Mt g920t was on rooted firmware 5.1.1 and i decided to unroot it to play pokemon go ( funny i know), i flashed it with stock firmware 5.1.1 but after the flash the phone was stuck on samsung logo and so i decided to flash it again to 6.0.1 . After the flash the phone restarted and went into recovery mode and on the bottom of recovery mode it says dm-verity verification failed , need to check DRK first.
I have wiped cache and also done factory from recovery but still nothing. when i go in download mode it says my FRP lock is off.
Everytime i turn on the phone or plug in the charger the phones goes into recovery mode.
Any help will be appreciated.
Related
So I was using my phone with android 5.0 and root and I went to update superuser after doing that I went to reboot my device and after that I could not turn on my phone it just got stuck on bootloader unlocked how can I fix this as I can still access fastboot and PhilZ Touch 6 I just want to fix it and not have to restart my phone as I have a lot of data in apps that cannot be saved if my phone is reset and I cannot back them up to save the data either
Flash latest supersu.
flash stock rom then do it again.
I recently got a new ATT galaxy s5 (G900A). Upon setting it up, I used OTA to take it from stock to the latest version which was 5.1.1 I believe.
I then failed to do thorough research and attempted to downgrade it to 4.4.2 which started causing problems.
I retracted my actions in chronological order to help in troubleshooting this situation:
Upgraded via OTA to 5.1.1
used odin 3.10.7 in AP mode with file "AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5"
Odin reported a failure after a few moments of me pressing the "start" button. for the above AP file. On the phone's screen (whilst in download mode) , it showed the progress bar as not being completed and also not progressing after Odin Failed. I had to pull battery to restart the phone.
restarted phone and it threw a splash screen saying to use kies recovery due to a firmware error.
entered download mode, used odin in AP mode to flash "G900A_OC4_Stock_Partitions.tar.md5"
phone rebooted and hung on Samsung Galaxy S5 logo
entered recovery mode (vol up, home, power) to reset the cache, still hung up on samsung logo
entered recovery mode again to do factory reset/wipe, still hung on samsung logo
pulled battery, used odin in AP mode to flash file "G900A_OC4_Stock_Kernel.tar.md5"
phone rebooted and hung on Samsung Galaxy S5 logo
I did quite a bit of searching around and have employed a few attempts at fixing the issue as listed above. I am still hanging on the Samsung logo though.
Could anyone offer me some insight on how to go about resolving this situation?
Thanks for your time!
guy2020 said:
I recently got a new ATT galaxy s5 (G900A). Upon setting it up, I used OTA to take it from stock to the latest version which was 5.1.1 I believe.
I then failed to do thorough research and attempted to downgrade it to 4.4.2 which started causing problems.
I retracted my actions in chronological order to help in troubleshooting this situation:
Upgraded via OTA to 5.1.1
used odin 3.10.7 in AP mode with file "AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5"
Odin reported a failure after a few moments of me pressing the "start" button. for the above AP file. On the phone's screen (whilst in download mode) , it showed the progress bar as not being completed and also not progressing after Odin Failed. I had to pull battery to restart the phone.
restarted phone and it threw a splash screen saying to use kies recovery due to a firmware error.
entered download mode, used odin in AP mode to flash "G900A_OC4_Stock_Partitions.tar.md5"
phone rebooted and hung on Samsung Galaxy S5 logo
entered recovery mode (vol up, home, power) to reset the cache, still hung up on samsung logo
entered recovery mode again to do factory reset/wipe, still hung on samsung logo
pulled battery, used odin in AP mode to flash file "G900A_OC4_Stock_Kernel.tar.md5"
phone rebooted and hung on Samsung Galaxy S5 logo
I did quite a bit of searching around and have employed a few attempts at fixing the issue as listed above. I am still hanging on the Samsung logo though.
Could anyone offer me some insight on how to go about resolving this situation?
Thanks for your time!
Click to expand...
Click to collapse
Same problem here. Really need a solution
Jsorren said:
Same problem here. Really need a solution
Click to expand...
Click to collapse
Totally ran into exactly the same issue...I am trying to sort out the details of it today and will post up what I find...I believe the answer lies somewhere in getting back to stock OF3 firmware + OF3 kernel without root via ODIN .tar file but we shall see. Also ..I am currently running ODIN v3.09
Get the phone up and running
Ok this is what I did to get my phone back up and running,
What happened was I did what it said on the downgrade thread here on xda, it didn't work. But of course it left my phone stuck on download mode.
I used a program from z3x to download the pit file, that usually takes it out of download mode. Then I booted into recovery, I had the 4.2 recovery on a 5.0 rom.
So I was stuck un bootloop, but there is a way to get it out.
downloaded the update and sent it with adb sideload.
so in other words
things you need
1. easy adb http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
2. update file for S5, from my google drive http://*******/1TjDwb
Steps I took
1. go to recovery mode by booting with volume up + home + power
2. select apply update from adb
3. install easy adb http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
4. go into any command shell ( cmd or windows powershell) and send the file by adb
in my case it was "adb sideload 2400258.cfg"
5. wait for the phone to apply the update and restart.
I have a long browsing history (about 7 devices and various browsers), I don't really have time to look up the thread I got the update from.
Hi everyone,
I've had numerous problems with OTA updates with my AT&T SM-G900A since I got it. I'm not in the US anymore and my phone was unlocked, so I thought "hey, how hard could it be" and tried to flash it.
I used the following binaries that were posted here a couple of days ago: http://forum.xda-developers.com/att-galaxy-s5/general/g900aucs4cpa2-odin-files-em-hot-t3372388
I ran them through Odin3 3.09, and got a PASS - but the phone is stuck at the boot logo screen ("Samsung Galaxy S5 Powered by Android" screen).
Download mode still works, but normal booting, recovery booting and safe mode do not.
Any suggestions on what I could do?
EDIT: I used the stock image located here: http://forum.xda-developers.com/showthread.php?t=2714455 to reflash it using Odin again. It seems to have worked, though all sorts of apps were crashing. I've just done a factory reset and am in the process of restoring it, but it seems promising for now. Never trying to update AT&T crap again.
Hey man, are you still having troubles? I just rooted my Sm-G900A, and then decided to use Odin to flash it with the 5.1.1 files. So this is what happened to me:
1: Flashed AP with the 5.1.1 file, passed but stuck at the Samsung Logo- Powered by Android.
2: rebooted into download mode and flashed "BL" or Bootloader with the 5.1.1 file and I got passed that screen. Now I'm waiting for it to optimize my apps.
My guess is after we flash the AP file we then have to flash the bootloader as well. So if you haven't tried that I'd suggest it to see what happens.
My phone suddenly stopped working and after a reboot i got stuck at the unlocked bootloader screen . It says to press the power button to boot but nothing happens. So I flashed stock firmware using odin v3 but the same issue. I tried fixing the partitions in twrp recovery but it gives me an error saying "Failed to mount metadata - invalid argument".
So lastly I used Odin PIT flash with rewrite partition but it still stuck at warning screen I only able to access Recovery mode and download mode .
Does anyone have a solution ? Please help
rajhridoy said:
My phone suddenly stopped working and after a reboot i got stuck at the unlocked bootloader screen . It says to press the power button to boot but nothing happens. So I flashed stock firmware using odin v3 but the same issue. I tried fixing the partitions in twrp recovery but it gives me an error saying "Failed to mount metadata - invalid argument".
So lastly I used Odin PIT flash with rewrite partition but it still stuck at warning screen I only able to access Recovery mode and download mode .
Does anyone have a solution ? Please help
Click to expand...
Click to collapse
Device exact model? some details might help the Devs find the solution. Is Custom ROM installed etc.?
Hi,
so I rooted my Samsung Note 9 successfully and used it for over 6 months, and for some reason I wanted to unroot the device, I uninstalled Magisk and then unchecked the OEM unlocking, it asked me to completely factory reset the device, I proceeded after verifying my Samsung Account, now my phone won't boot and it says 'Custom binary blocked by FRP lock". So I thought I have to Flash the Stock ROM on it and it will work but now my phone is not going into Odin Mode, I have tried all the button combinations. Important to note here is that upon pressing the power button the phone is not showing the Samsung logo (powered by android) thing either. Please help me with what should I do to install the stock ROM.
Thanks