Database Develop

MEGA-THREAD ALE-L21, ALE-L23, ALE-L02, Converting, Root, Unbrick, Updating, Xposed

EVERYTHING YOU NEED TO RESTORE/UPGRADE THE HUAWEI P8 LITE​So i'm making this thread because i noticed many of you had some trouble with your devices. Here you're gonna learn what you can do with your device. Every chapter is something that you can do without the need of the previous chapters (unless told otherwise). I'm also gonna explain what happens to your device (in a simple way so you don't get confused).
WARNING: THIS THREAD IS TOWARDS ALE-L21, ALE-L23, ALE-L02 USERS. IF YOUR MODELNUMBER IS ALE-L04 YOU CAN'T USE ANY OF THE FILES IN HERE.
ALSO I'M NOT RESPONSIBLE FOR SCREWING UP YOUR PHONE, Kevin is.
Note: It will work on the Ale-L02 and the Ale-L23 but you have to settle with some functions that don't work.
Comparison for the modelnumbers ALE-L21, ALE-L23 and ALE-L02​
The Chapters:
1. Tools and prepping.
2. Unlock Bootloader.
3. Bootloop/Softbrick.
4. Unbricking.
5. Dual and single sim converting.
6. Upgrading to Marshmallow.
7. Installing TWRP.
8. Getting root.
9. Install Xposed framework.
10. Multiuser account.
11. After word.
Now take your kids and lock them in your basement and put your wife in the kitchen because you're going to learn some stuff and you will get hungry.
Note: If you're a woman take your neighbours wife to make you sandwiches.
Chapter 1: Tools and prepping.
What you need:
Drivers for our phone (Hisuite).
Minimal ADB and Fastboot.
Usb debugging enabled on your phone.
How:
Download and install Hisuite on your pc
Connect your device to your pc and let hisuite detect it.
Close Hisuite.
Download and install Minimal ADB and Fastboot on you pc.
Go to "Settings -> About phone" .
Tap several times on "Buildnumber" until a toast shows where it says "you're now a developer".
Go to settings -> developer options.
And there you will see usb-debugging.
Turn it on.
Congratz on doing this.
Chapter 2: Unlock Bootloader.
WARNING THIS WILL VOID YOUR WARRANTY.
But it doesn't matter. if your phone boots and all the hardware works, everything is fine. The software is something we can fix.​
What you need:
This site.
Unlock code(you will get it on the site).
Minimal ADB and Fastboot (see chapter 1).
How:
Just go to the site.
Make a profile.
Wait 14 days.
Fill in their form .
Get a 16 digits code.
Save that code.
Connect your device to your pc.
Open a cmd.
Type this:
Code:
adb devices
It should return a permission request on your phone just accept it.
After that you should see something like this on your computer
Code:
List of devices attached
WXXXXXXXXXXXXX device
That's perfect and you're a good boy or girl or Apache Attack Helicopter.
If it doesn't you're doing it wrong. "STOP KEVIN!!! THAT'S WRONG KEVIN!!! DAMMIT KEVIN!!!"
After that type this
Code:
adb reboot bootloader
Your device will restart into a white screen with the Android puppet (wich name is Andy btw) on it. Beneath Andy it will say "PHONE locked" in green. But not for long .
Wait until Windows installs the drivers.
Remember the 16 digits you got from Huawei?
Yeah whe're gonna need them here.
Next you enter this
Code:
[COLOR="Magenta"]PINK FLUFFY UNICORNS DANCING ON[/COLOR] [COLOR="Red"]R[/COLOR][COLOR="Orange"]A[/COLOR][COLOR="Yellow"]I[/COLOR][COLOR="Green"]N[/COLOR][COLOR="Blue"]B[/COLOR][COLOR="Indigo"]O[/COLOR][COLOR="Violet"]W[/COLOR][COLOR="Red"]S[/COLOR]
No wait, that's wrong. I'm sorry.
This
Code:
fastboot oem unlock xxxxxxxxxxxxx
Where you replace the xxxxxxxxxxx with the 16 digits you got from Huawei.
Now your bootloader screen should say "PHONE unlocked" in red.To be sure you can run this command.
Code:
fastboot oem get-bootinfo
If it returns something like this.
Code:
...
(bootloader) unlocked
OKAY [ -0.000s]
finished. total time: -0.000s
Your good. And your bootloader is unlocked.
Now just reboot with this command.
Code:
fastboot reboot
Congratz, you bootloader is unlocked and your warranty just went down the drain where it shall remain for the rest of its days.
Chapter 3: Bootloop/Softbrick.
Imagine a world where everything went perfect... that would suck, would'nt it? Sometimes our device wont start. This is what we call a "Bricked" Phone. We have 2 kind of bricks. If you encounter them you will sh!t bricks.
No serious... you will!!!
If your phone is bricked we check if we can still charge it and/or try to get something on the screen. If you can't then you have what we called a hard brick and there's nothing we can do about it. "GET OVER IT KEVIN!!!"
The chances are you brokes something.
If we can then HOORA!!! The chance is great whe can restore it. This is what we call a soft brick or a bootloop (for all you smartypants out there. yeah, a bootloop is when you get stuck on your bootlogo/animation).
Chapter 4: Unbricking.
It's very simple we try to push a new image into your phone trough an unlocked bootloader with fastboot (some other devices use special methods, we don't). So make sure your bootloader is unlocked.
Here is an example
Code:
fastboot flash boot boot.img
What happens here is this:
The fastboot calls the fastboot program.
The flash says fastboot i want you to do this.
The boot says on that location on the device that is connected.
The boot.img says with that file.
So for example:
"Hey fastboot you have to flash the recovery partition with the recovery.img".
Becomes:
Code:
fastboot flash recovery recovery.img
We get these "images" with the Huawei update extractor from official updates in the form of UPDATE.APP.
Most of the times we flash 4 images and in this order.
boot.img
recovery.img
cust.img
system.img
So open your cmd in the same folder as the .img files (or put the .img files in the fastboot folder). Connect your phone trough to your pc and press power while holding the volume down button (it will show the bootloader).
And then type this.
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
fastboot flash system system.img
After that just reboot and wait. It can take a long time for the first boot. Now thankfully there are some people, who made scripts for us lazy bastards so we just have to click and be lazy.
What you need:
The unbrick files for the Dual sim.
The unbrick files for the Single sim.
How:
Connect your device in fastboot and press the "flash all" file.
Let the script run.
The first time you're gonna boot you will have no imei's so your device wil register no sim. Just update your damn phone and everything will be fine.
Note: For the people with an Ale-L04. Just replace the .img files in the folder with the files from your stock recovery.
Chapter 5: Dual and single sim converting.
So you want to convert to a single/dual sim? Well good for you.
What you need:
Unlocked bootloader (see chapter 2).
Unbrick files for Dual sim or Single sim (see chapter 4).
Vendor files for Dual sim or Single sim.
Optional:
Dual sim b170 manual update.
Single sim b133 manual update.
How:
If you want to go to dual sim just download the files for dual sim unbricking otherwise download the single sim unbricking software.
Extract them.
Run them.
And here comes the trouble.
After doing this you will notice a few things:
You will notice that none of your sim's is detected.
You will notice you can't upgrade.
And You will notice that it didn't change anything (you don't see the the appereance/dissapreance of the dual sim settings).
At this point you probaly thinking i screwed up and you want to find me, come to my house and kill me slowly in some creepy basement where i shall remain in pain for the rest of my miserable short life. Well... That's to bad for you because i'm not gonna tell you that my name and address is P sherman, 42 Wallaby Way in Sydney.
Ok, so what the F happend to your phone?
1. Your sim detection.
This occurs when you downgrade from Android Marshmallow to Android Lollipop.
It's nothing to worry about. You just lost your Imei and that's the reason your phone won't detect your sim.
It will solve itself once you update.
2. You can't update.
This is a part of the Famous Balong bug.
what happend is, the phone got confused and just spit out some random build (there's a lot more to that but this sums it up). You can detect this bug by going into "settings -> about phone" and check the build number. If you see the word "Balong" in there, congrats, you are a proud owner of the Balong bug.
How to take care of the Balong bug?
Make sure that you walk it 3 times a day.
It also does sleep a lot so don't worry about that.
Please don't be like other people wo just dump it in the woods somewhere.
Be a responsible Balong bug owner.
No seriously. If you have the Balong bug just install the vendor file according your software.
Extract the file.
You will get a folder named "dload" that contains an "UPDATE.APP" file.
Put the folder with the file in it on your sd card or internal memory.
Go to "Settings -> Update".
Press the menu (at the bottom you will see 3 lines, that's the menu).
Choose "Local update".
Select "UPDATE.APP".
Press "Install".
After the install you should be able to upgrade to a higher build. If it doesn't (single sim i had some problems). You have to upgrade manually to the next build.
Same procedure, extract -> put in "dload" folder and manually update. Make sure you delete the vendor file first.
Now you're converted and can update your phone to the latest build from Lollipop trough Updater (OTA). You will also notice that your Imei has returnd and you wil notice the appereance/dissapreance of the dual sim settings.
Chapter 6: Upgrading to Marshmallow.
The upgrade to Android 6.0 doesn't go trough OTA.
You will have to do it manually.
But first... Let your wife make you a sandwich. You should be hungry by now.
It's done? You ate well? Ok then, let's do this.
What you need:
Dual sim b560 build.
Single sim b551 build.
How:
First check that you're build is B170 or higher (dual sim) or B171 or higher (single sim).
If not upgrade first trough OTA or local update.
Extract the file.
You will get a folder named "dload" that contains an "UPDATE.APP" file.
Put the folder with the file in it on your sd card or internal memory.
Go to "Settings -> Update".
Press the menu (at the bottom you will see 3 lines, that's the menu).
Choose "Local update".
Select "UPDATE.APP".
Press "Install".
Some builds are simlocked and wont upgrade.
Just follow the Unbricking chapter and start from there.
After this you can get the next update trough OTA.
Note:Whenever you update trough OTA or local (flashing is'nt updating.) Make sure you don't have root, TWRP or another custom recovery installed. Everything should be stock.
Chapter 7: Installing TWRP.
Congratz you've made it this far. At this point whe're gonna install TWRP.
Now? you ask, What does TWRP do and what does it stand for?
TWRP stand short for Team Win Recovery Project. It's an open-source software custom recovery image for Android devices. It provides a touchscreen interface which allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images.
Soooooooowwwww... can you just install TWRP on any device?
NO. TWRP has to be modified to your current chipset in order to work on your device. The provided image we gonna install is TWRP 3.0.2 wich is specially build for our device. Ale-L04, NOT FOR YOU GUYS!!!
What you need:
TWRP 3.0.2 with script.
Unlocked bootloader (see chapter 2).
Usb-debugging enabled (see chapter 1).
How:
Extract the folder from TWRP.
Connect your device.
Just open the Install file and read what's happening on your screen. After it's done you can boot into TWRP by holding the volume down and the volume up button at the same time while powering up your phone. The principle is the same as described in chapter bootloop/softbrick. We just flashed trough fastboot the twrp.img .
If you installed TWRP you can't update trough local or OTA anymore. You first have to flash back the original recovery. You can get them by running Huawei update extractor on your current build UPDATE.APP that you download from the Huawai site and flash them trough fastboot
Code:
fastboot flash recovery recovery.img
Note:It doesn't matter wich build you're on.
Chapter 8: Getting root.
So it has come to this. The most famous feature on Android. The almighty ROOT.
Device manufacturers don't want us to get root because the most of us would screw up the device. So if we gain root acces our warranty is void. But we can restore our warranty with unrooting. Altough if your bootloader is unlocked it's unlikely.
Not that you have anything on your warranty... like, remember that time that you took your phone out of your pocket when it rained? Yeeeeaaaaah, if you send it back they will say it's waterdamage. For warranty on your software it's simple. With root acces, TWRP and the knowledge of XDA we can probarly fix the software issue before they even realize there's an issue.
"Throw your phone against a wall, exactly at 50 M/ph that will solve the problem. Be carefull, because 49 M/ph is not fast enough and 51 M/ph will break your phone." -XDA ​
Click to expand...
Click to collapse
Please don't try this, this is not a real solution!​
So go for the root and f*ck the warranty.
Just be sure that your device boots up and all buttons work before doing anything to it.
DON'T (and i can't stress this enough!!!) ROOT YOUR PHONE WITH KINGROOT!!!​You will get root but it also screws up a lot.​
For Android 5.0/5.1 Lollipop based
What you need:
Unlocked bootloader (see chapter 2).
Usb debugging active (see chapter 1).
Root file.
How:
Connect you phone to your pc.
Extract the "root P8 file".
Open the "root P8 file".
Follow the instruction on your computer screen.
Your phone is now rooted.
Note: Unroot first with the SuperSu app before trying to upgrade to a newer build.
For Android 6.0 Marshmallow based
What you need:
Unlocked bootloader (see chapter 2).
TWRP installed (see chapter 7).
1.Zip .
2.Zip .
How:
Put 1.zip and 2.zip into your sd card/internal storage.
Boot into TWRP.
Ignore the message from TWRP.
Choose the "install" button.
Locate 1.zip (if on sd card go "up a level" and then "external sdcard" there you should find it).
Install it.
Reboot your phone.
Boot into TWRP again.
Locate 2.zip .
Install it.
Reboot
Your phone is now rooted. But your SuperSu app is still a user app.
If you want to make it into a system app here's how to do it.
What you need:
A root explorer (Es File Explorer).
How:
Go to /data/app folder.
Locate the eu.chainfire.supersu-1 folder and cut it.
Go to the /system/app folder.
Paste it.
Give it these permissions rwx r-x r-x.
Reboot your phone.
After you got root you can delete systemapps that you don't want/need or change a lot of things in your phone.
Chapter 9: Install Xposed framework.
Xposed installer is awesome. it's like a google play store for tweaks than can make your android device just right like you wanted it to.
Note:this version won't need an build.prop edit.
What you need:
Android 6.0 installed (see chapter 6).
TWRP installed (see chapter 7).
Root (see chapter 8).
Install from unknown sources enabled.
Xposed installer.apk.
Xposed installer framework zip.
Optional :
Xposed uninstaller zip.
How:
Enable unkown sources "Settings -> Advanced Settings -> Security -> Unknown sources".
Put the Xposed installer.apk on to your device.
Install the Xposed installer.apk onto your device.
Put the Xposed installer framework zip and the Xposed uninstaller zip into your sd card/internal memory.
Reboot into TWRP.
Install Xposed installer framework zip.
Reboot.
Wait for an hour before deciding that it's bricked. Seriously this will take long like 20 minutes up to 40.
If it's bricked just boot into TWRP again and install the Xposed uninstaller zip. It should work. Otherwise -> unbrick it (see chapter unbrick).
If you have succesfully installed it go to the Xposed installer app and click on "Framework". If it says "Xposed framework version 85.10 is active" in green everything is a gogo.
Chapter 10: Multiuser account.
As you know Huawei did a heavy job theming Android with it's Emui overlay. As so we don't have all the stock features that Android gave us. Here's how to get one back.
What you need:
Root (see chapter 8).
Build prop editor.
How:
Open your build.prop editor.
Locate it to /system/build.prop.
Search for these lines.
Code:
fw.show_multiuserui=0
fw.max_users=1
Change their value into this
Code:
fw.show_multiuserui=1
fw.max_users=3
Save your build.prop (grant your editor root acces).
Reboot your phone.
Then go to "Settings".
There you will see "Users".
Chapter 11: Afterword.
If you're new on XDA remember that the people here do anything in their free time. Be it helping, developing or just testing. Be nice to them and don't spam those people. they may now alot but everything they know is already explained somewhere on XDA and explaining the same thing 1000 times a day is frustrating.
So do a search before asking anything AND READ THE WHOLE THREAD!!! We lost the only 2 developers we had in the P8 lite section this way.
Also if someone helped you press the ":good: Thanks!" button on the right bottom of his/her post. to show your appreciation. The files i enclosed are files that i gatherd over the time at the P8 lite thread or from the Huawei website. I don't remember who made them all but it wasn't me.
Give this guy a thanks @sokkoban for his awesome development on the p8-lite and his site. It learned me a lot about my device. i think most of the files are his. don't know for sure (check out his multitool here). And give this guy @shimp208 a thanks for his awesome work on the Minimal ADB and Fastboot installler and his awesome thread.
Note:for the more advanced people in here who know what they're doing. I know that there are easier ways to do some stuff but i want the people to learn. If you have suggestions, let me know.

I'm in progress of taking control over the world. So i'm not active on this thread anymore. Further questions will be answered by people like @amageek. Give them a thanx for their trouble and send amageek goats, virgins and peanutbutter (he likes that).
Also... Geeky, you will be minister of education in my new world order.

congrats for you amazing tutorial,, i have a question, imagine if my mind turns crazy and i want to lock the boootloader? how can i do?

pl4t!n said:
congrats for you amazing tutorial,, i have a question, imagine if my mind turns crazy and i want to lock the boootloader? how can i do?
Click to expand...
Click to collapse
simple
do the same steps as unlocking but just put in
Code:
fastboot oem relock YOUR CODE
it will say relock and not locked
 @pl4t!n little update

Thanks for this tutorial, hopefully this will help many.

riaanck said:
Thanks for this tutorial, hopefully this will help many.
Click to expand...
Click to collapse
I hope so to. i got tired of typing out the same solution 30 times a day now i just have to share a link

Finally
I am very happy because it sets a new developer on the horizon who can explain absolutely correctly and peaceful. Keep the good work bro!
Now moderators should delete 90% of the subjects they are unnecessary, repetitive and full of crap! It is time for this forum to begin to moderate

sokkoban said:
I am very happy because it sets a new developer on the horizon who can explain absolutely correctly and peaceful. Keep the good work bro!
Now moderators should delete 90% of the subjects they are unnecessary, repetitive and full of crap! It is time for this forum to begin to moderate
Click to expand...
Click to collapse
Thx i will do that.
yeah the moderators don't do a lot of work here. there are questions in the general. post's that are the the same... and crap like that. i will try to contact them.

lordy, many many thanks man... nice post... all in one... very much appreciated...

amageek said:
lordy, many many thanks man... nice post... all in one... very much appreciated...
Click to expand...
Click to collapse
Done with typing everything a 1000 times
it was necceserry.
gonna try to update it but...

hi, i f***** my phone with king root. and now o cant uninstall it or unroot. can help me?

Holographik said:
hi, i f***** my phone with king root. and now o cant uninstall it or unroot. can help me?
Click to expand...
Click to collapse
You can use supersu me app or delete the app with a root deleter than start with the bootloader unlocking. Yes, you probarly unlocked it with king root. No, it didn't work.
Good luck dennis, i hope u can fix it

Thumbs up!
Thanks a lot for this useful guide! Finally it's all there together in one place, with good explanations. Just used it to install TWRP and root my device, worked flawlessly!
Edit: now we just need to wait for a nice custom ROM with stock android experience, without the EMUI shell we're stuck with..

THANKS a lot dude, i removed kinguser.
now i want just to update to android 6.0
what i need to unlock/do.

Holographik said:
THANKS a lot dude, i removed kinguser.
now i want just to update to android 6.0
what i need to unlock/do.
Click to expand...
Click to collapse
Just start reading the thread. And pick in where your phone will let you.

wouterbeer said:
Thanks a lot for this useful guide! Finally it's all there together in one place, with good explanations. Just used it to install TWRP and root my device, worked flawlessly!
Edit: now we just need to wait for a nice custom ROM with stock android experience, without the EMUI shell we're stuck with..
Click to expand...
Click to collapse
Their working on it

and what i need to unlock for android 6.0? im a little stupid with huawei
or just put in dload folder the update.app or what is and flash with both buttons and power button?

Holographik said:
and what i need to unlock for android 6.0? im a little stupid with huawei
or just put in dload folder the update.app or what is and flash with both buttons and power button?
Click to expand...
Click to collapse
Chapter 6 everything is explained there. Sorry for the short answers but not much time now

Would it be possible to add some original files or just the rom in case anyone would f*ck things up.

Very good summary!

Huawei P8 Lite Unlock Bootloader, Convert L23 In L21, Upgrade To Android 6 Official +

# SUPPORT HUAWEI P8 LITE
Huawei P8 Lite Unlock Bootloader, Convert L23 In L21, Upgrade To Android 6 Official + Install Custom Roms, Recoverys, Rootear, And Many Many Things - April 27, 2017 Updated.
IMPORTANT! This Tutorial describes the steps and order needed to Update the Huawei P8 Lite L23 or L21 to a newer version of Android. Everything in a single tutorial so that they are not looking for each step separately, It is explained as practical as possible, even if they do not do it well. Re-read and try it as many times as necessary or ask if they can not, if not As they go for a beer and tacos, they relax and try again later.
If you do not feel ready or deplaned you do not have the slightest idea of ​​what is posed in this tutorial better leave your cell phone like this, if you have your cell phone you use for the necessary so leave it, dedicate yourself to investigate terms that you do not understand Even, do not try to "run without first learning to walk", you are not going to return Millionaire, nor are you going to become more handsome, strong, nor will you be the most intelligent or interesting, nor will you return immortal solo by Update your phone to Android 6 , So be patient, be aware and do not accelerate. At the moment you decide to continue with this Tutorial, you become absolutely responsible for what happens with your Mobile and your actions. Please proceed with caution and do not play chingon.
HERE THE ODYSEA BEGINS!
<<< UNLOCK BOOTLOADER >>>
IMPORTANT:
To know the Model Number & IMEI:
Enter Settings> About Phone.
To Know the Serial Number:
Enter Settings> About Phone> Status
To Know Product ID:
Enter this code: "* # * # 1357946 # * # *" ​​on the telephone dial (without quotes), the number that appears, is the PRODUCT ID.
You can Obtain the Code to unlock the Bootloader in the following ways:
Following in the footsteps of EloyGomez Video Tutorial:
Https://www.youtube.com/watch?v=AVmAEQjOnNQ
---------------------------------------------------------------------------------------------------------
Following the Steps of the Screenshots having already a previous orientation with the Video of EloyGomez:
Https://plus.google.com/u/0/photos/+JohnMillerDev7/albums/6305181114976401569
Using "Huawei Product ID Generator", and following the instructions (I recommend copying the data obtained in a notebook and saving them, you never know when you may need them again):
Download "Huawei Product ID Generator", extract it wherever you like and run it. (It's a very simple program).
Product Model: HUAWEI Y300-0000 (select that model).
Product IMEI / MEID: "Here they place their IMEI / MEID".
Product ID: "Here you generate the Product ID automatically according to the Product model & product IMEI / MEID that they placed above, and it is the one they should use on the page"
Go to the Huawei page to unlock Bootloader, either the English version or the Chinese version, the only thing that changes is the language. You can try with all 2 pages.
They create an account so they can log in, they can also log in with Facebook, it's very simple.
Once you have created your account and logged in, we will see the page to obtain the unlock code.
Fill in the fields with the data that we are requested and we will put the following:
Product type: Smartphone
Product model: HUAWEI Y300-0000 (If it does not work for them, try all the models that are in the generator) (Also try with CAPITAL & lowercase).
Product Serial number: You get it in Settings> About Phone> Status> Serial Number.
Product IMEI: You get it in Settings> About Phone> Status> IMEI.
Product ID: They get it with the "Huawei Product ID Generator" (the one that generated the program a while ago).
They place the Captcha that asks them for the page and they press Submit or Submit, they must give them the Code of Unlock for the Bootloader, they copy it in the scrapbook (that I suppose they must take).
Now go to Settings> About Phone and click on "Compilation" several times until the message "now you are a developer" is muted, you return to Settings and you will see the "Developer Options" tab, enter there, if the options are not active Of developer because they activate them, now they move a little down and activate "Depuracion USB".
Download the program "UNLOCK BOOTLOADER HUAWEI", Extract where you like, then connect your phone to the PC and run "UNLOCK THE BOOTLOADER.bat".
Already the rest is eaten, just follow the instructions that will indicate the program, the ADB & HiSuite Drivers will be installed (At most, they will only have to accept the terms, press next and finish), the Telephone will restart a few Sometimes do not worry or despair do not panic, it will be normal to restart.
When they have unlocked the Bootloader they can disconnect the Phone from the PC and turn it off.
Now let's check that everything went well, we kept pressing "Vol-" and at the same time we connected it to the PC, they will see a white screen with some letters (that is the Fastboot mode), and if they see the text "PHONE UNLOCKED" Congratulations, you have unlocked the bootloader correctly.
Make a beer, a soda, a Pau-Pau or Commit a Bread to celebrate, but do not get so excited because this is only the beginning, we still have a way to go, but certainly This is the most important step of all, Since without having the Bootloader unlocked it is not at all advisable to make Root to the phone, to install a recovery or to install a custom Rom, Those that use KingRoot for that after that they appear rare errors to them and even it damages them the telephone.
---------------------------------------------------------------------------------------------------------
OFFICIAL HUAWEI PAGE TO OBTAIN THE BOOTLOADER UNLOCK CODE:
Https://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
OFFICIAL PAGE OF HUAWEI IN CHINESE VERSION TO OBTAIN THE BOOTLOADER UNLOCK CODE:
Https://www.emui.com/plugin.php?id=unlock&mod=detail
TOOLS YOU SHOULD DOWNLOAD:
Unlock bootloader huawei: https://mega.nz/#!uRkC2DQS!R2IMpEpUAtrDH4-Gi4VLi8Mcz5_h98jtKsBATpMBQYg
Huawei Product ID Generator: https://mega.nz/#!eE81BbrT!_JBTy1ZCdFuYd7JwFLnaQe06I47ua__hEa4GHx6PZvM
If the PC does not recognize the phone even after the program installs the ADB Drivers automatically, then download, extract and install these, it is not at all complicated just connect your phone to the pc.
Run the programs just follow the instructions and you're done. You may have to press Next, Finish, "Y" or "ENTER".
Https://mega.nz/#F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg
---------------------------------------------------------------------------------------------------------
<<< CONVERT L23 IN L21 >>>
(If they already reached this step means that they are already Pros .... hahahaha not true, they believed it!, Keep reading!)
At this point what we will do first is to install the Recovery TWRP and make the Wipes Complete with the purpose of Erase the system and leave the Phone blank to make a Installation much Cleaner and without possible errors. To do this we follow the following instructions:
PS: They can install the Twrp that like V2 or V3, the procedures are the same, only slightly changes the interface.
Instructions for both versions:
Download INSTALAR RECOVERY TWRP (V2 or V3) HUAWEI P8 LITE.rar
Download adb-setup-1.4.3.rar
Unzip adb-setup-1.4.3.rar and run the program. (This is to install adb drivers and the pc can detect the terminal.)
You will see a blue console screen, type "and" or "accept" at all and close the window. If you ask them to restart the pc, do it and that's it.
Start your Phone in Fastboot mode; Switch off the phone and press the "vol-" key and without releasing it connect it to the PC until the Fastboot screen appears.
Unzip "INSTALL RECOVERY TWRP (V2 or V3) HUAWEI P8 LITE.rar" and execute the file "INSTALL RECOVERY TWRP (V2 or V3) HUAWEI P8 LITE.bat" and follow the steps.
It will not take more than 5 minutes just to press ENTER.
Turn off Cell Phone and Start in Recovery Mode TWRP (Vol + & Power), Press WIPE, Advanced Wipe and make the complete wipes:
You must dial:
Dalvik
Cache
Data
Internal storage
System
IMPORTANT !: Do not check "micro sdcard".
Go back to Menu, press Reboot, and then Bootloader.
Files:
TWRP V2:
Https://mega.nz/#!SZkzlQCb!iKBl1-6arjT6_9exrp9sc2aVzp7NnuKxECz6MVJ_Oms
TWRP V3:
Https://mega.nz/#!CZ91RQSA!B_kl3YPn7H38nbyG-5bVk2yt6qGDSsu3A2cnGysj7u4
ADB:
Https://mega.nz/#!eY1giTYD!cPs8mlBxgVP8DLHgWhCmf6Ay9hi56aTOEps55CVwiHU
Once the above is done correctly, we continue to move our P8 Lite L23 to L21, I recommend you remove your SD Card and SIM Card as a precaution. Follow the instructions:
Download "FlashRom C432B052 (Lollipop 5.0, EMUI 3.1) Dual Sim Transition", extract it wherever you like, start your phone in Fastboot mode, connect it to the PC, execute the file "FLASH-ALL.bat" (do not execute it with permissions Administrator), and follow the instructions given to you by the program.
When the process ends, the phone will start with the new system, if you go to "About the phone" it will say "Balong". To remove that you must install Step2.
Download "Step2", extract it, look for the file "UPDATE.APP" and copy it to the "DLOAD" folder of your SD Card, if you do not have it then create it. (It is clear that you must first insert the SD into the phone).
Then go to Settings> Updater> Menu> Local Update and select the UPDATE.APP (Step2). The phone will restart, the installation will begin and wait for it to finish. When you start the system and check in "About the phone" you will no longer say Balong, but L21.
After this it is recommended to do a factory reset, first remove your SD card, then go to "Settings> Security> Backup and Restore" or type in the search bar of "Backup and Restore" settings, press "Reset factory data "Check" Clear internal memory ", click on" Reset "and wait for the process to finish. If for some reason "Failed" does not worry, it only restarts, the cell will have been reset anyway, do not worry if you do not have a signal or it does not detect the SIM, that is fixed by installing the next update.
Congratulations, you've already passed your cel to L21!
Files:
FlashRom C432B052: https://mega.nz/#!LQNimCgQ!oq2C_Gwvwv7zoigo8GR2kstPdHDO5ESJ9Qglv_2UERs
Step2: https://mega.nz/#!vdsDEZSb!3FIgh6WNgP4NWRfnGoDxisd1wAQk3CBPKdKl8_If-v0
---------------------------------------------------------------------------------------------------------
<<< UPDATE ANDROID 6 OFFICIAL >>>
The update order is as follows: "B052> B560> B564> B574> B584> B594> B596> B598> or" B552> B570> B560> B560> B564> B574> B584> B594> B596> B598 ".
Being already in the B052 we only have to download the following Compilations and go updating via local:
"B552> B570> B560> B564> B594> B594> B594> B596> B598 'or' B552> B570> B560> I recommend that for every update they make, make a factory reset to avoid possible errors, this is optional after all, I only make the recommendation from their own experience.
Download the B170, extract the files, Copy the UPDATE.APP to the DLOAD folder of your SD, go to Settings> Updater> Menu> Local Update and select the UPDATE.APP, the phone will restart, the installation will begin and wait for To finish.
Now on the B170, Repeat the previous step to install the B550 or B560 Compilation. (Depending on the order of updating mentioned above, that works best for them or decide to take)
Now when they are in the B560 we go to the B564 but the option of "Local Update" will no longer appear, so we have 2 options to carry out the update: (they should already have the UPDATE: APP previously copied in the DLOAD, The update.app is always due to copying to Dload there is no other):
Option 1:
Write the following code in the calls app "* # * # 2846579 # * # *" ​​(without quotes obviously).
The famous hidden menu will appear, click on "Software Upgrade"> "SDCard Upgrade"> you will receive an "Are you Sure" message, press OK, start the update and wait for it to finish.
Option 2:
While the Cel is off or on, press the keys (Vol-, Vol +, Power) until you see the update screen and wait for the process to finish.
And that would be Todo, Felicidades ya habras updated Your phone to Android 6!
If you've already come up here means you're half Pro.
Official Roms (Local Via Installation):
ALE-L21C432B170
Https://mega.nz/#!eYUgxbrb!yccoxiIsXjIHdiGxdP6AU05S1fYQGNNMRba427BxEgs
ALE-L21C432B550
Http://download-c.huawei.com/download/downloadCenter?downloadId=78426&version=312720&siteCode=en
ALE-L21C432B560
Http://download-c.huawei.com/download/downloadCenter?downloadId=80469&version=319382&sit eCode=pl
Https://mega.nz/#!uRNRDRaA!zavgQtBakqdg_lbXmgoKwB7qotPoXOJvJofvnPlM1CI
ALE-L21C432B564
Https://mega.nz/#!kJkESTKT!1cGtLB0HxQN0x-KeyB2MqQ3JWeGEnvD2aKll7vsCa60
ALE-L21C432B574 - 2016.07.19
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v56678/f1/full/update.zip
ALE-L21C432B580
Https://mega.nz/#!2RUgxKiI!c-RX4wJsilZuxEDFwWJ2lcO-tpC4J5Q3uGbHUo4c1Vw
ALE-L21C432B584 - 2016.11.21
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v67128/f1/full/update.zip
ALE-L21C432B586 - 2016.12.13
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v69882/f1/full/update.zip
ALE-L21C432B588 - 2016.12.26
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v72428/f1/full/update.zip
ALE-L21C432B594 - 2017.02.28
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v77344/f1/full/update.zip
ALE-L21C432B596 - 2017.03.28
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v80333/f1/full/update.zip
ALE-L21C432B598 - 2017.04.20
Http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1084/g104/v83472/f1/full/update.zip
---------------------------------------------------------------------------------------------------------
<<< INSTALL CUSTOM ROMS, RECOVERYS, ROOTEAR, AND MANY MORE THINGS >>>
I have compiled a collection of various interesting contributions to facilitate your search, so check it out!
Http://www.htcmania.com/showthread.php?t=1310020
*
<< DRIVERS EXTRAS >>
Here I leave some extra drivers to solve problems with issues of fastboot, adb, in case the PC does not detect the mobile, the installation of each is very simple, just keep your cell connected to the pc, run the programs, you have to Give it to "next" and restart the PC if necessary.
Files:
Https://mega.nz/F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg#F!SZM21JKa!gE1IWif0EJH6-UwrJWQBAg
And that's it, I hope I was clear and supported with this Tutorial,
Greetings from Mordor!
---------------------------------------------------------------------------------------------------------

Empty

Im trying to use huawei product id generator but I always get this message in unlock page
I tried with c8812 and Y300-000 and all have the same results.
ALE-L21
Please make sure the verification code and model number are correct. If your device has multiple IMEIs or MEIDs, please try another IMEI or MEID.

Honor 9 Lite "how i repair MY bootloop"

Just for Info
I am brick MY phone, what have i done ?
On all my phones is first doing: bootloader unlock, install twrp and rooting.
1 - i login by huawei, fill the form and return my unlock-code
2 - search twrp ( i am found ; but it was the wrong one. [i think i need new eyes])
3 - on phone : menu / 7x tip on build activate developer options / go to developer options / enable oem-unlock and enable usb-debugging
4 - usb-wire in phone and pc, on pc (linux) start terminal (the same as windows dos-prompt), type "adb devices", on phone-screen "access for develop" hook & ok
5 - adb reboot bootloader
6 - fastboot devices (connection test)
5 - fastboot flash recovery_ramdisk twrp.img
6 - fastboot reboot
7 - phone reboot in twrp (not OS)
from now, what ever i do, phone boot only in twrp BOOTLOOP
now i am search in XDA and AH (german community AndroidHilfe) "honor 9 lite bootloop" NOTHING
by random found on AH "Huawei P smart [How to Root] + TWRP - Root - Anleitung". Huawei P smart is sister from Honor 9 Lite (very helpful thread-writer on AH)
ho help : at this moment no downloads at huawei/honor 9 lite (for help i need "update.app") now i wait...
2 days later (wait is not my strength) i found FHMate10Tool. users write "this can work/cant work - test it.
i test it. on windows-pc open explorer, go to folder, right-click on FHMate10Tool.exe, "run as admin", dos-prompt open and write text from tool
usb-wire in pc and phone (phone is on)
point 1 in tool: "root phone" ; i write "1" and press enter
tool write "this rooting phone: for yes press enter", i press enter, 4..5 seconds later write tool "your phone is rootet and rebooting"
phone reboot and boot i customOS - WOH :laugh: phone configure, apps install and phone working (always inside the wrong twrp)
5 days later phone write"new update anailable! install?" "yes" and ota-update download (i think 1 hour) and write "update now" "yes"
update go to factory-update-mode (erecovery?) begins and brake by 25%, "what a hell !!!", i reboot
now the best idea from my life. i copy with es-explorer(root) from /data/update/Hwouc/... the "update.app" to my sd-card.
my phone have build 8.0.0.121, the update.app is LLD-L31 8.0.0.127(C432)FULL. This is important, the little updates not inside "system, recovery". the FULL is what i need.
start HuaweiUpdateExtractor, select update.app, settings "all hook out", extract "recovery_ramdis.img" and "system.img" (automatic extract the header-files)
now copy this 4 files to my adb-folder, phone in bootloader-mode, usb-wire pc to phone
open dos-promt, cd.. to adb-folder, check connection with "fastboot devices", connection work and the fun begins
- fastboot flash recovery_ramdisk recovery_ramdis.img
- fastboot flash system system.img
NOW is custom recovery and system on phone
to clear userdata
- fastboot erase userdata (this make what you reed: ERASE)
- now boot to erecovery (usb-wire in pc and phone, vol-up and power press on phone) and make factory reset. this make low-level-format with userdata.
- reboot and phone is clean and fresh as a new phone. no twrp, no rootet. if i wish (yes) i can fresh install
only restriction at this time: twrp is beta! no full work, backup/restore system = work, backup/restore data = NOT work.
supplement
this work on my phone! on your phone? test at your owen risk
bevor twrp has full-function: attention to this point. no data-backup. everyone brake phone: you begins by zero /better begins zero else phone ded
experience
i search for LOS15.1 or RR, for this phone nothing found. i test system.img(oreo!) from other models (my risk, my phone, my fun). i test to now 5x, next test in 5 minutes
now nothing run on my phone. flash *.img, no boot to OS, the game starts from the beginning
- inserted 20180325 13:05 test not work, return to customOS
- inserted 20180325 13:40 systemOS work, SuperSU is from old install! ALL GOOD :good:
bootloader is open if: PHONE Unlocked & FRP Unlock
I hope this is helpful for your bootloop :angel:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

@JamesBott flash this RR.. it will work in Honor 9 Lite..
https://forum.xda-developers.com/pr...opment/resurrection-remix-phh-treble-t3767688

@VigneshS007
thank's for your help. i test rom in next 2..3 hour. then i see is work/no work...
i think, i open new threat > "Honor 9 Lite "my test's with other rom's" <
i am german, i need "order"
if i search "bootloop" i wish find bootloop and anwer for this theme in 1 thread
what is the bootlop answer is in "new rom" ? and i don't find this thread ? that's NO good
all other nations : this is "german thinking" (for you is "can" / not "must" !!!)
is the same as comedy "you can laugh, but you do not have to" <- it's a joke
here is not the place for principle disputes, it's only my thinking and i hope you understand me
my english is only "learning by writing" and google-translating
i am now installed Telegram and look in this group
i have to tell you, i think that's a pity
xda is the world-community for android and all world-user. any user search for question's and answer's and this in xda.
i wish, the tegram-group come in to xda and all user (world) find these inside xda (my thinking !)
why: look in this forum. i feel "this is my forum" . i wish other write also here (ROMs...Development)
or is it to early ? the phone is to young / to short on market ?
How is the developer to make twrp with 100% working ? for this phone ! i donate with 20€ ! honestly! (i hope, this is incentive enough)

sorry, duplicate from #3

@VigneshS007
hi brother, please look
https://forum.xda-developers.com/9-...r-9-lite-test-devices-developer-roms-t3768950

Bootloop again
JamesBott said:
Just for Info
I am brick MY phone, what have i done ?
On all my phones is first doing: bootloader unlock, install twrp and rooting.
1 - i login by huawei, fill the form and return my unlock-code
2 - search twrp ( i am found ; but it was the wrong one. [i think i need new eyes])
3 - on phone : menu / 7x tip on build activate developer options / go to developer options / enable oem-unlock and enable usb-debugging
4 - usb-wire in phone and pc, on pc (linux) start terminal (the same as windows dos-prompt), type "adb devices", on phone-screen "access for develop" hook & ok
5 - adb reboot bootloader
6 - fastboot devices (connection test)
5 - fastboot flash recovery_ramdisk twrp.img
6 - fastboot reboot
7 - phone reboot in twrp (not OS)
from now, what ever i do, phone boot only in twrp BOOTLOOP
now i am search in XDA and AH (german community AndroidHilfe) "honor 9 lite bootloop" NOTHING
by random found on AH "Huawei P smart [How to Root] + TWRP - Root - Anleitung". Huawei P smart is sister from Honor 9 Lite (very helpful thread-writer on AH)
ho help : at this moment no downloads at huawei/honor 9 lite (for help i need "update.app") now i wait...
2 days later (wait is not my strength) i found FHMate10Tool. users write "this can work/cant work - test it.
i test it. on windows-pc open explorer, go to folder, right-click on FHMate10Tool.exe, "run as admin", dos-prompt open and write text from tool
usb-wire in pc and phone (phone is on)
point 1 in tool: "root phone" ; i write "1" and press enter
tool write "this rooting phone: for yes press enter", i press enter, 4..5 seconds later write tool "your phone is rootet and rebooting"
phone reboot and boot i customOS - WOH :laugh: phone configure, apps install and phone working (always inside the wrong twrp)
5 days later phone write"new update anailable! install?" "yes" and ota-update download (i think 1 hour) and write "update now" "yes"
update go to factory-update-mode (erecovery?) begins and brake by 25%, "what a hell !!!", i reboot
now the best idea from my life. i copy with es-explorer(root) from /data/update/Hwouc/... the "update.app" to my sd-card.
my phone have build 8.0.0.121, the update.app is LLD-L31 8.0.0.127(C432)FULL. This is important, the little updates not inside "system, recovery". the FULL is what i need.
start HuaweiUpdateExtractor, select update.app, settings "all hook out", extract "recovery_ramdis.img" and "system.img" (automatic extract the header-files)
now copy this 4 files to my adb-folder, phone in bootloader-mode, usb-wire pc to phone
open dos-promt, cd.. to adb-folder, check connection with "fastboot devices", connection work and the fun begins
- fastboot flash recovery_ramdisk recovery_ramdis.img
- fastboot flash system system.img
NOW is custom recovery and system on phone
to clear userdata
- fastboot erase userdata (this make what you reed: ERASE)
- now boot to erecovery (usb-wire in pc and phone, vol-up and power press on phone) and make factory reset. this make low-level-format with userdata.
- reboot and phone is clean and fresh as a new phone. no twrp, no rootet. if i wish (yes) i can fresh install
only restriction at this time: twrp is beta! no full work, backup/restore system = work, backup/restore data = NOT work.
supplement
this work on my phone! on your phone? test at your owen risk
bevor twrp has full-function: attention to this point. no data-backup. everyone brake phone: you begins by zero /better begins zero else phone ded
experience
i search for LOS15.1 or RR, for this phone nothing found. i test system.img(oreo!) from other models (my risk, my phone, my fun). i test to now 5x, next test in 5 minutes
now nothing run on my phone. flash *.img, no boot to OS, the game starts from the beginning
- inserted 20180325 13:05 test not work, return to customOS
- inserted 20180325 13:40 systemOS work, SuperSU is from old install! ALL GOOD :good:
bootloader is open if: PHONE Unlocked & FRP Unlock
I hope this is helpful for your bootloop :angel:
View attachment 4457135
Click to expand...
Click to collapse
I have to apply the procedure point by point unfortunately the factory reset of the erecovery remains blocking to zero, and I remain in bootloop. . . Do you have a backup stock flashable rom with twrp? OR ANOTHER SOLUTION? THANKS

i have finally twrp reflash and i made a factory reset with twrp ... normal boot result and everything works ... i have the possibility thereafter of reflashed erecovery stock ... but not useful for me for the moment ... how is it that my firmware number does not match your file? I am in b128 and your update full file is in b127?

@angixspirit
my last FULL-Update is "b127".
Now is TWRP with de-/encrypt in short time available (i am test beta-version)
I wish reset my "data" to factory-settings(crypt)
I use recovery_ramdisk_BKL-L04_nocheck (thank's @Atarii) for install my FULL-Update
After this reboot my phone, FULL-Update is installed AND "data" is crypted (factory-state)
Now work twrp (new twrp in test-version !) WITH de-/encryption.
I hope in next days comming new thread from developer in this forum.
The new TWRP is in standard-look and -feeling and -language.
Over night came update "b128"
The way with recovery_ramdisk_BKL-L04_nocheck (thank's @Atarii) have advantage
- the complete stock-rom is reflashed (with all partitions inside update)
- erecovery work (by me)
disadvantage
- the huawei-bloatware now again delete

Where to find this recovery?recovery_ramdisk_BKL-L04_nocheck?
---------- Post added at 04:11 PM ---------- Previous post was at 03:36 PM ----------
angixspirit said:
i have finally twrp reflash and i made a factory reset with twrp ... normal boot result and everything works ... i have the possibility thereafter of reflashed erecovery stock ... but not useful for me for the moment ... how is it that my firmware number does not match your file? I am in b128 and your update full file is in b127?
Click to expand...
Click to collapse
But I used your update full b127 and when such starts I'm in b128 (update at startup age maybe?)

https://forum.xda-developers.com/ho.../recovery-bkl-nocheck-recovery-flash-t3778085
your firmware
i think, your build is b128. if you update to b127 = downgrade. i dont know if this work in stock-rom.
Search
you see on xda-side in browser on top / right the "search-field" ?
Search-Field = "Type device or find apps, ROMs, & more"
this search in xda and is faster as search in google
Your personal task : search in xda "Huawei Firmware Finder" and look for thread.
If you found the thread then download the Software to your PC, install and search in FirmwareFinder "FULL-Upate" for your phone.
I am found LLD-L31 8.0.0.131(C432). This is actual the last build for download.
I'm curious if you think so
If you found : you can see, what TeamMT offer on Firmware for your phone.

Nice
I repeat the procedure with your ram file erecovery disk ... Same result impossible to make factory reset, and Huawei tells me that the tel is rooted and I am in b128 ... I have yet made a wipe of the storage system intern etc with twrp before, and. I used your full update b127 for fastboot ...
So here after installation I used firmware finder I chose the firmware b127 full I used the proxy for download internally .. And here my system asks me the official update to b127 ... No problem the system comes back with the bloatware in erecovery the factory reset works fine ... And since update removed to b128 b130 ... ?
Strongly the new twrp that I continue my experimentation
Ps Ps I just saw your message on update finder .. I know all this thank you very much

Huawei LLD-AL10
Phone Relocked
FRP Lock
any fix

Zunayedazad said:
Huawei LLD-AL10
Phone Relocked
FRP Lock
any fix
Click to expand...
Click to collapse
https://forum.xda-developers.com/9-lite/how-to/guide-unlock-frp-phone-bootlooping-t3808650
Tell me your C-Number to find the correct firmware to flash.
Sent from my kminiltexx using XDA Labs

[GUIDE][Z2 FORCE XT1789-05] Bootloader/TWRP/Custom ROMs/Root/Dirty flashing/Unbrick

First, thanks to @Uzephi and @41rw4lk for helping me to use/recover my phone. Please, read and do not underestimate the guides: our phone is tricky! We have two system partitions (slot a and b) to allow stock updates on-the-fly. This complicates the normal flashing process and if you do not follow the steps, you may bootloop. Use these guides at your own risk!
Reading this page is a good beginning to understanding the A/B partitioning scheme and how Motorola Z2 Force works:
1) Our phone has A/B partitioning, so flashing Magisk/XPosed is different
2) It does not support Project Treble (faster stock updates)
3) It does not a recovery partition, so flashing TWRP is different
Note also that the RSD Lite from Motorola has issues with Windows 10 and you’ll need to manual flash firmware if you bootloop (see Process E below). Other way is directly flashing from Qualcomm EDL mode (Emergency Download Mode) from which users can perform various tasks like unbricking, unlock bootloader, and installation of any custom ROMs.
Right now, this guide has 5 parts (maybe we can dual boot our phone in the future). If you just want to use a rooted stock ROM, please, search for other guides here on xda. These guides were written (and tested) using a Motorola Z2 Force XT1789-05 phone (Brazil), although most of it should work for other variants if you download and use proper firmware files for these other phones. For other models, better if you follow Uzephi’s guide.
A. Opening bootloader
B. Preparing the phone to move into custom ROMs (AOSP) + TWRP recovery
C. Flashing a custom AOSP ROM + rooting
D. Dirty flashing AOSP ROM updates
E. Recovering from bricks or returning to stock
F. Oreo ROM features comparison table
If you want to move your Motorola Z2 Force to Project Treble ROMs, please, check this guide.
Here is a list of the ROMs that are waiting for you.

A. Opening bootloader
With enough battery in your phone (80%), you can follow the Motorola official guide which steps are:
1. Backup everything you need. Your phone will be reseted including the internal sdcard.
2. Into the phone, enable the Developer Options clicking 7 times over the version (About section in the Settings). Go to Developer Options, click the OEM unlock option to enable it. Also enable USB debugging.
3. Install the Motorola drivers in your computer, but (in my personal experience) not the Android SDK suggested in the official guide. Instead, extract these adb/fastboot files in a blank folder of your computer.
3.1) Do not use other adb/fastboot binaries: I cannot guarantee they will work.
3.2) You need to use a USB 2.0 port of your computer. Some users report that USB 3.0 will also work.
4. Open a command line window in the adb/fastboot folder (step 3), reboot the phone into the bootloader (see adb command below or press power + volume down buttons). Plug the phone on computer (see 3.2 above). Test the connection and run the command to get the code for unlocking:
Code:
adb reboot bootloader
fastboot devices
fastboot oem get_unlock_data
You’ll get:
Code:
(bootloader) Unlock data:
(bootloader) <code 1>
(bootloader) <code 2>
(bootloader) <code 3>
(bootloader) <code 4>
(bootloader) <code 5>
5. You’ll need to join 5 codes and, after logging into your own Motorola account, check by clicking the button “Can my device be unlocked” (step 6) by Motorola here. Read the text: your warranty will be void if you go ahead. Consider if you have enough knowledge, time and money to deal with a troublesome (or bricked) device. Although, it’s not that easy to hard brick this phone (see process E below).
Code:
<code 1><code 2><code 3><code 4><code 5>
6. You’ll receive back an email with the code to unlock your bootloader (if it is available for your model). Then you’ll run the following command:
Code:
fastboot oem unlock <code 1><code 2><code 3><code 4><code 5>
7. You’ll receive a warning that all your data would be erased (see step 1 above) and need to re-run the same command to confirm. At this point, your bootloader should be unlocked. As an Android restriction, each time you boot the phone you’ll see a warning. Do nothing, wait for 5 seconds and the phone boots normally. Some users bother with this warning and try to get rid of it.

B. Preparing the phone to move into custom ROMs (AOSP) + TWRP recovery
Requirements: unlocked bootloader (see guide A) and no security lock: disable PIN, gestures and fingerprinting (because TWRP cannot read the locked/cryptographed data of the phone). Enough battery in your phone (80%).
If you do not prepare your phone to custom ROMs and if you do not have both bootloaders of the phone in the same Android version of the ROM you’ll flash, you’ll hard brick the phone and lose also the access to the bootloader! You’ve been warned: follow the guide!
Note: if you hard brick, I suggest you be prepared to follow the Unbrick Qualcomm mobiles with Step-by-step guide or the Unbrick All Qualcomm Snapdragon’s from Qualcomm HS-USB QDLoader 9008 guide, but I never tested them myself. You can also use Qualcomm Flash Image Loader (QFIL) tool.
1. Backup everything you need. Your phone will be reset including the internal sdcard.
2. Into the phone, enable the Developer Options clicking 7 times over the version (About section in the Settings). Go to Developer Options and enable USB debugging.
3. Install the Motorola drivers and the adb/fastboot files.
3.1) do not use other adb/fastboot binaries: we cannot guarantee they will work.
3.2) you need to use a USB 2.0 port of your computer. Some users report that USB 3.0 will also work.
4. Download the firmware of the same Android major version of the future ROM you’ll install (Oreo for Oreo ROMs, for instance). When (and if) we move to Android P, most probably we will need to follow this guide again.
- Retail (XT1789-05) (Europe/Brazil).
- Other models (branded): ATT, Sprint, T-Mobile (TMO), USC, Verizon.
- Note: NPXS26 versions stand for Nougat and OPXS27 for Oreo. You do not need Nougat versions for anything.
5. Extract the zip contents to a blank folder in your computer.
6. Download the FlashAll_XT1789-05.zip file, extract the content and move all files to the same firmware folder (step 5 above). Be sure to overwrite any file (if needed).
7. Run the Preparation.bat file there to generate the flashfile.bat file that will send the commands to the phone. Credits: the original preparation files were from RootJunky (can be downloaded here) and include more options that we do not need for our purpose here. Also, it includes adb/fastboot binaries that could not work with our phone.
8. Reboot the phone into the bootloader (see adb command below or power + volume down buttons). Open a command line window in the firmware folder (step 5 above), test the connection and execute the flashfile.bat file generated on step 7.
Code:
adb devices
adb reboot bootloader
fastboot devices
flashfile.bat
Never ever unplug the device from the USB 2.0 port while flashing the firmware. This could cause a hard brick and your device will be dead.
9. There is a pause at the end. You should review if everything went fine (or even click on the menu of the command line window, select all and copy&paste the contents in a .txt file for further help/revision).
10. Reboot your phone into the system (ROM) and do a quick configuration (remember that everything will be deleted when you install TWRP further…).
11. Into the phone, enable the Developer Options clicking 7 times over the version (About section in the settings). Go to Developer Options and enable USB debugging.
12. Download both the .img and .zip file of the TWRP recovery from the official site. It's the same file for all models/variants of Z2 Force phone. Put the files into our firmware folder (step 5 above). Copy the .zip file to the phone internal card. Note: versions older than 3.2.2-2 does not support PIN/Password/Fingerprint, so disable them before proceed. Most probably, ROMs before July 20th, 2018 cannot be flashed in older TWRP.
13. Now boot (not flash) the TWRP .img file using a command line window in the same firmware folder (step 5 above):
Code:
adb devices
adb reboot bootloader
fastboot devices
fastboot boot <TWRP file name>.img
14. Only now that you’re inside TWRP temporarily flash the TWRP .zip file you’ve saved into the phone (step 12 above).
15. Reboot into TWRP (use the main reboot menu in TWRP).
16. Now, you should reboot again into bootloader: inside TWRP, go to Reboot menu and choose Bootloader.
17. Now you will wipe all user data via bootloader. This is necessary to use an AOSP ROM when you come from stock. Using a command line window in the same firmware folder of your computer (step 5 above), run the following commands:
Code:
fastboot devices
fastboot -w
18. Now you can reboot the phone into System using the buttons volume up/down to navigate and confirming with the Power button. You’ll be with stock ROM and TWRP. If you want to move to a custom AOSP ROM, do a quick configuration: into the phone, enable the Developer Options clicking 7 times over the version (About section in the settings). Go to Developer Options and enable USB debugging and go to the proper guide (Process C).

C. Flashing a custom AOSP ROM + rooting
1. Requirements:
1.1 Motorola drivers.
1.2 Our custom adb/fastboot files (others may not work!).
1.3 USB debugging enabled into the Developer Options.
1.4 If you're using TWRP older than 3.2.2-2, disable disable PIN/gestures/fingerprinting. Also, most probably, ROMs after July 20th, 2018 cannot be flashed in older TWRP.
1.5 An USB 2.0 port of your computer (some users report that USB 3.0 will also work).
1.6 Two Oreo bootloaders (process B above).
1.7 Permanent TWRP
1.8 Enough battery in your phone (80%).
2. Download the AOSP ROM you want and move the .zip files to the phone. Right now, we have:
2.1 Dirty Unicorns: no need for Gapps. Official and Weeklies can be dirty flashed interchangeably. RC has a different signature. Support on Google+ page. More about DU kernel.
2.2 Lineage OS 15.1. MindTheGapps needed. OpenGapps not compatible yet. XDA thread.
2.3 Mokee: Gapps needed. Take care: online guides assume that you already have an AOSP ROM, TWRP and rooted device.
Deprecated (?)
2.4 AOSiP: no need for Gapps. XDA thread.
2.5 Invictrix. Gapps are built in. XDA thread
3. Choose the root method and download the .zip files: Magisk (suggested) or LineageOS SU Addon. Move the .zip files to phone. Note: if you bootloop on Magisk, most probably you’re flashing a wrong/different version of Magisk or you did not reboot between flashing ROM/Gapps and Magisk. Note: SuperSu is deprecated.
4. Reboot into TWRP:
Code:
adb reboot recovery
Then flash the ROM. It will be flashed in two steps only in the “other” slot. We have two slots, A and B. Our phone can be upgraded on-the-fly because the update is always applied to the slot not booted, the “other” slot. Then, immediately, flash the .zip TWRP or you will lose it.
5. Go to Reboot menu of TWRP and reboot into bootloader. Then, in the folder with adb/fastboot binaries (see 1.2 above), you need to wipe data (including sdcard) with the following commands:
Code:
fastboot devices
fastboot -w
6. Now you need to reboot the phone into System using the buttons volume up/down and confirming with the Power button (or typing fastboot reboot into the command line windows). You’ll be with an AOSP ROM and TWRP.
7. Once into the phone, enable the Developer Options clicking 7 times over the version (About section in the settings). Go to Developer Options and enable USB debugging if you intend to dirty flash ROM updates.
8. Reboot into TWRP again, flash Magisk (your settings and modules will be preserved). Note: if you bootloop on Magisk, remember it is mandatory to reboot between ROM flash (step 4 above) and GApps/Addon flash due to verity/slot-swap logic.
9. A good place to read what is not working is in the section known problems of LineageOS.

D. Dirty flashing AOSP ROM updates
1. If you follow all the processes above, you can dirty flash updates because you have:
1.1 Motorola drivers installed.
1.2 Specific adb/fastboot files for our phone and an USB 2.0 port in a Windows computer (some users report that USB 3.0 will also work).
1.3 Unlocked bootloaders (Process A above).
1.4 Permanent TWRP running and TWRP .zip file placed inside your phone and ready to be flashed again.
1.5 An AOSP ROM already running.
1.6 Developer Options and USB debugging enabled.
1.7 If you're using TWRP older than 3.2.2-2, disable disable PIN/gestures/fingerprinting. Also, most probably, ROMs after July 20th, 2018 cannot be flashed in older TWRP.
1.8 Enough battery in your phone (80%)
2. Download your ROM .zip update, copy it into the phone sdcard and reboot your phone into TWRP. See download links here.
3. Within TWRP you should flash (install) things in the following order:
3.1 ROM update .zip file. Remember that, at this time, the update will be flashed int the other slot and inside phone you’ll have both the system before update (in the booted slot) and updated ROM in the other slot.
3.2 TWRP .zip file (step 1.4 above) once again (do not skip this step or you’ll bootloop!).
4. Reboot to System: if you skip this step, you’ll bootloop.
5. Reboot into TWRP again, flash Magisk (your settings and modules will be preserved) or LineageOS SU Addon .zip file. Note: if you bootloop on Magisk, most probably you’re flashing a wrong/different version of Magisk. I suggest v16.0 and, after you got rooted with 16.0, you can update. It is mandatory to reboot between ROM flash (step 4 above) and GApps/Addon flash due to verity/slot-swap logic.
Note: SuperSu is deprecated.
6. Wipe Dalvik/ART cache: go to Wipe menu of TWRP > Advanced Wipe > Dalvik/ART Cache only.
7. Reboot your phone into System (ROM) will use the “other” slot, the one with the updated ROM.
8. You can use XPosed installer app (and reboot).
9. Now you can add your PIN, fingerprint, gestures back until next flashing.

E. Recovering from soft bricks or returning to Stock
If you’re reading this is because you already unlock your bootloader (see guide A) and anything went wrong, but you still can boot your phone into bootloader. Plug your phone and get enough battery (even if you do not see any charging signal).
1. Install the Motorola drivers and the specific adb/fastboot files for our phone. Remember, follow the rules because our device is tricky!
1.1) Do not use other adb/fastboot binaries: we cannot guarantee they will work.
1.2) You need to use a USB 2.0 port of your computer (some users report that USB 3.0 will also work).
2. Download the latest firmware for your model:
- Retail (XT1789-05) (Europe/Brazil).
- Other models (branded): ATT, Sprint, T-Mobile (TMO), USC, Verizon.
- Note: NPXS26 versions stand for Nougat and OPXS27 for Oreo. You do not need Nougat versions for anything.
3. Extract the zip contents to a blank folder in your computer.
4. Download the FlashAll_XT1789-05.zip file (it should work for other Motorola Z2 Force models as well), extract the content and move all files to the same firmware folder (step 2 above). Be sure to overwrite any file (if needed).
5. Run the Preparation.bat file there to generate the flashfile.bat file that will send the commands to the phone. Credits: the original preparation files were from RootJunky (can be downloaded here) and include more options that we do not need for our purpose here. Also, it includes adb/fastboot binaries that could not work with our phone.
6. Reboot the phone into the bootloader (see adb command below or power + volume down). Open a command line window in the firmware folder (step 5 above), test the connection and execute the flashfile.bat file generated on step 5.
Code:
adb reboot bootloader
fastboot devices
flashfile.bat
Never ever unplug the device from the USB 2.0 port while flashing the firmware. This could cause a hard brick and your device will be dead.
7. There is a pause at the end. You should review if everything went fine (or even click on the menu of the command line window, select all and copy&paste the contents in a .txt file for further help/revision).
8. Reboot your phone into system (ROM) and do not forget, later, to enable the Developer Options and USB debugging again.
Note: if you hard brick, I suggest you be prepared to follow the Unbrick Qualcomm mobiles with Step-by-step guide or the Unbrick All Qualcomm Snapdragon’s from Qualcomm HS-USB QDLoader 9008 guide, but I never tested them myself. You can also use Qualcomm Flash Image Loader (QFIL) tool. Maybe these Latest 2017 Qualcomm Diag QD-Loader Windows 10 Drivers signed will help you.

F. Oreo ROM features comparison
This is a table for Oreo ROM features comparison for Motorola Z2 Force - nash.
I would like to receive feedback and updates from the users, as I can't keep changing from one ROM to another and they get new features, updates, improvements, etc.
I consider Lineage OS 15.1 our stock ROM regarding to customization. So, it's not listed there.
Legend:
Code:
X = Feature present
XX = ROM excels in this particular feature (in my opinion).

If you want to move your Motorola Z2 Force to Project Treble ROMs, please, check this guide.
Here is a list of the ROMs that are waiting for you.

I came back to stock ROM. the problem is that it gets stuck in the initial configurations of the android trying to find a wifi network, to continue the configuration, without success, because I see in fastboot that the baseband is unknown, and I also can not install any rom, or recovery image because I have the following message in fastboot: FLASHING_LOCKED. and since I can not get past the initial android settings, I also can not unlock the developer options to enable OEM unlocking. now I'm standing in a rom that does not leave the initial configuration, it does not connect to any network and a fastboot that does not let me install anything. and I also tried the recovery mode and even tried to install an update via sideload, without success. I do not know what else to do if you can give me a light.

renanjones said:
I came back to stock ROM. the problem is that it gets stuck in the initial configurations of the android trying to find a wifi network, to continue the configuration, without success, because I see in fastboot that the baseband is unknown, and I also can not install any rom, or recovery image because I have the following message in fastboot: FLASHING_LOCKED. and since I can not get past the initial android settings, I also can not unlock the developer options to enable OEM unlocking. now I'm standing in a rom that does not leave the initial configuration, it does not connect to any network and a fastboot that does not let me install anything. and I also tried the recovery mode and even tried to install an update via sideload, without success. I do not know what else to do if you can give me a light.
Click to expand...
Click to collapse
I see two possible scenarios:
1. Your bootloader is locked (yet) (see guide A).
2. Your in a "false locked" situation that, maybe, could be solved by resetting data via recovery or in bootloader (with the command: fastboot -w).

Great tutorial, but I did not get 4g in any of the roms, only 3g

Gutto said:
Great tutorial, but I did not get 4g in any of the roms, only 3g
Click to expand...
Click to collapse
I got 4G in any ROM... AOSIP, DU or Invictrix...
Are you using a branded (carrier) phone? If not, maybe you should return to stock (to recover any changes on partitions).

Technical said:
I got 4G in any ROM... AOSIP, DU or Invictrix...
Are you using a branded (carrier) phone? If not, maybe you should return to stock (to recover any changes on partitions).
Click to expand...
Click to collapse
My cell phone and Sprint, I did every process that you indicated, but not 4G

So I followed the instructions as noted, as soon as I got to the root installation part, it started throwing a "cannot mount /system" error. I thought a reboot would solve the issue, but now I think I'm bricked. Can't boot into anything, all I can do is plug my phone in and listen to it keep disconnecting every 10 seconds or so. The phone had booted up fine prior to starting the installation process, and I don't see how just a bad ROM install is preventing me from getting into either bootloader or recovery. Any advice?
For clarity, i'm unable to use QBOOT to do anything since after it hits the "powered on" state I'm assuming it's in, it just resets and does the same thing over and over again

shalpp said:
So I followed the instructions as noted, as soon as I got to the root installation part, it started throwing a "cannot mount /system" error. I thought a reboot would solve the issue, but now I think I'm bricked. Can't boot into anything, all I can do is plug my phone in and listen to it keep disconnecting every 10 seconds or so. The phone had booted up fine prior to starting the installation process, and I don't see how just a bad ROM install is preventing me from getting into either bootloader or recovery. Any advice?
For clarity, i'm unable to use QBOOT to do anything since after it hits the "powered on" state I'm assuming it's in, it just resets and does the same thing over and over again
Click to expand...
Click to collapse
Have you tried holding vol dwn + pwr btn to force it into bootloader mode? If you can get there, then you can use the keys to get to recovery and try a factory reset. If that don't work, go back to bootloader mode and try flashing back to stock. Might double check that the battery has plenty of charge.

41rw4lk said:
Have you tried holding vol dwn + pwr btn to force it into bootloader mode? If you can get there, then you can use the keys to get to recovery and try a factory reset. If that don't work, go back to bootloader mode and try flashing back to stock. Might double check that the battery has plenty of charge.
Click to expand...
Click to collapse
I'm unable to get the phone out of qboot (or whatever it's called). I've tried using a blank-flash but all that happens is device restarts as made evident by the "device disconnect" sound playing every few seconds. The phone had around 80% when I started the process. Should I just let it die and try loading into BL after a few hours of this thing power cycling itself?

shalpp said:
I'm unable to get the phone out of qboot (or whatever it's called). I've tried using a blank-flash but all that happens is device restarts as made evident by the "device disconnect" sound playing every few seconds. The phone had around 80% when I started the process. Should I just let it die and try loading into BL after a few hours of this thing power cycling itself?
Click to expand...
Click to collapse
It's weird that it is power cycling like that. Have you tired unplugging the phone and booting? Whether it's recovery, bootloader, qboot; you need to get to one place or the other if possible because power cycling won't allow you to do anything. If you can get a stable boot in any mode I would suggest moving your cable to another port so any corruptions aren't a factor anymore. I don't think a drain will resolve anything, but I've never heard anyone mention power cycling like that.

41rw4lk said:
It's weird that it is power cycling like that. Have you tired unplugging the phone and booting? Whether it's recovery, bootloader, qboot; you need to get to one place or the other if possible because power cycling won't allow you to do anything. If you can get a stable boot in any mode I would suggest moving your cable to another port so any corruptions aren't a factor anymore. I don't think a drain will resolve anything, but I've never heard anyone mention power cycling like that.
Click to expand...
Click to collapse
Power cycling is just an assumption since regardless of whatever port its in it keeps an endless loop of connect, disconnect". Basically after rebooting the device after attempting to install the ROM is when it went black and started not doing anything other than connect, disconnect

shalpp said:
Power cycling is just an assumption since regardless of whatever port its in it keeps an endless loop of connect, disconnect". Basically after rebooting the device after attempting to install the ROM is when it went black and started not doing anything other than connect, disconnect
Click to expand...
Click to collapse
When it's trying to connect do you have a pop up on your pc showing what it sees the phone as? Does it say nash fastboot, or 9008, Z2? That might give some idea of where it's failing.

41rw4lk said:
When it's trying to connect do you have a pop up on your pc showing what it sees the phone as? Does it say nash fastboot, or 9008, Z2? That might give some idea of where it's failing.
Click to expand...
Click to collapse
It appears as Qualcomm 9008
It only starts the loop after starting a blankflash. That's about the only response I get out of the device, otherwise it does absolutely nothing, no combination of buttons do anything
Edit: Confirmed connect/disconnect on another machine with the same driver configuration

Back to emui 8.0 stock

I SPECIFICALLY TRIED THIS ON HONOR 9I RNE-L22 CANT GUARANTY IF IT WILL WORK ON OTHER DEVICES
DEFINITLY NOT FOR NOOBS
READ EVERY STEPS VERY CAREFULLY BEFORE PROCEEDING
PREREQUISITE -
Honor 9i RNE-L22
Huawei multi-tool
Brains
Link
Huawei Multi-tool
Setting up multitool before unbricking
- Simply install and the Open multitool.
- If asks for update then update the applicatin.
- Install driver from the right corner drop down menu
- then click on choose device code name select RNE and leave the rest
- the tick mark the EMUI 8
- go to misc tab
- click on run firmware finder
- once the firmware finder app is opened it may ask to update update it
- then once update is done click on Common base tab
- once in common base tab go to search field and type this RNE-L22C675 and press entre
- a list of firmware will be shown select the second one (RNE-L22C675CUSTC675D1B310 (8.0.0.310) 2.85gb
- click on file list you will get three links, copy each link one at a time and download the files with IDM(for faster download)
- Once download is complete, extract each zip file in seperate folders (folder one - Update, folder 2 - update_data_full_public,
folder 3 - update_full_RNE-L22_hw_in
- go to huawei multitool and go to unbrick tab,
- once in unbrick tab select LAUNCH HUAWEI UPDATE EXTRACTOR
- once the Update extractor app opens click on settings tab and unchek the option checksum header
- then go to unpack tab and select the UPDATE.APP file of the first folder, you will see alot of files press and hold cntrl button and
select only the files that i mention here SYSTEM.img, RAMDISK.img and RECOVERY_RAMDISK , then right click and select "
extract selected", now it will show a dialogue box to choose a folder (create a folder in desktop as Unbrick) select the folder .
- once extraction is done then again go to update extractor and now select the UPDATE.APP from the third folder and it will a lot
of files select only that i mention here CUST.img and right click and select "extract selected" choose the same folder that you
created in desktop as Unbrick.
- once the extraction is done go back to huawei multitool and to go unbrick tab and select specify folder and choose the folder
where you extracted those img file(that is the Unbrick folder from desktop)
- once folder selected on the right side there is a progress section it will show as all images are found.
- now connect your device in fastboot mode and click on the refresh icon beside device not connected it will recognise your device.
- now click on unbrick and the flash process will start.
- once it shows flash is cmplete disconect you device and restart.
VOILA u r back on EMUI 8.0
Important note
Once you boot up your device on emui you might find there are many things not working like Themes, Equilizer, VOLTE...
HA ha ha DONT PANIC there is a solution to that too..
-Now once your are in EMUI open settings and enable USB debugging
-now if u have hisuit in your computer uninstall that and restart your pc once,
-now open huawei multitool go to misc tab and click on "Installing HiSuit for DNS"
-it will download an older version and it will install, install and DO NOT UPDATE that.
-Once installation complete open hisuit and connect your device and your device will ask for ADB permission alow that and your device will connect
-now open firmware finder app and search the same firmware and right click on "filelist" and select copy
and click on dns update icon (cloud and sheet sign) there will a blank box right click there and select paste, and then click on register it will show as now you can proceed .. now click on "copy DNS to clipboard.
- Now open your pc network settings and change the current networks DNS with the one you copied and save.
- now come to hisuit and click on update it will show there is an update now proceed with the update.(It will take almost 40mis depending on your networks speed)
- WHILE UPDATING DO NOT DISCONNECT THE DEVICE. AND MAKE SURE THERE IS ATLEAST 60% CHARGE IS THERE IN YOUR DEVICE.
- now after updating is complete your device will restart and boot into STOCK EMUI
- disconnect your device
- restore your networks (DNS) to what was your networks default.
- now everything will work except VOLTE.
- AGAIN DONT PANIC ONE LAST STEP IS LEFT.
- go to about phone and check for update there you will get an official update sized around 580mb ,
proceed with the update.
VOILA you are in official EMUI stock rom.. EVERYTHING WORKS PERFECTLY FINE.
No bugs nothing.

Thanks, man. You are really helpful...
---------- Post added at 06:01 PM ---------- Previous post was at 06:00 PM ----------
Could you upload the Huawei multi tool in any other platform. Mega.nz is not responding.

Will this relock the bootloader?

Worked for me. I rebooted and everything is working. Even Bolte without performing those extra steps. Thanks @sknoman1
---------- Post added at 09:41 AM ---------- Previous post was at 09:40 AM ----------
Only bootloader is still unlocked and still getting warning message while booting

AnantNigam said:
Worked for me. I rebooted and everything is working. Even Bolte without performing those extra steps. Thanks @sknoman1
---------- Post added at 09:41 AM ---------- Previous post was at 09:40 AM ----------
Only bootloader is still unlocked and still getting warning message while booting
Click to expand...
Click to collapse
To lock bootloader.. go to the bootloader tab in multitool and there you can find an option as lock bootloader for that you will need the same unlock code that u used to unlock the bootloader in the first place.. follow the instructions which is given in the app.. its simple

hi , i forgot allow usb debugging option and wiped my rom and entered fastboot mode. my device is not detected. Do I have to wipe rom after allowing usb debugging and then enter into fastboot? And will there be any pop up coming after installing drivers? I dont get any pop up.
Device isn't get detected in fastboot mode. It gets detected when it is on. Can't understand.
In some blogs, Honor 7x and Honor 8 users posted that they got freezed at honor logo using this process. Why is that happening?
Why didn't we use vendor.img here?
I feel like im troubling u bro. sorry for that but u helped me like no one else did.

Praveen Jeykar said:
hi , i forgot allow usb debugging option and wiped my rom and entered fastboot mode. my device is not detected. Do I have to wipe rom after allowing usb debugging and then enter into fastboot? And will there be any pop up coming after installing drivers? I dont get any pop up.
Device isn't get detected in fastboot mode. It gets detected when it is on. Can't understand.
In some blogs, Honor 7x and Honor 8 users posted that they got freezed at honor logo using this process. Why is that happening?
Why didn't we use vendor.img here?
I feel like im troubling u bro. sorry for that but u helped me like no one else did.
Click to expand...
Click to collapse
Just follow every step from my tutorial and you won't have any problem.

How to unroot honor 9i?

sir my honor 9i not working
sknoman1 said:
I SPECIFICALLY TRIED THIS ON HONOR 9I RNE-L22 CANT GUARANTY IF IT WILL WORK ON OTHER DEVICES
DEFINITLY NOT FOR NOOBS
READ EVERY STEPS VERY CAREFULLY BEFORE PROCEEDING
PREREQUISITE -
Honor 9i RNE-L22
Huawei multi-tool
Brains
Link
Setting up multitool before unbricking
- Simply install and the Open multitool.
- If asks for update then update the applicatin.
- Install driver from the right corner drop down menu
- then click on choose device code name select RNE and leave the rest
- the tick mark the EMUI 8
- go to misc tab
- click on run firmware finder
- once the firmware finder app is opened it may ask to update update it
- then once update is done click on Common base tab
- once in common base tab go to search field and type this RNE-L22C675 and press entre
- a list of firmware will be shown select the second one (RNE-L22C675CUSTC675D1B310 (8.0.0.310) 2.85gb
- click on file list you will get three links, copy each link one at a time and download the files with IDM(for faster download)
- Once download is complete, extract each zip file in seperate folders (folder one - Update, folder 2 - update_data_full_public,
folder 3 - update_full_RNE-L22_hw_in
- go to huawei multitool and go to unbrick tab,
- once in unbrick tab select LAUNCH HUAWEI UPDATE EXTRACTOR
- once the Update extractor app opens click on settings tab and unchek the option checksum header
- then go to unpack tab and select the UPDATE.APP file of the first folder, you will see alot of files press and hold cntrl button and
select only the files that i mention here SYSTEM.img, RAMDISK.img and RECOVERY_RAMDISK , then right click and select "
extract selected", now it will show a dialogue box to choose a folder (create a folder in desktop as Unbrick) select the folder .
- once extraction is done then again go to update extractor and now select the UPDATE.APP from the third folder and it will a lot
of files select only that i mention here CUST.img and right click and select "extract selected" choose the same folder that you
created in desktop as Unbrick.
- once the extraction is done go back to huawei multitool and to go unbrick tab and select specify folder and choose the folder
where you extracted those img file(that is the Unbrick folder from desktop)
- once folder selected on the right side there is a progress section it will show as all images are found.
- now connect your device in fastboot mode and click on the refresh icon beside device not connected it will recognise your device.
- now click on unbrick and the flash process will start.
- once it shows flash is cmplete disconect you device and restart.
VOILA u r back on EMUI 8.0
Important note
Once you boot up your device on emui you might find there are many things not working like Themes, Equilizer, VOLTE...
HA ha ha DONT PANIC there is a solution to that too..
-Now once your are in EMUI open settings and enable USB debugging
-now if u have hisuit in your computer uninstall that and restart your pc once,
-now open huawei multitool go to misc tab and click on "Installing HiSuit for DNS"
-it will download an older version and it will install, install and DO NOT UPDATE that.
-Once installation complete open hisuit and connect your device and your device will ask for ADB permission alow that and your device will connect
-now open firmware finder app and search the same firmware and right click on "filelist" and select copy
and click on dns update icon (cloud and sheet sign) there will a blank box right click there and select paste, and then click on register it will show as now you can proceed .. now click on "copy DNS to clipboard.
- Now open your pc network settings and change the current networks DNS with the one you copied and save.
- now come to hisuit and click on update it will show there is an update now proceed with the update.(It will take almost 40mis depending on your networks speed)
- WHILE UPDATING DO NOT DISCONNECT THE DEVICE. AND MAKE SURE THERE IS ATLEAST 60% CHARGE IS THERE IN YOUR DEVICE.
- now after updating is complete your device will restart and boot into STOCK EMUI
- disconnect your device
- restore your networks (DNS) to what was your networks default.
- now everything will work except VOLTE.
- AGAIN DONT PANIC ONE LAST STEP IS LEFT.
- go to about phone and check for update there you will get an official update sized around 580mb ,
proceed with the update.
VOILA you are in official EMUI stock rom.. EVERYTHING WORKS PERFECTLY FINE.
No bugs nothing.
Click to expand...
Click to collapse
my phone is showing no os installed and cnt be able to open please help me sir and please send me your contact number

yogeshyadavv143 said:
my phone is showing no os installed and cnt be able to open please help me sir and please send me your contact number
Click to expand...
Click to collapse
did you follow the exact procedure?
if you have missed a single part that give you the exact message as no os installed

Hi guys, really sorry to ask, but how do I install Multi Tool on Mac OS? Thanks in advance!

This will work on Nova 2i? As this is same as Honor 9i.