adapter that I'm using:
- Link is broken -
Side note: You'll need to buy a separated USB 3.0 to USB-C OTG cable because the adapter in the box is too thick for most of the cases
---------- Post added at 21:43 ---------- Previous post was at 21:39 ----------
tal_sarid said:
Well, very odd!
I tried a Displaylink-based hub myself with a Nokia 8 and it didn't work for me just like the regular adapters (which all of them, including the Displaylink one, worked with my HTC U11).
So, please elaborate about what you did. Is it a plug & play process? Did you do anything special to make it work for you?
By the way, I tried it with this Dell hub (which is Displaylink based on http://www.displaylink.com/products/find?vid_hdmi=1):
http://www.dell.com/en-us/shop/acce...note_bnrank=0&baynote_irrank=1&~ck=dellSearch
Click to expand...
Click to collapse
Oh, and by the way, the hub that I've tested on my quoted post from before wasn't a DisplayLink hub after all. Hence, it didn't work.
tal_sarid said:
I'm happy to confirm that I managed to get the Nokia 8 connected to a TV using a DisplayLink adapter. :victory:
It's working pretty good (both image and sound) as long as the DisplayLink presenter app is installed.
From the first couple of minutes with it I didn't experience any issues that @jamhtcman mentioned and it's working very well at any time that I plug in the adapter to the phone (without an external power source).
Link to the adapter that I'm using:
Side note: You'll need to buy a separated USB 3.0 to USB-C OTG cable because the adapter in the box is too thick for most of the cases
---------- Post added at 21:43 ---------- Previous post was at 21:39 ----------
Oh, and by the way, the hub that I've tested on my quoted post from before wasn't a DisplayLink hub after all. Hence, it didn't work.
Click to expand...
Click to collapse
Awesome news, awesome :good:
BTW does it charge your phone while your phone is plugged in?
Also this is probably a bit of a specific question to pose; but by any chance have you checked whether the phone outputs just 2-channels of sound (stereo) through the displaylink adapter, or does it output however many are in the source material (e.g. 5.1 channels if you play a video file with a 5.1. surround sound audio track).
flamming_python said:
Awesome news, awesome :good:
BTW does it charge your phone while your phone is plugged in?
Also this is probably a bit of a specific question to pose; but by any chance have you checked whether the phone outputs just 2-channels of sound (stereo) through the displaylink adapter, or does it output however many are in the source material (e.g. 5.1 channels if you play a video file with a 5.1. surround sound audio track).
Click to expand...
Click to collapse
No option to charge the phone while casting I'm afraid.
Moreover, I can't tell about the sound cause I don't have any TV and AVR that supports 5.1 channels sound though an hdmi port.