Database Develop

[ROM] [CM12.1][WIP]CyanogenMod 12.1 for Xiaomi Redmi Note 3 [SnapDragon]

CyanogenMod 12.1 for Xiaomi Redmi Note 3 Snapdragon version​
Hi all,
This is a initial WIP CyanogenMod 12.1 for Redmi Note 3. It's a basic initial release and does have some bugs accompanied.
It's kind of usable build for those whom fingerprint doesn't matter
What works ?
Camera
Audio
RIL
Wifi
Bluetooth
Other basic stuff
What doesn't ?
Fingerprint
Other misc stuff that i might have not tested completely
Downloads:
Cm12.1 for Redmi Note 3 (30/03/2016)
Just a request to users :
Please don't mirror the ROM anywhere, as I need to keep track of downloads. Also avoid posting the direct download link in comments. Please use the download link I have put up in the OP.
Requirements to flash :
You need to have a unlocked bootloader to flash this in case anyone is going to flash
You need to have TWRP installed after that
You also need to wipe data
XDA:DevDB Information
CyanogenMod 12.1, ROM for the Xiaomi Redmi Note 3
Contributors
Santhosh M
Source Code: https://github.com/sandymanu/android_kernel_8952
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Beta Release Date: 2016-03-30
Created 2016-03-28
Last Updated 2016-05-21

Reserved
Reserved

Use some libs of this rom : http://forum.xda-developers.com/redmi-note/general/rom-qualcomm-base-rom-redmi-note-3-pro-t3346350

Naphtha said:
Use some libs of this rom : http://forum.xda-developers.com/redmi-note/general/rom-qualcomm-base-rom-redmi-note-3-pro-t3346350
Click to expand...
Click to collapse
Oh wow, is that possible? that would be great if you could do that. I never thought we could get cm 12.1 this quickly!

The recovery version of the aosp qualcomm rom. https://744c9d.lt.yunpan.cn/lk/cqKfQ258rvd8Z

Windslash31 said:
The recovery version of the aosp qualcomm rom. https://744c9d.lt.yunpan.cn/lk/cqKfQ258rvd8Z
Click to expand...
Click to collapse
And what can we do with that?
Do you mean you can flash it in recovery?

DrWillz said:
And what can we do with that?
Do you mean you can flash it in recovery?
Click to expand...
Click to collapse
Yes, it's flashable in recovery.
If someone can download it and upload it to Mega or Androidfileshost please, I can download it but at 15kb/s

Here is the mega link
https://mega.nz/#!bldGhI7b!PMiMnZCYSwXpdfTouuuE2F9MZPbPUqCNjfuz4FIP3ts

Awesome Santosh, Appreciate your time.

Update :
Fixed audio today

Santhosh M said:
Update :
Fixed audio today
Click to expand...
Click to collapse
Nice! I'll give it a go soon

New build released (29/03/2016)
Fixes audio
Settings->security fc
Please do note that this is very much a alpha build and not for a normal user
Regards
Santhosh

Thanks For Working on the project

hello ,This firmware is for redmi note 3, then everything works and the developer has created an application for fingerprint. Try to scratch firmware and library workers to take. http://4pda.ru/forum/index.php?showtopic=716960&view=findpost&p=46650108

Molniya said:
hello ,This firmware is for redmi note 3, then everything works and the developer has created an application for fingerprint. Try to scratch firmware and library workers to take. http://4pda.ru/forum/index.php?showtopic=716960&view=findpost&p=46650108
Click to expand...
Click to collapse
Yeah I think that's for MediaTek

I have wifi working now New build with wifi should be up today

Santhosh M said:
I have wifi working now New build with wifi should be up today
Click to expand...
Click to collapse
Libs of Qualcomm rom are working?
Inviato dal mio kenzo utilizzando Tapatalk

Naphtha said:
Libs of Qualcomm rom are working?
Inviato dal mio kenzo utilizzando Tapatalk
Click to expand...
Click to collapse
My base is only stock ROM of my device ( global stable )
I have also got RIL and bluetooth working
Should be a fairly usable build now

Santhosh M said:
My base is only stock ROM of my device ( global stable )
I have also got RIL and bluetooth working
Should be a fairly usable build now
Click to expand...
Click to collapse
Woop

Thanks for this great work. You have a link to some generic kernel source in the OP (for the Snapdragon chipset) but then you are talking about using the global stable kernel?
Have you looked at using the Qualcomm 'test' AOSP kernel?
As that version has a working kernel and the all the propeitary libs you could need I would imagine (other than a way of configuring the fingerprint reader - it does have a fingerprint service running - but no settings for adding a fingerprint - I see Fingerprint support is only being added to CM13 so we might have to wait ).
I am currently using that ROM (as I don't like MIUI) and can post a list of the /system folder if you are interested.

[16/11/2016]CyanogenMod 14.0/14.1 for Xiaomi Redmi Note 3 [VoLTE supported]

CyanogenMod 14.0/14.1 for Xiaomi Redmi Note 3 Snapdragon version​
Hi all,
This is a initial WIP cyanogenmod 14.1 build based on nougat. Since cm is very much in alpha stage there are bound to be lot of cm related bugs and device related bugs as well. Flash only if you want to.
What works ?
Wifi
Bluetooth
Audio
Camera
RIL
GPS
Fingerprint
Other basic things
What doesn't ?
CM related features or anything that's out of my scope and in CM scope
Goodix fingerprint should not be working ( not tested yet )
Stuff that i might have not noticed
Changelogs :
16/11/2016:
Sync with latest CM source (android_7.1.0_r7 and latest CM stuff)
Note : Cm has added Reliance jio apn by default now to their apn list and there seems to be a small bug related to this. So check your apn properly if data connection isn't working in Jio ( I had to modify APN type to default,supl on my personal usage)
Older Changelogs :
Note : I would recommend a clean flash of 05/11/2016 build as CM has database upgradation issue due to which you might face sim detection issue if dirty flashed
05/11/2016:
Sync with latest CM source.
Night display (accessed via quick tiles) is a addition from my end and is not a default CM feature
30/10/2016:
Initial CM14.1 release (please be noted that cm14.1 features might malfunction / totally nonworking )
Sync with latest CM
( VoLTE continues to work on a dirty flash if you were on my previous build) [ I just wiped cache and dalvik ]
17/10/2016 :
Sync with latest CM (some CM features work now)
Video recording should work fine now ( I recorded a couple of videos and captured few images. All look fine )
Initial blob level ( library support in ROM ) support for new camera sensors ( Kernel might still lack one or two new sensors )
Flac support
Improved device level performance
Other minor improvements
05/10/2016:
Sync with latest CM ( not much feature side, button backlight works nowthough)
VoLTE should now work out of the box. You don't need to flash tonnes of firmware zips ( Make sure you are clean flashing )
Camera fixes (Photo capture will work perfectly fine and won't crash anymore. Video recording is not still fully functional/functional totally)
Slightly improved performance and battery stability
Other misc changes
21/09/2016:
Sync with latest CM
Fixed the lags (device is smooth and normal now)
CM side issues such as external sd permission fixed ( fixed from cm side)
18/09/2016:
VoLTE support
Initial goodix support ( not tested yet and might be broken most likely. If u are going to test goodix flash my latest cm13 build and then come over to this rom )
Battery % bug fix ( -2%,50% thingy) [ I couldn't test because i have a older hardware]
Sync with latest CM
Minor improvements
13/09/2016 :
Sync with latest CM
Camera (photo capture) for other sensors
Night mode ( Access it from systemui tuner)
Should fix some performance issues ( make sure to switch to interactive after first boot)
other minor device level cleanups
Downloads:
Latest build (16/11/2016)
Requirements to flash :
You need to have a unlocked bootloader to flash this in case anyone is going to flash.
You need to have TWRP installed
You also need to wipe data and install ROM followed by gapps
XDA:DevDB Information
CM14.1 for Xiaomi Redmi Note 3, ROM for the Xiaomi Redmi Note 3
Contributors
Santhosh M
Source Code: https://github.com/sandymanu/android_kernel_xiaomi_kenzo
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Beta Release Date: 2016-11-16
Created 2016-09-11
Last Updated 2016-11-16

Screenshots & other info
Reserved

Woow nice downloading

Reserved

Great work mate. Keep the good work going

Thanks a lot was waiting for it
---------- Post added at 08:53 AM ---------- Previous post was at 08:53 AM ----------
Will test and report

Will try soon thank youuu
Sent from my Redmi Note 3 using Tapatalk

thank you bro .....

Thanks for this Work, I will test soon !

@Santhosh M android.phone.com fc on few sims
HOW TO FLASH AND A QUICK REVIEW :

anyone flash? screenshot please...thx...

Thank you!

Reserved
Sent from my Redmi Note 3 using Tapatalk

Here is the step by step tutorial video on how to install ANDROID NOUGAT 7.0 on redmi note 3 with a quick review
https://youtu.be/x1Fo8hogOdU

nice

Reserved

Great news...
A little bit laggy, but it works! Very good job for being an alpha build...
Thanks and regards!!

Santhosh M said:
CyanogenMod 14.0 for Xiaomi Redmi Note 3 Snapdragon version​
Hi all,
This is a initial WIP cyanogenmod 14 build based on nougat. Since cm is very much in alpha stage there are bound to be lot of cm related bugs and device related bugs as well. Flash only if you want to.
What works ?
Wifi
Bluetooth
Audio
Camera (only photo capture as of now, video rec is broken)
RIL
GPS
Fingerprint
Other basic things
What doesn't ?
Video recording
Photo capture on some rn3 devices ( My kernel doesn't yet support all camera sensors and only supports initial batch as of now)
CM related features or anything that's out of my scope and in CM scope
Stuff that i might have not noticed
Downloads:
Latest build (11/09/2016)
Requirements to flash :
You need to have a unlocked bootloader to flash this in case anyone is going to flash.
Also you need to be on latest M firmware to flash the ROM.
You need to have TWRP installed
You also need to wipe data and install ROM followed by gapps
XDA:DevDB Information
CM14 for Xiaomi Redmi Note 3, ROM for the Xiaomi Redmi Note 3
Contributors
Santhosh M
Source Code: https://github.com/sandymanu/android_kernel_xiaomi_kenzo
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Version Information
Status: Alpha
Beta Release Date: 2016-09-11
Created 2016-09-11
Last Updated 2016-09-11
Click to expand...
Click to collapse
Thank you man for your hard work.
Do you plan to release a device tree?

awesome!
Sent from my Redmi Note 3 using Tapatalk

Reserved
Sent from my Redmi Note 3 using Tapatalk
---------- Post added at 09:12 AM ---------- Previous post was at 09:11 AM ----------
tank0412 said:
Thank you man for your hard work.
Do you plan to release a device tree?
Click to expand...
Click to collapse
Obviously not?
Sent from my Redmi Note 3 using Tapatalk

[ROM][N2G47E] Resurrection Remix Nougat v5.8.3 Unoffical Build for MI 5S [Last Build]

Resurrection Remix Nougat v5.8.3 Unoffical Build
for Xiaomi MI 5S
Powered by Resurrection Remix
Build by nazunamoe
* ROM Information
- Built with Resurrection Remix lastest source
- Android 7.1.2 [N2G47E]
- Use Xiaomi's stock kernel (cause xiaomi didn't release kernel source yet)
* Thanks to
- Resurrection-Remix
- xiaobai112220

* Download Section
2017/04/28
B!GBOY said:
The problem is Wifi module, you can replace it with these files and it will work,
(I got the files from jpg3927 build)
just extract them under:
System\lib\modules
and set permissions just like it was before 644
Click to expand...
Click to collapse
check this post to fix wi-fi
Mirror link (AndroidFileHost) https://www.androidfilehost.com/?fid=745425885120728129
2017/04/15
Mirror link (AndroidFileHost) https://www.androidfilehost.com/?fid=529152257862719294
========== Android 7.1.2 =========
READ THIS
YOU NEED TO FLASH AND FIRST SETTING ANDROID 7.1.1 RR ROM BEFORE FLASHING 7.1.2 ROM
(cause 7.1.2 rom has setup wizard fc)
2017/04/09
Mirror link (AndroidFileHost) https://www.androidfilehost.com/?fid=673368273298946104
2017/04/05
Mirror link (AndroidFileHost) https://www.androidfilehost.com/?fid=529152257862717195
2017/03/30
Mirror link (AndroidFileHost) https://www.androidfilehost.com/?fid=817550096634758396
2017/03/28
Mirror link (AndroidFileHost) https://www.androidfilehost.com/?fid=745425885120720008
2017/03/26
Mirror link (Google Drive) https://drive.google.com/open?id=0B_N06BmAJ75ad3RDdGJGTlZ3Umc
2017/03/23
Mirror link (Google Drive) https://drive.google.com/open?id=0B_N06BmAJ75aS25XNnFLQXVwLTQ

My RR rom build is ended because MI 5S get official RR rom!

Amazing great job man, do you sometimes have plans to release a Natrium Build! It will be awesome!

What about bugs ?

apreciate for ur post
very rare in mi5s rom subs thread

Can anyone confirm if it has the same bugs as the Lineage roms?

droiduser said:
Can anyone confirm if it has the same bugs as the Lineage roms?
Click to expand...
Click to collapse
i used same device tree .vendor blob and kernel. so it's bug is same as xiaobai's build

thanks for contribution. what's news on and bug this rom RR?

Once again thanks buddy, I am sure sources are about to arrive, and then all your contributions will be gold...
In my opinion this is, with no doubt, the best ROM ever developed.
Thanks again!

Nice! Now it begins.... even before kernel release Can't wait for the release of the kernel when everything can be official. :victory:
Downloaded and awaits install :good:
keep up the good work!
Booth you and @xiaobai112220 (please make post about Lineage soon :fingers-crossed: )

Thanks a lot !
Is there any bug report already done or is it quite new?

Wow master don't stop the party
Enviado desde mi MI 5s mediante Tapatalk

Just downloaded and has been using this ROM for over 5 hours. So far so good. Super smooth. A few quirks here and there but I think that's just resurrection remix's fault. ROM is super smooth and fast. Thanks for this dev!

jpg3927 said:
i used same device tree .vendor blob and kernel. so it's bug is same as xiaobai's build
Click to expand...
Click to collapse
Hi. I'm an AOSP fan and i tried to build it for Angler (Nexus 6p). I never installed it though...
Can you point me to somewhere what I have to do to add your device tree and so on to AOSP so I could build for Capricorn? Or are you planning to do an AOSP build?
Thanks!

Running smooth since 8h ago. Great job!
Camera still buggy, but it's ok for now. I use long-press app shortcuts (and the camera app has recording and selfie shortcuts).
But please, PLEASE add the hardware button swapping script from @ru1dev so we can have the Nexus way of navigation built in, not as an extra flashing step.
Thanks for all the hard work! :good:

deleted

Works really smooth... One question: how to get home button to work as home button? It works as fingerprint scanner
Sent from my MI 5s using XDA Premium HD app

Thanks! Keep up the great work. Can't wait for xiaomi to release the sources !

marcel112 said:
Works really smooth... One question: how to get home button to work as home button? It works as fingerprint scanner
Sent from my MI 5s using XDA Premium HD app
Click to expand...
Click to collapse
Is this due off not having source code from xiaomi?
Sent from my MI 5s using XDA Premium HD app

|MARKW | BETA | AICP 12.1 | SonicBSV

Changes​¬The video recording in the camera has been fixed (so far ha1, without camera2api - hal3, as it should be at 7, because the proprietary of 6, the third party also works)!
¬Fixed voice recording in recorders and instant messengers
¬New Nosgoth 3.18.31 kernel is used (by Anomalchik, I'm on the hook)
¬The Code is Based on Razziell's sources so the changes are the Same
Bugs​¬Hearing on calls with active pop-up notifications (disinfected in settings - screen - pop-up notifications)
¬Stock camera green on video recording in the dark
¬Small Battery Drain caused by System?!
¬When connecting to the PC and then disconnecting the connection state remains active (reboot is required)
¬Fingerprint isn't working for me(FPC type) try for Goodix
Mod Edit​
Installation
¬Go to TWRP
¬Wipe and then Click on Advanced Wipe
¬Check the followings if you want a clean Installation:
[*]Davlik Cache,
[*]Cache,
[*]Data,
[*]System
¬Go back and click on Install
¬Find the ROM in the destination you saved it and Install it
¬then Install the GAPPS which can be found here ARM64->7.1->pico(recommended)
¬Reboot and Proceed​
Contributors
SonicBSV
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: 8.2.*
Based On: LineageOS
Version Information
Status: Beta
Beta Release Date: 2017-08-09
P.S. Made a thread just for announcing, if SonicBSV does not approve it I'll take it down
All Credits go to SonicBSV

For PC connection bug, i have the same bug on RR so i think it's knowed, and i think it's depends with some installation steps...

N1ck474 said:
For PC connection bug, i have the same bug on RR so i think it's knowed, and i think it's depends with some installation steps...
Click to expand...
Click to collapse
Haven't faced this bug.
But I've seen it on my friend's phone

psykkuno said:
Haven't faced this bug.
Click to expand...
Click to collapse
I've faced it only one time on RR, for example if u connect and disconnect your phone from PC when it installing a ROM you have this bug, i don't know how to escape from this strange thing.

N1ck474 said:
I've faced it only one time on RR, for example if u connect and disconnect your phone from PC when it installing a ROM you have this bug, i don't know how to escape from this strange thing.
Click to expand...
Click to collapse
Interesting.

psykkuno said:
Changes​¬The video recording in the camera has been fixed (so far ha1, without camera2api - hal3, as it should be at 7, because the proprietary of 6, the third party also works)!
¬Fixed voice recording in recorders and instant messengers
¬New Nosgoth 3.18.31 kernel is used (by Anomalchik, I'm on the hook)
¬The Code is Based on Razziell's sources so the changes are the Same
Bugs​¬Hearing on calls with active pop-up notifications (disinfected in settings - screen - pop-up notifications)
¬Stock camera green on video recording in the dark
¬Small Battery Drain caused by System?!
¬When connecting to the PC and then disconnecting the connection state remains active (reboot is required)
¬Fingerprint isn't working for me(FPC type) try for Goodix
Download From GDrive​
Installation
¬Go to TWRP
¬Wipe and then Click on Advanced Wipe
¬Check the followings if you want a clean Installation:
[*]Davlik Cache,
[*]Cache,
[*]Data,
[*]System
¬Go back and click on Install
¬Find the ROM in the destination you saved it and Install it
¬then Install the GAPPS which can be found here ARM64->7.1->pico(recommended)
¬Reboot and Proceed​
Contributors
SonicBSV
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: 8.2.*
Based On: LineageOS
Version Information
Status: Beta
Beta Release Date: 2017-08-09
P.S. Made a thread just for announcing, if SonicBSV does not approve it I'll take it down
All Credits go to SonicBSV
Click to expand...
Click to collapse
Hi. Why acip and not aicp?

dominiksundas said:
Hi. Why acip and not aicp?
Click to expand...
Click to collapse
Oops got me

psykkuno said:
Oops got me
Click to expand...
Click to collapse
No problem man

dominiksundas said:
No problem man
Click to expand...
Click to collapse
As an excuse I'll say that I did it οn purpose for you to find out haha :angel:

How is this ROM is different from RR or CrDroid?
Does it have extra customization options like those mentioned ROM?
Currently I'm using LineageOS 14.1, perhaps I will give this ROM a try too.

abhi281 said:
How is this ROM is different from RR or CrDroid?
Does it have extra customization options like those mentioned ROM?
Currently I'm using LineageOS 14.1, perhaps I will give this ROM a try too.
Click to expand...
Click to collapse
Youtube.
Yes it has customisation options.

What are the bugs? How's battery life and performance?

Add link to 4pda thread

Hello, would you set up a slim ROM for us,it's more smoothly and less power efficient,It's perfect for guys who want to be smoother, more stable, and more energy efficient.but i find less developers to building slim for devices.

Thread closed as there is no kernel source provided.
Please PM me once the source is up.

[ROM][OneUI][9.0] BlackBird OS For G610X

Welcome to BlackBirdOS For Galaxy J7 Prime
ONLY FOR G610X​
Some information you should know..
This is a full Samsung OneUI port with android version 9.0
Any sort of File Kanging will be reported without hesitation.
If like my work Hit the Thanks button.
RULES OF POSTING : READ everything before commenting, And especially the instlal steps, the rom has been tested throughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, dont just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
Features
Fully ported G611F ROM
Android 9.0
Samsung OneUI V1.1
Semi-Deodexed
Full DualSIM Support
SafteyNet CTS Pass
Heavily debloated
Zipaligned
Very Optimised
Battery and performance focused
Full Samsung OneUI without missing vital apps
Rootable with Magisk
RMM/KnoxGuard/Defex Free
And many more
Extra Features :-
All the original features are present (Wifi,Bluetooth etc)
Ultra Light Base
Pre Rooted
Latest Camera UI
Samsung Face Recognition
Adjusted the framework for 16:9 Aspect ratio (instead of buggy 18.5:9)
DE-Knoxed and disabled Additoinal samsung root preventions and secuirty spams
Added CSC Features
VoLTE Support for INS users and countries that use it
BixbyHome.
Many prop tweaks
Many feature tweaks
And many more additions from My previous ROMs
Check the changelogs for the FULL feature set
OXYGEN Kernel V6.0
- Basic Kernel To Boot Android Pie
- Based On Stock Sources
- Latest Drivers and R28 GPU Driver
- Overclocked to 1.7Ghz
- Samsung Security Disabled
- Disabled more knox and useless logging
- FakeKnox
- Bootstate Green for safteynet
- Patched some props for safteynet
- Reduced GMS Wakelocks
- Init.D Support
- Other minor improvments
and many more goodies
Installation
ensure you have LATEST TWRP from Here
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,DATA,CACHE,DALVIK and preferably Internal storage all together)
Flash the ROM.ZIP
After the boot animation is on for 15~20 Seconds. Hold VolumeDown+power until the device reboots
Setup your rom and READ the F.A.Q for more information.
None So Far
IF you helped in this rom and i forgot you, tell me in a PM or in a reply
@KassemSYR For Porting!
@ananjaser1211 For Camera Patch
@DarkLord1731 For Oxygen Kernel
XDA:DevDB Information
BlackBirdOS, ROM for the Samsung Galaxy J7
Contributors
KassemSYR
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: Latest Modem & Bootloader
Version Information
Status: Stable
Current Stable Version: 1.0
Created 2019-05-15
Last Updated 2019-05-15

NewsChannel : Telegram
BlackBird OS V6.0 :
Download : XDA
BlackBirdOS.Lite V1.0 :​
Download : XDA
OLD
BlackBird OS V5.1
Download : XDA
BlackBird OS V5.0
Download : XDA
BlackBird OS V4.0
Download : XDA
BlackBird OS V3.0 Based On A505F
Download : XDA
BlackBird OS V2.0 Based On G611F/N935F
Download : XDA
BlackBird OS V1.0 Based On G611F
Download : MEGA
Donation : Paypal
Kernel Sorces : github

mine

reserved
also mine

Awesome Rom Sir Thanks for your effort ???

Thanks for the rom, and your time expended on it, to make it possible for us to use it, i will flash it now and test it .

KassemSYR said:
NewsChannel : Telegram
Come hang with us on our chat : Telegram
BlackBird OS V1.0 Based On G611FDDU1CSD8
LINK : MEGA
Donation : Paypal
Kernel Sorces : github
Click to expand...
Click to collapse
Thanks for this rom bro. We're going to try this now.

Does the Rom run under G611F ( J7 Prime 2)?

I don't have the latest Twrp 3.3.0 .but i think 3.2.3 might do the job or am i wrong??

@KassemSYR..... Nice work.
Please can you provide me with the flashable camera fix for those of us that had flashed the main J7 prime 2 firmware on our j7 prime?
Thank you for your effort Bro.

micosal said:
@KassemSYR..... Nice work.
Please can you provide me with the flashable camera fix for those of us that had flashed the main J7 prime 2 firmware on our j7 prime?
Thank you for your effort Bro.
Click to expand...
Click to collapse
did you really flash the j7 prime 2 on our prime?? what are bugs on it??

jusipism said:
did you really flash the j7 prime 2 on our prime?? what are bugs on it??
Click to expand...
Click to collapse
The major bug is front camera doesn't work.

micosal said:
The major bug is front camera doesn't work.
Click to expand...
Click to collapse
what more? is the device smooth like stock 8.1? i love to test it later thanks mate

tytfusokhszxc said:
I don't have the latest Twrp 3.3.0 .but i think 3.2.3 might do the job or am i wrong??
Click to expand...
Click to collapse
Edit: It worked flawlessly

jusipism said:
what more? is the device smooth like stock 8.1? i love to test it later thanks mate
Click to expand...
Click to collapse
Well I only observed front camera bug within few hours of usage. It is very stable like oreo 8.1.0 if the front camera bug can be fixed.
Since @KassemSYR has been able to port it and fixed front camera, I would advise you download his ported rom. I only need the fixed because I had already flashed j7 prime 2(g611f) and I don't have much data to download the ported rom.

micosal said:
Well I only observed front camera bug within few hours of usage. It is very stable like oreo 8.1.0 if the front camera bug can be fixed.
Since @KassemSYR has been able to port it and fixed front camera, I would advise you download his ported rom. I only need the fixed because I had already flashed j7 prime 2(g611f) and I don't have much data to download the ported rom.
Click to expand...
Click to collapse
im currently using the blackbird os, it seems really good rom all is working.. i hope mr @KassemSYR will provide how to fix the front cam for stock g611f

jusipism said:
im currently using the blackbird os, it seems really good rom all is working.. i hope mr @KassemSYR will provide how to fix the front cam for stock g611f
Click to expand...
Click to collapse
there won't be any patch for front cam bug

hai9997 said:
there won't be any patch for front cam bug
Click to expand...
Click to collapse
why?? im hoping about it man~

Good job bro
Keep the good stuff up ❤

Incredible rom Mr Kaseem! You never fail to impress!