Xiaomi Mi3 Bootloop - Mi 3 Q&A, Help & Troubleshooting

I bought a xiaomi Mi3 yesterday for an affordable price, but come with bootloop problem. I think i can fix it by myself by following guide in here since i manage to fix my Redmi Note 2 problem, but none of it works! My phone keep restarting on Mi logo when turned on and can only access fastboot mode, when charging red led light keep blinking and the phone keep restarting. I had already flash official firmware using MiFlash but it says " error, too many link ", flash using MiSuite but shows " cannot install rom ". Please help me, I really need an expert to unbrick this phone. Please.. :crying:
p/s : Sorry for my bad english..

You should probably contact your retailer and ask for a replacement.

Related

I have BRICKED my phone :(

Plzz help me...
My phone xiaomi mi3 first stuck on bootloop then i tried to flash any rom..
Bt while flashing the phone became off...and when i am turning it onn...then only notification led blinks red 3 times..CWM is also not opening ..plzz help me
plzz ..
Is there any way to flash or xiaomi has fastboot mode? ?! or how to flash through pc????????
plzz tell what should i do..
my phone is INDIAN VERSION
AmanNawaz said:
Plzz help me...
My phone xiaomi mi3 first stuck on bootloop then i tried to flash any rom..
Bt while flashing the phone became off...and when i am turning it onn...then only notification led blinks red 3 times..CWM is also not opening ..plzz help me
plzz ..
Is there any way to flash or xiaomi has fastboot mode? ?! or how to flash through pc????????
plzz tell what should i do..
my phone is INDIAN VERSION
Click to expand...
Click to collapse
dont panic ,
xiaomi has fastboot mode just restrt the phone and press power and vol down you will get into fastboot mode
before that just download the fastboot rom frm here,
http://en.miui.com/thread-14641-1-1.html
after downloading the rom ,download mi flash tool
after downloading everything just put your phone to fastboot mode
install mi flash tool on your pc/lap
just on top left ,you will find browse option
just go to the directory where you have unzipped the rom,chose the file
then connect your phone through usb cable it will get detected if not theres a button called refresh just press it and it will get detected
then just flash the rom, it will hardly take 90 secs to flash
now you have working mi3 with miui rom have fun
Sir can you help me on flashing ..on any social network site...canyou add me on fb
aman.nawaz.71
its a request ..plzzzz
Did you solve your prob? If not, PM me.
Stick on It....plzz anyone help :'(
i have already told you how to do it,why dont you simply follow the steps
Listen to zenr2 and do what he has suggested before hitting panic all over
all the best
Sent from my Nexus 5 using Tapatalk
Thanxx all gyzzzzz.....i have successfully recovered my phone
AmanNawaz said:
Thanxx all gyzzzzz.....i have successfully recovered my phone
Click to expand...
Click to collapse
well thats good now have fun,and don't brick your device again
Thanx ZenR2 ...Bro You are simply just awesome
What is the Solution?
AmanNawaz said:
Thanxx all gyzzzzz.....i have successfully recovered my phone
Click to expand...
Click to collapse
I am happy to know that you got your phone working again, but can you please tell where did you went wrong and what is the solution behind it. So that other's can know about it too.
Regards.
Ask ZenR2

[QHsusb_Dload] How to unbrick MI3 WCDMA

Hey everyone currently experiencing this semi-bricked as it still recognized on my pc, here's details situations i faced.. Running official V6 , it stuck & freeze on MI logo, i decided to power it off, ive checked the battery before that freeze was about 53%, after that the phone won't even power up no led, try to entering recovery (no luck), trying to access fastboot mode (no luck), downloading MiflashTool and reads every tutors&articles till now nothing work, i connected to pc redlight appeared for a while, i saw that installing driver (usb input installed), then i press the whole button (power+vol-up/down its installing driver (Qhsuab_dload installed) but no luck when try to flash it with miflashtool.. I really need some help to unbrick this devices, any help&suggestions would be appreciated. Thanks
I put some pictures so you guys know what am faces
Some pictures here
Hum wow, had you resized your partitions?
I should have a sugestion, but it may not please you...
Here it is : http://en.miui.com/thread-73348-1-1.html
But before trying it just wait for other replies.
Regards and good luck.
Its done at 2nd try sir, but still no luck bro..usb port recognized but won't flash it throw me to some errors, see on Q&A for logs
SH1M4BD3 said:
Its done at 2nd try sir, but still no luck bro..usb port recognized but won't flash it throw me to some errors, see on Q&A for logs
Click to expand...
Click to collapse
How about this?
How to Unbreak Xiaomi Mi 3 (soft break) - No need to open back cover -*http://en.miui.com/thread-84669-1-1.html
No luck broo fail..ok i sold..this crap
SH1M4BD3 said:
No luck broo fail..ok i sold..this crap
Click to expand...
Click to collapse
This CRAP haha had this happend to me it is a fully bricked phone u could fix it up by opening the phone and connecting some testpoints when flashing (tutorial on miui forum).
I sent it to repair as this same thing happend to me basically the "memory block" got bricked.
You know its just not make sense, i used it normally, not even yet try to root or flashing something, its fully stock, upgrading once..i used it about 2months normal use, but suddenly facing this, come on ..
Well this is what happend when I upgraded my version of MIUI through fastboot. Not sure how u got this but that is what it means as I had this too.
Latest update i always done was an ota stable one and am sure that was recovery way

Battery died after flashing a rom in recovery mode. Phone doesn't turn on.

Hey guys, I am in a big fuss here, I was flashing new MIUI MM 6.0 and it was taking to long to flash.. I was very sleepy then and I accidentally fell a sleep. The battery was at 88% when I started doing it. So I guess the flashing must have finished by the time the battery ran out.
Now I have kept it for charging for over 2 hours and it dint turn on. Then I tried going to fastboot or recovery, dint work. Then I connected it to the PC to see if the phone is on but the display is somehow dead and WALLA!!! It gets connected. BUT there is a catch, it now shows me SIX different drives out of which 2 drives I can access. I dont know whats going on! Someone please help me. I have to travel 450 km for service center.
del
same problem bro.. how is your mi3 now?
Looks like partition has messed up. Before flashing that MIUI sh*t were you on extended partition table?
http://forum.xda-developers.com/xiaomi-mi-3/general/guide-instruction-to-restore-mi4-mi3-t3279927
Please see this link, it might help...
anshude1 said:
http://forum.xda-developers.com/xiaomi-mi-3/general/guide-instruction-to-restore-mi4-mi3-t3279927
Please see this link, it might help...
Click to expand...
Click to collapse
same problem here, I flashed SMIUI it says cant mount /dev/block/platform/msm_sdcc,. I just let on that screen, and it displays installing SMIUI system. It finishes but phone died after that.
Now same problem with the OP, no power, no fastboot mode, no recovery, when connect to a pc it displays many Drive windows. Please help.
Now I managed to removed the battery still the same no power.
Help please guys.
i have a perfect solution for this problem....100%working...now u have to flash a fastboot rom using mi flash tool from PC.....u can search it on google or u wanna know exact details then u can mail [email protected]
Faced same problem (soft brick) , steps followed to fix it
Connected to PC to check if the phone is still alive or hard bricked (yep it was , i got a lot of new driver pop ups)
I went through some MIUI forum and understood that MM roms have script which changes partition size over stock partition , hence the soft brick if u flash it in extended partition
Downloaded an old fast boot room (MIUI 7 kitkat) and tried to flash it using MIflash tool , but faced another issue in WIN 10 OS.
To fix it had to install latest qualcomm drivers for MI3 and flashed the rom in Safe mode(win10).
Now you can either flash fastboot rom or recovery zip after you change the recovery.
andy96singh said:
i have a perfect solution for this problem....100%working...now u have to flash a fastboot rom using mi flash tool from PC.....u can search it on google or u wanna know exact details then u can mail [email protected]
Click to expand...
Click to collapse
This is a public forum buddy, people aren't playing hide and seek here. So if you've solution or any tips,please share it here or provide a valid link so the user can get touch with it. Yes, google is everyone's friend, but do not ask the user to send email for solution.

Please help my leeco le 2 x626 is hard bricked

hallo all you smart devs.
i flashed the stock rom with the no verity file to go back to (original rom)
after flash the phone was booting into te android i reboot again to delete the SuperSu with the unsu file.
then when i reboot again the phone was dead and only showed the red charging light and it was not blinking.
my pc no reconise the device and there is no sound or anything in the device manager.
if this was the case then i could use the sp tool but allso this is not doing nothing.
Please help me with this as my warrenty is broken because the custom rom flashing.
i am really desperate and dont know what to do.
also the device is warming up when i have it to the wall charger but noting happens
any one please help i am also trying to use the warranty but i am afraid they will reject it.
if they do i have to open it myself and see if the battery is the problem or whatt ever.
Try to unbrick ,
https://forum.xda-developers.com/android/help/gu*ide-leeco-le-s3-x626-x622-unbrick-t3705542
Full charge battery first.
I left the phone for more then 24 hours on charger but noting happend also no screen sith charging logo.
Its probaly a hardware deffect i jusy contacted the warrenty and its now on its way the get repaired.
I will let it know what the problem was.

Redmi 9(lancelot) hard brick - HELP

Hi, I recently updated to MIUI 13. At first time it started normally but, when I tried to enter recovery mode, it frozen on bootloop. I don't understand what happened. I sent my phone to service center(2-3 times because I wanted to stay at MIUI 13. But it is bootlooped). Now I have this problem. I tried to install fastboot rom(MIUI 12) with auth bypass via SP flash tool. But there is an error:
STATUS EXT RAM EXCEPTION
IS THERE ANOTHER WAYS TO UNBRICK? OR SHOULD I GIVE IT TO SERVICE CENTER? ALSO, CAN YOU TELL ME HOW MUCH DOES IT'S REAL COST?(Because in first time I payed 10 dollars. Then 5 dollars in 2nd and 3rd times).
THANK YOU
Have you solved your issue if not reply me i also hard bricked by phone(redmi 9 prime(lancelot)) but able to solve yesterday. If you want I think I can help you on this.
sairamallu said:
Have you solved your issue if not reply me i also hard bricked by phone(redmi 9 prime(lancelot)) but able to solve yesterday. If you want I think I can help you on this.
Click to expand...
Click to collapse
Thank you for answering. Yes I could solve it. First I wait till my battery dies and did auth bypass. Then when I flashed rom with spflash tool, it worked. Now I am searching for repair IMEI. Now can't enter to meta mode.
Hey my Redmi 9 prime is stuck in bootloop it not going to recovery mode or not in fastboot mode I tried all the process to fix it but it not work please help me
Shashi69 said:
Hey my Redmi 9 prime is stuck in bootloop it not going to recovery mode or not in fastboot mode I tried all the process to fix it but it not work please help me
Click to expand...
Click to collapse
Hi bro how are you? Well first step is to wait until your phone turns off. Then you need yo download ACT UNLOCK TOOL V2.O. After this, you need to install drivers via buttons above right corner of application. Then you need to hold two volume buttons and connect your phone(But before this you just need to press auth bypass button on the app). Then when sentences appeared, and it was written Auth Bypass OK, you need to press Flash button and locate to scatter file of your device in spflash tool(Your fastboot rom folder(unzipped)/images/MT6768Scatter.txt just something like that). Then choose firmware upgrade option and press download button. Wait some time and it will reboot to your system.
YOUR IMEI and DATA WILL BE ERASED!!!BE CAREFULL.

Categories

Resources