Hello. Want root my device without unlock bootloader but cant because on the step where i must press vol up+power i dont have vibration. This problem have others users too.
i bought from unlocked-mobiles.com
Also want ask: how easy and pretty i can connect phone like mass storage?
Thanks !
piu4eg said:
Hello. Want root my device without unlock bootloader but cant because on the step where i must press vol up+power i dont have vibration. This problem have others users too.
i bought from unlocked-mobiles.com
Also want ask: how easy and pretty i can connect phone like mass storage?
Thanks !
Click to expand...
Click to collapse
May not vibrate, but should have a message on your screen saying something like "super user..."
I managed it on my phone :good:
RAZRi61 said:
May not vibrate, but should have a message on your screen saying something like "super user..."
I managed it on my phone :good:
Click to expand...
Click to collapse
No message. thnx.
Hi all,
I have the same problem .
I want to root my razr i (because of several notification ads) but I can't. I can't unlock the bootloader via the motorola web page ("your device does not qualify for bootloader unlocking"). So I have to use motofail2go.
Everything is fine until "trigger a bug report"... Nothing happens when I press both power and volume up buttons... So the root doesn't success.
I accepted a few days ago the update 81.5.40002.XT890.Retail.en.EU
Can you help me plz ?
Thanks :good:
My english is not perfect so if I missed something I would be happy to know what :highfive: Is there an option to activate reporting bug ?
GuiGuiGTT said:
Hi all,
I have the same problem .
I want to root my razr i (because of several notification ads) but I can't. I can't unlock the bootloader via the motorola web page ("your device does not qualify for bootloader unlocking"). So I have to use motofail2go.
Everything is fine until "trigger a bug report"... Nothing happens when I press both power and volume up buttons... So the root doesn't success.
I accepted a few days ago the update 81.5.40002.XT890.Retail.en.EU
Can you help me plz ?
Thanks :good:
My english is not perfect so if I missed something I would be happy to know what :highfive: Is there an option to activate reporting bug ?
Click to expand...
Click to collapse
They probably patched the root.
Thank you for your answer.
I tried again with motorola website. I put the same key and I didn't get any error message this time, so I was able to unlock the bootloader. And my phone is rooted now with your package. I don't understand why but it's OK now
The bug report still not working but it's not important now :good:
Thanks.:victory:
You can't root 40002 with motofail2go as far as know.
I tried it about one hour and it's definitely not possible to root the 39002 and 40002 without unlocking the BL. No one here in Germany was able to root this Updates without unlocking.
And BTW: If you're locked, DON'T try to downgrade with RSD. You will fail!
Hi,
I'm a starter developer and tested my rom. It had a binary script issue, due that the rom wasnt installed. As all of us may know, before installing rom, you should backup and wipe data, right? So, I backuped system, cache, etc. Wiped and tried the rom, it didnt install as I stated before. So I went to my computer and searched for the mistake. I turned the phone off, because I was away for some time and I thought I could boot into recovery later. So, as I found the mistake and grabbed the phone to go to recovery, it didnt get there. Got to that fastboot&rescue mode. It showed, that the bootloader was locked. But how? I have no idea. So, I can only get to the fastboot&rescue mode. Once I got all the information needed to get a new unlock code, it told me "The Huawei ID used to apply for the unlock code has not been used on the device for more than 14 days". Putting the dload folder on sd card doesnt work aswell. Any other fixes? Please help! I need to get the device running. Thanks!
Have a great day!
if you use facebook acount to login to huawei bootloader unlock site there should not be 2 weeks wait period afaik. at least mine was generated instantly.
rezmus said:
if you use facebook acount to login to huawei bootloader unlock site there should not be 2 weeks wait period afaik. at least mine was generated instantly.
Click to expand...
Click to collapse
It still has waiting time.. Thanks anyways!
Product id.
Anyone know where I could get a new product id? The current one I generated with a tool, using Y300C model. But that isnt legit, or what?
RometVinnal said:
Anyone know where I could get a new product id? The current one I generated with a tool, using Y300C model. But that isnt legit, or what?
Click to expand...
Click to collapse
Product ID is generated using 2 strings, phone model and IMEI, so it shouldn't be valid for other model name. PM me your IMEI/model and i will generate it for you.
The battery is dead now aswell.. Please help! What to do?
Ive had this problem for ages and tried everything i can think of. hopefully by now someone has experienced the same problem and solved it.
*My phone is stuck on honor boot logo
*i can access e-recovery
*i can access stock recovery
*i can access fastboot and device is recognised on my laptop
* i can wipe cache and factory reset successully and have done many times
*i can and have used the dload (3 button method) to flash stock rom successfully
Now the problem is that although i have flashed the earliest stock rom NEM-L51C432B102 it fails saying incorrect package!!!i think this is because my phone came with B103 or B104 and you can only flash from what your phone originally had and up.
I have flashed NEM-L51C432b120 and also NEM-L51C432b130 and although it says successful it reboots and remains stuck on honor boot logo!
I have entered fastboot and i can issue commands but they all fail saying REMOTE COMMAND NOT ALLOWED.
I can't use ADB because it doesn't recognise my device. Obviously ADB and FASTBOOT wont work because i can't access developper options and select enable USB debugging or OEM Unlock because the phone is stuck on honor boot logo.
Also my bootloader must be locked. I have the unlock code but i can't issue the command FASTBOOT OEM UNLOCK XXXXXXXXXXXXXXX because as mentioned before it says FAILED REMOTE COMMAND NOT ALLOWED.
I have even tried flashing rollback packages(there isnt one for NEM-L51)for other models, followed by flashing stock rom for my model device.
When i bought the phone it came with either the B103 or B104 package but after months of searching i can't find on the internet.
Is my phone a lost cause??? is it hard bricked? So i am praying that there is a guru out there who can solve this very strange problem.
Many thanks in advance.
iantechie1979 said:
Ive had this problem for ages and tried everything i can think of. hopefully by now someone has experienced the same problem and solved it.
*My phone is stuck on honor boot logo
*i can access e-recovery
*i can access stock recovery
*i can access fastboot and device is recognised on my laptop
* i can wipe cache and factory reset successully and have done many times
*i can and have used the dload (3 button method) to flash stock rom successfully
Now the problem is that although i have flashed the earliest stock rom NEM-L51C432B102 it fails saying incorrect package!!!i think this is because my phone came with B103 or B104 and you can only flash from what your phone originally had and up.
I have flashed NEM-L51C432b120 and also NEM-L51C432b130 and although it says successful it reboots and remains stuck on honor boot logo!
I have entered fastboot and i can issue commands but they all fail saying REMOTE COMMAND NOT ALLOWED.
I can't use ADB because it doesn't recognise my device. Obviously ADB and FASTBOOT wont work because i can't access developper options and select enable USB debugging or OEM Unlock because the phone is stuck on honor boot logo.
Also my bootloader must be locked. I have the unlock code but i can't issue the command FASTBOOT OEM UNLOCK XXXXXXXXXXXXXXX because as mentioned before it says FAILED REMOTE COMMAND NOT ALLOWED.
I have even tried flashing rollback packages(there isnt one for NEM-L51)for other models, followed by flashing stock rom for my model device.
When i bought the phone it came with either the B103 or B104 package but after months of searching i can't find on the internet.
Is my phone a lost cause??? is it hard bricked? So i am praying that there is a guru out there who can solve this very strange problem.
Many thanks in advance.
Click to expand...
Click to collapse
Oh well. Seriously this is the same issue my frn asked me to help. This is soo serious that we can only unbrick through update.app or else service center. Since u said dload method works but stucks device on bootlogo. U need to visit service center if under Warranty
iantechie1979 said:
When i bought the phone it came with either the B103 or B104 package but after months of searching i can't find on the internet.
Is my phone a lost cause??? is it hard bricked? So i am praying that there is a guru out there who can solve this very strange problem.
Many thanks in advance.
Click to expand...
Click to collapse
Flash these files and it should, most probably, be fine.
use dload method as given here- https://forum.xda-developers.com/showpost.php?p=73954487&postcount=240
as there are many different opinions on this method of using only update.app file but thats not true and it should be all the files.
Main file - http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1165/g104/v71812/f1/full/update.zip
Data file- http://update.hicloud.com:8180/TDS/...1812/f1/full/hw/eu/update_data_full_hw_eu.zip
Flash both the files in order. 1st file will restore your system but then you need to have 2nd file so that apps are installed and all working fine.
After 1st file, it may reboot on its own and stuck on honor logo, reboot to recovery and then do factory reset, it will be fine.
Then let it boot to set up. Dont set your phone. Shutdown and flash the 2nd file.
boot and set up.
Good luck. Please provide feedback once done. In case of further issue, let me know and will dig more into this.
Oh this is hard.
chrisleLP said:
Oh this is hard.
Click to expand...
Click to collapse
What is hard?
shashank1320 said:
What is hard?
Click to expand...
Click to collapse
This problem.
chrisleLP said:
This problem.
Click to expand...
Click to collapse
you cant follow simple instructions? you shouldnt be on this forum if youre not ready to lose data or brick your device.
Thanks for your input so far people. Much appreciated. @shashank1320 I am downloading the files you suggested and will flash them exactly according to your instructions. I will get back to you in a couple of days with the result. Fingers crossed.
gopinaidu77 said:
Oh well. Seriously this is the same issue my frn asked me to help. This is soo serious that we can only unbrick through update.app or else service center. Since u said dload method works but stucks device on bootlogo. U need to visit service center if under Warranty
Click to expand...
Click to collapse
Unfortunately my warranty has expired. The annoying thing is that if i had sent my device off six months ago when this first happened it would still be under warranty but in the UK there is only 1 service center, yes 1, and its hundreds of miles away! So i figured i could solve it myself. You live and learn.
Hey there everyone. I still havent managed to solve the issue with my device and its not through lack of trying. I have re downloaded all of the stock firmwares that you can possibly find on the internet. I also found one ive necer seen before. Its a full service repair b355. Fingers crossed, a miracle might happen and it will just boot up like when i first bought it. to begin with tho, i'm going to start with b102 and work through them b120, b130 ,b130rollback ,b350(beta), b350, b355 and then the b355 full service repair! I also got a couple of rollback packages(around 80mb) if all else fails.
I know, i'm nuts!! Finally before i admit defeat i'm going to part with £15 to buy credits for the dc-unlocker and dcPhoenx programs. From what ive read it has a good chance of solving it. I've taken soooo long before considering this option because i think its wrong that someone(s) is making loads of money from this. Why havent huawei/honor included a similar program in hi-suite. Anyway ive gone off on a tangent.
One last question though. Strangely enough i only just thought of it recently....
Is it a necessity to have your sim card in the tray as well as the sd-card????? All this time i havent had a sim in the phone as its in a crappy old one so i can still communicate with the world!!!!
Thank you to everyone for taking your time to read this. I hope a solution is possible.
iantechie1979 said:
Hey there everyone. I still havent managed to solve the issue with my device and its not through lack of trying. I have re downloaded all of the stock firmwares that you can possibly find on the internet. I also found one ive necer seen before. Its a full service repair b355. Fingers crossed, a miracle might happen and it will just boot up like when i first bought it. to begin with tho, i'm going to start with b102 and work through them b120, b130 ,b130rollback ,b350(beta), b350, b355 and then the b355 full service repair! I also got a couple of rollback packages(around 80mb) if all else fails.
I know, i'm nuts!! Finally before i admit defeat i'm going to part with £15 to buy credits for the dc-unlocker and dcPhoenx programs. From what ive read it has a good chance of solving it. I've taken soooo long before considering this option because i think its wrong that someone(s) is making loads of money from this. Why havent huawei/honor included a similar program in hi-suite. Anyway ive gone off on a tangent.
One last question though. Strangely enough i only just thought of it recently....
Is it a necessity to have your sim card in the tray as well as the sd-card????? All this time i havent had a sim in the phone as its in a crappy old one so i can still communicate with the world!!!!
Thank you to everyone for taking your time to read this. I hope a solution is possible.
Click to expand...
Click to collapse
No need of sim card in tray while using dload. Just sd card is fine. Let me go through it again and try to help before you go for 15 dollars for dc phoenix
shashank1320 said:
No need of sim card in tray while using dload. Just sd card is fine. Let me go through it again and try to help before you go for 15 dollars for dc phoenix
Click to expand...
Click to collapse
Yeah i didn't think it made any difference but its good to make sure.
i'll be waiting patiently for any golden nuggets of help you can give me.
thanks shashank1320,:fingers-crossed:
iantechie1979 said:
Yeah i didn't think it made any difference but its good to make sure.
i'll be waiting patiently for any golden nuggets of help you can give me.
thanks shashank1320,:fingers-crossed:
Click to expand...
Click to collapse
Did you flash those files i given? If not can try. Else i will have to look for other alternative
yeah i downloaded those files you had mentioned in your post and followed the instructions to the letter.
I've got a suggestion if you have tried all these above.
Can you try the following on ADB and then try to unlock OEM again.
fastboot oem relock YourUnlockCode
I've done the same and it helped, even when bootloader displayed UNLOCKED. Please try it. :good::good:
Click to expand...
Click to collapse
Click to expand...
Click to collapse
@shashank1320 Hi, i have similar problem with my NEM-L21 device... I tried to flash the Elite ROM v5.1 but i didnt succeed so i decided to restore my old rom from backup with TWRP. When i restored it it just didnt load. It was stuck on honor logo for a long time. I tried the dload method many times but nothing worked so far. I even tried unbrick it with HUAWEI Multi-tool but it also didnt worked.
Now i cant acces anything, just fastboot. I cant even turn off the device. Please can you help me somehow?
NameNotFound74 said:
@shashank1320 Hi, i have similar problem with my NEM-L21 device... I tried to flash the Elite ROM v5.1 but i didnt succeed so i decided to restore my old rom from backup with TWRP. When i restored it it just didnt load. It was stuck on honor logo for a long time. I tried the dload method many times but nothing worked so far. I even tried unbrick it with HUAWEI Multi-tool but it also didnt worked.
Now i cant acces anything, just fastboot. I cant even turn off the device. Please can you help me somehow?
Click to expand...
Click to collapse
Try unlocking the bootloader again even if it is unlocked. It will factory reset the device and it should boot fine. Have stuck on this many a time and this was the method i followed.
Hi there,
I've been searching a method to unlock Huawei’s bootloader without the Huawei’s code and with the phone locked, but I've found nothing.
I wonder if there is a method to restore the system by using a SD card and holding: volume up + volume down + power botton, because the download USB rescue mode is also locked.
I completely rule out the possibility of getting neither the huawei's code nor the access to the current system.
Any suggestions?
Thank you!
you cannot unlock the bootloader without the code from huawei (its free, so why not to do it this way).
but i don´t understand what do you want to achieve and where is your problem.
I don't have the serial number so I can't get it.
you have serial number on the box.
Dioniso said:
I don't have the serial number so I can't get it.
Click to expand...
Click to collapse
If you do not have the box, you could look in the setting menu/about phone/state.
MajaronM said:
If you do not have the box, you could look in the setting menu/about phone/state.
Click to expand...
Click to collapse
He can´t because he has no access to the device, because of ?? (stolen, found phone, lost password)
It's a second hand phone, I bought it without the original box. My brother tried to play me a prank blocking it with a PIN number and he doesn't remember the code now, any other questions/suggestions?
sell it for spare parts... or use funky huawei
Good news. My brother remembered the PIN and I could restore the system to get to the welcome menu.
I tried to follow these steps: http://www.techoxygen.com/bypass-google-account-huawei-p10-p10-plus-p9-mate-9/
But I didn't work for me, I might have an update or something that solved that vulnerability.
Thank you.
The solution I posted doesn't work anymore with the last android update (January 2018)
Here you have the solution, I worked for me. 100% unlocked:
Brand new here, looking to unlock, root and then flash a standard Android build or custom DeGoogled ROM for my new device. I was looking to find a way to unlock the bootloader to start and found that Huawei have stopped giving out unlock codes and that the info around unlocking wasn't great so I made a note of all my steps as below.
Please let me know if this works for you and if you have any issues, please also read and follow the guidelines carefully as there are lots of things like using all the applications as an administator and changing directories that are important.
I am also looking for a way to install TWRP or another recovery thing on this device so I don't brick it, as I want to root the tablet and muck around with it. Has anyone got any experience of doing this successfully and does anyone have links to methods to create a cloned backup of the standard OS?
This was done on a brand new Mediapad M3 Lite 8 (the Wifi version, not LTE) with Android 7.0, EMUI 5.1, CPN-W09, build CPN-W09C100B251 - BUT will probably work on the LTE version, the non-lite version and the 7 and 10 inch models.
IMPORTANT: This costs money and is done through the DC Unlocker tool, it costs 4 credits (4 euros/dollars) for the Mediapad M3 Lite 8 (Wifi, not LTE) as Huawei now do not offer the bootloader code AT ALL . I have copied/streamlined the steps below that were found as guides originally at the dc unlocker website, check their site guides to find originals.
Step 1 - Developer Options enable
Go to settings, about tablet, tap build number 7 times to unlock developer options
Go to developer options, enable OEM unlock, enable USB debugging
Step 2 - Enable manufacture mode
If your phone has a dialpad, enter dial pad code *#*#2846579#*#*
IF your phone doesn't have a dialpad, go to calculator and enter ()()2846579()()=
This willl take you to a developer menu, select "Project Menu", "Background settings", "USB ports settings", "Manufacture mode".
Step 3 - Install drivers
Connect your Android device to your PC with a usb cable and either install Hisuite from the connected drive that will attach, or download it from the Huawei website by searching for Huawei Hisuite and going to their official website.
To check this has worked, go to Device Manager on your PC and look for Modems - there should be an entry called Android Adapter Modem - if this is not present try disconnecting/reconnecting your device and restarting Hisuite.
Step 4 - Read bootloader code
Download the latest DC Unlocker tool from dc-unlocker dot com and extract it, then AS AN ADMINISTRATOR (right click and Run as Administrator) run the client.exe (was called dc-unlockerclient2.exe)
Click Select Manufacturer dropdown and change to Huawei Phones, not Modems, press the magnifier/search icon at bottom left and your phone info should be found. This should also
Step 5 - Buy credits from the dc unlocker site as a new user, try 4 credits first and then login with these new user details in the dc unlocker application on your PC, this will show your credits and the phone connected as well as the cost. Click the Unlocking icon on the top right and click Read botloader code to get your code. Make a note of this/copy it somewhere.
Step 6 - Go back to the folder that dc unlocker is in
Go into the unzipped folder and then copy the location of this folder by clicking on the address bar in File Explorer and copying this location, you'll have something similar to
C:\Users\ExampleUser\Downloads\dc-unlocker2client_1.00.1403
Step 7 - Turn off your phone and turn it back on holding the Vol down and Power buttons to enter fastboot mode, connect your device to your PC
Step 8 - Open cmd by searching for cmd in windows, right click cmd and open it as administrator, you'll get the black and white windows terminal
In the terminal type "cd C:\Users\ExampleUser\Downloads\dc-unlocker2client_1.00.1403" (or the path for the latest version of the dc unlocker you have downloaded) without the quotation marks and with YOUR directory path as described above. The command cd just changes directory to the one you give. Your terminal should now show the above directory as the path in which it now sends commands, i.e the > mark is now displayed after the directory path we copied
Step 9 - Type "adb devices" without quotation marks to start the adb daemon
Step 10 - Type "fastboot devices" without quotation marks and you should see a device number with the word fastboot next to it.
Step 11 - Now type "fastboot oem unlock" without the quotation marks, followed by a space and then your bootloader unlock code i.e
fastboot oem unlock XYZ123456789
Step 12 - Your device should show a screen asking you to accept the unlock, then onto another screen where you should press the power key to continue onto booting your factory reset unlocked device.
Step 13 - You might have to disconnect the USB cable and reboot your device now, and you'll set up the device from scratch again - but now the bootloader unlocked, allowing you to load stuff like TWRP if you can find the right version - which I can't right now! :good:
I have also now been able to install TWRP by using the TWRP image specifically for BAH-W09 found on page 17 of the "TWRP (greatslon mod)" in the link provided by pitapart
thread. I can't post links yet which is why I'm typing to source....
I have been trying to flash SuperSU using the latest 2.82 zip but keep getting the error "Extracting Ramdisk - Failure, aborting", which is the same error I'm getting when trying to root using SRKtool, both the 2.1 universal version and the 2.0 Huawei version, using option 1 for Mate P8 or option 6 for systemless.
I've downloaded a system root version of SuperSU (google "supersu system mode", first XDA thread) and flashed using TWRP, it says it has installed but the SuperSU app doesn't show root, and typing "su" in TWRP console doesn't show I can do commands in superuser mode. Can anyone help?
I recently have been purchased the LTE version of this device. Although I cannot try this out currently, I probably will in the future so please keep us updated about your experiments for reference!
avkjbl5bak said:
I have also now been able to install TWRP by using the TWRP image specifically for BAH-W09 found on page 17 of the "TWRP (greatslon mod)" in the link provided by pitapart
thread. I can't post links yet which is why I'm typing to source....
I have been trying to flash SuperSU using the latest 2.82 zip but keep getting the error "Extracting Ramdisk - Failure, aborting", which is the same error I'm getting when trying to root using SRKtool, both the 2.1 universal version and the 2.0 Huawei version, using option 1 for Mate P8 or option 6 for systemless.
I've downloaded a system root version of SuperSU (google "supersu system mode", first XDA thread) and flashed using TWRP, it says it has installed but the SuperSU app doesn't show root, and typing "su" in TWRP console doesn't show I can do commands in superuser mode. Can anyone help?
Click to expand...
Click to collapse
Hi,
Were you ever able to get your Mediapad M3 Lite 8 rooted? I really like this tablet but, need the 5 Ghz wifi band which requires root from everything I have read.
Thanks
howgies said:
Hi,
Were you ever able to get your Mediapad M3 Lite 8 rooted? I really like this tablet but, need the 5 Ghz wifi band which requires root from everything I have read.
Thanks
Click to expand...
Click to collapse
I have my Mediapad M3 Lite rooted by magisk.
I followed the unlock guide and unlocked the bootloader.
I couldn't find my exact firmware I downloaded the most recent one I could find.
I extracted the boot.img with Huawei Update extractor and copied it to my phone.
I download and installed latest magisk app.
I opened the magic app-> install -> install -> patch the boot image file which I then flashed through fastboot.
I then opened magisk -> install -> Direct install.
Everything works but like me you take a risk in not using the exact boot.img.
I tried and installed TWRP which worked but the volume keys would let me run the script I was trying to rebrand the phone. In the end it isn't necessary to root the phone.
sd26 said:
I followed the unlock guide and unlocked the bootloader.
I couldn't find my exact firmware I downloaded the most recent one I could find.
I extracted the boot.img with Huawei Update extractor and copied it to my phone.
Click to expand...
Click to collapse
Very bad idea and advice:
- people often uses wrong firmware or wrong version;
- a boot from a different version can be incompatible, you can be sure only too late!
The right thing is to boot to TWRP then in the console, using "dd" command do a copy of original boot!
nicolap8 said:
Very bad idea and advice:
- people often uses wrong firmware or wrong version;
- a boot from a different version can be incompatible, you can be sure only too late!
The right thing is to boot to TWRP then in the console, using "dd" command do a copy of original boot!
Click to expand...
Click to collapse
Very poor reply, you did not read my post properly, just jumped in to demonstrate your superciliousness. No advice was given and you missed the word risk. More productive use of replying would have been to include the actual command required anyway which is:
dd if=/dev/block/boot-device/by-name/boot of=boot.img
Helping wasn't the point your trying to make.
sd26 said:
Very poor reply, you did not read my post properly, just jumped in to demonstrate your superciliousness. No advice was given and you missed the word risk. More productive use of replying would have been to include the actual command required anyway which is:
dd if=/dev/block/boot-device/by-name/boot of=boot.img
Helping wasn't the point your trying to make.
Click to expand...
Click to collapse
if my reply is too poor, report it to mods...
A post like your IS an advice because people read and follow it. What is wrong is not that you write or my opinion but people behaviour
I read the "risk" word but a lot of people would not. This is also the reason I don't wrote the dd command: search and learn! Most of the messages you read here are of people who have broken their own terminal because just followed a post like your, without knowing what are doing.
N
sd26 said:
Everything works but like me you take a risk in not using the exact boot.img.
Click to expand...
Click to collapse
I see in your first screenshot the fingerprint-id menuentry is gone.... does your fingerprint-sensor working properly ?
I rooted my mediapad m3 lite 10 in the same way, but my boot-image is the right version. ( installed is BAH-W09C100B257, firmware downloaded with the huawei firmware finder app is exactly BAH-W09C100B257) . My fingerprint menuentry is gone too.....and the sensor doesnt work (with the working registered fingerprint before the rooting)
Marc
#marcg# said:
I see in your first screenshot the fingerprint-id menuentry is gone.... does your fingerprint-sensor working properly ?
I rooted my mediapad m3 lite 10 in the same way, but my boot-image is the right version. ( installed is BAH-W09C100B257, firmware downloaded with the huawei firmware finder app is exactly BAH-W09C100B257) . My fingerprint menuentry is gone too.....and the sensor doesnt work (with the working registered fingerprint before the rooting)
Marc
Click to expand...
Click to collapse
I did not have the fingerprint option activated so I checked it and found my sensor also does not work with the patched boot.img on. I could search and find the fingerprint menu entry but could not get it to operate. Reflashing the stock boot.img returned the sensor menu and fingerprint to normal but of course you lose root. More searching for solutions required.
Also I'm using the TWRP-3.2.1-bah-20180627.img recovery. The volume keys don't work so the hurupdater script I'd like to use aborts. Anyone got any other recovery for a CPN-W09C128B006?.
sd26 said:
I did not have the fingerprint option activated so I checked it and found my sensor also does not work with the patched boot.img on. I could search and find the fingerprint menu entry but could not get it to operate. Reflashing the stock boot.img returned the sensor menu and fingerprint to normal but of course you lose root. More searching for solutions required.
Also I'm using the TWRP-3.2.1-bah-20180627.img recovery. The volume keys don't work so the hurupdater script I'd like to use aborts. Anyone got any other recovery for a CPN-W09C128B006?.
Click to expand...
Click to collapse
I have
avkjbl5bak said:
Brand new here, looking to unlock, root and then flash a standard Android build or custom DeGoogled ROM for my new device. I was looking to find a way to unlock the bootloader to start and found that Huawei have stopped giving out unlock codes and that the info around unlocking wasn't great so I made a note of all my steps as below.
Please let me know if this works for you and if you have any issues, please also read and follow the guidelines carefully as there are lots of things like using all the applications as an administator and changing directories that are important.
I am also looking for a way to install TWRP or another recovery thing on this device so I don't brick it, as I want to root the tablet and muck around with it. Has anyone got any experience of doing this successfully and does anyone have links to methods to create a cloned backup of the standard OS?
This was done on a brand new Mediapad M3 Lite 8 (the Wifi version, not LTE) with Android 7.0, EMUI 5.1, CPN-W09, build CPN-W09C100B251 - BUT will probably work on the LTE version, the non-lite version and the 7 and 10 inch models.
IMPORTANT: This costs money and is done through the DC Unlocker tool, it costs 4 credits (4 euros/dollars) for the Mediapad M3 Lite 8 (Wifi, not LTE) as Huawei now do not offer the bootloader code AT ALL . I have copied/streamlined the steps below that were found as guides originally at the dc unlocker website, check their site guides to find originals.
Step 1 - Developer Options enable
Go to settings, about tablet, tap build number 7 times to unlock developer options
Go to developer options, enable OEM unlock, enable USB debugging
Step 2 - Enable manufacture mode
If your phone has a dialpad, enter dial pad code *#*#2846579#*#*
IF your phone doesn't have a dialpad, go to calculator and enter ()()2846579()()=
This willl take you to a developer menu, select "Project Menu", "Background settings", "USB ports settings", "Manufacture mode".
Step 3 - Install drivers
Connect your Android device to your PC with a usb cable and either install Hisuite from the connected drive that will attach, or download it from the Huawei website by searching for Huawei Hisuite and going to their official website.
To check this has worked, go to Device Manager on your PC and look for Modems - there should be an entry called Android Adapter Modem - if this is not present try disconnecting/reconnecting your device and restarting Hisuite.
Step 4 - Read bootloader code
Download the latest DC Unlocker tool from dc-unlocker dot com and extract it, then AS AN ADMINISTRATOR (right click and Run as Administrator) run the client.exe (was called dc-unlockerclient2.exe)
Click Select Manufacturer dropdown and change to Huawei Phones, not Modems, press the magnifier/search icon at bottom left and your phone info should be found. This should also
Step 5 - Buy credits from the dc unlocker site as a new user, try 4 credits first and then login with these new user details in the dc unlocker application on your PC, this will show your credits and the phone connected as well as the cost. Click the Unlocking icon on the top right and click Read botloader code to get your code. Make a note of this/copy it somewhere.
Step 6 - Go back to the folder that dc unlocker is in
Go into the unzipped folder and then copy the location of this folder by clicking on the address bar in File Explorer and copying this location, you'll have something similar to
C:\Users\ExampleUser\Downloads\dc-unlocker2client_1.00.1403
Step 7 - Turn off your phone and turn it back on holding the Vol down and Power buttons to enter fastboot mode, connect your device to your PC
Step 8 - Open cmd by searching for cmd in windows, right click cmd and open it as administrator, you'll get the black and white windows terminal
In the terminal type "cd C:\Users\ExampleUser\Downloads\dc-unlocker2client_1.00.1403" (or the path for the latest version of the dc unlocker you have downloaded) without the quotation marks and with YOUR directory path as described above. The command cd just changes directory to the one you give. Your terminal should now show the above directory as the path in which it now sends commands, i.e the > mark is now displayed after the directory path we copied
Step 9 - Type "adb devices" without quotation marks to start the adb daemon
Step 10 - Type "fastboot devices" without quotation marks and you should see a device number with the word fastboot next to it.
Step 11 - Now type "fastboot oem unlock" without the quotation marks, followed by a space and then your bootloader unlock code i.e
fastboot oem unlock XYZ123456789
Step 12 - Your device should show a screen asking you to accept the unlock, then onto another screen where you should press the power key to continue onto booting your factory reset unlocked device.
Step 13 - You might have to disconnect the USB cable and reboot your device now, and you'll set up the device from scratch again - but now the bootloader unlocked, allowing you to load stuff like TWRP if you can find the right version - which I can't right now! :good:
Click to expand...
Click to collapse
Did you ever get and answer to your question about cloning or getting the original factory images. I've been trying on and off for 9months. I have unlocked the bootloader and backed up using TWRP (from the 10inch model), but when I relocked the bootloader everything fell apart... unstable boot loops, etc. not sure if I had to wipe recovery I burned with TWRP or what. Also TWRP does not back-up the data partition I think due to encryption (from other posts I read). My goal was to rebrand a pile of the Chinese version tablets I have to US because we use them in our product, and the US are not available, so rebranding would give me more time before to find a replacement. Any clues would help!!!
sd26 said:
I did not have the fingerprint option activated so I checked it and found my sensor also does not work with the patched boot.img on. I could search and find the fingerprint menu entry but could not get it to operate. Reflashing the stock boot.img returned the sensor menu and fingerprint to normal but of course you lose root. More searching for solutions required.
Also I'm using the TWRP-3.2.1-bah-20180627.img recovery. The volume keys don't work so the hurupdater script I'd like to use aborts. Anyone got any other recovery for a CPN-W09C128B006?.
Click to expand...
Click to collapse
I successfully rooted my CPN-L09 without loosing fp sensor, have a look here: https://forum.xda-developers.com/mediapad-m3/help/to-patch-boot-img-magisk-v17-3-t3938629
Hi
im a new member but have been using the site for ages.
my mediapad m3 is also wifi only and im trying to get the code for the bootloader to be unlocked except for the fact that my calculator app isn't scientific enough (lol) to include brackets.
what do I do to get the code or update my calc app?
alex
bigprat9 said:
Hi
im a new member but have been using the site for ages.
my mediapad m3 is also wifi only and im trying to get the code for the bootloader to be unlocked except for the fact that my calculator app isn't scientific enough (lol) to include brackets.
what do I do to get the code or update my calc app?
alex
Click to expand...
Click to collapse
You have to use the calculator in landscape mode (turn on auto-rotate) and then the bracket buttons will appear.
So I finally got around to installing this on my stock version. I found 16GB was too limiting and I was hoping to use the SD card to expand the space so I could use it for a few more years. I purchased the code from DC_unlocker.
A couple of things I noticed while following the guide. To enter fastboot mode, holding down the volume down and power button doesn't seem to work. What you to do is while it's off, hold down the volume down button and plug in the microusb cable, while continuing to hold it down. You could also enter fastboot using an ADB command.
Also I couldn't wipe anything before installing the new roms, I got error messages. I'm not sure what that means. Anyways after installing android 9, it seemed to take a very long time to first boot. The graphic animation is going, but I wasn't sure if it was working so I hard reset once, tried to boot again and then waited again, hard reset again and put it down thinking I would have to look into the error messages and when I came back it was up and running.
Hi, I'm hoping someone can help me out here.
A few days ago, I followed the instructions unlocking the bootloader of my Mediapad M3 lite 8 (CPN-W09) and sure enough, I successfully unlocked the bootloader. However I've now run into another problem - I cannot get the FRP on the tablet to be unlocked!
Nothing I've tried seems to get it to unlock. The (only) Google account used on the tablet has been my own, and it's been no problem signing back into my account when factory resetting the tablet. One time when investigating it, after a factory reset it did say that it was "restricted" but again, adding my Google account details on the setup was no issue, but even after then deleting the account (which, if I'm right, should set FRP to "unlocked") when I enter into fastboot mode it still shows FRP as locked! And it shows it no matter what I do, wherever the Google account is "active" on the tablet or not, and the last four or five times I've did a factory reset with both data and cache partition wipes done and nothing budges. I think I'm at a lost cause here - the "OEM Unlock" option in the developer settings is totally greyed out. ?
Of course, the tablet is still "usable" but there is no way to carry out special functions after unlocking the bootloader, like rooting, install TWRP, custom ROM etc. and it just kinds of stands in a limbo.
I've tried searching here on XDA and the web in general, high and low, to see if this problem has affected anyone else, and strangely it doesn't seem to happen to anyone else!
For the record, I've also tried hardreset.info's FRP unlock tool which claimed to be successful, but it clearly wasn't!
I hope someone out there might have a solution to my woe - as I think I've partially crippled by M3 Lite 8 otherwise by trying to unlock the bootloader.
lawhec said:
Hi, I'm hoping someone can help me out here.
A few days ago, I followed the instructions unlocking the bootloader of my Mediapad M3 lite 8 (CPN-W09) and sure enough, I successfully unlocked the bootloader. However I've now run into another problem - I cannot get the FRP on the tablet to be unlocked!
Nothing I've tried seems to get it to unlock. The (only) Google account used on the tablet has been my own, and it's been no problem signing back into my account when factory resetting the tablet. One time when investigating it, after a factory reset it did say that it was "restricted" but again, adding my Google account details on the setup was no issue, but even after then deleting the account (which, if I'm right, should set FRP to "unlocked") when I enter into fastboot mode it still shows FRP as locked! And it shows it no matter what I do, wherever the Google account is "active" on the tablet or not, and the last four or five times I've did a factory reset with both data and cache partition wipes done and nothing budges. I think I'm at a lost cause here - the "OEM Unlock" option in the developer settings is totally greyed out. ?
Of course, the tablet is still "usable" but there is no way to carry out special functions after unlocking the bootloader, like rooting, install TWRP, custom ROM etc. and it just kinds of stands in a limbo.
I've tried searching here on XDA and the web in general, high and low, to see if this problem has affected anyone else, and strangely it doesn't seem to happen to anyone else!
For the record, I've also tried hardreset.info's FRP unlock tool which claimed to be successful, but it clearly wasn't!
I hope someone out there might have a solution to my woe - as I think I've partially crippled by M3 Lite 8 otherwise by trying to unlock the bootloader.
Click to expand...
Click to collapse
You could try to lock bootloader back, and before to unlock bootloader again, first just unlock OEM .
surdu_petru said:
You could try to lock bootloader back, and before to unlock bootloader again, first just unlock OEM .
Click to expand...
Click to collapse
I did try this at the time, and I couldn't get it to work. But I had another try at it yesterday and I managed to get the bootloader locked again, toggle OEM unlock to "off" and unlocked the bootloader once more and it worked!
So after doing this, I tried to get TWRP 3.3.1-1 flashed but it would stay frozen on the screen - I then read that I needed to install TWRP 3.2.0-0 first, install the August 2019 Lineage 16 firmware, then go back to the bootloader, flash TWRP 3.3.1-0, check everything was OK and then return to bootloader to finally flash TWRP 3.3.1-1. Success! I then flashed the latest Lineage OS 17.1 firmware along with Open Gapps (ARM64, Android 10, nano) and so far everything has worked OK. I just need to download all my apps again, but I'm sure it will give my CPN-W09 a new lease of life!
I used to do some rooting previously with Android handsets in the past, but the last time was two years ago (rooting & upgrading an Alcatel handset to Android 6.0) and FRP was new to me, throwing me off.
I've donated some Euros to you as an appreciation for your work & advice. Merci beaucoup!
lawhec said:
I did try this at the time, and I couldn't get it to work. But I had another try at it yesterday and I managed to get the bootloader locked again, toggle OEM unlock to "off" and unlocked the bootloader once more and it worked!
So after doing this, I tried to get TWRP 3.3.1-1 flashed but it would stay frozen on the screen - I then read that I needed to install TWRP 3.2.0-0 first, install the August 2019 Lineage 16 firmware, then go back to the bootloader, flash TWRP 3.3.1-0, check everything was OK and then return to bootloader to finally flash TWRP 3.3.1-1. Success! I then flashed the latest Lineage OS 17.1 firmware along with Open Gapps (ARM64, Android 10, nano) and so far everything has worked OK. I just need to download all my apps again, but I'm sure it will give my CPN-W09 a new lease of life!
I used to do some rooting previously with Android handsets in the past, but the last time was two years ago (rooting & upgrading an Alcatel handset to Android 6.0) and FRP was new to me, throwing me off.
I've donated some Euros to you as an appreciation for your work & advice. Merci beaucoup!
Click to expand...
Click to collapse
Thank you very much too
Hello
I followed the steps here to unlock the bootloader with my btv-dl09, that worked fine even its not lite.. :fingers-crossed:
but now, any clues? may i ll try the way of lawhec with
lawhec said:
So after doing this, I tried to get TWRP 3.3.1-1 flashed but it would stay frozen on the screen - I then read that I needed to install TWRP 3.2.0-0 first, install the August 2019 Lineage 16 firmware, then go back to the bootloader, flash TWRP 3.3.1-0, check everything was OK and then return to bootloader to finally flash TWRP 3.3.1-1. Success! I then flashed the latest Lineage OS 17.1 firmware along with Open Gapps (ARM64, Android 10, nano) and so far everything has worked OK. I just need to download all my apps again, but I'm sure it will give my CPN-W09 a new lease of life!
Click to expand...
Click to collapse
but cant find the TWRP 3.3.1-1?
may u Mean
[Recovery][Official] TWRP 3.3.1-10 [G97*0][Snap][3.Jan.20]
[Recovery][Official] TWRP 3.3.1-12 Snapdragon [N97x0][10.Nov.19]
[RECOVERY][ROOT]TWRP 3.3.1-1 Galaxy J6+/J610F/FN/G/DS
???
if so, why u choose one of these? No Clue for me^^ plz let me know
greetz
ADD: just found
Developed By :letschky
twrp-3.1.1-1-next.img
Jul 13, 2017 | 03:32PM
maybe these? looks pretty old but still working? Oo