Guide for unbricking LG L Fino from Qualcomm 9008 and LGE AndroidNet mode
I'm not responsible for any damage. You do this on your own risk
Short message from me: I searched ALL the web and found nothing needed files for unbricking L Fino so I discovered myself how to make rawprogram0.xml and finally IT WORKED!
Symtomps:
- While you connect phone to computer in device menager you have "Qualcomm HS-USB QDLoader 9008" (or similar), or probably QHSUSB BULK (or similar).
- You can't boot your device to download mode, recovery etc. Just black screen
Let's start unbricking!
Required things:
- Qualcomm mobile drivers
- QPTS
- Unbricking ROM (I made it)
- ROM for your country (if it don't exist you can download ROM for another country) - you must download it here: http://lg-phone-firmware.com/index.php?id_mod=103 (choose your ROM, look at country and model D290N, D295 or D295F)
- USB - Micro USB cable
- LG Flash Tool
Download all these files here: https://mega.nz/#F!m5MCzRJA!KFh_25WI3a13B8Ek2QpApg
_____________________________________
INSTRUCTIONS:
0. (Only if you have LGE AndroidNet mode and your phone is showing as a drive) Make a partition from empty space on that "drive". I recommend "EaseUS Partition Master" program. Then plug off phone from computer.
[Make sure that your LG L Fino is disconnected from PC]
1. First you have to disabe driver signature verification. To do that open CMD as administrator and enter these commands:
bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
Click to expand...
Click to collapse
After that restart your computer. You will have text "Test mode" on right bottom corner of desktop.
2. Unpack "LG Unbrick Tools.zip" to folder on your desktop and "DXXX UNBRICK.zip" to folder without spaces (thanks to user mountaser halak for sending me logs so I found out that QFIL doesn't correctly recognizes spaces) that is in root of the drive.
3. Install Qualcomm Driver from "LG Unbrick Tools" (You have to uninstall Qualcomm driver first - plug-in phone for this, right click on Qualcomm 9008 in device menager and uninstall) - choose your system architecture and click dpinst.exe (name will be with 32 or 64 at the end)
4. Install QPST from "LG Unbrick Tools"
5. After installing QPST open QFIL - it will be in start menu. If it won't - go to C:/Program Files (x86)/Qualcomm/QPST and open QFIL.
6. In QFIL select "Flat build". In programmer patch go to folder with "DXXX UNBRICK" files and select "prog_emmc_firehose_8x10.mbn", click on load XML and select files that will be showed. Or look at the attachment
7. NOW Plug-in USB cable to your computer.
8. Remove the battery from your LG and wait 3 seconds. Insert the battery again. Plug USB to your phone, wait about 3 seconds and click DOWNLOAD button on PC.
(notice that download in this case doesn't mean download something from internet. It mean "(down) load firmware from computer to phone")
9. Wait to complete process. (It will take about 10 minutes) If you get error try put D290N Unbrick files folder directly on disk (I prefer on another partition)
10. Disconnect LG from PC, remove and insert the battery. If phone is discharged, charge it with a normal charger to 4-5%.
11. NOW you can turn on LG L Fino to check if phone works.
After that LG L Fino will have many bugs and do factory reset in every reboot. To avoid this we will flash LG with Download Mode. I prefer charge phone to min. 20%
To enter download mode turn off device and plug-in USB cable to phone while holding Volume Up button.
After that, follow this tutorial (I prefer selecting CSE flash)
If Flash Tool doesn't work properly try on another PC or install clean Windows on another partition and run it on it.
After all done you can enable "Driver signature verification" again to delete "Test mode" text on desktop. Just open CMD as administrator and enter command:
bcdedit -set TESTSIGNING OFF
Click to expand...
Click to collapse
Issues:
- IMEI is setting to 0 after every ROM flashing. It can be changed with this Xposed module: https://play.google.com/store/apps/details?id=com.phoneinfo.changer
- Problems with boot into a custom ROM (maybe only me have this problem)
- 3G don't working (or only I have this problem)
- List of languages is strange
If you found other issues tell me about them
I hope I helped many people! This is the first real tutorial for unbricking L Fino from this mode! If you want donate contact me [email protected] !
PS: I have 13 years If you found any mistakes tell me about it. Sorry for them in the poll (I can't edit them)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried to do what the instructions say, but when I try to press the "download" button, it doesn't let me, because of no port selected. when i select a port (wich is the one my lg is connected) it let's me download but gives me "failed to switch to emergency download mode"
---------- Post added at 23:41 ---------- Previous post was at 23:15 ----------
Also when i plug in my phone, it installs a "relink hs-usb qdloader 9008" driver, how do I prevent this?
I tried to preven the relink driver by disconnecting my computer from the internet, and reinstalling the qualcomm driver, and it worked. the program reconized it properly. but when i click download it hangs in the "use verbose mode: false" stage
can you make a detailed video?
Thanks. Gonna try this when I get home.
pedrofrade332 said:
I tried to preven the relink driver by disconnecting my computer from the internet, and reinstalling the qualcomm driver, and it worked. the program reconized it properly. but when i click download it hangs in the "use verbose mode: false" stage
can you make a detailed video?
Click to expand...
Click to collapse
I really want to help you, but I don't know why you get this error... Do you have text "Switching to firehose" and under "Wait for 3 seconds"?
PS: I had only ONE chance to test this... Because when my L Fino did fix with this method I don't want to brick it and test again...
I looked to my record from unbricking and I too have "Use Verbose : False" but it continued downloading...
Try putting the D290N UNBRICK directly on disc (best on another partition if you have it)
EDIT: I think I know why you have this problem. I forgot about disabling integrity checks and driver test mode. I'm going to edit post!
EDIT 2: I added this very important point. Look at first point
DavRei said:
I looked to my record from unbricking and I too have "Use Verbose : False" but it continued downloading...
Try putting the D290N UNBRICK directly on disc (best on another partition if you have it)
EDIT: I think I know why you have this problem. I forgot about disabling integrity checks and driver test mode. I'm going to edit post!
EDIT 2: I added this very important point. Look at first point
Click to expand...
Click to collapse
How do you know it's still downloading? (btw does it require internet, because after I did what you told me to, I still get the "RELINK Qualcomm Driver thing")
---------- Post added at 00:56 ---------- Previous post was at 00:47 ----------
I think i managed to fix the RELINK thing. But even with internet connection it just hangs at this stage and the task manager shows no activity by the application
Unable to unbrick D295 L Fino
Hi, I have D295 L Fino in 9008 mode and I tried to unbrick it by following your guide, but was unable to unbrick it. I get the below error in QFIL UI. Can you please make Unbricking Rom for D295, it probably failed as I used the files you have for D290N.
Code:
14:03:24: INFO: TARGET SAID: 'Read back verify failed at sector 797950132,num sectors 2609848'
14:03:24: INFO: TARGET SAID: 'Finished sector address 2609848'
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
14:03:24: {ERROR: Please see log}
Thank you,
Himanshu
himanshuganatra said:
Hi, I have D295 L Fino in 9008 mode and I tried to unbrick it by following your guide, but was unable to unbrick it. I get the below error in QFIL UI. Can you please make Unbricking Rom for D295, it probably failed as I used the files you have for D290N.
Code:
14:03:24: INFO: TARGET SAID: 'Read back verify failed at sector 797950132,num sectors 2609848'
14:03:24: INFO: TARGET SAID: 'Finished sector address 2609848'
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
14:03:24: {ERROR: Please see log}
Thank you,
Himanshu
Click to expand...
Click to collapse
Why don't people read the whole thread before they post questions? This is a D290N guide only!!!!!!! Not D295
pedrofrade332 said:
Why don't people read the whole thread before they post questions? This is a D290N guide only!!!!!!! Not D295
Click to expand...
Click to collapse
I know I missed it, but I did read the whole forum before posting it here and requested to make Unbricking Rom for D295 (if you have read my whole reply).
Hi.
I followed the manual step by step. But I fail to make the process appear.
Download Fail: Sahara Fail: Fail QSaharaServer: Process fail
How can I solve that?
Thank you.
pedrofrade332 said:
Why don't people read the whole thread before they post questions? This is a D290N guide only!!!!!!! Not D295
Click to expand...
Click to collapse
He actually knows that it is for D290N only, but he tried to do this on D295
virushadow said:
Hi.
I followed the manual step by step. But I fail to make the process appear.
Download Fail: Sahara Fail: Fail QSaharaServer: Process fail
How can I solve that?
Thank you.
Click to expand...
Click to collapse
Did you click "download" fast after plugging-in phone? If you get this error again click download second time (or third). Tell me if you still have this error.
EDIT1: Program have to swith to Firehose (this must be in log) just follow those steps.
virushadow said:
Hi.
I followed the manual step by step. But I fail to make the process appear.
Download Fail: Sahara Fail: Fail QSaharaServer: Process fail
How can I solve that?
Thank you.
Click to expand...
Click to collapse
Ive got rid of that problem by holding "volume up" button, but then i encountered pedrofrade322 problem
DavRei said:
Did you click "download" fast after plugging-in phone? If you get this error again click download second time (or third). Tell me if you still have this error.
EDIT1: Program have to swith to Firehose (this must be in log) just follow those steps.
Click to expand...
Click to collapse
It switched to firehose, yes. But it stays on the "verbose" thing for a long time, and the status bar doesn't move or present the blue color that it should. And no, I didn't click the "download" button too fast. I waited 3 seconds or more between each step
---------- Post added at 17:19 ---------- Previous post was at 17:17 ----------
Czopczyslaw said:
Ive got rid of that problem by holding "volume up" button, but then i encountered pedrofrade322 problem
Click to expand...
Click to collapse
You resolved what problem by holding the volume up?
Ehh, I mean you have to click download fast after plugging-in
EDIT: OHH SORRY you missed that I quoted another person
DavRei said:
Did you click "download" fast after plugging-in phone? If you get this error again click download second time (or third). Tell me if you still have this error.
EDIT1: Program have to swith to Firehose (this must be in log) just follow those steps.
Click to expand...
Click to collapse
I did not connect fast, I hope it finds it. I tried it 4 times in a row and still gives the same problem.
---------- Post added at 07:34 PM ---------- Previous post was at 07:30 PM ----------
Czopczyslaw said:
Ive got rid of that problem by holding "volume up" button, but then i encountered pedrofrade322 problem
Click to expand...
Click to collapse
When I have to press vol up?
After the error appears?
DavRei said:
Ehh, I mean you have to click download fast after plugging-in
EDIT: OHH SORRY you missed that I quoted another person
Click to expand...
Click to collapse
It is stuck at this stage...for over an hour
Try completely uninstall QPST 2.7 and install it with "driver test mode" enabled (Do you have "test mode" in corner of your desktop?)
Related
How To UnBrick A Hard Bricked Moto X
Hii , First of all I wanna thanks to this awesome scrpit by @s5610 who brought my phone from dead to alive , I think i am the first guy to unbricked the hardbricked phone using this script lol , My phone was hardbricked because i was testing my kernel and entered wrong path in partition due to which i got hard bricked i was worried for my phone , Service Center was asking for 7k in Indian Rupees , i was hopeless then i gave a try to this method , followed all steps written here and then finally i entered to fastboot menu of 30.B7 Kitkat As i was using 30.B7 Bootloader earlier and then i flashed My gpt.bin and S-partition and flashed my stock rom voilla !! and my phone booted the aim was to share this post was this method was on page 42 and only less guys have seen this post , so i created a new thread regarding this
All Credits Goes to - @s5610
s5610 said:
Unbricking Guide for any Moto X Gen 1 (wire trick)
Download, and unpack supplied zip to any disk, C: or D:, in root folder. Install driver by launching Qusb.drv.inst.msi, then open Windows' Device Manager, and see if you got "Qualcomm HS-USB QDLoader 9008" device (it is "QHSUSB_DLOAD" without driver installed) located in "COM & LPT ports" section.
If yes, you see it, go to software part below. If it's not there, a full disassemble of the phone is needed to get close to back side of motherboard (google for "iFixit Teardown Moto X Guide" for step-by-step instruction).
So, when you are inside, disconnect the battery first. No need to pull it out, it's glued. Now get to back side of motherboard, and very very gently gain access to the lower left corner of ARM+DRAM shield (see picture). I've done it with Stanley knife. Also you can use miniature nippers - but very carefuly! Once you get access to inner space of shield, use tiny wire to short special pin to the ground (see picture), then connect USB cable, and in the moment when you see "QHSUSB_DLOAD" device (or "Qualcomm HS-USB QDLoader 9008" if driver is installed) pop out in Windows' Device Manager, quickly remove the wire. The goal is to have "Qualcomm HS-USB QDLoader 9008" in "COM & LPT ports" section of Device Manager. If it is achieved, we are done with hardware, and move on to soft part.
Now software part. Go to unzipped C:\Python27 folder, launch bat-file, and wait until finish:
RUN_blank_bootloader_flash.bat
(if you got error like "No data read from USB..." etc, just skip to next step)
Next launch either
- .Boot_KK_4.4.2_B4.exe,
or .Boot_KK_4.4.4_B7.exe,
or .Boot_LP_5.0.2_BC.exe,
or .Boot_LP_5.1.0_BD.exe,
or .Boot_LP_5.1.0_BE.exe
- depends on Android version your phone has last time. If you don't know what you need, begin with first one.
Wait 10 seconds, then launch next bat-file, and wait until finish:
RUN_moto_x_bootloader_flash.bat
Phone should go into fastboot mode! If it doesn't, repeat previous step trying higher version. But don't try to flash BC, BD, and BE, if you didn't install Lollipop on this phone!
OK. Disconnect the USB cable, connect the battery, connect again USB cable (fastboot don't work, if don't see battery). Launch next bat-file:
RUN_gpt.bin_flash.bat
The phone will get in fastboot, ready to be flashed by appropriate firmware. If it is official RSD (SBF), delete from xml strings consisting gpt.bin and motoboot.img for safe flashing.
...
Download link: http://www.mediafire.com/download/3e38rr3wy28s071/Moto.X.Unbrick.zip
This guide was brought to you by s5610
Links that this guide is based on (where I took files and general idea):
http://forum.xda-developers.com/droid-ultra/general/droid-ultra-maxx-brick-recovery-t2830806
http://forum.xda-developers.com/mot...-moto-x-t2629057[/url[/QUOTE][/QUOTE][/QUOTE]
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Not sure if additional thread is necessary )
UPDATED
The best resurrection method for Moto X is here.
Can Someone re-upload that file? Thanx!
Please upload the mediafire link...
Plz plz.. I have bricked my phone. It seems that this procedure will work for me. Please upload and save my life.
even i have bricked my moto x...need a working download link..please.
https://drive.google.com/file/d/0B3EDzuzDCakzdWxHa2RWVDJhRXc/view?usp=sharing
Cannot install qsub.drv.inst.msi on my windows 10...says failed to attribute and failed to delete qcusbser.sys.
Thanks
Can we write the full firmware through Qload 9008 mode ???
HI I have a question. I bricked my gf's phone while trying to unlock the bootloader and I am not able to turn the phone on. Only positive feedback is that when I plug it in to the computer, I can hear a notification on my computer. I followed your guide. I can see the "Qualcomm HS-USB QDLoader 9008" device (it is "QHSUSB_DLOAD" without driver installed) located in "COM & LPT ports" section.
Then I followed your software instructions. When I run the RUN_blank_bootloader_flash.bat, I get the following
Code:
Starting qflash!
Executing command qflash.exe -com3 -ramload MPRG8960.hex -mbn 33 MSM8960_bootloa
der_singleimage.bin -v -o
Motorola qflash Utility version 1.3
qflash - com3 is an invalid port
Invalid COM port enteredBlank flashing successful
Device will now enumerate in fastboot mode
Then, I followed the rest of the instructions by trying each .Boot .exe and waitng 10 seconds and finally with RUN_moto_x_bootloader_flash
but I am getting the following error.
Code:
C:\Users\cxx\Desktop\Python27>python qdload.py MPRG8960.bin -ptf _boot\partiti
ons.txt -pt
QDLoad utility version 1.2 (c) VBlack 2014
Found TTY port: com3
Traceback (most recent call last):
File "qdload.py", line 815, in <module>
main()
File "qdload.py", line 762, in main
tty = openTTY(args.ttyPort)
File "qdload.py", line 174, in openTTY
tty = serial.Serial(port=tty_path, baudrate=115200)
File "C:\Python27\lib\site-packages\serial\serialwin32.py", line 38, in __init
__
SerialBase.__init__(self, *args, **kwargs)
File "C:\Python27\lib\site-packages\serial\serialutil.py", line 282, in __init
__
self.open()
File "C:\Python27\lib\site-packages\serial\serialwin32.py", line 66, in open
raise SerialException("could not open port %r: %r" % (self.portstr, ctypes.W
inError()))
serial.serialutil.SerialException: could not open port 'com3': WindowsError(2, '
The system cannot find the file specified.')
C:\Users\cxx\Desktop\Python27>pause
Press any key to continue . . .
please help.
Thanks.
Device Shows As USB Input
Hey all,
I'm having trouble getting my Windows 7 machine to recognize my XT862 as a QHSUSB device. Windows does recognize it, just as a "USB Input Device" -- very generic, I know -- so I don't think I have to do any motherboard hacks (and I sure hope not!). However, as it won't let me update the driver either, so I can't do anything. Also, when I plug it into my Mac, it does pop up as a Qualcomm Composite Device. Since something's obviously still ticking, where did I go wrong?
Thanks
shengslogar said:
Hey all,
I'm having trouble getting my Windows 7 machine to recognize my XT862 as a QHSUSB device. Windows does recognize it, just as a "USB Input Device" -- very generic, I know -- so I don't think I have to do any motherboard hacks (and I sure hope not!). However, as it won't let me update the driver either, so I can't do anything. Also, when I plug it into my Mac, it does pop up as a Qualcomm Composite Device. Since something's obviously still ticking, where did I go wrong?
Thanks
Click to expand...
Click to collapse
Put it on a charger for 5-6 hrs and see if that will help.I had this same problem but on a Moto G and charging it up helped.
liveroy said:
Put it on a charger for 5-6 hrs and see if that will help.I had this same problem but on a Moto G and charging it up helped.
Click to expand...
Click to collapse
Will do! I think I did try charging it awhile ago, but I'll give it another shot.
can my phone be unbricked?? here is the error log:
RAMLOADER VERSION: PBL_DloadVER2.0
------------------------------------------------------
DEVICE INFORMATION:
------------------------------------------------------
Version : 0x8
Min Version : 0x1
Max Write Size: 0x600
Model : 0x90
Device Size : 0
Description : Intel 28F400BX-TL or Intel 28F400BV-TL
------------------------------------------------------
Using passed in packet size, changing from 0x600 -> 0x600
EXTENDED_LINEAR_ADDRESS_REC @ 0x2a000000
Write 65536 bytes @ 0x2a000000
100EXTENDED_LINEAR_ADDRESS_REC @ 0x2a010000
Write 11840 bytes @ 0x2a010000
100START_LINEAR_ADDRESS_REC @ 0x2a000000
EOF_REC
Sleeping for 3s
sdl_hello() - Invalid response: 7e030003331b7e
sdl_hello() - This is a NAK response from ROM code, which means the device has
een reset back to blank flash mode. Usually this is caused by power supply issu
s. Please try again with battery eliminator if it persists
Unexpected target reset, bailing out after 2 retries
I am trying to install the drivers and it will show up as qhsusb_dload for about 5 seconds then reverts back to Relink HS USB QDloader 9008. Should i try the wire trick? It will say that the Qhsusb drivers are installed but always changes.
Hello,
i have a locked Bootloder with twrp and can't boot the Phone.
The device wan't to reset the storage but TWRP is not booting.
http://forum.xda-developers.com/oneplus-3t/help/oneplus-3t-factory-restore-utility-t3511287
Hey, I uploaded the Unbrick Tool for the Oneplus 3T with the drivers! Hope I can help you out.
I cant send Links in here, becouse im a newbie.... so, contact me Privat.
Step 1 :- Extract Drivers and Recovery Tool files on Desktop.
Step 2 : If you are using Windows other than Windows XP,turn off Driver Signature Enforcement.To do so,follow this guide :
Step 3 :- Press the power button for 40 seconds to turn off the phone.
Step 4 :- Press only volume up button for 10 seconds and while keeping it pressed,connect your phone to PC.Keep volume up pressed till your device shows in device manager as [Unknown Device,QHUSB_BULK (under Unknown Devices) or Qualcomm HS USB ...... (under COMs and Ports)].
Step 5 :- Right Click on your device in the device manager and select Update Device Software. Choose the .inf file manually from x86 or x64 folder as the case implies and select Qualcomm 9008 from the listed devices
Step 6 :- When the device shows as Qualcomm 9008 ,go to the extracted Recovery Package and run the MSM Download Tool as administrator.
Step 7 :- Click start at top left corner and wait for it to finish (green text will come).
Step 8 :- Disconnect phone from PC and boot into system.
Works great with my OP3T
Best wishes,
Lloyd Smallwood
Everything works great, Thanks
Is me first Phone with the new security features, on me old Note 2 everything was easier.
can i have the link? Please i need it
hachamacha said:
http://forum.xda-developers.com/oneplus-3t/help/oneplus-3t-factory-restore-utility-t3511287
Click to expand...
Click to collapse
i have the same problem
swowdi said:
i have the same problem
Click to expand...
Click to collapse
I'm lost. What are you asking for that isn't in that quote or this thread? The link to .. . ?
martinklaus said:
Hello,
i have a locked Bootloder with twrp and can't boot the Phone.
The device wan't to reset the storage but TWRP is not booting.
Click to expand...
Click to collapse
Driver: https://mega.nz/#!AgohmbqC!h16GeeOnlvubYDyfID3feY-qVJuBZiWVvYsXSAeKIA8
Unbricktool: https://mega.nz/#!Q1YnTTAT!gnLf6NEkSRy7W-WY8J0H2SmJJLzO91-vReKx7B1VVpI[/QUOTE]
I tried to use the tool, but when I click start says it downloads Fire Hose binary and then says that Sahara Communication failed, I can't unbrick my device
UckTay said:
I tried to use the tool, but when I click start says it downloads Fire Hose binary and then says that Sahara Communication failed, I can't unbrick my device
Click to expand...
Click to collapse
If the steps not working you can ask the OnePlus Support and one guy make it in a remote session for you.
martinklaus said:
If the steps not working you can ask the OnePlus Support and one guy make it in a remote session for you.
Click to expand...
Click to collapse
You can use my tool:
Hey, I uploaded the Unbrick Tool for the Oneplus 3T with the drivers! Hope I can help you out.
Driver: https://mega.nz/#!AgohmbqC!h16GeeOnl...iWVvYsXSAeKIA8
Unbrick Tool: https://mega.nz/#!Q1YnTTAT!gnLf6NEkS...1-vReKx7B1VVpI
Step 1 :- Extract Drivers and Recovery Tool files on Desktop.
Step 2 : If you are using Windows other than Windows XP,turn off Driver Signature Enforcement.To do so,follow this guide :
http://www.howtogeek.com/167723/how....igned-drivers/
Step 3 :- Press the power button for 40 seconds to turn off the phone.
Step 4 :- Press only volume up button for 10 seconds and while keeping it pressed,connect your phone to PC.Keep volume up pressed till your device shows in device manager as [Unknown Device,QHUSB_BULK (under Unknown Devices) or Qualcomm HS USB ...... (under COMs and Ports)].
Step 5 :- Right Click on your device in the device manager and select Update Device Software. Choose the .inf file manually from x86 or x64 folder as the case implies and select Qualcomm 9008 from the listed devices
Step 6 :- When the device shows as Qualcomm 9008 ,go to the extracted Recovery Package and run the MSM Download Tool as administrator.
Step 7 :- Click start at top left corner and wait for it to finish (green text will come).
Step 8 :- Disconnect phone from PC and boot into system.
Works great with my OP3T
Don't forget to Thank!
PayPal: www.paypal.me/harisscoot
Best wishes,
Lloyd Smallwood
LloydSmallwood said:
You can use my tool:
Hey, I uploaded the Unbrick Tool for the Oneplus 3T with the drivers! Hope I can help you out.
Driver: https://mega.nz/#!AgohmbqC!h16GeeOnl...iWVvYsXSAeKIA8
Unbrick Tool: https://mega.nz/#!Q1YnTTAT!gnLf6NEkS...1-vReKx7B1VVpI
Step 1 :- Extract Drivers and Recovery Tool files on Desktop.
Step 2 : If you are using Windows other than Windows XP,turn off Driver Signature Enforcement.To do so,follow this guide :
http://www.howtogeek.com/167723/how....igned-drivers/
Step 3 :- Press the power button for 40 seconds to turn off the phone.
Step 4 :- Press only volume up button for 10 seconds and while keeping it pressed,connect your phone to PC.Keep volume up pressed till your device shows in device manager as [Unknown Device,QHUSB_BULK (under Unknown Devices) or Qualcomm HS USB ...... (under COMs and Ports)].
Step 5 :- Right Click on your device in the device manager and select Update Device Software. Choose the .inf file manually from x86 or x64 folder as the case implies and select Qualcomm 9008 from the listed devices
Step 6 :- When the device shows as Qualcomm 9008 ,go to the extracted Recovery Package and run the MSM Download Tool as administrator.
Step 7 :- Click start at top left corner and wait for it to finish (green text will come).
Step 8 :- Disconnect phone from PC and boot into system.
Works great with my OP3T
Don't forget to Thank!
PayPal: www.paypal.me/harisscoot
Best wishes,
Lloyd Smallwood
Click to expand...
Click to collapse
what is decrypton key
Gautamgzb2 said:
what is decrypton key
Click to expand...
Click to collapse
Go on my thread, there are the currect links.
https://forum.xda-developers.com/on...oneplus-3t-t3515306/post70653711#post70653711
UckTay said:
I tried to use the tool, but when I click start says it downloads Fire Hose binary and then says that Sahara Communication failed, I can't unbrick my device
Click to expand...
Click to collapse
I am having the same prob bro,,,How did you solved the prob?
Hi Guys,
I think I have no lucky these days...
I was testing a new ROM and when a returned the backup with TWRP android asked me a patteren for unlock.
The patter I usauly use didnt work.
I found a help that say to erase some files in /data/system but it didnt work...
I had a idea to block the cell with my google account and set a new PIN for unlock... It didnt work too...
Now I have the cell blocked by google and its impossible to access the internal memory with TWRP...
I need help... I dont know what to do...
Please !!!!
LloydSmallwood said:
You can use my tool:
Hey, I uploaded the Unbrick Tool for the Oneplus 3T with the drivers! Hope I can help you out.
Driver: https://mega.nz/#!AgohmbqC!h16GeeOnl...iWVvYsXSAeKIA8
Unbrick Tool: https://mega.nz/#!Q1YnTTAT!gnLf6NEkS...1-vReKx7B1VVpI
Step 1 :- Extract Drivers and Recovery Tool files on Desktop.
Step 2 : If you are using Windows other than Windows XP,turn off Driver Signature Enforcement.To do so,follow this guide :
http://www.howtogeek.com/167723/how....igned-drivers/
Step 3 :- Press the power button for 40 seconds to turn off the phone.
Step 4 :- Press only volume up button for 10 seconds and while keeping it pressed,connect your phone to PC.Keep volume up pressed till your device shows in device manager as [Unknown Device,QHUSB_BULK (under Unknown Devices) or Qualcomm HS USB ...... (under COMs and Ports)].
Step 5 :- Right Click on your device in the device manager and select Update Device Software. Choose the .inf file manually from x86 or x64 folder as the case implies and select Qualcomm 9008 from the listed devices
Step 6 :- When the device shows as Qualcomm 9008 ,go to the extracted Recovery Package and run the MSM Download Tool as administrator.
Step 7 :- Click start at top left corner and wait for it to finish (green text will come).
Step 8 :- Disconnect phone from PC and boot into system.
Works great with my OP3T
Don't forget to Thank!
PayPal: www.paypal.me/harisscoot
Best wishes,
Lloyd Smallwood
Click to expand...
Click to collapse
Hi, I followed all the steps and how you can see I have the Qualcomm 9008 in the list
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
but when I run the recovery package nothing happens and the device is not displayed in the list, why?
EDIT: I did wrong the step 4 "Press the volume up button for 10 seconds", I pressed the volume up and the power button together this is why it didn't work
brekane said:
EDIT: I did wrong the step 4 "Press the volume up button for 10 seconds", I pressed the volume up and the power button together this is why it didn't work
Click to expand...
Click to collapse
Your not the first to do this, coming from owning a Mediatek device/phone, it makes sense as that's exactly the same way the recovery works on those phones. ?
i did everything but...
I installed the MSMdownload to my 3t, removed it from my pc and booted it but for some reason it wont boot or connect to my PC anymore. can you please help. thanks
Hi all!
I am trying to flash QFIL file to my Nokia 7 plus (TA-1046), but with no success because the Qualcomm driver is not installed automatically.
I have the 1.0 Qualcomm driver collection installed, but when I plugin my phone in download mode, I see it appear in device manager under "other devices" as "Android". I can update the driver to any other Qualcomm driver, but I don't know which one to choose. I tried the "QDLoader 9008" and it installs fine, but in QFIL.exe I can't flash my phone. I still get sahara errors.
What driver (type number) do I need to install to connect my phone's interface (download mode)?
EDIT:
Forgot to mention the obvious, it's Windows 7...
sbsoft said:
Hi all!
I am trying to flash QFIL file to my Nokia 7 plus (TA-1046), but with no success because the Qualcomm driver is not installed automatically.
I have the 1.0 Qualcomm driver collection installed, but when I plugin my phone in download mode, I see it appear in device manager under "other devices" as "Android". I can update the driver to any other Qualcomm driver, but I don't know which one to choose. I tried the "QDLoader 9008" and it installs fine, but in QFIL.exe I can't flash my phone. I still get sahara errors.
What driver (type number) do I need to install to connect my phone's interface (download mode)?
EDIT:
Forgot to mention the obvious, it's Windows 7...
Click to expand...
Click to collapse
When you install QPST Too,l all qualcomm drivers are installed to your pc. if your device is not detected by your pc try restarting your pc. if restart not working the. open device manager and search for unknown device then install driver manually.
sarath medithi said:
When you install QPST Too,l all qualcomm drivers are installed to your pc. if your device is not detected by your pc try restarting your pc. if restart not working the. open device manager and search for unknown device then install driver manually.
Click to expand...
Click to collapse
Thanks for your reply!
I did all you said (incl installing QPST tool), but still see "Android" under "Unknown devices". It is not recognized at all by Windows.
I want to install manually, but don't know which driver to choose from. I see a list of about 50 Qualcomm port drivers (MSM xxxx, QDLoader xxxx, Diagnostics xxxx), so which one is the correct one? What do you see under your "Ports (COM and LPT)" in device manager when you connect your phone in download mode?
QFIL Flashing Procedure
sbsoft said:
Thanks for your reply!
I did all you said (incl installing QPST tool), but still see "Android" under "Unknown devices". It is not recognized at all by Windows.
I want to install manually, but don't know which driver to choose from. I see a list of about 50 Qualcomm port drivers (MSM xxxx, QDLoader xxxx, Diagnostics xxxx), so which one is the correct one? What do you see under your "Ports (COM and LPT)" in device manager when you connect your phone in download mode?
Click to expand...
Click to collapse
Please confirm your qfil version.
Tool frome here:
https://aiomobilestuff.com/download-...st-flash-tool/
Drivers from here:
http://www.mediafire.com/file/j3g88d...r+V1.1.0.0.rar
Steps to flash the phone
Step1: To use QPST, some drivers need to be installed on your Computer.
Note: While installing driver avoid using cable for successful installation.
When Drivers installed, Attach Phone to PC via USB cable.
While connecting to PC, phone should be switched off and press volume up & down as boot key.
If it Create Qualcomm HS-USB QDLoader 9008 port in device manager , then driver has been successfully installed.
Once driver installation is complete, follow the instructions below to flash the MBN firmware file to your Qualcomm device.
Step 2. Make sure your device is charged to at least 30%.
Step 3. Run QFIL tool.
Step 4. Now Browse under the Programmer path to Chose the B2N-0-132E-prog_emmc_ufs_firehose_Sdm660_ddr.elf File.
Step 5. As soon as the elf file is selected, Select Build will automatically select the Update or Stock ROM.
Step 6. Next Go To Load XML, selectB2N-0-132E-rawprogram0.xml and Select B2N-0-132E-patch0.xml
Step 7. Turn off the Phone and Attach it to PC by pressing Vol up & down button.
Step 8. Click on Select Port and choose the port.
Step 9. Click on Download to start flashing.
Step 10. Disconnect device from USB cable once Finish Download appears.
That’s all!
Hit thanks button if you find this helpful
Happy flashing
Note: If you get the Sahara Errors Place Firmware folder in QFIL\Bin folder. Check whether programmer file is available in your firmware folder. It is an elf file (B2N-0-132E-prog_emmc_ufs_firehose_Sdm660_ddr.elf). Use recent version of QPST. earler versions cant flash .elf programmers.
sarath medithi said:
Please confirm your qfil version.
Tool frome here:
https://aiomobilestuff.com/download-...st-flash-tool/
Drivers from here:
http://www.mediafire.com/file/j3g88d...r+V1.1.0.0.rar
Steps to flash the phone
Step1: To use QPST, some drivers need to be installed on your Computer.
Note: While installing driver avoid using cable for successful installation.
When Drivers installed, Attach Phone to PC via USB cable.
While connecting to PC, phone should be switched off and press volume up & down as boot key.
If it Create Qualcomm HS-USB QDLoader 9008 port in device manager , then driver has been successfully installed.
Once driver installation is complete, follow the instructions below to flash the MBN firmware file to your Qualcomm device.
Step 2. Make sure your device is charged to at least 30%.
Step 3. Run QFIL tool.
Step 4. Now Browse under the Programmer path to Chose the B2N-0-132E-prog_emmc_ufs_firehose_Sdm660_ddr.elf File.
Step 5. As soon as the elf file is selected, Select Build will automatically select the Update or Stock ROM.
Step 6. Next Go To Load XML, selectB2N-0-132E-rawprogram0.xml and Select B2N-0-132E-patch0.xml
Step 7. Turn off the Phone and Attach it to PC by pressing Vol up & down button.
Step 8. Click on Select Port and choose the port.
Step 9. Click on Download to start flashing.
Step 10. Disconnect device from USB cable once Finish Download appears.
That’s all!
Hit thanks button if you find this helpful
Happy flashing
Note: If you get the Sahara Errors Place Firmware folder in QFIL\Bin folder. Check whether programmer file is available in your firmware folder. It is an elf file (B2N-0-132E-prog_emmc_ufs_firehose_Sdm660_ddr.elf). Use recent version of QPST. earler versions cant flash .elf programmers.
Click to expand...
Click to collapse
Thanks for your replay!
I did all you said and I think the driver is now installed correctly. Only problem that remains is the locked bootloader, which is preventing flashing.
I have tried to disable it by "fastboot oem unlock", but no success, because access is denied. (I have enabled OEM unlock in dev options).
QFIL keeps reporting me "100 Unable to connect to port". Sahara is not an issue anymore (I guess).
Do I really need to unlock bootloader to flash the elf?
EDIT: I've read another article on XDA that states that Nokia devices cannot be flashed???
sbsoft said:
Thanks for your replay!
I did all you said and I think the driver is now installed correctly. Only problem that remains is the locked bootloader, which is preventing flashing.
I have tried to disable it by "fastboot oem unlock", but no success, because access is denied. (I have enabled OEM unlock in dev options).
QFIL keeps reporting me "100 Unable to connect to port". Sahara is not an issue anymore (I guess).
Do I really need to unlock bootloader to flash the elf?
EDIT: I've read another article on XDA that states that Nokia devices cannot be flashed???
Click to expand...
Click to collapse
QFIL don't need unlocked bootloader as it uses EDL Mode for flashing. I suggest you to change the usb port and try with another data cable.
---------- Post added at 12:13 PM ---------- Previous post was at 12:12 PM ----------
sbsoft said:
Thanks for your replay!
I did all you said and I think the driver is now installed correctly. Only problem that remains is the locked bootloader, which is preventing flashing.
I have tried to disable it by "fastboot oem unlock", but no success, because access is denied. (I have enabled OEM unlock in dev options).
QFIL keeps reporting me "100 Unable to connect to port". Sahara is not an issue anymore (I guess).
Do I really need to unlock bootloader to flash the elf?
EDIT: I've read another article on XDA that states that Nokia devices cannot be flashed???
Click to expand...
Click to collapse
can you share the qfil log or screenshot
sarath medithi said:
QFIL don't need unlocked bootloader as it uses EDL Mode for flashing. I suggest you to change the usb port and try with another data cable.
---------- Post added at 12:13 PM ---------- Previous post was at 12:12 PM ----------
can you share the qfil log or screenshot
Click to expand...
Click to collapse
Here we go:
(I have Dutch language version of Windows 7, so no English in some pictures)
1. The driver is installed correctly and working fine. (I need to boot Windows in testsigning mode with no driver signature checking, because the driver is not signed correctly?)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Phone is in Download mode.
When I click Download in QFIL, this is the output and nothing happens.
The configuration of QFIL looks like this:
Is this enough for you? If not, please let me know. I am starting to get headaches of this problem...
Thanks!
sbsoft said:
Here we go:
(I have Dutch language version of Windows 7, so no English in some pictures)
1. The driver is installed correctly and working fine. (I need to boot Windows in testsigning mode with no driver signature checking, because the driver is not signed correctly?)
Phone is in Download mode.
When I click Download in QFIL, this is the output and nothing happens.
The configuration of QFIL looks like this:
Is this enough for you? If not, please let me know. I am starting to get headaches of this problem...
Thanks!
Click to expand...
Click to collapse
Try to update your QFIL.i think there is a new version available. update it and try again. may be it is giving an error due to the programmer file which is an elf file. earlier it is .mbn or .bin file. hope you understand.
Did you succede in using QFIL ? @sbsoft
*Mine doesn't have to testpoint ( my computer auto recognize it as HS-USB QDLoader 9008), if you don't then search google for testpoint)
First make it to identify as edl mode on your computer (HS-USB QDLoader 9008)
next open the image file of the rom(extract from tgz file )
replace it with this file :" prog_emmc_firehose_Sdm660_ddr.elf " ( search google for this file)
important: only" prog_emmc_firehose_Sdm660_ddr.elf " not prog_emmc_firehose_Sdm660_lite.elf
then flash it by miflash.
if you have error then read this:
( first my computer did identify but mi flash didn't, it just show error: " cannot receive hello packet " so i try to open the back of the phone, unplug the battery connector, next plug it back and now it work. Then just flash it )
where is prog file bro ???
Is that method bring back to DELETED EFS partition (IMEI, MEID, etc.) ?
Kaikhung said:
*Mine doesn't have to testpoint ( my computer auto recognize it as HS-USB QDLoader 9008), if you don't then search google for testpoint)
First make it to identify as edl mode on your computer (HS-USB QDLoader 9008)
next open the image file of the rom(extract from tgz file )
replace it with this file :" prog_emmc_firehose_Sdm660_ddr.elf " ( search google for this file)
important: only" prog_emmc_firehose_Sdm660_ddr.elf " not prog_emmc_firehose_Sdm660_lite.elf
then flash it by miflash.
if you have error then read this:
( first my computer did identify but mi flash didn't, it just show error: " cannot receive hello packet " so i try to open the back of the phone, unplug the battery connector, next plug it back and now it work. Then just flash it )
Click to expand...
Click to collapse
Hi,
My phone is hard brick too. I have some questiong about you solution:
1) which version of miFlash that you are using?
2) Do you remove the "mi" folder in your miFlash folder?
3) which "prog_emmc_firehose_Sdm660_ddr.elf" that you are using (there are many file on google)?
4) while you unplug the battery connector, is EDL mode still connected?
5) while you plug back the batterry connector, is EDL mode still connected?
Sorry for asking these questions, but I tried so many guide like this. And my phone still hard bricked
hardbrick solution
angelline2005 said:
Hi,
My phone is hard brick too. I have some questiong about you solution:
1) which version of miFlash that you are using?
2) Do you remove the "mi" folder in your miFlash folder?
3) which "prog_emmc_firehose_Sdm660_ddr.elf" that you are using (there are many file on google)?
4) while you unplug the battery connector, is EDL mode still connected?
5) while you plug back the batterry connector, is EDL mode still connected?
Sorry for asking these questions, but I tried so many guide like this. And my phone still hard bricked
Click to expand...
Click to collapse
https://drive.google.com/uc?id=18Y6tkBjyYkn1x-LDTCdQde635lQASMKL&export=download
try this works perfectly for me
unzip password - password - 22072019
efazul_fayad said:
https://drive.google.com/uc?id=18Y6tkBjyYkn1x-LDTCdQde635lQASMKL&export=download
try this works perfectly for me
unzip password - password - 22072019
Click to expand...
Click to collapse
hi efazul,
where did you get this tool? is it really safe?
I have been downloaded these files and extract it, and immediately there are 2 files got deleted due to a virus by my eset smart security.
and here are the reports:
https://www.hybrid-analysis.com/sam...7ec8ca5e3c5a10a2d6da0c56bc907e5e02c1b010f1550
https://www.hybrid-analysis.com/sam...06fbbc029699060d4213800e7c34c73fd867822e67121
hardbrick solution
karkand said:
hi efazul,
where did you get this tool? is it really safe?
I have been downloaded these files and extract it, and immediately there are 2 files got deleted due to a virus by my eset smart security.
and here are the reports:
i found some viruses too but i allowed them and unbrick tool worked
i found this tool in a youtube video description as i dont have a authorized mi id it really helped me thats why i posted it here sorry for hastle
Click to expand...
Click to collapse
For anyone that is still looking for a solution to their bricked Note 7, the tool efazul_fayad linked works like a charm! You do have to disable your AV, I used Malwarebytes and turned off all protections except web and ransomware and it did the job!
2111002640 said:
where is prog file bro ???
Click to expand...
Click to collapse
i cant find it too
Good job man! And very good information! Thx.
efazul_fayad said:
https://drive.google.com/uc?id=18Y6tkBjyYkn1x-LDTCdQde635lQASMKL&export=download
try this works perfectly for me
unzip password - password - 22072019
Click to expand...
Click to collapse
Kaikhung said:
*Mine doesn't have to testpoint ( my computer auto recognize it as HS-USB QDLoader 9008), if you don't then search google for testpoint)
First make it to identify as edl mode on your computer (HS-USB QDLoader 9008)
next open the image file of the rom(extract from tgz file )
replace it with this file :" prog_emmc_firehose_Sdm660_ddr.elf " ( search google for this file)
important: only" prog_emmc_firehose_Sdm660_ddr.elf " not prog_emmc_firehose_Sdm660_lite.elf
then flash it by miflash.
if you have error then read this:
( first my computer did identify but mi flash didn't, it just show error: " cannot receive hello packet " so i try to open the back of the phone, unplug the battery connector, next plug it back and now it work. Then just flash it )
Click to expand...
Click to collapse
I did but still Getting cannot receive hello packet
Any help ???
---------- Post added at 07:52 PM ---------- Previous post was at 07:49 PM ----------
efazul_fayad said:
https://drive.google.com/uc?id=18Y6tkBjyYkn1x-LDTCdQde635lQASMKL&export=download
try this works perfectly for me
unzip password - password - 22072019
Click to expand...
Click to collapse
I can't extract the file, it says file corrupted
arafman said:
I did but still Getting cannot receive hello packet
Any help ???
---------- Post added at 07:52 PM ---------- Previous post was at 07:49 PM ----------
I can't extract the file, it says file corrupted
Click to expand...
Click to collapse
use 7zip
Error
Please check the attachment image. I'm getting this error.
brick
hello guys it took me a long time to find this totirial with all the files ready to revert the damaged phone i installed all the applications that are in the video description and it works 100% the phone came with the global rom but the original phone is chinese so i had to install the rom of Chinese origin. I put the folders on drive C of the pc. I hope that you will be able to reverse the situation in this way.https://youtu.be/scP-PF5NLl0
This Guide is only for Realme 6/6i(India)/6s [RMX2001/RMX2002/RMX2003] ONLY !!.This method is for only for Linux as mentioned , refer to this guide by daeSundae for Windows one : Windows GuideRequirements:-- BROM Bypass ToolKit :- Download Here
FIRMWARES: B.65 - Google DriveA.58[EU] - Google Drive
NOTE: Please read an explanation of what is userdata partition and how different is this from other firmware HERE.
USERS RUNNING WINDOWS CAN ALSO USE THIS METHOD BY USING ANY POPULAR DISTRO LIVE BOOTABLE MEDIA.
STEP 0 : If you are using Windows, make any popular Linux Distro Bootable by using Ventoy / Rufus and If already using Linux then skip this step. (Recommended : Manjaro , Fedora, Ubuntu).
STEP 1 : Connect to Internet and open terminal in the downloaded BROM_Bypass folder .
STEP 2 : Now run the following command.
Code:
chmod +x bypass && ./bypass
Select Your Distro when prompted like below -
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It will download and install necessary files and packages required automatically now.
NOTE: IF YOU HAVE ANY OTHER DISTRO THAN THE ABOVE MENTIONED POST A COMMENT.
STEP 3 : After few seconds connect your phone in BROM mode (Power off , press and hold both volume buttons and connect) when it prompts,.
Should look like below-
STEP 4 : After few seconds Smart Phone Flash Tool will launch automatically, Load Download Agent from "Required Download Agent" folder and scatter file from the firmware you downloaded.
Should look like below -
WARNING : DO NOT CHANGE MODE TO ANY OTHER THAN "DOWNLOAD ONLY" YOU PHONE WILL LOOSE IMEI AND SN.
STEP 5 : Click on Download button and just unplug and plug your phone (without pressing any buttons), flashing should start now.
Should look like below-
Wait until you see "DOWNLOAD OK" popup, then you can unplug and press power button to start your device.
YOU HAVE SUCCESSFULLY DOWNGRADED/UNBRICKED YOUR DEVICE.
SPECIAL THANKS TO - daeSundae for Windows method .chaosmaster / k4y0z , xyzz / xyz` , Dinolek , MEGAFON929 & Bjoern Kerler .
Used TOOLS for making this guide -
MTK CLIENT
MTK BYPASS
OFP DECRYPTOR
NOT NEEDED ANYMORE !!
For Users who are already using Linux can easily install patched kernel and use this method whenever they want instead of booting into FIRE ISO every time.
Download pre-built patched kernels - Download Here
Pre-built kernels are only available for Arch & Arch based distros, Debian & Debian based Distros and Ubuntu & Ubuntu based distros.
If you are using other than the mentioned above then download kernel patch from HERE and manually patch and compile kernel . For info about about patching & compiling kernel from source refer to your distro's documentation.
NOTE : ALL COMMANDS SHOULD BE RUN AS ROOT USER TO AVOID FAILURE OF MTK BYPASS AND SPFT.
For ARCH and ARCH Based Distros :
Open the downloaded prebuilt kernel and head over to "Arch" folder and run this command-
Code:
pacman -U linux-lts-kamakiri-headers-5.10.17-1-x86_64.pkg.tar.zst linux-lts-kamakiri-docs-5.10.17-1-x86_64.pkg.tar.zst linux-lts-kamakiri-5.10.17-1-x86_64.pkg.tar.zst
For Debian and Debian based Distros & Ubuntu and Ubuntu based Distros:
Open Debian /Ubuntu folder and run this command-
Code:
apt install -f ./linux-libc-dev_1_amd64.deb ./linux-headers-5.10.0-kamakiri_1_amd64.deb ./linux-image-5.10.0-kamakiri_1_amd64.deb
#You might need to change the file name acc to the actual file . file name might differ a little.
After you have successfully installed kernel use grub-customizer or simply reboot and boot into the installed kamakiri kernel, kernel name will end with "kamakiri"
Just to make sure you are into the newly installed kernel open terminal and run this command-
Code:
uname -r
The above command will show the currently booted kernel name which should end with "kamakiri". then you are good to go .
Now you can continue from Step 3 from the guide.
Extras for Debian and Ubuntu & its based Distros:Debian and Ubuntu hold packages a lot so you might not be able to install "libpng12" package and might get errors in python , to fix this i have added "libpng12" official .deb package and commands needed to fix python errors.
libpng12
Code:
apt install python3-distutils python-is-python3
Click on Download button and just unplug and plug your phone fast (without pressing any buttons), flashing should start now.
i tried quick as possible but but not starting download ,my device tries to recovery
not working
albatron34000 said:
not working
Click to expand...
Click to collapse
just saying not working wont help
Which distro ?
and run the script with tee command send me the log.
bx2nero said:
just saying not working wont help
Which distro ?
and run the script with tee command send me the log.
Click to expand...
Click to collapse
Click on Download button and just unplug and plug your phone fast (without pressing any buttons), flashing should start now.
flash not starting (unplug phone make phone powered on)
albatron34000 said:
Click on Download button and just unplug and plug your phone fast (without pressing any buttons), flashing should start now.
flash not starting (unplug phone make phone powered on)
Click to expand...
Click to collapse
Run the script with tee command and send log.
like this
./arch.sh | tee arch.log
bx2nero said:
Run the script with tee command and send log.
like this
./arch.sh | tee arch.log
Click to expand...
Click to collapse
thanks for help
albatron34000 said:
thanks for help
Click to expand...
Click to collapse
Ping me in TG
link in profile.
bx2nero said:
This Guide is only for Realme 6/6i(India)/6s [RMX2001/RMX2002/RMX2003] ONLY !!.This method is for only for Linux as mentioned , refer to this guide by daeSundae for Windows one : Windows GuideRequirements:-- Tools Kit :- Download Here
FIRMWARES:FULL FIRMWARE (Recommended).B.53 - Mega - Google Drive
B.37 - Mega - Google Drive - Google Drive 2
B.23 (First RUI Update for the device) - Mega - Google Drive - Mirror
A.50[EU] - Google Drive
NO USERDATA FIRMWARE - FOR PEOPLE WITH LIMITED DATA PLAN.B.53 - Download - Mirror
B.37 - Download - Mirror
B.23 - Download - Mirror
NOTE: Please read an explanation of what is userdata partition and how different is this from other firmware HERE.
USERS RUNNING WINDOWS CAN ALSO USE THIS METHOD BY USING ANY POPULAR DISTRO LIVE BOOTABLE MEDIA.
STEP 1 : If you are using Windows, make any popular Linux Distro Bootable by using Ventoy / Rufus and If already using Linux then skip this step.
STEP 2 : Connect to Internet and open terminal in the downloaded Linux Tools folder .
STEP 3 : Now run the following command according to your Distro.
FOR ARCH BASED DISTROS:
Code:
chmod +x arch.sh && ./arch.sh
FOR UBUNTU BASED DISTROS:
NOTE: If you are using Ubuntu make sure you have "universe" repository enabled from "Software & Updates" application.
Code:
chmod +x ubuntu.sh && ./ubuntu.sh
FOR FEDORA BASED DISTROS:
Code:
chmod +x fedora.sh && ./fedora.sh
NOTE: IF YOU HAVE ANY OTHER DISTRO THAN THE ABOVE MENTIONED POST A COMMENT.
STEP 4 : After few seconds connect your phone in BROM mode (Power off , press and hold both volume buttons and connect) when it prompts,.
Should look like below-
View attachment 5378191
STEP 5 : After few seconds Smart Phone Flash Tool will launch automatically, Load Download Agent from "Required Download Agent" folder and scatter file from the firmware you downloaded.
Should look like below -
View attachment 5378193
WARNING : DO NOT CHANGE MODE TO ANY OTHER THAN "DOWNLOAD ONLY" YOU PHONE WILL LOOSE IMEI AND SN.
STEP 6 : Click on Download button and just unplug and plug your phone fast (without pressing any buttons), flashing should start now.
Should look like below-
View attachment 5378655
Wait until you see "DOWNLOAD OK" popup, then you can unplug and press power button to start your device.
View attachment 5257589
YOU HAVE SUCCESSFULLY DOWNGRADED/UNBRICKED YOU DEVICE.
SPECIAL THANKS TO - daeSundae for Windows method .chaosmaster / k4y0z , xyzz / xyz` , Dinolek , MEGAFON929 & Bjoern Kerler .
Used TOOLS for making this guide -
MTK CLIENT
MTK BYPASS
OFP DECRYPTOR
Click to expand...
Click to collapse
great tool for linux users to unbrick devices with easy way.
Great tool and easy way to unbrick Realme 6/7 from linux without any problem.
confirm working 100% on Realme 7.
Thanks bx2nero.
Thank you for the tools and guide!
Confirmed working on MT6765 device (RMX2189 RealmeC12) using Linux Mint and the firmware provided in an XDA link on the Realme C12 Guides, News and Discussion page.
As a note to myself and others reading this, In Linux Mint, to enable the "universe" repository, I found instructions to enable it in command line from here: https://askubuntu.com/questions/78613/how-do-i-enable-the-universe-repository-from-the-command-line
do you have the RUI2 firmware? or where I can find it?
I get this message
ensarman said:
View attachment 5489967I get this message
Click to expand...
Click to collapse
Read Step 5 again.
bx2nero said:
Read Step 5 again.
Click to expand...
Click to collapse
you are right, I have to select the right download agent, thanks, when I have finished, can I lock the phone again?
ensarman said:
you are right, I have to select the right download agent, thanks, when I have finished, can I lock the phone again?
Click to expand...
Click to collapse
Yes Ofc.
It is not detecting my device. I have been trying to do this but SP Flash tool doesn't launch. After I connect my device, the loading stops, no more activity in the terminal, but it still doesn't launch SPFlashTool. However if I disconnect my device, it does throw the error :
Preloader
Preloader - [LIB]: Status: Handshake failed, retrying...
After this I cancelled the command and ran ./bypass again. But this time It gave the error :
./bypass: line 62: ./mtk: No such file or directory
and directly started SPFlashTool, without even waiting for me to connect the device like that in the prompt shown in step 4.
Sam 211 said:
It is not detecting my device. I have been trying to do this but SP Flash tool doesn't launch. After I connect my device, the loading stops, no more activity in the terminal, but it still doesn't launch SPFlashTool. However if I disconnect my device, it does throw the error :
Preloader
Preloader - [LIB]: Status: Handshake failed, retrying...
After this I cancelled the command and ran ./bypass again. But this time It gave the error :
./bypass: line 62: ./mtk: No such file or directory
and directly started SPFlashTool, without even waiting for me to connect the device like that in the prompt shown in step 4.
Click to expand...
Click to collapse
if u are still facing issues .
run
Bash:
./bypass | tee log
and send me the log file.
is it possible to update the latest version after downgrading.
because my realme 6 rmx2001 after downgrade to b.53 and then update to b.65 untill now no latest update of firmware version ui2.0 c.17