{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Rom based on asus fota ww 4.21.40.134
Add item
* remove bolt ware.
* All system up to date from PlayStore form the 22-Sep.
*add viper4android thank to @nilac
*add xperia keyboard thank to @nilica and XOSP Team.
*add init.d tweek
*add 3 minit battery @gharrington install mod
*add xposed framework 86.
To do list
1. Make it light.
2. Saperate su install there have 2 type of su install proses
Install Prosedur
1. You must have mm bootloader and unlock [check Acip procedure]
2. Dowload rom
3. Boot into TwRp recovery select rom
4. After install finish don't wipe cache this will break su. If su broke download given link at bottom op.
5. Fist reboot it will splash due to bootloader checking thire think wait for a wile after until setupwise
6. Have fun
Download link
ZEN S V1
SuperSu if needed
Mod Name
3MinitBetterySettings
Special Thank
Asus
GOOGLE
My friend at Z00A/8 Q&A DEV Group Thank All.
@Russiamen for helping me out
@nilac for the viper and xperia keyboard
@jrior001 CM team member with out them this will not be happen
And Telegram members
and not forgotten You for trying this rom
Change log
1st release.
Screen Short
Mines
Sent from my ASUS_Z00AD using XDA-Developers mobile app
Hello your rom have to bug sensors for Brazilian users
caioRJ said:
Hello your rom have to bug sensors for Brazilian users
Click to expand...
Click to collapse
I don't know give a try
Sent from my ASUS_Z00AD using XDA-Developers mobile app
Great work thanks
Remove wrong mentions, or update them in the correct way. And just an advice, a thread must be done from the computer and not from a phone....
Sent from my powerful Intel inside using Tapatalk
nilac said:
Remove wrong mentions, or update them in the correct way. And just an advice, a thread must be done from the computer and not from a phone....
Sent from my powerful Intel inside using Tapatalk
Click to expand...
Click to collapse
Ok guru im at work...? after finish my work I will update it ✌
Thanks mate...
Work flarex 3 kernel in MM 6.0.1???
Good news new opportunity is welcome, but I don't know if you are allowed to add gravitybox mm freely?
Nice work, don't know way Adaway do don't work, it can't change hosts files?
Looks like there is some problems with accessing /system folder - could you check it?
Wysłane z mojego ASUS_Z00AD przy użyciu Tapatalka
sebx_g1 said:
Good news new opportunity is welcome, but I don't know if you are allowed to add gravitybox mm freely?
Nice work, don't know way Adaway do don't work, it can't change hosts files?
Looks like there is some problems with accessing /system folder - could you check it?
Wysłane z mojego ASUS_Z00AD przy użyciu Tapatalka
Click to expand...
Click to collapse
What type of adaway did you used?
shazzl said:
What type of adaway did you used?
Click to expand...
Click to collapse
Version from XDA 3.1.2
Wysłane z mojego ASUS_Z00AD przy użyciu Tapatalka
Renix63 said:
Thanks mate...
Work flarex 3 kernel in MM 6.0.1???
Click to expand...
Click to collapse
It not working..
say99 are buzzy give us android N
Used Thanks mate...
Work flarex 3 kernel in MM 6.0.1???[/QUOTE]
Sent from my ASUS_Z00AD using [URL='https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=75858']XDA-Developers mobile app
sebx_g1 said:
Version from XDA 3.1.2
Wysłane z mojego ASUS_Z00AD przy użyciu Tapatalka
Click to expand...
Click to collapse
Read this adaway
This rom used systemless supersu
You should flash the add adaway using twrp.
Sent from my ASUS_Z00AD using XDA-Developers mobile app
I'll try, a lot of new things to know and remember last days ?. Is this also a problem systemless root if I would like to upgrade busybox? Tool which I used also don't work.
Flashing adaway give me error 255. Log attached.
http://cloud.tapatalk.com/s/57e793a3f0c92/recovery.log.zip
Actually busybox is no problem it is up to date, but AdAway is essentiall.
Edit : xposed module host enabler make AdAway working for me again!!! [emoji14]
Wysłane z mojego ASUS_Z00AD przy użyciu Tapatalka
after flash the rom zenfone 2 Z00A not only connects fiber and does not appear the asus logo, how to connect, do not enter or in recovery mode more
:crying::crying::crying:
sebx_g1 said:
I'll try, a lot of new things to know and remember last days ?. Is this also a problem systemless root if I would like to upgrade busybox? Tool which I used also don't work.
Flashing adaway give me error 255. Log attached.
http://cloud.tapatalk.com/s/57e793a3f0c92/recovery.log.zip
Actually busybox is no problem it is up to date, but AdAway is essentiall.
Edit : xposed module host enabler make AdAway working for me again!!! [emoji14]
Wysłane z mojego ASUS_Z00AD przy użyciu Tapatalka
Click to expand...
Click to collapse
I had the same problem. Turned out autostart manager was blocking super user.
Sent from my ASUS_Z00AD using XDA-Developers mobile app
how about the screen on time on this rom?
Hello,
Please don't take this rudely but your post contains lots spelling and grammar errors which took me a while to understand. I understand that English may not be your first language so I decided to fix it up for you here. Other than that, great rom!
Rom based on asus fota ww 4.21.40.134
Features:
* Removed bloatware.
* System up to date since 22 September.
* Added viper4android thanks to @nilac
* Added xperia keyboard thanks to @nilica and XOSP Team.
* Added init.d tweak
* Add 3 minit battery @gharrington. Install from zip below.
* Xposed Framework 86 included
Planned:
1. Make it lightweight.
2. Separate root install. There are 2 types of root installation methods.
Install Procedure
1. MM Bootloader must be installed and unlocked.
2. Download ROM.
3. Boot into TWRP recovery and install zip.
4. After the install has finished, don't wipe cache as this will break root. If root access is lost download and flash the zip given below.
5. Reboot may show a verification error, ignore it and android will boot up normally. Wait till setup screen appears.
6. Enjoy
Modifications
3MinitBatterySettings
Special Thanks to
ASUS
Google
My friends at Z00A/8 Q&A DEV Group, thanks to all.
@Russiamen for helping me out.
@nilac for viper4android and the xperia keyboard.
@jrior001 CyanogenMod team member. With out them, this project would not exist.
And Telegram members
And also you, for trying out this rom.
I have cm-13 with LP bootlader and unlocked. Can i flash MM bootloader??
ASUS ZENFONE 2 | 1.8 Ghz | MM 6.0.1 CM-13 Temasek
Related
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Devices Confirmed working:
SCL-AL00
SCL-CL00
SCL-L01
SCL-L02
SCL-L03
SCL-L04
SCL-L21
SCL-TL00
SCL-TL10
SCL-U03
SCL-U21
SCL-U23
SCL-U31
SCC-U21
Features:
Based on LineageOS 14.1 - Android 7.1.2 Nougat
Custom ROM developed for Qualcomm Snapdragon 210 (msm8909) processor.
First Android Nougat ROM released for Huawei Y6.
Rom Download: DOWNLOAD
Installation:
Ensure you have unlocked bootloader (there are many guides on how to check this) if you need a code go here, Emui Download Page click unlock bootloader and login with either facebook or phone account to obtain your code.
Install working TWRP recovery from: XDA DevDB
Download ROM from above link.
Download Open Gapps from http://opengapps.org/, select arm, 7.1 and then your preferred package.
Boot into TWRP, perform backup (always backup!!!), wipe data/factory reset, flash ROM zip and reboot.
First boot may take quite a while.
Update: All new builds include the LineageOS OTA feature by default.
Known issues:
Taking Panorama pictures is bugged.
Sources available on GitHub:
Device Files Part 1
Device Files Part 2
Vendor Files
Kernel Source
Credits to LineageOS, DestructoSphere and giorgio130 for making this possible.
XDA:DevDB Information
LineageOS 14.1 for Huawei Y6, ROM for the Android General
Contributors
Runner85sx, DestructoSphere, giorgio130, Carlos Arriaga
Source Code: https://github.com/Runner85sx?tab=repositories
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: Initial 2017-01-20
Stable Release Date: 2018-09-21
Created 2017-01-20
Last Updated 2018-12-08
Reserved
Ok. I've just installed the rom and tested some software and here's the results:
-Camera & Flashlight doesn't work
-Sound recorder is very quiet
-Audiofx doesn't work and it's laggy
That's all for now. ROM is very clean and fast.
Adventuresovsky said:
Ok. I've just installed the rom and tested some software and here's the results:
-Camera & Flashlight doesn't work
-Sound recorder is very quiet
-Audiofx doesn't work and it's laggy
That's all for now. ROM is very clean and fast.
Click to expand...
Click to collapse
Thanks for your feedback. Of cause we have some Bugs again. Camera & Flashlight is a main issue. Sound Recorder and AudioFX will be easy to fix.
Runner85sx said:
Thanks for your feedback. Of cause we have some Bugs again. Camera & Flashlight is a main issue. Sound Recorder and AudioFX will be easy to fix.
Click to expand...
Click to collapse
Great to see Linage 14.1 for my Y6! Thank you! Any idea why the camera isn't working on all CM builds for the Y6? Or when it will be solved?
TwingyTwingy said:
Great to see Linage 14.1 for my Y6! Thank you! Any idea why the camera isn't working on all CM builds for the Y6? Or when it will be solved?
Click to expand...
Click to collapse
We used a prebuilt boot.img for our device before. But it does not fit any more, So we created a new driver source for our camera.
It is not working any more for our device.
Runner85sx said:
We used a prebuilt boot.img for our device before. But it does not fit any more, So we created a new driver source for our camera.
It is not working any more for our device.
Click to expand...
Click to collapse
Well, real sad. It's the reason why i'm not leaving stock rom at the moment, just because the camera isn't working. But it will be fixed in the future? Or is it something that can't be fixed anymore?
TwingyTwingy said:
Well, real sad. It's the reason why i'm not leaving stock rom at the moment, just because the camera isn't working. But it will be fixed in the future? Or is it something that can't be fixed anymore?
Click to expand...
Click to collapse
This will of cause be fixed. But not tomorrow or the next days. First of all we need to rewrite almost the whole camera source with a lot of debuging.
Runner85sx said:
This will of cause be fixed. But not tomorrow or the next days. First of all we need to rewrite almost the whole camera source with a lot of debuging.
Click to expand...
Click to collapse
Great te hear! It's really great that you guys keep this device alive. Huawei needs to shame itself for that idiot EMUI bloatware.
TwingyTwingy said:
Great te hear! It's really great that you guys keep this device alive. Huawei needs to shame itself for that idiot EMUI bloatware.
Click to expand...
Click to collapse
Of cause they need to shame. And your commit is a fact for that!
@Runner85sx I've just found problem: when I try to enable Root Access from developer options there's only ADB. It's probadly something with ROM. I'll put a screenshot.
PS. I'm from Poland so it's in Polish.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wysłane z mojego msm8909 przy użyciu Tapatalka
hi thank you my friend
my phone again going to fastboot
scl u31
---------- Post added at 09:10 PM ---------- Previous post was at 08:39 PM ----------
Yes I have same problem with root access
And this can't read my SD card
---------- Post added at 09:13 PM ---------- Previous post was at 09:10 PM ----------
This ROM haven't theme choser?
Saber5311 said:
hi thank you my friend
my phone again going to fastboot
scl u31
---------- Post added at 09:10 PM ---------- Previous post was at 08:39 PM ----------
Yes I have same problem with root access
And this can't read my SD card
---------- Post added at 09:13 PM ---------- Previous post was at 09:10 PM ----------
This ROM haven't theme choser?
Click to expand...
Click to collapse
Theme chooser gone since cyanogen Inc. Now you must do some research.
Wysłane z mojego msm8909 przy użyciu Tapatalka
Great to see that Y6 is still alive!
Sent from my Huawei VNS-L21 using XDA Labs
@Runner85sx IT'S VERY IMPORTANT: YOUTUBE DOESN'T WORK! I'VE TRIED IN CHROME, IN APP, ONLY IN DEFAULT BROWSER BUT ITS KIND OF LAGGY.
Wysłane z mojego msm8909 przy użyciu Tapatalka
Hi, someone tell me how to put device in fastboot mode pls, i have unlocked bootloader, some time ago i have CM 12.1 on it but reverted to stock, now i vanna try this rom and i forgot thanks
Sent from my SM-G935F using XDA-Developers Legacy app
frumy said:
Hi, someone tell me how to put device in fastboot mode pls, i have unlocked bootloader, some time ago i have CM 12.1 on it but reverted to stock, now i vanna try this rom and i forgot thanks
Sent from my SM-G935F using XDA-Developers Legacy app
Click to expand...
Click to collapse
'ADB reboot bootloader' as I remember
Wysłane z mojego msm8909 przy użyciu Tapatalka
Adventuresovsky said:
'ADB reboot bootloader' as I remember
Wysłane z mojego msm8909 przy użyciu Tapatalka
Click to expand...
Click to collapse
So, turn off phone, conect cable and in cmd write that line? I need some special drivers ir just huawei one?
My main phone is a S7 edge and that Y6 is for play with and second phone...
Thanks
Sent from my SM-G935F using XDA-Developers Legacy app
frumy said:
So, turn off phone, conect cable and in cmd write that line? I need some special drivers ir just huawei one?
My main phone is a S7 edge and that Y6 is for play with and second phone...
Thanks
Sent from my SM-G935F using XDA-Developers Legacy app
Click to expand...
Click to collapse
You need adb drivers. The best way is to google it.
Wysłane z mojego msm8909 przy użyciu Tapatalka
Ok, thank you
Sent from my SM-G935F using XDA-Developers Legacy app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Intro:
ViPERFX is modified version of original ViPER4Android by Audio Labs which is very popular audio mod around the world of Android and probably the best audio mod ever made.
Requirements:
Android 5.0 - 8.0
Magisk v14 +
AlienoidMod test-C01 +
Modifications:
+ ViPER4Android_v2.5.0.5.apk based.
+ Material AMOLED UI.
+ More...
Downloads:
Follow the attachments...
Contributors
metaspook
Version Information
Status: Test
Test Version: C01
Release Date: 2017-09-17
Reserved
Reserved
Reserved2
Reserved2
metaspook said:
Reserved2
Click to expand...
Click to collapse
Only a question: what's the difference to module @ahrion is providing?
https://forum.xda-developers.com/showthread.php?p=71533072
vergilbt said:
Only a question: what's the difference to module @ahrion is providing?
https://forum.xda-developers.com/showthread.php?p=71533072
Click to expand...
Click to collapse
Just a dope reskin and I assume the module is written differently to work with the Alienoid framework.
Sent from my LG Nexus 5X using XDA Labs
Thanks one more time metaspook!
This module just works! And is updated. Unlike others that are outdated.
Long live for this module that is simple and efficient!??
understand the lineup.
thanks.. to you also guys for responses.... :good:
I hope you guyz starting to understand the lineup. :fingers-crossed:
Some Q/A
Q: Why its need to depend on a framework?
A:
1. To make the module size smaller.
2. Update faster.
3. Fix bug faster.
4. Less code to write.
5. . . . as more. .. .. as you explore. .. . .
Q: What is the deference?
A:
1. When you first installing AlienoidMod one of its function is cloning audio config files from your system, ....yes cloning, not only coping because it not only copy the config files from system but also their respective permissions, se-context etc. Then when u install ViPERFX module it utilize those audio config files AlienoidMod cloned before and utilize several functions from. So you can use several Audio Mods for Magisk (if based on AMF) all togather.
2. If you are a module developer you do not need to put lines of config file's codes in any audio lib file, all you have to do is use the 'amf' command line interface, which is very simple. like currently
'audmod <source dir> <target dir>'
or
'amf audmod <source dir> <target dir>'
command can clone the all necessary config files from source to target directory.
3. I'm also writing more functions for 'amf' command line interface to make it more powerful that you could use in various type of modules.
Is a deep_buffer remover needed or is it in the framework included?
Hello, i just installed both modules with twrp, both are shown in magisk as module, but i do not see vipers apk. Also in magisk viper says "module will update in next reboot" . Thanks
thetrukos said:
Hello, i just installed both modules with twrp, both are shown in magisk as module, but i do not see vipers apk. Also in magisk viper says "module will update in next reboot" . Thanks
Click to expand...
Click to collapse
I had a similar issue, try installing the alienoidmod module, rebooting and then installing the viper module.
VC-34 said:
Is a deep_buffer remover needed or is it in the framework included?
Click to expand...
Click to collapse
All necessary audio config will cloned by AlienoidMod and All V4A patching n Deep buffer removing will done by the ViPERFX module.
thetrukos said:
Hello, i just installed both modules with twrp, both are shown in magisk as module, but i do not see vipers apk. Also in magisk viper says "module will update in next reboot" . Thanks
Click to expand...
Click to collapse
Meikk99 said:
I had a similar issue, try installing the alienoidmod module, rebooting and then installing the viper module.
Click to expand...
Click to collapse
For two of you and other, I want to inform that as this is at in testing stage and builds are now testing so I don't changing the version code for new builds during this testing periods so when I updated a new test build all you have to do is follow the steps below.
1. Remove previous test version AlienoidMod, ViPERFX and other module related to them from Magisk app.
2. Reboot
3. Install AlienoidMod form Magisk app or twrp
4. Reboot
5. Install ViPERFX and or other AlienoidMod module from Magisk app or twrp but if, then you have to keep a reboot gap between them.
6. Reboot.
That means you have to install freshly after a new test build comes. Please consider this boring kinda steps while this testing period. When the release build will come you don't have to do this necessarily.
Thanks you.
Module seems cannot help MIUI 9. Viper4Android shows notice that reinstall driver. Could you please take a look at that
KaiStone said:
Module seems cannot help MIUI 9. Viper4Android shows notice that reinstall driver. Could you please take a look at that
Click to expand...
Click to collapse
Same issue here. I'm on latest global miui 8. (8.5.4.0)
If I press "yes" to install the driver, nothing happens.
KaiStone said:
Module seems cannot help MIUI 9. Viper4Android shows notice that reinstall driver. Could you please take a look at that
Click to expand...
Click to collapse
xbenjamin87x said:
Same issue here. I'm on latest global miui 8. (8.5.4.0)
If I press "yes" to install the driver, nothing happens.
Click to expand...
Click to collapse
Is there any other Viper mod working on your current rom? if, then give me the link then I'll look over where need to patch. :good:
viperfx-test-A05.zip
uploaded... ok
Don't work on xiaomi mi5 running Android 7.0 miui 9 by xiaomi.eu
Wysłane z mojego MI 5 przy użyciu Tapatalka
---------- Post added at 04:46 PM ---------- Previous post was at 04:46 PM ----------
endrju_master said:
Don't work on xiaomi mi5 running Android 7.0 miui 9 by xiaomi.eu
Wysłane z mojego MI 5 przy użyciu Tapatalka
Click to expand...
Click to collapse
Wysłane z mojego MI 5 przy użyciu Tapatalka
metaspook said:
Is there any other Viper mod working on your current rom? if, then give me the link then I'll look over where need to patch. :good:
Click to expand...
Click to collapse
Iam currently apply this trick to make V4A work on MIUI 9 and some other ROMs
KaiStone said:
In my Samsung A9 Pro (MM 6.0.1) I have to make a new startup script to make Viper4Android working under Enforcing. Hope this may help someone having the same situation.
/magisk/.core/service.d/
v4a.sh
Code:
#! /system/bin/sh
sepolicy-inject --live "allow mediaserver mediaserver_tmpfs file { read write execute }" \
"allow audioserver audioserver_tmpfs file { read write execute }"
PS: remember to CHMOD it to 755 or 777
Click to expand...
Click to collapse
KaiStone said:
Iam currently apply this trick to make V4A work on MIUI 9 and some other ROMs
In my Samsung A9 Pro (MM 6.0.1) I have to make a new startup script to make Viper4Android working under Enforcing. Hope this may help someone having the same situation.
/magisk/.core/service.d/
v4a.sh
Click to expand...
Click to collapse
Can you test it and let me know the steps below?
1. Copy "amf-services.sh" from "/magisk/amf/amf-services.sh" to "/magisk/.core/service.d/amf-services.sh"
2. Reboot
3. Check now working or not
metaspook said:
Can you test it and let me know the steps below?
1. Copy "amf-services.sh" from "/magisk/amf/amf-services.sh" to "/magisk/.core/service.d/amf-services.sh"
2. Reboot
3. Check now working or not
Click to expand...
Click to collapse
It's the same thing on RR 5.8.4. Viper4Android requires reinstall the driver.
On Samsung 6.0.1, I even cannot install your modules sucessfully. Both AlienoidMod and ViPERFX modules status shows "Module will be updated at next reboot". If I flash your modules through recovery, modules status shows "No info provided".
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today. We're mainly based on LineageOS so use custom kernels compatible with them!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features
Click for feature list (helps shorten the OP.)
Always Have a full functional Backup. Just in case!
DOWNLOAD ROM
Thanks to @Edlar for mirror download link.
GAPPS: DOWNLOAD GAPPS -> arm64-8.1
First time installing crDroid to your MIX 2S, or coming from another ROM:
***To boot it up, use miui oreo as base, it doesnt boot on pie miui versions***
** Make sure you're running a proper working Recovery (TWRP)
1) Copy crDroid zip, gapps zip to your device
2) Boot into Recovery
3) Wipe cache, system, & data (or just cache & system for a dirty flash).
a)If somehow it isn't booting, you will have to format data (cause of encryption)
4) Flash ROM
8) Flash gapps
9) Boot up
For root, AFTER you boot into the ROM, you can go back to recovery and install Magisk (whatever is most recent).
Upgrading from earlier version of crDroid:
The only difference between clean flash as above and upgrading is you just wipe system & cache, leaving data. Everything else is the same. ***Remember to always clean flash before reporting problems. Clean flashing is always the best method of ROM install.
KNOWN ISSUES
-Volte (it might be my carrier too, test it by yourself)
-Gcam is force closing(MGC_5.3.015_MI8_V1a), i will try to fix it (it might take a while, cause im new in terms of compiling roms etc.)
No other bugs encountered yet, if you have any post in thread and i will try to help.
Don't expect any support if you:
- are not running the included kernel
- have installed any mods such as Xposed!
- have modified system files
Screenshots:
Thanks to:
-
- Google
- LineageOS
- SlimRoms
- AOSPA (Paranoid Android)
- OmniRom
- NamelessROM
- Many others... (if you're feeling upset being out of the thanks list just send a PM )
Trees i used:
Device tree
Kernel
Vendor
SDM845 COMMON TREE
crDroid G+ community
NICE THX
Thanks.
It is nice to see new ROMs for our device
Greetings, thank you so much for ROM.
When the device is locked by the administrator application, fingerprint unlocking does not work. Please fix.
upd
+ Tap To Wake, not working
Can you make your kernel separately, under TWRP?
Can you give link for fastboot rom 9.6.4. ?? I cannot find it to flash with miflash before flash crdroid.
kecik18 said:
Can you give link for fastboot rom 9.6.4. ?? I cannot find it to flash with miflash before flash crdroid.
Click to expand...
Click to collapse
http://4pda.ru/pages/go/?u=http://b....0000.00_8.0_global_c3654091ff.tgz&e=73625964
---------- Post added at 08:23 PM ---------- Previous post was at 08:21 PM ----------
Magisk((((
ctsProfile: False
basicIntegrity: True
you used magisk hide config? if not try with it.
Edlar said:
http://4pda.ru/pages/go/?u=http://b....0000.00_8.0_global_c3654091ff.tgz&e=73625964
---------- Post added at 08:23 PM ---------- Previous post was at 08:21 PM ----------
Magisk((((
ctsProfile: False
basicIntegrity: True
Click to expand...
Click to collapse
Wooby said:
you used magisk hide config? if not try with it.
Click to expand...
Click to collapse
Yes, I used the 17.1, 17.2 version, ctsProfile: False
That's a module for magisk, download and follow the instructions on screen.
Edlar said:
Yes, I used the 17.1, 17.2 version, ctsProfile: False
Click to expand...
Click to collapse
Wooby said:
That's a module for magisk, download and follow the instructions on screen.
Click to expand...
Click to collapse
link? TY!
download it from magisk itself, slide from left, click download, search for magisk hide config, install, reboot, install terminal emulator , type props, choose option number 1 , then follow on screen instructions, choose the correct fingerprint
Edlar said:
link? TY!
Click to expand...
Click to collapse
Wooby said:
download it from magisk itself, slide from left, click download, search for magisk hide config, install, reboot, install terminal emulator , type props, choose option number 1 , then follow on screen instructions, choose the correct fingerprint
Click to expand...
Click to collapse
It worked, thanks.:good:
Np
Edlar said:
It worked, thanks.:good:
Click to expand...
Click to collapse
Wysłane z mojego Phh-Treble vanilla przy użyciu Tapatalka
Edlar said:
Greetings, thank you so much for ROM.
When the device is locked by the administrator application, fingerprint unlocking does not work. Please fix.
upd
+ Tap To Wake, not working
Can you make your kernel separately, under TWRP?
Click to expand...
Click to collapse
Upd
If you use a lock with root access, and not an application by the administrator, then fingerprint unlocking works fine
This might be crdroid specific issue.
Edlar said:
Upd
If you use a lock with root access, and not an application by the administrator, then fingerprint unlocking works fine
Click to expand...
Click to collapse
Wysłane z mojego Phh-Treble vanilla przy użyciu Tapatalka
BUG
when I work with the launcher, I have problems, if I launch the app / widget and then press the "home" button and re-launch it - the animation is disrupting.
A bug appears when using any launcher.
Okay, but this is probably crdroid source bug, since the trees i use are stable (i think).
Edlar said:
BUG
when I work with the launcher, I have problems, if I launch the app / widget and then press the "home" button and re-launch it - the animation is disrupting.
A bug appears when using any launcher.
Click to expand...
Click to collapse
Wysłane z mojego Phh-Treble vanilla przy użyciu Tapatalka
NEXT UPDATE will be when crDroid base updates, i might fix gcam till the update comes, also i heard dt2w works for some people and for some not, i will look into it and try to fix it as soon as possible, bc im a human too, and cant use my computer(im still in school) all the time.
PS. you can use this rom with every miui based oreo, cause I tried with pie based miui and it didnt boot.
Thanks you for your understanding.
Wysłane z mojego Phh-Treble vanilla przy użyciu Tapatalka
Wooby said:
NEXT UPDATE will be when crDroid base updates, i might fix gcam till the update comes, also i heard dt2w works for some people and for some not, i will look into it and try to fix it as soon as possible, bc im a human too, and cant use my computer(im still in school) all the time.
PS. you can use this rom with every miui based oreo, cause I tried with pie based miui and it didnt boot.
Thanks you for your understanding.
Wysłane z mojego Phh-Treble vanilla przy użyciu Tapatalka
Click to expand...
Click to collapse
Dt2w, really does not work.
Wooby said:
Okay, but this is probably crdroid source bug, since the trees i use are stable (i think).
Wysłane z mojego Phh-Treble vanilla przy użyciu Tapatalka
Click to expand...
Click to collapse
The same problem was on luisrom RR, apparently one source los
Hello i completly remaked and upgraded old do not working module for new Magisk 17++.
Warning, dont work with Magisk 19++
Version for 19++ is fixed by DessertArbiter here:
https://github.com/DessertArbiter/Volume-Steps-Plus---Magisk-Module/releases/latest
My new name for this module is Volume Steps Plus for Magisk.
With this module you can change number of volume steps fo Call or Media how you want.
Preset is 25 for media and 10 for In-Call volume steps.
You need have instaled Magisk 17.0++.
And maybe (i am not sure), if this module don't work for you, try install BusyBox module for Magisk.
Command for edit values in terminal is:
su
VoSte
Must be write like you see. Uppercase V and S.
Important: If you have already installed older version when 1.2.0 or other Steps Plus module by some else, you must remove older version i Magisk frst.
Versions changelog and news:
Last version:
Version 1.3.0-1.3.9
Module code optimalization and fixes
Support reboot from module
To select in menu you have multiple options for one function ect- 1/a/A
write Q for exit from module script
if you write wrong value for apply, you can write new again
some little changes in texts
Older versions:
Version 1.2.0 - 1.2.5
Bugs fixes
Compatibility for Magisk GitHub Module Repo
Better stability for same android versions what have problems with older versions
Version 1.1.2
fixed instructioms for use
Version 1.1.1
just few little fixes, nothing big
edit of module style
added selection: q - for Exit
Version 1.0.0
Initial release.
You can change count of steps for Medial or Call Volume.
Preset is Media 25 and In-Call 10 volume steps.
I can't download the file
Wysłane z mojego Redmi Note 5 Pro przy użyciu Tapatalka
I have this error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Wysłane z mojego Redmi Note 5 Pro przy użyciu Tapatalka
It work's. Good job!
Thanks
Wysłane z mojego MI 6 przy użyciu Tapatalka
ireneusz.irzyk said:
I can't download the file
Wysłane z mojego Redmi Note 5 Pro przy użyciu Tapatalka
Click to expand...
Click to collapse
Sorry but download working for me, i uploded file here on server.
Doesn't work on Poco F1 with MIUI 8.12.27 and Magisk 17.3
On the other side this one is working at least for media volume: https://forum.xda-developers.com/apps/magisk/module-aosp-volume-steps-increase-t3843492
Maybe you can check what is the difference
MikelFuchs said:
Doesn't work on Poco F1 with MIUI 8.12.27 and Magisk 17.3
On the other side this one is working at least for media volume: https://forum.xda-developers.com/apps/magisk/module-aosp-volume-steps-increase-t3843492
Maybe you can check what is the difference
Click to expand...
Click to collapse
Hello, its a same mechanism what me use too in module.
Maybe you must remove the version what you use and try install my.
You must reset phone after you install new module, and after you set new values, you must reset phone again.
PS: I tested it on Magisk 17.3 and module was working and on Magisk 18.0 i working too.
Command must be: VoSte - Must be uppercase V and S.
Wiloman said:
Hello, its a same mechanism what me use too in module.
Maybe you must remove the version what you use and try install my.
You must reset phone after you install new module, and after you set new values, you must reset phone again.
PS: I tested it on Magisk 17.3 and module was working and on Magisk 18.0 i working too.
Click to expand...
Click to collapse
Strange, I first installed your module, rebooted, changed the values in Terminal Emulator and rebooted again.
You should mention that su is necessary in terminal.
Nevertheless it didn't work.
Which phone and ROM are you using?
I will try again later.
MikelFuchs said:
Strange, I first installed your module, rebooted, changed the values in Terminal Emulator and rebooted again.
You should mention that su is necessary in terminal.
Nevertheless it didn't work.
Which phone and ROM are you using?
I will try again later.
Click to expand...
Click to collapse
Yes, sorry you must frst write su and after write command VoSte, sorry i forgot...
I use LineageOS 14.1 and i have Magisk 18 with active Magisk Hide and Systemless hosts data.
It works on mimix2 xiaomi eu rom v.8.12.27 magisk v.18 Thank you
Wiloman said:
Hello, its a same mechanism what me use too in module.
Maybe you must remove the version what you use and try install my.
You must reset phone after you install new module, and after you set new values, you must reset phone again.
PS: I tested it on Magisk 17.3 and module was working and on Magisk 18.0 i working too.
Command must be: VoSte - Must be uppercase V and S.
Click to expand...
Click to collapse
I tried this and the other module again, both are working for media volume, but not for ringtone volume. I guess it's a restriction for MIUI ROM.
Xiaomi.eu ROM 8.12.27 on Poco F1 with Magisk 17.3.
MikelFuchs said:
I tried this and the other module again, both are working for media volume, but not for ringtone volume. I guess it's a restriction for MIUI ROM.
Xiaomi.eu ROM 8.12.27 on Poco F1 with Magisk 17.3.
Click to expand...
Click to collapse
Sorry, my bad it is in-call volume steps, no ring volume steps.
Wiloman said:
Sorry, my bad it is in-call volume steps, no ring volume steps.
Click to expand...
Click to collapse
No problem, music volume steps is more important.
What did you change in 1.1.2?
A change log in main post would be nice.
MikelFuchs said:
No problem, music volume steps is more important.
What did you change in 1.1.2?
A change log in main post would be nice.
Click to expand...
Click to collapse
Click on button to unhide changelog, down on main post here, and changelog is in module zip Readme.txt too.
Wiloman said:
Click on button to unhide changelog, down on main post here, and changelog is in module zip Readme.txt too.
Click to expand...
Click to collapse
Thx, seems not my day today[emoji21]
With v1.1.2 I have bootloop on my phone Redmi Note 5, with previous version was ok.
Wysłane z mojego Redmi Note 5 Pro przy użyciu Tapatalka
ireneusz.irzyk said:
With v1.1.2 I have bootloop on my phone Redmi Note 5, with previous version was ok.
Wysłane z mojego Redmi Note 5 Pro przy użyciu Tapatalka
Click to expand...
Click to collapse
It is the same version, just few fixes in style and in text.
I tryed uinstall module from my phone, download here install it, but everythink is ok, i don't know what is wrong for you in module. New version works fine for me and old version worked too.
I always test it before i upload module here.
It works fine for me but when this module is active my device does not pass SaftyNet check in magisk witch is required for me to use some other apps. My device is Xiaomi mi A2 running stock android 9 pie and magisk v18.1
Sorry for dubble post,some error after i posted it,but it was posted....
slayeralive said:
It works fine for me but when this module is active my device does not pass SaftyNet check in magisk witch is required for me to use some other apps. My device is Xiaomi mi A2 running stock android 9 pie and magisk v18.1
Click to expand...
Click to collapse
Really? But i can pass safety net with this module active.
Dou you have installed safetypatch v2 magisk module? And have you installed busybox module?
Beacuse i have it and i pass.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
RevengeOS is an aftermarket firmware based on AOSP. We are dedicated to a beautiful, fast, stable and minimal customized ROM, honesty and communication with our users, and openness with our code, Hope you will enjoy.
Please feel free to look, build, and use our code at RevengeOS GitHub.
Also, we got our Telegram Group to talk about the ROM, share some love, ideas or even have fun with us
Disclaimer: While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in Telegram Group
Download ROM here for your device!
Cepheus: OSDN
What's Working
- RIL
- WIFI
- BT
- Voice (Calls)
- Audio
- Camera
etc.
BUGS:
- Kindly report if any!.
Download the ROM
- Backup partitions from any recovery (TWRP, SHRP)
- Format data, then reboot recovery
- Wipe data, internal storage, cache, dalvik
- Flash Firmware, then RevengeOS Package
- Flash gapps or any other add-on
-And at last Reboot!
[First boot will take few minutes! Have patience]
Clean Flash is always recommended!
If you want any bug to be fixed please write here on xda in detail. Give Logcats, mention your device name, mention if any mods and kernels, if used and please be specific about it. By helping us, you are helping yourself too.
->How to take Logcats?
https://goo.gl/UcTM9 and https://goo.gl/J4CSEP
XDA:DevDB Information
RevengeOS for Xiaomi Mi 9, ROM for the Xiaomi Mi 9
Contributors
Giovix92
Source Code: http://github.com/RevengeOS
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Min v11.0.9.0
Based On: AOSP-CAF
Version Information
Status: Stable
Current Stable Version: 20200723
Stable Release Date: 2020-07-23
Created 2020-07-24
Last Updated 2020-07-24
New ROM. Good job mate.
I know after the Sky Hawk Recovery, u will come again with some surprise for Mi9 and here we go.. :good:
smstiv said:
New ROM. Good job mate.
Click to expand...
Click to collapse
Thank you!
Rajeev said:
I know after the Sky Hawk Recovery, u will come again with some surprise for Mi9 and here we go.. :good:
Click to expand...
Click to collapse
Yeah, these are the 2 project I usually port to the devices I own.??
If i am on 12.01.0 i can still flash this rom or should i rollback to MIUI 11?
tomzzi said:
If i am on 12.01.0 i can still flash this rom or should i rollback to MIUI 11?
Click to expand...
Click to collapse
I come from RevOS based con Miui12 and just make what the OP say. Formar data and flash the last firm.
The ROM works very well, thanks! The only problem i notice is that anx camera doesn't work
to me the Anx camera works without problems, and the battery is very good
baggino said:
to me the Anx camera works without problems, and the battery is very good
Click to expand...
Click to collapse
Hello. Works with the 48mp ad-on? Becouse works for me until i install the ad-on. I also used the 12.0.1 firmware. Maybe this is the problem. What firmware do you use?
Thanks
rumucor said:
Hello. Works with the 48mp ad-on? Becouse works for me until i install the ad-on. I also used the 12.0.1 firmware. Maybe this is the problem. What firmware do you use?
Thanks
Click to expand...
Click to collapse
yes, it works with 48mp, I have also installed the fw 12.0.1_eea
baggino said:
to me the Anx camera works without problems, and the battery is very good
Click to expand...
Click to collapse
Wich one of ANXCAM?
rumucor said:
The ROM works very well, thanks! The only problem i notice is that anx camera doesn't work
Click to expand...
Click to collapse
No problems here running 11.0.9.0!
smstiv said:
Wich one of ANXCAM?
Click to expand...
Click to collapse
I use ANX v185 and 48MPFix v180 (v170 should be fine too). No problems. Do you install ANX with Magisk? You shouldn't do that with TWRP. Do you clean data after installing and give manually all permissions?
I'm coming from xiaomi.eu 12.0.3 and everything works properly for now. Very good, clean and fast rom. I like it [emoji846] Thank you very much @Giovix92
Wysłane z mojego MI 9 przy użyciu Tapatalka
antykat said:
I use ANX v185 and 48MPFix v180 (v170 should be fine too). No problems. Do you install ANX with Magisk? You shouldn't do that with TWRP. Do you clean data after installing and give manually all permissions?
I'm coming from xiaomi.eu 12.0.3 and everything works properly for now. Very good, clean and fast rom. I like it [emoji846] Thank you very much @Giovix92
Wysłane z mojego MI 9 przy użyciu Tapatalka
Click to expand...
Click to collapse
ok, i don't have magisk installed and i did it via TWRP. That must have been the problem. Thank you very much!
I don't understand flashing instructions.
I am on 12.0.1 EU.
Which firmware should I flash before this rom?
Could anyone provide flashing steps?
All I get is bootloop.
I followed instructions from op but not working.
tomzzi said:
I don't understand flashing instructions.
I am on 12.0.1 EU.
Which firmware should I flash before this rom?
Could anyone provide flashing steps?
All I get is bootloop.
I followed instructions from op but not working.
Click to expand...
Click to collapse
you don't need flash any firmware. Just do clean flash ROM and Gapps. At the end do format data, for me that works.
Wysłane z mojego MI 9 przy użyciu Tapatalka
---------- Post added at 07:33 AM ---------- Previous post was at 07:29 AM ----------
antykat said:
I use ANX v185 and 48MPFix v180 (v170 should be fine too). No problems. Do you install ANX with Magisk? You shouldn't do that with TWRP. Do you clean data after installing and give manually all permissions?
I'm coming from xiaomi.eu 12.0.3 and everything works properly for now. Very good, clean and fast rom. I like it [emoji846] Thank you very much @Giovix92
Wysłane z mojego MI 9 przy użyciu Tapatalka
Click to expand...
Click to collapse
Do you install ANX v185 via Magisk? I do that and as a result the camera stopped working [emoji849]
Wysłane z mojego MI 9 przy użyciu Tapatalka
At the end format data? What about before flashing rom?
Would this work?
1. boot twrp
2. wipe data, cache/dalvik
3. flash rom
4. flash gapps
5. format data-yes
6. reboot
tomzzi said:
At the end format data? What about before flashing rom?
Would this work?
1. boot twrp
2. wipe data, cache/dalvik
3. flash rom
4. flash gapps
5. format data-yes
6. reboot
Click to expand...
Click to collapse
this sequence works for me:
Format data
Reboot to recovery
Clean data (without system, firmware and vendor!)
Flash latest Magisk
Flash ROM
Flash Gapps
Format data
Reboot to system.
Wysłane z mojego MI 9 przy użyciu Tapatalka
Ok thanks. I will try.
So you have used format data with yes twice? As first and last step?
tomzzi said:
Ok thanks. I will try.
So you have used format data with yes twice? As first and last step?
Click to expand...
Click to collapse
Yep, i don't why but its works for my mi9[emoji3]
Wysłane z mojego MI 9 przy użyciu Tapatalka