Error: sorry but system interface has stopped report issue now - LeEco Le 2 Questions & Answers

hello
I am facing Error - sorry but system interface has stopped report issue now, quite frequently.
Can someone pls help in solving it?
Ofcourse have LE X526, updated to latest version + rooted & no encryption
Thanks

Related

[Q] Display corruption problem probable fix ASAP

Guys ,I have ported miui ics 2.8.10 from galaxy nexus s to galaxy mini and have got everything working but the crucial problem is the display corruption in certain menus and apps but there is no display corruption in the miuihome app or most apps .I have tried different gpu hacks including gpu render patch by editing build.prop file.I am uncertain whether its the kernel or egl related problem in the libs or something else.I will post the rom ASAP only after fixing the display corruption problem, so your help would be really appreciated. I am including some screenshots so u can analyze the problem ,I am not including the logcat as logcat doesnot show anything appreciable.The rom and its base is from THE WHISPS CM 9 unnofficial cm-9-20121110-UNOFFICIAL-tass rom .I have also tried some other miui ics or v4 roms and still the same problem persists.So if any talented developer would kindly sort this out and post a probable fix or hint then I would be grateful to them.THANK U ALL AND YOUR HELP WOULD REALLY BE APPRECIATED.:good:
Thewhisp, rohan may help
Fixed it
dheeraj (dhlalit11) said:
Thewhisp, rohan may help
Click to expand...
Click to collapse
thanks for the tip .I discovered the problem to framework related and replaced the khronos folder and fixed the flickering issue.

[Q&A] [ROM][ICS][NewBL/OldBL] SlimFastStockPluss

Q&A for [ROM][ICS][NewBL/OldBL] SlimFastStockPluss
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][ICS][NewBL/OldBL] SlimFastStockPluss. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
The application Settings (process com.android.settings) has stopped...
First a big THANK YOU!
This rom is one of the fastest I ever installed on my p990.
There is only one small issue. I get the error "the application Settings (process com.android.settings) has stopped working unexpectedly" by accessing "Home Screen" in "Settings.". Installation is on a fully wiped and re-partitioned device, also tried a new installation.
Any Advice?
Patrick
SlimFastStockPluss
Thanks a lot pal. It is running smooth and seems faster than stock ICS. I have gone through a number of KK ROMs including SlimKat project (nice, but sluggish and some features like camera not working properly); the best I tested was DayDream 1.8 OFFICIAL- nice interface and pretty quick, most features OK, but again camera app not doing the job all the time (long time to launch and also exposure problems and weird upside down picture?) and which seems to be the problem of all CM10 or higher based ROMS No BT calls working (which I use in my car when driving); GPS seemed to take a long time to get fixed, but eventually was getting there. So I keep testing and wait for new updates (maybe again 10MB lighter?) All the best for your work.
Problem with ROM Toolbox Pro
--
Problem with Kowalski Kernel
Hi first sorry for my bad english, i have a problem with kowalski kernel using this room. all works fine, until now is the best room i ever tried for my p990 but when i plug the charger when the screen is idle it freezes in black screen until i unplug the battery but when i connect it again suddenly the battery dont have charge, when this had like 80%+ im using Kernel by Civato now at 1.0 ghz is not OC, and the problem is gone, but the phone turns kinda laggy sometimes, i know im asking for too much while im a noobie here but this can be fixed? or what kernel did you recomend to use with this room, if is the stock kernel how i reflash it? already searched a lot for the stock kernell but i cant find it ):, ty for your time.
process com.android.settings
Hi,
After installed this ROM I experienced a problem where the Settings app would crash every time I press Home Screen settings. It would throw an error that said “Process com.android.settings stopped unexpectedly.
Can someone help me please?
Thank you.
P990 Doesn't start
Hello,
I've installed this ROM 10 days ago and today the phone doesn't start also whit new battery; what happen ? Help me please
--
hi
This host blocked viet nam's Ip address.
Setting kernel
Hi! I using Civiz kernel, what settings are the best on this kernel? second problem, when i set 1,5 oc i got freez and i can olny remove ant put battery.
Sorry for my bad english. ;/
Phone freezes frequently
I have installed this ROM after having different issues with CM10 and CM11 based ROMS, like GPS fix slow or no BT calls. The ROM works fast but I experience frequent freezes, usually upon incoming call that I cannot answer (screen not responding at all) or just after finishing a call. Sometimes using off switch brings restart menu on, and I can perform hot boot, most often I have to take battery out and reboot. What might be causing this? Hope there is an easy answer.
waiting for Odexed Rom!
Odexed
Few problems
Hello!
First I'd like to thanks for your ROM, it's been the most fluid and best working one that I used in last years. I was on different various CMs from CM9 to CM11 and waiting when it will be working without bugs and with good performance, but I guess I can't really expect that from unofficial CMs. So I saw this rom, tried it and was amazed how good it is.
I have few small problems though:
1) How to start File Manager with root privileges? When I start it and go to its settings, there I see option for "Access type", but it's in disabled state and thus I can't change it from default "Safe mode".
2) How can I change LED buttons brightness? Option in Kowalski Manager doesn't work at all.
3) When I use automatic timezone, it's chosen wrong and it's +1 hour against correct. I found it should solve nitz.disabled - I downloaded and installed .zip from some old tonyp's ROM, but it didn't helped. I know another solution would be to change baseband, but I'd like to stay with mine. But if it's really needed - what baseband should I flash?
Solved - see my post below.
Thanks for help,
Robyer
I also waiting from the answer on 3th question.
Tapnięte z mojego LG Optimus 2x
Solution for wrong timezone
foober said:
I also waiting from the answer on 3th question.
Click to expand...
Click to collapse
Ok, I guess proper solution is to use proper ICS baseband, as you can read in baseband thread by tonyp. So I did that.
1) Download ICS baseband
- links in tonyp thread are dead, but I found mirror: http://d-h.st/SSP (it's v30A = europe version, if you need v30B, you need to search it for yourself)
2) Install baseband by this instructions: http://forum.xda-developers.com/showpost.php?p=26191714&postcount=3
- links are dead again, so I found mirrors: SmartFlash P990 and SmartFlash drivers (in this post. Note: I have had newer version of LG drivers installed on my computer so I had to uninstall them first and install these from link and then start smartflash as administrator to make it work on my win 8.1 x64.)
3) Installed this ROM again via TWRP
- idk if it's needed, because I did it without full wipe (expected baseband flash wiped it) and my whole rom remained same.
4) Now timezone works correctly
I somehow solved my problem with LED keys brightness by installing app: "LG Touch LED Notifications" from playstore (xda doesn't allow me to post links)
Then suddenly changing it in Kowalski Manager started to work correctly. I guess it created some file which was missing in ROM. That app at start fixes some access rights, so that will be the issue. But I don't know of what file(s) exactly
---------- Post added at 05:37 PM ---------- Previous post was at 05:19 PM ----------
Another small issue in ROM - script /system/bin/gps-update has wrong url address, so updating gps_data.lto won't work. Script in /system/etc/init.d/07lto-dat is the same, but url here is correct. That gps-update script should be fixed too
Hmm, so I guess sgspluss is not reading this forum? That's pretty bad for users who can't post to dev thread (like me )...
the links do not work
geo.carlo90 said:
the links do not work
Click to expand...
Click to collapse
I reuploaded for you version V3A for new bootloader here - https://webshare.cz/file/7os6Bu2lE6/sfsp-v3a-newbl-zip
How to use SD in this ROM?
Thanks

[Q&A] [5.1] [WIP] [Experimental] [2015-03-29] CyanogenMod 12.1 for i9300

Q&A for [5.1] [WIP] [Experimental] [2015-03-29] CyanogenMod 12.1 for i9300
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [5.1] [WIP] [Experimental] [2015-03-29] CyanogenMod 12.1 for i9300. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
zip signiture verification failed
what should i do?, i cant instal this rom. i receve in recovery this messege: "zip signiture verification faild"
Setup wizard Crash 5.1 i9300
Guys can u please help me when I am setting up my phone on 5.1 expermental I can't get past the Cyanogenmod accounts because it says "Setup wizard has unfortunately stopped" then it crashes can you guys pls tell me a way around this, BTW I have tried to install the ROM and gapps seperatly but that does not work
I had the same when I flashed the gapps right after flashing the ROM.
I restored my backup of my previous ROM and flashed this ROM again, but now without gapps. It now started normally and after getting through the setup wizard I flashed gapps..
Sent from my GT-I9300 using XDA Free mobile app
When I complete the installation, it keep showing "Unfortunately, Setup Wizard has stopped.", and take me back to the first step of the installation, any clues? Or did I do something wrong?
cm12.1 is it the same build as the first dated 24-3-15.
Thanks for the rom! Does anyone have a problem with NFC turning on by itself?
My NFC chip is busted and when it's on it drains the battery. I turn it off but then it turns on again. Any ideas?
Sent from my GT-I9300 using XDA Free mobile app
What about GPS, is it working?
Hi guys!!!Why when I install the PA gapps stock occurs bootloop?My steps:full wipe,flash ROM,flash gapps,flash supersu,wipe cache e dalvik,reboot... Bootloop...[emoji17]
Not work ((
thanks for the room bro!
you are doing a excellent job!!
ustArchi, Moster2, arter97
thank you for keeping the galaxy s3 updated!!!
My Thoughts about 5.1
I have been using CM 12.1 for some good couple of days now and I would like to mention what I have noticed from problems so far:
-Nav-bar buttons are huge, which need to be resized to normal size.
-Package Installer FCs after installing apps from external sources.
-Wifi hotspot is NOT even in the settings.
-There are multiple FCs after the following:
*Going into the Lollipop easter egg that is based on the CM character.
*Changing the shortcut toggles in the navigation drawer.
Plus there's a HUGE System UI crash after setting a secured locksreen such as with PINs or Patterns, causing the phone to be unusable until it's wiped and flashed again.
I hope these FCs get fixed Asap
Music Player for CM12
Hi, if anyone is interested, I tried this music player (includes widgets) and works perfectly!
http://forum.xda-developers.com/showpost.php?p=58254288&postcount=45
PD: Thanks to reversegear
ettore88 said:
Hi guys!!!Why when I install the PA gapps stock occurs bootloop?My steps:full wipe,flash ROM,flash gapps,flash supersu,wipe cache e dalvik,reboot... Bootloop...[emoji17]
Click to expand...
Click to collapse
Actually 5.0 gaps aren't compatible with cm 12.1 , so you have to flash 5.1 gapps (I could find just the minimal package)
Bonjour,
Une mise à jour est elle prévue bientôt ?
Merci
Does this ROM work with any boeffla kernel? Thanks friends
is it just me or the notification in the lock screen cant be enlarged?
trying to solve the problem with packageinstaller and descklock but I can't replace them because I don't have root access. I can't find it in developer options. Where can I enable root?
losing call sound
Does anybody else lose the sound of a call after reboot?
12.1 crashes after 30 minutes playing music with bluetooth headset
Hi,
as already mentioned in this thread, my s3 with 12.1 crashes each time after playing 20 - 30 seconds with bluetooth headset.
Tried various headsets.
Problem does not occur when you listen to the music with wired headphones or without headphones at all.
Problem also does not occur when you receive or do a phone call over bluetooth headset.
Only happens with music and bluetooth headphones.
Br,
Gruna

When Xiaomi's devices update to Nougat 7.0

Same as Title, i dont know when, somebody help me find a answer
Why?? Is it so crucial to be on the newest android ( it has all the bugs) rather then on really good and bugs free marshmallow?? You have Xiaomi device. I dont think they want to be so up to date with soft. You wane newest?? Buy Pixel!
Via Xiaomi Mi5 Karramaba!
Well, they already started building a nougat rom for the MI5 but currently there are still many things that don't work on the latest leaked beta. So it might take some time until Xiaomi release it officially.
I have the links for the leaked Nougat and i've already tested it.
It's 6.11.23
And the problems were:
- After installing google apps there is permanently force close of the google play services - no matter what kind of gapps i've tried.
- No way to dial number via keypad - it closes automaticaly and because of the google problems i haven't tested with saved numbers
- The inbuld root doesn't work
- The Browser becomes black from time to time and if that bug occurs i have to kill it before i can use it properly
- Antutu doesn't work
- 1.6gb free ram (not a problem, just observation).
If someone have new links and if it is not forbidden - please share them with us
p.p. Sorry for my English
s-u-f-f-e-r said:
I have the links for the leaked Nougat and i've already tested it.
It's 6.11.23
And the problems were:
- After installing google apps there is permanently force close of the google play services - no matter what kind of gapps i've tried.
- No way to dial number via keypad - it closes automaticaly and because of the google problems i haven't tested with saved numbers
- The inbuld root doesn't work
- The Browser becomes black from time to time and if that bug occurs i have to kill it before i can use it properly
- Antutu doesn't work
- 1.6gb free ram (not a problem, just observation).
If someone have new links and if it is not forbidden - please share them with us
p.p. Sorry for my English
Click to expand...
Click to collapse
And this is why there is no rush for Nougat, let them fix the issues, it's got MIUI8 over the top anyway, so differences will be minimal anyway.
DaveP2611 said:
And this is why there is no rush for Nougat, let them fix the issues, it's got MIUI8 over the top anyway, so differences will be minimal anyway.
Click to expand...
Click to collapse
You are right, but I really want to test it.
I was beta tester on Redmi note 3 Pro and now i have application for mi 5 global beta testers again.
I don't care about the bugs, I just want to test the different builds

Nokia5 Ports by Markus

Hello everybody! I waited for a long time for unofficial roms and source code, but.....you know. So i decided to make it by myself.
I ported 2 roms: RR from Xiaomi redmi 3s and stock from Asus zenfone 4 max
Both roms in alpha state, so i hope, you will help me with fixing bugs
Download links:
Asus port
Resurrection remix from xiaomi 3s
Installation:
1. Unlock you bootloader!!!!
2. Downgrade stock rom to 7.1x to avoid problems
3. copy on sd card
4. backup and wipe all
5.install zip
6. reboot
Works:
-sim
-3g/lte network
-internet sharing
-bluetooth
Bugs(not full list):
On both roms:
-no audio
-no wifi
-no sensor keys work
On rr:
-lockscreen cannot be unlocked, so i disable it first in secure settings
On asus port:
-rotated screen
-input sensor problem(can be fixed by libinput.so and may be in /hw folder by sensors.so)
If you want buy me coffe here is my paypal: https://www.paypal.me/markusll/
XDA:DevDB Information
Ports for nokia 5, ROM for the Nokia 5
Contributors
markus_ll
ROM OS Version: 7.x Nougat
Version Information
Status: Alpha
Created 2018-07-28
Last Updated 2018-07-28
Thanks ...waiting for more
Good job mate, will try to make out time to try it out
when we get the bug free custom rom
Jitender Baloda said:
when we get the bug free custom rom
Click to expand...
Click to collapse
Custom rom development on Nokia phones is a recent development, stable roms come about after lots of testing and sometimes with contribution from group of people.
Instead of asking when a stable rom will be ready which I'm sure the OP doesn't know, it would be more helpful if you helped by testing and maybe giving helpful suggestions on how he can fix bugs
@op the moto g5 has similar specs with the nokia 5 (apart from the display size) and uses almost stock android like Nokia. I wonder whether one it's possible to get some elements from there.
I do know that twrp for nokia 6 works for Nokia 5
@sltushar, I was wondering if you could help out with this, if you are into this kind of stuff
redweaver said:
@sltushar, I was wondering if you could help out with this, if you are into this kind of stuff
Click to expand...
Click to collapse
Okay, thanks for the invitation, i will try my best to make it on beta state or stable
Hello again. Here is new update. I think it's in pre-beta stage
What's new:
-fixed wifi
-better working stability
-fixed rotatated screen
-fixed input sensor
-remade ramdisk, it's looks like nokia original
-fixed hardware buttons (vol+,vol-,power)
Not working now
- touchpanel with fingerprint
- camera
- sound
- may be microphone???
- nfc
- may be something else (waiting for bug report messages)
Download link
Asus_pre_beta
P.S. if you want to speed up this process, try to fix sound or touchpanel with fingerprint
markus_ll said:
Hello again. Here is new update. I think it's in pre-beta stage
What's new:
-fixed wifi
-better working stability
-fixed rotatated screen
-fixed input sensor
-remade ramdisk, it's looks like nokia original
-fixed hardware buttons (vol+,vol-,power)
Not working now
- touchpanel with fingerprint
- camera
- sound
- may be microphone???
- nfc
- may be something else (waiting for bug report messages)
Download link
Asus_pre_beta
P.S. if you want to speed up this process, try to fix sound or touchpanel with fingerprint
Click to expand...
Click to collapse
Sorry i'm not more active, this is because I have limited internet data , however I can recommend this thread to other people I think might find this useful
markus_ll said:
P.S. if you want to speed up this process, try to fix sound or touchpanel with fingerprint
Click to expand...
Click to collapse
Where would you recommend to begin doing that?
Benderisas said:
Where would you recommend to begin doing that?
Click to expand...
Click to collapse
check boot.img first of all. i think i made all, but i can mistake. after check /bin -> libs -> /etc -> /vendor -> /framework
All works are stopped, because i changed phone. Good luck guys!
markus_ll said:
All works are stopped, because i changed phone. Good luck guys!
Click to expand...
Click to collapse
Oh maan.. you were my only hope!

Categories

Resources