I want to flash my touch hd with my sd card.
give me step to step info.
1: download the ROM to your storage card
2: UNZIP the ROM using the 7zip utility found here
http://www.qweas.com/downloads/syste...ws-mobile.html
3: Rename the unzipped ROM image from ******.nbh to BLACIMG.nbh
4: Move the BLACIMG.nbh file from the folder you unzipped it to accross to the ROOT of the SD Card
5: (This is important) Press and hold the volume DOWN button ONLY, not the up button as if you were hard resetting
6: when you see the 3 colour boot screen it WILL change to a screen asking if you want install the new ROM upgrade, press the power to start the install
7: Finally when finished remove the battery to power the handset down and then reinsert and restart the phone Hard resetting twice before allowing it to boot fully for the first time.
Good Luck
or alternatively read the wiki, forum rules and the stickies at the top of each forum before creating a new thread
Thread closed
Im writing this because i have gone through this and realised some things and basics about this phone.As Meticulus has wrote on his page about dumping files,that is the key of getting back to safety.Usually people here get stuck while getting back from Nougat to MM.So most important things to have :
-backup of oem info(i will post link later of flashable zip for l21 model) (or someone else's files but for specified model(l21 can flash someone else's l21 oem info)
link : C4320 DUALSIM OEMINFO https://drive.google.com/file/d/0B3sZyHMlYDO0S1c2Y1lNMlJaVXM/view credits to guy who made this file i have just uploaded it
-dump of system and boot (you can find tutorial on Meticulus page)
-downloaded stock MM ROM and extracted UPDATE.APP
-Revolution nougat recovery
-Meticulus TWRP
So lets say you are in bootloop and there is nothing you can do to get your phone back to life.
*if you are on nougat and dont have recovery:
-turn off the device and insert your sd card to PC/laptop and make folder "dload" on sd.
-extract UPDATE.APP from MM ROM package and move it to dload folder
-download revolution nougat recovery and make a path on desktop for example
-connect your usb cable to pc (not phone)
-now (assuming that your device is off) hold volume down for few seconds and connect to our usb cable and phone will boot to bootloader/rescue mode
-open cmd on pc
-write ~ fastboot flash recovery path/recovery.img (path should be folders where is recovery.img and recovery.img name of img)
-when done,hold power and volume up power and phone will go to recovery
-if you havent done that yet,move dload folder and flashable oem info to sd card
-flash oeminfo and turn off the device
-now hold volume up + volume down + power button to install that update from sd card
phone should boot now
*If you have nougat recovery :
-turn off the device and insert your sd card to PC/laptop and make folder "dload" on sd.
-extract UPDATE.APP from MM ROM package and move it to dload folder
-flash oem info and turn off the device
-now hold volume up + volume down + power button to install that update from sd card
phone should boot now
*Now if the device is still stuck in bootloop and now you dont have recovery:
-download meticulus recovery and extract recovery.img
-move your dump files to sd card (folder name meticulus)
-if your phone is off again hold volume down for few seconds than connect usb cable
-open cmd and type : fastboot flash recovery path/recovery.img (path should be folders where is recovery.img and recovery.img name of img)
-when done hold volume up + power button until phone gets into TWRP
-go to advanced/extras/restore dump and wait while device is restoring your stock system and boot img
after done reboot your device and it should boot without any problem
write down other ways of bootloops so we can fix it together
where is the meticulus page?
diorenzo said:
where is the meticulus page?
Click to expand...
Click to collapse
www.meticulus.co.vu
Bluezzy said:
www.meticulus.co.vu
Click to expand...
Click to collapse
ok and where is the dump?
diorenzo said:
ok and where is the dump?
Click to expand...
Click to collapse
You must dump files manually (Marshmallow) with Meticulus recovery.I said to follow instructions on his page not to download
Bluezzy said:
You must dump files manually (Marshmallow) with Meticulus recovery.I said to follow instructions on his page not to download
Click to expand...
Click to collapse
lol sorry, btw i have nougat twrp and there isn't dumb in advances so i don't know...
i think the only thing that can saves me is a backup of twrp
cause i can't flash anything from twrp nor from fastboot
diorenzo said:
lol sorry, btw i have nougat twrp and there isn't dumb in advances so i don't know...
i think the only thing that can saves me is a backup of twrp
cause i can't flash anything from twrp nor from fastboot
Click to expand...
Click to collapse
Ohhh then,you should have done that while you was on MM with Meticulus TWRP...
Bluezzy said:
Im writing this because i have gone through this and realised some things and basics about this phone.As Meticulus has wrote on his page about dumping files,that is the key of getting back to safety.Usually people here get stuck while getting back from Nougat to MM.So most important things to have :
-backup of oem info(i will post link later of flashable zip for l21 model) (or someone else's files but for specified model(l21 can flash someone else's l21 oem info)
link : C4320 DUALSIM OEMINFO https://drive.google.com/file/d/0B3sZyHMlYDO0S1c2Y1lNMlJaVXM/view credits to guy who made this file i have just uploaded it
-dump of system and boot (you can find tutorial on Meticulus page)
-downloaded stock MM ROM and extracted UPDATE.APP
-Revolution nougat recovery
-Meticulus TWRP
So lets say you are in bootloop and there is nothing you can do to get your phone back to life.
*if you are on nougat and dont have recovery:
-turn off the device and insert your sd card to PC/laptop and make folder "dload" on sd.
-extract UPDATE.APP from MM ROM package and move it to dload folder
-download revolution nougat recovery and make a path on desktop for example
-connect your usb cable to pc (not phone)
-now (assuming that your device is off) hold volume down for few seconds and connect to our usb cable and phone will boot to bootloader/rescue mode
-open cmd on pc
-write ~ fastboot flash recovery path/recovery.img (path should be folders where is recovery.img and recovery.img name of img)
-when done,hold power and volume up power and phone will go to recovery
-if you havent done that yet,move dload folder and flashable oem info to sd card
-flash oeminfo and turn off the device
-now hold volume up + volume down + power button to install that update from sd card
phone should boot now
*If you have nougat recovery :
-turn off the device and insert your sd card to PC/laptop and make folder "dload" on sd.
-extract UPDATE.APP from MM ROM package and move it to dload folder
-flash oem info and turn off the device
-now hold volume up + volume down + power button to install that update from sd card
phone should boot now
*Now if the device is still stuck in bootloop and now you dont have recovery:
-download meticulus recovery and extract recovery.img
-move your dump files to sd card (folder name meticulus)
-if your phone is off again hold volume down for few seconds than connect usb cable
-open cmd and type : fastboot flash recovery path/recovery.img (path should be folders where is recovery.img and recovery.img name of img)
-when done hold volume up + power button until phone gets into TWRP
-go to advanced/extras/restore dump and wait while device is restoring your stock system and boot img
after done reboot your device and it should boot without any problem
write down other ways of bootloops so we can fix it together
Click to expand...
Click to collapse
The OEMInfo is for C432 VNS-L31 version or L21?
RazOne said:
The OEMInfo is for C432 VNS-L31 version or L21?
Click to expand...
Click to collapse
L21 ,sorry i forgot to write
After I flash the OEMinfo it stays a while at the Huawei Logo then goes in eRecovery
themetester said:
After I flash the OEMinfo it stays a while at the Huawei Logo then goes in eRecovery
Click to expand...
Click to collapse
After flashing oeminfo,did you restore Upadate.app MM eith 3 buttons method??
Bluezzy said:
After flashing oeminfo,did you restore Upadate.app MM eith 3 buttons method??
Click to expand...
Click to collapse
So.. I flash oeminfo , I turn the phone off and I press the 3 buttons. Nothing happens , only after some time it kicks into eRecovery
---------- Post added at 06:53 PM ---------- Previous post was at 06:44 PM ----------
Bluezzy said:
After flashing oeminfo,did you restore Upadate.app MM eith 3 buttons method??
Click to expand...
Click to collapse
I GOT IT TO WORK. I redownloaded the oeminfo.
**EDIT**
And it failed to verify I used 151 trying 130 rn. Mine shipped with the August Security Patch what shall i use?
themetester said:
So.. I flash oeminfo , I turn the phone off and I press the 3 buttons. Nothing happens , only after some time it kicks into eRecovery
---------- Post added at 06:53 PM ---------- Previous post was at 06:44 PM ----------
I GOT IT TO WORK. I redownloaded the oeminfo.
And it failed to verify I used 151 trying 130 rn. Mine shipped with the August Security Patch what shall i use?
Click to expand...
Click to collapse
Uhhh easy.. So you flashed oeminfo and also flashed update?
Bluezzy said:
Uhhh easy.. So you flashed oeminfo and also flashed update?
Click to expand...
Click to collapse
yea and it says at around 50% Failed to check the package content.
Great guide. I succesfully downgraded from B336 to B160 . Thanks!
If you follow the steps .. nothing can go wrong!
RazOne said:
Great guide. I succesfully downgraded from B336 to B160 . Thanks!
If you follow the steps .. nothing can go wrong!
Click to expand...
Click to collapse
On what model?
themetester said:
yea and it says at around 50% Failed to check the package content.
Click to expand...
Click to collapse
Try different version of MM
Bluezzy said:
Try different version of MM
Click to expand...
Click to collapse
I tried 151 and 131 now trying 150 and downloading 130. Do you have a telegram?
themetester said:
I tried 151 and 131 now trying 150 and downloading 130. Do you have a telegram?
Click to expand...
Click to collapse
Man if you have L21 and followed instructions for your problem here,Im sure you wont be stuck like that..Try again only i can tell you is already written in first post
Bluezzy said:
Man if you have L21 and followed instructions for your problem here,Im sure you wont be stuck like that..Try again only i can tell you is already written in first post
Click to expand...
Click to collapse
L21 of course. And yea , thanks.
---------- Post added at 08:08 PM ---------- Previous post was at 07:49 PM ----------
Bluezzy said:
Man if you have L21 and followed instructions for your problem here,Im sure you wont be stuck like that..Try again only i can tell you is already written in first post
Click to expand...
Click to collapse
yea my phone is dead. nothing flashes i tried 151 150 131 130 and now I am trying the first one available.
I upgraded via firmware finder, but now I find myself with an incomplete version, NRD90M test-keys, many basic functions don't work, what can I do?
roll back, follow the guide!
albj13 said:
roll back, follow the guide!
Click to expand...
Click to collapse
Hello, go to this link mega:#fm/i5x1SQiD is downloaded to the folder where there is inside another 'dload' folder that you will copy to a microSD which in turn will need to enter in P9 Plus. It 'a file that I downloaded from this forum, but I do not remember which thread. Then restart your phone by holding down the volume button in the center (Ne below and above it). At that point it will start loading and at the end will reboot or do you start again. This allows you to change the microSD with another in which there is always the dload folder with the file corresponding to your update.app P9 Plus firmware. Repeat the reboot and hold the volume button. Unless smoothly you should go back an Android Marshmallow.
In a lot of Facebook Groups, there are people asking about downgrade from Nougat to Marshmallow.
In my case, Im from México and every week there are at least 2 or 3 people asking about to return their devices to AT&T Marshmallow firmware.
I bring this little guide to show you how to do it, I hope that it could be helpful to you.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices.
* YOU are choosing to make these modifications.
*/
Preparation:
You will need to download this files:
- Recovery Installation:
Google Drive Link: https://drive.google.com/open?id=0B0rGM0R-mSexMmFUSzJ3SlZsclk
Mega Link: https://mega.nz/#!BEFiETSL!c5L5kDcA2RVAvKYmQLEvd3B-8lYFv86IEHo83DXGxNg
Dropbox Link: https://www.dropbox.com/s/ayq9zfrk3ncf5i0/TWRP%20nougat.rar?dl=0This file contains a file .bat, just open it and follow the instructions on the screen
- OEMInfo C212
Google Drive Link: https://drive.google.com/open?id=0B0rGM0R-mSexREJNeDJndm1VZm8
Mega Link: https://mega.nz/#!kRFSmaiI!eN7q9382qQqT0ULmZg-hKwDtgxEDlWds4flwB0YGMl0
Dropbox Link: https://www.dropbox.com/s/nf93zsduhfmpfjt/OEMINFO%20C212%20ATT.zip?dl=0
- Firmware L23C212B130
Dropbox Link: https://www.dropbox.com/sh/5kvpa2uqqzunznb/AABruT785fikTkoPVcym5hF4a?dl=0
Mega Link: https://mega.nz/#F!oRlizARZ!cx0b32yCvXpV3e7oYRC1JQ
Google Drive: https://drive.google.com/open?id=0B0rGM0R-mSexX2RHVkJRTDBUQzg
Huawei Mexico Official Page: http://download-c1.huawei.com/download/downloadCenter?downloadId=92443&siteCode=mx
How to do it:
Follow this steps carefully, I will not be responsible for damages on your device!
If you will use "Internal Storage" to install the files, put them there after unlock your bootloader, otherwise it will be erased
Ok, let's start the guide:
1. Unlock your bootloader and be sure that your device has USB Debug and OEM Info activated
2. Put your device in Fastboot Mode (Vol - and plug the usb cable connected to the PC) and execute the file "P9 LIte TWRP Installation.bat" and follow the instructions, it will install on your computer the Huawei Drivers if you don't have it.
NOTE: In the rar file there are two "twrp.img" (twrp.img and twrp2.img), I set "twrp.img" by default, this file is the original recovery from TWRP, you can install all the files from internal storage if you dont have Micro SD. The file "twrp2.img" let's you install the files only from the Mico SD card. Please, use the file that you find better.
3. After the Installation your phone will restart, once it do it copy the dload folder and OEMInfo to your SD or Internal Storage root and restart your device into Recovery Mode (Vol + and Power).
4. In Recovery Mode, please find the file "OEMINFO C212 ATT.zip" on your Micro SD Card or Internal Storage and flash it.
5. After that, power off your device and press the three buttons (Vol -, Vol + and Power) and wait for the dload installation.
In some cases the installation ask you for a password, you can enter any password, when it shows you a decrypting data error, it will do a factory reset and inmediately will start the firmware.
And it's all :highfive:, please DO NOT DO A FACTORY RESET AFTER THIS INSTALLATION, you can softbrick your device.
After this installation, if you want to install future OTA's, you need to install again the firmware through dload method, follow the step 5, this installation will let you relock your bootloader and install future OTA's through Huawei's system updater
Specially thanks to:
EloyGomez
KingOfMezi
CATUVA 21
With their videos and files was so easy to downgrade this device
Hello,
Do you know if the OEMInfo C212 will work with the L09?
Thank you!
l_pacheco said:
Hello,
Do you know if the OEMInfo C212 will work with the L09?
Thank you!
Click to expand...
Click to collapse
Uhm... Idk, I just tried it in a L23. You can try, but is under your own risk
Thread has been closed due to OP request.
Thank you.
I noticed number of people not got Nought in P9 due to Bad Firmware Updated.
i found method from internet.
i dint no will void warranty or not but definitely people get Nought and further updated via OTA
First Method use for Downgrade till B180
Backup all important data
Charge Battery up to 50%
Enable OEM unlock in developer options
Make dload folder on sd card
Extract update.zip and copy update.app to dload folder, Switch off your phone and hold 3 buttons (volume up, volume down, and power) until you see update start screen.
Follow next steps only if 1st file installed successfully
Remove update.app file from dload folder.
After that extract “update_data_full_hw_meafnaf.zip” and move all files to dload folder and install it, using 3 button force update method (Switch off your phone and hold 3 buttons (volume up, volume down, and power) until you see update start screen.
Second Method Update to Nought
Enable OEM unlock in developer options
Download Huawei updater from This Link
Download latest Hisuite from official huawei website.
Open huawei updater, tick in custom rom, in custom rom version type EVA-L19C185B385
In Custom rom URL copy this link http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1583/g104/v80560/f2/
Then tick custom port, don’t change it.
now connect your phone with pc and make sure Hisuite recognizes and connected properly. then just open Hisuite menu and change network settings as shown in image below.
Source : http://ministryofsolutions.com/2017...gat-b385-update-emui5-middle-east-africa.html