Viper4Android for Android Nougat is out but after installing it I realized that MusicFX is still present in my ROM and V4A is not working inside all apps.
So I have created this simple Viper4Android Cleaner script to take care of that.
I have tested this on all Nougat ROM available right now and it's working very well. The script will remove MusicFX, AudioFX, SoundFX or DSPManager.
Also in order to make V4A working inside any app, audio_effects.conf and audio_policy.conf needed to be replaced.
In short all you need to do is flash it in TWRP before or after V4A installation.After when you boot up there is no need to update driver anymore.
It's all done, just turn that switch ON in V4A app and enjoy your favorite tunes.
ViPER4Android_2.5.0.5_guitardedhero.zip can be found here.
Nice, good job!
v1.3 is out, some little script cleaning...
Emilius said:
Viper4Android for Android Nougat is out but after installing it I realized that MusicFX is still present in my ROM and V4A is not working inside all apps.
So I have created this simple Viper4Android Cleaner script to take care of that.
I have tested this on all Nougat ROM available right now and it's working very well. The script will remove MusicFX, AudioFX, SoundFX or DSPManager.
Also in order to make V4A working inside any app, audio_effects.conf and audio_policy.conf needed to be replaced.
In short all you need to do is flash it in TWRP before or after V4A installation.After when you boot up there is no need to update driver anymore.
It's all done, just turn that switch ON in V4A app and enjoy your favorite tunes.
ViPER4Android_2.5.0.5_guitardedhero.zip can be found here.
Click to expand...
Click to collapse
??????
xiabai said:
??????
Click to expand...
Click to collapse
???????
xiabai said:
??????
Click to expand...
Click to collapse
Emilius said:
???????
Click to expand...
Click to collapse
?????????
raptoro07 said:
?????????
Click to expand...
Click to collapse
LOL
I heard about the Viper recently just 2 days ago..I just rooted my phone nexus 6 yesterday..Can anyone explain me how to install the Viper4android in my nexus 6 with detailed steps if possible..thank you so much in advance..
suprithh18 said:
I heard about the Viper recently just 2 days ago..I just rooted my phone nexus 6 yesterday..Can anyone explain me how to install the Viper4android in my nexus 6 with detailed steps if possible..thank you so much in advance..
Click to expand...
Click to collapse
1. Grap ViPER4Android_2.5.0.5_guitardedhero.zip and Viper4Android Cleaner from first post
2. boot in TWRP
3. Flash Viper4Android Cleaner
4. Flash ViPER4Android_2.5.0.5_guitardedhero
5. Reboot
6. Open Viper app and turn it ON
Emilius said:
1. Grap ViPER4Android_2.5.0.5_guitardedhero.zip and Viper4Android Cleaner from first post
2. boot in TWRP
3. Flash Viper4Android Cleaner
4. Flash ViPER4Android_2.5.0.5_guitardedhero
5. Reboot
6. Open Viper app and turn it ON
Click to expand...
Click to collapse
Thank you so much..worked perfectly..Is there any setting I have to do after doing this steps..or I can use it just after reboot..
suprithh18 said:
Thank you so much..worked perfectly..Is there any setting I have to do after doing this steps..or I can use it just after reboot..
Click to expand...
Click to collapse
In the Viper app there is a lot of options to play. You will need some time to set it up but once you are happy with results you can save your profile so next time you don't need to do it again.
I also just added My Viper profile in firs post if anyone like to try it. Extract it to internal storage/Viper4Androd/Profile folder and load it up with Viper app :good:
That is couple years old profile and I have fine tune it so many times...
Emilius said:
I also just added My Viper profile in firs post if anyone like to try it. Extract it to internal storage/Viper4Androd/Profile folder and load it up with Viper app :good:
That is couple years old profile and I have fine tune it so many times...
Click to expand...
Click to collapse
Sure, Thank you
---------- Post added at 09:20 PM ---------- Previous post was at 09:17 PM ----------
suprithh18 said:
Sure, Thank you
Click to expand...
Click to collapse
I didnt find any profile in first post. Can you please post it here.
suprithh18 said:
Sure, Thank you
---------- Post added at 09:20 PM ---------- Previous post was at 09:17 PM ----------
I didnt find any profile in first post. Can you please post it here.
Click to expand...
Click to collapse
My Viper Profile
Emilius said:
My Viper Profile
Click to expand...
Click to collapse
Loaded..Thank you so much..
Just wanted to say thanks to the OP. First time in a long time I've been able to get V4A working on my N6!!
Everything works flawlessly!
usafle said:
Just wanted to say thanks to the OP. First time in a long time I've been able to get V4A working on my N6!!
Everything works flawlessly!
Click to expand...
Click to collapse
Happy to hear that
Emilius said:
Happy to hear that
Click to expand...
Click to collapse
Hi mate, this script also uninstalls ViPERAtmos? Do you think it works in N5X? Thanks
panamera2011 said:
Hi mate, this script also uninstalls ViPERAtmos? Do you think it works in N5X? Thanks
Click to expand...
Click to collapse
No, the script will not remove old versions of viper or any other viper combinations. There is just to many files for me to track. This is meant to be for fresh ROM installations, to remove default effects and make ROM ready for V4A.
N5X should be okay but I don't have that device so I can not test it.
Emilius said:
I also just added My Viper profile in firs post if anyone like to try it. Extract it to internal storage/Viper4Androd/Profile folder and load it up with Viper app :good:
That is couple years old profile and I have fine tune it so many times...
Click to expand...
Click to collapse
Thanks you very much! Worked like a charm. Bluetooth profile didn't load but the others did no problem. No big deal. But thanks again!
Related
Hi guys,
Personally I like the Stock LP 5.0.x Google Sounds used on the Nexus devices, so I made a flashable zip for any LP 5.0.x custom ROM.
Just flash on your favorite recovery and profit (it will remove all system/audio folder so please make a backup).
Tested on Official CM12 nightlies but will work on any LP 5.0.x custom ROM.
Code:
Extracted from the Google 5.0.1 (LRX22C) Factory Image for the Nexus 6
MEGA | Mediafire
@gianton will it work on cm11 44s?
rafiuddinrozman said:
@gianton will it work on cm11 44s?
Click to expand...
Click to collapse
Yes most likely it'll work, make a backup first of your audio folder.
gianton said:
Yes most likely it'll work, male a backup first of your audio folder.
Click to expand...
Click to collapse
Will backup my audio first and try. Thanks @gianton :good:
---------- Post added at 05:27 PM ---------- Previous post was at 05:20 PM ----------
gianton said:
Yes most likely it'll work, male a backup first of your audio folder.
Click to expand...
Click to collapse
Report.
Messages : Error executing updater binary in zip.
What does it mean?
rafiuddinrozman said:
Will backup my audio first and try. Thanks @gianton :good:
---------- Post added at 05:27 PM ---------- Previous post was at 05:20 PM ----------
Report.
Messages : Error executing updater binary in zip.
What does it mean?
Click to expand...
Click to collapse
Which recovery are you using? Working fine with twrp 2.8.3.0 for me.
gianton said:
Which recovery are you using? Working fine with twrp 2.8.3.0 for me.
Click to expand...
Click to collapse
same recovery with you. i'll try download again. maybe bad download.
Sad to report that I am having the same issues as well. On the latest version of TWRP
edit: My workaround was just to extract the .zip and manually delete and replace the ones in my system/media folder. Thanks for the sounds! I couldn't find them anywhere without having to extract from a Lollipop ROM
OP updated with a new link, maybe it was a bad upload. Tested this morning again with Euphoria 01/12 build and worked fine.
gianton said:
OP updated with a new link, maybe it was a bad upload. Tested this morning again with Euphoria 01/12 build and worked fine.
Click to expand...
Click to collapse
Update : Its work @gianton ... :good:
Thanks
CM12 has different sounds than stock AOSP? 0_o
CraZY_BoY^ said:
CM12 has different sounds? 0_o
Click to expand...
Click to collapse
Yes, still use the ones from CM11.
gianton said:
Hi guys,
Personally I like the Stock LP 5.0.x Google Sounds used on the Nexus devices, so I made a flashable zip for any LP 5.0.x custom ROM.
Just flash on your favorite recovery and profit (it will remove all system/audio folder so please make a backup).
Tested on Official CM12 nightlies but will work on any LP 5.0.x custom ROM.
Code:
Extracted from the Google 5.0.1 (LRX22C) Factory Image for the Nexus 6
MEGA | Mediafire
Click to expand...
Click to collapse
Just a quick question, does this just add the LP sounds to the folder or replace the whole thing? I don't think this worked for me, as I can still see all the CM ringtones and sounds when I try to change my ringtone. Maybe I messed something up. Thanks.
cgjjaf said:
Just a quick question, does this just add the LP sounds to the folder or replace the whole thing? I don't think this worked for me, as I can still see all the CM ringtones and sounds when I try to change my ringtone. Maybe I messed something up. Thanks.
Click to expand...
Click to collapse
It removes the whole audio folder and then flashes the LP one.
Have you checked that you haven't got any sound files in your storage?
gianton said:
Yes, still use the ones from CM11.
Click to expand...
Click to collapse
Yep, now noticed difference. Nexus sounds are also included in BlissPop
Much better than CM11, especially sound when touching screen
Thanks a lot ... i love stock nexus sounds ... :highfive:
ak said:
Thanks a lot ... i love stock nexus sounds ... :highfive:
Click to expand...
Click to collapse
You're welcome mate.
Will this work on stock cm11s ROM? ?
fullmetal509 said:
Will this work on stock cm11s ROM? ?
Click to expand...
Click to collapse
mine work. anyway backup first. then flash. tq
I flashed this over [ROM][5.0.2][LOLLIPOP][BACON]RESURRECTION REMIX_lp 5.2.9[BETA] but I don't think some of the sounds got converted.
I remember on my N5 the click sounds (opening app drawer) were more of a thud, and what I'm hearing is more like a sharp (annoying) chink, I don't know how to describe a sharp sound better sorry .
I'll try to capture some video + audio and post here.
These plus your GAPPs and I've got myself a OnePlus Nexus
N-Lite Nougat for the edge plusThe basic goal of this rom is to be as light,debloated and as smooth and fast as possible.Remove unneded features etc
Compatibility: g928f,c,g,i (k and s untested)
No call audio on g928t (i know, dont bug me with it)
Features:
Android 7.0 Nougat
Security Patch 01-03-2017
Deknoxed
Extremely debloated
Zipaligned
(Partialy)Deodexed
Prerooted with magisk
Battery friendly
Bluetooth fixed
Instructions
Oh cmon you know how to flash a rom.......dont lie to me.......if ur srs tho
1.Flash the zip in twrp.
done
No need for extra bootloaders and modems or anything else.
Wiping data (specialy if you come from 6.0.1) is recomended but in theory* it should* boot.
Dont tell me about any error or if something doesnt work if you dont wipe tho.
Dont forget to install magisk manager from play store
Download links
N-Lite V4.1
Changelog:
V3:removed some more bloat.
New N920CXXU3CQC7 base
Zip size is now 1.15gb
Some other stuff i forgot
Credits:
my dog who chew the power cable while the rom was building.
Other devs whose work i included in my rom
i3 laptop mustard race
Donations always welcome
reserved
reserved 2
First
Welcome a new N rom.
I will try it for sure
downloading i tried the other nougat roms... so i will try yours nice description??
---------- Post added at 10:07 PM ---------- Previous post was at 09:50 PM ----------
rom runs smooth gear vr dont work connection error.
thanks for debloating and remove knox anything else works
gtaelbordo said:
downloading i tried the other nougat roms... so i will try yours nice description?
---------- Post added at 10:07 PM ---------- Previous post was at 09:50 PM ----------
rom runs smooth gear vr dont work connection error.
thanks for debloating and remove knox anything else works
Click to expand...
Click to collapse
Just out of curiousity have you tried using a titanium backup of Gear VR and restoring it with this rom?
kdogguk said:
Just out of curiousity have you tried using a titanium backup of Gear VR and restoring it with this rom?
Click to expand...
Click to collapse
mhm no i forgot
Oh wow rainbow_dash i never thought you would return after cm13, thx for returning with android n, im gonna check it out man , hope this one allows cts sucseed and let pgo run, also i have a question, can you add a good audio app like viper4android or arise ,as someone told me , some reported a.r.i.s.e can work but no reports on viper yet, thats all i ask of you pal,
Wesley_NL said:
Oh wow rainbow_dash i never thought you would return after cm13, thx for returning with android n, im gonna check it out man , hope this one allows cts sucseed and let pgo run, also i have a question, can you add a good audio app like viper4android or arise ,as someone told me , some reported a.r.i.s.e can work but no reports on viper yet, thats all i ask of you pal,
Click to expand...
Click to collapse
Yea im looking into making an separate addon aroma zip with those kind of mods and bloat
Basically i want to separate the users in 2 sides:
1. Those sot-freaks who want the rom as light as possible
2.Those who want the most no-compromise rom ever --and for them this addon zip im cooking up is for.
Rainbow_Dash said:
Yea im looking into making an separate addon aroma zip with those kind of mods and bloat
Basically i want to separate the users in 2 sides:
1. Those sot-freaks who want the rom as light as possible
2.Those who want the most no-compromise rom ever --and for them this addon zip im cooking up is for.
Click to expand...
Click to collapse
Ah cool, well im one that choose for light as possible, but with a few personal mods like
1. adaway, verry importand to block adds
2. viper4android or a replacer like a.r.i.s.e, bcuz i like to get more out of my headphone
3. 3minit, it's nice to have a organized taskbar
4. keybaord symbols when long press a key, fot the lazyness and easyness of typing, i noticed it wasn't in the n5 rom
5. Google play services, some apps require it, a personal alarm clock like "wake me up asuna" , i beleve it use text to speech or it won't understand spoken commands
Thats all i need sofar
Even touchwiz i don't care for since i use nova launcher, it's faster and have a key
Ofc some can be installed separately, but i don't like to play with system files to get viper to work and end up breaking it like i did with my dads lg g3
Anyway i test it in a few hours , dl is slow and its 00:00 so yeah
will work on g928i?
imfuzzyyy said:
will work on g928i?
Click to expand...
Click to collapse
It should.
If the devbase worked this should too.
Let me know how it goes
Rainbow_Dash said:
It should.
If the devbase worked this should too.
Let me know how it goes
Click to expand...
Click to collapse
Thx! BTW does it have AOD?
imfuzzyyy said:
Thx! BTW does it have AOD?
Click to expand...
Click to collapse
No. Samsung didnt release (yet) nougat sources so theres no way to port aod drivers to the kernel.
They will after nougat is officialy out
Rainbow_Dash said:
No. Samsung didnt release (yet) nougat sources so theres no way to port aod drivers to the kernel.
They will after nougat is officialy out
Click to expand...
Click to collapse
ok thank you so much
Good job!
Xposed is now available for nougat?
anthonyclass said:
Good job!
Xposed is now available for nougat?
Click to expand...
Click to collapse
No its not..... not even for nexus or cm
It works flawless on the 928f...great job...but I only get 64k antutu score...
vladcbnn said:
It works flawless on the 928f...great job...but I only get 64k antutu score...
Click to expand...
Click to collapse
You sure you came from a clean flash?(wipe)
Both me and my friend got about 84 or 85k
Rainbow_Dash said:
You sure you came from a clean flash?(wipe)
Both me and my friend got about 84 or 85k
Click to expand...
Click to collapse
Before I flashed the zip I made a factory reset (system wipe. Data wipe. Cache wipe)...and antutu crashed a couple of times... Anyway the antutu score doesn't matter so much..
---------- Post added at 03:49 AM ---------- Previous post was at 03:47 AM ----------
And.. I don't know if magisk works.. I installed the app (magisk manager) and it shows me that the device is not rooted
After trying out a lot of different sound mods and apps and patches I always came back to Viper4Android. Simple to use, great sound quality and a lot of customization.
Steps:
Flash the attached Magisk module (v4afx_v1.7.3.zip) through Magisk Manager and press volume up button twice.
After that reboot your device and enter the Viper4Android app.
Next, you need to set up the sound mod.
*I only use Viper4Android for my headphones so I will cover only that part but you could test out different settings for other audio outputs*
In the Viper4Android's menu go to UI setting and set it to expert.
Go to Headset and click Enable, I suggest you put on your headphones now so you can hear the changes in the sounds yourself and tweak them to your liking.
My settings on Redmi Note 5 Pro are:
Spectrum Extension (enabled): Strength: 0,5
FIREqualizer (enabled): Preset: Acoustic
Convolver (enabled); Impulse Response: BBE2.irs (extract the attached BBE 2.zip into Viper4Android/Kernel); Cross Channel: 30%
Dynamic System (enabled); Listening Device: High-end headphone v2; Dynamic Bass:5%
Viper Bass (enabled); Bass mode: Natural bass; Bass Frequency: 100 Hz; Bass Boost: 3,5 dB
Viper Clarity (enabled); Clarity mode:Natural; Clarity:6 dB
pavaosk said:
After trying out a lot of different sound mods and apps and patches I always came back to Viper4Arise. Simple to use, great sound quality and a lot of customization.
There are many Arise editions but I find the attached one simplest to use.
Steps:
1. Flash the attached file (ARISE Sound Systems Deuteronomy 2.2.3 Mac 'n Cheese Edition FINAL) through TWRP
2. Reboot to OS
3. Install Busybox (https://play.google.com/store/apps/details?id=ru.meefik.busybox) from Play Store
4. Open the Busybox app and install busybox
5. Enter the Viper4Arise app
Done!
Next, you need to set up the sound mod.
*I only use Viper4Arise for my headphones so I will cover only that part but you could test out different settings for other audio outputs*
In the Viper4Arise's menu go to UI setting and set it to expert.
Go to Headset and click Enable, I suggest you put on your headphones now so you can hear the changes in the sounds yourself and tweak them to your liking.
My settings on Redmi 4X are:
Spectrum Extension (enabled): Strength: 0,5
FIREqualizer (enabled): Preset: Acoustic
Convolver (enabled); Impulse Response: BBE2.irs (extract the attached BBE 2.rar into Viper4Android/Kernel); Cross Channel: 30%
Dynamic System (enabled); Listening Device: High-end headphone v2; Dynamic Bass:5%
Viper Bass (enabled); Bass mode: Natural bass; Bass Frequency: 100 Hz; Bass Boost: 3,5 dB
Viper Clarity (enabled); Clarity mode:Natural; Clarity:6 dB
Click to expand...
Click to collapse
It is telling me that I have a bad BusyBox....
I installed stericson BusyBox as they said.
Some help?
Incomtus said:
It is telling me that I have a bad BusyBox....
I installed stericson BusyBox as they said.
Some help?
Click to expand...
Click to collapse
Which rom?
pavaosk said:
Which rom?
Click to expand...
Click to collapse
ViperOs bro
Incomtus said:
ViperOs bro
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=stericson.busybox Try reinstalling busybox with this app.
pavaosk said:
https://play.google.com/store/apps/details?id=stericson.busybox Try reinstalling busybox with this app.
Click to expand...
Click to collapse
Already done! Lol
Incomtus said:
Already done! Lol
Click to expand...
Click to collapse
Have you tried installing the Viper4Andoid FX module through Magisk?
pavaosk said:
Have you tried installing the Viper4Andoid FX module through Magisk?
Click to expand...
Click to collapse
No i didn't,
i try now
---------- Post added at 09:56 PM ---------- Previous post was at 09:55 PM ----------
There are 3 different modules which do you suggest?
Incomtus said:
No i didn't,
i try now
---------- Post added at 09:56 PM ---------- Previous post was at 09:55 PM ----------
There are 3 different modules which do you suggest?
Click to expand...
Click to collapse
First one, that says only Viper4Android FX and in description says v2.2 2.5.0.5
OK i tried to install the Viper4Andoid with magisk and now i have 2 versions installed and the one installed with magisk is just craching
---------- Post added at 10:38 PM ---------- Previous post was at 10:04 PM ----------
How can i unistall the first Viper4Andoid you gave? Lol i think i give up
Ok i ve got it! I uninstalled the viper4arise you join here on the link and i installed tge one with magisk and it is ****in AMAZING i live the Convolver!! Bbe just great wonderful dor a musician like me
Incomtus said:
Ok i ve got it! I uninstalled the viper4arise you join here on the link and i installed tge one with magisk and it is ****in AMAZING i live the Convolver!! Bbe just great wonderful dor a musician like me
Click to expand...
Click to collapse
I'm glad I've helped
pls answer ...
When I try to use on MIUI 9 Global ROM ?? it's will works ???
k3rzZ said:
When I try to use on MIUI 9 Global ROM ?? it's will works ???
Click to expand...
Click to collapse
I believe it should work. You can try it yourself.
Good Job
Now I'm enjoying it even more ! thanks buddy :good::fingers-crossed:
mr Pavaosk, Sir, will it(viper4android) works on redmi 4x with base rom Mui(which is already unblock loader and rooted(magisk or super su) )? or should i flash it in the custom rom?
thank you.
bee21 said:
mr Pavaosk, Sir, will it(viper4android) works on redmi 4x with base rom Mui(which is already unblock loader and rooted(magisk or super su) )? or should i flash it in the custom rom?
thank you.
Click to expand...
Click to collapse
You can try it on MIUI I believe it should work, but even if it doesn't it won't break anything so be free to try it.
pavaosk said:
Help me please (I put this in...LOL)...
Click to expand...
Click to collapse
Hi, been trying dozens of Viper. Installs, but driver still Enabled=No. Have Viper on my rooted S5 for almost 4 years. Love it. I got a "new" 935-F using Superman Rom v2.8 7.0 with permissive Superstock Kernel. I tried your method and always wind up with the same Enabled=No on the driver.
Can you suggest something or an alternative if you get a chance?
Thanks in advance!
samccfl99 said:
Hi, been trying dozens of Viper. Installs, but driver still Enabled=No. Have Viper on my rooted S5 for almost 4 years. Love it. I got a "new" 935-F using Superman Rom v2.8 7.0 with permissive Superstock Kernel. I tried your method and always wind up with the same Enabled=No on the driver.
Can you suggest something or an alternative if you get a chance?
Thanks in advance!
Click to expand...
Click to collapse
You can try flashing these two files : http://forum.xda-developers.com/showthread.php?p=69618189
bbe.rar bad file,error while extracting pls help
Please share mods audio increase for j7p M variant oreo 8.1.0
Thanks in advance .
just simple man, visit this link and download the flashable zip thru recovery if you're rooted https://forum.xda-developers.com/android/apps-games/mod-dolby-atmos-t3109446
icodix said:
just simple man, visit this link and download the flashable zip thru recovery if you're rooted https://forum.xda-developers.com/android/apps-games/mod-dolby-atmos-t3109446
Click to expand...
Click to collapse
j
Thanks for reply but I already did a couples of days ago . Doesnt works app crashes in my oreo 8.1.0 .
I think its not supported yet. Our devs doing it already
If you are on millennium ROM or any one with Magisk, install Viper4android from the magisk library. Just download and it will install automatically.
Just make sure you have Uninstaller app to uninstall Samsung's stock sound alive; Viper won't work with Soundalive present.
Sent from my SM-G610M using Tapatalk
ultradmx135 said:
If you are on millennium ROM or any one with Magisk, install Viper4android from the magisk library. Just download and it will install automatically.
Just make sure you have Uninstaller app to uninstall Samsung's stock sound alive; Viper won't work with Soundalive present.
Click to expand...
Click to collapse
Working but there is not a big difference scout hugh volume but sound is beautiful.
NiCaARRecho said:
Working but there is not a big difference scout hugh volume but sound is beautiful.
Click to expand...
Click to collapse
Make sure it IS working, you can have "Dolby surround and pro logic" IRS; which can make sound pretty loud.
I will try attaching it, after you have it. Go to convolver, press on IRS, it should give you error of some sort, after that copy the file in the viper4android folder in the internal memory>kernel. Boom, it should be working.
PS: I can't attach the file but Google it you may find it.
OR just turn on playback gain, you can adjust it in the settings, in which it can go as far as "extreme" gain; aka the loudest.
Sent from my SM-G610M using Tapatalk
---------- Post added at 06:13 PM ---------- Previous post was at 05:53 PM ----------
NiCaARRecho said:
Working but there is not a big difference scout hugh volume but sound is beautiful.
Click to expand...
Click to collapse
Nevermind I got a link.
Here:
https://drive.google.com/folderview?id=0BzhZFIsxQQfHVGVDNzR4ZU5lbms
Sent from my SM-G610M using Tapatalk
I cant find viper4android kernel Will u guide me in system?
NiCaARRecho said:
I cant find viper4android kernel Will u guide me in system?
Click to expand...
Click to collapse
Done! Thank you bro!
For MR1 Stock Deodexed Zipalign and MR2 Deodexed
This is a stock version that is for
MR1 it's Deodexed and Zipalign with the framework mods listed
MR2 it's Deodexed with the framework mods listed
Root and Magisk compatibility.
Secure flag - Allow screenshots/screensharing in secure apps.
Signature verification - Disable signature verification allowing modification/execution of signed system apps.
Signature spoofing - Enable signature spoofing app permission.
High volume warning - Disable high volume popup dialog.
Instructions
Flash arter97 kernel for Razer Phone 2 https://forum.xda-developers.com/razer-phone-2/development/arter97-kernel-razer-phone-2-t3914996
Or
Flash f(x)THaxxorX kernel for Razer Phone 2 https://forum.xda-developers.com/razer-phone-2/development/pie-trinitykernel-edition-a1-t4046687
Enter TWRP
Wipe Dalvik / ART Cache might have to swipe for factory reset
Install ROM
Click here to download MR1 ROM
Click here to download MR2 ROM
Special Thanks
arter97 For his Kernel And TWRP
f(x)THaxxorX For his Kernel
SuperR. For his SuperR's Kitchen
Version Information
Status: Stable
Android Version 9
Created 2019-07-25
Updated 2020-02-10
Mods
Xposed
Step 1 Flash Riru Core in Magisk then reboot.
https://github.com/RikkaApps/Riru/releases
Step 2 Flash Exposed YAHFA in Magisk then reboot.
https://github.com/ElderDrivers/EdXposed/releases
Step 3 install EdXposed Installer app.
https://github.com/solohsu/XposedInstaller/releases
Reserved 2
Here they come!
I felt like a piece of **** for not thanking you for your hard work and effort. I just leeched . So sorry about that. Been running pretty smooth. However sometimes my phone won't wake up immediately. But that could be edxposed or gravity box or both altogether.
Hey, thank you for putting this together. Does it come with the stock kernel or arter97's by the way?
Also, would you consider making a odex flashable zip as well? I have SuperR’s donated kitchen as welll, but I don’t know if you had to do anything special regarding encryption or anything. If not, I will try to make an Odex zip myself.
Thank you again for your work!
jal3223 said:
Hey, thank you for putting this together. Does it come with the stock kernel or arter97's by the way?
Also, would you consider making a odex flashable zip as well? I have SuperR’s donated kitchen as welll, but I don’t know if you had to do anything special regarding encryption or anything. If not, I will try to make an Odex zip myself.
Thank you again for your work!
Click to expand...
Click to collapse
I agree Odex is just as important to free up space and optimization I only did this for easier customizing. Just unpack system.img and set option to meta then build a zip.
Is there any way you can make this rom work with substratum? So we can finally have full theming? Thanks again for your contribution.
rogeriskira said:
Is there any way you can make this cool too with with substratum? So we can finally have full theming? Thanks again for your contribution.
Click to expand...
Click to collapse
I'm working on a ROM that works with swift installer as of now.
More.
doesn't boot just sits on boot screen any help on this would be greatly appreciated
popeye2468 said:
doesn't boot just sits on boot screen any help on this would be greatly appreciated
Click to expand...
Click to collapse
Idk how you're having difficulty with the cut and dry instructions he has given. TBH if you can't figure it out you shouldn't be rooting your phone.
Trippyy Doee said:
Idk how you're having difficulty with the cut and dry instructions he has given. TBH if you can't figure it out you shouldn't be rooting your phone.
Click to expand...
Click to collapse
Chill yo. We all been there
---------- Post added at 08:22 PM ---------- Previous post was at 08:22 PM ----------
Cannot wait for the version supporting substratum! Thanks for the hard work! ?
Thank you I did actually fix it but was a little bit miffed by his comment
Warrior1988 said:
More.
Click to expand...
Click to collapse
Any chance that Ron is ready lol
Step By Step Instruction
Hey Guys, I am new to razer phone 2 ... i just got that 1 week back.
Somebody will please tell me step by step instruction how to boot this rom, Razer phone 2 is onlye device for daily use.
So just want the clear vision how to do boot this rom.
Is this rom is rooted or require root to boot this rom. Please reply me ASAP.
Thanks
popeye2468 said:
Any chance that Ron is ready lol
Click to expand...
Click to collapse
Same. I need my substratum back... Badly
xttweaponttx said:
Same. I need my substratum back... Badly
Click to expand...
Click to collapse
I have had this phone for 4 weeks said I wasn't going to do this firmware flashing this time, I lasted 3 whole days and have flashed every gsi ROM there is lol
popeye2468 said:
I have had this phone for 4 weeks said I wasn't going to do this firmware flashing this time, I lasted 3 whole days and have flashed every gsi ROM there is lol
Click to expand...
Click to collapse
Any GSI you prefer? What doesn't work?
the_brad said:
Any GSI you prefer? What doesn't work?
Click to expand...
Click to collapse
I really liked resurrection remix everything works well except Bluetooth audio, it connects but does not play any audio through device
---------- Post added at 02:57 PM ---------- Previous post was at 02:57 PM ----------
popeye2468 said:
I really liked resurrection remix everything works well except Bluetooth audio, it connects but does not play any audio through device
Click to expand...
Click to collapse
The theming aspect is very good though