Related
What is the ideal case for your Nook Color?
Is it one that is available or not?
What are some of the features you would like it to have?
Do you want a fold case that covers the screen?
Is the micro usb port in a convenient location?
Looking for some ideas. Working on a shell now for a mold. Not sure if anything will come of it but want to see what you all are looking for in a case. Feel free to post your thoughts. Thanks.
I would like to see a one sided hard cover that can protect the screen when not in use and snap onto the rear when in use. Probably use the typical four corner frame system you see in many cases so nothing is obstructed.
Also, have a stand "system" so that when it is snapped to the rear you can prop up the NC. Maybe something like what you see on back side of keyboards. And like some keyboards I've seen, have different levels of lift. One lift level that slightly raises the NC off the surface, for typing and such. Another lift level that is like the leg stand you see on the EVO 4G or Archos 70, for video/picture viewing and the like.
Heh. First post around here. Been meaning to chime in on a thread and this is the perfect one to start. Only because I've been looking for something I described but there is nothing out there yet.
I'm looking for an inexpensive silicone gel skin, something I'd keep on pretty much all the time. I'm also keeping my eyes open for sturdy travel case.
There seem to be choices out there for both, I'm just waiting a bit for more of them to hit ebay.
I missed your last question about the micro usb port. IMO its not in a good location because its awkward when trying to read while charging, particularly when reclining or lying down. I'm concerned about putting pressure on the usb cable, especially considering its not just a standard cheap cable. Not sure how a case will help this, though.
drp1 said:
I missed your last question about the micro usb port. IMO its not in a good location because its awkward when trying to read while charging, particularly when reclining or lying down. I'm concerned about putting pressure on the usb cable, especially considering its not just a standard cheap cable. Not sure how a case will help this, though.
Click to expand...
Click to collapse
ill be trying out a few designs once the mold sets. i can add a ribbon cable in the case to move the USB port to the sides which I might try. trying to keep it thin but actually worth putting on.
techboydino said:
ill be trying out a few designs once the mold sets. i can add a ribbon cable in the case to move the USB port to the sides which I might try. trying to keep it thin but actually worth putting on.
Click to expand...
Click to collapse
Are you designing desktop/multimedia cases as well? I would love additional speakers on the NC and also a magnetic swivel X mount stand for desktop use.
My ideal case is not available yet. It is an envelope-like case that will allow me to pull the Nook out and use it naked. Something in nice black leather.
Something similiar to the covers of the TI calculators, with a little more thought about aesthetics obviously.
A 90deg connector or adapter would be nice. Then run the cable through the corner loop thingie.
Cheers,
kev
bugeyed1 said:
A 90deg connector or adapter would be nice. Then run the cable through the corner loop thingie.
Cheers,
kev
Click to expand...
Click to collapse
Good Idea, I may try that out.
Im not any sort of professional or anything, but I do have access to some pretty sweet resin's and molding equipment. Carbon fiber is the idea, but the glass mold and how I want to do the front part comes first. Ill keep the thread updated.
ideal nook case
looking for something very close to this case
http://www.amazon.com/gp/product/B0040VNRTG/ref=oss_product
just substituting the swivel belt clip for a kickstand
i like the idea of moving the usb jack to another spot but i think that would add alot of cost and effort to the case build
Rube Goldberg lives; or, is this even possible?
You asked for the ideal, here is mine. Not at all sure it is doable....
1. In the interest of keeping the total package as slim as possible, no back, unless it is necessary to support other features.
2. [Front] cover has a slot for a pad of paper and/or corner slots for index cards.
3. [Front] cover is hinged on the right (I'm right handed and I want to be able to write easily).
4. [Front] cover has a foldover flap to keep the paper or cards from contacting the screen when the cover is closed.
5. The cover can fold 180 degrees so that the cover lies flat against the back of the tablet.
6. The cover can support the Nook as an easel in landscape mode.
7. The cover can support the Nook as an easel in portrait mode - this might involve some sort of short extension legs or other support to raise the lower edge of the Nook an inch or so (and this might help with the need to plug in the USB connector at the bottom).
8. Bonus points for the ability to fold out a handle attached at the lower left corner when in portrait mode, sort of like a hand mirror.
9. And of course it should be strong, light, durable, elegant, and less than $40 US.
I'm ready to order as soon as I see the pictures of the finished product.
Thanks for the ideas everyone. Haven't worked on it in a few due to being out at CES. Unfortunately there were NO cases out there. Working with Speck to find something but tried everything else and could not even find a nice slip cover. Otterbox said they are testing designs so no real info there either.
My ideal case is something like
http://shop.brando.com/samsung-galaxy-tab-case-with-bluetooth-keyboard_p05269c0299d057.html
this.
Bluetooth keyboard case, waiting for bluetooth to work for NOOK!! and I could use it as a netbook and a tablet. IDEAL.
This is my cheap (free) case for my nook color. It’s the zippered case for my trucks instruction manual. The patch covers the ford symbol; if I need to hide it in plain sight I can pull the patch off and leave it in the back seat. It fits perfectly and there is a plastic divider on the inside I can put business cards and a small pad of paper (as others have asked). All I keep in it is a set of skullcandy headphones in an microfiber Oakley sunglass bag for cleaning the screen.
michael
-"I learned a very valuable lesson on my travels, Tucker. No matter how bad things might seem..."
-"They could be worse?"
-"Nope, no matter how bad they seem, they can't be any better, and they can't be any worse, because that's the way things fraking are, and you better get used to it Nancy. Quit yer *****ing."
Perfect case for the Nook Color
Before I bought my Nook, I had a Pandigital Novel that I bought on eBay.
In the same eBay search results page the Novel appeared on was a great case called BookArmor. Although it was $35, I bought it. And I haven't regretted it either.
The BookArmor case comes with a set of velcro-like pads that stick on the back of the tablet and allow it to be fixed to the case. The case itself is laminated steel and plastic covered with textured fabric. It zippers shut and the zipper sides are soft and stay out of the way when the case is opened. You have total access to all side buttons and ports. The inside surface that comes in contact with the screen is covered with a soft foam pad.
When I decided to get the Nook, I found out that the case I had for the Novel is the exact same case for the Nook Color. I really like this case and haven't even considered another one.
For more info go to extremeinkjet.com and click on BookArmor cases in the blue left-hand column. Pick any Delta 6 case ... there is a Nook Color one. Checkout their video at the bottom of the page.
It looks like this case is really popular too ... there aren't any left on eBay and the extremeinkjet site shows all out of stock for the Delta 6 case. Amazon shows one Delta 6 left for the Pandigital (same case) but it doesn't even show up for Nook Color.
I don't know if I'd call it perfect. But, I bought the B&N case with the vertical flap and ribbon with magnet on the end to hold it closed/open. It works well for me.
If they were available in store when I bought my nook, I would have also considered the silicone one. Although, if I went that route, I'd probably prefer the otter box version with the hard resin exterior an rubber liner. I would also have considered the black leather pouch one where you completely remove the nook to use it.
Alas, none of these were available to me when I made my purchase so I'm using what I have.
With either the otter box or the silicone I would gain a thinner form factor. But, I would never be able to completely cover the screen. With the pouch one, I would gain the thin form factor when using and would not add much when transporting. But, it's basically just a branded leather sleeve.
In the end, what drew me to the case that I bought was the vertical flap and ribboned magnet. 1 - with the horizontal flapped ones, the magnet does not flip around to hold the flap to the back of the case so it's open like a book with the flap dangling out the right side. 2 - with the vertical one that I got, you flip the cover over the top, move the magnet to the back to hold the cover in place and you have all your nooky goodness to go to town with!
Just my 2 cents.
jlh8733 said:
Something similiar to the covers of the TI calculators, with a little more thought about aesthetics obviously.
Click to expand...
Click to collapse
Wow...love love love this idea.
This would be great..a hard protective slide case.
This would definitely be a $$$ maker.
I bought a "Industriell Cover in Storm" cover and it works perfectly, very simple, protects the screen, and it's small.
I'm stealing your "DON'T PANIC" sticker on the back idea. thanks for reminding me.
Hi all,
I have recently switched to the Streak from owning all models of the iphone, and have not looked back. Such an awesome device, and android is great. Anyways, I had owned a case for my 3gs and Iphone 4 called the Mogotalk xd. It is a bluetooth/case/charger that keeps an extremely thin and very good bluetooth on the back of your phone. I have missed it very much, especially since the streak is huge and could really benefit from one of these...The product is very smart, and very thin...but this isn't a review, so you can check it out their site, which I can't link yet...just google or youtube it...
I contact ID8 support to ask if they would be making these cases for other devices, and they replied back that they would not. So, I decided to mod mine for my streak, and post it here in case anyone else wants to do the same. It came out very well I think, and was very easy...extremely useful...
I started by removing the felt lining (just peeled out), then, after messing around a bit, decided to just take an exacto knife to the rubber for the sides of the iphone. I cut right along the back of the case, so as to have a close fit. Pics attached ( I also cannot link pictures yet :-C)
I have 2 battery covers, so I then attached it with double sided tape (temporary, as I am looking for some way incorporate a kickstand next). I lined up the top of the case with the top of the battery cover. It still slides on fine. If someone wanted to, they could probably dremel the top of the case to fit perfectly on the battery cover, as the camera hole unfortunately is horizontal...and there are no electronics on the top half (bottom has charging port) The only thing you really lose is a few millimeters of thickness...but this thing is thin (still fits tightly in the car dock from dell) And now I have bluetooth that charges on my phone and is always with me. Really easy to do, and definitely worth it if you like talking on your phone, as this can be difficult with the streak. Let me know if you have any questions...you can pick this up on amazon or other sites for around 40-45 dollars..its worth it..
One thing to be careful of there is the battery compartment door. There's a power switch inside the Streak that's activated by a pin on the door and if the door moves your Streak will power down. This is a known problem with nothing on the door so I don't know how yours will behave with the extra weight/bulk hanging off it. I know good comfortable earpieces are hard to find so maybe you could incorporate the BT holder into another case instead of attaching it directly to the streak?
I thought about that, and it would be very easy for someone who wanted a case...however, I do not...The Case/bluetooth is extremely light, and for some reason, the battery cover now fits much more tightly in place..its not going anywhere...It would be really easy to just cut out out the back of a case, especially a silicone one, to fit...or to cut the top half as I said before and fit it into a hard case...
I was lucky enough to be selected to receive an review one of the new Artech 21 cases for our LG G4's. I have always wanted to try a case like this because I like the concept of having my phone and wallet stuff combined, can't forget either that way (or both if I'm really scatter brained). Sadly, I never pulled the trigger due to my wife having had a couple and the quality just not being there a various points, enough to cause a total lack of will to try one for myself.
Enter Artech 21.
I received my case very quickly and packaged VERY well. No pics there, sorry. Let's just say that their attention to detail extends beyond simple production. I got it yesterday and immediately put it to use, and let me just sum it up like this. Simply stunning craftsmanship, and perfect in every way.
All pictures were taken on a Nikon D5000 using a 35mm f/1.8 lens for ambient light with some later flash shots and the really close ones towards the end were switched to a 18-55mm kit lens.
Let's just start with a couple of ambient light overview pics.
On the front side, we have a clean leather face with a reinforced spine stitch line down the left side, and a very classy and subtle company logo on the bottom right.
On the rear we have the same spine reinforcement stitching going down the right side, and very well sized and placed cutouts for the speaker and camera. Very very well done.
Throwing that one in simply because I like how the focal point and bokeh came out.
Opened up you can see I've already put it to use. It's housing my work ID card and drivers license in the clear thumb hole pocket (VERY good idea to put the thumb hole there, makes accessing those a snap). Also houses the two debit cards I carry along with my costco membership card.
The pocket underneath the cards won't hold a fully unfolded bill, but I wouldn't expect it to either. I don't carry a lot of cash so folding bills up to put in the pocket isn't a concern. If you do carry more than a few bills this may not work for you because they would bulk up the front side quickly. Money clips ftw.
The inside of the case is finished in a very fine suede to go wonderfully with the super nice leather exterior parts.
This pic above is a look at it closed. The clasp while small, is perfectly strong and small enough to be unintrusive. The back side never sits perfectly flat due to it's designed fold for stand usage, which isn't a big deal. Even with all my cards in the front side it still sits very flatly closed. Very well made in terms of size.
Flipped view on the bottom side. You can see how the back never lays truly flat, but this is by design.
Now, I want to move on to some good stuff. I've done sewing professionally on industrial machines, so I have a good idea what I'm looking at in terms of quality. And this case is just dripping with quality. The craftsmanship is absolutely fantastic. Extremely even stitching lines, wonderful stitch spacing, straight cuts, even the back stitching on the starts and ends is perfect. Here are some close up shots below:
Last part, the holder for the phone. This was a huge fail point on the couple of cases my wife had for her G2. There are ZERO worries here. Below are installed pics of either end:
The closest comparison I can make is that Artech 21 took an Incipio Feather case and used it in their folio case. The phone is VERY tightly held in place, but utilizes the least amount of shrouding possible at the same time. I have zero worries of the phone ever popping out of this holder and case.
I honestly have found no flaws with this case. It's new to me so using the phone is a little awkward at first, but I'm adjusting fast. Using my shoulder to hold the phone to my ear is actually much easier now due to the added case thickness. It holds what I NEED to carry with me with extra room to shove a days worth of receipts and a little cash, but without leaving enough room that I start packing my wallet full of stuff.
As far as recommendations for future changes or improvements, the only thing I could think of is the potential to make the magnetic clasp two sided so you could flip the front of the case all the way around and reuse the clasp to hold it open. And maybe give the option for people to have a ID card pocket installed on the front and not have the clear one in the inside (I'd choose that because I use my ID card to get into the plant I work at every day I work). But those are two very very minor things that aren't necessities, just feedback for possible future options.
One last parting shot for posterity sake:
I'd like to say thanks to Artech 21 for giving me the opportunity to try your wonderful case and just say that if you're looking for a wallet or folio case, by all means give them a try. They're worth every penny and you won't be disappointed.
Piggyback Review
I'm going to take the opportunity to piggyback on the review by Fastbird here and not clog up the accessories thread with 50 of these reviews on the same case.
To begin with, mine is the dark version of the case, and so aside from it's obvious dark color difference, it also has a full plastic case around the phone vs. a side-to-side hug case and the wrist strap. But enough talk, let's get into the case itself.
Opening the package reveals a few things, the case which looks, feels, and smells great; a wrist-strap (I chose not to use this), a business card, and a 10% coupon code for another product with a request for an Amazon review (to come later). Having used my phones naked for the past 4 years, a case, especially the folio wallet type, was quite a change, but after 3 days of use I'm completely adjusted to it. The case definitely adds some bulk to the phone as you’d expect, but my phone spends most of its time on a desk or somewhere else, not in my pocket. I’d say ladies with small pockets are not going to find this comfortable to have in there, and even for guys with tighter pants/jeans, it’d be the same deal.
The case is very well made, definitely had the touch of an Artisan in the stitching. You will notice the backing on the leather is most likely a nylon which is glued to the natural leather back and sewn around the edges. The front and back are both double layers of leather and the spine seems to be only a single layer. Holding it in your hand is easy enough when you fold the front around. As I mentioned earlier, the plastic phone case is a full edge case vs the light brown only hugging the sides. I use the Skinomi Tempered Glass protector on the screen and it doesn’t push any of the edges up. The phone definitely isn’t coming out of the case either.
Taking pictures in portrait mode is somewhat difficult because the back tends to want to fold around easily if you don't hold it right. If a way to lock this in until you want it to be a kickstand was developed, it’d be a major improvement. The cutouts on the back don’t get in the way of your shot and landscape is easy to manage. My cutouts aren’t quite centered, but it is such a small offset, you can't notice unless you are looking for it.
Closing the case comes easy because of the magnets in the clasp. However, if you want to really use it as a wallet, you’ll find it initially difficult to put more than three cards in the slots. I couldn’t get it closed with all four slots full. I don’t plan to really use it other than for cash because I have too many cards to fit in here anyway, but if you only have a few you use often, it could be really useful.
As a kickstand, I found no complaints. It doesn’t fall down, close or otherwise cause any problems if you are just watching a show. The cutout for the speaker does muffle it if it is closed and face up, but that’s what you get with a rear speaker phone.
Overall, if you want to make a statement with your phone, don’t already have a leather back, and plan to hold some cash, IDs, etc… then I say grab one of these cases. The best part about any case is that you can always take it off when you don’t want it and put it on when you do!
TL;DR
Pros:
- Hearty construction, high quality material, artisans touch
- Firm grip on the phone
- Card slots if you're into that
- Kickstand when you want it
- Wrist strap (dark version only)
- Keeps your phone safer than it is naked
- Color choices
- Compatible with glass screen protectors
- On sale on amazon right now! http://www.amazon.com/Artech-21-Premium-Italian-Handmade/dp/B00XKHWIG4/ref=sr_1_2?ie=UTF8&qid=1435201794&sr=8-2&keywords=artech+21+lg+g4
Cons:
- Floppy back when using portrait mode camera
- Needs some stretching to fit a card in every slot and close
- Probably too bulky for tight pants, jeans, short shorts, ladies pants, small pockets in general (although I think it'd be a problem without a case in some pockets too)
- Everyone is jealous!?!
Props to Artech 21 for making a superb product, allowing me to review it for free, and bringing some extra class to my already awesome LG G4.
So it's been nearly 2 weeks since I started using this case, figured I'd post up an update. I'll just say that I'm NOT going back to anything else. I just spent the past week on vacation in Gatlinburg/Pigeon Forge TN and having this case was remarkably not cumbersome at all and extremely convenient. Case is holding up fine, no signs of wear, no split seams, no pulled stitches. Holding up extremely well for the amount of use I gave it over the past week.
Sean , you better hide your id
and remarkable photography skill
I just want to say it looks poor quality!!!!!
james491225 said:
I just want to say it looks poor quality!!!!!
Click to expand...
Click to collapse
Not sure if serious or just plain stupid.
officerdoofy said:
Not sure if serious or just plain stupid.
Click to expand...
Click to collapse
plain stupid i guess
carolineOHIO said:
plain stupid i guess
Click to expand...
Click to collapse
I vote for stupid... or troll.
Like above, I too dont want to clutter up the accessories page with reviews of the same case so ill throw some additional pictures out there and give a few pros and cons for me.
PS: Im using a leather back on my phone, just a FYI
Pro:
- Leather quality looks and feels great
- Stitching was done with what looks like a good quality thread
- Glue that holds case to leather cannot be seen and holds the two parts together great
- Leather back phone fits very snug in the plastic holder, might be a con if it pops out, but for now its a pro
- Wireless charging works with a generation 1 Samsung charging pad
Cons:
- I can fit 3 cards in my case and it closes fine, when I put my 4th card the case sometimes opens up, and with the 5th card it never stays shut. I wanted to use the case and leave my wallet at home, but I unfortunately will not be able to, at least right now. I will give the case a few weeks with 4 cards in it and trying to stretch it out. If I can fit 6 cards in the case I can ditch the wallet completely and just put everything in this case.
One last note, its not really a con for me because I have big hands and long fingers but the thick leather might be hard for some users to hit the volume down button.
If you would like any additional photos or have any additional questions feel free to ask
UPDATE 1Well I just got to my office today and I was really excited to see if it would charge on the wareless charger....and even with the thick leather back it DOES! Now I'm sure it all depends on the charger you have, but I am using a 1st generation Samsung charging pad and it works perfectly with the phone. Im sure any newer name brand unit will also work, the china models, YMMV. Pictures below
UPDATE 2After having the case on the phone for less than a week the plastic holder for the phone has started to crack with the leather back on my phone. The cracks look minimal at the moment but I will keep an eye on them to see if they spread. Updated with pictures below.
UPDATE 3Well a week and a day in one of the corners is starting to crumble. The phone looks to be falling out of the case as well. Its a shame, since I absolutely love this case. Just in case anyone is wondering, I keep the phone in my back pocket at all times when walking aroud. I have never dropped it, sat on it or anything. This is just the wear and tare of having the leather back and pulling the phone in and out of my back pocket.
Below pictures are with no cards in the wallet
Below 2 pictures are with 5 cards in the wallet, ID and 4 debit cards
Below pictures are with 3 cards in the wallet, ID and 2 debit cards
Below pictures show the phone charging on a Samsung 1st generation chargin pad
Below pictures show the cracking in the plastic
Below picture show the crumbling of the plastic and the phone starting to fall out of the case
Posted updates #1 and #2 above. Will continue to update this review as I use it.
dtmcnamara said:
Posted updates #1 and #2 above. Will continue to update this review as I use it.
Click to expand...
Click to collapse
sorry for that inconvenience
I'd like to apply to review this case, but would like to know if the plastic cracking is an isolated issue or if it's being addressed in a newer version to be released for review. Thanks!
Thank you for sharing and the photograph great
dtmcnamara said:
Posted updates #1 and #2 above. Will continue to update this review as I use it.
Click to expand...
Click to collapse
Any idea how / why the cracks appeared? Like how do you use the case, do you put your phone/case in your pocket where it would get stressed? I ask because I store my phone in my pocket and wonder.
Posted update number 3 above. Looks like it might be time to retire this case already.
dtmcnamara said:
UPDATE 2After having the case on the phone for less than a week the plastic holder for the phone has started to crack with the leather back on my phone. The cracks look minimal at the moment but I will keep an eye on them to see if they spread. Updated with pictures below.
UPDATE 3Well a week and a day in one of the corners is starting to crumble. The phone looks to be falling out of the case as well. Its a shame, since I absolutely love this case. Just in case anyone is wondering, I keep the phone in my back pocket at all times when walking aroud. I have never dropped it, sat on it or anything. This is just the wear and tare of having the leather back and pulling the phone in and out of my back pocket.
Click to expand...
Click to collapse
So pocket stress in other words. Walking and bending in part crushing / extreme pressure to the case and phone.
This is why I usually keep mine in softer plyable tpu in my front pocket. I know just walking around and going up and down stairs I apply a lot of pressure on my phone and cases. I had other previous model phone in white cases that would form stress cracks. The black versions would be slightly more flexible and not crack. Used to be many people complaining about it being a manufacturers defect.
In larger pockets my phones would sometimes rotate horizontally. If i didnt catch and rerotate reposition the phone I wouldnt be surprised to find my screen cracked from the bending pressure.
Perhaps artech should redesign the inner holder would be my suggestion. Use a more plyable nylon material, instead of ridgid plastic?
Is it a hard clip on? How hard would it be to replace the inner holder? Would be easy for a user to do it?
My review
Just got my case in today JULY/25/15. So I will edit and update as time goes by using the case.
Initial thoughts;
First I must say it is a very nice solid yet soft and supple case. The color is like a natural imperfect tanned turmeric and honey. I really like the magnetic clasp. It auto locks, you can pull flap open and clasp detaches or you can manually flip it.
Was disappoint to see it does not have the ability to turn the phone on and off when opening and closing the case.
Update JULY/26/15;
The clip on portion is ultra thin and hard-rigid plastic. The case exposes the top and bottom, allowing for direct access to 3.5mm headphone jack, micro usb port, mics and remote IR.
Functionality that is missing for me is the ability to use the phone while the case is closed, it has to be flipped open to answer and stay open for the duration of the call. It does not have a front speaker cutout.
UPDATE August/02/2015, 1 week + 1 day;
Flip back kickstand is a nice feature. It allows for the phone to be propped up while watching videos / youtube.
With normal use the case as held up nicely, showing no signs of wear.
I've been able to remove and reinstall the phone several times and have not experienced any signs of the inner holder cracking.
It is still annoying to have to open the wallet and keep the cover open to talk on the phone. It makes it awkward to handle. I've also not wanted to crease the bind by flipping the cover all the way back. This makes the phone thicker and harder to hold for smaller to medium sized hands.
So far I would recommend this case for those that like a wallet you can carry your phone in. Although what fits into it as a wallet is very limited. Perhaps better to call it a stylish leather case capable of protecting the phone and holding some important essentials.
..to be continued..
clockcycle said:
Any idea how / why the cracks appeared? Like how do you use the case, do you put your phone/case in your pocket where it would get stressed? I ask because I store my phone in my pocket and wonder.
Click to expand...
Click to collapse
the cracker due to frequently take the phone out with innappropriate way
should gently hold the case , press the camera hole to take the phone out
---------- Post added at 12:03 PM ---------- Previous post was at 12:01 PM ----------
clockcycle said:
Just got my case in today JULY/25/15. So I will edit and update as time goes by using the case.
Initial thoughts;
First I must say it is a very nice solid yet soft and supple case. The color is like a natural imperfect tanned turmeric and honey. I really like the magnetic clasp. It auto locks, you can pull flap open and clasp detaches or you can manually flip it.
Was disappoint to see it does not have the ability to turn the phone on and off when opening and closing the case.
Update JULY/26/15;
The clip on potion is ultra thin and hard rigid plastic. The case exposes the top and bottom, allowing for direct access to 3.5mm head phone jack, micro usb port, mics and IR.
Functionality that is missing for me is the ability to use the phone while the case is closed, it has to be flipped open to answer and stay open for the duration of the call. It does not have a front speaker cutout.
..to be continued..
Click to expand...
Click to collapse
it is no automatic for the wake up due to we have no certification from LG , and we think we just keep it traditional way to use the wallet case
Leather quality looks and feels great!! It is very useful for me to put cards.
hahahayiji said:
Leather quality looks and feels great!! It is very useful for me to put cards.
Click to expand...
Click to collapse
maybe you I.D too
Im looking for a holster, i found some but most have a magnetic closure. Im not sure if its ok for our phones so i just wantes your thoughts or experience with it. I use samsung pay every day and i dont want any sensor to be off because of the magnets.
Maybe im a little paranoid over it because it probably takes an extremely powerful magnet to cause any harm but im not willing to test it out lol
None of the magnetic items for the phones will cause any harm to your phone.
You may notice that the stylus doesn't work where the magnet is, but it will work just fine when you move the magnet.
As a Samsung Experience Consultant, I do not recommend anything magnetic, I think they mess with the device internals.
kmarx said:
As a Samsung Experience Consultant, I do not recommend anything magnetic, I think they mess with the device internals.
Click to expand...
Click to collapse
You do know many manufacturers use magnets in their devices and accessories, including Samsung and Apple, right? Every Apple smart case / cover utilizes magnets and (as much as I love Android) I can honestly think of no more reliable tablet than the iPad.
kmarx said:
As a Samsung Experience Consultant, I do not recommend anything magnetic, I think they mess with the device internals.
Click to expand...
Click to collapse
You think or you know?
You should only be putting out info if you know. If you don't know, and it is clear you don't, then you should not speak on a subject.
Magnets will in no way harm the phone unless you are using super powerful magnets, what you use to hold the phone to a dock and things like that won't bother it in the least bit.
I do not recommend any of the Samsung Flip Cases to customers because I have seen them cause problems with devices before. I do not recommend magnetic closures because I have seen them cause problems with devices.
flyingwolf said:
You think or you know?
You should only be putting out info if you know. If you don't know, and it is clear you don't, then you should not speak on a subject.
Magnets will in no way harm the phone unless you are using super powerful magnets, what you use to hold the phone to a dock and things like that won't bother it in the least bit.
Click to expand...
Click to collapse
kmarx said:
I do not recommend any of the Samsung Flip Cases to customers because I have seen them cause problems with devices before. I do not recommend magnetic closures because I have seen them cause problems with devices.
Click to expand...
Click to collapse
What sort of issues have you seen?
It seems strange that Samsung would release a product that would interfere with one of its flagship products and sell it as an accessory.
Mayonesa said:
Im looking for a holster, i found some but most have a magnetic closure. Im not sure if its ok for our phones so i just wantes your thoughts or experience with it. I use samsung pay every day and i dont want any sensor to be off because of the magnets.
Maybe im a little paranoid over it because it probably takes an extremely powerful magnet to cause any harm but im not willing to test it out lol
Click to expand...
Click to collapse
I'm not sure if this is specifically what you're asking about, but I've been using a Scosche MagicMount (http://amzn.com/B00I608BJ8) for my car dash and love it! I lay the larger metal plate (it comes with two sizes) at the bottom of my case, oriented where the longer sides are parallel to the bottom of the phone (let me know if you need a picture). I don't stick the plate to my phone, but rather set it inside my case. It turns out to be the perfect length and height for the Note 5. Wireless charging and Samsung Pay still work great. I used that picture of the Note 5 where someone made the back of transparent to make sure the wireless charging coil inside the phone does not over lap with the metal plate that comes with the mount.
I bought a nice leatherette case for my Note 5 only to find that the S-Pen does not work on the right hand side where the magnet is. I took it off immediately and went back to my Body Glove case.
flyingwolf said:
You think or you know?
You should only be putting out info if you know. If you don't know, and it is clear you don't, then you should not speak on a subject.
Magnets will in no way harm the phone unless you are using super powerful magnets, what you use to hold the phone to a dock and things like that won't bother it in the least bit.
Click to expand...
Click to collapse
I purchased a wallet case on eBay. I noticed there were areas on the screen that wouldn't work. When I flipped the removable phone case there were 6 magnets...three on each side to hold the phone in the wallet. These magnets are small, but the impact was terrible! I I'm attaching pictures of me using the s pen to find the areas on the screen and the back of the phone case.
charlesrogers74 said:
I purchased a wallet case on eBay. I noticed there were areas on the screen that wouldn't work. When I flipped the removable phone case there were 6 magnets...three on each side to hold the phone in the wallet. These magnets are small, but the impact was terrible! I I'm attaching pictures of me using the s pen to find the areas on the screen and the back of the phone case.
Click to expand...
Click to collapse
-Sigh-
Like I said. "Magnets will in no way harm the phone"
This isn't harming your phone, it does do as you have seen which is a TEMPORARY issue and has already been discussed, it will cause no permanent harm to the phone.
I don't know about magnetic holsters but magnetic car mounts most definitely YES. I've used many holsters over the years, for all kinds of types of phones. I haven't really thought about it till I saw this post. My buddy has a good magnetic car mount for his s7 edge, but I don't really know anyone at the moment that's using a magnetic holster. Just my opinion though, the last time I used a holster was way back in January and it was actually pretty good. It was a best buy branded platinum, with kickstand holdster and case like a 3 in kind of deal but not magnetic. It fit could on my belt clips for my jeans and suit pants. Good luck
bought the Bracketron brand at best buy, the magnetic part is on the mount, it is a metal plate stick to your phone so no interference from the magnet, not owning a note 5 tho.
I put in some small tin paper cutouts INSIDE my note 5. I took the back cover off, peeled the sticker with the color/logo and spraypainted it a nice black then just glued the tin paper inside of that. Then I took a flat wireless charger and added neodymium magnets to it, modded it to be as small/thin as possible then covered it up with some black thin leather I bought from Michaels. I mounted it up to my car's console and now I just plop the phone onto it and it sticks tight and fast charges, no wires or case. Worked perfectly, but in hot weather the leather would become a bit slippery so it would slip off, but I fixed that with a couple of very small circular double sided gel tape on the bottom just to provide a bit of friction. I've ridden like this for the past 5 or 6 months and it doesn't slip or fall off at all, heavy bumps, hot weather, nothing dislodges it.
The only thing that doesn't work is the spen, and that's only directly over the magnets, but I wouldn't write on it anyway while it was mounted. Otherwise I've had zero difficulties with it. I'll post up pics if anyone is interested, but it's a bit frankenstein looking.
I'm looking a non-keyboard screen cover that attaches magnetically (like the official keyboard) so that I wouldn't have to remove the back portion of the keyboard cover.
I've been searching around, but havent' been able to find anything... which is crazy that aliexpress doesn't have something like this yet even...
This is magnetic book cover without keyboard
https://www.samsung.com/us/mobile/m...-tab-s6-book-cover-cloud-blue-ef-bt860pleguj/
I would also get one of those should they exist. The Keyboard cover is nice, but it adds decent bulk and weight to the tablet, and sometimes you just know you won't need to type...
Anyone?
urmcgwy said:
I'm looking a non-keyboard screen cover that attaches magnetically (like the official keyboard) so that I wouldn't have to remove the back portion of the keyboard cover.
I've been searching around, but havent' been able to find anything... which is crazy that aliexpress doesn't have something like this yet even...
Click to expand...
Click to collapse
wao.. i was going to ask the same thing... I really like the keyboard, but sometimes would like to snap it off and snap in a cover only (no keyboard) without having to remove the case from the back of the tablet....
Like @techops said, you are looking for the Samsung BT860 Book Cover. It is not cheap but perfectly worth the price.
I'm using this. It's just as good as the Samsung magnetic case in my opinion
https://www.amazon.com/Samsung-Galaxy-Tab-10-5-2019/dp/B07Z4HKTM4
It is the next best alternative, imo. I had them both in hand / on device and decided for the Samsung one, despite double the price. I preferred the feel and quality. Also the magnets on the Samsung one were holding the Tab better.
But opinions do vary, of course.
---------- Post added at 09:37 AM ---------- Previous post was at 09:35 AM ----------
I just realised that OP looks for a keyboard snap on without the keyboard, sorry. With the book Cover you still need to take the back part of the keyboard Cover off.
corwin_amber said:
Like @techops said, you are looking for the Samsung BT860 Book Cover. It is not cheap but perfectly worth the price.
Click to expand...
Click to collapse
Guys... I'm not looking for that.... let me try to explain...
The cover you suggest is a ONE piece cover.... the keyboard cover Samsung offers (https://www.amazon.com/gp/product/B07VZHQ2WF/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1) is a TWO piece cover... this is the cover I own... this cover "sticks" to the back of the tablet on one side and the keyboard flap magnetically connects to it...
If I were to buy the cover you suggest, I'd need to "unstick" the back cover from the tablet and then fitted to the cover you suggest. The problem is the "stick part"..... this is design to stick once in order to work properly.
What we're trying to find is a "flap" only cover that wot allow us only to remove magnetically the "keyboard flap" from the cover I won, and magnetically connect a simple "flap" cover, without having to "unstick" from the back of the tablet itself...
I hope this clears things up.. thanks!
edit: grammar
Ah, the thing I didn't know I needed
Know exactly what you mean... With the S3 I bought the bookcover because the keyboard cover made it a bit too bulky and I hardly used the keyboard itself. With the S6 I just have the keyboard cover and overall I like it (also, just pulling off the keyboard itself is easy and solves my main bulkiness issue when I don't need it at that moment. But a 'flap-only' would be great to just snap on for that extra protection and minimal bulk.
dagrim1 said:
ah, the thing i didn't know i needed
know exactly what you mean... With the s3 i bought the bookcover because the keyboard cover made it a bit too bulky and i hardly used the keyboard itself. With the s6 i just have the keyboard cover and overall i like it (also, just pulling off the keyboard itself is easy and solves my main bulkiness issue when i don't need it at that moment. But a 'flap-only' would be great to just snap on for that extra protection and minimal bulk.
Click to expand...
Click to collapse
exactly!!! Lol
Chaleman said:
exactly!!! Lol
Click to expand...
Click to collapse
Well, ordered a cheap cover on ebay:
https://www.ebay.nl/itm/For-Samsung...353929?hash=item2161c70609:g:-8EAAOSwOOpdcNyE
Which I'll be cutting and trying to see if I can use the flap, add some magnets and dunno to see if I can make this work Worth a try for 10 euros and wouldn't use the case itse;f because the spen would just be hanging there without any cover/protection it seems.
coool!!! please keep us informed!!!!
Chaleman said:
coool!!! please keep us informed!!!!
Click to expand...
Click to collapse
Well, that failed
Thing is there seems to be a set of magnets in the tablet which are faced North/South/North/South... (so alternating orientation). I only had a few magnets to play around with but couldn't get the cover to stick.
THink too sturdy and not enough magnetic strength. Also, how to properly get the magnets to stuck on the case was a bit of a riddle to me, supergluing or something... (and not knowing if and how I might mess up the tablet by randomly putting magnets against it kinda stopped me from going too far).
So yeah, I'll leave it alone for now and just ordered the normal book cover as well... just in case.
A seperate flap would be a great product and solution though!
dagrim1 said:
Well, that failed
Thing is there seems to be a set of magnets in the tablet which are faced North/South/North/South... (so alternating orientation). I only had a few magnets to play around with but couldn't get the cover to stick.
THink too sturdy and not enough magnetic strength. Also, how to properly get the magnets to stuck on the case was a bit of a riddle to me, supergluing or something... (and not knowing if and how I might mess up the tablet by randomly putting magnets against it kinda stopped me from going too far).
So yeah, I'll leave it alone for now and just ordered the normal book cover as well... just in case.
A seperate flap would be a great product and solution though!
Click to expand...
Click to collapse
Hi. I agree 110% with you.. just bought a regular cover myself and some slim double sided tape for when I want to reattach the keyboard cover and make sure it sticks...
Carlos
dagrim1 said:
Well, that failed
Thing is there seems to be a set of magnets in the tablet which are faced North/South/North/South... (so alternating orientation). I only had a few magnets to play around with but couldn't get the cover to stick.
THink too sturdy and not enough magnetic strength. Also, how to properly get the magnets to stuck on the case was a bit of a riddle to me, supergluing or something... (and not knowing if and how I might mess up the tablet by randomly putting magnets against it kinda stopped me from going too far).
So yeah, I'll leave it alone for now and just ordered the normal book cover as well... just in case.
A seperate flap would be a great product and solution though!
Click to expand...
Click to collapse
Gotta be careful with cheap after market cases and magnets. Some have reportedly interfered with the S-pen. You would be drawing on screen and the marks would not show up on certain sections of the screen.
Anyway I understand why you want the back cover because it's slippery when holding tablet without a cover. In my honest opinion the Samsung Book Cover without the keyboard is the best quality option out there. You could easily do what you want with it by cutting off the front. The tablet easily attached to the back perfectly every time.
I don't have your dilema though as I have separate Bluetooth keyboard and mouse and I just use the whole book cover. I use the Illuminated Logitech K810 Keyboard and the MX Anywhere 2S Mouse.
Paul_Deemer said:
Gotta be careful with cheap after market cases and magnets. Some have reportedly interfered with the S-pen. You would be drawing on screen and the marks would not show up on certain sections of the screen.
Anyway I understand why you want the back cover because it's slippery when holding tablet without a cover. In my honest opinion the Samsung Book Cover without the keyboard is the best quality option out there. You could easily do what you want with it by cutting off the front. The tablet easily attached to the back perfectly every time.
I don't have your dilema though as I have separate Bluetooth keyboard and mouse and I just use the whole book cover. I use the Illuminated Logitech K810 Keyboard and the MX Anywhere 2S Mouse.
Click to expand...
Click to collapse
Yeah I know... And yeah, would wish the keyboard cover used magnets as well just like the book cover (worked fine in the s3 as well so no clue why they changed it). But I do really like the keyboard cover actually, so that is the best for me as I don;t have a desire to walk around with seperate keyboard/mouse or use bluetooth for the connection.