Model name: Galaxy S7 Edge
Model: SM-G935F/FD
Version: Android 7.0
TWRP Flashable: YES
Pre-rooted : YES
Stock ROM: Yes.Is Stock but Deknoxed and Microsoft and Google apps removed
Instruction:-
Download the pre-rooted Nougat ROM & the Modem/BL and TWRP files. Transfer ROM and Bootloader filesto the internal storage or External SD of your device. (My Pref Exsd)
Now Boot to Download Mode (Press and hold Power + Home + Volume Down)
Flash TWRP Using AP Option in Odin 3.11.1
Now Boot in to TWRP (Press and hold Power + Home + Volume Up)
Now Flash Nougat rom first, and after finish installing rom, now select Modem&Bootloader zip , and flash it.
After its done... wipe dalvik cache.... and reboot system.
DONE....
100% Working. Tested.
Download
Screenshots?
Looks good, downloading now:good:
my phone is not yet rooted. can i follow this instruction to be rooted and updated to nougat as well?
Private mod not work
What are the features?
Any credits? What root does it use? Is it ZPKK?
Private mod not work
Is there a non rooted version for SM-935FD ?
I might have to send in my s7 edge for warranty claim (purple vertical line on the screen)
Dont want the 'root' to effect my warranty claim.
---------- Post added at 06:49 PM ---------- Previous post was at 06:34 PM ----------
this works well for a daily driver ?
Related
Installed firmware drZMIUIv4 beta5. Now the phone bootloop. Can not get into recovery. Instead, on the phone trying to boot.
http://forum.xda-developers.com/showthread.php?t=1449156
Bootloop
hi i have the same problem i try to go into boot recovery and get the big yellow downloading sign. reboot again and it switches the phone off .
CAN ANY ONE HELP US PLEASE
MANY thanks..
all ok.
I already solved this problem.
1. Flash FW via odin
2. Recovery
3. Full wipe + dalvik + format system
4. Flash drZMIUIv4
5. Bootloop
6. Goung to recovery (5.5.0.4)
7. Full wipe + dalvik + format system
8. Flash drZMIUIv4
9. All ok )
Bootloop
hi i have the same problem but i was trying to do a Samsung update in kies. i try to go into boot recovery and get the big yellow downloading sign. reboot again and it switches the phone off switch it on and bootloop.
CAN ANY ONE HELP US PLEASE
MANY thanks..
---------- Post added at 10:48 PM ---------- Previous post was at 10:43 PM ----------
sorry you lost me with that one??
Flash a firmware via Odin > CWM > STOCK CM7/MIUI (Very important) > Miui ICS
Going from sammy to ICS will not work, make sure you flash a CM7 stock or MIUI stock build.
Also when installing CM7/miui from sammy rom if you get bootloop tap battery out and redo it, problem when updating CWM
I had the same issue.
I flashed stock GB ROM via ODIN, then flashed kernel with CF-ROOT.
In recovery I installed vanilla MIUI, then restored my nandroid backup, but I won't install BETA4/5 until it gets fixed.
on the last pages of the thread is a "zimage" flash this via odin and you have ur recovery back -
i've got a problem with sim-card reading. went back to beta4.
Hi everyone.
I followed this instructions:
•Download xxx-signed.zip kernel matching your ROM
•Put the previously downloaded xxx-signed.zip file on your external sd card
•Boot into stock recovery (volume up+home+power)
•Select "apply update from external storage".
•Now select the xxx-signed.zip file you copied in previous step
•You are rooted + new PhilZ-cwm6 kernel with CWM6
From this post http://forum.xda-developers.com/showthread.php?t=1901191
I "think" I succesfully installed this CMW, because I can hold volume up+home+power and see the pictures shown in the post linked above.
BUT, WHEN I TRY TO START MY PHONE, IT JUST SHOW ME THE "SAMSUNG GALAXY NOTE" LOGO (AS IF IT WOULD START) AND THEN ALL BLACK AGAIN.
I can see the pictures of the "CWM Base Vertion: 6.0.1.9" as shown in the post linked above.
I even click on the icon reboot system now, and nothing.
The questions here guys are:
Am I rooted now?
Why is my phone failing start?
I tried to do the second part:
•boot into download mode
•start odin3 and configure it as in picture below
•connect phone in download mode to PC via USB
•press start to flash the tar.md5 package
And still nothing.
Am I missing a ROM i.e. ....md5 file?
Is there a way to restore the phone by factory settings and start again?
Any advise on how to solve this issue, will appreciated.
Thanks guys
What Rom are you on?
You can always put the phone in download mode and flash a stock roms to get back to stock ics or GB rom
nokiamodeln91 said:
What Rom are you on?
You can always put the phone in download mode and flash a stock roms to get back to stock ics or GB rom
Click to expand...
Click to collapse
I´m not sure I have right now a ROM, maybe thats the problem, is there any way to know if I have a ROM installed?
Also I am having difficulties with Odin3 (only runs on PC) and also having trouble with the similar for the MAC.
Question
Can I take out my micro SD Card, add the ROM, insert again the micro SD Card... instead going with the download mode?
Thanks for your help.
:good:
Yes use any custom Rom, add to sd and flash it from recovery
---------- Post added at 05:39 AM ---------- Previous post was at 05:38 AM ----------
If you haven't formatted anything then the Rom should be there
Xperia Tablet Z 4.4.4 KitKat 10.5.1.A.0.292 Customized NCB and UK
Pre-rooted - Includes Recovery - Wiping is optional
For SGP311
** DISCLAIMER: I AM NOT A DEVELOPER. I DO THIS AS A HOBBY AND SHARE MY FINDINGS IN CASE SOMEONE ELSE FINDS THEM USEFUL. **
** THIS WORKED ON MY DEVICE BUT IT MAY NOT WORK ON YOURS. APPLY AT YOUR OWN RISK **
Requirements:
Flashtool 0.9.15.0 or higher
Rooted SGP311 (on any other previous Android version) with custom recovery (i.e. XZDualRecovery) installed.
Previous firmwares up to 4.4.2 can be rooted with towelroot.
If your current Rom doesn't have recovery, follow step 10 of this post: http://forum.xda-developers.com/showpost.php?p=53063218&postcount=14 with tablet in USB debugging mode (step 4 of the same post).
This works on locked or unlocked bootloaders and any customization.
This ROM is pre-rooted and comes with recovery. Other than that it is identical to stock rom.
Download links:
SGP311 10.5.1.A.0.292 Customized_NCB https://mega.co.nz/#F!A5k3jB7K!S6pviwMzrWST5X1T6YKZRw
SGP311 10.5.1.A.0.292 Customized_UK https://mega.co.nz/#F!Zs1jgKzT!_1rWE5r7XSEhJe541a8crg
You only need the zip and ftf files. The txt file is just the checksum if you want to verify that your download is error-free.
Instructions:
0- Backup before you start messing with your tablet!
1- Put system.flashable.zip in /sdcard of your tablet.
2- Keep SGP311_10.5.1.A.0.292_Customized_XXX.ftf on your PC.
3- Disconnect any USB cable that may be attached to your tablet.
4- Reboot to recovery. Preferably to TWRP, but you can make CWM work too.
5- Do not wipe anything.
6- Once in recovery, flash system.flashable.zip.
7- It is important to TURN OFF the tablet after this step.
8- Find and use the Power Off option in the recovery and turn your tablet off. In CWM based PhilZ Touch it is under "Power Options" -> "Power Off". In TWRP it is under "Reboot" -> "Power Off". If you see your tablet rebooting, force it to turn off by pushing the power and volume up keys simultaneously and wait for the white LED to blink 3 times (or however else you can!)
9- Open Flashtool 0.9.15.0 (or higher) and click on the flash icon. Choose flash mode.
10- Navigate to where you have saved SGP311_10.5.1.A.0.292_Customized_XXX.ftf
11- If you do not want your any of your current data to be wiped uncheck all the items under the "wipe" section. My recommendation however is to wipe.
12- Now flash this ftf with your tablet in flash mode. To put your tablet in flash mode, make sure it is off, then hold the volume down button and then connect it with the USB cable to the PC.
13- Reboot. You are now on rooted 4.4.4, firmware 10.5.1.A.0.292.
Battery Drain Issues
Please note that, according to Sony, any firmware shipped with Google Play Services version 4.4.52 has a battery drain issue ( http://talk.sonymobile.com/t5/Xperi...-Drain-issue-Workaround-Fix/m-p/708273#M42303 ). This problem has been known since around June and surprisingly Sony has not updated the Play services in this firmware. To avoid battery drain please update your Google Play Services as soon as you are done flashing.
Credits:
I only put the files together. All the credit should go to XDA's [NUT] and DooMLoRD and many others...
I've Just upgraded from 10.5.1.A.0.283 without any wipe. All Ok!!
Thank you very much ,it worked again perfect !
deleted
is this fw availabile for sgp321?
also prerooted?
androiduser44 said:
is this fw availabile for sgp321?
also prerooted?
Click to expand...
Click to collapse
you can download .ftf with XperFirm and make prerooted out of it with PRFCreator.
any idea if this also works for SGP312?
This is a guide as I was finally able to root my phone. Every time I tried to root through CF it soft-bricked with a red android and would not boot ( If your in this state, use odin and flash the stock firmware from sammoble). I am no master at flashing but I did spend days on end and this method should be fool proof. For me the other ways of flashing the galaxys2bell file did not root it.
I am not responsible for any damage you do to your phone. ( Nothing should happen but just to cover my AS)
For ROOT:
1. Download Odin3 v1.85 and flash the latest version of Clockwork Recovery HERE
2. Unzip Odin and CWM
2 1/2 . Boot the phone into Download Mode. ( Shutdown, then hold Power + Volume Down)
3. Plug in your phone and you should see that a yellow box is filled up with a COM#
4. Insert the latest version of the Clockwork Recovery in the BOOT-LOADER make sure it is ticked and flash away.
5. Remove the battery after Odin says PASS
6. Put the battery back in and hold the Power + Volume Down + Volume Up until you see it boot with letters on the screen, let go and wait for 20 seconds.
7. If it is booted into recovery restart the phone and go into the google play store.
8. Download SuperSU
9. Open the app and select "TWRP/CWM method" on the popup
10. The phone should automatically restart and go into recovery, it should install the SU binaries
11. Enjoy your Custom recovery and your SU privileges
For CUSTOM ROM:
(Have a Modem for JB)
1. Boot into CWM, make sure you have the latest version 6.00^. (Shutdown then hold the Power + Volume Down + Volume Up)
2. Wipe/ Factory Reset Option > Install a New Rom
3. Install a zip option > Locate the SD card with your ROM , GAPPS, and MODEM
4. Install the MODEM FIRST
5. Install the ROM SECOND
5. Install GAPPS THIRD
For XPOSED ( For KK or Lower)
1. Go to the Xposed's website and download the Xposed Installer (Not on the play store)
2. Go into settings and allow installation of unknown applications.
3. Install the Xposed installer.
4. Open the app and give it SU permissions.
5. Phone will automatically reboot and install Xposed.
6. Install modules and enjoy.
Rom I currently use: Slim KitKat.
I recommend you find micro-gapps for kitkat.
IF ANYTHING DOES GO WRONG just don't panic. Try and boot your phone into download mode and flash the stock Firmware.
epeglab said:
This is a guide as I was finally able to root my phone. Every time I tried to root through CF it soft-bricked with a red android and would not boot ( If your in this state, use odin and flash the stock firmware from sammoble). I am no master at flashing but I did spend days on end and this method should be fool proof. For me the other ways of flashing the galaxys2bell file did not root it.
I am not responsible for any damage you do to your phone. ( Nothing should happen but just to cover my AS)
For ROOT:
1. Download Odin3 v1.85 and flash the latest version of Clockwork Recovery HERE
2. Unzip Odin and CWM
2 1/2 . Boot the phone into Download Mode. ( Shutdown, then hold Power + Volume Down)
3. Plug in your phone and you should see that a yellow box is filled up with a COM#
4. Insert the latest version of the Clockwork Recovery in the BOOT-LOADER make sure it is ticked and flash away.
5. Remove the battery after Odin says PASS
6. Put the battery back in and hold the Power + Volume Down + Volume Up until you see it boot with letters on the screen, let go and wait for 20 seconds.
7. If it is booted into recovery restart the phone and go into the google play store.
8. Download SuperSU
9. Open the app and select "TWRP/CWM method" on the popup
10. The phone should automatically restart and go into recovery, it should install the SU binaries
11. Enjoy your Custom recovery and your SU privileges
For CUSTOM ROM:
(Have a Modem for JB)
1. Boot into CWM, make sure you have the latest version 6.00^. (Shutdown then hold the Power + Volume Down + Volume Up)
2. Wipe/ Factory Reset Option > Install a New Rom
3. Install a zip option > Locate the SD card with your ROM , GAPPS, and MODEM
4. Install the MODEM FIRST
5. Install the ROM SECOND
5. Install GAPPS THIRD
For XPOSED ( For KK or Lower)
1. Go to the Xposed's website and download the Xposed Installer (Not on the play store)
2. Go into settings and allow installation of unknown applications.
3. Install the Xposed installer.
4. Open the app and give it SU permissions.
5. Phone will automatically reboot and install Xposed.
6. Install modules and enjoy.
Rom I currently use: Slim KitKat.
I recommend you find micro-gapps for kitkat.
IF ANYTHING DOES GO WRONG just don't panic. Try and boot your phone into download mode and flash the stock Firmware.
Click to expand...
Click to collapse
will there be any unofficial builds of android lolipop for this device or is it done? Im just wondering because the original s2 gets a lot of support so I think this one should too.
bevertin99 said:
will there be any unofficial builds of android lolipop for this device or is it done? Im just wondering because the original s2 gets a lot of support so I think this one should too.
Click to expand...
Click to collapse
There is no more official support for our S2 AFAIK, although in the FAQ I remember reading something about our model having the ability to flash Roms built for another kind of S2. Don't take my word as Bible, but it's possible I think. In short, no official support, but there is still hope. Check out the skyrocket model of the S2.
Sent from my SM-G900W8 using Tapatalk
hey bro should i root first or custom rom first thanks in advance
JazzROM For Samsung Galaxy Tab S2/SM-T713 Nougat 7.0
A custom ROM based on official firmware Samsung Galaxy Tab S2/SM-T713 Nougat 7.0 (XAR- USA version)
[Deodexed, Deknoxed, Rooted, Internal Encryption off, Init.d, Su.d, etc..etc..all good stuff you will find in pretty much every good custom ROMs..]
Nobody is allowed to take stuff from my rom without asking me! Thank you.
A fair warning before you jump on and flash this ROM: Installing this Rom will void warranty. Installing TWRP will trip knox to 0x1! Secure folder will be unusable.
Prerequisites / What you need:
1 - No brainier that flashing custom ROMs requires a custom recovery, we use TWRP 3.1.0-1 - look here @ashyx thread download for your device.
2 - If you are still on official firmware and never rooted, maybe it is time to get into custom recovery! - so get that one going..have question about TWRP, please ask @ashyx thread, not here.
3 - Now that you have fully working TWRP installed, it is good time to do full nandroid backup and save that to your microSD card and your computer (in case all goes wrong, you can restore it)
4 - Keep in mind that we developer always assume you know what you are doing since you are here and interested flashing custom ROMs!
5- Remember that do not set read-only mode system in TWRP
6- Are we good up to this point? if yes, then proceed to installation step!
Installation:
-- Of course, do full nandroid backup!!!!!, dont blame ROM developer if something goes awfully wrong..so do full backup!!
1 - Then, first download JazzROM-SM-T713.NOUGAT.7.0.DEODEX.V1.zip copy it to your tablet's internal sdcard or microSD card.
2 - Reboot in to TWRP, and do Data Format [Wipe]/[FormatData], type "yes", and once it done, go back to main screen
3 - In TWRP main screen, -->Wipe-->Advanced Wipe, and check only; "System", "Data", "Cache", and "Dalvik/Art cache" - do NOT select any other options!, once it done, go back to main screen.
4- In TWRP main screen, select Install, and Select Storage where you saved JazzROM-SM-T713.NOUGAT.7.0.DEODEX.V1.zip in first step above, and select "JazzROM-SM-T713.NOUGAT.7.0.DEODEX.V1.zip" then swipe to confirm flash and wait until it finishes...
5- Reboot to System, don't be alarmed, you may get couple boot-loops (for me it happened 2 times) with SuperSU-v2.82, this is normal.
6- Now, while your tablet is rebooting, go get coffee or read a short book or watch something, it is going to take several minutes (5 to 15 min.)
7- Once reboots, go thru the setup of tablet as you normally do.
8- If all goes fine, you should be running stock base deodexed Nougat 7.0 ROM!
Download Links:
====>DOWNLOAD: JazzROM-SM-T713 V1.0
reserved
just in case
Nice, will try it.
Looking forward to test this as soon as I get a soft bricked Tab S2 that I will try to resuscitate.
Don't pass the bootlogo
Same here, stuck on bootlogo.
Due to complaints about boot logo freeze i haven't tried to test the rom yet. Any feedback from the developer?
RIP OP
JazzROM saved the day
My Galaxy Tab S2 SM-713 Nougat developed a FRP
---------- Post added at 07:36 PM ---------- Previous post was at 07:26 PM ----------
My Galaxy Tab S2 SM-713 Nougat developed a FRP block after rooting which bricked it. I wanted to reflash the original rom but unfortunately I never copied the id number from the tablet
After lots of searching, I found this "generic" JazzRom and downloaded the zip file which I then converted to a tar.md5 file. I then used ODIN to flash my tablet (fortunately the upload mode wasn't bricked).
Flashing proceeded normally and when done, the tablet booted fairly quickly back and everything looked as if it never was bricked.
I know I should probably do a full factory reset ad restore all my apps from my backup but everything is working so smoothly so I'll do that tomorrow.
Thanks for the excellent job.
cannot open the androidfilehost
My Samsung Tab S2 (8.0) SM-T713 Running 7.0 downgrade to 6.0.1
Hi guys! Newbie here.
Just want to ask if it is possible to downgrade my tablet that is running on OS 7.0 to Stock rom or on atleast OS 6.0?
The OS 7.0 was updated using OTA and it really drains my battery just want to roll back again on the stock or on the previous version.
Please help.
Thank you so much.
Help ROM samsung tab s2 8.0 32gb SM-T713
Hi, I need your help.
I would like a free rom for my tablet samsung tab s2 8.0 SM-T713 2015.
I've already put several rom's but none worked.
I need your help urgently, please.
Thanks